FCC ID: PD911230BNHU Intel Centrino Wireless-N 1030

by: Intel Corporation latest update: 2011-08-27 model: 11230BNHU

Eight grants have been issued under this FCC ID from 10/13/2010 to 08/27/2011 (this is one of eighty-five releases in 2011 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, instructions, troubleshooting guides, drivers, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 7 8 User Manual 1 Users Manual pdf 751.87 KiB
1 2 3 4 5 6 7 8 User Manual 2 Users Manual pdf 3.19 MiB
1 2 3 4 5 6 7 8 Internal Photos Internal Photos pdf 1.91 MiB December 10 2010 / October 04 2011
1 2 3 4 5 6 7 8 External Photos External Photos pdf 1.91 MiB December 10 2010 / October 04 2011
1 2 3 4 5 6 7 8 Label and Location ID Label/Location Info pdf 744.61 KiB
1 2 3 4 5 6 7 8 Authorization Letter Cover Letter(s) pdf 18.00 KiB
1 2 3 4 5 6 7 8 Confidentiality Letter Cover Letter(s) pdf 20.55 KiB
1 2 3 4 5 6 7 8 Permissive Change Letter Cover Letter(s) pdf 16.38 KiB
1 2 3 4 5 6 7 8 RF Exposure Info pdf
1 2 3 4 5 6 7 8 RF Exposure Info pdf
1 2 3 4 5 6 7 8 Test Setup Photos pdf
1 2 3 4 5 6 7 8 Test Setup Photos pdf
1 2 3 4 5 6 7 8 RF Exposure Info pdf July 07 2011
1 2 3 4 5 6 7 8 Test Setup Photos pdf July 07 2011 / March 01 2012
1 2 3 4 5 6 7 8 RF Exposure Info pdf
1 2 3 4 5 6 7 8 RF Exposure Info pdf
1 2 3 4 5 6 7 8 RF Exposure Info pdf
1 2 3 4 5 6 7 8 RF Exposure Info pdf
1 2 3 4 5 6 7 8 RF Exposure Info pdf
1 2 3 4 5 6 7 8 Cover Letter Cover Letter(s) pdf 51.59 KiB December 10 2010
1 2 3 4 5 6 7 8 Modular Approval Letter Cover Letter(s) pdf 22.13 KiB December 10 2010
1 2 3 4 5 6 7 8 RF Exposure Info pdf December 10 2010
1 2 3 4 5 6 7 8 Test Report pdf December 10 2010
1 2 3 4 5 6 7 8 Test Report pdf December 10 2010
1 2 3 4 5 6 7 8 Passive Scan Attestation Cover Letter(s) pdf 16.03 KiB December 10 2010
1 2 3 4 5 6 7 8 Test Report pdf December 10 2010
1 2 3 4 5 6 7 8 User Manual 1 Users Manual pdf 751.87 KiB
1 2 3 4 5 6 7 8 User Manual 2 Users Manual pdf 3.19 MiB
1 2 3 4 5 6 7 8 Internal Photos Internal Photos pdf 1.91 MiB December 10 2010 / October 04 2011
1 2 3 4 5 6 7 8 External Photos External Photos pdf 1.91 MiB December 10 2010 / October 04 2011
1 2 3 4 5 6 7 8 Label and Location ID Label/Location Info pdf 744.61 KiB
1 2 3 4 5 6 7 8 Authorization Letter Cover Letter(s) pdf 18.00 KiB
1 2 3 4 5 6 7 8 Confidentiality Letter Cover Letter(s) pdf 20.55 KiB
1 2 3 4 5 6 7 8 Permissive Change Letter Cover Letter(s) pdf 16.38 KiB
1 2 3 4 5 6 7 8 Cover Letter Cover Letter(s) pdf 51.59 KiB December 10 2010
1 2 3 4 5 6 7 8 Modular Approval Letter Cover Letter(s) pdf 22.13 KiB December 10 2010
1 2 3 4 5 6 7 8 Passive Scan Attestation Cover Letter(s) pdf 16.03 KiB December 10 2010

frequency equipment class purpose
1 2011-08-27 2422 ~ 2452 DTS - Digital Transmission System Class II Permissive Change
2 2011-07-07 2422 ~ 2452 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2011-04-28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2422 ~ 2452 DTS - Digital Transmission System
6 2010-10-13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Original Equipment
7 JBP - Part 15 Class B Computing Device Peripheral
8 2412 ~ 2462 DTS - Digital Transmission System

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 8 Effective 2011-08-27
1 2 3 4 5 6 7 8 2011-07-07
1 2 3 4 5 6 7 8 2011-04-28
1 2 3 4 5 6 7 8 2010-10-13
1 2 3 4 5 6 7 8 Applicant's complete, legal business name Intel Corporation
1 2 3 4 5 6 7 8 FCC Registration Number (FRN) 0008035131
1 2 3 4 5 6 7 8 Physical Address 100 Center Point Circle Suite 200
1 2 3 4 5 6 7 8 100 Center Point Circle
1 2 3 4 5 6 7 8 Columbia
1 2 3 4 5 6 7 8 United States
app s TCB Information
1 2 3 4 5 6 7 8 TCB Application Email Address h******@acbcert.com
1 2 3 4 5 6 7 8 h******@atcb.com
1 2 3 4 5 6 7 8 H******@atcb.com
1 2 3 4 5 6 7 8 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6 7 8 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
1 2 3 4 5 6 7 8 Grantee Code PD9
1 2 3 4 5 6 7 8 Equipment Product Code 11230BNHU
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 8 Name S******** C******** H********
1 2 3 4 5 6 7 8 Title Product Regulations Engineer
1 2 3 4 5 6 7 8 Telephone Number 803-3********
1 2 3 4 5 6 7 8 Fax Number 803-2********
1 2 3 4 5 6 7 8 E-mail s******@intel.com
app s Technical Contact
1 2 3 4 5 6 7 8 Firm Name AT4 Wireless
1 2 3 4 5 6 7 8 Compliance Certification Services
1 2 3 4 5 6 7 8 Intel Corporation
1 2 3 4 5 6 7 8 Name R******** O********
1 2 3 4 5 6 7 8 M**** H****
1 2 3 4 5 6 7 8 S**** H********
1 2 3 4 5 6 7 8 Physical Address Parque Tecnologico de Andalucia
1 2 3 4 5 6 7 8 47173 Benicia Street
1 2 3 4 5 6 7 8 100 Center Point Circle STE 200
1 2 3 4 5 6 7 8 Campanillas-Malaga, 29590
1 2 3 4 5 6 7 8 Fremont, California 94538
1 2 3 4 5 6 7 8 Columbia, 29210
1 2 3 4 5 6 7 8 Columbia, South Carolina 29210
1 2 3 4 5 6 7 8 Spain
1 2 3 4 5 6 7 8 United States
1 2 3 4 5 6 7 8 Telephone Number 34952********
1 2 3 4 5 6 7 8 510-7********
1 2 3 4 5 6 7 8 803 2********
1 2 3 4 5 6 7 8 Fax Number 34952********
1 2 3 4 5 6 7 8 510-6********
1 2 3 4 5 6 7 8 803 2********
1 2 3 4 5 6 7 8 E-mail r******@at4wireless.com
1 2 3 4 5 6 7 8 m******@ccsemc.com
1 2 3 4 5 6 7 8 s******@intel.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 8 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 8 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 8 No
1 2 3 4 5 6 7 8 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)02/21/2012
1 2 3 4 5 6 7 8 01/03/2012
1 2 3 4 5 6 7 8 04/10/2011
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 8 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 8 Equipment ClassDTS - Digital Transmission System
1 2 3 4 5 6 7 8 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 8 JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6 7 8 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Centrino Wireless-N 1030
1 2 3 4 5 6 7 8 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 7 8 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 8 Does not apply
1 2 3 4 5 6 7 8 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 7 8 Original Equipment
1 2 3 4 5 6 7 8 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 8 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 8 Grant CommentsPower Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 7mm for Laptop/Notebook /Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 7mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured SAR value at 7mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.53 W/kg.
1 2 3 4 5 6 7 8 Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 7.9mm for Laptop/Notebook /Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 7.9mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 7.9mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.413 W/kg.
1 2 3 4 5 6 7 8 Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 4 5 6 7 8 Power Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 0.8cm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 0.8cm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 0.8cm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.355 W/kg
1 2 3 4 5 6 7 8 Power output is conducted. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 4 5 6 7 8 Power Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. OEM installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 4 5 6 7 8 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 8 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 8 Firm Name DEKRA Testing and Certification, S.A.U.
1 2 3 4 5 6 7 8 Compliance Certification Services
1 2 3 4 5 6 7 8 Compliance Certification Services (UL CCS)
1 2 3 4 5 6 7 8 National Technical Systems
1 2 3 4 5 6 7 8 Name F**** C****
1 2 3 4 5 6 7 8 T****** C********
1 2 3 4 5 6 7 8 B**** J********
1 2 3 4 5 6 7 8 D******** B********
1 2 3 4 5 6 7 8 Telephone Number 34-95********
1 2 3 4 5 6 7 8 510-7********
1 2 3 4 5 6 7 8 510-7********
1 2 3 4 5 6 7 8 510-5********
1 2 3 4 5 6 7 8 Fax Number 34-95********
1 2 3 4 5 6 7 8 510-6********
1 2 3 4 5 6 7 8 510 5********
1 2 3 4 5 6 7 8 E-mail f******@dekra.com
1 2 3 4 5 6 7 8 t******@ccsemc.com
1 2 3 4 5 6 7 8 b******@ccsemc.com
1 2 3 4 5 6 7 8 d******@nts.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2412 2462 0.123
1 2 15C CC 2412 2462 0.118
1 3 15C CC 2412 2462 0.063
1 4 15C CC 2422 2452 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2412 2462 0.123
2 2 15C CC 2412 2462 0.118
2 3 15C CC 2412 2462 0.063
2 4 15C CC 2422 2452 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.0055
3 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.0055
4 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2412 2462 0.123
5 2 15C CC 2412 2462 0.118
5 3 15C CC 2412 2462 0.063
5 4 15C CC 2422 2452 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.003
6 2 15C CC 2402 2480 0.0055
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2412 2462 0.123
8 2 15C CC 2412 2462 0.118
8 3 15C CC 2412 2462 0.063
8 4 15C CC 2422 2452 0.035

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC