FCC ID: PD9622ANXHU Intel Centrino Wireless-N+WiMax 6250

Intel Wireless Adapter Information Guide Supported wireless adapters:

Intel Centrino Wireless-N 100 (Available for Windows* 7 only) Intel Centrino Wireless-N 105 (Available for Windows* 7 only) Intel Centrino Wireless-N 130 (Available for Windows* 7 only) Intel Centrino Wireless-N 135 (Available for Windows* 7 only) Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 (Available for Windows* 7 only) Intel Centrino Wireless-N 2230 (Available for Windows* 7 only) Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 (Not available for Windows Vista) Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internet connection. All of these features can be explored using a WiFi network in your home or office. This WiFi network solution is designed for both home and business use. Additional users and features can be added as your networking needs grow and change. This guide contains basic information about Intel adapters. It includes information about several adapter properties that you can set to control and enhance the performance of your adapter with your particular wireless network and environment. Intel wireless adapters enable fast connectivity without wires for desktop and notebook PCs. Adapter Settings Regulatory Information Specifications Important Information Support Warranty Glossary Depending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g, and 802.11n (draft 2.0) wireless standards. Operating at 5 GHz or 2.4 GHz frequency at data rates of up to 450 Mbps, you can now connect your computer to existing high-speed networks that use multiple access points within large or small environments. Your WiFi adapter maintains automatic data rate control according to the access point location and signal strength to achieve the fastest possible connection. All of your wireless network connections are easily managed by the WiFi connection utility. Profiles that are set up through the WiFi connection utility provide enhanced security measures with 802.1X network authentication. Information in this document is subject to change without notice. 20042011 Intel Corporation. All rights reserved. Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 USA The copying or reproducing of any material in this document in any manner whatsoever without the written permission of Intel Corporation is strictly forbidden. Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Intel disclaims any proprietary interest in trademarks and trade names other than its own. Microsoft and Windows are registered trademarks of Microsoft Corporation. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

*Other names and brands may be claimed as the property of others. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein.

"IMPORTANT NOTICE FOR ALL USERS OR DISTRIBUTORS:

Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all necessary local and governmental regulatory agency requirements for the regions that they are designated and/or marked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars, satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, and limit usage to avoid interference with these devices. In many instances Intel is required to provide test data to prove regional and local compliance to regional and governmental regulations before certification or approval to use the product is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully control parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include, without limitation, RF power, spectrum usage, channel scanning, and human exposure. For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format with the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, or code with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches, utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will be solely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under any theory of liability for any issues associated with the modified products, including without limitation, claims under the warranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assist in providing support to any third parties for such modified products. Note: Many regulatory agencies consider Wireless LAN adapters to be "modules", and accordingly, condition system-level regulatory approval upon receipt and review of test data documenting that the antennas and system configuration do not cause the EMC and radio operation to be non-compliant."

September 7, 2011 Back to Contents Adapter Settings The Advanced tab displays the device properties for the WiFi adapter installed on your computer. How to Access At the Intel PROSet/Wireless WiFi Connection Utility, Advanced Menu click Adapter Settings. Select the Advanced tab. WiFi Adapter Settings Description Name 802.11n Channel Width

(2.4 GHz) Description Set high throughput channel width to maximize performance. Set the channel width to Auto or 20MHz. Use 20MHz if 802.11n channels are restricted. This setting applies to 802.11n capable adapters only. 802.11n Channel Width

(5.2 GHz) NOTE: This setting does not apply to the Intel Wireless WiFi Link 4965AGN (uses 20 MHz channel width only). Set high throughput channel width to maximize performance. Set the channel width to Auto or 20MHz. Use 20MHz if 802.11n channels are restricted. This setting applies to 802.11n capable adapters only. NOTE: This setting does not apply to the following adapters:

Intel WiFi Link 1000 Intel Wireless WiFi Link 4965AGN 802.11n Mode The 802.11n standard builds on previous 802.11 standards by adding multiple-input multiple-

output (MIMO). MIMO increases data throughput to improve transfer rate. Select Enabled or Disabled to set the 802.11n mode of the WiFi adapter. Enabled is the default setting. This setting applies to 802.11n capable adapters only. NOTE: To achieve transfer rates greater than 54 Mbps on 802.11n connections, WPA2*-AES security must be selected. No security (None) can be selected to enable network setup and troubleshooting. Ad Hoc Channel An administrator can enable or disable support for high throughput mode to reduce power-

consumption or conflicts with other bands or compatibility issues. Unless the other computers in the ad hoc network use a different channel from the default channel, there is no need to change the channel. Value: Select the permitted operating channel from the list. 802.11b/g: Select this option when 802.11b and 802.11g (2.4 GHz) ad hoc band frequency is used. 802.11a: Select this option when 802.11a (5 GHz) ad hoc band frequency is used. This setting does not apply to the Intel WiFi Link 1000 adapter. Ad Hoc Power Management NOTE: When an 802.11a channel is not displayed, initiating ad hoc networks is not supported for 802.11a channels. Set power saving features for device to device (ad hoc) networks. Disable: Select when connecting to ad hoc networks that contain stations that do not support ad hoc power management Maximum Power Savings: Select to optimize battery life. Noisy Environment: Select to optimize performance or connecting with multiple clients. Ad Hoc QoS Mode Quality of Service (QoS) control in ad hoc networks. QoS provides prioritization of traffic from the access point over a wireless LAN based on traffic classification. WMM (Wi-Fi Multimedia) is the QoS certification of the Wi-Fi Alliance (WFA). When WMM is enabled, the WiFi adapter uses WMM to support priority tagging and queuing capabilities for Wi-Fi networks. WMM Enabled (Default) WMM Disabled Fat Channel Intolerant This setting communicates to surrounding networks that this WiFi adapter is not tolerant of 40MHz channels in the 2.4GHz band. The default setting is for this to be turned off (disabled), so that the adapter does not send this notification. NOTE: This setting does not apply to the following adapters:

Intel Wireless WiFi Link 4965AG_ Intel PRO/Wireless 3945ABG Network Connection Mixed mode protection Power Management Use to avoid data collisions in a mixed 802.11b and 802.11g environment. Request to Send/Clear to Send (RTS/CTS) should be used in an environment where clients may not hear each other. CTS-to-self can be used to gain more throughput in an environment where clients are in close proximity and can hear each other. Lets you select a balance between power consumption and WiFi adapter performance. The WiFi adapter power settings slider sets a balance between the computer's power source and the battery. Use default value: (Default) Power settings are based on the computer's power source. Manual: Adjust the slider for the desired setting. Use the lowest setting for maximum battery life. Use the highest setting for maximum performance. Roaming Aggressiveness NOTE: Power consumption savings vary based on Network (Infrastructure) settings. This setting lets you define how aggressively your wireless client roams to improve connection to an access point. Throughput Enhancement Transmit Power Default: Balanced setting between not roaming and performance. Lowest: Your wireless client will not roam. Only significant link quality degradation causes it to roam to another access point. Highest: Your wireless client continuously tracks the link quality. If any degradation occurs, it tries to find and roam to a better access point. Changes the value of the Packet Burst Control. Enable: Select to enable throughput enhancement. Disable: (Default) Select to disable throughput enhancement. Default Setting: Highest power setting. Lowest: Minimum Coverage: Set the adapter to the lowest transmit power. Enables you to expand the number of coverage areas or confine a coverage area. Reduces the coverage area in high traffic areas to improve overall transmission quality and avoids congestion and interference with other devices. Highest: Maximum Coverage: Set the adapter to a maximum transmit power level. Select for maximum performance and range in environments with limited additional WiFi radio devices. NOTE: The optimal setting is for a user to always set the transmit power at the lowest possible level that is still compatible with the quality of their communication. This allows the maximum number of wireless devices to operate in dense areas and reduce interference with other devices that it shares the same radio spectrum with. NOTE: This setting takes effect when either Network (Infrastructure) or Device to Device (ad hoc) mode is used. Wireless Mode Select which mode to use for connection to a wireless network:

802.11a only: Connect the wireless WiFi adapter to 802.11a networks only. Not applicable for all adapters. 802.11b only: Connect the wireless WiFi adapter to 802.11b networks only. Not applicable for all adapters. 802.11g only: Connect the wireless WiFi adapter to 802.11g networks only. 802.11a and 802.11g: Connect the WiFi adapter to 802.11a and 802.11g networks only. Not applicable for all adapters. 802.11b and 802.11g: Connect the WiFi adapter to 802.11b and 802.11g networks only. Not applicable for all adapters. 802.11a, 802.11b, and 802.11g: (Default) - Connect to either 802.11a, 802.11b or 802.11g wireless networks. Not applicable for all adapters. OK Cancel NOTE: These wireless modes (Modulation type) determine the discovered access points displayed in the WiFi Networks list Saves settings and returns to the previous page. Closes and cancels any changes. Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Specifications Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 Intel Centrino Wireless-N 100, Intel Centrino Wireless-N 105, Intel Centrino Wireless-N 130 and Intel Centrino Wireless-N 135 Form Factor Dimensions PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius Antenna Interface Connector Antenna Diversity On-board diversity Connector Interface Voltage Operating Temperature Humidity WiFi Frequency Modulation Frequency band Modulation Wireless Medium Channels IEEE 802.11n Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data 11, 5.5, 2, 1 Mbps 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. MIMO Configuration: 1X1 CCK, DQPSK, DBPSK Tx/Rx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps Rates Bluetooth Support Intel Centrino Wireless-N 100: None Intel Centrino Wireless-N 105: None Intel Centrino Wireless-N 130: Bluetooth 2.1, 2.1 + EDR, 3.0, 3.0+HS Intel Centrino Wireless-N 135: Bluetooth 4.0 (Bluetooth Low-Energy and Bluetooth 3.0 +HS) Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-

Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions, v4.0 General Operating Systems Windows* 7 (32-bit and 64-bit) Wi-Fi Alliance*

certification Cisco Compatible Extensions certification IEEE Feature Sets Architecture Security IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA UL, C-UL, CB (IEC 60590) Product Safety Intel WiFi Link 1000 WiFi / WiMAX Form Factor SKUs Dimensions Antenna Interface Connector Antenna Diversity Connector Interface Voltage Operating Temperature Humidity WiFi Frequency Modulation Frequency band Modulation Wireless Medium Channels IEEE 802.11n Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data PCI Express* Mini Card and Half-Mini Card Intel WiFi Link 1000 - 1X2 MC/HMC Mini Card: Width 2.0 in x Length 1.18 in x Height 0.18 in (50.80 mm x 30 mm x 4.5 mm) Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 90% non-condensing (at temperatures of 25 C to 35 C) 2.4 GHz (802.11b/g/n) 2.41-2.474 GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Rates WiFi General Operating Systems Wi-Fi Alliance*

certification Cisco Compatible Extensions certification WLAN Standard Architecture Security Encryption Product Safety Microsoft Windows* XP (32 and 64 bit) and Windows Vista* (32 and 64 bit), Ubuntu Linux*

Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions, v4.0 IEEE 802.11g, 802.11b, 802.11n, 802.11d, 802.11e, 802.11i, Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, 802.1X: EAP-SIM, LEAP, PEAP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA AES-CCMP 128-bit, WEP 128-bit and 64-bit, CKIP, TKIP UL, C-UL, CB (IEC 60590) Intel Centrino Wireless-N 2200 and Intel Centrino Wireless-N 2230 Form Factor Dimensions PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius Antenna Interface Connector Antenna Diversity On-board diversity Connector Interface Voltage Operating Temperature Humidity WiFi Frequency Modulation Frequency band Modulation Wireless Medium Channels IEEE 802.11n Data Rates 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. MIMO Configuration: 2X2 CCK, DQPSK, DBPSK IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth Support Tx/Rx: 300, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Centrino Wireless-N 2200: None Intel Centrino Wireless-N 2230: Bluetooth 4.0 (Bluetooth Low-Energy and Bluetooth 3.0 +HS) Product Safety Form Factor Dimensions Antenna Interface Connector Antenna Diversity Network Standards Connector Interface Voltage Operating Temperature Humidity WiFi Network Standards General Operating Systems Windows* 7 (32-bit and 64-bit) Wi-Fi Alliance*

certification Cisco Compatible Extensions certification IEEE Feature Sets Architecture Security Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-

Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions, v4.0 IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA UL, C-UL, CB (IEC 60590) Intel Centrino Wireless-N 1030 and Intel Centrino Advanced-N 6230 PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 802.11a/b/g/n (varies by adapter) and Bluetooth 3.0 + HS 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) Intel Centrino Wireless-N 1030: 802.11b/g/n Intel Centrino Advanced-N 6230: 802.11a/g/n 5 GHz (802.11a/n) Frequency Modulation Frequency band 5.15 GHz - 5.85 GHz (dependent on country) Modulation Wireless Medium Channels IEEE 802.11n Data Rates BPSK, QPSK, 16 QAM, 64 QAM 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. Intel Centrino Advanced-N 6230:

2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Intel Centrino Wireless-N 1030:

Rx (Mbps): 300, 270, 243, 240, 180 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General Operating Systems Wi-Fi Alliance*

certification Rx/Tx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Bluetooth Version 3.0 + HS Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2P Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification WLAN Standard IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Security Product Safety UL, C-UL, CB (IEC 60590) Intel Centrino Advanced-N 6235 Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-

bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Form Factor Dimensions PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 802.11a/b/g/n and Bluetooth 4.0 Antenna Interface Connector Antenna Diversity Network Standards Connector Interface Voltage Operating Temperature Humidity Frequency Modulation Frequency band 5.15 GHz - 5.85 GHz (dependent on country) Modulation Wireless BPSK, QPSK, 16 QAM, 64 QAM 5 GHz UNII: Orthogonal Frequency Division 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Medium Channels IEEE 802.11n Data Rates IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General Operating Systems Wi-Fi Alliance*

certification Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps Multiplexing (OFDM) 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Bluetooth Version 4.0 (3.0 +HS ) Windows* 7 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2P Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification WLAN Standard IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Security Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-

bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Product Safety UL, C-UL, CB (IEC 60590) Intel Centrino Advanced-N + WiMAX 6250 and Intel Centrino Wireless-N + WiMAX 6150 Form Factor Dimensions Antenna Interface Connector Antenna Diversity Connector Interface Voltage Operating Temperature Humidity WiFi Frequency Modulation PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Wireless-N + WiMAX 6150 2.4 GHz (802.11b/g/n), 5 GHz (802.11a/n) Frequency band 5.15 GHz - 5.85 GHz (dependent on country) 2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) Modulation Wireless Medium Channels IEEE 802.11n Data Rates BPSK, QPSK, 16 QAM, 64 QAM 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. Intel Centrino Wireless-N + WiMAX 6150 CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) MIMO Configuration: 1X2 Rx: 300, 270, 243, 240, 180 Mbps Rx/Tx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps Intel Centrino Advanced-N + WiMAX 6250 MIMO Configuration: 2X2 Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Cisco Compatible Extensions, v4.0 Intel Centrino Wireless-N + WiMAX 6150:

IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d Intel Centrino Advanced-N + WiMAX 6250:

802.11a, IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-

bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA UL, C-UL, CB (IEC 60590) Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) 802.16e-2005 Corrigenda 2 (D4) Intel Centrino Wireless-N + WiMAX 6150:

Mobile WiMAX release 1, Wave II. Supports 3A and 1A/B profiles IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates General Operating Systems Wi-Fi Alliance*

certification Cisco Compatible Extensions certification IEEE Feature Sets Architecture Security Product Safety WiMAX General Operating Systems Standard Compliance WiMAX System Profile Feature set Intel Centrino Advanced-N + WiMAX 6250:

Mobile WiMAX release 1, Wave II. Supports 3A, 5A/C, 1A/B, and 5BL profiles Key Management Protocol (PKMv2) 128-bit CCMP (Counter-Mode/CBC-MAC) based on AES encryption Security Encryption WiMAX Frequency band Intel Centrino Wireless-N + WiMAX 6150: 2.3-2.4 GHz / 2.496-2.690 GHz Modulation Wireless Medium WiMAX Network Release Feature set Rate Performance RF Transmitter Output Power Intel Centrino Advanced-N + WiMAX 6250: 2.3-2.4 GHz / 2.496-2.690 GHz / 3.4-3.8 GHz UL - QPSK, 16 QAM Scalable OFDMA (SOFDMA): 512 and 1024 FFT Intel Centrino Wireless-N + WiMAX 6150:

Channel bandwidths: 5 and 10 MHz Intel Centrino Advanced-N + WiMAX 6250:

Channel bandwidths: 5, 7, 8.75 and 10 MHz DL - QPSK, 16 QAM, 64 QAM Duplex mode: TDD operations sub-carrier permutation: PUSC SPWG/NWG Release 1.5 Intel Centrino Wireless-N + WiMAX 6150:

Up to 10 Mbps DL and 4 Mbps UL @ peak rate

(OTA performance, 10MHz channel) Intel Centrino Advanced-N + WiMAX 6250:

Up to 20 Mbps DL and 6 Mbps UL @ peak rate

(OTA performance, 10MHz channel) Compliance with Power class 2 Intel Centrino Advanced-N 6200, Intel Centrino Advanced-N 6205 and Intel Centrino Ultimate-N 6300 Form Factor Intel Centrino Advanced-N 6200, Intel Centrino Ultimate-N 6300:

PCI Express* Full-Mini Card and Half-Mini Card. Dimensions Intel Centrino Advanced-N 6205: PCI Express* Half-Mini Card. Full-Mini Card: Width 2.00 in x Length 1.18 in x Height 0.18 in (50.95 mm x 30 mm x 4.5 mm) Antenna Interface Connector Antenna Diversity Connector Interface Voltage Operating Temperature Humidity Frequency Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) Modulation Frequency band 5.15 GHz - 5.85 GHz (dependent on country) Modulation Wireless Medium Channels IEEE 802.11n Data Rates BPSK, QPSK, 16 QAM, 64 QAM 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. Intel Centrino Ultimate-N 6300:

2.400 - 2.4835 GHz (dependent on country) CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Tx/Rx: 450, 405, 360, 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps Intel Centrino Advanced-N 6200, Intel Centrino Advanced-N 6205:

IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates General Operating Systems Wi-Fi Alliance*

certification Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification WLAN Standard IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Security Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-

bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA UL, C-UL, CB (IEC 60590) Product Safety Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Regulatory Information NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 and similar standards), the information provided herein is subject to change. Intel Corporation assumes no responsibility for errors or omissions in this document. Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 Intel WiFi/WiMAX Wireless Adapters Information in this section supports the following wireless adapters:

Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N + WiMAX 6250 See Specifications for complete wireless adapter specifications. NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above. The following information is provided:

Information for the User Regulatory Information Information for the User Safety Notices USAFCC and FAA The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency

(RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:

Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. Use in specific environments:

The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. Antenna Use In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20cm (8 inches) or more from the body of all persons or at a minimum distance as specified by the FCC module grant conditions. FCC grants can be viewed from the FCC Equipment Authorization website at https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm by entering the FCC ID printed on the module label. Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use. Antenna Warnings Warning: To comply with the FCC and ANSI C95.1 RF exposure limits, it is recommended that for the wireless adapter installed in a desktop or portable computer, the antenna for this wireless adapter to be installed so as to provide a separation distance of at least 20 cm (8 inches) from all persons or at the minimum distance as specified by the module grant conditions. FCC grants can be viewed from the FCC Equipment Authorization website at https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm by entering the FCC ID printed on the module label. Warning: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices

(wireless adapters) because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network. Local Restrictions on 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e Radio Usage Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The device transmit power control

(TPC) interface is part of the Intel PROSet/Wireless WiFi Connection Utility Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. For country-specific information, see the additional compliance information supplied with the product. Wireless Interoperability The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:

IEEE Std. 802.11b compliant Standard on Wireless LAN IEEE Std. 802.11g compliant Standard on Wireless LAN IEEE Std. 802.11a compliant Standard on Wireless LAN IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN IEEE 802.16e-2005 Wave 2 compliant Wireless Fidelity certification, as defined by the Wi-Fi Alliance WiMAX certification as defined by the WiMAX Forum The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

Using the wireless adapter on board airplanes, or Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. WEEE Regulatory Information Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. This device is intended for OEM integrators only. Please see the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved access point. Any changes or modifications to this product not expressly approved by Intel could void the user's authorization to operate the product. Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label. The Intel wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines. Local Restriction of 802.11a, 802.11b, 802.11g, and 802.11n Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. FCC Radio Frequency Interference Requirements This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this wireless adapter to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. This wireless adapter is intended for OEM integrators only. This wireless adapter cannot be co-located with any other transmitter unless approved by the FCC. USAFederal Communications Commission (FCC) This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. NOTE: The radiated output power of the adapter is far below the FCC radio frequency exposure limits. Nevertheless, the adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20cm between you (or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device. Interference Statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Safety Approval Considerations This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:

It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd edition including the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure). The device shall be supplied by a SELV source when installed in the end-use equipment. A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 60950-

1 2nd edition. Low Halogen Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB /

substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment. Taiwan Radio Approvals To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document. Regulatory Markings A list of required regulatory markings can be found on the web at http://www.intel.com/support/wireless/wlan/

To find the regulatory information for your adapter, click on the link for your adapter. Then click Additional Information > Regulatory Documents. Intel WiFi Adapters, 802.11n Compliant The information in this section applies to the following products:

Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Ultimate-N 6300 See Specifications for wireless adapter specifications. NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above. The following information is provided:

Information for the User Regulatory Information Information for the User Safety Notices USAFCC and FAA The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency

(RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:

Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. Use in specific environments:

The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. Antenna Use In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20cm (8 inches) or more from the body of all persons or at a minimum distance as specified by the FCC module grant conditions. FCC grants can be viewed from the FCC Equipment Authorization website at https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm by entering the FCC ID printed on the module label. Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use. Antenna Warnings Warning: To comply with the FCC and ANSI C95.1 RF exposure limits, it is recommended that for the wireless adapter installed in a desktop or portable computer, the antenna for this wireless adapter to be installed so as to provide a separation distance of at least 20 cm (8 inches) from all persons or at the minimum distance as specified by the module grant conditions. FCC grants can be viewed from the FCC Equipment Authorization website at https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm by entering the FCC ID printed on the module label. Warning: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices

(wireless adapters) because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network. Local Restrictions on 802.11a, 802.11b, 802.11g and 802.11n Radio Usage Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The device transmit power control (TPC) interface is part of the Intel PROSet/Wireless WiFi Connection Utility Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. For country-specific information, see the additional compliance information supplied with the product. Wireless Interoperability The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:

IEEE Std. 802.11b compliant Standard on Wireless LAN IEEE Std. 802.11g compliant Standard on Wireless LAN IEEE Std. 802.11a compliant Standard on Wireless LAN IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN Wireless Fidelity certification, as defined by the Wi-Fi Alliance The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

Using the wireless adapter on board airplanes, or Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. WEEE Regulatory Information Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. This device is intended for OEM integrators only. Please see the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved access point. Any changes or modifications to this product not expressly approved by Intel could void the user's authorization to operate the product. Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label. The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. For country-specific approvals, see Radio Approvals. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines. Local Restriction of 802.11a, 802.11b, 802.11g, and 802.11n Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from permissible settings and restrictions in the country of use could be an infringement of national law and may be punished as such. FCC Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz and 5.470 to 5.725 GHz frequency ranges. FCC requires this product to be used indoors for the frequency ranges 5.15 to 5.25 GHz and 5.470 to 5.725 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. No configuration controls are provided for this wireless adapter allowing any change in the frequency of operations outside the FCC grant of authorization for U.S operation according to Part 15.407 of the FCC rules. This device is intended for OEM integrators only. This device cannot be co-located with any other transmitter unless approved by the FCC. USAFederal Communications Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. NOTE: The radiated output power of the adapter is far below the FCC radio frequency exposure limits. Nevertheless, the adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20cm between you (or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device. Interference Statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Safety Approval Considerations This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:

It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd edition including the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure). The device shall be supplied by a SELV source when installed in the end-use equipment. A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 60950-

1 2nd edition. Low Halogen Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB /

substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment. Canada Industry Canada (IC) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil se conforme Canada d'Industrie normes de RSS permis-exempt. L'opration est assujetti au suivre deux conditions : (1) cet appareil ne peut pas causer l'intervention, et (2) cet appareil doit accepter de l'intervention, y compris l'intervention qui peut causer l'opration non dsire de l'appareil. Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-

GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. To comply with RF exposure requirements all antennas should be located at a minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body of all persons. Attention: lutilisation dun rseau sans fil IEEE802.11a est rstreinte une utilisation en intrieur cause du fonctionement dans la bande de frquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit utilis lintrieur des btiments pour la bande de frquence 5.15-5.25 GHz afin de rduire les possibilits dinterfrences nuisibles aux canaux co-existants des systmes de transmission satellites. Les radars de puissances ont fait lobjet dune allocation primaire de frquences dans les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent crer des interfrences avec ce produit et/ou lui tre nuisible. Le gain dantenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin dtre conforme aux limites de puissance isotropique rayonne quivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionement point--point. Se pour conformer aux conditions d'exposition de RF toutes les antennes devraient tre localises une distance minimum de 20 cm, ou la distance de sparation minimum permise par l'approbation de module, du corps de toutes les personnes. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil se conforme Canada d'Industrie normes de RSS permis-exempt. L'opration est assujetti au suivre deux conditions : (1) cet appareil ne peut pas causer l'intervention, et (2) cet appareil doit accepter de l'intervention, y compris l'intervention qui peut causer l'opration non dsire de l'appareil. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication. Sous les rglements de Canada d'Industrie, cet metteur de radio peut fonctionner utilisant seulement une antenne d'un type et un maximum (ou moindre) le gain a approuv pour l'metteur par Canada d'Industrie. Pour rduire l'intervention potentielle de radio aux autres utilisateurs, le type d'antenne et son gain devrait tre si choisie que l'quivalent a rayonn d'isotropiement le pouvoir (e.i.r.p.) n'est pas plus que ce ncessaire pour la communication russie. European Union The low band 5.15 -5.35 GHz is for indoor use only. This equipment complies with the essential requirements of the European Union directive 1999/5/EC. See Statements of European Union Compliance. European Union Declarations of Conformity The European Union Declaration of Conformity for each adapter is available at:

http://www.intel.com/support/wireless/wlan/. To find the Declaration of Conformity for your adapter, click on the link for your adapter. Then click Additional Information > Regulatory Documents. Japan Indoor use only in the 5Ghz band. Korea Morocco The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant and Taza. The operation of this product in the radio channels 4, 5, 6 et 7 (2425 - 2442 MHz) is not authorized in the following cities: Aroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Bni Hafida, Cabo Negro, Casablanca, Fs, Lakbab, Marrakech, Merchich, Mohammdia, Rabat, Sal, Tanger, Tan Tan, Taounate, Tit Mellil, Zag. Taiwan Radio Approvals To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document. Regulatory Markings A list of required regulatory markings can be found on the web at http://www.intel.com/support/wireless/wlan/

To find the regulatory information for your adapter, click on the link for your adapter. Then click Additional Information > Regulatory Documents. Statement of European Compliance Each of the adapters listed below comply with the essential requirements of the European Union directive 1999/5/EC. Intel Centrino Wireless-N 100 (Only available on Windows* 7 installations) Intel Centrino Wireless-N 105 (Only available on Windows* 7 installations) Intel Centrino Wireless-N 130 (Only available on Windows* 7 installations) Intel Centrino Wireless-N 135 (Only available on Windows* 7 installations) Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 (Only available on Windows* 7 installations) Intel Centrino Wireless-N 2230 (Not available on Windows* Vista* installations) Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Important Information Safety Information Third Party Software Notices Safety Information It is important that you read the safety information regarding your WiFi adapter. Please see the User's Guide for safety and regulatory notices. Third Party Software Notices Portions of Intel PROSet/Wireless WiFi Connection Utility include software under the following terms:

OpenSSL License Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-

core@openssl.org. 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscape's SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"

The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related. 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson

(tjh@cryptsoft.com)"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS:' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution license [including the GNU Public License.]

zlib.h -- interface of the 'zlib' general purpose compression library, version 1.2.3, July 18th, 2005 Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly jloup@gzip.org Mark Adler madler@alumni.caltech.edu Adapter Driver Portions of the driver include software under the following terms:

WPA Supplicant Copyright (c) 2003-2007, Jouni Malinen <jkmaline@cc.hut.fi> and contributors. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of Jouni Malinen nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. __________ Copyright (c) 2001, Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK. All rights reserved. LICENSE TERMS The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided that:

1. Distributions of this source code include the above copyright notice, this list of conditions and the following disclaimer;

2. distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other associated materials;

3. the copyright holder's name is not used to endorse products built using this software without specific written permission. DISCLAIMER This software is provided 'as is' with no explicit or implied warranties in respect of its properties, including, but not limited to, correctness and fitness for purpose. Issue Date: 29/07/2002 This file contains the definitions required to use AES (Rijndael) in C. Portions Licensed from Devicescape Software, Inc. Intel PROSet/Wireless WiFi Connection Utility contains software licensed from Devicescape Software, Inc. Copyright (c) 2004 - 2008 Devicescape Software, Inc. All rights reserved.

"Odd Button" Artistic License Portions of this software contain the standard version of "Odd Button" licensed under the Artistic License. The source code for "Odd Button" may be found online at http://sourceforge.net/projects/oddbutton. September 15, 2011 Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Customer Support Intel support is available online or by telephone. Available services include the most up-to-date product information, installation instructions about specific products, and troubleshooting tips. Online Support Technical Support: http://www.intel.com/support Network Product Support: http://www.intel.com/network Corporate Web Site: http://www.intel.com Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Warranty Product Warranty Information One-Year Limited Hardware Warranty Limited Warranty In this warranty statement, the term "Product" applies to the wireless adapters listed in Specifications. Intel warrants to the purchaser of the Product that the Product, if properly used and installed, will be free from defects in material and workmanship and will substantially conform to Intels publicly available specifications for the Product for a period of one (1) year beginning on the date the Product was purchased in its original sealed packaging. SOFTWARE OF ANY KIND DELIVERED WITH OR AS PART OF THE PRODUCT IS EXPRESSLY PROVIDED "AS IS", SPECIFICALLY EXCLUDING ALL OTHER WARRANTIES, EXPRESS, IMPLIED (INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE), provided however, that Intel warrants that the media on which the software is furnished will be free from defects for a period of ninety (90) days from the date of delivery. If such a defect appears within the warranty period, you may return the defective media to Intel for replacement or alternative delivery of the software at Intel's discretion and without charge. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the software. If the Product which is the subject of this Limited Warranty fails during the warranty period for reasons covered by this Limited Warranty, Intel, at its option, will:

REPAIR the Product by means of hardware and/or software; OR REPLACE the Product with another product, OR, if Intel is unable to repair or replace the Product, REFUND the then-current Intel price for the Product at the time a claim for warranty service is made to Intel under this Limited Warranty. THIS LIMITED WARRANTY, AND ANY IMPLIED WARRANTIES THAT MAY EXIST UNDER APPLICABLE STATE, NATIONAL, PROVINCIAL OR LOCAL LAW, APPLY ONLY TO YOU AS THE ORIGINAL PURCHASER OF THE PRODUCT. Extent of Limited Warranty Intel does not warrant that the Product, whether purchased stand-alone or integrated with other products, including without limitation, semi-conductor components, will be free from design defects or errors known as

"errata." Current characterized errata are available upon request. Further, this Limited Warranty does NOT cover:

(i) any costs associated with the replacement or repair of the Product, including labor, installation or other costs incurred by you, and in particular, any costs relating to the removal or replacement of any Product soldered or otherwise permanently affixed to any printed circuit board or integrated with other products; (ii) damage to the Product due to external causes, including accident, problems with electrical power, abnormal, mechanical or environmental conditions, usage not in accordance with product instructions, misuse, neglect, accident, abuse, alteration, repair, improper or unauthorized installation or improper testing, or (iii) any Product which has been modified or operated outside of Intels publicly available specifications or where the original product identification markings (trademark or serial number) have been removed, altered or obliterated from the Product; or (iv) issues resulting from modification (other than by Intel) of software products provided or included in the Product, (v) incorporation of software products, other than those software products provided or included in the Product by Intel, or (vi) failure to apply Intel-supplied modifications or corrections to any software provided with or included in the Product. How to Obtain Warranty Service To obtain warranty service for the Product, you may contact your original place of purchase in accordance with its instructions or you may contact Intel. To request warranty service from Intel, you must contact the Intel Customer Support ("ICS") center in your region (http://www.intel.com/support/wireless/) within the warranty period during normal business hours (local time), excluding holidays and return the Product to the designated ICS center. Please be prepared to provide: (1) your name, mailing address, email address, telephone numbers and, in the USA, valid credit card information; (2) proof of purchase; (3) model name and product identification number found on the Product; and (4) an explanation of the problem. The Customer Service Representative may need additional information from you depending on the nature of the problem. Upon ICS's verification that the Product is eligible for warranty service, you will be issued a Return Material Authorization ("RMA") number and provided with instructions for returning the Product to the designated ICS center. When you return the Product to the ICS center, you must include the RMA number on the outside of the package. Intel will not accept any returned Product without an RMA number, or that has an invalid RMA number, on the package. You must deliver the returned Product to the designated ICS center in the original or equivalent packaging, with shipping charges pre-

paid (within the USA), and assume the risk of damage or loss during shipment. Intel may elect to repair or replace the Product with either a new or reconditioned Product or components, as Intel deems appropriate. The repaired or replaced product will be shipped to you at the expense of Intel within a reasonable period of time after receipt of the returned Product by ICS. The returned Product shall become Intels property on receipt by ICS. The replacement product is warranted under this written warranty and is subject to the same limitations of liability and exclusions for ninety (90) days or the remainder of the original warranty period, whichever is longer. If Intel replaces the Product, the Limited Warranty period for the replacement Product is not extended. WARRANTY LIMITATIONS AND EXCLUSIONS THIS WARRANTY REPLACES ALL OTHER WARRANTIES FOR THE PRODUCT AND INTEL DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, COURSE OF DEALING AND USAGE OF TRADE. Some states (or jurisdictions) do not allow the exclusion of implied warranties so this limitation may not apply to you. ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD. Some states (or jurisdictions) do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. LIMITATIONS OF LIABILITY INTELS RESPONSIBILITY UNDER THIS OR ANY OTHER WARRANTY, IMPLIED OR EXPRESS, IS LIMITED TO REPAIR, REPLACEMENT OR REFUND, AS SET FORTH ABOVE. THESE REMEDIES ARE THE SOLE AND EXCLUSIVE REMEDIES FOR ANY BREACH OF WARRANTY. TO THE MAXIMUM EXTENT PERMITTED BY LAW, INTEL IS NOT RESPONSIBLE FOR ANY DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY (INCLUDING WITHOUT LIMITATION, LOST PROFITS, DOWNTIME, LOSS OF GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH A SYSTEM CONTAINING THE PRODUCT), EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states (or jurisdictions) do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE OR JURISDICTION. ANY AND ALL DISPUTES ARISING UNDER OR RELATED TO THIS LIMITED WARRANTY SHALL BE ADJUDICATED IN THE FOLLOWING FORUMS AND GOVERNED BY THE FOLLOWING LAWS: FOR THE UNITED STATES OF AMERICA, CANADA, NORTH AMERICA AND SOUTH AMERICA, THE FORUM SHALL BE SANTA CLARA, CALIFORNIA, USA AND THE APPLICABLE LAW SHALL BE THAT OF THE STATE OF DELAWARE. FOR THE ASIA PACIFIC REGION (EXCEPT FOR MAINLAND CHINA), THE FORUM SHALL BE SINGAPORE AND THE APPLICABLE LAW SHALL BE THAT OF SINGAPORE. FOR EUROPE AND THE REST OF THE WORLD, THE FORUM SHALL BE LONDON AND THE APPLICABLE LAW SHALL BE THAT OF ENGLAND AND WALES IN THE EVENT OF ANY CONFLICT BETWEEN THE ENGLISH LANGUAGE VERSION AND ANY OTHER TRANSLATED VERSION(S)OF THIS LIMITED WARRANTY

(WITH THE EXCEPTION OF THE SIMPLIFIED CHINESE VERSION), THE ENGLISH LANGUAGE VERSION SHALL CONTROL. IMPORTANT! UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS SOLD HEREUNDER ARE NOT DESIGNED, OR INTENDED FOR USE IN ANY MEDICAL, LIFE SAVING OR LIFE SUSTAINING SYSTEMS, TRANSPORTATION SYSTEMS, NUCLEAR SYSTEMS, OR FOR ANY OTHER MISSION CRITICAL APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. WEEE Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Glossary of Terms Term 802.11 802.11a 802.11b 802.11g 802.11n 802.1X AAA Server Access Point

(AP) Ad Hoc Network AES-CCMP Definition The 802.11 standard refers to a family of specifications developed by the IEEE for wireless LAN technology. The 802.11 specifies an over-the-air interface between a wireless client and a base station or between two wireless clients and provides 1 or 2 Mbps transmission in the 2.4 GHz band using either frequency hopping spread spectrum (FHSS) or direct sequence spread spectrum (DSSS). The 802.11a standard specifies a maximum data transfer rate of 54 Mbps and an operating frequency of 5 GHz. The 802.11a standard uses the Orthogonal Frequency Division Multiplexing

(OFDM) transmission method. Additionally, the 802.11a standard supports 802.11 features such as WEP encryption for security. 802.11b is an extension to 802.11 that applies to wireless networks and provides 11 Mbps transmission (with a fallback to 5.5, 2 and 1 Mbps) in the 2.4 GHz band. 802.11b uses only DSSS. Throughput data rate 5+ Mbps in the 2.4 GHz band. The 802.11g standard specifies a maximum data transfer rate of 54 Mbps, an operating frequency of 2.4GHz, and WEP encryption for security. 802.11g networks are also referred to as Wi-Fi* networks. A task group of the IEEE 802.11 committee has defined a new draft specification that provides for increased throughput speeds of up to 540 Mbps. The specification provides for Multiple-

Input-Multiple-Output (MIMO) technology, or using multiple receivers and multiple transmitters in both the client and access point, to achieve improved performance. 802.1X is the IEEE Standard for Port-Based Network Access Control. This is used in conjunction with EAP methods to provide access control to wired and wireless networks. Authentication, Authorization and Accounting Server. A system to control access to computer resources and track user activity. A device that connects wireless devices to another network. For example, a wireless LAN, Internet modem or others. A communication configuration in which every computer has the same capabilities, and any computer can initiate a communication session. Also known as a peer-to-peer network, a device to device network or a computer-to-computer network. Advanced Encryption Standard - Counter CBC-MAC Protocol is the new method for privacy protection of wireless transmissions specified in the IEEE 802.11i standard. AES-CCMP provides a stronger encryption method than TKIP. The AES algorithm is capable of using cryptographic keys of 128, 192, and 256 bits to encrypt and decrypt data in 128-bit blocks. AES-CCMP uses the AES block cipher, but restricts the key length to 128 bits. AES-CCMP incorporates two sophisticated cryptographic techniques (counter mode and CBC-MAC) to provide improved security between the mobile client and the access point. BER Available network Authentication Verifies the identity of a user logging onto a network. Passwords, digital certificates, smart cards and biometrics are used to prove the identity of the client to the network. Passwords and digital certificates are also used to identify the network to the client. One of the networks listed under Available networks on the Wireless Networks tab of the Wireless Network Connection Properties (Windows* XP environment). Any wireless network that is broadcasting and is within receiving range of the WiFi adapter appears on the list. Bit Error Rate. The ratio of errors to the total number of bits being sent in a data transmission from one location to another. The total number of bits (ones and zeros) per second that a network connection can support. Note that this bit rate will vary, under software control, with different signal path conditions. Broadcast SSID Used to allow an access point to respond to clients on a wireless network by sending probes. BSSID A unique identifier for each wireless client on a wireless network. The Basic Service Set Identifier (BSSID) is the Ethernet MAC address of each adapter on the network. Bit Rate CA (Certificate Authority) CCX (Cisco Compatible eXtension) Certificate CKIP A corporate certification authority implemented on a server. In addition, Internet Explorer's certificate can import a certificate from a file. A trusted CA certificate is stored in the root store. Cisco Compatible Extensions Program ensures that devices used on Cisco wireless LAN infrastructure meet the security, management and roaming requirements. Used for client authentication. A certificate is registered on the authentication server (for example, RADIUS server) and used by the authenticator. Cisco Key Integrity Protocol (CKIP) is a Cisco proprietary security protocol for encryption in 802.11 media. CKIP uses a key message integrity check and message sequence number to improve 802.11 security in infrastructure mode. CKIP is Cisco's version of TKIP. Client computer The computer that gets its Internet connection by sharing either the host computer's connection DSSS EAP EAP-AKA EAP-FAST EAP-GTC EAP-OTP EAP-SIM or the access point's connection. Direct Sequence Spread Spectrum. Technology used in radio transmission. Incompatible with FHSS. Short for Extensible Authentication Protocol, EAP sits inside of Point-to-Point Protocol's (PPP) authentication protocol and provides a generalized framework for several different authentication methods. EAP is supposed to head off proprietary authentication systems and let everything from passwords to challenge-response tokens and public-key infrastructure certificates all work smoothly. EAP-AKA (Extensible Authentication Protocol Method for UMTS Authentication and Key Agreement) is an EAP mechanism for authentication and session key distribution, using the Universal Mobile Telecommunications System (UMTS) Subscriber Identity Module (USIM). The USIM card is a special smart card used with cellular networks to validate a given user with the network. EAP-FAST, like EAP-TTLS and PEAP, uses tunneling to protect traffic. The main difference is that EAP-FAST does not use certificates to authenticate. Provisioning in EAP-FAST is negotiated solely by the client as the first communication exchange when EAP-FAST is requested from the server. If the client does not have a pre-shared secret Protected Access Credential (PAC), it can request to initiate a provisioning EAP-FAST exchange to dynamically obtain one from the server. EAP-FAST documents two methods to deliver the PAC: manual delivery through an out-of-band secure mechanism, and automatic provisioning. Manual delivery mechanisms can be any delivery mechanism that the administrator of the network feels is sufficiently secure for their network. Automatic provisioning establishes an encrypted tunnel to protect the authentication of the client and the delivery of the PAC to the client. This mechanism, while not as secure as a manual method may be, is more secure than the authentication method used in LEAP. The EAP-FAST method can be divided into two parts: provisioning, and authentication. The provisioning phase involves the initial delivery of the PAC to the client. This phase only needs to be performed once per client and user. The EAP-GTC (Generic Token Card) is similar to the EAP-OTP except with hardware token cards. The request contains a displayable message, and the response contains the string read from the hardware token card. EAP-OTP (One-Time Password) is similar to MD5, except it uses the OTP as the response. The request contains a displayable message. The OTP method is defined in RFC 2289. Extensible Authentication Protocol-Subscriber Identity Module (EAP-SIM) authentication can be used with:

Network Authentication types: Open, Shared, and WPA*-Enterprise, WPA2*-Enterprise. Data Encryption types: None, WEP and CKIP. EAP-TLS EAP-TTLS Encryption FHSS A SIM card is a special smart card that is used by Global System for Mobile Communications

(GSM) based digital cellular networks. The SIM card is used to validate your credentials with the network A type of authentication method that uses EAP and a security protocol called the Transport Layer Security (TLS). EAP-TLS uses certificates that use passwords. EAP-TLS authentication supports dynamic WEP key management. A type of authentication method that uses EAP and Tunneled Transport Layer Security (TTLS). EAP-TTLS uses a combination of certificates and another security method such as passwords. Scrambling data so that only the authorized recipient can read it. Usually a key is needed to interpret the data. Frequency-Hop Spread Spectrum. Technology used in radio transmission. Incompatible with DSSS. A capability that allows a number of people to view, modify, and print the same file(s) from different computers. The threshold at which the wireless adapter breaks the packet into multiple frames. This determines the packet size and affects the throughput of the transmission. A unit of frequency equal to 1,000,000,000 cycles per second. File and printer sharing Fragmentation threshold GHz

(Gigahertz) Host computer The computer that is directly connected to the Internet via a modem or network adapter. Infrastructure network A wireless network centered around an access point. In this environment, the access point not only provides communication with the wired network, but also mediates wireless network traffic in the immediate neighborhood. Institute of Electrical and Electronics Engineers (IEEE) is an organization involved in defining computing and communications standards. The address of a computer that is attached to a network. Part of the address designates which network the computer is on, and the other part represents the host identification. IEEE A high-speed, low-error data network covering a relatively small geographic area. A version of Extensible Authentication Protocol (EAP). LEAP is a proprietary extensible authentication protocol developed by Cisco that provides a challenge-response authentication mechanism and dynamic key assignment. A hardwired address applied at the factory. It uniquely identifies network hardware, such as a wireless adapter, on a LAN or WAN. Internet Protocol (IP) address LAN (Local Area Network) LEAP (Light Extensible Authentication Protocol) MAC (Media Access Control) Address Mbps

(Megabits-per-

second) MHz

(Megahertz) MIC (Michael) Message Integrity Check (commonly called Michael). MS-CHAP Transmission speed of 1,000,000 bits per second. A unit of frequency equal to 1,000,000 cycles per second. An EAP mechanism used by the client. Microsoft Challenge Authentication Protocol (MS-CHAP) Version 2, is used over an encrypted channel to enable server validation. The challenge and response packets are sent over a non-exposed TLS encrypted channel. ns(Nanosecond) 1 billionth (1/1,000,000,000) of a second. OFDM Open authentication PEAP Orthogonal Frequency Division Multiplexing. Allows any device network access. If encryption is not enabled on the network, any device that knows the Service Set Identifier (SSID) of the access point can gain access to the network. Protected Extensible Authentication Protocol (PEAP) is an Internet Engineering Task Force (IETF) draft protocol sponsored by Microsoft, Cisco, and RSA Security. PEAP creates an encrypted tunnel similar to the tunnel used in secure web pages (SSL). Inside the encrypted tunnel, a number of other EAP authentication methods can be used to perform client authentication. PEAP requires a TLS certificate on the RADIUS server, but unlike EAP-TLS there is no requirement to have a certificate on the client. PEAP has not been ratified by the IETF. The IETF is currently comparing PEAP and TTLS (Tunneled TLS) to determine an authentication standard for 802.1X authentication in 802.11 wireless systems. PEAP is an authentication type designed to take advantage of server-side EAP-Transport Layer Security (EAP-TLS) and to support various authentication methods, including user passwords and one-time passwords, and Generic Token Cards. A wireless network structure that allows wireless clients to communicate directly with each other without using an access point. The state in which the radio is periodically powered down to conserve power. When the portable computer is in Power Save mode, received packets are stored in the access point until the wireless adapter wakes up. One of the networks that has been configured. Such networks are listed under Preferred networks on the Wireless Networks tab of the Wireless Network Connection Properties

(Windows* XP environment). RADIUS is an authentication and accounting system that verifies user's credentials and grants access to requested resources. The international unit for measuring frequency is Hertz (Hz), which is equivalent to the older unit of cycles per second. One MegaHertz (MHz) is one million Hertz. One GigaHertz (GHz) is one billion Hertz. For reference: the standard US electrical power frequency is 60 Hz, the AM broadcast radio frequency band is 0.55 -1.6 MHz, the FM broadcast radio frequency band is 88-

108 MHz, and microwave ovens typically operate at 2.45 GHz. Movement of a wireless node between two micro cells. Roaming usually occurs in infrastructure networks built around multiple access points. Current wireless network roaming is only supported in the same subnet of a network. The number of frames in the data packet at or above which an RTS/CTS (request to send/clear to send) handshake is turned on before the packet is sent. The default value is 2347. An encryption key known only to the receiver and sender of data. This is also referred to as a pre-shared key. A SIM card is used to validate credentials with the network. A SIM card is a special smart card used by GSM-based digital cellular networks. Silent Mode Access Points or Wireless Routers have been configured to not broadcast the SSID for the wireless network. This makes it necessary to know the SSID in order to configure the wireless profile to connect to the access point or wireless router. Peer-to-Peer mode Power save mode Preferred network RADIUS

(Remote Authentication Dial-In User Service) RF (Radio Frequency) Roaming RTS threshold Shared key SIM

(Subscriber Identity Module) Silent mode Single Sign On Single Sign On feature set allows the 802.1X credentials to match your Windows log on user SSID (Service Set Identifier) stealth TKIP (Temporal Key Integrity name and password credentials for wireless network connections. SSID or network name is a value that controls access to a wireless network. The SSID for your wireless network card must match the SSID for any access point that you want to connect with. If the value does not match, you are not granted access to the network. Each SSID may be up to 32 alphanumeric characters long and is case-sensitive. A stealth access point is one that has the capability and is configured to not broadcast its SSID. This is the WiFi network name that appears when a DMU (Device Management Utility, such as Intel PROSet/Wireless WiFi Connection Utility) scans for available wireless networks. Although this can enhance wireless network security, it is commonly considered a weak security feature. To connect to a stealth access point, a user must specifically know the SSID and configure their DMU accordingly. The feature is not a part of the 802.11 specification, and is known by differing names by various vendors: closed mode, private network, SSID broadcasting. Temporal Key Integrity protocol improves data encryption. Wi-Fi Protected Access* uses its TKIP. TKIP provides important data encryption enhancements including a re-keying method. Protocol) TLS (Transport Layer Security) TTLS (Tunneled Transport Layer Security) WEP (Wired Equivalent Privacy) WEP Key Wi-Fi*

(Wireless Fidelity) WiMAX TKIP is part of the IEEE 802.11i encryption standard for wireless networks. TKIP is the next generation of WEP, the Wired Equivalency Protocol, which is used to secure 802.11 wireless networks. TKIP provides per packet key mixing, a message integrity check and a re-keying mechanism, thus fixing the flaws of WEP. A type of authentication method using the Extensible Authentication Protocol (EAP) and a security protocol called the Transport Layer Security (TLS). EAP-TLS uses certificates which use passwords. EAP-TLS authentication supports dynamic WEP key management. The TLS protocol is intended to secure and authenticate communications across a public network through data encryption. The TLS Handshake Protocol allows the server and client to provide mutual authentication and to negotiate an encryption algorithm and cryptographic keys before data is transmitted. These settings define the protocol and the credentials used to authenticate a user. In TTLS, the client uses EAP-TLS to validate the server and create a TLS-encrypted channel between the client and server. The client can use another authentication protocol. Typically password-based protocols challenge over this encrypted channel to enable server validation. The challenge and response packets are sent over a non-exposed TLS encrypted channel. TTLS implementations today support all methods defined by EAP, as well as several older methods (CHAP, PAP, MS-

CHAP and MS-CHAP-V2). TTLS can easily be extended to work with new protocols by defining new attributes to support new protocols. Wired Equivalent Privacy, 64- and 128-bit (64-bit is sometimes referred to as 40-bit). This is a low-level encryption technique designed to give the user about the same amount of privacy that he would expect from a LAN. WEP is a security protocol for wireless local area networks

(WLANs) defined in the 802.11b standard. WEP is designed to provide the same level of security as that of a wired LAN. WEP aims to provide security by data over radio waves so that it is protected as it is transmitted from one end point to another. Either a pass phrase or hexadecimal key. The pass phrase must be 5 ASCII characters for 64-bit WEP or 13 ASCII characters for 128-bit WEP. For pass phrases, 0-9, a-z, A-Z, and ~!@#$%^&*()_+|`-={}|[]\:";'<>?,./ are all valid characters. The hex key must be 10 hexadecimal characters (0-9, A-F) for 64-bit WEP or 26 hexadecimal characters (0-9, A-F) for 128-bit WEP. Is meant to be used generically when referring of any type to 802.11 network, whether 802.11b, 802.11a, or dual-band. WiMAX, the Worldwide Interoperability for Microwave Access, is a telecommunications technology aimed at providing wireless data over long distances in a variety of ways, from point-

to-point links to full mobile cellular type access. It is based on the IEEE 802.16 standard. The name WiMAX was created by the WiMAX Forum, which was formed in June 2001 to promote conformance and interoperability of the standard. The forum describes WiMAX as "a standards-

based technology enabling the delivery of last mile wireless broadband access as an alternative to cable and DSL."

Wireless router A stand-alone wireless hub that allows any computer that has a wireless network adapter to communicate with another computer within the same network and to connect to the Internet. A type of local-area network that uses high-frequency radio waves rather than wires to communicate between nodes. This is a security enhancement that strongly increases the level of data protection and access control to a wireless network. WPA is an interim standard that will be replaced with the IEEE's 802.11i standard upon its completion. WPA consists of RC4 and TKIP and provides support for BSS (Infrastructure) mode only. WPA and WPA2 are compatible. This is the second generation of WPA that complies with the IEEE TGi specification. WPA2 consists of AES encryption, pre-authentication and PMKID caching. It provides support for BSS

(Infrastructure) mode and IBSS (ad hoc) mode. WPA and WPA2 are compatible. WPA2* (Wi-Fi Protected Access 2) WPA-Enterprise Wi-Fi Protected Access-Enterprise applies to corporate users. A new standards-based, interoperable security technology for wireless LAN (subset of IEEE 802.11i draft standard) that encrypts data sent over radio waves. WPA is a Wi-Fi standard that was designed to improve WLAN (Wireless Local-Area Network) WPA* (Wi-Fi Protected Access) upon the security features of WEP as follows:

Improved data encryption through the temporal key integrity protocol (TKIP). TKIP uses a hashing algorithm to scramble the encryption keys and adds an integrity-checking feature to ensure that the keys have not been tampered with. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer's hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA is an interim standard that will be replaced with the IEEE's 802.11i standard upon its completion. WPA-Personal Wi-Fi Protected Access-Personal provides a level of security in the small network or home WPA-PSK (Wi-

Fi Protected-

Access Pre-

Shared Key) environment. WPA-PSK mode does not use an authentication server. It can be used with the data encryption types WEP or TKIP. WPA-PSK requires configuration of a pre-shared key (PSK). You must enter a pass phrase or 64 hex characters for a pre-shared key of length 256-bits. The data encryption key is derived from the PSK. Back to Top Back to Contents Trademarks and Disclaimers

Lenovo(Japan), Ltd., Date: March 15, 2010 Document Number: UY610-03-0057-66 Users Manual The attachment is the users manual for the specific Lenovo host PC device in this application that consists of the following three sections. 1. The regulatory notice concerning the FCC Part 2 /15B /15C /15E /27 and IC RSS-102/210, ICES-003 for WLAN / WiMAX / Bluetooth transmitter devices. The applying transmitter device (FCC ID: PD9622ANXHU) will be announced and marketed in US only. 2. Reference only:

The regulatory notice concerning the FCC Part 2 /15B /22H /24E and IC RSS-102/132 /133, ICES-003 for a WWAN transmitter device incorporated in the host PC device. 3. Screen copies of electronic users guidance referred to in the above regulatory notices, which are displayed on the LCD screen of the host PC device. 1. Regulatory notice for WLAN / WiMAX / Bluetooth transmitter devices The applying transmitter device (FCC ID: PD9622ANXHU) will be announced and marketed in US only. ThinkPad Regulatory Notice About this manual This manual contains regulatory information for the following ThinkPad products. v ThinkPad X100e and ThinkPad Mini 10/Mini 11 Read first regulatory information Read this document before using your computer. This computer complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Install and use your computer according to the following instructions. If your computer contains a wireless WAN adapter, be sure to also read ThinkPad Regulatory Notice for the Wireless WAN Adapter, included with your computer. The latest Regulatory Notice has been uploaded on the Web site. To refer to it, go to http://www.lenovo.com/think/support, click Troubleshooting, and then click Users guides and manuals. Veuillez lire le prsent document avant dutiliser votre ordinateur. Cet ordinateur est conforme aux normes de frquence radio et de scurit de tous les pays ou rgions dans lesquels son utilisation sans fil a t homologue. Installez et utilisez lordinateur en respectant les instructions qui suivent. Si votre ordinateur contient une carte de rseau tendu (WAN) sans fil, veillez lire galement la consigne rglementaire ThinkPad Regulatory Notice for the Wireless WAN Adapter, fournie avec votre ordinateur. La version la plus rcente de la Notice relative la rglementation a t charge sur le site Web. Pour la consulter, accdez http://www.lenovo.com/

think/support, cliquez sur Troubleshooting, puis sur Users guides and manuals. Copyright Lenovo 2010 1 USA Federal Communications Commission (FCC) I. Approved wireless devices This section presents the FCC ID and model number of each wireless device. i) User installable wireless LAN/WiMAX adapter v FCC ID: TX2-RTL8191SE-L (Model: RTL8191SE) v FCC ID: PD9622ANXHU (Model: 622ANXHMW) Note: PCI Express Mini Cards for a wireless LAN marketed in the USA and Canada do not support or function in the extended channels (12ch, 13ch). v The PCI Express Mini Card (Model: 622ANXHMW) incorporates two functions: LAN and WiMAX. These functions operate exclusively, and do not transmit radio frequencies simultaneously. ii) Preinstalled integrated Bluetooth device v FCC ID: QDS-BRCM1046 (Model: BCM92070MD_LENO) II. User installable wireless LAN/WiMAX adapter i) Use of the wireless LAN/WiMAX adapter If no integrated PCI Express Mini Card has been preinstalled in your computer, you can install one, provided by Lenovo as an option. Plug the wireless option adapter into the PCI Express Mini Card slot. For the installation procedure, see Installing and replacing the PCI Express Mini Card for wireless LAN/WiMAX connection in Access Help. Attention: The computer contains an authentication mechanism. If you install an unauthorized PCI Express Mini Card that is not approved for use in your computer, the computer will not start, but only displays an error message and emits audible beeps. ii) FCC ID location There is no FCC ID for the PCI Express Mini Card shown on the enclosure of your computer. Instead you will find an indicator pointing to the location of the FCC ID on the bottom of your computer. The FCC ID is affixed on the approved adapter installed in the PCI Express Mini Card slot, and the FCC ID is visible prior to installation. For the location of the FCC ID indicator and the slot, see Location of the FCC ID and IC Certification number label in Access Help. iii) FCC RF Exposure compliance The radiated energy from the antenna(s) connected to the PCI Express Mini Card conforms to the FCC limit of the SAR (Specific Absorption Rate) requirement regarding 47 CFR Part 2 section 1093, when the computer was tested in the conventional orientation. 2 The transmission antennas for the PCI Express Mini Card are located in the LCD cover. See Location of the UltraConnect wireless antennas in Access Help. iv) Radio Frequency interference requirements The wireless LAN transmitter device has been tested and found to comply with the limits for a Class B digital device pursuant to FCC Part 15 Subpart B. Refer to Electronic emission notices on page 9. When you use a wireless LAN/WiMAX adapter in the 802.11 a/n transmission mode:

v Each device is restricted to indoor use due to its operation in the 5150 to 5250 MHz frequency range. FCC requires these products to be used indoors for the frequency range 5150 to 5250 MHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. v High power radars are allocated as primary users of the 5250 to 5350 MHz and 5650 to 5850 MHz bands. These radar stations can cause interference with and/or damage this device. III. Preinstalled integrated Bluetooth device i) Use of the Bluetooth device The Bluetooth device is preinstalled by Lenovo, and any other device is not approved for use in your computer. If the device requires replacement via the proper steps shown in Getting help and service of the Service and Troubleshooting Guide, shipped with your computer, Lenovo will send you a Customer Replaceable Unit (CRU). ii) FCC ID location If your computer uses a Bluetooth device, the FCC ID for the Bluetooth device is affixed on the label at the bottom of your computer. iii) FCC RF safety requirement The radiated output power of the Bluetooth device is far below the FCC radio frequency exposure limits. Therefore, a 20 cm of separation between the Bluetooth antenna and human body is not required. The Bluetooth device is located under the palm rest. See About your computer in Access Help. iv) Radio Frequency interference requirements The Bluetooth device has been tested and found to comply with the limits for both a Class B digital device regarding FCC Part 15 Subpart B and an intentional radiator regarding FCC Part 15 Subpart C; then it underwent the certification processes for both rules. Thus the FCC ID of the Bluetooth device includes both certifications of Part 15 Subpart B and C. ThinkPad Regulatory Notice 3 IV. Simultaneous use of RF transmitters Your computer is approved for simultaneous use of the approved wireless LAN/WiMAX adapter, the approved wireless WAN adapter, and the approved Bluetooth device. For a list of those transmitters, refer to I. Approved wireless devices on page 2 and ThinkPad Regulatory Notice for the Wireless WAN Adapter. Make sure of the following conditions when you use any other external RF option device:

1. When you use any other RF option device, you are requested to confirm that the device conforms to the RF Safety requirement and is approved to use for your computer. 2. You must follow the RF Safety instructions of the RF option device that are included in the user manual of the RF option device. If the RF option device is prohibited to use in conjunction with another transmitters, you must turn off all other wireless features in your computer. 3. 4 Canada Industry Canada (IC) IC Certification number I. Approved wireless devices This section presents the IC Certification and model number of each wireless device. i) User installable wireless LAN adapter v IC: 6317A-RTL8191SE (Model: RTL8191SE) Note: PCI Express Mini Cards for a wireless LAN marketed in the USA and Canada do not support or function in the extended channels (12ch, 13ch). ii) Preinstalled integrated Bluetooth device v IC: 4324A-BRCM1046 (Model: BCM92070MD_LENO) II. User installable wireless LAN adapter There is no certification number of Industry Canada for the PCI Express Mini Card shown on the enclosure of your computer. Instead you will find an indicator pointing to the location of the IC Certification number on the bottom of your computer. The IC certification number is affixed on the approved adapter installed in the PCI Express Mini Card slot, and the IC Certification number is visible prior to installation. For the location of the IC Certification number indicator and the slot, see Location of the FCC ID and IC Certification number label in Access Help. Attention: The computer contains an authentication mechanism. You can install or remove each wireless adapter by yourself. If you install an unauthorized wireless adapter that is not approved for use in the computer, the computer will not start, but only displays an error message and emits audible beeps. III. Preinstalled integrated Bluetooth device If your computer uses a Bluetooth device, the IC Certification number for the Bluetooth device is affixed on the label at the bottom of your computer. The Bluetooth device is preinstalled by Lenovo, and any other device is not approved for use in your computer. If the device requires replacement via the proper steps shown in Getting help and service of the Service and Troubleshooting Guide, shipped with your computer, Lenovo will send you a Customer Replaceable Unit (CRU). IV. WiMAX features The use of the WiMAX features is not permitted in Canada. Do not use the features. To do so would be a violation of Industry Canada regulations. ThinkPad Regulatory Notice 5 V. Low power license-exempt radiocommunication devices (RSS-210) Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. The transmitter devices have been designed to operate with the antennas integrated in the computer, and having a maximum gain of within 3 dBi. The maximum antenna gain permitted for devices in the 5250-5350 MHz, 5470-5725 MHz, and 5725-5825 MHz bands complies with the e.i.r.p. limit in section A9.2 of RSS-210. When you use a wireless LAN adapter in the 802.11 a/n transmission mode:

v The devices for the band 51505250 MHz are only for indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. v High power radars are allocated as primary users (meaning they have priority) of 52505350 MHz and 56505850 MHz and these radars could cause interference and/or damage to LELAN (Licence-Exempt Local Area Network) devices. VI. Exposure of humans to RF fields (RSS-102) The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas Web site at http://www.hc-sc.gc.ca/

The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 2 clause 4.1. Numro dhomologation IC I. Priphriques sans fil homologus Cette section prsente le numro dhomologation IC et le numro de modle de chaque priphrique sans fil. i) Module sans fil installable par lutilisateur v IC: 6317A-RTL8191SE (Model: RTL8191SE) Remarque: Les cartes de rseau local sans fil Express mini-PCI commercialises aux Etats-Unis et au Canada ne prennent pas en charge les canaux tendus (12ch, 13ch) et ne fonctionnent donc pas sur de tels canaux. 6 ii) metteur Bluetooth intgr prinstall v IC: 4324A-BRCM1046 (Model: BCM92070MD_LENO) II. Module sans fil installable par lutilisateur Le botier de votre ordinateur ne comporte pas de numro dhomologation IC

(Industry Canada) pour la carte mini-PCI Express; mais sous votre ordinateur, vous trouverez un indicateur pointant vers lemplacement du numro dhomologation IC. Pour connatre lemplacement du numro dhomologation IC, consultez la section correspondante dans Access Help. Le numro dhomologation IC figure sur la carte homologue installe dans le logement pour carte mini-PCI Express et est visible avant linstallation. Pour savoir o se trouve cet emplacement, consultez la section correspondante dans Access Help. Attention: Lordinateur contient un mcanisme dauthentification. Vous pouvez installer ou dsinstaller tout dispositif sans fil. Si vous installez une carte sans fil qui nest pas homologue dans votre ordinateur, lordinateur ne dmarrera pas mais affichera un message derreur et gnrera des bips sonores. III. metteur Bluetooth intgr prinstall Si votre ordinateur utilise un metteur Bluetooth, le numro dhomologation IC de cet metteur Bluetooth figure sur une tiquette colle sous lordinateur. Lmetteur Bluetooth est prinstall par Lenovo et ne peut pas tre retir par lutilisateur. Sil doit tre remplac pendant la priode de garantie, lopration doit tre effectue par un prestataire de services agr par Lenovo. IV. Fonctions WiMAX Lutilisation de fonctions WiMAX nest pas autorise au Canada. Veuillez ne pas utiliser cette fonction car ce serait une infraction aux lois dIndustrie Canada. V. Remarque relative aux appareils de communication radio de faible puissance sans licence (CNR-210) Le fonctionnement de ce type dappareil est soumis aux deux conditions suivantes:

1. Cet appareil ne doit pas perturber les communications radio, et 2. cet appareil doit supporter toute perturbation, y compris les perturbations qui pourraient provoquer son dysfonctionnement. Les priphriques dmission sont conus pour fonctionner avec des antennes intgres lordinateur et ayant un gain maximal de moins de 3 dBi. Le gain dantenne maximal pour les priphriques dans les bandes de frquence 5250-5350 MHz, 5470-5725 MHz, et 5725-5825 MHz est conforme la limite p.i.r.e nonce dans la section A9.2 de la CNR-210. ThinkPad Regulatory Notice 7 Lorsque vous utilisez la carte pour rseau local sans fil en mode de transmission 802.11 a/n:

v Tout appareil destin la bande 5150-5250 MHz devra tre exclusivement utilis en intrieur afin de rduire les risques de perturbations lectromagntiques gnantes sur les systmes de satellite mobile dans un mme canal. v Les radars forte puissance sont dsigns comme les utilisateurs principaux (cest--dire quils sont prioritaires) des bandes 5250-5350 MHz et 5650-5850 MHz. Ils peuvent provoquer des perturbations lectromagntiques sur les appareils de type LELAN (rseau de communication local sans licence) ou les endommager. VI. Exposition des tres humains aux champs radiolectriques (RF)

(CNR-102) Lordinateur utilise des antennes intgrales faible gain qui nmettent pas un champ lectromagntique suprieur aux normes imposes par le Ministre de la sant canadien pour la population. Consultez le Safety Code 6 sur le site Web du Ministre de la sant canadien ladresse http://www.hc-sc.gc.ca/

Lnergie mise par les antennes relies aux adaptateurs sans fil respecte la limite dexposition aux radiofrquences telle que dfinie par Industrie Canada dans la clause 4.1 du document CNR-102. 8 Electronic emission notices Federal Communications Commission (FCC) Declaration of Conformity v Model: RTL8191SE Note: The wireless LAN/WiMAX adapter (Model: 622ANXHMW) and the Bluetooth device (Model: BCM92070MD_LENO) underwent certification process for the FCC Part 15 Subpart B compliance under each respective FCC ID number. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

v Reorient or relocate the receiving antenna. v v Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. v Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ThinkPad Regulatory Notice 9 Responsible Party:

Lenovo (United States) Incorporated 1009 Think Place-Building One Morrisville, NC 27560 Telephone: 1-919-294-5900 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B Emission Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Avis de conformit la rglementation dIndustrie Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 10 Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both:

Lenovo ThinkPad UltraConnect Other company, product, and service names may be trademarks or service marks of others. Part Number: 63Y0635_1 ThinkPad Regulatory Notice 11 2. Reference only Regulatory notice of a WWAN transmitter device incorporated in the host PC device ThinkPad Regulatory Notice for the Wireless WAN Adapter Read first regulatory information Read this document before using your computer. Be sure to also read ThinkPad Regulatory Notice. This computer complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Install and use your computer according to the following instructions. The latest Regulatory Notice has been uploaded on the Web site. To refer to it, go to http://www.lenovo.com/think/support, click Troubleshooting, and then click Users guides and manuals. Veuillez lire le prsent document avant dutiliser votre ordinateur. Veillez lire galement la consigne rglementaire ThinkPad Regulatory Notice. Cet ordinateur est conforme aux normes de frquence radio et de scurit de tous les pays ou rgions dans lesquels son utilisation sans fil a t homologue. Installez et utilisez lordinateur en respectant les instructions qui suivent. La version la plus rcente de la Notice relative la rglementation a t charge sur le site Web. Pour la consulter, accdez http://www.lenovo.com/

think/support, cliquez sur Troubleshooting, puis sur Users guides and manuals. Copyright Lenovo 2010 1 USA Federal Communications Commission (FCC) If your computer integrates the wireless WAN adapter (Model: Gobi2000), you may connect it to the radiocommunication Public Network in the USA. I. FCC ID of the wireless adapter PCI Express Mini Card:

v FCC ID: J9CGOBI2000-L (Model: Gobi2000) There is no FCC ID for the adapter shown on the enclosure of your computer. Instead you will find an indicator pointing to the location of the FCC ID on the bottom of your computer. The FCC ID is affixed on the approved adapter installed in the PCI Express Mini Card slot, and the FCC ID is visible prior to installation. For the location of the FCC ID indicator and the slot, see Location of the FCC ID and IC Certification number label in Access Help. II. Installation of the approved wireless adapter If no integrated PCI Express Mini Card has been preinstalled in your computer, you can install one, provided by Lenovo as an option. Plug the wireless option adapter into the PCI Express Mini Card slot. For the installation procedure, see Installing and replacing the PCI Express Mini Card for wireless WAN connection in Access Help. Attention: The computers contain an authentication mechanism. If you install an unauthorized PCI Express Mini Card that is not approved for use in your computer, the computer will not start, but only displays an error message and emits audible beeps. III. RF safety compliance The radiated energy from the antenna connected to the wireless WAN adapter conforms to the FCC limit of the SAR (Specific Absorption Rate) requirement regarding 47 CFR Part 2 section 1093, when the computer was tested in the conventional orientation. The transmission antenna is located in the LCD cover. See Location of the UltraConnect wireless antennas in Access Help. IV. Emergency Calls The wireless WAN adapter embedded in the computer does not support voice calls, hence their use for essential communication is not possible, including emergency calls regarding the E911 rule. V. Simultaneous use of RF transmitters The wireless WAN adapter is approved for simultaneous use with certain wireless transmitters. For a list of those transmitters, refer to the latest ThinkPad Regulatory Notice, which has been uploaded on the Web site at:

http://www.lenovo.com/think/support 2 Make sure of the following conditions when you use any other external RF option device:

1. When you use any other RF option device, you are requested to confirm that the device conforms to the RF Safety requirement and is approved to use for your computer. 2. You must follow the RF Safety instructions of the RF option device that 3. are included in the user manual of the RF option device. If the RF option device is prohibited to use in conjunction with another transmitters, you must turn off all other wireless features in your computer. ThinkPad Regulatory Notice for the Wireless WAN Adapter 3 Electronic emission notices Federal Communications Commission (FCC) Declaration of Conformity v Model: Gobi2000 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

v Reorient or relocate the receiving antenna. v v Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. v Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party:

Lenovo (United States) Incorporated 1009 Think Place-Building One Morrisville, NC 27560 Telephone: 1-919-294-5900 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE 4 Canada Industry Canada (IC) IC Certification number User installable wireless WAN adapter:

v IC: 2723A-GOBI2000 (Model: Gobi2000) There is no certification number of Industry Canada for the PCI Express Mini Card shown on the enclosure of your computer. Instead you will find an indicator pointing to the location of the certification number on the bottom of your computer. The IC certification number is affixed on the approved adapter installed in the PCI Express Mini Card slot, and the IC Certification number is visible prior to installation. For the location of the certification number indicator and the slot, see Location of the FCC ID and IC certification number label in Access Help. Attention: The computer contains an authentication mechanism. You can install or remove each wireless adapter by yourself. If you install an unauthorized wireless adapter that is not approved for use in the computer, the computer will not start, but only displays an error message and emits audible beeps. Exposure of humans to RF fields (RSS-102) The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas Web site at http://www.hc-sc.gc.ca/

The radiated energy from the antenna connected to the wireless WAN adapter conforms to the IC limit of the SAR (Specific Absorption Rate) requirement regarding IC RSS-102, Issue 2 clause 4.1. Industry Canada Class B Emission Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. ThinkPad Regulatory Notice for the Wireless WAN Adapter 5 Numro dhomologation IC Module sans fil installable par lutilisateur:

v IC: 2723A-GOBI2000 (Model: Gobi2000) Le botier de votre ordinateur ne comporte pas de numro dhomologation IC

(Industry Canada) pour la carte mini-PCI Express ; mais sous votre ordinateur, vous trouverez un indicateur pointant vers lemplacement du numro dhomologation IC. Pour connatre lemplacement du numro dhomologation, consultez la section Emplacement de ltiquette didentification FCC et du label du numro de certification dans Access Help. Le numro dhomologation IC figure sur la carte homologue installe dans le logement pour carte mini-PCI Express et est visible avant linstallation. Pour savoir o se trouve cet emplacement, consultez la section correspondante dans Access Help. Attention: Lordinateur renferme un mcanisme dauthentification. Vous pouvez installer ou retirer chaque carte sans fil vous-mme. Si vous installez une carte sans fil qui nest pas homologue dans votre ordinateur, lordinateur ne dmarrera pas mais affichera un message derreur et gnrera des bips sonores. Exposition des tres humains aux champs radiolectriques (RF)

(CNR-102) Lordinateur utilise des antennes intgrales faible gain qui nmettent pas un champ lectromagntique suprieur aux normes imposes par le Ministre de la sant canadien pour la population. Consultez le Safety Code 6 sur le site Web du Ministre de la sant canadien ladresse http://www.hc-sc.gc.ca/

Lnergie mise par lantenne relie au adaptateur sans fil respecte la limite concernant le dbit dabsorption spcifique (DAS) telle que dfinie par Industrie Canada dans la clause 4.1 du document CNR-102. Avis de conformit la rglementation dlndustrie Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Le fonctionnement de ce type dappareil est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas perturber les communications radio, et

(2) cet appareil doit supporter toute perturbation, y compris les perturbations qui pourraient provoquer son dysfonctionnement. 6 Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both:

Lenovo ThinkPad UltraConnect Other company, product, and service names may be trademarks or service marks of others. ThinkPad Regulatory Notice for the Wireless WAN Adapter 7 Part Number: 75Y4318 Printed in China 8 Section 3. The screen copies of electronic users guidance Location: FCC ID and IC Certification number label 1/1 Location: FCC ID and IC Certification number label There is no FCC ID or IC Certification number for the PCI Express Mini Card shown on the enclosure of your computer. The FCC ID and IC Certification number label is affixed on the card installed in the Mini PCI Express Card slot of your computer. If no integrated wireless PCI Express Mini Card has been preinstalled in your computer, you can install one. To do this, follow the procedure in Installing and replacing the PCI Express Mini Card for wireless LAN connection or Installing and replacing the PCI Express Mini Card for wireless WAN connection. file://C:\TamaTemp\fccidlbl.htm\fccidlbl.htm 2009/10/13 Location of the UltraConnect wireless antennas 1/1 Location of the UltraConnect wireless antennas 1. Wireless LAN antenna (Auxiliary) The auxiliary antenna connected to the wireless LAN is located at the top left corner of the computer display. 2. Wireless WAN antenna (Auxiliary) If your computer comes with a wireless WAN feature, its transmitter antenna is located at the top left side of the computer display, near the center. 3. Wireless WAN antenna (Main) The main antenna connected to the wireless WAN feature is located at the top right side of the computer display, near the center. 4. Wireless LAN antenna (Main) The main antenna connected to the wireless LAN feature is located at the top right corner of the computer display. file://C:\TamaTemp\antennas.htm\antennas.htm 2009/10/13 Installing and replacing a PCI Express Mini Card for wireless LAN connection 1/3 Installing and replacing a PCI Express Mini Card for wireless LAN connection Before you start, print these instructions. Your computer has a PCI Express Mini Card slot for connection to a wireless LAN. To replace the PCI Express Mini Card with a new one, read the following prerequisites, and then the instructions. Prerequisites for the procedure Danger: During electrical storms, do not connect the cable to or disconnect it from the telephone outlet on the wall. Danger: Electric current from power, telephone, and communication cables is hazardous. To avoid shock hazard, disconnect the cables before opening the cover of this slot. Attention: Before you start installing a PCI Express Mini Card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the card. Replacing the card To replace the card, do as follows:

Note: Your computer may look slightly different from what these illustrations show. 1. Turn off the computer; then disconnect the ac adapter and all cables from the computer. Wait for a few minutes, till the inside of the computer cools, before you start the following procedure. 2. Close the computer display, and turn the computer over. 3. Remove the battery. 4. Loosen the screws on the slot cover (1), then remove the cover (2). file://C:\TamaTemp\replpci.htm\replpci.htm 2009/10/13 Installing and replacing a PCI Express Mini Card for wireless LAN connection 2/3 5. If a tool for removing connectors is included in the package with the new card, use it to disconnect the cables from the card. If no such tool is included, disconnect the cables by picking up the connectors with your fingers and gently unplugging them. 6. Remove the screw (1). The card pops up (2). Remove the card. 7. Align the contact edge of the new card with the corresponding socket contact of the computer. Pivot the card until you can snap it into place (1), and secure the card with the screw (2). 8. Connect the cables to the new PCI Express Mini Card. Note: Be sure to attach the gray cable to the connector marked MAIN on the card and the black cable to the connector marked AUX. file://C:\TamaTemp\replpci.htm\replpci.htm 2009/10/13 Installing and replacing a PCI Express Mini Card for wireless LAN connection 3/3 9. Put the slot cover back in place (1), close the cover (2), and then tighten the screws (3). 10. Reinstall the battery. 11. Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on. file://C:\TamaTemp\replpci.htm\replpci.htm 2009/10/13 Installing and replacing the PCI Express Mini Card for wireless WAN connection 1/2 Installing and replacing the PCI Express Mini Card for wireless WAN connection Before you start, print these instructions. Some ThinkPad models have a PCI Express Mini Card slot for wireless WAN connection. To replace the PCI Express Mini Card with a new one, follow the procedure below. Danger: During electrical storms, do not connect the cable to or disconnect it from the telephone outlet on the wall. Danger: Electric current from power, telephone, and communication cables is hazardous. To avoid shock hazard, disconnect the cables before opening the cover of this slot. Attention: Before you start installing a PCI Express Mini Card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the card. Replacing the PCI Express Mini Card To replace the PCI Express Mini Card, do as follows:

1. Turn off the computer; then disconnect the AC adapter and all cables from the computer. Wait for a few minutes, till the inside of the computer cools, before you start the following procedures. 2. Close the computer display, and turn the computer over. 3. Remove the battery. 4. Remove the keyboard. 5. Remove the palm rest. 6. If a tool for removing connectors is included in the package with the new card, use it to disconnect the cables from the card. If no such tool is included, disconnect the cables from the card by picking up the connectors with your fingers and gently unplugging them. Note: Depending on the system configuration of your computer, the card may have only one connector. 7. Remove the screws that secure the card. mk:@MSITStore:C:\DOCUME~1\murota\LOCALS~1\Temp\Rar$DI02.890\upgrade... 2010/03/12 Installing and replacing the PCI Express Mini Card for wireless WAN connection 2/2 8. Remove the card. 9. Align the contact edge of the new Wireless WAN Card with the corresponding socket contact of the computer. 10. Pivot the card until you can snap it into place by pressing the upper side of the connectors; then secure the card with the two screws. Connect the cables to the new card. Note: Depending on the system configuration of your computer, the card may have only one connector. 11. Reinstall the palm rest. 12. Reinstall the keyboard. 13. Reinstall the battery. 14. Turn the computer over again. Connect the AC adapter and cables to the computer;

then turn it on. mk:@MSITStore:C:\DOCUME~1\murota\LOCALS~1\Temp\Rar$DI02.890\upgrade... 2010/03/12 Wireless connections 1/1 Wireless connections Wireless connection is the transfer of data without the use of cables by means of radio waves only. Depending on the frequency used for data transmission, the area covered, or the type of the device used for data transfer, the following categories of wireless networks may be available to you:

Wireless LAN A wireless local area network covers a relatively small geographic area, such as an office building or a house. Devices based on the 802.11 standards can connect to this network. Wireless WAN A wireless wide area network covers a broader geographic area. Cellular networks are used for data transmission, and access is provided by a wireless service carrier. Bluetooth One of a number of technologies used to create a wireless personal area network. Bluetooth can connect devices a short distance from one another, and is commonly used for connecting peripheral devices to a computer, transferring data between hand-held devices and PC, or remotely controlling and communicating with devices such as mobile phones. Using wireless LAN connections Using wireless WAN connections Using Bluetooth feature Checking wireless connection status Enabling or disabling the wireless feature mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/wireless.htm 2009/10/02 Using wireless LAN connections 1/1 Using wireless LAN connections Your computer comes with a built-in wireless networking card and a configuration utility to help you make wireless connections and monitor the status of your connection, so that you can stay connected to your network while you are in the office, in a meeting room, or at home, with no need for a wired connection. Attention:

boarding the airplane.

If you carry your ThinkPad Notebook with the wireless LAN feature into an airplane, check the services with the airline before

If there are restrictions on the use of computers on an airplane with the wireless feature, you need to disable it before boarding. To disable it, refer to the instructions in Enabling or disabling the wireless feature. Note: You can purchase a wireless networking card as an option. For more information, refer to Finding ThinkPad options. Tips for using the wireless LAN feature

Place your computer so that there are as few obstacles as possible between the wireless LAN access point and the computer.

For the best connection of the wireless LAN feature, open your computer display to an angle of slightly more than 90 degrees.

If you use the wireless feature (the 802.11 standard) of your computer simultaneously with a Bluetooth option, data transmission speed can be delayed and the performance of the wireless feature can be degraded. Wireless networking setup mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/wireconn.htm 2009/10/02 Wireless networking setup 1/1 Wireless networking setup To use the built-in wireless networking card (the 802.11 standard) to communicate, start Access Connections. For Windows 7: To start the Access Connections wizard, see Getting started with Windows 7, and follow the instructions on the screen. For Windows XP: To start the Access Connections wizard, click Start --> All Programs --> ThinkVantage --> Access Connections, and follow the instructions on the screen. Note: Before you start setting up wireless networking connections by using Access Connections, obtain a Network Name (SSID) and your encryption information from your network administrator. Access Connections, a connectivity assistant program, can easily enable one network adapter and disable the other adapters on demand. After setting up your wireless networking connection, you can use the program to quickly switch the network settings. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/wireset.htm 2009/10/02 Using wireless WAN connections 1/1 Using wireless WAN connections Wireless Wide Area Network (wireless WAN) enables you to establish wireless connections over remote public or private networks. These connections can be maintained over a large geographical area, such as a city or an entire country, by use of multiple antenna sites or satellite systems maintained by wireless service providers. Some ThinkPad Notebooks come with a built-in wireless WAN card integrating some wireless WAN technologies, such as 1xEV-DO, HSPA, 3G or GPRS. You can connect to the Internet or your company network with the built-in wireless WAN card and the configuration utility to make a wireless WAN connection and monitor its status. Note: Wireless WAN service is provided by authorized service providers in some countries. To use the wireless WAN feature, start Access Connections. For Windows 7: To start the Access Connections wizard, see Getting started with Windows 7, and follow the instructions on the screen. For Windows XP: To start the Access Connections wizard, click Start --> All Programs --> ThinkVantage --> Access Connections, and follow the instructions on the screen. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/usewan.htm 2009/10/02 Using Bluetooth feature Using Bluethooth feature For Windows 7 For Windows XP 1/6 For Windows 7:

If your computer is equipped with the Integrated Bluetooth features, you can enable or disable the features by pressing Fn+F5. If you press Fn+F5, a list of wireless features is displayed. You can enable or disable the Bluetooth features with a single click. To configure a Bluetooth device or manage connection settings, you can use Bluetooth Devices in Control Panel. 1. Click Start --> Control Panel. 2. Click Hardware and Sound. 3. Click Devices and Printers. To send data to a Bluetooth-enabled device, do as follows:

1. Right-click data that you want to send. 2. Select Send To --> Bluetooth Devices. For details, refer to the Windows online help. Note: If you use the wireless feature (the 802.11 standard) of your computer simultaneously with a Bluetooth option, data transmission speed can be delayed and the performance of the wireless feature can be degraded. For Windows XP:

If your computer is equipped with the Integrated Bluetooth features, you can enable or disable the features by pressing Fn+F5. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/bluetoo.htm 2009/10/02 Using Bluetooth feature 2/6 If you press Fn+F5, a list of wireless features is displayed. You can enable or disable the Bluetooth features with a single click. In Windows XP, you can use either ThinkPad Bluetooth with Enhanced Data Rate Software, or the Microsoft Bluetooth software. By default, ThinkPad Bluetooth with Enhanced Data Rate Software is installed on your computer. Using Bluetooth for the first time on your computer Using the Microsoft Bluetooth software Using ThinkPad Bluetooth with Enhanced Data Rate Software Installing the Microsoft Bluetooth software in Windows XP Installing ThinkPad Bluetooth with Enhanced Data Rate Software in Windows XP Using Bluetooth for the first time on your computer If this is the first time Bluetooth has been used on your computer, use either of the following procedures:

1. Double-click the My Bluetooth Places icon on the desktop, or the Bluetooth icon in the task bar. The Start Using Bluetooth window opens, and some virtual device drivers are installed automatically. 2. Wait until the installation of the drivers is complete. OR 1. Right-click the My Bluetooth Places icon on the desktop, or the Bluetooth icon in the task bar. 2. Select Start Using Bluetooth. The Start Using Bluetooth window opens, and some virtual device drivers are installed automatically. 3. Wait until the installation of the drivers is complete. Some other virtual device drivers will be installed on demand when you use certain Bluetooth profiles for the first time. Using the Microsoft Bluetooth software If you are using Windows XP and want to use the Microsoft standard Bluetooth features, install the software by following the instructions in Installing the Microsoft Bluetooth software in Windows XP. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/bluetoo.htm 2009/10/02 Using Bluetooth feature 3/6 For information about how to use the Bluetooth function, do as follows:

1. Press Fn+F5 to turn on Bluetooth. 2. Click Start --> Control Panel. 3. Click Printers and Other Hardware. 4. Click Bluetooth Devices. 5. Click the Options tab. 6. Click Learn more about Bluetooth Settings. Using ThinkPad Bluetooth with Enhanced Data Rate Software If ThinkPad Bluetooth with Enhanced Data Rate Software is installed on your computer, two icons are displayed on the screen:

My Bluetooth Places on the desktop Bluetooth Configuration in the system tray of the taskbar My Bluetooth Places To use the Bluetooth features, do the following:

1. Double-click the My Bluetooth Places icon on the desktop. 2. Go to Bluetooth Tasks and double-click View devices in range. A list of the devices on which Bluetooth has been enabled appears. 3. Click the device to which you want access. A list of the services available on that device appears, as follows:

Bluetooth keyboard and mouse (Human interface devices)

Printer (HCRP)

Audio gateway

Headset

PIM synchronization

Fax

File transfer

PIM item transfer

Dial-up networking

Network access mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/bluetoo.htm 2009/10/02 Using Bluetooth feature 4/6

Bluetooth Imaging

Hands Free

AV profile 4. Click the service you want. For more information, press the F1 key to open the online help for Bluetooth. Bluetooth Configuration To use the configuration features of Bluetooth, right-click the icon. A pop-up menu appears. Select Bluetooth Setup Wizard or Advanced Configuration. The Bluetooth Setup Wizard has the following capabilities:

Finding all Bluetooth-enabled devices that can provide services

Finding a specific Bluetooth-enabled device that you want to use, and configuring the services on that device

Configuring the Bluetooth-enabled services on your computer that are provided for remote devices

Configuring the name and device type of your computer The Advanced Configuration has the following functions:

Configuring the name and device type of your computer

Configuring your computer settings so that remote Bluetooth-enabled devices can find your computer

Configuring your computer settings so that your computer can find remote Bluetooth-enabled devices

Configuring, on your computer, the Bluetooth-enabled services provided for remote devices

Configuring the services on remote Bluetooth-enabled devices

Displaying information about Bluetooth hardware For details, refer to the help for Bluetooth. To see the help, double-click My Bluetooth Places, and click Help and then Bluetooth help. Another way to start the help is to right-click Bluetooth Configuration in the system tray of the taskbar, and click Advanced Configuration and then Help. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/bluetoo.htm 2009/10/02 Using Bluetooth feature 5/6 Installing the Microsoft Bluetooth software in Windows XP If you want to use the Microsoft Bluetooth software, do as follows:

First uninstall the ThinkPad Bluetooth with Enhanced Data Rate Software. 1. Turn Bluetooth power off. 2. Click Start --> Control Panel. 3. Click Add/Remove Programs. 4. Select ThinkPad Bluetooth with Enhanced Data Rate Software; then click Change/Remove to uninstall the software. 5. Follow the instructions on the screen. Next install the Microsoft Bluetooth software, as follows:

1. Turn Bluetooth power on. Microsoft Bluetooth software is loaded automatically. 2. If the Found New Hardware Wizard window pops up, do the following:

1. Select No, not this time, and then click Next. 2. Select Install from a list or specific location (Advanced); then click Next. 3. Select Search for the best driver in those locations. 4. Select Include this location in the search:, and type "C:\SWTOOLS\Drivers\MSBTooth," or specify the location in which you placed the extracted INF file. Then click Next. 3. Click Finish. Installing ThinkPad Bluetooth with Enhanced Data Rate Software in Windows XP If you are using the Microsoft Bluetooth software and want to use ThinkPad Bluetooth with Enhanced Data Rate Software instead, replace the Microsoft Bluetooth software with ThinkPad Bluetooth with Enhanced Data Rate Software as follows:

1. Press Fn+F5 to turn the Bluetooth power on. 2. Click Start --> Run. 3. Type "C:\SWTOOLS\Drivers\TPBTooth\Setup.exe" (or specify the full path to the setup.exe file you have downloaded from mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/bluetoo.htm 2009/10/02 Using Bluetooth feature 6/6 http://www.lenovo.com/think/support) then click OK. 4. Click Next. 5. Select I accept the terms in the license agreement; then click Next. 6. Click Next to select the default destination folder. If you need to change the destination folder, click Change, select or enter the name of the destination folder in the Change current destination folder window, and click OK. 7. Click Install to begin installation. 8. Click OK to accept the driver signature. 9. Click Finish. 10. Restart the computer if necessary. If you did not turn the Bluetooth power on before installing ThinkPad Bluetooth with Enhanced Data Rate Software -- that is, if you skipped step 1 -- replace the Bluetooth driver, as follows:

1. Click Start --> Control Panel. 2. Click Performance and Maintenance; then click System. 3. Click the Hardware tab; then click Device Manager. 4. Double-click Bluetooth Radios to extract the Bluetooth Radios device tree. 5. Double-click the ThinkPad Bluetooth with Enhanced Data Rate icon to open the Properties window. 6. Click the Driver tab; then click Update Driver. 7. Click No, not this time, and then click Next. 8. Select Install from a list or specific location (Advanced), and then click Next. 9. Select Don't search. I will choose the driver to install; then click Next. 10. Select the driver that has no "Digital Signed" icon; then click Next. 11. Click Finish. Note: If you use the wireless feature (the 802.11 standard) of your computer simultaneously with a Bluetooth option, data transmission speed can be delayed and the performance of the wireless feature can be degraded. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/bluetoo.htm 2009/10/02 Checking wireless connection status Checking wireless connection status Access Connections Gauge (Windows 7) Access Connection icon and wireless status icon 1/3 Access Connections Gauge (Windows 7) If your computer is running Windows 7, the Access Connections Gauge in the task bar displays the signal strength and status of your wireless connection. Note: To display Access Connections Gauge in the task bar, see the Help in Access Connections. You can find more detailed information about the signal strength and status of your wireless connection by opening Access Connections or by right-clicking the Access Connections Gauge in the task bar and selecting View Status of Wireless Connection. Access Connections Gauge states: wireless LAN Power to the wireless radio is off or no signal. Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve signal strength, move your system closer to the wireless access point. Power to the wireless radio is on. The signal strength of the wireless connection is marginal. Power to the wireless radio is on. The signal strength of the wireless connection is excellent.

Note: For more information about Access Connections Gauge, see the Help in Access Connections. Access Connections Gauge states: wireless WAN

No signal Signal level 1 mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/WIRESTAT.HTM 2009/10/02 Checking wireless connection status 2/3

Signal level 3 Access Connections icon and wireless status icon The Access Connections icon displays general connection status. The wireless status icon displays the signal strength and status of your wireless connection. You can find more detailed information about the signal strength and status of your wireless connection either by opening Access Connections or by double-clicking the Access Connections wireless status icon in the task bar. Note: If your computer is running Windows 7, to display the Access Connections icon and wireless status icon, click Show hidden icons in the task bar. To add it to the task bar permanently, click Customize and proceed to customize the settings. For more information about the icon, see the Help in Access Connections. Access Connections icon states

No location profile is active or none exists. Current location profile is disconnected. Current location profile is connected. Wireless status icon states: wireless LAN

Power to the wireless radio is off. Power to the wireless radio is on. No association. Power to the wireless radio is on. No signal. Power to the wireless radio is on. The signal strength of the wireless connection is excellent. Power to the wireless radio is on. The signal strength of the wireless connection is marginal. Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve signal strength, move your system closer to the wireless access point. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/WIRESTAT.HTM 2009/10/02 Checking wireless connection status 3/3 Note: If you have trouble in making a connection, try moving your computer closer to your wireless access point. Wireless status icon states: wireless WAN

Power to the WAN radio is off. No association No signal Signal level 1 Signal level 2 Signal level 3 mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/WIRESTAT.HTM 2009/10/02 Enabling or disabling the wireless feature 1/1 Enabling or disabling the wireless feature To enable or disable the wireless feature, press Fn+F5. A list of wireless features is displayed. You can turn the feature on and off with a single click. You can also enable or disable the feature by the following procedures. To enable the wireless feature, do as follows:

1. Click the Access Connections wireless icon in the system tray. 2. Click Power On Wireless Radio. To disable the wireless feature, do as follows:

1. Click the Access Connections wireless icon in the system tray. 2. Click Power Off Wireless Radio. Note: You can use the wireless radio switch to disable the wireless radio of all the wireless devices on your computer. Note: If your computer is a Windows 7 model, click Show hidden icons in the task bar. The Access Connections wireless icon is displayed. To add it to the task bar permanently, click Customize and proceed to customize the settings. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\wireless.chm::/Wlenab.htm 2009/10/02 Wireless related information 1/2 Wireless related information Wireless interoperability Wireless LAN PCI Express Mini Card is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to:

The 802.11b/g or 802.11n draft 2.0 standard on Wireless LANs, as defined and approved by the Institute of Electrical and Electronics Engineers.

The Wireless Fidelity (WiFi) certification as defined by the Wi-Fi Alliance. Bluetooth device is designed to be interoperable with any Bluetooth product that is compliant to Bluetooth Specification 2.1 + EDR as defined by the Bluetooth SIG. Following profiles are supported by Bluetooth device:

Generic Access

Service Discovery

Serial Port

Dial-up Networking

FAX

LAN Access using PPP

Personal Area Network

Generic Object Exchange

Generic Object Push

File Transfer

Synchronization

Audio Gateway

Headset

Printer

Human Interface Devices (Keyboard/Mouse)

Basic Image

Handsfree

AV

Phone Book Access Profile (PBAP) (Windows 7)

VDP-Sync Profile (Windows 7) mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\masteraibl.chm::/wiinfo.htm 2009/10/02 Wireless related information 2/2 Usage environment and your health Wireless LAN PCI Express Mini Card, Wireless WAN PCI Express Mini Card, and Bluetooth device emit radio frequency electromagnetic energy like other radio devices. However, the level of energy emitted is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Due to the fact that Wireless LAN PCI Express Mini Card, Wireless WAN PCI Express Mini Card, and Bluetooth device operate within the guidelines found in radio frequency safety standards and recommendations, Lenovo believes the integrated wireless cards are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situation or environment, the use of Wireless LAN PCI Express Mini Card, Wireless WAN PCI Express Mini Card or Bluetooth device may be restricted by the proprietor of the building or responsible representatives of the organization. These situations and areas may for example include:

Using the integrated wireless cards on board of airplanes, in hospitals or near petrol stations, blasting areas (with electro-explosive devices), medical implants or body-worn electronic medical devices, e.g. pace makers.

In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization (e.g., airport or hospital), you are encouraged to ask for authorization to use Wireless LAN PCI Express Mini Card, Wireless WAN PCI Express Mini Card or Bluetooth device prior to turning on the computer. mk:@MSITStore:C:\\MKCHM_1stDraft\MKCHM_1stDraft\masteraibl.chm::/wiinfo.htm 2009/10/02 1/1 Verifying the connection of replaceable or upgradable devices

PCI Express Mini Card for wireless LAN connection You can replace or upgrade the following devices for your ThinkPad Notebook. If you experience a problem, click each of the following in turn, and verify that each device is correctly and securely installed on and connected to the computer.

Battery

Memory

AC adapter and power cord (refer also to the Setup Instructions.)

PCI Express Mini Card for wireless WAN connection

Hard disk drive

SIM card

TrackPoint cap file://C:\DOCUME~1\Murota\LOCALS~1\Temp\2T9ZZ2MC.htm 2009/10/13

Intel Wireless Adapter Information Guide This version of Intel PROSet/Wireless WiFi Software is compatible with the adapters listed next. However, note that newer features provided in this software release are generally not supported for older, legacy adapters. Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internet connection. All of these features can be explored using a WiFi network in your home or office. This WiFi network solution is designed for both home and business use. Additional users and features can be added as your networking needs grow and change. This guide contains basic information about Intel adapters. It includes information about several adapter properties that you can set to control and enhance the performance of your adapter with your particular wireless network and environment. Intel wireless adapters enable fast connectivity without wires for desktop and notebook PCs. Adapter Settings Regulatory Information Specifications Important Information Support Warranty Glossary Depending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g, and 802.11n (draft 2.0) wireless standards. Operating at 5 GHz or 2.4 GHz frequency at data rates of up to 450 Mbps, you can now connect your computer to existing high-speed networks that use multiple access points within large or small environments. Your WiFi adapter maintains automatic data rate control according to the access point location and signal strength to achieve the fastest possible connection. All of your wireless network connections are easily managed by the WiFi connection utility. Profiles that are set up through the WiFi connection utility provide enhanced security measures with 802.1X network authentication. Information in this document is subject to change without notice. 20042012 Intel Corporation. All rights reserved. Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 USA The copying or reproducing of any material in this document in any manner whatsoever without the written permission of Intel Corporation is strictly forbidden. Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Intel disclaims any proprietary interest in trademarks and trade names other than its own. Microsoft and Windows are registered trademarks of Microsoft Corporation. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

*Other names and brands may be claimed as the property of others. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein.

"IMPORTANT NOTICE FOR ALL USERS OR DISTRIBUTORS:

Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all necessary local and governmental regulatory agency requirements for the regions that they are designated and/or marked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars, satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, and limit usage to avoid interference with these devices. In many instances Intel is required to provide test data to prove regional and local compliance to regional and governmental regulations before certification or approval to use the product is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully control parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include, without limitation, RF power, spectrum usage, channel scanning, and human exposure. For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format with the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, or code with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches, utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will be solely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under any theory of liability for any issues associated with the modified products, including without limitation, claims under the warranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assist in providing support to any third parties for such modified products. Note: Many regulatory agencies consider Wireless LAN adapters to be "modules", and accordingly, condition system-level regulatory approval upon receipt and review of test data documenting that the antennas and system configuration do not cause the EMC and radio operation to be non-compliant."

January 31, 2012 Back to Contents Adapter Settings The Advanced tab displays the device properties for the WiFi adapter installed on your computer. How to Access At the Intel PROSet/Wireless WiFi Connection Utility, Advanced Menu click Adapter Settings. Select the Advanced tab. WiFi Adapter Settings Description Name 802.11n Channel Width

(2.4 GHz) Description Set high throughput channel width to maximize performance. Set the channel width to Auto or 20MHz. Use 20MHz if 802.11n channels are restricted. This setting applies to 802.11n capable adapters only. 802.11n Channel Width

(5.2 GHz) NOTE: This setting does not apply to the Intel Wireless WiFi Link 4965AGN (uses 20 MHz channel width only). Set high throughput channel width to maximize performance. Set the channel width to Auto or 20MHz. Use 20MHz if 802.11n channels are restricted. This setting applies to 802.11n capable adapters only. NOTE: This setting does not apply to the following adapters:

Intel WiFi Link 1000 Intel Wireless WiFi Link 4965AGN 802.11n Mode The 802.11n standard builds on previous 802.11 standards by adding multiple-input multiple-

output (MIMO). MIMO increases data throughput to improve transfer rate. Select Enabled or Disabled to set the 802.11n mode of the WiFi adapter. Enabled is the default setting. This setting applies to 802.11n capable adapters only. NOTE: To achieve transfer rates greater than 54 Mbps on 802.11n connections, WPA2*-AES security must be selected. No security (None) can be selected to enable network setup and troubleshooting. Ad Hoc Channel An administrator can enable or disable support for high throughput mode to reduce power-

consumption or conflicts with other bands or compatibility issues. Unless the other computers in the ad hoc network use a different channel from the default channel, there is no need to change the channel. Value: Select the permitted operating channel from the list. 802.11b/g: Select this option when 802.11b and 802.11g (2.4 GHz) ad hoc band frequency is used. 802.11a: Select this option when 802.11a (5 GHz) ad hoc band frequency is used. This setting does not apply to the Intel WiFi Link 1000 adapter. Ad Hoc Power Management NOTE: When an 802.11a channel is not displayed, initiating ad hoc networks is not supported for 802.11a channels. Set power saving features for device to device (ad hoc) networks. Disable: Select when connecting to ad hoc networks that contain stations that do not support ad hoc power management Maximum Power Savings: Select to optimize battery life. Noisy Environment: Select to optimize performance or connecting with multiple clients. Ad Hoc QoS Mode Quality of Service (QoS) control in ad hoc networks. QoS provides prioritization of traffic from the access point over a wireless LAN based on traffic classification. WMM (Wi-Fi Multimedia) is the QoS certification of the Wi-Fi Alliance (WFA). When WMM is enabled, the WiFi adapter uses WMM to support priority tagging and queuing capabilities for Wi-Fi networks. WMM Enabled (Default) WMM Disabled Fat Channel Intolerant This setting communicates to surrounding networks that this WiFi adapter is not tolerant of 40MHz channels in the 2.4GHz band. The default setting is for this to be turned off (disabled), so that the adapter does not send this notification. NOTE: This setting does not apply to the following adapters:

Intel Wireless WiFi Link 4965AG_ Intel PRO/Wireless 3945ABG Network Connection Mixed mode protection Power Management Use to avoid data collisions in a mixed 802.11b and 802.11g environment. Request to Send/Clear to Send (RTS/CTS) should be used in an environment where clients may not hear each other. CTS-to-self can be used to gain more throughput in an environment where clients are in close proximity and can hear each other. Lets you select a balance between power consumption and WiFi adapter performance. The WiFi adapter power settings slider sets a balance between the computer's power source and the battery. Use default value: (Default) Power settings are based on the computer's power source. Manual: Adjust the slider for the desired setting. Use the lowest setting for maximum battery life. Use the highest setting for maximum performance. Roaming Aggressiveness NOTE: Power consumption savings vary based on Network (Infrastructure) settings. This setting lets you define how aggressively your wireless client roams to improve connection to an access point. Throughput Enhancement Transmit Power Default: Balanced setting between not roaming and performance. Lowest: Your wireless client will not roam. Only significant link quality degradation causes it to roam to another access point. Highest: Your wireless client continuously tracks the link quality. If any degradation occurs, it tries to find and roam to a better access point. Changes the value of the Packet Burst Control. Enable: Select to enable throughput enhancement. Disable: (Default) Select to disable throughput enhancement. Default Setting: Highest power setting. Lowest: Minimum Coverage: Set the adapter to the lowest transmit power. Enables you to expand the number of coverage areas or confine a coverage area. Reduces the coverage area in high traffic areas to improve overall transmission quality and avoids congestion and interference with other devices. Highest: Maximum Coverage: Set the adapter to a maximum transmit power level. Select for maximum performance and range in environments with limited additional WiFi radio devices. NOTE: The optimal setting is for a user to always set the transmit power at the lowest possible level that is still compatible with the quality of their communication. This allows the maximum number of wireless devices to operate in dense areas and reduce interference with other devices that it shares the same radio spectrum with. NOTE: This setting takes effect when either Network (Infrastructure) or Device to Device (ad hoc) mode is used. Wireless Mode Select which mode to use for connection to a wireless network:

802.11a only: Connect the wireless WiFi adapter to 802.11a networks only. Not applicable for all adapters. 802.11b only: Connect the wireless WiFi adapter to 802.11b networks only. Not applicable for all adapters. 802.11g only: Connect the wireless WiFi adapter to 802.11g networks only. 802.11a and 802.11g: Connect the WiFi adapter to 802.11a and 802.11g networks only. Not applicable for all adapters. 802.11b and 802.11g: Connect the WiFi adapter to 802.11b and 802.11g networks only. Not applicable for all adapters. 802.11a, 802.11b, and 802.11g: (Default) - Connect to either 802.11a, 802.11b or 802.11g wireless networks. Not applicable for all adapters. OK Cancel Saves settings and returns to the previous page. Closes and cancels any changes. Microsoft Windows* Advanced Options (Adapter Settings) To access the Windows* XP Advanced options:

1. Start Windows and log on with administrative privileges. 2. From your desktop, right-click My Computer and click Properties. 3. Click the Hardware tab. 4. Click Device Manager. 5. Double-click Network adapters. 6. Right-click the name of the installed WiFi adapter that is in use. 7. Click Properties. 8. Select the Advanced tab. 9. Select the property you want (for example, Mixed Mode Protection, Power Management). 10. To select a new value or setting, click Use default value to clear the checkbox. Then select a new value or setting. To return to the default value, click the Use default value checkbox. (The Use default value box is not present for all properties, for example, Ad Hoc Channel. In this case, simply select the setting you want.) 11. To save your settings and exit the window, click OK. Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Regulatory Information NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 and similar standards), the information provided herein is subject to change. Intel Corporation assumes no responsibility for errors or omissions in this document. Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 Intel WiFi/WiMAX Wireless Adapters Information in this section supports the following wireless adapters:

Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N + WiMAX 6250 See Specifications for complete wireless adapter specifications. NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above. The following information is provided:

Information for the User Regulatory Information Information for the User Safety Notices USAFCC and FAA The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency

(RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:

Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. Use in specific environments:

The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use. Antenna Warnings Warning: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices

(wireless adapters) because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network. Local Restrictions on 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e Radio Usage Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The device transmit power control

(TPC) interface is part of the Intel PROSet/Wireless WiFi Connection Utility Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. For country-specific information, see the additional compliance information supplied with the product. Wireless Interoperability The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:

IEEE Std. 802.11b compliant Standard on Wireless LAN IEEE Std. 802.11g compliant Standard on Wireless LAN IEEE Std. 802.11a compliant Standard on Wireless LAN IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN IEEE 802.16e-2005 Wave 2 compliant Wireless Fidelity certification, as defined by the Wi-Fi Alliance WiMAX certification as defined by the WiMAX Forum The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

Using the wireless adapter on board airplanes, or Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. WEEE Regulatory Information Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. This device is intended for OEM integrators only. Please see the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved access point. Any changes or modifications to this product not expressly approved by Intel could void the user's authorization to operate the product. The requirements described within this document are provided to OEM integrators installing Intel wireless adapters in host platforms. Strict adherence to these requirements is necessary to meet the conditions of compliance with FCC rules, including RF exposure. When all requirements described herein are fulfilled, the Intel wireless adapters may be installed in host platforms with no further restrictions when incorporating into host systems. If any of the requirements herein are not satisfied, the OEM integrator is responsible to conduct the necessary system level regulatory testing and/or obtain the required approvals for compliance. Antenna Type and Gains Only antennas of the same type and with equal or less gains as shown below may be used with the Intel wireless adapters. Other types of antennas and/or higher gain antennas are not authorized. Antenna Type Antenna Location 2.4GHz 2.6GHz 5.2GHz 5.5GHz

(Main/Aux) Peak Gain Peak Gain Peak Gain Peak Gain PIFA Main Aux MIMO in dBi*

in dBi*

in dBi*

in dBi*

3.24 3.47 3.73 4.77 5.7GHz Peak Gain in dBi*

4.97

*All antenna gains include cable loss. Antenna Placement Within the Host System To ensure RF exposure compliance, the antenna(s) used with the Intel wireless adapters must be installed in the host system to provide a minimum separation distance from all persons, in all operating modes and orientations of the host system, with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the antenna when installed in the host system. Wireless Adapter Minimum required antenna-to-user separation distance Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Wireless-N + WiMAX 6350 18 mm 17 mm Simultaneous Transmission of Intel Wireless Adapters with Other Integrated or Plug-In Transmitters Based upon FCC Knowledge Database publication number 616217 D03 Supplement https://fjallfoss.fcc.gov/kdb/GetAttachment.html?id=30257, when there are multiple transmitting devices installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements. OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 D03 Supplement document for all details in making this assessment to determine if any additional requirements for testing or FCC approval is necessary. Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label. The Intel wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines. Local Restriction of 802.11a, 802.11b, 802.11g, and 802.11n Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. FCC Radio Frequency Interference Requirements This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this wireless adapter to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. This wireless adapter is intended for OEM integrators only. This wireless adapter cannot be co-located with any other transmitter unless approved by the FCC. USAFederal Communications Commission (FCC) This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. Interference Statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Safety Approval Considerations This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:

It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd edition including the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure). The device shall be supplied by a SELV source when installed in the end-use equipment. A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 60950-

1 2nd edition. Low Halogen Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB /

substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment. Taiwan Radio Approvals To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document. Regulatory Markings A list of required regulatory markings can be found on the web at http://www.intel.com/support/wireless/wlan/

To find the regulatory information for your adapter, click on the link for your adapter. Then click Additional Information > Regulatory Documents. Intel WiFi Adapters, 802.11n Compliant The information in this section applies to the following products:

Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Ultimate-N 6300 See Specifications for wireless adapter specifications. NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above. The following information is provided:

Information for the User Regulatory Information Information for the User Safety Notices USAFCC and FAA The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency

(RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:

Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. Use in specific environments:

The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use. Antenna Warnings Warning: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices

(wireless adapters) because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network. Local Restrictions on 802.11a, 802.11b, 802.11g and 802.11n Radio Usage Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The device transmit power control (TPC) interface is part of the Intel PROSet/Wireless WiFi Connection Utility Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. For country-specific information, see the additional compliance information supplied with the product. Wireless Interoperability The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:

IEEE Std. 802.11b compliant Standard on Wireless LAN IEEE Std. 802.11g compliant Standard on Wireless LAN IEEE Std. 802.11a compliant Standard on Wireless LAN IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN Wireless Fidelity certification, as defined by the Wi-Fi Alliance The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

Using the wireless adapter on board airplanes, or Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. WEEE Regulatory Information Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. This device is intended for OEM integrators only. Please see the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved access point. Any changes or modifications to this product not expressly approved by Intel could void the user's authorization to operate the product. The requirements described within this document are provided to OEM integrators installing Intel wireless adapters in host platforms. Strict adherence to these requirements is necessary to meet the conditions of compliance with FCC and Industry Canada rules, including RF exposure. When all requirements described herein are fulfilled, the Intel wireless adapters may be installed in host platforms with no further restrictions when incorporating into host systems. If any of the requirements herein are not satisfied, the OEM integrator is responsible to conduct the necessary system level regulatory testing and/or obtain the required approvals for compliance. Antenna Type and Gains Only antennas of the same type and with equal or less gains as shown below may be used with the Intel wireless adapters. Other types of antennas and/or higher gain antennas are not authorized. Antenna Type Antenna Location 2.4GHz 2.6GHz 5.2GHz 5.5GHz 5.7GHz

(Main/Aux) Peak Gain Peak Gain Peak Gain Peak Gain PIFA Main Aux MIMO in dBi*

in dBi*

in dBi*

in dBi*

3.24 3.47 3.73 4.77 Peak Gain in dBi*

4.97

*All antenna gains include cable loss. Antenna Placement Within the Host System To ensure RF exposure compliance, the antenna(s) used with the Intel wireless adapters must be installed in the host system to provide a minimum separation distance from all persons, in all operating modes and orientations of the host system, with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the antenna when installed in the host system. Wireless Adapter Minimum required antenna-to-user separation distance Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000*

Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Advanced-N 6200*

Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Ultimate-N 6300

* This wireless adapter may be installed in mobile devices only

(requires > 20 cm antenna separation from the body of user). 9 mm 9 mm 8 mm 9 mm 20 mm 8 mm 9 mm 9 mm 20 mm 12 mm 12 mm 12 mm 13 mm Simultaneous Transmission of Intel Wireless Adapters with Other Integrated or Plug-In Transmitters Based upon FCC Knowledge Database publication number 616217 D03 Supplement https://fjallfoss.fcc.gov/kdb/GetAttachment.html?id=30257, when there are multiple transmitting devices installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements. OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 D03 Supplement document for all details in making this assessment to determine if any additional requirements for testing or FCC approval is necessary. Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label. The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. For country-specific approvals, see Radio Approvals. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines. Local Restriction of 802.11a, 802.11b, 802.11g, and 802.11n Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from permissible settings and restrictions in the country of use could be an infringement of national law and may be punished as such. FCC Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz and 5.470 to 5.725 GHz frequency ranges. FCC requires this product to be used indoors for the frequency ranges 5.15 to 5.25 GHz and 5.470 to 5.725 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. No configuration controls are provided for this wireless adapter allowing any change in the frequency of operations outside the FCC grant of authorization for U.S operation according to Part 15.407 of the FCC rules. This device is intended for OEM integrators only. This device cannot be co-located with any other transmitter unless approved by the FCC. USAFederal Communications Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. NOTE: The radiated output power of the adapter is far below the FCC radio frequency exposure limits. Nevertheless, the adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20cm between you (or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device. Interference Statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Safety Approval Considerations This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:

It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd edition including the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure). The device shall be supplied by a SELV source when installed in the end-use equipment. A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 60950-

1 2nd edition. Low Halogen Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB /

substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment. Canada Industry Canada (IC) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil se conforme Canada d'Industrie normes de RSS permis-exempt. L'opration est assujetti au suivre deux conditions : (1) cet appareil ne peut pas causer l'intervention, et (2) cet appareil doit accepter de l'intervention, y compris l'intervention qui peut causer l'opration non dsire de l'appareil. Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-

GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. To comply with RF exposure requirements all antennas should be located at a minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body of all persons. Attention: lutilisation dun rseau sans fil IEEE802.11a est rstreinte une utilisation en intrieur cause du fonctionement dans la bande de frquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit utilis lintrieur des btiments pour la bande de frquence 5.15-5.25 GHz afin de rduire les possibilits dinterfrences nuisibles aux canaux co-existants des systmes de transmission satellites. Les radars de puissances ont fait lobjet dune allocation primaire de frquences dans les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent crer des interfrences avec ce produit et/ou lui tre nuisible. Le gain dantenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin dtre conforme aux limites de puissance isotropique rayonne quivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionement point--point. Se pour conformer aux conditions d'exposition de RF toutes les antennes devraient tre localises une distance minimum de 20 cm, ou la distance de sparation minimum permise par l'approbation de module, du corps de toutes les personnes. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil se conforme Canada d'Industrie normes de RSS permis-exempt. L'opration est assujetti au suivre deux conditions : (1) cet appareil ne peut pas causer l'intervention, et (2) cet appareil doit accepter de l'intervention, y compris l'intervention qui peut causer l'opration non dsire de l'appareil. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication. Sous les rglements de Canada d'Industrie, cet metteur de radio peut fonctionner utilisant seulement une antenne d'un type et un maximum (ou moindre) le gain a approuv pour l'metteur par Canada d'Industrie. Pour rduire l'intervention potentielle de radio aux autres utilisateurs, le type d'antenne et son gain devrait tre si choisie que l'quivalent a rayonn d'isotropiement le pouvoir (e.i.r.p.) n'est pas plus que ce ncessaire pour la communication russie. European Union The low band 5.15 -5.35 GHz is for indoor use only. This equipment complies with the essential requirements of the European Union directive 1999/5/EC. See Statements of European Union Compliance. European Union Declarations of Conformity The European Union Declaration of Conformity for each adapter is available at:

http://www.intel.com/support/wireless/wlan/. To find the Declaration of Conformity for your adapter, click on the link for your adapter. Then click Additional Information > Regulatory Documents. Japan Indoor use only in the 5Ghz band. Korea Morocco The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant and Taza. The operation of this product in the radio channels 4, 5, 6 et 7 (2425 - 2442 MHz) is not authorized in the following cities: Aroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Bni Hafida, Cabo Negro, Casablanca, Fs, Lakbab, Marrakech, Merchich, Mohammdia, Rabat, Sal, Tanger, Tan Tan, Taounate, Tit Mellil, Zag. Taiwan Radio Approvals To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document. Regulatory Markings A list of required regulatory markings can be found on the web at http://www.intel.com/support/wireless/wlan/

To find the regulatory information for your adapter, click on the link for your adapter. Then click Additional Information > Regulatory Documents. Statement of European Compliance Each of the adapters listed below comply with the essential requirements of the European Union directive 1999/5/EC. Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Specifications Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel WiFi Link 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 Intel Centrino Wireless-N 100, Intel Centrino Wireless-N 105, Intel Centrino Wireless-N 130 and Intel Centrino Wireless-N 135 Form Factor Dimensions PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius Antenna Interface Connector Antenna Diversity On-board diversity Connector Interface Voltage Operating Temperature Humidity WiFi Frequency Modulation Frequency band Modulation Wireless Medium Channels IEEE 802.11n Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data 11, 5.5, 2, 1 Mbps 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. MIMO Configuration: 1X1 CCK, DQPSK, DBPSK Tx/Rx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps Rates Bluetooth Support Intel Centrino Wireless-N 100: None Intel Centrino Wireless-N 105: None Intel Centrino Wireless-N 130: Bluetooth 2.1, 2.1 + EDR, 3.0, 3.0+HS Intel Centrino Wireless-N 135: Bluetooth 4.0 (Bluetooth Low-Energy and Bluetooth 3.0 +HS) Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-

Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions, v4.0 General Operating Systems Windows* 7 (32-bit and 64-bit) Wi-Fi Alliance*

certification Cisco Compatible Extensions certification IEEE Feature Sets Architecture Security IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA UL, C-UL, CB (IEC 60590) Product Safety Intel WiFi Link 1000 WiFi / WiMAX Form Factor SKUs Dimensions Antenna Interface Connector Antenna Diversity Connector Interface Voltage Operating Temperature Humidity WiFi Frequency Modulation Frequency band Modulation Wireless Medium Channels IEEE 802.11n Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data PCI Express* Mini Card and Half-Mini Card Intel WiFi Link 1000 - 1X2 MC/HMC Mini Card: Width 2.0 in x Length 1.18 in x Height 0.18 in (50.80 mm x 30 mm x 4.5 mm) Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 90% non-condensing (at temperatures of 25 C to 35 C) 2.4 GHz (802.11b/g/n) 2.41-2.474 GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Rates WiFi General Operating Systems Wi-Fi Alliance*

certification Cisco Compatible Extensions certification WLAN Standard Architecture Security Encryption Product Safety Microsoft Windows* XP (32 and 64 bit) and Windows Vista* (32 and 64 bit), Ubuntu Linux*

Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions, v4.0 IEEE 802.11g, 802.11b, 802.11n, 802.11d, 802.11e, 802.11i, Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, 802.1X: EAP-SIM, LEAP, PEAP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA AES-CCMP 128-bit, WEP 128-bit and 64-bit, CKIP, TKIP UL, C-UL, CB (IEC 60590) Intel Centrino Wireless-N 2200 and Intel Centrino Wireless-N 2230 Form Factor Dimensions PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius Antenna Interface Connector Antenna Diversity On-board diversity Connector Interface Voltage Operating Temperature Humidity WiFi Frequency Modulation Frequency band Modulation Wireless Medium Channels IEEE 802.11n Data Rates 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. MIMO Configuration: 2X2 CCK, DQPSK, DBPSK IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth Support Tx/Rx: 300, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Centrino Wireless-N 2200: None Intel Centrino Wireless-N 2230: Bluetooth 4.0 (Bluetooth Low-Energy and Bluetooth 3.0 +HS) Product Safety Form Factor Dimensions Antenna Interface Connector Antenna Diversity Network Standards Connector Interface Voltage Operating Temperature Humidity WiFi Network Standards General Operating Systems Windows* 7 (32-bit and 64-bit) Wi-Fi Alliance*

certification Cisco Compatible Extensions certification IEEE Feature Sets Architecture Security Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-

Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions, v4.0 IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA UL, C-UL, CB (IEC 60590) Intel Centrino Wireless-N 1030 and Intel Centrino Advanced-N 6230 PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 802.11a/b/g/n (varies by adapter) and Bluetooth 3.0 + HS 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) Intel Centrino Wireless-N 1030: 802.11b/g/n Intel Centrino Advanced-N 6230: 802.11a/g/n 5 GHz (802.11a/n) Frequency Modulation Frequency band 5.15 GHz - 5.85 GHz (dependent on country) Modulation Wireless Medium Channels IEEE 802.11n Data Rates BPSK, QPSK, 16 QAM, 64 QAM 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. Intel Centrino Advanced-N 6230:

2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Intel Centrino Wireless-N 1030:

Rx (Mbps): 300, 270, 243, 240, 180 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General Operating Systems Wi-Fi Alliance*

certification Rx/Tx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Bluetooth Version 3.0 + HS Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2P Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification WLAN Standard IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Security Product Safety UL, C-UL, CB (IEC 60590) Intel Centrino Advanced-N 6235 Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-

bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Form Factor Dimensions PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 802.11a/b/g/n and Bluetooth 4.0 Antenna Interface Connector Antenna Diversity Network Standards Connector Interface Voltage Operating Temperature Humidity Frequency Modulation Frequency band 5.15 GHz - 5.85 GHz (dependent on country) Modulation Wireless BPSK, QPSK, 16 QAM, 64 QAM 5 GHz UNII: Orthogonal Frequency Division 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Medium Channels IEEE 802.11n Data Rates IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General Operating Systems Wi-Fi Alliance*

certification Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps Multiplexing (OFDM) 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Bluetooth Version 4.0 (3.0 +HS ) Windows* 7 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2P Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification WLAN Standard IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Security Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-

bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Product Safety UL, C-UL, CB (IEC 60590) Intel Centrino Advanced-N + WiMAX 6250 and Intel Centrino Wireless-N + WiMAX 6150 Form Factor Dimensions Antenna Interface Connector Antenna Diversity Connector Interface Voltage Operating Temperature Humidity WiFi Frequency Modulation PCI Express* Half-Mini Card Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Wireless-N + WiMAX 6150 2.4 GHz (802.11b/g/n), 5 GHz (802.11a/n) Frequency band 5.15 GHz - 5.85 GHz (dependent on country) 2.4 GHz (802.11b/g/n) 2.400 - 2.4835 GHz (dependent on country) Modulation Wireless Medium Channels IEEE 802.11n Data Rates BPSK, QPSK, 16 QAM, 64 QAM 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. Intel Centrino Wireless-N + WiMAX 6150 CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) MIMO Configuration: 1X2 Rx: 300, 270, 243, 240, 180 Mbps Rx/Tx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps Intel Centrino Advanced-N + WiMAX 6250 MIMO Configuration: 2X2 Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Cisco Compatible Extensions, v4.0 Intel Centrino Wireless-N + WiMAX 6150:

IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d Intel Centrino Advanced-N + WiMAX 6250:

802.11a, IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-

bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA UL, C-UL, CB (IEC 60590) Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) 802.16e-2005 Corrigenda 2 (D4) Intel Centrino Wireless-N + WiMAX 6150:

Mobile WiMAX release 1, Wave II. Supports 3A and 1A/B profiles IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates General Operating Systems Wi-Fi Alliance*

certification Cisco Compatible Extensions certification IEEE Feature Sets Architecture Security Product Safety WiMAX General Operating Systems Standard Compliance WiMAX System Profile Feature set Intel Centrino Advanced-N + WiMAX 6250:

Mobile WiMAX release 1, Wave II. Supports 3A, 5A/C, 1A/B, and 5BL profiles Key Management Protocol (PKMv2) 128-bit CCMP (Counter-Mode/CBC-MAC) based on AES encryption Security Encryption WiMAX Frequency band Intel Centrino Wireless-N + WiMAX 6150: 2.3-2.4 GHz / 2.496-2.690 GHz Modulation Wireless Medium WiMAX Network Release Feature set Rate Performance RF Transmitter Output Power Intel Centrino Advanced-N + WiMAX 6250: 2.3-2.4 GHz / 2.496-2.690 GHz / 3.4-3.8 GHz UL - QPSK, 16 QAM Scalable OFDMA (SOFDMA): 512 and 1024 FFT Intel Centrino Wireless-N + WiMAX 6150:

Channel bandwidths: 5 and 10 MHz Intel Centrino Advanced-N + WiMAX 6250:

Channel bandwidths: 5, 7, 8.75 and 10 MHz DL - QPSK, 16 QAM, 64 QAM Duplex mode: TDD operations sub-carrier permutation: PUSC SPWG/NWG Release 1.5 Intel Centrino Wireless-N + WiMAX 6150:

Up to 10 Mbps DL and 4 Mbps UL @ peak rate

(OTA performance, 10MHz channel) Intel Centrino Advanced-N + WiMAX 6250:

Up to 20 Mbps DL and 6 Mbps UL @ peak rate

(OTA performance, 10MHz channel) Compliance with Power class 2 Intel Centrino Advanced-N 6200, Intel Centrino Advanced-N 6205 and Intel Centrino Ultimate-N 6300 Form Factor Intel Centrino Advanced-N 6200, Intel Centrino Ultimate-N 6300:

PCI Express* Full-Mini Card and Half-Mini Card. Dimensions Intel Centrino Advanced-N 6205: PCI Express* Half-Mini Card. Full-Mini Card: Width 2.00 in x Length 1.18 in x Height 0.18 in (50.95 mm x 30 mm x 4.5 mm) Antenna Interface Connector Antenna Diversity Connector Interface Voltage Operating Temperature Humidity Frequency Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) Modulation Frequency band 5.15 GHz - 5.85 GHz (dependent on country) Modulation Wireless Medium Channels IEEE 802.11n Data Rates BPSK, QPSK, 16 QAM, 64 QAM 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) All channels as defined by the relevant specification and country rules. Intel Centrino Ultimate-N 6300:

2.400 - 2.4835 GHz (dependent on country) CCK, DQPSK, DBPSK 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Tx/Rx: 450, 405, 360, 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps Intel Centrino Advanced-N 6200, Intel Centrino Advanced-N 6205:

IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates General Operating Systems Wi-Fi Alliance*

certification Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification WLAN Standard IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Security Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-

bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA UL, C-UL, CB (IEC 60590) Product Safety Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Important Information Safety Information Third Party Software Notices Safety Information It is important that you read the safety information regarding your WiFi adapter. Please see the User's Guide for safety and regulatory notices. Third Party Software Notices Portions of Intel PROSet/Wireless WiFi Connection Utility include software under the following terms:

OpenSSL License Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-

core@openssl.org. 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscape's SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"

The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related. 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson

(tjh@cryptsoft.com)"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS:' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution license [including the GNU Public License.]

zlib.h -- interface of the 'zlib' general purpose compression library, version 1.2.3, July 18th, 2005 Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly jloup@gzip.org Mark Adler madler@alumni.caltech.edu Adapter Driver Portions of the driver include software under the following terms:

WPA Supplicant Copyright (c) 2003-2007, Jouni Malinen <jkmaline@cc.hut.fi> and contributors. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of Jouni Malinen nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. __________ Copyright (c) 2001, Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK. All rights reserved. LICENSE TERMS The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided that:

1. Distributions of this source code include the above copyright notice, this list of conditions and the following disclaimer;

2. distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other associated materials;

3. the copyright holder's name is not used to endorse products built using this software without specific written permission. DISCLAIMER This software is provided 'as is' with no explicit or implied warranties in respect of its properties, including, but not limited to, correctness and fitness for purpose. Issue Date: 29/07/2002 This file contains the definitions required to use AES (Rijndael) in C. Portions Licensed from Devicescape Software, Inc. Intel PROSet/Wireless WiFi Connection Utility contains software licensed from Devicescape Software, Inc. Copyright (c) 2004 - 2008 Devicescape Software, Inc. All rights reserved.

"Odd Button" Artistic License Portions of this software contain the standard version of "Odd Button" licensed under the Artistic License. The source code for "Odd Button" may be found online at http://sourceforge.net/projects/oddbutton. Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Customer Support Intel support is available online or by telephone. Available services include the most up-to-date product information, installation instructions about specific products, and troubleshooting tips. Online Support Technical Support: http://www.intel.com/support Network Product Support: http://www.intel.com/network Corporate Web Site: http://www.intel.com Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Warranty Product Warranty Information One-Year Limited Hardware Warranty Limited Warranty In this warranty statement, the term "Product" applies to the wireless adapters listed in Specifications. Intel warrants to the purchaser of the Product that the Product, if properly used and installed, will be free from defects in material and workmanship and will substantially conform to Intels publicly available specifications for the Product for a period of one (1) year beginning on the date the Product was purchased in its original sealed packaging. SOFTWARE OF ANY KIND DELIVERED WITH OR AS PART OF THE PRODUCT IS EXPRESSLY PROVIDED "AS IS", SPECIFICALLY EXCLUDING ALL OTHER WARRANTIES, EXPRESS, IMPLIED (INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE), provided however, that Intel warrants that the media on which the software is furnished will be free from defects for a period of ninety (90) days from the date of delivery. If such a defect appears within the warranty period, you may return the defective media to Intel for replacement or alternative delivery of the software at Intel's discretion and without charge. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the software. If the Product which is the subject of this Limited Warranty fails during the warranty period for reasons covered by this Limited Warranty, Intel, at its option, will:

REPAIR the Product by means of hardware and/or software; OR REPLACE the Product with another product, OR, if Intel is unable to repair or replace the Product, REFUND the then-current Intel price for the Product at the time a claim for warranty service is made to Intel under this Limited Warranty. THIS LIMITED WARRANTY, AND ANY IMPLIED WARRANTIES THAT MAY EXIST UNDER APPLICABLE STATE, NATIONAL, PROVINCIAL OR LOCAL LAW, APPLY ONLY TO YOU AS THE ORIGINAL PURCHASER OF THE PRODUCT. Extent of Limited Warranty Intel does not warrant that the Product, whether purchased stand-alone or integrated with other products, including without limitation, semi-conductor components, will be free from design defects or errors known as

"errata." Current characterized errata are available upon request. Further, this Limited Warranty does NOT cover:

(i) any costs associated with the replacement or repair of the Product, including labor, installation or other costs incurred by you, and in particular, any costs relating to the removal or replacement of any Product soldered or otherwise permanently affixed to any printed circuit board or integrated with other products; (ii) damage to the Product due to external causes, including accident, problems with electrical power, abnormal, mechanical or environmental conditions, usage not in accordance with product instructions, misuse, neglect, accident, abuse, alteration, repair, improper or unauthorized installation or improper testing, or (iii) any Product which has been modified or operated outside of Intels publicly available specifications or where the original product identification markings (trademark or serial number) have been removed, altered or obliterated from the Product; or (iv) issues resulting from modification (other than by Intel) of software products provided or included in the Product, (v) incorporation of software products, other than those software products provided or included in the Product by Intel, or (vi) failure to apply Intel-supplied modifications or corrections to any software provided with or included in the Product. How to Obtain Warranty Service To obtain warranty service for the Product, you may contact your original place of purchase in accordance with its instructions or you may contact Intel. To request warranty service from Intel, you must contact the Intel Customer Support ("ICS") center in your region (http://www.intel.com/support/wireless/) within the warranty period during normal business hours (local time), excluding holidays and return the Product to the designated ICS center. Please be prepared to provide: (1) your name, mailing address, email address, telephone numbers and, in the USA, valid credit card information; (2) proof of purchase; (3) model name and product identification number found on the Product; and (4) an explanation of the problem. The Customer Service Representative may need additional information from you depending on the nature of the problem. Upon ICS's verification that the Product is eligible for warranty service, you will be issued a Return Material Authorization ("RMA") number and provided with instructions for returning the Product to the designated ICS center. When you return the Product to the ICS center, you must include the RMA number on the outside of the package. Intel will not accept any returned Product without an RMA number, or that has an invalid RMA number, on the package. You must deliver the returned Product to the designated ICS center in the original or equivalent packaging, with shipping charges pre-

paid (within the USA), and assume the risk of damage or loss during shipment. Intel may elect to repair or replace the Product with either a new or reconditioned Product or components, as Intel deems appropriate. The repaired or replaced product will be shipped to you at the expense of Intel within a reasonable period of time after receipt of the returned Product by ICS. The returned Product shall become Intels property on receipt by ICS. The replacement product is warranted under this written warranty and is subject to the same limitations of liability and exclusions for ninety (90) days or the remainder of the original warranty period, whichever is longer. If Intel replaces the Product, the Limited Warranty period for the replacement Product is not extended. WARRANTY LIMITATIONS AND EXCLUSIONS THIS WARRANTY REPLACES ALL OTHER WARRANTIES FOR THE PRODUCT AND INTEL DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, COURSE OF DEALING AND USAGE OF TRADE. Some states (or jurisdictions) do not allow the exclusion of implied warranties so this limitation may not apply to you. ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD. Some states (or jurisdictions) do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. LIMITATIONS OF LIABILITY INTELS RESPONSIBILITY UNDER THIS OR ANY OTHER WARRANTY, IMPLIED OR EXPRESS, IS LIMITED TO REPAIR, REPLACEMENT OR REFUND, AS SET FORTH ABOVE. THESE REMEDIES ARE THE SOLE AND EXCLUSIVE REMEDIES FOR ANY BREACH OF WARRANTY. TO THE MAXIMUM EXTENT PERMITTED BY LAW, INTEL IS NOT RESPONSIBLE FOR ANY DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY (INCLUDING WITHOUT LIMITATION, LOST PROFITS, DOWNTIME, LOSS OF GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH A SYSTEM CONTAINING THE PRODUCT), EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states (or jurisdictions) do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE OR JURISDICTION. ANY AND ALL DISPUTES ARISING UNDER OR RELATED TO THIS LIMITED WARRANTY SHALL BE ADJUDICATED IN THE FOLLOWING FORUMS AND GOVERNED BY THE FOLLOWING LAWS: FOR THE UNITED STATES OF AMERICA, CANADA, NORTH AMERICA AND SOUTH AMERICA, THE FORUM SHALL BE SANTA CLARA, CALIFORNIA, USA AND THE APPLICABLE LAW SHALL BE THAT OF THE STATE OF DELAWARE. FOR THE ASIA PACIFIC REGION (EXCEPT FOR MAINLAND CHINA), THE FORUM SHALL BE SINGAPORE AND THE APPLICABLE LAW SHALL BE THAT OF SINGAPORE. FOR EUROPE AND THE REST OF THE WORLD, THE FORUM SHALL BE LONDON AND THE APPLICABLE LAW SHALL BE THAT OF ENGLAND AND WALES IN THE EVENT OF ANY CONFLICT BETWEEN THE ENGLISH LANGUAGE VERSION AND ANY OTHER TRANSLATED VERSION(S)OF THIS LIMITED WARRANTY

(WITH THE EXCEPTION OF THE SIMPLIFIED CHINESE VERSION), THE ENGLISH LANGUAGE VERSION SHALL CONTROL. IMPORTANT! UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS SOLD HEREUNDER ARE NOT DESIGNED, OR INTENDED FOR USE IN ANY MEDICAL, LIFE SAVING OR LIFE SUSTAINING SYSTEMS, TRANSPORTATION SYSTEMS, NUCLEAR SYSTEMS, OR FOR ANY OTHER MISSION CRITICAL APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. WEEE Back to Top Back to Contents Trademarks and Disclaimers Back to Contents Glossary of Terms Term 802.11 802.11a 802.11b 802.11g 802.11n 802.1X AAA Server Access Point

(AP) Ad Hoc Network AES-CCMP Definition The 802.11 standard refers to a family of specifications developed by the IEEE for wireless LAN technology. The 802.11 specifies an over-the-air interface between a wireless client and a base station or between two wireless clients and provides 1 or 2 Mbps transmission in the 2.4 GHz band using either frequency hopping spread spectrum (FHSS) or direct sequence spread spectrum (DSSS). The 802.11a standard specifies a maximum data transfer rate of 54 Mbps and an operating frequency of 5 GHz. The 802.11a standard uses the Orthogonal Frequency Division Multiplexing

(OFDM) transmission method. Additionally, the 802.11a standard supports 802.11 features such as WEP encryption for security. 802.11b is an extension to 802.11 that applies to wireless networks and provides 11 Mbps transmission (with a fallback to 5.5, 2 and 1 Mbps) in the 2.4 GHz band. 802.11b uses only DSSS. Throughput data rate 5+ Mbps in the 2.4 GHz band. The 802.11g standard specifies a maximum data transfer rate of 54 Mbps, an operating frequency of 2.4GHz, and WEP encryption for security. 802.11g networks are also referred to as Wi-Fi* networks. A task group of the IEEE 802.11 committee has defined a new draft specification that provides for increased throughput speeds of up to 540 Mbps. The specification provides for Multiple-

Input-Multiple-Output (MIMO) technology, or using multiple receivers and multiple transmitters in both the client and access point, to achieve improved performance. 802.1X is the IEEE Standard for Port-Based Network Access Control. This is used in conjunction with EAP methods to provide access control to wired and wireless networks. Authentication, Authorization and Accounting Server. A system to control access to computer resources and track user activity. A device that connects wireless devices to another network. For example, a wireless LAN, Internet modem or others. A communication configuration in which every computer has the same capabilities, and any computer can initiate a communication session. Also known as a peer-to-peer network, a device to device network or a computer-to-computer network. Advanced Encryption Standard - Counter CBC-MAC Protocol is the new method for privacy protection of wireless transmissions specified in the IEEE 802.11i standard. AES-CCMP provides a stronger encryption method than TKIP. The AES algorithm is capable of using cryptographic keys of 128, 192, and 256 bits to encrypt and decrypt data in 128-bit blocks. AES-CCMP uses the AES block cipher, but restricts the key length to 128 bits. AES-CCMP incorporates two sophisticated cryptographic techniques (counter mode and CBC-MAC) to provide improved security between the mobile client and the access point. BER Available network Authentication Verifies the identity of a user logging onto a network. Passwords, digital certificates, smart cards and biometrics are used to prove the identity of the client to the network. Passwords and digital certificates are also used to identify the network to the client. One of the networks listed under Available networks on the Wireless Networks tab of the Wireless Network Connection Properties (Windows* XP environment). Any wireless network that is broadcasting and is within receiving range of the WiFi adapter appears on the list. Bit Error Rate. The ratio of errors to the total number of bits being sent in a data transmission from one location to another. The total number of bits (ones and zeros) per second that a network connection can support. Note that this bit rate will vary, under software control, with different signal path conditions. Broadcast SSID Used to allow an access point to respond to clients on a wireless network by sending probes. BSSID A unique identifier for each wireless client on a wireless network. The Basic Service Set Identifier (BSSID) is the Ethernet MAC address of each adapter on the network. Bit Rate CA (Certificate Authority) CCX (Cisco Compatible eXtension) Certificate CKIP A corporate certification authority implemented on a server. In addition, Internet Explorer's certificate can import a certificate from a file. A trusted CA certificate is stored in the root store. Cisco Compatible Extensions Program ensures that devices used on Cisco wireless LAN infrastructure meet the security, management and roaming requirements. Used for client authentication. A certificate is registered on the authentication server (for example, RADIUS server) and used by the authenticator. Cisco Key Integrity Protocol (CKIP) is a Cisco proprietary security protocol for encryption in 802.11 media. CKIP uses a key message integrity check and message sequence number to improve 802.11 security in infrastructure mode. CKIP is Cisco's version of TKIP. Client computer The computer that gets its Internet connection by sharing either the host computer's connection DSSS EAP EAP-AKA EAP-FAST EAP-GTC EAP-OTP EAP-SIM or the access point's connection. Direct Sequence Spread Spectrum. Technology used in radio transmission. Incompatible with FHSS. Short for Extensible Authentication Protocol, EAP sits inside of Point-to-Point Protocol's (PPP) authentication protocol and provides a generalized framework for several different authentication methods. EAP is supposed to head off proprietary authentication systems and let everything from passwords to challenge-response tokens and public-key infrastructure certificates all work smoothly. EAP-AKA (Extensible Authentication Protocol Method for UMTS Authentication and Key Agreement) is an EAP mechanism for authentication and session key distribution, using the Universal Mobile Telecommunications System (UMTS) Subscriber Identity Module (USIM). The USIM card is a special smart card used with cellular networks to validate a given user with the network. EAP-FAST, like EAP-TTLS and PEAP, uses tunneling to protect traffic. The main difference is that EAP-FAST does not use certificates to authenticate. Provisioning in EAP-FAST is negotiated solely by the client as the first communication exchange when EAP-FAST is requested from the server. If the client does not have a pre-shared secret Protected Access Credential (PAC), it can request to initiate a provisioning EAP-FAST exchange to dynamically obtain one from the server. EAP-FAST documents two methods to deliver the PAC: manual delivery through an out-of-band secure mechanism, and automatic provisioning. Manual delivery mechanisms can be any delivery mechanism that the administrator of the network feels is sufficiently secure for their network. Automatic provisioning establishes an encrypted tunnel to protect the authentication of the client and the delivery of the PAC to the client. This mechanism, while not as secure as a manual method may be, is more secure than the authentication method used in LEAP. The EAP-FAST method can be divided into two parts: provisioning, and authentication. The provisioning phase involves the initial delivery of the PAC to the client. This phase only needs to be performed once per client and user. The EAP-GTC (Generic Token Card) is similar to the EAP-OTP except with hardware token cards. The request contains a displayable message, and the response contains the string read from the hardware token card. EAP-OTP (One-Time Password) is similar to MD5, except it uses the OTP as the response. The request contains a displayable message. The OTP method is defined in RFC 2289. Extensible Authentication Protocol-Subscriber Identity Module (EAP-SIM) authentication can be used with:

Network Authentication types: Open, Shared, and WPA*-Enterprise, WPA2*-Enterprise. Data Encryption types: None, WEP and CKIP. EAP-TLS EAP-TTLS Encryption FHSS A SIM card is a special smart card that is used by Global System for Mobile Communications

(GSM) based digital cellular networks. The SIM card is used to validate your credentials with the network A type of authentication method that uses EAP and a security protocol called the Transport Layer Security (TLS). EAP-TLS uses certificates that use passwords. EAP-TLS authentication supports dynamic WEP key management. A type of authentication method that uses EAP and Tunneled Transport Layer Security (TTLS). EAP-TTLS uses a combination of certificates and another security method such as passwords. Scrambling data so that only the authorized recipient can read it. Usually a key is needed to interpret the data. Frequency-Hop Spread Spectrum. Technology used in radio transmission. Incompatible with DSSS. A capability that allows a number of people to view, modify, and print the same file(s) from different computers. The threshold at which the wireless adapter breaks the packet into multiple frames. This determines the packet size and affects the throughput of the transmission. A unit of frequency equal to 1,000,000,000 cycles per second. File and printer sharing Fragmentation threshold GHz

(Gigahertz) Host computer The computer that is directly connected to the Internet via a modem or network adapter. Infrastructure network A wireless network centered around an access point. In this environment, the access point not only provides communication with the wired network, but also mediates wireless network traffic in the immediate neighborhood. Institute of Electrical and Electronics Engineers (IEEE) is an organization involved in defining computing and communications standards. The address of a computer that is attached to a network. Part of the address designates which network the computer is on, and the other part represents the host identification. IEEE A high-speed, low-error data network covering a relatively small geographic area. A version of Extensible Authentication Protocol (EAP). LEAP is a proprietary extensible authentication protocol developed by Cisco that provides a challenge-response authentication mechanism and dynamic key assignment. A hardwired address applied at the factory. It uniquely identifies network hardware, such as a wireless adapter, on a LAN or WAN. Internet Protocol (IP) address LAN (Local Area Network) LEAP (Light Extensible Authentication Protocol) MAC (Media Access Control) Address Mbps

(Megabits-per-

second) MHz

(Megahertz) MIC (Michael) Message Integrity Check (commonly called Michael). MS-CHAP Transmission speed of 1,000,000 bits per second. A unit of frequency equal to 1,000,000 cycles per second. An EAP mechanism used by the client. Microsoft Challenge Authentication Protocol (MS-CHAP) Version 2, is used over an encrypted channel to enable server validation. The challenge and response packets are sent over a non-exposed TLS encrypted channel. ns(Nanosecond) 1 billionth (1/1,000,000,000) of a second. OFDM Open authentication PEAP Orthogonal Frequency Division Multiplexing. Allows any device network access. If encryption is not enabled on the network, any device that knows the Service Set Identifier (SSID) of the access point can gain access to the network. Protected Extensible Authentication Protocol (PEAP) is an Internet Engineering Task Force (IETF) draft protocol sponsored by Microsoft, Cisco, and RSA Security. PEAP creates an encrypted tunnel similar to the tunnel used in secure web pages (SSL). Inside the encrypted tunnel, a number of other EAP authentication methods can be used to perform client authentication. PEAP requires a TLS certificate on the RADIUS server, but unlike EAP-TLS there is no requirement to have a certificate on the client. PEAP has not been ratified by the IETF. The IETF is currently comparing PEAP and TTLS (Tunneled TLS) to determine an authentication standard for 802.1X authentication in 802.11 wireless systems. PEAP is an authentication type designed to take advantage of server-side EAP-Transport Layer Security (EAP-TLS) and to support various authentication methods, including user passwords and one-time passwords, and Generic Token Cards. A wireless network structure that allows wireless clients to communicate directly with each other without using an access point. The state in which the radio is periodically powered down to conserve power. When the portable computer is in Power Save mode, received packets are stored in the access point until the wireless adapter wakes up. One of the networks that has been configured. Such networks are listed under Preferred networks on the Wireless Networks tab of the Wireless Network Connection Properties

(Windows* XP environment). RADIUS is an authentication and accounting system that verifies user's credentials and grants access to requested resources. The international unit for measuring frequency is Hertz (Hz), which is equivalent to the older unit of cycles per second. One MegaHertz (MHz) is one million Hertz. One GigaHertz (GHz) is one billion Hertz. For reference: the standard US electrical power frequency is 60 Hz, the AM broadcast radio frequency band is 0.55 -1.6 MHz, the FM broadcast radio frequency band is 88-

108 MHz, and microwave ovens typically operate at 2.45 GHz. Movement of a wireless node between two micro cells. Roaming usually occurs in infrastructure networks built around multiple access points. Current wireless network roaming is only supported in the same subnet of a network. The number of frames in the data packet at or above which an RTS/CTS (request to send/clear to send) handshake is turned on before the packet is sent. The default value is 2347. An encryption key known only to the receiver and sender of data. This is also referred to as a pre-shared key. A SIM card is used to validate credentials with the network. A SIM card is a special smart card used by GSM-based digital cellular networks. Silent Mode Access Points or Wireless Routers have been configured to not broadcast the SSID for the wireless network. This makes it necessary to know the SSID in order to configure the wireless profile to connect to the access point or wireless router. Peer-to-Peer mode Power save mode Preferred network RADIUS

(Remote Authentication Dial-In User Service) RF (Radio Frequency) Roaming RTS threshold Shared key SIM

(Subscriber Identity Module) Silent mode Single Sign On Single Sign On feature set allows the 802.1X credentials to match your Windows log on user SSID (Service Set Identifier) stealth TKIP (Temporal Key Integrity name and password credentials for wireless network connections. SSID or network name is a value that controls access to a wireless network. The SSID for your wireless network card must match the SSID for any access point that you want to connect with. If the value does not match, you are not granted access to the network. Each SSID may be up to 32 alphanumeric characters long and is case-sensitive. A stealth access point is one that has the capability and is configured to not broadcast its SSID. This is the WiFi network name that appears when a DMU (Device Management Utility, such as Intel PROSet/Wireless WiFi Connection Utility) scans for available wireless networks. Although this can enhance wireless network security, it is commonly considered a weak security feature. To connect to a stealth access point, a user must specifically know the SSID and configure their DMU accordingly. The feature is not a part of the 802.11 specification, and is known by differing names by various vendors: closed mode, private network, SSID broadcasting. Temporal Key Integrity protocol improves data encryption. Wi-Fi Protected Access* uses its TKIP. TKIP provides important data encryption enhancements including a re-keying method. Protocol) TLS (Transport Layer Security) TTLS (Tunneled Transport Layer Security) WEP (Wired Equivalent Privacy) WEP Key Wi-Fi*

(Wireless Fidelity) WiMAX TKIP is part of the IEEE 802.11i encryption standard for wireless networks. TKIP is the next generation of WEP, the Wired Equivalency Protocol, which is used to secure 802.11 wireless networks. TKIP provides per packet key mixing, a message integrity check and a re-keying mechanism, thus fixing the flaws of WEP. A type of authentication method using the Extensible Authentication Protocol (EAP) and a security protocol called the Transport Layer Security (TLS). EAP-TLS uses certificates which use passwords. EAP-TLS authentication supports dynamic WEP key management. The TLS protocol is intended to secure and authenticate communications across a public network through data encryption. The TLS Handshake Protocol allows the server and client to provide mutual authentication and to negotiate an encryption algorithm and cryptographic keys before data is transmitted. These settings define the protocol and the credentials used to authenticate a user. In TTLS, the client uses EAP-TLS to validate the server and create a TLS-encrypted channel between the client and server. The client can use another authentication protocol. Typically password-based protocols challenge over this encrypted channel to enable server validation. The challenge and response packets are sent over a non-exposed TLS encrypted channel. TTLS implementations today support all methods defined by EAP, as well as several older methods (CHAP, PAP, MS-

CHAP and MS-CHAP-V2). TTLS can easily be extended to work with new protocols by defining new attributes to support new protocols. Wired Equivalent Privacy, 64- and 128-bit (64-bit is sometimes referred to as 40-bit). This is a low-level encryption technique designed to give the user about the same amount of privacy that he would expect from a LAN. WEP is a security protocol for wireless local area networks

(WLANs) defined in the 802.11b standard. WEP is designed to provide the same level of security as that of a wired LAN. WEP aims to provide security by data over radio waves so that it is protected as it is transmitted from one end point to another. Either a pass phrase or hexadecimal key. The pass phrase must be 5 ASCII characters for 64-bit WEP or 13 ASCII characters for 128-bit WEP. For pass phrases, 0-9, a-z, A-Z, and ~!@#$%^&*()_+|`-={}|[]\:";'<>?,./ are all valid characters. The hex key must be 10 hexadecimal characters (0-9, A-F) for 64-bit WEP or 26 hexadecimal characters (0-9, A-F) for 128-bit WEP. Is meant to be used generically when referring of any type to 802.11 network, whether 802.11b, 802.11a, or dual-band. WiMAX, the Worldwide Interoperability for Microwave Access, is a telecommunications technology aimed at providing wireless data over long distances in a variety of ways, from point-

to-point links to full mobile cellular type access. It is based on the IEEE 802.16 standard. The name WiMAX was created by the WiMAX Forum, which was formed in June 2001 to promote conformance and interoperability of the standard. The forum describes WiMAX as "a standards-

based technology enabling the delivery of last mile wireless broadband access as an alternative to cable and DSL."

Wireless router A stand-alone wireless hub that allows any computer that has a wireless network adapter to communicate with another computer within the same network and to connect to the Internet. A type of local-area network that uses high-frequency radio waves rather than wires to communicate between nodes. This is a security enhancement that strongly increases the level of data protection and access control to a wireless network. WPA is an interim standard that will be replaced with the IEEE's 802.11i standard upon its completion. WPA consists of RC4 and TKIP and provides support for BSS (Infrastructure) mode only. WPA and WPA2 are compatible. This is the second generation of WPA that complies with the IEEE TGi specification. WPA2 consists of AES encryption, pre-authentication and PMKID caching. It provides support for BSS

(Infrastructure) mode and IBSS (ad hoc) mode. WPA and WPA2 are compatible. WPA2* (Wi-Fi Protected Access 2) WPA-Enterprise Wi-Fi Protected Access-Enterprise applies to corporate users. A new standards-based, interoperable security technology for wireless LAN (subset of IEEE 802.11i draft standard) that encrypts data sent over radio waves. WPA is a Wi-Fi standard that was designed to improve WLAN (Wireless Local-Area Network) WPA* (Wi-Fi Protected Access) upon the security features of WEP as follows:

Improved data encryption through the temporal key integrity protocol (TKIP). TKIP uses a hashing algorithm to scramble the encryption keys and adds an integrity-checking feature to ensure that the keys have not been tampered with. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer's hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA is an interim standard that will be replaced with the IEEE's 802.11i standard upon its completion. WPA-Personal Wi-Fi Protected Access-Personal provides a level of security in the small network or home WPA-PSK (Wi-

Fi Protected-

Access Pre-

Shared Key) environment. WPA-PSK mode does not use an authentication server. It can be used with the data encryption types WEP or TKIP. WPA-PSK requires configuration of a pre-shared key (PSK). You must enter a pass phrase or 64 hex characters for a pre-shared key of length 256-bits. The data encryption key is derived from the PSK. Back to Top Back to Contents Trademarks and Disclaimers

Impedance Plot for D2600V2 SN: 1006 MHz 2600 Cal. () 47.3 Measured () 51.682 with Body TSL at Return Loss Plot for D1800V2 SN: 294 MHz 2600 Cal. (dB) Measured (dB)

-27.5

-26.614 with Body TSL at Page 1 of 1 Delta 9.26 Delta

-3.22

Impedance Plot for D5GHzV2 SN: 1075 with Body TSL at MHz 5000 5200 5500 5800 Cal. () 49 51.9 52.5 55.3 Measured () 48.9 51.6 48.5 52.4 Delta 0.1 0.3 4 2.9 Page 1 of 2 Return Loss Plot for D5GHzV2 SN: 1075 with Body TSL at MHz 5000 5200 5500 5800 Cal. (dB) Measured (dB)

-21.52

-21.92

-26.46

-24.81 Delta 13.26

-16.02

-16.00

-3.84

-19

-26.1

-31.5

-25.8 Page 2 of 2

a 8 Cr) FFE a Z Z Z zg Z Z Z 3

a a e SVY8B 2 z 6 g OEUOOITEEELDEGE Vdd LE

\ Z ae C0CCG C000 A a? s i : : 2 @

D958 Pi ecu hen are located under the customer removable access panel , Keyboard, Cae me) eae

REPORT NO: 10U13597-1A FCC ID: PD9622ANXHU 14. ANTENNA LOCATIONS AND SEPARATION DISTANCES DATE: March 16, 2011 Laptop Mode

(with display open at 90 to the keyboard) Aux Ant Main Ant 180 mm 95 mm 95 mm 60 mm 231.3 mm 184 mm 231.3 mm Bottom of laptop Bottom of laptop WiMAX Main Antenna 231.3 mm COMPLIANCE CERTIFICATION SERVICES (UL CCS) 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4031B FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. Page 35 of 37 REPORT NO: 10U13597-1A FCC ID: PD9622ANXHU DATE: March 16, 2011 Bottom Face 23.6 mm COMPLIANCE CERTIFICATION SERVICES (UL CCS) 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4031B FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. Page 36 of 37 REPORT NO: 10U13597-1A FCC ID: PD9622ANXHU 15. TEST SETUP PHOTOS DATE: March 16, 2011

(w/ 0.0 cm from the bottom of the laptop base-to-phantom) Bottom face 23.6 mm Aux Ant Main Ant Edge: Secondary Landscape (Worst-case) 2.0 mm Aux Ant Main Ant END OF REPORT COMPLIANCE CERTIFICATION SERVICES (UL CCS) 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4031B FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. Page 37 of 37