FCC ID: PD97265NG Intel Wireless-AC 7265

May 1, 2016 OEM Communication:

Transition Update to FCC New UNII Rules The devices listed below have been originally approved under FCC rule part 15.247. Based on the implementation of the rule changes from docket 13-49 these devices can no longer be manufactured, sold, imported or placed into operation after June 2, 2016. After this date these devices must comply with the new rule changes provided in docket 13-49. The Memorandum of Opinion and Order issued on March 6 allows for these devices to be updated from 15.247 to compliance with new rules 15.407(b)(4)(ii) so long as there are no hardware changes or changes to output power. Devices approved under 15.407(b)(4)(ii) may be sold until June 2, 2020. The following devices approved under 15.407(b)(4)(ii) may be marketed, sold and imported until June 2, 2020. After this date these devices must comply with the emission limits of 15.407. FCC ID: PD97265NG & PD97265NGU (Model 7265NGW) FCC ID: PD97260H & PD97260HU (Model 7260HMW) FCC ID: PD97260NG & PD97260NGU (Model 7260NGW) FCC ID: PD97260SD (Model 7260SDW) FCC ID: PD93160H & PD93160HU (Model 3160HMW) FCC ID: PD93160NG & PD93160NGU (Model 3160NGW) FCC ID: PD9PBA5001 (Model PBA5001) FCC ID: PD96235ANH and PD96235ANHU (Model 6235ANHMW) FCC ID: PD962205ANH and PD9 62205ANHU (Model 62205ANHMW) FCC ID: PD9633ANH & PD9633ANHU (Model 633ANHMW) 100 Center Point Circle Columbia, SC 29210

User Guide Product notice Software terms This guide describes features that are common to most models. Some features may not be available on your computer. Not all features are available in all editions of Windows. This computer may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows functionality. Go to http://www.microsoft.com for details. To access the latest user guide, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-screen instructions. By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund, subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. Copyright 2014 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of the Microsoft group of companies. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: August 2014 Document Part Number: 765879-001 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). iii iv Safety warning notice Processor configuration setting (select models only) IMPORTANT: Select computer models are configured with an Intel Atom E3800 processor and a Windows operating system. On these models, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. v vi Processor configuration setting (select models only) Table of contents 1 Starting right ...................................................................................................................................................... 1 Visit the HP Apps Store ........................................................................................................................ 1 Best practices ....................................................................................................................................... 1 More HP resources .............................................................................................................................. 2 2 Getting to know your computer ......................................................................................................................... 4 Locating hardware ................................................................................................................................ 4 Locating software ................................................................................................................................. 4 Identifying components ........................................................................................................................ 5 Using the action keys ......................................................................................................................... 11 Labels ................................................................................................................................................. 12 3 Connecting to a network ................................................................................................................................. 14 Connecting to a wireless network ....................................................................................................... 14 Using the wireless controls ................................................................................................ 14 Wireless button ................................................................................................. 14 Operating system controls ................................................................................ 15 Connecting to a WLAN ...................................................................................................... 15 Using HP Mobile Broadband (select models only) ............................................................ 16 Using Bluetooth wireless devices (select models only) ..................................................... 16 Connecting to a wired networkLAN (select models only) ............................................................... 16 Sharing data and drives and accessing software ............................................................................... 17 Sharing media and data across your home group network (select models only) ............................... 17 4 Enjoying entertainment features ..................................................................................................................... 19 Using a webcam (select models only) ................................................................................................ 19 Using audio ........................................................................................................................................ 19 Connecting speakers ......................................................................................................... 19 Connecting headphones .................................................................................................... 19 Connecting a microphone .................................................................................................. 20 Connecting headsets ......................................................................................................... 20 Using Beats Audio (select models only) ............................................................................ 20 Accessing Beats Audio Control Panel ............................................................... 20 Enabling and disabling Beats Audio .................................................................. 20 Using video ......................................................................................................................................... 20 Connecting video devices by using a VGA cable (select models only) ............................. 21 vii Connecting video devices using an HDMI cable (select models only) .............................. 21 Setting up HDMI audio ...................................................................................... 22 Connecting digital display devices using a DisplayPort cable (select models only) .......... 23 Connecting Miracast-compatible wireless displays (select models only) .......................... 24 5 Navigating the screen ..................................................................................................................................... 25 Using the TouchPad and touch screen gestures ............................................................................... 25 Tap ..................................................................................................................................... 25 Two-finger scroll ................................................................................................................ 25 Two-finger pinch zoom ...................................................................................................... 26 Two-finger click .................................................................................................................. 26 Right-edge swipe ............................................................................................................... 26 Left-edge swipe ................................................................................................................. 27 Top-edge swipe and bottom-edge swipe ........................................................................... 27 One-finger slide (touch screen only) .................................................................................. 27 Using a keyboard and optional mouse ............................................................................................... 28 6 Managing power ............................................................................................................................................. 29 Initiating and exiting Sleep and Hibernation ....................................................................................... 29 Manually initiating and exiting Sleep .................................................................................. 30 Manually initiating and exiting Hibernation (select models only) ....................................... 30 Setting password protection on wakeup (exiting Sleep or Hibernation) ............................ 30 Using the power meter and power settings ........................................................................................ 31 Running on battery power .................................................................................................................. 31 Factory-sealed battery (select models only) ...................................................................... 31 User-replaceable battery (select models only) .................................................................. 32 Finding battery information ................................................................................................ 32 Conserving battery power .................................................................................................. 33 Resolving a low battery level ............................................................................................. 33 Resolving a low battery level when external power is available ........................ 33 Resolving a low battery level when no power source is available ..................... 33 Resolving a low battery level when the computer cannot exit Hibernation ....... 33 Storing a user-replaceable battery (select models only) .................................................... 33 Disposing of a user-replaceable battery (select models only) ........................................... 34 Running on AC power ........................................................................................................................ 34 Troubleshooting power problems ...................................................................................... 35 Shutting down (turning off) the computer ........................................................................................... 35 7 Maintaining your computer .............................................................................................................................. 37 Improving performance ...................................................................................................................... 37 viii Using Disk Defragmenter ................................................................................................... 37 Using Disk Cleanup ........................................................................................................... 37 Updating programs and drivers .......................................................................................................... 37 Cleaning your computer ..................................................................................................................... 38 Cleaning procedures .......................................................................................................... 38 Cleaning the display .......................................................................................... 38 Cleaning the sides or cover ............................................................................... 39 Cleaning the TouchPad, keyboard, or mouse (select models only) .................. 39 Traveling with or shipping your computer ........................................................................................... 39 8 Securing your computer and information ........................................................................................................ 41 Using passwords ................................................................................................................................ 41 Setting Windows passwords .............................................................................................. 41 Setting Setup Utility (BIOS) passwords ............................................................................. 42 Using the fingerprint reader (select models only) ............................................................................... 42 Using Internet security software ......................................................................................................... 42 Using antivirus software ..................................................................................................... 43 Using firewall software ....................................................................................................... 43 Installing software updates ................................................................................................................. 43 Installing critical security updates ....................................................................................................... 43 Securing your wireless network .......................................................................................................... 44 Backing up your software applications and information ..................................................................... 44 Using an optional security cable lock ................................................................................................. 44 9 Using Setup Utility (BIOS) ............................................................................................................................... 45 Starting Setup Utility (BIOS) ............................................................................................................... 45 Updating the BIOS ............................................................................................................................. 45 Determining the BIOS version ........................................................................................... 45 Downloading a BIOS update ............................................................................................. 46 10 Using HP PC Hardware Diagnostics (UEFI) ................................................................................................. 47 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ................................................ 47 11 Backing up, restoring, and recovering .......................................................................................................... 49 Creating recovery media and backups (select models only) .............................................................. 49 Creating HP Recovery media (select models only) ........................................................... 49 Using Windows tools ......................................................................................................... 50 Restore and recover (select models only) .......................................................................................... 50 Recovering using HP Recovery Manager (select models only) ......................................... 51 What you need to know ..................................................................................... 51 ix Using the HP Recovery partition (select models only) ...................................... 52 Using HP Recovery media to recover ............................................................... 52 Changing the computer boot order ................................................................... 52 12 Specifications ................................................................................................................................................ 53 Input power ......................................................................................................................................... 53 Operating environment ....................................................................................................................... 54 13 Electrostatic Discharge ................................................................................................................................. 55 Index ................................................................................................................................................................... 56 x 1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer and about where to find additional HP resources. Visit the HP Apps Store The HP Apps Store offers a wide choice of popular games, entertainment and music apps, productivity apps, and apps exclusive to HP that you can download to the Start screen. The selection is updated regularly and includes regional content and country-specific offers. Be sure to check the HP Apps Store frequently for new and updated features. IMPORTANT: You must be connected to the Internet to access the HP Apps Store. To view and download an app:

1. 2. From the Start screen, select the Store app. Select HP picks to view all the available apps. NOTE: HP picks is available in select countries only. 3. Select the app you want to download, and then follow the on-screen instructions. When the download is complete, the app appears on the All apps screen. Best practices After you set up and register the computer, we recommend the following steps to get the most out of your smart investment:

Back up your hard drive by creating recovery media. See Backing up, restoring, and recovering on page 49. If you havent already done so, connect to a wired or wireless network. See details in Connecting to a network on page 14. Become familiar with the computer hardware and software. For more information, see Getting to know your computer on page 4 and Enjoying entertainment features on page 19. Update or purchase antivirus software. See Using antivirus software on page 43. Visit the HP Apps Store 1 More HP resources To locate resources that provide product details, how-to information, and more, use this table. Resource Setup Instructions Help and Support To access Help and Support:

From the Start screen, type help, and then from the Search window, select Help and Support. For U.S. support, go to http://www.hp.com/go/

contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/

wwcontact_us.html. Worldwide support To get support in your language, go to http://welcome.hp.com/country/us/en/

wwcontact_us.html. Safety & Comfort Guide To access this guide:

1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Select My computer, and then select User guides. or Go to http://www.hp.com/ergo. Regulatory, Safety and Environmental Notices To access this document:

1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Select My computer, and then select User guides. Limited Warranty*

To access this document:

1. From the Start screen, type support, and then select the HP Support Assistant app. or Contents Overview of computer setup and features A broad range of how-to information and troubleshooting tips Online chat with an HP technician Support telephone numbers HP service center locations Proper workstation setup Guidelines for posture and work habits that increase your comfort and decrease your risk of injury Electrical and mechanical safety information Important regulatory notices, including information about proper battery disposal Specific warranty information about this computer 2 Chapter 1 Starting right Resource Contents From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Select My computer, and then select Warranty and services. or Go to http://www.hp.com/go/orderdocuments.

*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your computer and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited Warranty in the box. For countries/regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/orderdocuments or write to:

North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address. IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/go/

contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. More HP resources 3 2 Getting to know your computer Locating hardware To find out what hardware is installed on your computer:

1. From the Start screen, type control panel, and then select Control Panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select System and Security, select System, and then click Device Manager in the left column. A list displays all the devices installed on your computer. 2. For information about system hardware components and the system BIOS version number, press fn

+esc (select models only). Locating software To find out what software is installed on your computer:

From the Start screen, click the down arrow in the lower-left corner of the screen. or From the Windows desktop, right-click the Start button, and then select Programs and Features. 4 Chapter 2 Getting to know your computer Identifying components Depending on the model, your computer may have some of the following components. To see which components are specific to your model, refer to the Setup Instructions poster provided in the computer box. Component Description AC adapter light On: The AC adapter is connected and the battery is charged. Off: The computer is using battery power. or White: The computer is connected to external power and the battery is charged from 90 to 99 percent. Amber: The computer is connected to external power and the battery is charged from 0 to 90 percent. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: The battery is fully charged. Accessory battery connector Connects an optional accessory battery. Action keys Execute frequently used system functions. Airplane mode key (also referred to as the wireless button) NOTE: On select models, the f5 action key turns the radiance backlight keyboard (also known as keyboard backlight) feature off or on. Turns the airplane mode and wireless feature on or off. NOTE: A wireless network must be set up before a wireless connection is possible. Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone. Audio-out (headphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. WARNING! To reduce the risk of personal injury, adjust the volume before using headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. NOTE: When a device is connected to a headphone jack, the computer speakers are disabled. Identifying components 5 Component Description Audio-out (headphone)/Audio-in

(microphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. NOTE: When a device is connected to the jack, the computer speakers are disabled. NOTE: Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio-in (microphone). Battery bay Battery lock Holds the battery. Locks the battery in the battery bay. Battery release latch Releases the battery. Bluetooth compartment Contains a Bluetooth device. Caps lock light DisplayPort On: Caps lock is on, which switches the keys to all capital letters. Connects an optional digital display device, such as a high-

performance monitor or projector. Docking connector Connects an optional docking device. esc key Displays system information when pressed in combination with the fn key. External monitor port Connects an external VGA monitor or projector. Fingerprint reader fn key Allows a fingerprint logon to Windows, instead of a password logon. Executes frequently used system functions when pressed in combination with the esc key, or on select models, the b key or the spacebar. 6 Chapter 2 Getting to know your computer Component Description Hard drive light HDMI port Blinking white: The hard drive is being accessed. Amber: HP 3D DriveGuard has temporarily parked the hard drive. Connects an optional video or audio device, such as a high-

definition television, any compatible digital or audio component, or a high-speed High-Definition Multimedia Interface (HDMI) device. HP Triple Bass Reflex Subwoofer Provides superior bass sound. Integrated numeric keypad Internal display switch Internal microphones Left control zone Left TouchPad button Memory card reader Mute light num lock key Optical drive Power button When num lock is on, it can be used like an external numeric keypad. Turns off the display and initiates Sleep if the display is closed while the power is on. NOTE: The internal display switch is not visible from the outside of the computer. Record sound. Textured area that allows you to perform additional gestures. Functions like the left button on an external mouse. Reads optional memory cards that enable you to store, manage, share or access information. To insert a card:

Hold the card label-side up, with connectors facing the slot, insert the card into the slot, and then push in on the card until it is firmly seated. To remove a card:

Press in on the card it until it pops out. Amber: Computer sound is off. Off: Computer sound is on. Alternates between the navigational and numeric functions on the integrated numeric keypad. Depending on your computer model, reads an optical disc or reads and writes to an optical disc. NOTE: For disc compatibility information, go to the Help and Support web page (see More HP resources on page 2). Follow the web page instructions to select your computer model. Select Drivers & Downloads, and then follow the on-

screen instructions. When the computer is off, press the button to turn on the computer. When the computer is on, press the button briefly to initiate Sleep. When the computer is in the Sleep state, press the button briefly to exit Sleep. Identifying components 7 Component Description When the computer is in Hibernation, press the button briefly to exit Hibernation. CAUTION: Pressing and holding down the power button will result in the loss of unsaved information. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button down for at least 5 seconds to turn off the computer. To learn more about your power settings, see your power options. From the Start screen, type power, select Power and sleep settings, and then select Power and sleep from the list of applications. or From the Windows desktop, right-click the Start button, and then select Power Options. Connects an AC adapter. On: The computer is on. Blinking: The computer is in the Sleep state, a power-

saving state. The computer shuts off power to the display and other components. Off: The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power. Textured area that allows you to perform additional gestures. Power connector Power light Right control zone Right TouchPad button Functions like the right button on an external mouse. RJ-45 (network) jack/status lights Connects a network cable. White: The network is connected. Amber: Activity is occurring on the network. Security cable slot Attaches an optional security cable to the computer. Service door NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Provides access to the hard drive bay, the wireless local area network (WLAN) module slot, the wireless wide area network (WWAN) module slot, and the memory module slots. 8 Chapter 2 Getting to know your computer Component Description CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact support through Help and Support. From the Start screen, type help, and then select Help and Support.

- or -

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Service door release latch Releases the service door. SIM slot Speakers TouchPad light TouchPad zone USB 2.0 charging (powered) port USB 2.0 port USB 3.0 charging (powered) port USB 3.0 port Vents Supports a wireless subscriber identity module (SIM). The SIM slot is located inside the battery bay. Produce sound. On: The TouchPad is off. Reads your finger gestures to move the pointer or activate items on the screen. NOTE: The TouchPad also supports edge-swipe gestures. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Standard USB ports will not charge all USB devices or will charge using a low current. Some USB devices require power and require you to use a powered port. NOTE: USB charging ports can also charge select models of cell phones and MP3 players, even when the computer is off. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Standard USB ports will not charge all USB devices or will charge using a low current. Some USB devices require power and require you to use a powered port. NOTE: USB charging ports can also charge select models of cell phones and MP3 players, even when the computer is off. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Enable airflow to cool internal components. Identifying components 9 Component Description Webcam NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. The number of vents varies depending on the computer model. It is normal for the internal fan to cycle on and off during routine operation. Records video and captures photographs. Some models allow you to video conference and chat online using streaming video. To use the webcam:

From the Start screen, type camera, and then select Camera from the list of applications. or From the Windows desktop, click the Start button, click All Programs to find your webcam software. Webcam light On: The webcam is in use. Windows application key Displays options for a selected object. Windows key Wireless light WLAN antennas WWAN antennas Returns you to the Start screen from an open app or the Windows desktop. NOTE: Pressing the Windows key again will return you to the previous screen. On: An integrated wireless device, such as a WLAN device and/or a Bluetooth device, is on. NOTE: On some models, the wireless light is amber when all wireless devices are off. Send and receive wireless signals to communicate with WLANs. NOTE: The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Send and receive wireless signals to communicate with WWANs. 10 Chapter 2 Getting to know your computer Component Description NOTE: The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Using the action keys Depending on the model, your computer may have the function key features as described in this table. An action key performs an assigned function. The icon on each of the action keys illustrates the assigned function for that key. To use an action key function, press and hold the key. CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. NOTE: The action key feature is enabled at the factory. You can disable this feature in Setup Utility

(BIOS). Refer to Help and Support for additional information. After you have disabled the action key feature, you can still perform each function by pressing the fn key in combination with the appropriate action key. Icon Description Opens Help and Support, which provides tutorials, information about the Windows operating system and your computer, answers to questions, and updates to your computer. Help and Support also provides automated troubleshooting tools and access to support. Decreases the screen brightness incrementally as long as you hold down the key. Increases the screen brightness incrementally as long as you hold down the key. Switches the screen image between display devices connected to the system. For example, if a monitor is connected to the computer, repeatedly pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. Turns the radiance backlight keyboard (also known as keyboard backlight) feature off or on. NOTE: To conserve battery power, turn off this feature. Using the action keys 11 Icon Description Plays the previous track of an audio CD or the previous section of a DVD or a BD. Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD. Plays the next track of an audio CD or the next section of a DVD or a BD. Stops audio or video playback of a CD, a DVD, or a BD. Decreases speaker volume incrementally while you hold down the key. Increases speaker volume incrementally while you hold down the key. Mutes or restores speaker sound. Turns the wireless feature on or off. NOTE: A wireless network must be set up before a wireless connection is possible. Turns the airplane mode and wireless feature on or off. NOTE: The airplane mode key is also referred to as the wireless button. NOTE: A wireless network must be set up before a wireless connection is possible. Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the removable service door, or on the back of the display. Service labelProvides important information to identify your computer. When contacting support, you will probably be asked for the serial number, and possibly for the product number or the model number. Locate these numbers before you contact support. Your service label will resemble one of the examples shown below. Refer to the illustration that most closely matches the service label on your computer. 12 Chapter 2 Getting to know your computer Component

(1)

(2) Serial number Product number

(3) Warranty period

(4) Model number (select models only) Microsoft Certificate of Authenticity label (select models only prior to Windows 8)Contains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. HP platforms with Windows 8 or Windows 8.x preinstalled do not have the physical label. Instead a Digital Product Key is electronically installed. NOTE: The Digital Product Key is automatically recognized and activated by Microsoft operating systems when a Windows 8 or Windows 8.x operating system is reinstalled using HP-

approved recovery methods. Regulatory label(s)Provide(s) regulatory information about the computer. Wireless certification label(s)Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. Labels 13 3 Connecting to a network Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Your computer may be equipped with one or more of the following wireless devices:

WLAN deviceConnects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point. HP Mobile Broadband ModuleGives you wireless connectivity over a wireless wide area network (WWAN), a much larger area. Mobile network operators install base stations (similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries. Bluetooth deviceCreates a personal area network (PAN) to connect to other Bluetooth-

enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close togethertypically within 10 meters (approximately 33 feet) of each other. For more information about wireless technology, the Internet, and networking, see the information and website links provided in Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Using the wireless controls You can control the wireless devices in your computer using one or more of these features:

Wireless button or wireless key (also called the airplane mode key) (referred to in this chapter as the wireless button) Operating system controls Wireless button The computer has a wireless button, one or more wireless devices, and, on select models, one or two wireless lights. All the wireless devices on your computer are enabled at the factory. If your computer has a wireless light, the wireless light is on (white) when your computer is on. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. If the wireless light is white, at least one wireless device is on. If the wireless light is off, all wireless devices are off. 14 Chapter 3 Connecting to a network NOTE: On some models, the wireless light is amber when all wireless devices are off. Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or turn off all the wireless devices simultaneously. Operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems. To use operating system controls:

1. From the Start screen, type control panel, and then select Control Panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select Network and Internet, and then select Network and Sharing Center. 2. For more information, see the information provided in Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Connecting to a WLAN To connect to a WLAN, follow these steps:

1. Be sure that the WLAN device is on. On select models, if the device is on, the wireless light is white. If the wireless light is off, press the wireless button. NOTE: On some models, the wireless light is amber when all wireless devices are off. 2. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the display to reveal the charms. Select Settings, and then click the network status icon. Select your WLAN from the list. 3. 4. 5. Click Connect. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the code, and then click Next to complete the connection. NOTE:

If no WLANs are listed, you may be out of range of a wireless router or access point. NOTE:

If you do not see the WLAN you want to connect to, from the Windows desktop, right-

click the network status icon, and then select Open Network and Sharing Center. Click Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection. Follow the on-screen instructions to complete the connection. 6. After the connection is made, place the mouse pointer over the network status icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection. Connecting to a wireless network 15 NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. Using HP Mobile Broadband (select models only) HP Mobile Broadband enables your computer to use WWANs to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a cellular phone network operator. Coverage for HP Mobile Broadband is similar to cellular phone voice coverage. When used with a mobile network operator service, HP Mobile Broadband gives you the freedom to stay connected to the Internet, send email, or connect to your corporate network whether you are on the road or outside the range of Wi-Fi hotspots. You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband service.The serial number is printed on a label located on the bottom of your computer. Some mobile network operators require the use of a subscriber identity module (SIM). A SIM contains basic information about you, such as a personal identification number (PIN), as well as network information. Some computers include a SIM that is preinstalled in the battery bay. If the SIM is not preinstalled, it may be included with the HP Mobile Broadband documents provided with your computer, or the mobile network operator may provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband documents included with your computer. Using Bluetooth wireless devices (select models only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following:

Computers (desktop, notebook) Phones (cellular, cordless, smartphone) Imaging devices (printer, camera) Audio devices (headset, speakers) Mouse Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices. For information about configuring and using Bluetooth devices, see the Bluetooth software Help. External keyboard Connecting to a wired networkLAN (select models only) Use a LAN connection if you want to connect the computer directly to a router in your home (instead of working wirelessly), or if you want to connect to an existing network at your office. Connecting to a LAN requires an 8-pin, RJ-45 (network) cable and a network jack on the computer. To connect the network cable, follow these steps:

1. Plug the network cable into the network jack (1) on the computer. 16 Chapter 3 Connecting to a network 2. Plug the other end of the network cable into a network wall jack (2) or router. If the network cable contains noise suppression circuitry (3), which prevents NOTE:

interference from TV and radio reception, orient the circuitry end of the cable toward the computer. Sharing data and drives and accessing software When your computer is part of a network, you are not limited to using only the information that is stored in your computer. Computers connected to the network can exchange software and data with each other. For more information about sharing files, folders, or drives, see the information provided in Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. NOTE: When a disc like a DVD movie or game is copy-protected, it cannot be shared. Sharing media and data across your home group network

(select models only) Use sMedio 360 software (select models only) to share media and data between the devices on your home group network. Before you can use sMedio 360, all of your computers and mobile devices must be on the same home group network and media sharing must be enabled. NOTE: For details on how to enable media sharing on additional devices, refer to the device manufacturer's instructions. 1. To set up a home group network:

From the Start screen, click the sMedio 360 app, and then click Tutorial. To enable media sharing on your computer:

2. Sharing data and drives and accessing software 17 a. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the display to reveal the charms. Select Settings, and then click the network status icon. b. c. Right-click the network you are connected to, and then select the check box to turn on sharing. 18 Chapter 3 Connecting to a network 4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like a monitor, projector, or TV, or speakers and headphones. Using a webcam (select models only) The computer has an integrated webcam that records video and captures photographs. Some models may allow you to video conference and chat online using streaming video. To start the webcam, from the Start screen, type camera, and then select Camera from the list of applications. For details about using the webcam, go to Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Using audio On your computer, or on select models using an external optical drive, you can play music CDs, download and listen to music, stream audio content from the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones. Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or to the audio-

out (headphone) jack on your computer or on a docking station. To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect high-definition speakers to the computer, see Setting up HDMI audio on page 22. Before connecting speakers, lower the volume setting. Connecting headphones WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document, from the Start screen, type support, and then select the HP Support Assistant app. You can connect wired headphones to the headphone jack or to the audio-out (headphone)/audio-in

(microphone) combo jack on your computer. To connect wireless headphones to your computer, follow the device manufacturer's instructions. Using a webcam (select models only) 19 Connecting a microphone To record audio, connect a microphone to the microphone jack on the computer. For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. Connecting headsets WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document, from the Start screen, type support, and then select the HP Support Assistant app. Headphones combined with a microphone are called headsets. You can connect wired headsets to the audio-out (headphone)/audio-in (microphone) jack on your computer. To connect wireless headsets to your computer, follow the device manufacturer's instructions. Using Beats Audio (select models only) Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a clear sound. You can experience Beats Audio through the computer's internal speakers, through external speakers connected to a USB port, or through Beats Audio headphones connected to the headphone jack. Accessing Beats Audio Control Panel Use Beats Audio Control Panel to view and manually control audio and bass settings. 1. From the Start screen, type control panel, select Control Panel, select Hardware and Sound, and then select Beats Audio Control Panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select Hardware and Sound, and then select Beats Audio Control Panel. 2. Enabling and disabling Beats Audio To enable or disable Beats Audio, press the fn key in combination with the b key. Using video Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network. To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information on using your video features, refer to Help and Support. 20 Chapter 4 Enjoying entertainment features Connecting video devices by using a VGA cable (select models only) NOTE: To connect a VGA video device to your computer, you need an VGA cable, purchased separately. To see the computer screen image on an external VGA monitor or projected for a presentation, connect a monitor or projector to the computer's VGA port. 1. Connect the VGA cable from the monitor or projector to the VGA port on the computer as shown. 2. Press f4 to alternate the screen image between 4 display states:

PC Screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Connecting video devices using an HDMI cable (select models only) NOTE: To connect an HDMI device to your computer, you need an HDMI cable, purchased separately. To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the following instructions:

1. Connect one end of the HDMI cable to the HDMI port on the computer. Using video 21 2. Connect the other end of the cable to the high-definition TV or monitor. 3. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Setting up HDMI audio HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following these steps:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. 2. On the Playback tab, select the name of the digital output device. 3. Click Set Default, and then click OK. To return the audio stream to the computer speakers:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click Playback devices. 2. On the Playback tab, click Speakers. 3. Click Set Default, and then click OK. 22 Chapter 4 Enjoying entertainment features Connecting digital display devices using a DisplayPort cable (select models only) NOTE: To connect a digital display device to your computer, you need a DisplayPort (DP-DP) cable, purchased separately. The DisplayPort connects a digital display device such as a high-performance monitor or projector. The DisplayPort delivers higher performance than the VGA external monitor port and improves digital connectivity. 1. Connect one end of the DisplayPort cable to the DisplayPort on the computer. 2. Connect the other end of the cable to the digital display device. 3. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the same screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Using video 23 Connecting Miracast-compatible wireless displays (select models only) To discover and connect to Miracast-compatible wireless displays, follow the steps below. To open Miracast:

Point to the upper-right or lower-right corner of the Start screen or the Windows desktop to display the charms, click Devices, click Project, and then follow the on-screen instructions. or On select computer models, from the Start screen, click the HP Quick Access to Miracast icon, and then follow the on-screen instructions. 24 Chapter 4 Enjoying entertainment features 5 Navigating the screen To quickly return to the Start screen, press the Windows key on a keyboard or the Windows button on a tablet. You can navigate the computer screen in the following ways:

Touch gestures Keyboard and optional mouse (purchased separately) NOTE: An external USB mouse (purchased separately) can be connected to a USB ports on the computer. Using the TouchPad and touch screen gestures The TouchPad helps you navigate the computer screen and control the pointer using simple touch gestures. To navigate the touchscreen, you can use the left and right TouchPad buttons as you would use the corresponding buttons on an external mouse. You can also customize gestures and view demonstrations of how they work. From the Start screen, type control panel, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. NOTE: Most of the gestures shown here can be used on either the TouchPad or touchscreen. TouchPad gestures are not supported in all apps. Tap Use the tap/double-tap gesture to select or open an item on the screen. Point to an item on the screen, and then tap one finger on the TouchPad zone select it. Double-

tap an item to open it. Two-finger scroll Use the two-finger scroll gesture to move up, down, or sideways on a page or image. Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or right. Using the TouchPad and touch screen gestures 25 Two-finger pinch zoom Use the two-finger pinch zoom to zoom out or in on images or text. Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers together. Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers apart. Two-finger click Use the two-finger click gesture to open the menu for an object on the screen. NOTE: The two-finger click performs the same function as right-clicking with the mouse. Place two fingers on the TouchPad zone and press down to open the options menu for the selected object. Right-edge swipe Use the right-edge swipe to reveal the charms, which let you search, share, start apps, access devices, or change settings. Gently swipe your finger inward from the right edge of the TouchPad to reveal the charms. 26 Chapter 5 Navigating the screen Left-edge swipe Use the left-edge swipe to reveal your open apps so that you can access them quickly. Gently swipe your finger inward from the left edge of the TouchPad to switch between apps. Without lifting your finger, swipe back toward the left edge to reveal all open apps. Top-edge swipe and bottom-edge swipe Use the top-edge swipe or bottom-edge swipe to display command options that allow you to customize an open app. IMPORTANT: When an app is open, the top-edge swipe varies depending on the app. Gently swipe your finger from the top edge or the bottom edge to reveal the app command options. One-finger slide (touch screen only) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. To drag, press and hold an object, and then drag the object to move it. Using the TouchPad and touch screen gestures 27 Using a keyboard and optional mouse A keyboard and optional external mouse allow you to type, select items, scroll, and perform similar functions as you do touch gestures. For details, refer to Getting to know your computer on page 4. TIP: The Windows key on a tablet allow you to quickly return to the Start screen from an open app or the Windows desktop. Press the button or key again to return to the previous screen. on a keyboard or the Windows button 28 Chapter 5 Navigating the screen 6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power only and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Initiating and exiting Sleep and Hibernation Windows has two power-saving states, Sleep and Hibernation. SleepThe Sleep state is automatically initiated after a period of inactivity. Your work is saved to memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more information, see Manually initiating and exiting Sleep on page 30. HibernationThe Hibernation state is automatically initiated if the battery reaches a critical level. In the Hibernation state, your work is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually. For more information, see Manually initiating and exiting Hibernation (select models only) on page 30. CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate the Sleep state while reading from or writing to a disc or an external media card. NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in the Sleep state or in the Hibernation state. Initiating and exiting Sleep and Hibernation 29 Manually initiating and exiting Sleep You can initiate Sleep in any of the following ways:

Close the display. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the screen to reveal the charms. Click Settings, click the Power icon, and then click Sleep. You can exit Sleep in any of the following ways:

Briefly press the power button. If the computer is closed, raise the display. Press a key on the keyboard. Tap or swipe the TouchPad. When the computer exits Sleep, the power lights turn on and your work returns to the screen. NOTE:

password before your work returns to the screen. If you have set a password to be required on exiting Sleep, you must enter your Windows Manually initiating and exiting Hibernation (select models only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. From the Start screen, type power options, and then select Power options. or From the Windows desktop, right-click the Start button, and then click Power Options. In the left pane, click Choose what the power button does. In the When I press the power button area, select Hibernate. 2. 3. Click Change Settings that are currently unavailable. 4. 5. Click Save changes. To exit Hibernation:

Briefly press the power button. When the computer exits Hibernation, the power lights turn on and your work returns to the screen. NOTE:

Windows password before your work returns to the screen. If you have set a password to be required on exiting Hibernation, you must enter your Setting password protection on wakeup (exiting Sleep or Hibernation) To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps:

1. From the Start screen, type power options, and then select Power options. or From the Windows desktop, right-click the Start button, and then click Power Options. In the left pane, click Require a password on wakeup. 2. 30 Chapter 6 Managing power 3. Click Change Settings that are currently unavailable. 4. Click Require a password (recommended). NOTE:

If you need to create a user account password or change your current user account password, click Create or change your user account password, and then follow the on-screen instructions. If you do not need to create or change a user account password, go to step 5. 5. Click Save changes. Using the power meter and power settings The power meter is located on the Windows desktop. The power meter allows you to quickly access power settings and view the remaining battery charge. To view the percentage of remaining battery charge and the current power plan, place the mouse pointer over the power meter icon. To use Power Options, click the power meter icon and select an item from the list. From the Start screen, you can also type power options, and then select Power Options. Different power meter icons indicate whether the computer is running on battery or external power. Placing the mouse pointer over the icon reveals a message if the battery has reached a low or critical battery level. Running on battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. When the computer is off and unplugged from external power, the battery in the computer slowly discharges. The computer will display a message when the battery reaches a low or critical battery level. Computer battery life varies, depending on power management settings, programs running on the computer, screen brightness, external devices connected to the computer, and other factors. Factory-sealed battery (select products only) To monitor the status of the battery, or if the battery is no longer holding a charge, run Battery Check in the HP Support Assistant app. 1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Select Battery and performance. If Battery Check indicates that your battery should be replaced, contact support. 2. The battery(ies) in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. The battery[ies] in this product cannot be easily replaced by user themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Using the power meter and power settings 31 User-replaceable battery (select models only) WARNING! To reduce potential safety issues, use only the user-replaceable battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a user-replaceable battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work or shut down the computer through Windows before removing the battery. To remove the user-replaceable battery (select models only), refer to the steps and illustration that most closely match your computer:

1. 2. Turn the computer upside down on a flat surface. Slide the battery release latch (1) to release the battery. NOTE: The battery release latch automatically returns to its original position. 3. Remove the battery from the computer (2). or 1. 2. Turn the computer upside down on a flat surface. Slide the battery release latch (1) to release the battery. NOTE: The battery release latch automatically returns to its original position. 3. Pivot the battery upward (2), and then remove it from the computer (3). Finding battery information To access battery information:

1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Select Battery and Performance. 2. 32 Chapter 6 Managing power HP Support Assistant provides the following tools and information about the battery:

Battery Check Information about battery types, specifications, life cycles, and capacity Conserving battery power To conserve battery power and maximize battery life:

Lower the brightness of the display. Select the Power saver setting in Power Options. If the computer will be unused and unplugged from external power for more than 2 weeks, remove the user-replaceable battery from the computer and store it separately in a cool, dry place. Turn off wireless devices when you are not using them. Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port. Stop, disable, or remove any external media cards that you are not using. Before you leave your work, initiate Sleep or shut down the computer. Resolving a low battery level Resolving a low battery level when external power is available Connect one of the following to the computer and to external power:

AC adapter Optional docking or expansion device Optional power adapter purchased as an accessory from HP Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation 1. Replace the discharged user-replaceable battery with a charged battery, or connect the AC adapter to the computer and to external power. Exit Hibernation by pressing the power button. 2. Storing a user-replaceable battery (select models only) CAUTION: To reduce the risk of damage to a battery, do not expose it to high temperatures for extended periods of time. If a computer will be unused and unplugged from external power for more than 2 weeks, remove the battery and store it separately in a cool, dry place to prolong the battery charge. A stored battery should be checked every 6 months. If the capacity is less than 50 percent, recharge the battery before returning it to storage. Running on battery power 33 Disposing of a user-replaceable battery (select models only) WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. See the Regulatory, Safety and Environmental Notices for proper battery disposal. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Running on AC power For information about connecting to AC power, refer to the Setup Instructions poster provided in the computer box. The computer does not use battery power when the computer is connected to AC power with an approved AC adapter or an optional docking/expansion device. WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. Connect the computer to AC power under any of the following conditions:

WARNING! Do not charge the computer battery while you are aboard aircraft. When charging or calibrating a battery When installing or modifying system software When writing information to a disc (select models only) When running Disk Defragmenter on computers with internal hard drives When performing a backup or recovery When you connect the computer to AC power:

The battery begins to charge. The screen brightness increases. The power meter icon on the Windows desktop changes appearance. When you disconnect AC power:

The computer switches to battery power. The screen brightness automatically decreases to save battery life. The power meter icon on the Windows desktop changes appearance. 34 Chapter 6 Managing power Troubleshooting power problems Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power:

The computer does not turn on. The display does not turn on. The power lights do not turn on. To test the AC adapter:

1. 2. Connect the AC adapter to the computer, and then plug it into an AC outlet. 3. Shut down the computer. Turn on the computer. If the power lights turn on, the AC adapter is working properly. If the power lights remain off, check the connection from the AC adapter to the computer and the connection from the AC adapter to the AC outlet to be sure that the connections are secure. If the connections are secure and the power lights remain off, the AC adapter is not functioning and should be replaced. Contact support for information about obtaining a replacement AC power adapter. Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions:

When you are connecting an external hardware device that does not connect to a USB or video port When the computer will be unused and disconnected from external power for an extended period Although you can turn off the computer with the power button, the recommended procedure is to use the Windows Shut down command. If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by NOTE:

briefly pressing the power button. 1. 2. Save your work and close all open programs. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the screen to reveal the charms. 3. Click Settings, click the Power icon, and then click Shut down. or Shutting down (turning off) the computer 35 Right-click the Start button in the lower-left corner of the screen, select Shut down or sign out, and then select Shut down. If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

Press ctrl+alt+delete, click the Power icon, and then select Shut Down. Press and hold the power button for at least 5 seconds. Disconnect the computer from external power. On models with a user-replaceable battery, remove the battery. 36 Chapter 6 Managing power 7 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition. This chapter explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating programs and drivers, steps to clean the computer, and tips for traveling with

(or shipping) the computer. Improving performance You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup. Using Disk Defragmenter HP recommends using Disk Defragmenter to defragment your hard drive at least once a month. NOTE:

It is not necessary to run Disk Defragmenter on solid-state drives. To run Disk Defragmenter:

1. Connect the computer to AC power. 2. 3. For additional information, access the Disk Defragmenter software Help. From the Start screen, type defragment, and then select Defragment and optimize your drives. Follow the on-screen instructions. Using Disk Cleanup Use Disk Cleanup to search the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer run more efficiently. To run Disk Cleanup:

1. From the Start screen, type disk, and then select one of the following:

Free up disk space on this PC Uninstall apps to free up disk space Free up disk space by deleting uncessary files Follow the on-screen instructions. 2. Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis. Updates can resolve issues and bring new features and options to your computer. For example, older graphics components might not work well with the most recent gaming software. Without the latest driver, you would not be getting the most out of your equipment. Go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition, register to receive automatic notifications when updates become available. Improving performance 37 If you would like to update your programs and drivers, follow these instructions:

1. From the Start screen, type support, and then select the HP Support Assistant app.

-or-

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Click Updates and tune-ups, and then click Check for HP updates now. 3. Follow the on-screen instructions. Cleaning your computer Use the following products to safely clean your computer:

Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (for example, disposable wipes, which come in a variety of brands) Alcohol-free glass-cleaning fluid Solution of water and mild soap Dry microfiber cleaning cloth or a chamois (static-free cloth without oil) Static-free cloth wipes CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are not sure that a cleaning product is safe for your computer, check the product contents to make sure that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product. Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning agents can get trapped in the scratches. Cleaning procedures Follow the procedures in this section to safely clean your computer. WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer while it is on. Turn off the computer. 1. 2. Disconnect AC power. 3. Disconnect all powered external devices. CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on any computer surface. Liquids dripped on the surface can permanently damage internal components. Cleaning the display Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that a display is dry before you close the computer. 38 Chapter 7 Maintaining your computer Cleaning the sides or cover To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously, or use an acceptable disposable wipe. NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris. Cleaning the TouchPad, keyboard, or mouse (select models only) WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. CAUTION: To prevent damage to internal components, do not allow liquids to drip between the keys. To clean the TouchPad, keyboard, or mouse, use a soft microfiber cloth or a chamois moistened with one of the cleaning solutions listed previously or use an acceptable disposable wipe. To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a can of compressed air with a straw extension. Traveling with or shipping your computer If you have to travel with or ship your computer, follow these tips to keep your equipment safe. Prepare the computer for traveling or shipping:

Back up your information to an external drive. Remove all discs and all external media cards, such as memory cards. Turn off and then disconnect all external devices. Shut down the computer. Take along a backup of your information. Keep the backup separate from the computer. When traveling by air, carry the computer as hand luggage; do not check it in with the rest of your luggage. CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you are allowed to use your computer. In-flight computer use is at the discretion of the airline. If you are shipping the computer or a drive, use suitable protective packaging and label the package FRAGILE. The use of wireless devices may be restricted in some environments. Such restrictions may apply aboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a wireless device in your computer, ask for authorization to use your computer before you turn it on. If you are traveling internationally, follow these suggestions:

Traveling with or shipping your computer 39 Check the computer-related customs regulations for each country or region on your itinerary. Check the power cord and adapter requirements for each location in which you plan to use the computer. Voltage, frequency, and plug configurations vary. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. 40 Chapter 7 Maintaining your computer 8 Securing your computer and information Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, the non-Windows Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. IMPORTANT: Some security features listed in this chapter may not be available on your computer. Using passwords A password is a group of characters that you choose to secure your computer information and to protect online transactions. Several types of passwords can be set. For example, when you set up your computer for the first time, you were asked to create a user password to secure your computer. Additional passwords can be set in Windows or in the HP Setup Utility (BIOS) that is preinstalled on your computer. You may find it helpful to use the same password for a Setup Utility (BIOS) feature and for a Windows security feature. To create and save passwords, use the following tips:

To reduce the risk of being locked out of the computer, record each password and store it in a secure place away from the computer. Do not store passwords in a file on the computer. When creating passwords, follow requirements set by the program. Change your passwords at least every 3 months. An ideal password is long and has letters, punctuation, symbols, and numbers. Before you send your computer for service, back up your files, delete confidential files, and then remove all password settings. For additional information about Windows passwords, such as screen-saver passwords:

From the Start screen, type support, and then select the HP Support Assistant app.

-or-

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Setting Windows passwords Password User password Administrator password Function Protects access to a Windows user account. Protects administrator-level access to computer contents. NOTE: This password cannot be used to access Setup Utility (BIOS) contents. Using passwords 41 Setting Setup Utility (BIOS) passwords Password Administrator password Power-on password Function Must be entered each time you access Setup Utility

(BIOS). If you forget your administrator password, you cannot access Setup Utility (BIOS). Must be entered each time you turn on or restart the computer. If you forget your power-on password, you cannot turn on or restart the computer. To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):

If you have tablet with a detachable keyboard or keyboard dock, attach it before beginning NOTE:

these steps. 1. Start Setup Utility (BIOS):

Turn on or restart the computer, quickly press esc, and then press f10. 2. Use the arrow keys to select Security, and then follow the on-screen instructions. Your changes take effect when the computer restarts. Using the fingerprint reader (select models only) Integrated fingerprint readers are available on select computer models. NOTE: For the location of the fingerprint reader on your computer, see Identifying components on page 5. To use the fingerprint reader, you must set up a user account and password on the computer and then register one or more fingerprints using HP SimplePass software. To register fingerprints with HP SimplePass:

1. Swipe a finger on the fingerprint sensor to launch HP SimplePass. or From the Start screen, type simple, and then select HP SimplePass. 2. When the HP SimplePass welcome screen is revealed, click Get Started. 3. HP SimplePass prompts you to swipe your right index finger over the sensor. 4. Swipe your finger 3 times to finish the registration. If registration is successful, a green circle appears on the corresponding finger in the illustration. 5. Repeat steps 1 through 4 to register an additional fingerprint. Using Internet security software When you use your computer to access email, a network, or the Internet, you potentially expose your computer to computer viruses, spyware, and other online threats. To help protect your computer, 42 Chapter 8 Securing your computer and information Internet security software that includes antivirus and firewall features may be preinstalled on your computer as a trial offer. To provide ongoing protection against newly discovered viruses and other security risks, security software must be kept up to date. It is strongly recommended that you upgrade the security software trial offer or purchase the software of your choice in order to fully protect your computer. Using antivirus software Computer viruses can disable programs, utilities, or the operating system, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. An antivirus program may be preinstalled on your computer. It is strongly recommended that you use the antivirus program of your choice in order to fully protect your computer. For more information about computer viruses, from the Start screen, type support, and then select the HP Support Assistant app, or from the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be software you install on your computer and/or network, or it can be a combination of both hardware and software. There are two types of firewalls to consider:

Host-based firewallsSoftware that protects only the computer it is installed on. Network-based firewallsInstalled between your DSL or cable modem and your home network to protect all the computers on the network. When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked. Installing software updates HP, Windows, and third-party software installed on your computer should be regularly updated to correct security problems and improve software performance. For more information, see Updating programs and drivers on page 37. Installing critical security updates CAUTION: Microsoft sends out alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. You can install these updates manually or automatically. To view or change the settings:

1. From the Start screen, type control panel. or Installing software updates 43 2. From the Windows desktop, right-click the Start button, and then select Control Panel. Select System and Security, select Windows Update, select Change settings, and then follow the on-screen instructions. Securing your wireless network When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and airports may not provide any security. Backing up your software applications and information Regularly back up your software applications and information to protect them from being permanently lost or damaged through a virus attack or a software or hardware failure. For more information, see Backing up, restoring, and recovering on page 49. Using an optional security cable lock A security cable lock, purchased separately, is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Security cable locks are only one of several methods that should be employed as part of a complete security solution to help maximize theft protection. The security cable slot on your computer may look slightly different from the illustration in this section. For the location of the security cable slot on your computer, see Getting to know your computer on page 4. 1. 2. 3. Loop the security cable lock around a secured object. Insert the key (1) into the security cable lock (2). Insert the security cable lock into the security cable slot on the computer (3), and then lock the security cable lock with the key. 4. Remove the key and keep it in a safe place. 44 Chapter 8 Securing your computer and information 9 Using Setup Utility (BIOS) Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory. Starting Setup Utility (BIOS) CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. NOTE:

these steps. Turn on or restart the computer, quickly press esc, and then press f10. If you have tablet with a detachable keyboard or keyboard dock, attach it before beginning Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version Start Setup Utility (BIOS) (see Starting Setup Utility (BIOS) on page 45). To determine whether available BIOS updates contain later BIOS versions than the one currently installed on the computer, you need to know the version of the system BIOS that is installed. BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing fn+esc (if you are already in Windows) or by using Setup Utility (BIOS). 1. 2. Use the arrow keys to select Main, and then make note of your BIOS version. To exit Setup Utility (BIOS):

1. Use the arrow keys to select Exit, select Exit Discarding Changes, and then press enter. 2. Select Yes. Starting Setup Utility (BIOS) 45 Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet. Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. If your computer is connected to a network, consult the network administrator before NOTE:

installing any software updates, especially system BIOS updates. 1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Click Updates and tune-ups, and then click Check for HP updates now. 3. 4. Follow the on-screen instructions. At the download area, follow these steps:

a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. If the update is more recent than your BIOS, make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. Follow the on-screen instructions to download your selection to the hard drive. If the update is more recent than your BIOS, make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. b. BIOS installation procedures vary. Follow any instructions that appear on the screen after the download is complete. If no instructions appear, follow these steps:

1. From the Start screen, type file, and then select File Explorer. or From the Windows desktop, right-click the Start button, and then select File Explorer. 2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:). 3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the update. 4. Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. 5. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. 46 Chapter 9 Using Setup Utility (BIOS) 10 Using HP PC Hardware Diagnostics

(UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components. To start HP PC Hardware Diagnostics (UEFI):

1. Turn on or restart the computer, quickly press esc, and then press f2. The BIOS searches 3 places for the diagnostic tools, in the following order:

a. Connected USB drive NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 47. b. Hard drive c. BIOS 2. When the diagnostic tool opens, use the keyboard arrow keys to select the type of diagnostic test you want to run, and then follow the on-screen instructions. NOTE:

If you need to stop a diagnostic test, press esc. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English NOTE:

only. There are two options to download HP PC Hardware Diagnostics to a USB device:

Option 1: HP PC Diagnostics homepage Provides access to the latest UEFI version 1. Go to http://hp.com/go/techcenter/pcdiags. 2. Click the UEFI Download link, and then select Run. Option 2: Support and Drivers pagesProvide downloads for a specific product for earlier and later versions 1. Go to http://www.hp.com. 2. 3. Point to Support, located at the top of the page, and then click Download Drivers. In the text box, enter the product name, and then click Go. or Click Find Now to let HP automatically detect your product. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 47 4. 5. Select your computer model, and then select your operating system. In the Diagnostic section, click HP UEFI Support Environment. or Click Download, and then select Run. 48 Chapter 10 Using HP PC Hardware Diagnostics (UEFI) 11 Backing up, restoring, and recovering This chapter provides information about the following processes. The information in the chapter is standard procedure for most models. Creating recovery media and backups Restoring and recovering your system For additional information, refer to the HP Support Assistant. From the Start screen, type support, and then select the HP Support Assistant app.

- or -

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Creating recovery media and backups (select models only) Use HP Recovery Manager after you successfully set up the computer, to create HP Recovery media. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For information on creating recovery media, see Creating HP Recovery media (select models only) on page 49. For information on the recovery options that are available using the recovery media, see Recovering using HP Recovery Manager (select models only) on page 51 Use Windows tools to create system restore points and create backups of personal information. Creating HP Recovery media (select models only) HP Recovery Manager is a software program that allows you to create recovery media after you successfully set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the original operating system and the software programs installed at the factory and then configures the settings for the programs. HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive. Only one set of HP Recovery media can be created. Handle these recovery tools carefully, and keep them in a safe place. HP Recovery Manager examines the computer and determines the required storage capacity for the blank USB flash drive or the number of blank DVD discs that will be required. To create recovery discs, your computer must have an optical drive with DVD writer capability, and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use rewritable discs such as CDRW, DVDRW, double-layer DVDRW, or BD-RE

(rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or, instead, you can use a high-quality blank USB flash drive. If your computer does not include an integrated optical drive with DVD writer capability, but you would like to create DVD recovery media, you can use an external optical drive (purchased separately) to create recovery discs, or you can obtain recovery discs for your computer from Creating recovery media and backups (select models only) 49 support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. If you use an external optical drive, it must be connected directly to a USB port on the computer; the drive cannot be connected to a USB port on an external device, such as a USB hub. Be sure that the computer is connected to AC power before you begin creating the recovery media. The creation process can take an hour or more. Do not interrupt the creation process. If necessary, you can exit the program before you have finished creating all of the recovery DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery Manager, you will be prompted to continue, and the remaining discs will be burned. From the Start screen, type recovery, and then select HP Recovery Manager. Select Recovery Media Creation, and then follow the on-screen instructions. To create HP Recovery media:

1. 2. If you ever need to recover the system, see Recovering using HP Recovery Manager (select models only) on page 51. Using Windows tools You can create system restore points and create backups of personal information using Windows tools. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. For more information and steps, see Help and Support. Restore and recover (select models only) There are several options for recovering your system. Choose the method that best matches your situation and level of expertise:

Windows offers several options for restoring from backup, refreshing the computer, and resetting the computer to its original state. For more information and steps, see Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. On select models, if you need to correct a problem with a preinstalled application or driver, use the Drivers and Applications Reinstall option of HP Recovery Manager to reinstall the individual application or driver. From the Start screen, type recovery, select HP Recovery Manager, select Drivers and Applications Reinstall, and then follow the on-screen instructions. 50 Chapter 11 Backing up, restoring, and recovering On select models, if you want to reset your computer using a minimized image, you can choose the HP Minimized Image Recovery option from the HP Recovery partition or HP Recovery media. Minimized Image Recovery installs only drivers and hardware-enabling applications. Other applications included in the image continue to be available for installation through the Drivers and Applications Reinstall option in HP Recovery Manager. For more information, see Recovering using HP Recovery Manager (select models only) on page 51. On select models, if you want to recover the computer's original factory partitioning and content, you can choose the System Recovery option from the HP Recovery partition or use the HP Recovery media that you have created. For more information, see Recovering using HP Recovery Manager (select models only) on page 51. If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 49. On select models, if you have replaced the hard drive, you can use the Factory Reset option of HP Recovery media to restore the factory image to the replacement drive. For more information, see Recovering using HP Recovery Manager (select models only) on page 51. Recovering using HP Recovery Manager (select models only) HP Recovery Manager software allows you to recover the computer to its original factory state by using the HP Recovery media that you created or by using the HP Recovery partition (select models only). If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 49. Using HP Recovery media, you can choose from one of the following recovery options:

System RecoveryReinstalls the original operating system, and then configures the settings for the programs that were installed at the factory. Minimized Image Recovery (select models only)Reinstalls the operating system and all hardware-related drivers and software, but not other software applications. Factory Reset (select models only)Restores the computer to its original factory state by deleting all information from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that was installed at the factory. The HP Recovery partition (select models only) allows System Recovery and Minimized Image Recovery. What you need to know HP Recovery Manager recovers only software that was installed at the factory. For software not provided with the computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer. IMPORTANT: Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues. HP Recovery media (select models only) must be used if the computer hard drive fails. If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 49. To use the Factory Reset option, you must use HP Recovery media (select models only). If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 49. If the HP Recovery media (select models only) does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the Restore and recover (select models only) 51 computer. You can also find contact information from the HP website. Go to http://www.hp.com/

support, select your country or region, and follow the on-screen instructions. IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before beginning recovery, back up any personal data you want to retain. Using the HP Recovery partition (select models only) The HP Recovery partition (select models only) allows you to perform a system recovery or minimized image recovery without the need for recovery discs or a recovery USB flash drive. This type of recovery can be used only if the hard drive is still working. To start HP Recovery Manager from the HP Recovery partition:

1. From the Start screen, type recovery, select Recovery Manager, and then select HP Recovery Environment. Select Troubleshoot from the boot options menu. Select Recovery Manager, and then follow the on-screen instructions. 2. 3. Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly. 1. 2. If possible, back up all personal files. Insert the HP Recovery media that you created, and then restart the computer. If the computer does not automatically restart in HP Recovery Manager, change the NOTE:

computer boot order. See Changing the computer boot order on page 52. Follow the on-screen instructions. 3. Changing the computer boot order If the computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices where the computer searches for startup information. You can specify that an optical drive or a USB flash drive should be checked first. To change the boot order:

1. 2. Restart the computer, quickly press esc, and then press f9 for boot options. 3. 4. Select the optical drive or USB flash drive you want to boot from. Follow the on-screen instructions. Insert the HP Recovery media you created. 52 Chapter 11 Backing up, restoring, and recovering 12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100240 V, 5060 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source that is supplied and approved by HP for use with this computer. The computer can operate on DC power within the following specifications. Operating voltage and current varies by platform.The voltage and current for your computer is located on the regulatory label. Input power Rating Operating voltage and current 5 V dc @ 2 A / 12 V dc @ 3 A /15 V dc @ 3 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 3.75 A /15 V dc @ 3 A 45W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 3.75 A / 12 V dc @ 3.75 A / 15 V dc @ 3 A /

20 V dc @ 2.25 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 5 A / 15 V dc @ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc @ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc @ 5 A / 20 V dc @ 4.5 A 90 W USB-C 19.5 V dc @ 2.31 A 45 W 19.5 V dc @ 3.33 A 65 W 19.5 V dc @ 4.62 A 90 W 19.5 V dc @ 6.15 A 120 W 19.5 V dc @ 6.9 A 135 W 19.5 V dc @ 7.70 A 150 W 19.5 V dc @ 10.3 A 200 W 19.5 V dc @ 11.8 A 230 W NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. NOTE: The computer operating voltage and current can be found on the system regulatory label. Input power 53 Operating environment Factor Temperature Operating Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Metric U.S. 5C to 35C

-20C to 60C 10% to 90%

5% to 95%

41F to 95F

-4F to 140F 10% to 90%

5% to 95%

Operating Nonoperating

-15 m to 3,048 m

-15 m to 12,192 m

-50 ft to 10,000 ft

-50 ft to 40,000 ft 54 Chapter 12 Specifications 13 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contactfor example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:

If removal or installation instructions direct you to unplug the computer, first be sure that it is properly grounded. Keep components in their electrostatic-safe containers until you are ready to install them. Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. Use nonmagnetic tools. Before handling components, discharge static electricity by touching an unpainted metal surface. If you remove a component, place it in an electrostatic-safe container. 55 Index A AC adapter light, identifying 5 AC adapter, testing 35 accessory battery connector, identifying 5 action keys 11 identifying 5 airplane mode key 5, 12 antivirus software, using 43 audio-in (microphone), identifying 5 audio-out (headphone), identifying 5 audio-out (headphone)/audio-in

(microphone) jack, identifying 6 B backing up software and information 44 backups 49 battery conserving power 33 discharging 33 disposing 34 factory-sealed 31 finding information 32 resolving low battery level 33 storing 33 user-replaceable 32 battery bay, identifying 6 battery information, finding 32 battery lock, identifying 6 battery power 31 battery release latch, identifying 6 battery temperature 33 bay, battery 6 Beats Audio 20 Beats Audio Control Panel 20 Beats Audio hot key 20 best practices 1 BIOS determining version 45 downloading an update 46 56 Index starting the Setup Utility 45 updating 45 Bluetooth compartment, identifying 6 Bluetooth device 14, 16 Bluetooth label 13 boot order changing 52 bottom 13 buttons left TouchPad 7 power 7 right TouchPad 8 C caps lock light, identifying 6 caring for your computer 38 cleaning your computer 38 components 5 computer, traveling 33 connecting to a WLAN 15 connector, power 8 control zone left 7 right 8 corporate WLAN connection 15 critical security updates, installing 43 D deleted files, restoring 50 Disk Cleanup software 37 Disk Defragmenter software 37 DisplayPort connecting 23 identifying 6 docking connector, identifying 6 E electrostatic discharge 55 esc key, identifying 6 external AC power, using 34 external monitor port 21 external monitor port, identifying 6 F fingerprint reader identifying 6 using 42 fingerprints, registering 42 firewall software 43 fn key, identifying 6 G getting to know your computer 4 H hard drive light, identifying 7 HDMI port connecting 21 identifying 7 HDMI, configuring audio 22 headphones, connecting 19 headsets, connecting 20 Hibernation exiting 30 initiating 30 high-definition devices, connecting 21, 23, 24 HP Apps Store, visiting 1 HP PC Hardware Diagnostics

(UEFI) downloading 47 HP Recovery Manager correcting boot problems 52 starting 52 HP Recovery media creating 49 recovery 52 HP Recovery partition recovery 52 HP resources 2 HP Triple Bass Reflex Subwoofer, identifying 7 I initiating Sleep and Hibernation 29 input power 53 installing critical security updates 43 optional security cable lock 44 integrated numeric keypad, identifying 7 internal display switch, identifying 7 internal microphones, identifying 7 Internet security software, using 42 J jacks audio-in (microphone) 5 audio-out (headphone) 5 audio-out (headphone)/audio-in

(microphone) 6 network 8 RJ-45 (network) 8 K keyboard and mouse, using 28 keys action 5 airplane mode 5, 12 esc 6 fn 6 num lock 7 Windows 10 Windows applications 10 L labels Bluetooth 13 Microsoft Certificate of Authenticity 13 regulatory 13 serial number 12 service 12 wireless certification 13 WLAN 13 latches battery release 6 service door release 9 left control zone, identifying 7 left-edge swipe TouchPad and touch screen gesture 27 lights AC adapter 5 caps lock 6 hard drive 7 mute 7 power 8 RJ-45 (network) status 8 TouchPad 9 webcam 10 wireless 10 locating information hardware 4 software 4 M maintenance Disk Cleanup 37 Disk Defragmenter 37 updating programs and drivers 37 memory card reader, identifying 7 memory card, identifying 7 microphone, connecting 20 minimized image recovery 52 minimized image, creating 51 Miracast 24 mouse, external setting preferences 25 mute light, identifying 7 N network jack, identifying 8 num lock key, identifying 7 O one-finger slide touch screen gesture 27 operating environment 54 optical drive, identifying 7 original system recovery 51 P passwords ports Setup Utility (BIOS) 42 Windows 41 DisplayPort 6 external monitor 6, 21 HDMI 7, 21, 23 Miracast 24 USB 2.0 9 USB 2.0 charging (powered) 9 USB 3.0 9 USB 3.0 (powered) charging 9 VGA 21 power AC 34 battery 31 power button identifying 7 power connector, identifying 8 power lights, identifying 8 power meter, using 31 power settings, using 31 product name and number, computer 12 public WLAN connection 15 R recover options 50 recovery discs 49, 52 HP Recovery Manager 51 media 52 starting 52 supported discs 49 system 51 USB flash drive 52 using HP Recovery media 50 recovery media creating 49 creating using HP Recovery Manager 50 regulatory information regulatory label 13 wireless certification labels 13 right control zone, identifying 8 right-edge swipe TouchPad and touch screen gesture 26 RJ-45 (network) jack, identifying 8 RJ-45 (network) status lights, identifying 8 S security cable lock, installing 44 security cable slot, identifying 8 serial number 12 serial number, computer 12 service door release latch 9 Index 57 service door, identifying 8 service labels, locating 12 setting password protection on wakeup 30 Setup Utility (BIOS) passwords 42 sharing media 17 shipping the computer 39 shutdown 35 SIM slot, identifying 9 Sleep exiting 30 initiating 30 Sleep and Hibernation initiating 29 slots memory card reader 7 security cable 8 SIM 9 software Disk Cleanup 37 Disk Defragmenter 37 software updates, installing 43 speakers connecting 19 identifying 9 Starting right 1 storing a battery 33 supported discs, recovery 49 system recovery 51 system restore point creating 50 system restore point, creating 49 T tap TouchPad and touch screen gesture 25 temperature 33 testing an AC adapter 35 top-edge swipe and bottom-edge swipe TouchPad and touch screen gesture 27 touch screen gesture, one-finger slide 27 TouchPad using 25 TouchPad and touch screen gestures left-edge swipe 27 right-edge swipe 26 58 Index Windows tools using 50 Wireless Assistant software 14 wireless button 14 wireless certification label 13 wireless controls button 14 operating system 14 Wireless Assistant software 14 wireless light 10, 14 wireless network (WLAN) connecting 15 corporate WLAN connection 15 functional range 16 public WLAN connection 15 wireless network, securing 44 WLAN antennas, identifying 10 WLAN device 13 WLAN label 13 WWAN antennas, identifying 10 WWAN device 16 tap 25 top-edge swipe and bottom-

edge swipe 27 two-finger click 26 two-finger pinch/zoom 26 two-finger scroll 25 TouchPad light, identifying 9 TouchPad zone, identifying 9 TouchPad, buttons 7, 8 traveling with the computer 13, 33, 39 turning off the computer 35 two-finger click TouchPad and touch screen gesture 26 two-finger pinch/zoom TouchPad and touch screen gesture 26 two-finger scroll TouchPad and touch screen gesture 25 U unresponsive system 35 updating programs and drivers 37 USB 2.0 charging (powered) port, identifying 9 USB 2.0 port, identifying 9 USB 3.0 charging (powered) port, identifying 9 USB 3.0 port, identifying 9 using a keyboard and mouse 28 using external AC power 34 using passwords 41 using the TouchPad 25 V vents, identifying 9 VGA port, connecting 21 video 20 W webcam identifying 10 using 19 webcam light, identifying 10 Windows system restore point 49, 50 Windows applications key, identifying 10 Windows key, identifying 10 Windows passwords 41

User Guide DRAFT Product notice Software terms This guide describes features that are common to most models. Some features may not be available on your computer. Not all features are available in all editions of Windows. This computer may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows functionality. See http://www.microsoft.com for details. By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a refund subject to the refund policy of your place of purchase. For any further information or to request a full refund of the computer, please contact your local point of sale (the seller). Copyright 2013 Hewlett-Packard Development Company, L.P. Adobe Photoshop Lighthouse is a trademark of Adobe Systems Incorporated. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Windows is a U.S. registered trademark of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: September 2013 Document Part Number: 736656-xx1 DRAFT Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). iii DRAFT iv Safety warning notice DRAFT Table of contents 1 Starting right ................................................................................................................................................... 1 Visit the HP Apps Store ........................................................................................................................ 1 Best practices ....................................................................................................................................... 1 Fun things to do .................................................................................................................................... 2 More HP resources .............................................................................................................................. 3 2 Getting to know your computer ..................................................................................................................... 5 Finding your hardware and software information ................................................................................. 5 Locating hardware ............................................................................................................... 5 Locating software ................................................................................................................. 5 Right side ............................................................................................................................................. 6 Left side ................................................................................................................................................ 7 Display .................................................................................................................................................. 8 Top ....................................................................................................................................................... 9 TouchPad ............................................................................................................................ 9 Lights ................................................................................................................................. 10 Buttons ............................................................................................................................... 11 Keys ................................................................................................................................... 12 Bottom ................................................................................................................................................ 13 Labels ................................................................................................................................................. 14 3 Connecting to a network .............................................................................................................................. 16 Connecting to a wireless network ....................................................................................................... 16 Using the wireless controls ................................................................................................ 16 Using the wireless button .................................................................................. 16 Using operating system controls ....................................................................... 17 Sharing data and drives and accessing software .............................................................. 17 Using a WLAN ................................................................................................................... 18 Using an Internet service provider .................................................................... 18 Setting up a WLAN ............................................................................................ 18 Configuring a wireless router ............................................................................ 19 Protecting your WLAN ....................................................................................... 19 Connecting to a WLAN ...................................................................................... 19 Using Bluetooth wireless devices (select models only) ..................................................... 20 v DRAFT 4 Enjoying entertainment features ................................................................................................................. 21 Multimedia features ............................................................................................................................ 21 Using the webcam .............................................................................................................................. 22 Editing media in Adobe Photoshop Lightroom ................................................................................... 23 Special features ................................................................................................................. 23 Using audio ........................................................................................................................................ 23 Connecting speakers ......................................................................................................... 23 Connecting headphones and microphones ....................................................................... 24 Using Beats Audio ............................................................................................................. 24 Accessing Beats Audio Control Panel ............................................................... 24 Enabling and disabling Beats Audio .................................................................. 24 Testing your audio features ............................................................................................... 24 Using video ......................................................................................................................................... 25 Connecting video devices using an HDMI cable ............................................................... 25 Setting up HDMI audio ...................................................................................... 26 Connecting a digital display device .................................................................................... 27 View media in high-resolution display (select models only) ............................................................... 28 5 Navigating the screen ................................................................................................................................... 29 Using the TouchPad and gestures ..................................................................................................... 29 Selecting and opening ....................................................................................................... 30 Scrolling ............................................................................................................................. 31 Pinching/zooming .............................................................................................................. 32 Right-click .......................................................................................................................... 33 Rotating ............................................................................................................................. 34 Flicking ............................................................................................................................... 35 Close an app ...................................................................................................................... 36 Edge swipes ...................................................................................................................... 37 Display and select a charm ............................................................................... 37 Reveal and select open apps ............................................................................ 38 Display the Customize icon ............................................................................... 39 Switch between open apps ............................................................................... 40 Using touch screen gestures .............................................................................................................. 41 Selecting ............................................................................................................................ 41 Scrolling and moving objects ............................................................................................. 42 Pinching/zooming .............................................................................................................. 43 Rotating ............................................................................................................................. 43 Edge swipes ...................................................................................................................... 44 Display the charms ............................................................................................ 44 Access open apps ............................................................................................. 44 Display the Customize icon ............................................................................... 45 vi DRAFT Using the keyboard and mouse .......................................................................................................... 45 Using the keys ................................................................................................................... 45 Using the action keys ........................................................................................ 45 Using the hot keys ............................................................................................. 46 Using voice navigation ....................................................................................................................... 47 Windows essential tasks .................................................................................................................... 47 Displaying the Start button ................................................................................................. 47 Displaying the Start menu .................................................................................................. 47 Displaying all apps ............................................................................................................. 48 Opening apps .................................................................................................................... 48 Displaying open apps ........................................................................................................ 48 Closing an open app .......................................................................................................... 48 Switching between open apps ........................................................................................... 48 Opening the Windows desktop and returning to the Start screen ..................................... 48 Displaying charms ............................................................................................................. 49 Searching for apps, settings, or files .................................................................................. 49 Moving an app ................................................................................................................... 49 Creating an app group ....................................................................................................... 49 Unpinning an app from the Start screen ............................................................................ 49 Resizing an app ................................................................................................................. 49 Printing ............................................................................................................................... 49 Save and organize favorites .............................................................................................. 49 Downloading apps from the Windows Store ...................................................................... 50 Locking the computer ........................................................................................................ 50 Using Windows shortcut keys ............................................................................................ 51 6 Managing power ............................................................................................................................................ 53 Initiating Sleep and Hibernation ......................................................................................................... 53 Intel Rapid Start Technology (select models only) ............................................................ 53 Manually initiating and exiting Sleep .................................................................................. 54 Manually initiating and exiting Hibernation (select models only) ....................................... 54 Setting password protection on wakeup ............................................................................ 54 Using the power meter and power settings ........................................................................................ 55 Running on battery power .................................................................................................................. 55 Factory-sealed battery ....................................................................................................... 55 Finding battery information ................................................................................................ 55 Conserving battery power .................................................................................................. 56 Identifying low battery levels .............................................................................................. 56 Resolving a low battery level ............................................................................................. 56 Resolving a low battery level when external power is available ........................ 56 Resolving a low battery level when no power source is available ..................... 56 vii DRAFT Resolving a low battery level when the computer cannot exit Hibernation ....... 56 Running on external AC power .......................................................................................................... 57 Troubleshooting power problems ...................................................................................... 57 HP CoolSense (select models only) ................................................................................................... 58 Refreshing your software content with Intel Smart Connect Technology (select models only) .......... 58 Shutting down (turning off) the computer ........................................................................................... 59 7 Maintaining your computer .......................................................................................................................... 60 Updating programs and drivers .......................................................................................................... 60 Cleaning your computer ..................................................................................................................... 60 Cleaning procedures .......................................................................................................... 60 Cleaning the display (All-in-Ones or Notebooks) .............................................. 61 Cleaning the sides or cover ............................................................................... 61 Cleaning the TouchPad, keyboard, or mouse ................................................... 61 Traveling with or shipping your computer ........................................................................................... 61 8 Securing your computer and information .................................................................................................. 63 Using passwords ................................................................................................................................ 63 Setting Windows passwords .............................................................................................. 64 Setting Setup Utility (BIOS) passwords ............................................................................. 64 TPM Embedded Security device (select models only) ....................................................................... 65 Using Internet security software ......................................................................................................... 65 Using antivirus software ..................................................................................................... 65 Using firewall software ....................................................................................................... 66 Installing software updates ................................................................................................................. 66 Installing critical security updates ...................................................................................... 66 Installing HP and third-party software updates .................................................................. 66 Securing your wireless network .......................................................................................................... 66 Backing up your software applications and information ..................................................................... 67 Using an optional security cable lock ................................................................................................. 67 9 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) ...................................................... 68 Starting Setup Utility (BIOS) ............................................................................................................... 68 Updating the BIOS ............................................................................................................................. 68 Determining the BIOS version ........................................................................................... 68 Downloading a BIOS update ............................................................................................. 69 Using HP PC Hardware Diagnostics (UEFI) ...................................................................................... 69 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ............................... 70 viii DRAFT 10 Backing up, restoring, and recovering ..................................................................................................... 71 Creating recovery media and backups ............................................................................................... 71 Creating HP Recovery media ............................................................................................ 71 Restore and recovery ......................................................................................................................... 72 Recovering using HP Recovery Manager .......................................................................... 73 What you need to know ..................................................................................... 73 Using the HP Recovery partition (select models only) ...................................... 73 Using HP Recovery media to recover ............................................................... 74 Changing the computer boot order ................................................................... 74 Removing the HP Recovery partition ................................................................................. 74 11 Specifications .............................................................................................................................................. 75 Input power ......................................................................................................................................... 75 Operating environment ....................................................................................................................... 75 12 Electrostatic Discharge .............................................................................................................................. 76 Index ................................................................................................................................................................... 77 ix DRAFT x DRAFT 1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer, fun things to do with your computer, and where to find additional HP resources. Visit the HP Apps Store To download apps to the Start screen, visit the HP Apps Store. The HP Apps Store offers a wide choice of popular games, entertainment and music apps, productivity apps, and apps exclusive to HP. The selection is updated regularly and includes regional content and country-specific offers. Be sure to check the HP Apps Store frequently for new and updated features. IMPORTANT: You must be connected to the Internet to access the HP Apps Store. To view and download an app:

1. 2. 3. From the Start screen, select the Store app. Select HP Picks to view all the available apps. Select the app you want to download, and then follow the on-screen instructions. When the download is complete, the app appears on the Start screen. Best practices To get the most out of your smart investment, after you set up and register the computer, we recommend the following steps:

If you havent already done so, connect to a wired or wireless network. See details in Connecting to a network. Take a minute to browse Windows essential tasks to explore the new Windows features. Become familiar with the computer hardware and software. For more information, see Getting to know your computer and Enjoying entertainment features for information. Update or purchase antivirus software. Learn more at Using antivirus software. Back up your hard drive by creating recovery discs or a recovery flash drive. See Backing up, restoring, and recovering. Visit the HP Apps Store 1 DRAFT Fun things to do You know that you can watch a YouTube video on the computer. But did you know that you can also connect your computer to a TV or gaming console? For more information, see Connecting video devices using an HDMI cable. You know that you can listen to music on the computer. But did you know that you can also stream live radio to the computer and listen to music or talk radio from all over the world? See Using audio. Experience music the way the artist intended, with deep controlled bass and clear, pure sound. See Using Beats Audio. Whether you are an amateur or professional photographer or somewhere in between, Adobe Photoshop Lightroom 5 is an intuitive, all-in-one solution for bringing out the best in your photographs. It includes powerful yet simple automatic adjustments and features as well as state-of-the-art advanced tools, allowing you to achieve amazing image quality. See Editing media in Adobe Photoshop Lightroom. Use the TouchPad and the new Windows touch gestures for smooth control of images and pages of text. See Using the TouchPad and gestures and Using the TouchPad and gestures. 2 Chapter 1 Starting right DRAFT More HP resources You have already used Setup poster to turn on the computer and locate this guide. To locate resources that provide product details, how-to information, and more, use this table. Resource Setup poster Help and Support To access Help and Support, from the Start screen, type help, and then from the Search window, select Help and Support. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/

wwcontact_us.html. Worldwide support To get support in your language, go to http://welcome.hp.com/country/us/en/

wwcontact_us.html. Safety & Comfort Guide To access this guide:

1. 2. From the Start screen, type support, and then select the HP Support Assistant app. Select My computer, and then select User guides. or Go to http://www.hp.com/ergo. Regulatory, Safety and Environmental Notices To access this guide:

1. From the Start screen, type support, and then select the HP Support Assistant app. Contents Overview of computer setup, features, and using Windows. A broad range of how-to information and troubleshooting tips Online chat with an HP technician Email support Support telephone numbers HP service center locations Proper workstation setup Guidelines for posture and work habits that increase your comfort and decrease your risk of injury Electrical and mechanical safety information Important regulatory notices, including proper battery disposal information More HP resources 3 DRAFT Contents Specific warranty information about this computer Resource Limited Warranty*

To access this warranty:

1. 2. From the Start screen, type support, and then select the HP Support Assistant app. Select My computer, and then select Warranty and services. or Go to http://www.hp.com/go/orderdocuments.

*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your computer and/or on the CD or DVD provided in the box. In some countries or regions, HP may provide a printed HP Limited Warranty in the box. For some countries or regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/orderdocuments or write to:

North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address. IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/go/

contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. 4 Chapter 1 Starting right DRAFT 2 Getting to know your computer Finding your hardware and software information Locating hardware To find out what hardware is installed on your computer:

1. 2. From the Start screen, type control panel, and then select Control Panel. Select System and Security, select System, and then select Device Manager in the left column. A list reveals all the devices installed on your computer. To find information about system hardware components and the system BIOS version number, press fn+esc. Locating software To find out what software is installed on your computer:

From the Start screen, move the curser until the arrow appears in the lower-left corner of the screen, and then select the arrow. Finding your hardware and software information 5 DRAFT Right side Component Description

(1)

(2)

(3) USB 3.0 port Mini DisplayPort HDMI port

(4) AC adapter light Connects optional USB devices, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Connects an optional digital display device, such as a high-

performance monitor or projector. Connects an optional video or audio device, such as a high-

definition television, any compatible digital or audio component, or a high-speed HDMI device. On: The AC adapter is connected and the battery is charged. Off: The computer is using battery power.

(5) Power connector Connects an AC adapter. 6 Chapter 2 Getting to know your computer DRAFT Left side Component Description

(1)

(2)

(3) USB 3.0 port Audio-out (headphone)/Audio-in

(microphone) combo jack Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Connects optional USB devices, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide, from the Start screen, type support, and then select the HP Support Assistant app. NOTE: When a device is connected to the jack, the computer speakers are disabled. NOTE: Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio-in (microphone). Connects optional memory cards that store, manage, share, or access information. To insert:

1. Hold the card label side up with connectors facing the slot, and press in on the card until it is firmly seated. To remove:

1. Press in on the card and quickly release it. The card pops out.

(4) Memory card reader

(5) Hard drive light Blinking white: The hard drive is being accessed. Left side 7 DRAFT Display Component

(1) Internal display switch

(2)

(3)

(4)

(5) WLAN antennas (2)*

Internal microphones (2) Ambient light sensor Webcam Description Turns off the display and initiates Sleep if the display is closed while the power is on. NOTE: The internal display switch is not visible from the outside of the computer. Send and receive wireless signals to communicate with wireless local area networks (WLANs). Record sound. Automatically adjusts the display brightness based on the lighting conditions in your environment. Records video and captures photographs. Some models may allow you to video conference and chat online using streaming video. To use the webcam, from the Start screen, type cyberlink, and then select CyberLink YouCam from the list of applications.

(6) Webcam light On: The webcam is in use.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide, from the Start screen, type support, and then select the HP Support Assistant app. 8 Chapter 2 Getting to know your computer DRAFT Display modes Your computer has a hinge that allows you to rotate the display 360 degrees. This allows you to use your computer in three modes: productivity mode, entertainment mode, or tablet mode. Mode Productivity mode Entertainment mode Tablet mode Description To use the notebook in productivity mode, raise the display until you can view the display (about 90 to 100 degrees). To use your notebook in entertainment mode, raise the display, and then rotate it backward to a stand position

(about 315 degrees). You can rest the notebook on the computer bottom or stand it on the front edges. NOTE: The Touchpad and keyboard functions are locked during this mode. To use your notebook as a tablet, raise the display, and then rotate it backward until it is flush with the computer bottom (360 degrees). NOTE: The Touchpad and keyboard functions are locked during this mode. 10 Chapter 2 Getting to know your computer DRAFT Top TouchPad Component Description

(1)

(2)

(3)

(4)

(5) Left control zone TouchPad zone Left TouchPad button Right TouchPad button Right control zone Textured area that allows you to perform additional gestures. Moves the on-screen pointer and selects or activates items on the screen. NOTE: The TouchPad also supports edge-swipe gestures. For more information, see Edge swipes. Functions like the left button on an external mouse. Functions like the right button on an external mouse. Textured area that allows you to perform additional gestures. Top 9 DRAFT Lights Component

(1) Power light Description On: The computer is on. Blinking: The computer is in the Sleep state, a power-

saving state. The computer shuts off power to the display and other unneeded components. Off: The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power. NOTE: For select models, the Intel Rapid Start Technology feature is enabled at the factory. Rapid Start Technology allows your computer to resume quickly from inactivity. For more information, see Initiating Sleep and Hibernation.

(2)

(3)

(4) Caps lock light On: Caps lock is on, switching the keys to all capital letters. Mute light Wireless light Amber: Computer sound is off. Off: Computer sound is on. On: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth device, is on. NOTE: On some models, the wireless light is amber when all wireless devices are off. 10 Chapter 2 Getting to know your computer DRAFT Buttons Component Power button Description When the computer is off, press the button to turn on the computer. When the computer is on, press the button briefly to initiate Sleep. When the computer is in the Sleep state, press the button briefly to exit Sleep. When the computer is in Hibernation, press the button briefly to exit Hibernation. CAUTION: Pressing and holding down the power button results in the loss of unsaved information. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button down for at least 5 seconds to turn off the computer. NOTE: For select models, the Intel Rapid Start Technology feature is enabled at the factory. Rapid Start Technology allows your computer to resume quickly from inactivity. For more information, see Initiating Sleep and Hibernation. To learn more about your power settings, from the Start screen, type power options, select Settings, and then select Power Options from the list of applications. Top 11 DRAFT Keys Component Description

(1)

(2)

(3)

(4)

(5) esc key fn key Reveals system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with the b key or the esc key. Windows key Returns you to the Start screen from any app or window. NOTE: Pressing the Windows key again will return you to the most recent app that you had open. Action keys Execute frequently used system functions. Windows applications key Reveals options for a selected object. 12 Chapter 2 Getting to know your computer DRAFT Bottom Component Description

(1)

(2) Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Speakers (2) Produce sound. Bottom 13 DRAFT Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. IMPORTANT: All labels described in this section will be located in one of 3 places, depending on your computer model: Affixed to the bottom of the computer, located in the battery bay, or under the service door. For help finding these locations, refer to Getting to know your computer. Service labelProvides important information to identify your computer. When contacting support, you will probably be asked for the serial number, and possibly for the product number or the model number. Locate these numbers before you contact support. NOTE: Your service labels will resemble one of the examples shown below. Refer to the illustration that most closely matches the service label on your computer. Component

(1)

(2)

(3)

(4)

(5) Product name Serial number Product number Warranty period Model number (select models only) Component

(1)

(2)

(3) Serial number Product number Warranty period 14 Chapter 2 Getting to know your computer DRAFT Component

(4)

(5) Model number (select models only) Revision number Regulatory label(s)Provide(s) regulatory information about the computer. Wireless certification label(s)Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. Labels 15 DRAFT 3 Connecting to a network Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with one or more of the following wireless devices:

Wireless local area network (WLAN) deviceConnects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point. Bluetooth device (select models only)Creates a personal area network (PAN) to connect to other Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close togethertypically within 10 meters (approximately 33 feet) of each other. For more information about wireless technology, see the information and website links provided in Help and Support. From the Start screen, type help, and then select Help and Support. Using the wireless controls You can control the wireless devices in your computer using these features:

Wireless button, wireless switch, or wireless key (referred to in this chapter as the wireless button) (select models only) Operating system controls Using the wireless button The computer has a wireless button, one or more wireless devices, and one or two wireless lights, depending on the model. All of the wireless devices on your computer are enabled at the factory, so the wireless light is on (white) when you turn on the computer. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. If the wireless light is white, at least one wireless device is on. If the wireless light is off, all wireless devices are off. NOTE: On some models, the wireless light is amber when all wireless devices are off. Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or turn off all the wireless devices simultaneously. 16 Chapter 3 Connecting to a network DRAFT Using operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems. To use operating system controls:

1. 2. For more information, from the Start screen, type help, and then select Help and Support. From the Start screen, type control panel, and then select Control Panel. Select Network and Internet, and then select Network and Sharing Center. Sharing data and drives and accessing software When your computer is part of a network, you are not limited to using only the information that is stored in your computer. Network computers can exchange software and data with each other. NOTE: When a disc like a DVD movie or game is copy-protected, it cannot be shared. To share folders or content on the same network:

1. 2. From the Windows desktop, open File Explorer. From This PC, click a folder with content you want to share. Select Share from the navigation bar at the top of the window, and then click Specific people. Type a name in the File Sharing box, and then click Add. 3. 4. Click Share and then follow the on-screen instructions. To share drives on the same network:

1. From the Windows desktop, right-click the network status icon in the notification area, at the far right of the taskbar. Select Open Network and Sharing Center. 2. In the Local Disk (C:) Properties window, select Advanced Sharing. 3. Click the Share tab, and then click Advanced sharing. 4. 5. Check Share this folder. To share drives on the same network:

1. From the Windows desktop, right-click the network status icon in the notification area, at the far right of the taskbar. Select Open Network and Sharing Center. 2. 3. Under View your active networks, select an active network. 4. Select Change advanced sharing settings to set sharing options for privacy, network discovery, file and printer sharing or other network options. Connecting to a wireless network 17 DRAFT Using a WLAN With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably. A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points that can accommodate a large number of computers and accessories and can separate critical network functions. A home or small office WLAN typically uses a wireless router, which allows several wireless and wired computers to share an Internet connection, a printer, and files without requiring additional pieces of hardware or software. To use the WLAN device in your computer, you must connect to a WLAN infrastructure (provided through a service provider or a public or corporate network). Using an Internet service provider When you are setting up Internet access in your home, you must establish an account with an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the Internet service. NOTE: Your ISP will give you a user ID and a password to use for Internet access. Record this information and store it in a safe place. Setting up a WLAN To set up a WLAN and connect to the Internet, you need the following equipment:

A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider A wireless router (2) (purchased separately) A wireless computer (3) NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type of modem you have. The illustration below shows an example of a wireless network installation that is connected to the Internet. As your network grows, additional wireless and wired computers can be connected to the network to access the Internet. For help in setting up your WLAN, see the information provided by your router manufacturer or your ISP. 18 Chapter 3 Connecting to a network DRAFT Configuring a wireless router For help in configuring a wireless router, see the information provided by your router manufacturer or your ISP. NOTE:

It is recommended that you initially connect your new wireless computer to the router by using the network cable provided with the router. When the computer successfully connects to the Internet, disconnect the cable, and access the Internet through your wireless network. Protecting your WLAN When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and airports may not provide any security. If you are concerned about the security of your computer when connected to a hotspot, limit your network activities to email that is not confidential and basic Internet surfing. Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected signals. Take the following precautions to protect your WLAN:

Use a firewall. A firewall checks information and requests that are sent to your network, and discards any suspicious items. Firewalls are available in both software and hardware. Some networks use a combination of both types. Use wireless encryption. Wireless encryption uses security settings to encrypt and decrypt data that is transmitted over the network. For more information, from the Start screen, type help, and then select Help and Support. Connecting to a WLAN To connect to the WLAN, follow these steps:

1. Be sure that the WLAN device is on. If the device is on, the wireless light is white. If the wireless light is off, press the wireless button. NOTE: On some models, the wireless light is amber when all wireless devices are off. From the Start screen, point to the far-right upper or lower corner to display the charms. Select Settings, and then click the network status icon. Select your WLAN from the list. 2. 3. 4. 5. Click Connect. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the code, and then click Sign in to complete the connection. NOTE:

If no WLANs are listed, you may be out of range of a wireless router or access point. NOTE:

If you do not see the WLAN you want to connect to, from the Windows desktop, right-

click the network status icon, and then select Open Network and Sharing Center. Click Set up a new connection or network. A list of options is revealed, allowing you to manually search for and connect to a network or to create a new network connection. Follow the on-screen instructions to complete the connection. 6. Connecting to a wireless network 19 DRAFT After the connection is made, place the mouse pointer over the network status icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection. NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. Using Bluetooth wireless devices (select models only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following:

Computers (desktop, notebook, PDA) Phones (cellular, cordless, smart phone) Imaging devices (printer, camera) Audio devices (headset, speakers) Mouse Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices. For information about configuring and using Bluetooth devices, see the Bluetooth software Help. 20 Chapter 3 Connecting to a network DRAFT 4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like a monitor, projector, or TV, or speakers and headphones. Multimedia features Here are some of the entertainment features on your computer. Component

(1)

(2)

(3)

(4) Internal microphones (2) Ambient light sensor Webcam Description Records sound. Automatically adjusts the display brightness based on the lighting conditions in your environment. Records video and captures photographs. Some models may allow you to video conference and chat online using streaming video. From the Start screen, type cyberlink, and then select CyberLink YouCam from the list of applications. Webcam light On: The webcam is in use. Multimedia features 21 DRAFT Component Description

(5)

(6)

(7) HDMI port Mini DisplayPort USB 3.0 ports (2) Connects an optional video or audio device, such as a high-definition television, any compatible digital or audio component, or a high-speed HDMI device. Connects an optional digital display device, such as a high-performance monitor or projector. Connect optional USB devices, such as a keyboard, mouse, external drive, printer, scanner or USB hub.

(8) Speakers (2) Produce sound.

(9) Memory card reader

(10) Audio-out (headphone)/Audio-in

(microphone) combo jack NOTE: The speakers are located on the bottom of the computer. Connects optional memory cards that store, manage, share, or access information. 1. 2. To insert the memory card, hold the card, label side up with connectors facing the slot and push in the card until it is firmly seated. To remove the memory card, press in on the card and quickly release it until it pops out. Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide, from the Start screen, type support, and then select the HP Support Assistant app. NOTE: When a device is connected to the jack, the computer speakers are disabled. NOTE: Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio-in (microphone). Using the webcam The computer has an integrated webcam that records video and captures photographs. Some models may allow you to video conference and chat online using streaming video. To start the webcam, from the Start screen, type cyberlink, and then select CyberLink YouCam from the list of applications. For details about using the webcam, go to Help and Support. From the Start screen, type help, and then select Help and Support. 22 Chapter 4 Enjoying entertainment features DRAFT Editing media in Adobe Photoshop Lightroom Whether you are an amateur or professional photographer or somewhere in between, Adobe Photoshop Lightroom 5 is an intuitive, all-in-one solution for bringing out the best in your photographs. To start Lightroom:

From the Start screen, select the Adobe Photoshop Lightroom 5 app, and then follow the on-

screen instructions. TIP: For more information on using Lightroom, go to http://helpx.adobe.com/lightroom.html. Lightroom allows you to easily remove defects and unwanted objects from your images, and automatically straighten tilted shots and share your photos. View and organize, perfect and process, print and share. Lightroom includes everything you need. Get the best from every pixel in your photos, whether you shot them with a professional camera or a camera phone. Lightroom includes a comprehensive set of advances tools for tone, contrast, color, noise reduction and more. Easily share whenever and however you want to show your images. Lightroom makes it easy with timesaving tools for sharing your work with friends, family, and clients. Special features Upright: Straighten your tilted shots. Advanced Healing Brush: Erase dust spots, splotches, and other flaws. Change the brush size and move it in precise paths to make unwanted scene elements disappear. Video slide shows: Easily share your work in elegant video slide shows that combine still images, video clips, and music in creative HD videos that can be viewed on almost any computer or device. Using audio On your computer, you can play music CDs on an optional external optical drive, download and listen to music, stream audio content from the Web (including radio), record audio, or mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones. Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or to the audio-

out (headphone)/audio-in (microphone) combo jack on your computer. To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect high-definition speakers to the computer, see Setting up HDMI audio. Before connecting speakers, lower the volume setting. Editing media in Adobe Photoshop Lightroom 23 DRAFT Connecting headphones and microphones You can connect wired headphones or headsets to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. Many headsets with integrated microphones are commercially available. To connect wireless headphones or headsets to your computer, follow the device manufacturer's instructions. WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this guide, from the Start screen, type support, and then select the HP Support Assistant app. Using Beats Audio Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a clear sound. You can experience Beats Audio through the computer's internal speakers, through external speakers connected to a USB port, or through Beats Audio headphones connected to the headphone jack. Accessing Beats Audio Control Panel Use Beats Audio Control Panel to view and manually control audio and bass settings. From the Start screen, type control panel, select Control Panel, select Hardware and Sound, and then select Beats Audio Control Panel. Enabling and disabling Beats Audio To enable or disable Beats Audio, press the fn key in combination with the b key. Testing your audio features To check the audio functions on your computer, follow these steps:

1. From the Start screen, type control panel, and then select Control Panel from the list of applications. Select Hardware and Sound, and then select Sound. 2. 3. When the Sound window opens, select the Sounds tab. Under Program Events, select any sound event, such as a beep or alarm, and then click Test. You should hear sound through the speakers or through connected headphones. From the Start screen, type sound, and then select Sound Recorder. To check the recording functions on your computer, follow these steps:

1. 2. Click Start Recording and speak into the microphone. 3. 4. Open a multimedia program and play the recording. Save the file to your desktop. 24 Chapter 4 Enjoying entertainment features DRAFT To confirm or change the audio settings on your computer, follow these steps:

1. From the Start screen, type control panel, and then select Control Panel from the list of applications. Select Hardware and Sound, and then select Sound. 2. Using video Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network. To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV. Most computers have a video graphics array (VGA) port, which connects analog video devices. Some computers also have a high-definition multimedia interface

(HDMI) port, which allows you to connect a high-definition monitor or TV. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Check the device manufacturer's instructions. Connecting video devices using an HDMI cable NOTE: To connect an HDMI device to your computer, you need an HDMI cable, sold separately. To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the following instructions. 1. Connect one end of the HDMI cable to the HDMI port on the computer. 2. Connect the other end of the cable to the high-definition TV or monitor. 3. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and the external device. Using video 25 DRAFT Extend: View the screen image extended across both the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE: For best results, especially if you choose the Extend option, adjust the screen resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel from the list of applications. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Setting up HDMI audio HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following these steps:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. 2. On the Playback tab, select the name of the digital output device. 3. Click Set Default, and then click OK. To return the audio stream to the computer speakers:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click Playback devices. 2. On the Playback tab, click Speakers. 3. Click Set Default, and then click OK. 26 Chapter 4 Enjoying entertainment features DRAFT Connecting a digital display device The Mini DisplayPort connects a digital display device such as a high-performance monitor or projector (cable purchased separately). The DisplayPort delivers higher performance than the VGA external monitor port and improves digital connectivity. 1. Connect the Mini DisplayPort connector on the cable to the matching port on your computer. 2. Connect the other end of the cable to the digital display device. 3. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and external device. Extend: View the screen image extended across both the computer and external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE: Adjust the screen resolution of the external device, especially if you choose the Extend option. From the Start screen, type control panel, and then select Control Panel from the list of applications. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Using video 27 DRAFT View media in high-resolution display (select models only) Your computer has a stunning Full High Definition (FHD) or Quad High Definition (QHD) display that enhances the viewing experience with movies, games, and even everyday tasks in a whole new light. If your computer has a high-resolution display, you may want to adjust the display settings when working in older software programs that are not compatible with high resolution. If the text in apps is too small, try zooming in. For Web pages, press ctrl + / - to zoom in and out. TIP:

resolution when working in older software, or right-click on the desktop and select Screen resolution. If these steps do not work, go to the control panel display settings and change to a lower 28 Chapter 4 Enjoying entertainment features DRAFT 5 Navigating the screen You can navigate the computer screen in several ways:

Touch gestures Keyboard and mouse Voice navigation Touch gestures can be used on your computer TouchPad or on a touch screen. NOTE: An external USB mouse (purchased separately) can be connected to one of the USB ports on the computer. Your computer has special action keys and hot key functions on the keyboard to perform routine tasks. Using the TouchPad and gestures The large TouchPad allows you to navigate the computer screen and control the pointer by using simple finger movements. You can customize the touch gestures by changing settings, button configurations, click speed, and pointer options. You can also view demonstrations of TouchPad gestures. From the Start screen, type control panel, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. TIP: Use the left and right buttons on the TouchPad as you would use the corresponding buttons on an external mouse. NOTE: TouchPad gestures are not supported in all apps. Using the TouchPad and gestures 29 DRAFT Selecting and opening To make an on-screen selection, use the tap function on the TouchPad. Point to an item on the screen, and then tap one finger on the TouchPad zone. Double-tap an item to open it. 30 Chapter 5 Navigating the screen DRAFT Scrolling Scrolling is useful for moving up, down, or sideways on a page or image. Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or right. Using the TouchPad and gestures 31 DRAFT Pinching/zooming Pinching and zooming allow you to zoom in or out on images or text. Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers together. Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers apart. 32 Chapter 5 Navigating the screen DRAFT Right-click 2-finger tap allows you to make menu selections for an object on the screen. NOTE: Using 2-finger tap performs the same functions as using right-click with the mouse. Place two fingers on the TouchPad zone and tap to open the options menu for the selected object. Using the TouchPad and gestures 33 DRAFT Rotating Rotating allows you to turn items such as photos. Point to an object, and then anchor the forefinger of your left hand in the TouchPad zone. Using your right hand, slide your forefinger in a sweeping motion from 12 oclock to 3 oclock. To reverse the rotation, move your forefinger from 3 oclock to 12 oclock. NOTE: Rotate is intended for specific apps where you can manipulate an object or image. Rotate may not be functional for all apps. 34 Chapter 5 Navigating the screen DRAFT Flicking Flicking allows you to navigate through screens or quickly scroll through documents. Place three fingers on the TouchPad zone and flick your fingers in a light, quick motion left or right. Using the TouchPad and gestures 35 DRAFT Close an app Gently press 3 fingers on the top of the TouchPad zone and swipe your fingers down until the app is closed. 36 Chapter 5 Navigating the screen DRAFT Edge swipes Edge swipes allow you to perform tasks such as changing settings and finding or using apps. Display and select a charm With the charms, you can search, share, start apps, access devices, or change settings. 1. With your finger, press down in the middle of the right control zone to display the charms. 2. Swipe up or down to scroll between the charms, and then select the charm you want to use. Using the TouchPad and gestures 37 DRAFT Reveal and select open apps 1. With your finger, press down in the middle of the left control zone to display the open apps. 2. Swipe up or down to scroll between the open apps, and then select the app you want to use. 38 Chapter 5 Navigating the screen DRAFT Display the Customize icon The top-edge swipe allows you to display the Customize icon at the bottom of the Start screen. Customize allows you to move, resize, pin and unpin apps. IMPORTANT: When an app is active, the top-edge gesture varies depending on the app. Swipe your finger gently from the top edge of the TouchPad zone to reveal the Customize icon. Using the TouchPad and gestures 39 DRAFT Switch between open apps The left-edge swipe accesses your recently opened apps so that you can switch between them quickly. Swipe your finger gently from the left edge of the TouchPad. 40 Chapter 5 Navigating the screen DRAFT Using touch screen gestures A touch screen computer allows you to control items on the screen directly with your fingers. TIP: On touch screen computers, you can perform the gestures on the screen or on the TouchPad. You can also perform on-screen actions with the keyboard and mouse. Selecting To make an on-screen selection, use the tap function. Use one finger to tap an object on the screen. Double-tap an item to open it. Using touch screen gestures 41 DRAFT Scrolling and moving objects The one-finger slide is mostly used to pan or scroll through lists and pages, but you can use it for other interactions, too, such as moving an object. To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. NOTE: When many apps are revealed on the Start screen, you can slide your finger to move the screen left or right. To drag, press and hold an object, and then drag the object to move it. 42 Chapter 5 Navigating the screen DRAFT Pinching/zooming Pinching and zooming allows you to zoom out or in on images or text. Zoom out by placing two fingers apart on the display and then move your fingers together. Zoom in by placing two fingers together on the display and then move your fingers apart. Rotating Rotating allows you to turn items such as photos. Anchor the forefinger of your left hand on the object you want to rotate. Using your right hand, slide your forefinger around in a sweeping motion from 12 oclock to 3 oclock. To reverse the rotation, move your forefinger from 3 oclock to 12 oclock. NOTE: Rotate is intended for specific apps where you can manipulate an object or image. Rotate may not be functional for all apps. Using touch screen gestures 43 DRAFT Edge swipes With edge swipes you can perform tasks such as changing settings and finding or using apps. Display the charms The right-edge swipe reveals the charms, which let you search, share, start apps, access devices, or change settings. Gently swipe your finger inward from the right edge of the display onto the screen to reveal the charms. Access open apps The left-edge swipe reveals your open apps so that you can switch between them quickly. Gently swipe your finger inward from the left edge of the display to switch between apps. Without lifting your finger, swipe back toward the left edge to reveal all open apps. 44 Chapter 5 Navigating the screen DRAFT Display the Customize icon The top-edge swipe or bottom-edge swipe allows you to display the Customize icon on the Start screen. Customize allows you to customize your Start screen. From the Start screen, gently swipe your finger from the top edge or bottom edge of the display onto the screen. Using the keyboard and mouse The keyboard and mouse allow you to type, select items, scroll and to perform the same functions as you do using touch gestures. The keyboard also allows you to use action keys and hot keys to perform specific functions. TIP: The Windows key on the keyboard allows you to quickly return to the Start screen from any window or app. Pressing the Windows key again will return you to the most recent app you had open. NOTE: Depending on the country or region, your keyboard may have different keys and keyboard functions than those discussed in this section. Using the keys Your computer has different ways to quickly access information or perform functions when you use certain keys and key combinations. Using the action keys An action key performs an assigned function. The icon on each of the f1 through f12 keys illustrates the assigned function for that key. To perform an action key function, press and hold the key. The action key feature is enabled at the factory. You can disable this feature in Setup Utility (BIOS). See Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) for instructions on opening Setup Utility (BIOS), and then follow the instructions at the bottom of the screen. Using the keyboard and mouse 45 DRAFT To perform an assigned function after you have disabled the action key feature, you must press the fn key in combination with the appropriate action key. CAUTION: Use extreme care when making changes in Setup Utility. Errors can prevent the computer from operating properly. Icon Key f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 Description Opens Help and Support, which provides tutorials, information about the Windows operating system and your computer, answers to questions, and updates to your computer. Help and Support also provides automated troubleshooting tools and access to support. Decreases the screen brightness incrementally as long as you hold down the key. Increases the screen brightness incrementally as long as you hold down the key. Switches the screen image between display devices connected to the system. For example, if a monitor is connected to the computer, pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. Turns the keyboard backlight feature off or on. NOTE: To conserve battery power, turn off this feature. Plays the previous track of an audio CD or the previous section of a DVD or a BD. Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD. Plays the next track of an audio CD or the next section of a DVD or a BD. Decreases speaker volume incrementally as long as you hold down the key. Increases speaker volume incrementally as long as you hold down the key. Mutes or restores speaker sound. Turns the wireless feature on or off. NOTE: A wireless network must be set up before a wireless connection is possible. Using the hot keys A hot key is a combination of the fn key and the esc key or the b key. To use a hot key:

Briefly press the fn key, and then briefly press the second key of the combination. 46 Chapter 5 Navigating the screen DRAFT Using voice navigation Use your voice to create and edit documents and emails, launch apps, open files, search the Internet, and post to social networking sites. Using Dragon voice recognition software and the integrated microphone on your computer, you can quickly and easily capture your thoughts and ideas. Your computer is equipped with either Dragon Notes or Dragon Assistant. To see what version is installed on your computer, see Locating software. To launch voice navigation software:

1. 2. From the Start screen, type dragon, and then select Dragon Notes or Dragon Assistant. Follow the on-screen instructions to set up and begin using voice navigation. Windows essential tasks Use information in this section to perform everyday Windows tasks. Displaying the Start button To quickly return to the Start screen from any app or window:

TIP: Press the Start button or Windows key again to return you to the most recent app that you had open. Point to the lower-left corner of the Start screen or the Windows desktop, or press on the lower-

left control zone on the TouchPad, and then click the Start button

. or Press the Windows key on the keyboard. Displaying the Start menu The Start menu offers quick access to frequently used features such as Control Panel, areas within Control Panel, File Explorer, Search, Shut down, and Desktop. To display the Start menu, point to the lower-left corner of the Start screen or the Windows desktop, right-click the Start button to display the Start menu, and then select one of the following items:

Programs and FeaturesUninstall or change programs on your computer. Mobility CenterAdjust commonly used mobile PC settings. Power OptionsConserve energy or maximize performance. Event ViewerView event logs. SystemView information about your computer and change settings. Device ManagerView and update device driver software. Network ConnectionsCheck network status, change settings, and set preferences for sharing files and printers. Disk ManagementManage the disk drives on your computer. Using voice navigation 47 DRAFT Computer ManagementAccess System Tools Windows PowerShell (formerly Command prompt)Open a command-line shell and scripting environment. Windows PowerShell (Admin)Open a commmand-line shell environment used by administrators to perform remote computer management. Task ManagerView and end running processes. Control PanelAdjust computer settings. File ExplorerView and manage files and folders on the computer. SearchFind apps, files, or folders on the computer or on the Web. RunOpen a file, folder, app, or website. Shut downTurn off the computer. DesktopOpen the Windows desktop. Displaying all apps From the Start screen, move the curser until the arrow appears in the lower-left corner, and then select the arrow. Opening apps Using the TouchPad or touchscreen, select an app on the Start screen, such as mail, calendar, Internet Explorer, camera, or photos. Displaying open apps When you have one or more apps open, you can display the open apps. With your finger, press in the middle of the left control zone to display the open apps. Closing an open app Gently press 3 fingers on the top of the TouchPad zone and swipe your fingers down until app is closed. Switching between open apps When you have one or more apps open, you can switch quickly from one open app to another. Swipe your finger gently from the left edge of the TouchPad or touch screen to switch between open apps. Opening the Windows desktop and returning to the Start screen The Desktop app on the Start screen opens the Windows desktop so that you can run traditional applications. Select the Desktop app on the Start screen 48 Chapter 5 Navigating the screen DRAFT Displaying charms Display the five charms at the right side of the screen to perform the following tasks:

SearchFind apps, settings, or files on your computer or on the Web. ShareSend links, photos, and more to your friends and social networks without leaving the app you're using. StartReturn to the Start screen from any open app or window. DevicesSend files to printers and other devices, or stream movies to TVs. SettingsShut down your computer, change the volume, or configure account settings. With your finger, press down in the middle of the right control zone to display the charms. Searching for apps, settings, or files The Search feature allows you to search for apps, settings, or files. 1. From the Start screen, start typing the name of an app, file, or setting. The Search screen is displayed immediately. If the search item is not listed, select Settings or Files, and then select from the list of displayed items. Moving an app 2. Select and hold an app, and then drag the app to a different area on the Start screen. Creating an app group Drag apps into groups to organize the Start screen in your favorite arrangement. To name a group, select the minus - icon in the lower-right corner of the Start screen, select Customize, select Name group, and then enter a name for the group. Unpinning an app from the Start screen Right-click an app, and then select Unpin from Start. Resizing an app 1. Right-click the app on the Start screen, select Resize at the bottom of the screen, and then select Large, Wide, Medium, or Small. To return the app to its original size, right-click the app, select Resize at the bottom of the screen, and then select Large, Wide, Medium, or Small. 2. Printing From the Start screen, type print, select Device Settings, and then select your printer. Save and organize favorites A Save command appears in every Windows app. To save a file or app, select File on the top menu, select Save, and then choose a location in your Documents folder or on the desktop. Windows essential tasks 49 DRAFT Downloading apps from the Windows Store The Windows Store provides many apps that you can download to the Start screen. NOTE: You must be connected to a wireless network before you can connect to the Internet. See Connecting to a network. From the Start screen, select the Store app, and then click an app. It begins to download and install. When the installation is finished, the app appears on the Start screen. Locking the computer Follow these instructions to lock the computer or exit from Windows:

On the Start screen, select your user account picture in the upper-right corner of the screen, and then select Lock or Sign out. 50 Chapter 5 Navigating the screen DRAFT Using Windows shortcut keys Windows provides shortcuts to perform actions quickly. Press the Windows key with a designated key in the table to perform the action. in combination Shortcut key

+

+

+

+

+

+

+

+

+

+

+

+

+

Key Description f1 c d f I k l m o p q r w Returns you to the Start screen from any app or window. NOTE: Pressing the key again returns you to the most recent app you had open. Opens online Help. Displays the charms. Opens the Windows desktop. Search for files. Open PC Settings. Open Devices. Lock the computer. Minimize all open windows (on the Windows desktop). Turns Autorotate on or off. Transfer the screen image to a connected projector. Search for apps. Open an app or file. Search Settings. Windows essential tasks 51 DRAFT Shortcut key alt

+

+

+

+

+

+

+

+

+

Key x z Description Display the Start menu. Opens All Apps. plus sign (+) Zoom in. minus sign (-) Zoom out. tab Switches between open apps. NOTE: Continue to press this key combination until the app you want is revealed. ctrl + tab Display recent apps. period (.) Snap an app. prt sc f4 Copy the active app screen or document. Close an active app. For additional information on Windows shortcut keys, go to Help and Support. From the Start screen, type help, and then select Help and Support. 52 Chapter 5 Navigating the screen DRAFT 6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power only and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Your computer supports an optimal power plan to manage how your computer uses and conserves power so that computer performance is balanced with power conservation. Initiating Sleep and Hibernation Windows has two power-saving states, Sleep and Hibernation. SleepThe Sleep state is automatically initiated after a period of inactivity when the computer is running on battery power or on external power. Your work is saved to memory, allowing you to resume your work very quickly. HibernationThe Hibernation state is automatically initiated if the battery reaches a critical level. In the Hibernation state, your work is saved to a hibernation file and the computer turns off. NOTE: You can also manually initiate Hibernation and Sleep. See Manually initiating and exiting Sleep and Manually initiating and exiting Hibernation (select models only). CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an external media card. NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in the Sleep state or in Hibernation. Intel Rapid Start Technology (select models only) For select models, the Intel Rapid Start Technology (RST) feature is enabled by default. Rapid Start Technology allows your computer to resume quickly from inactivity. Rapid Start Technology manages your power-saving options as follows:

SleepRapid Start Technology allows you to select the Sleep state. To exit from Sleep, press any key, activate the TouchPad, or briefly press the power button. HibernationRapid Start Technology initiates Hibernation after a period of computer inactivity while the computer is in the Sleep state or when the battery reaches a critical level. After Hibernation is initiated, press the power button to resume your work. NOTE: Rapid Start Technology can be disabled in Setup Utility (BIOS). If you want to be able to initiate Hibernation yourself, you must enable user-initiated Hibernation using Power Options. See Manually initiating and exiting Hibernation (select models only). Initiating Sleep and Hibernation 53 DRAFT Manually initiating and exiting Sleep You can initiate Sleep in any of the following ways:

Close the display. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the charms. Select Settings, select the Power icon, and then select Sleep. To exit Sleep:

Briefly press the power button. If the display is closed, open the display. Press a key on the keyboard. Tap or swipe the TouchPad. When the computer exits Sleep, the power lights turn on and your work returns to the screen. NOTE:

If you have set a password to be required on wakeup, you must enter your Windows password before the computer will return to the screen. Manually initiating and exiting Hibernation (select models only) From the Start screen, type power options, and then select Power Options. In the left pane, click Choose what the power button does. You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. 2. 3. Click Change Settings that are currently unavailable. 4. 5. Click Save changes. When the computer exits Hibernation, the power lights turn on and your work returns to the screen. NOTE:

password before your work will return to the screen. If you have set a password to be required on wakeup, you must enter your Windows In the When I press the power button area, select Hibernate. Setting password protection on wakeup To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps:

From the Start screen, type power options, and then select Power Options. 1. 2. In the left pane, click Require a password on wakeup. 3. Click Change Settings that are currently unavailable. 4. Click Require a password (recommended). If you need to create a user account password or change your current user account NOTE:

password, click Create or change your user account password, and then follow the on-

screen instructions. If you do not need to create or change a user account password, go to step 5. 5. Click Save changes. 54 Chapter 6 Managing power DRAFT Using the power meter and power settings The power meter is located on the Windows desktop. The power meter allows you to quickly access power settings and view the remaining battery charge. To reveal the percentage of remaining battery charge and the current power plan, point to the power meter icon. To use Power Options, select the power meter icon and select an item from the list. From the Start screen, you can also type power options, and then select Power Options. Different power meter icons indicate whether the computer is running on battery or external power. The icon also reveals a message if the battery has reached a low or critical battery level. Running on battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. If the computer has a charged battery installed and the AC adapter is disconnected from the computer, the computer automatically switches to battery power and the display brightness decreases to conserve battery life. The battery in the computer slowly discharges when the computer is off and unplugged from external power. Computer battery life varies, depending on power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors. Factory-sealed battery IMPORTANT: Do not attempt to remove or replace the factory-sealed battery. Removing or replacing the battery could affect your warranty coverage. If the battery is no longer holding a charge, contact support. Your computer has an internal, rechargeable battery that can be replaced only by an authorized service provider. For information about keeping your battery in good condition, see Conserving battery power. To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check in Help and Support. To access battery information, from the Start screen, type support, select the HP Support Assistant app, and then select Battery and performance. If Battery Check indicates that your battery should be replaced, contact support. The battery in this product cannot be easily replaced by users themselves. HP recommends that you contact support to have the battery replaced. Finding battery information To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check in HP Support Assistant. To access battery information, from the Start screen, type support, select the HP Support Assistant app, and then select Battery and performance. HP Support Assistant provides the following tools and information about the battery:

Battery test Information on battery types, specifications, life cycles, and capacity Using the power meter and power settings 55 DRAFT Conserving battery power Tips for conserving battery power and maximizing battery life:

Lower the brightness on the display. Select the Power saver setting in Power Options. Turn off wireless devices when you are not using them. Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port. Stop, disable, or remove any external media cards that you are not using. Before you leave your work, initiate Sleep or shut down the computer. Identifying low battery levels When a battery that is the sole power source for the computer reaches a low or critical battery level, the following behavior occurs:

or The battery light (select models only) indicates a low or critical battery level. The power meter icon on the Windows desktop shows a low or critical battery notification. NOTE: For additional information about the power meter, see Using the power meter and power settings. The computer performs the following actions when the battery reaches a critical level:

If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in the Sleep state, and then shuts down and loses any unsaved information. If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates Hibernation. Resolving a low battery level Resolving a low battery level when external power is available Connect an AC adapter. Connect an optional docking or expansion device. Connect an optional power adapter purchased as an accessory from HP. Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation When the computer lacks sufficient power to exit Hibernation, follow these steps:

1. Connect the AC adapter to the computer and to power. 2. Exit Hibernation by pressing the power button. 56 Chapter 6 Managing power DRAFT Running on external AC power For information on connecting to AC power, refer to the Setup Instructions poster provided in the computer box. The computer does not use battery power when the computer is connected to AC power with an approved AC adapter or an optional docking/expansion device. WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. Connect the computer to AC power under any of the following conditions:

WARNING! Do not charge the computer battery while you are aboard aircraft. When charging or calibrating a battery When installing or modifying system software When writing information to a disc (select models only) When running Disk Defragmenter on computers with internal hard drives When performing a backup or recovery When you connect the computer to AC power:

The battery begins to charge. The display brightness increases. The power meter icon on the Windows desktop changes appearance. When you disconnect AC power, the following events occur:

The computer switches to battery power. The display brightness automatically decreases to save battery life. The power meter icon on the Windows desktop changes appearance. Troubleshooting power problems Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power:

The computer does not turn on. The display does not turn on. The power lights are off. Running on external AC power 57 DRAFT Shut down the computer. To test the AC adapter:

1. 2. Connect the AC adapter to the computer, and then plug it into an AC outlet. 3. Turn on the computer. If the power lights turn on, the AC adapter is working properly. If the power lights remain off, check the connection from the AC adapter to the computer and the connection from the AC adapter to the AC outlet to be sure that the connections are secure. If the connections are secure and the power lights remain off, the AC adapter is not functioning and should be replaced. Contact support for information on obtaining a replacement AC power adapter. HP CoolSense (select models only) automatically detects when the computer is not on a horizontal surface and HP CoolSense adjusts performance and fan settings to keep the surface temperature of your computer at the optimum level of comfort. When HP CoolSense is off, the position of the computer is not detected and the performance and fan options remain at the factory setting. As a result, the surface temperature of the computer might be higher than it would be with HP CoolSense on. To turn CoolSense off or on, follow these steps:

From the Start screen, type coolsense, select Settings, and then select HP CoolSense. Refreshing your software content with Intel Smart Connect Technology (select models only) When the computer is in the Sleep state, Intel Smart Connect Technology periodically causes the computer to exit Sleep. If a network connection is available, Smart Connect updates open apps such as your email inboxes, social network sites, and news pages and then returns the computer to the Sleep state. Smart Connect also syncs content that you have created offline, such as emails. When the computer exits Sleep, you have immediate access to your updated information. To enable this feature or manually adjust the settings, from the Start screen, type smart, and then select Intel Smart Connect Technology. 58 Chapter 6 Managing power DRAFT Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions:

When you need to replace the battery or access components inside the computer When you are connecting an external hardware device that does not connect to a USB or video port If the computer is in the Sleep state or in Hibernation, you must first briefly press the power When the computer will be unused and disconnected from AC power for an extended period Although you can turn off the computer with the power button, the recommended procedure is to use the Windows Shut down command:

NOTE:

button to exit Sleep or Hibernation before shutdown is possible. 1. 2. Save your work and close all open programs. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the charms. Select Settings, select the Power icon, and then select Shut down. or Right-click the Start button in the lower-left corner of the screen, select Shut down, and then select Shut down. 3. If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

Press ctrl+alt+delete, select the Power icon, and then select Shut Down. Press and hold the power button for at least 5 seconds. Disconnect the computer from external power. Shutting down (turning off) the computer 59 DRAFT 7 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition. This chapter provides information about updating your programs and drivers, instructions for cleaning your computer, and tips for traveling with your computer. Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis to the latest versions. Updates can resolve issues and bring new features and options to your computer. Technology is always changing, and updating programs and drivers allows your computer to run the latest technology available. For example, older graphics components might not work well with the most recent gaming software. Without the latest driver, you would not be getting the most out of your equipment. Go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition, register to receive automatic update notifications when they become available. Cleaning your computer Use the following products to safely clean your computer:

Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example:

Disposable wipes, which come in a variety of brand names.) Alcohol-free glass cleaning fluid Water with mild soap solution Dry microfiber cleaning cloth or a chamois (static-free cloth without oil) Static-free cloth wipes CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are not sure that a cleaning product is safe for your computer, check the product contents to make sure that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product. Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning agents can get trapped in the scratches. Cleaning procedures Follow the procedures in this section to safely clean your computer. WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer while it is turned on. Turn off the computer. Disconnect AC power. Disconnect all powered external devices. 60 Chapter 7 Maintaining your computer DRAFT CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on any computer surface. Liquids dripped on the surface can permanently damage internal components. Cleaning the display (All-in-Ones or Notebooks) Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that the display is dry before closing the display. Cleaning the sides or cover To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously or use an acceptable disposable wipe. NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris. Cleaning the TouchPad, keyboard, or mouse WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. CAUTION: To prevent damage to internal components, do not allow liquids to drip between the keys. To clean the TouchPad, keyboard, or mouse, use a soft microfiber cloth or a chamois moistened with one of the cleaning solutions listed previously or use an acceptable disposable wipe. To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a can of compressed air with a straw extension. Traveling with or shipping your computer If you have to travel with or ship your computer, here are some tips to keep in mind to keep your equipment safe. Prepare the computer for traveling or shipping:

Back up your information to an external drive. Remove all discs and all external media cards, such as memory cards, from the computer. Turn off and then disconnect all external devices. Shut down the computer. Take along a backup of your information. Keep the backup separate from the computer. When traveling by air, carry the computer as hand luggage; do not check it in with the rest of your luggage. CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you are allowed to use your computer. In-flight computer use is at the discretion of the airline. Traveling with or shipping your computer 61 DRAFT If you are shipping the computer or a drive, use suitable protective packaging and label the package FRAGILE. If the computer has a wireless device installed, the use of these devices may be restricted in some environments. Such restrictions may apply aboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a particular device, ask for authorization to use your computer before you turn it on. If you are traveling internationally, follow these suggestions:

Check the computer-related customs regulations for each country or region on your itinerary. Check the power cord and adapter requirements for each location in which you plan to use the computer. Voltage, frequency, and plug configurations vary. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. 62 Chapter 7 Maintaining your computer DRAFT 8 Securing your computer and information Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, the non-Windows Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. IMPORTANT: Some security features listed in this chapter may not be available on your computer. Computer risk Unauthorized use of the computer Computer viruses Unauthorized access to data Security feature Power-on password Antivirus software Firewall software Unauthorized access to Setup Utility (BIOS) settings and other system identification information Administrator password Ongoing or future threats to the computer Software updates Unauthorized access to a Windows user account User password Unauthorized removal of the computer Security cable lock Using passwords A password is a group of characters that you choose to secure your computer information and to protect online transactions. Several types of passwords can be set. For example, when you set up your computer for the first time, you were asked to create a user password to secure your computer. Additional passwords can be set in Windows or in the HP Setup Utility (BIOS) that is preinstalled on your computer. You may find it helpful to use the same password for a Setup Utility (BIOS) feature and for a Windows security feature. Use the following tips for creating and saving passwords:

To reduce the risk of being locked out of the computer, record each password and store it in a secure place away from the computer. Do not store passwords in a file on the computer. When creating passwords, follow requirements set by the program. Change your passwords at least every three months. An ideal password is long and has letters, punctuation, symbols, and numbers. Before you send your computer for service, back up your files, delete confidential files, and then remove all password settings. For additional information about Windows passwords, such as screen-saver passwords, from the Start screen, type support, and then select the HP Support Assistant app. Using passwords 63 DRAFT Setting Windows passwords Password User password Administrator password Setting Setup Utility (BIOS) passwords Password Administrator password Power-on password Function Protects access to a Windows user account. Protects administrator-level access to computer contents. NOTE: This password cannot be used to access Setup Utility (BIOS) contents. Function Must be entered each time you access Setup Utility

(BIOS). If you forget your administrator password, you cannot access Setup Utility (BIOS). NOTE: The administrator password can be used in place of the power-on password. NOTE: Your administrator password is not interchangeable with an administrator password set in Windows, nor is it revealed as it is set, entered, changed, or deleted. NOTE:

password check, you must enter the administrator password to access Setup Utility (BIOS). If you enter the power-on password at the first Must be entered each time you turn on or restart the computer. If you forget your power-on password, you cannot turn on or restart the computer. NOTE: The administrator password can be used in place of the power-on password. NOTE: A power-on password is not revealed as it is set, entered, changed, or deleted. To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):

1. To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press f10. 2. Use the arrow keys to select Security, and then follow the on-screen instructions. Your changes take effect when the computer restarts. 64 Chapter 8 Securing your computer and information DRAFT TPM Embedded Security device (select models only) TPM (Trusted Platform Module) provides additional security for your computer. You can modify the TPM settings in Setup Utility. For information on changing Setup Utility settings, see Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI). The following table describes the TPM settings in Setup Utility. Settings Function TPM Embedded Security Device Available/Hidden If the administrator password is set, you can select Available. If you select Hidden, the TPM device is not visible in the operating system. TPM Status Enabled/Disabled If the administrator password is not set, or if TPM Security Device is set to Hidden, this entry is hidden. This value reflects the current physical state for the TPM. The state is enabled or disabled by the Embedded Security State setting. Embedded Security State No Operation/Disabled/Enabled If the administrator password is not set, or if TPM Security Device is set to Hidden, this entry is hidden. You can enable or disable the TPM function. The next time the computer is restarted after the TPM function is set, this value is set to No Operation. TPM Set to Factory Defaults No/Yes If the administrator password is not set, or if the TPM Security Device is set to Hidden, this entry is hidden. If the Embedded Security State is set to Enabled, select Yes to reset the TPM to factory settings, and then press f10 to save and exit. A confirmation message is displayed to Clear the TPM. Press f1 to reset the TPM, or press f2 to cancel the action. Using Internet security software When you use your computer to access email, a network, or the Internet, you potentially expose your computer to computer viruses, spyware, and other online threats. To help protect your computer, Internet security software that includes antivirus and firewall features may be preinstalled on your computer as a trial offer. To provide ongoing protection against newly discovered viruses and other security risks, security software must be kept up to date. It is strongly recommended that you upgrade the security software trial offer or purchase the software of your choice in order to fully protect your computer. Using antivirus software Computer viruses can disable programs, utilities, or the operating system, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. TPM Embedded Security device (select models only) 65 DRAFT To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. An antivirus program may be preinstalled on your computer. It is strongly recommended that you use the antivirus program of your choice in order to fully protect your computer. For more information about computer viruses, from the Start screen, type support, and then select the HP Support Assistant app. Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be software you install on your computer and/or network, or it can be a combination of both hardware and software. There are two types of firewalls to consider:

Host-based firewallsSoftware that protects only the computer it is installed on. Network-based firewallsInstalled between your DSL or cable modem and your home network to protect all the computers on the network. When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked. Installing software updates HP, Windows, and third-party software installed on your computer should be regularly updated to correct security problems and improve software performance. For more information, see Updating programs and drivers. Installing critical security updates HP recommends that you regularly update the software and drivers that were originally installed on your computer. To download the latest versions, go to http://www.hp.com/go/contactHP. At this location, you can also register to receive automatic update notifications when they become available. If you have installed third-party software after you purchased your computer, regularly update the software. Software companies provide software updates to their products to correct security problems and improve functionality of the software. Installing HP and third-party software updates HP recommends that you regularly update the software and drivers that were originally installed on your computer. To download the latest versions, go to http://www.hp.com/go/contactHP. At this location, you can also register to receive automatic update notifications when they become available. If you have installed third-party software after you purchased your computer, regularly update the software. Software companies provide software updates to their products to correct security problems and improve functionality of the software. Securing your wireless network When you set up your wireless network, always enable security features. For more information, see Protecting your WLAN. 66 Chapter 8 Securing your computer and information DRAFT Backing up your software applications and information Regularly back up your software applications and information to protect them from being permanently lost or damaged through a virus attack or a software or hardware failure. For more information, see Backing up, restoring, and recovering. Using an optional security cable lock A security cable lock, which is purchased separately, is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Security cable locks are only one of several methods that should be employed as part of a complete security solution to help maximize theft protection. The security cable slot on your computer may look slightly different from the illustration in this section. For the location of the security cable slot on your computer, see Getting to know your computer. 1. 2. 3. Loop the security cable lock around a secured object. Insert the key (1) into the security cable lock (2). Insert the security cable lock into the security cable slot on the computer (3), and then lock the security cable lock with the key. 4. Remove the key and keep it in a safe place. Backing up your software applications and information 67 DRAFT 9 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory. Starting Setup Utility (BIOS) To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press f10. NOTE: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer, you need to know the version of the system BIOS currently installed. BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing fn+esc (if you are already in Windows) or by using Setup Utility (BIOS). 1. 2. Use the arrow keys to select Main. Be sure that you make note of the BIOS version. 3. To exit Setup Utility (BIOS) without saving your changes, use the arrow keys to select Exit, select Exit Discarding Changes, and then press enter. Select Yes. Start Setup Utility (BIOS) (see Starting Setup Utility (BIOS)). 4. 68 Chapter 9 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) DRAFT Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet. Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. 1. 2. Click Updates and tune-ups, and then click Check for HP updates now. 3. 4. From the Start screen, type support, and then select the HP Support Assistant app. Follow the on-screen instructions. At the download area, follow these steps:

a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. If the update is more recent than your BIOS, make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. Follow the on-screen instructions to download your selection to the hard drive. If the update is more recent than your BIOS, make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. b. NOTE:

installing any software updates, especially system BIOS updates. If you connect your computer to a network, consult the network administrator before From the Start screen, type file, and then select File Explorer. BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download is complete. If no instructions are revealed, follow these steps:

1. 2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:). 3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the update. 4. Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. 5. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components. Using HP PC Hardware Diagnostics (UEFI) 69 DRAFT To start HP PC Hardware Diagnostics UEFI:

1. Turn on or restart the computer, quickly press esc, and then press f2. The BIOS searches three places for the diagnostics tools in the following order:

a. Connected USB drive NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device. b. Hard drive c. BIOS 2. When the diagnostic tool opens, click the type of diagnostic test you want to run, and then follow the on-screen instructions. NOTE:

If you need to stop a diagnostic test, press esc. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English NOTE:

only. 1. Go to http://www.hp.com. 2. Click Support & Drivers, and then click the Drivers & Downloads tab. 3. 4. 5. Enter the product name in the text box, and then click Go. Select your computer model, and then select your operating system. In the Diagnostic section, click HP UEFI Support Environment. or Click Download, and then select Run. 70 Chapter 9 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) DRAFT 10 Backing up, restoring, and recovering This chapter provides information about the following processes:

Creating recovery media and backups Restoring and recovering your system Creating recovery media and backups 1. After you successfully set up the computer, create HP Recovery media. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. HP Recovery media you create will provide the following recovery options:

System RecoveryReinstalls the original operating system and the programs that were installed at the factory. Minimized Image RecoveryReinstalls the operating system and all hardware-related drivers and software, but not other software applications. Factory ResetRestores the computer to its original factory state by deleting all information from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that was installed at the factory. See Creating HP Recovery media. 2. Use the Windows tools to create system restore points and create backups of personal information. For more information and steps, see Help and Support. From the Start screen, type help, and then select Help and Support. Creating HP Recovery media HP Recovery Manager is a software program that offers a way to create recovery media after you successfully set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the original operating system and the software programs installed at the factory, and then configures the settings for the programs. HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive. Only one set of HP Recovery media can be created. Handle these recovery tools carefully, and keep them in a safe place. HP Recovery Manager examines the computer and determines the required storage capacity for the blank USB flash drive or the number of blank DVD discs that will be required. To create recovery discs, your computer must have an optical drive with DVD writer capability, and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use rewritable discs such as CDRW, DVDRW, double-layer DVDRW, or BD-RE

(rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or instead you can use a high-quality blank USB flash drive. If your computer does not include an integrated optical drive with DVD writer capability, but you would like to create DVD recovery media, you can use an external optical drive (purchased Creating recovery media and backups 71 DRAFT separately) to create recovery discs, or you can obtain recovery discs from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. If you use an external optical drive, it must be connected directly to a USB port on the computer; the drive cannot be connected to a USB port on an external device, such as a USB hub. Be sure that the computer is connected to AC power before you begin creating the recovery media. The creation process can take up to an hour or more. Do not interrupt the creation process. If necessary, you can exit the program before you have finished creating all of the recovery DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery Manager, you will be prompted to continue, and the remaining discs will be burned. To create HP Recovery media:

IMPORTANT: For tablets, connect to the keyboard dock before beginning these steps (select models only). 1. 2. If you ever need to recover the system, see Recovering using HP Recovery Manager. From the Start screen, type recovery, and then select HP Recovery Manager. Select Recovery Media Creation, and then follow the on-screen instructions. Restore and recovery There are several options for recovering your system. Choose the method that best matches your situation and level of expertise:

Windows offers several options for restoring from backup, refreshing the computer, and resetting the computer to its original state. For more information and steps, see Help and Support. From the Start screen, type help, and then select Help and Support. If you need to correct a problem with a preinstalled application or driver, use the Drivers and Applications Reinstall option of HP Recovery Manager to reinstall the individual application or driver. From the Start screen, type recovery, select HP Recovery Manager, select Drivers and Applications Reinstall, and then follow the on-screen instructions. If you want to reset your computer to its original state, Windows provides an easy way to remove all personal data, apps, and settings, and reinstall Windows. If you want to reset your computer using a minimized image, you can choose the HP Minimized Image Recovery option from the HP Recovery partition (select models only) or HP Recovery media. Minimized Image Recovery installs only drivers and hardware-enabling applications. Other applications included in the image continue to be available for installation through the Drivers and Applications Reinstall option in HP Recovery Manager. For more information, see Recovering using HP Recovery Manager If you want to recover the computer's original factory partitioning and content, you can choose the System Recovery option from the HP Recovery partition (select models only) or use the HP Recovery media that you have created. For more information, see Recovering using HP Recovery Manager. If you have not already created recovery media, see Creating HP Recovery media. 72 Chapter 10 Backing up, restoring, and recovering DRAFT If you have replaced the hard drive, you can use the Factory Reset option of HP Recovery media to restore the factory image to the replacement drive. For more information, see Recovering using HP Recovery Manager. If you wish to remove the recovery partition to reclaim hard drive space, HP Recovery Manager offers the Remove Recovery Partition option. For more information, see Removing the HP Recovery partition. Recovering using HP Recovery Manager HP Recovery Manager software allows you to recover the computer to its original factory state by using the HP Recovery media that you created or by using the HP Recovery partition (select models only). If you have not already created recovery media, see Creating HP Recovery media. Using HP Recovery media, you can choose from one of the following recovery options:

System RecoveryReinstalls the original operating system, and then configures the settings for the programs that were installed at the factory. Minimized Image Recovery (select models only)Reinstalls the operating system and all hardware-related drivers and software, but not other software applications. Factory ResetRestores the computer to its original factory state by deleting all information from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that was installed at the factory. The HP Recovery partition (select models only) allows System Recovery and Minimized Image Recovery. What you need to know HP Recovery Manager recovers only software that was installed at the factory. For software not provided with this computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer. Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues. HP Recovery media must be used if the computer hard drive fails. If you have not already created recovery media, see Creating HP Recovery media. To use the Factory Reset option, you must use HP Recovery media. If you have not already created recovery media, see Creating HP Recovery media. If the HP Recovery media does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before beginning recovery, back up any personal data you wish to retain. Using the HP Recovery partition (select models only) The HP Recovery partition (select models only) allows you to perform a system recovery or minimized image recovery without the need for recovery discs or a recovery USB flash drive. This type of recovery can only be used if the hard drive is still working. To start HP Recovery Manager from the HP Recovery partition:

Restore and recovery 73 DRAFT IMPORTANT: For tablets, connect to the keyboard dock before beginning these steps (select models only). 1. Press f11 while the computer boots. or Press and hold f11 as you press the power button. 2. Choose your keyboard layout. 3. 4. Select Troubleshoot from the boot options menu. Select Recovery Manager, and then follow the on-screen instructions. Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly. 1. 2. If possible, back up all personal files. Insert the HP Recovery disc you created, and then restart the computer. NOTE:

computer boot order. See Changing the computer boot order. Follow the on-screen instructions. If the computer does not automatically restart in HP Recovery Manager, change the 3. Changing the computer boot order If computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection for an optical drive or a USB flash drive. To change the boot order:

1. 2. Restart the computer, quickly press esc, and then press f9 for boot options. 3. 4. Select the optical drive or USB flash drive you want to boot from. Follow the on-screen instructions. Insert the HP Recovery media you created. Removing the HP Recovery partition HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you can no longer use the Windows Refresh option, the Windows option to remove everything and reinstall Windows, or the HP Recovery Manager option. So before you remove the Recovery partition, create HP Recovery media; see Creating HP Recovery media. Follow these steps to remove the HP Recovery partition:

1. 2. From the Start screen, type recovery, and then select HP Recovery Manager. Select Remove Recovery Partition, and then follow the on-screen instructions. 74 Chapter 10 Backing up, restoring, and recovering DRAFT 11 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100240 V, 5060 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer. The computer can operate on DC power within the following specifications. Operating voltage and current varies by platform. Input power Rating Operating voltage and current 19.5 V dc @ 2.31 A 45 W DC plug of external HP power supply NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. NOTE: The computer operating voltage and current can be found on the system regulatory label. Operating environment Factor Temperature Operating Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Metric U.S. 5C to 35C

-20C to 60C 10% to 90%

5% to 95%

41F to 95F

-4F to 140F 10% to 90%

5% to 95%

Operating Nonoperating

-15 m to 3,048 m

-15 m to 12,192 m

-50 ft to 10,000 ft

-50 ft to 40,000 ft Input power 75 DRAFT 12 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contactfor example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:

If removal or installation instructions direct you to unplug the computer, first be sure that it is properly grounded, and then remove the cover. Keep components in their electrostatic-safe containers until you are ready to install them. Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. Use nonmagnetic tools. Before handling components, discharge static electricity by touching an unpainted metal surface of the component. If you remove a component, place it in an electrostatic-safe container. If you need more information about static electricity or assistance with component removal or installation, contact support. 76 Chapter 12 Electrostatic Discharge DRAFT Index A AC adapter light, identifying 6 AC adapter, testing 57 action keys decrease screen brightness 46 Help and Support 46 identifying 12 increase screen brightness 46 keyboard backlight 46 next track or section 46 play, pause, resume 46 previous track or section 46 switch screen image 46 volume down 46 volume mute 46 volume up 46 wireless 46 Adobe Photoshop Lightroom 23 ambient light sensor, identifying 8, 21 antivirus software, using 65 app group, creating 49 apps closing 48 create app group 49 display all 48 display open apps 48 downloading 50 moving 49 resizing 49 searching 49 switching 48 unpinning 49 battery discharging 56 low battery levels 56 battery information, finding 55 battery power 55 Beats Audio 24 Beats Audio Control Panel 24 Beats Audio hot key 24 BIOS determining version 68 downloading an update 69 updating 68 Bluetooth device 16, 20 Bluetooth label 15 boot order, changing HP Recovery Manager 74 bottom 15 buttons left TouchPad 9 power 11 right TouchPad 9 C caps lock light, identifying 10 caring for your computer 60 charms, displaying 49 cleaning your computer 60 close an app 48 components bottom 13 display 8 left side 7 right side 6 top 9 audio features, testing 24 audio-in (microphone) jack, identifying 22 audio-out (headphone) jack, identifying 22 audio-out (headphone) jacks 7 B backing up software and information 67 backups 71 configuring audio for HDMI 26 connecting to a WLAN 19 connector, power 6 corporate WLAN connection 19 critical battery level 56 critical security updates, installing 66 Customize icon 39, 45 D deleted files, restoring 72 digital display device, connecting 27 display all apps 48 display, high-resolution 28 downloading apps 50 Dragon software 47 E edge swipe gestures 44 top-edge swipe 45 editing media 23 electrostatic discharge 76 esc key, identifying 12 external AC power, using 57 F firewall software 66 fn key, identifying 12, 46 fun things to do 2 H hard drive light 7 HDMI port connecting 25 identifying 6, 22 HDMI, configuring audio 26 headphones, connecting 24 Hibernation exiting 54 initiated during critical battery level 56 initiating 54 high-definition devices, connecting 25 high-resolution display 28 hot keys description 46 using 46 HP and third-party software updates, installing 66 HP PC Hardware Diagnostics

(UEFI), downloading 70 HP Recovery Manager correcting boot problems 74 starting 73 Index 77 DRAFT power 10 wireless 10 locking the computer 50 low battery level 56 M memory card reader, identifying 7, 22 microphone, connecting 24 microphones, internal 8, 21 Mini DisplayPort identifying 6 mini DisplayPort connecting 27 Mini DisplayPort, identifying 22 minimized image creating 73 recovery 73 mouse, external setting preferences 29 moving an app 49 mute light, identifying 10 O open apps displaying 48 switching 48 operating environment 75 organize favorites 49 original system recovery 73 R recovery discs 71, 74 HP Recovery Manager 73 media 74 options 71 starting 73 supported discs 71 system 73 USB flash drive 74 using HP Recovery media 72 recovery media creating 71 creating using HP Recovery Manager 72 recovery partition removing 74 recycle computer 72 regulatory information regulatory label 15 wireless certification labels 15 reset computer 72 resize apps 49 restore, Windows File History 72 right control zone, identifying 9 right-edge swipe 44 rotating TouchPad gesture 34 P passwords Setup Utility (BIOS) 64 Windows 64 pinching touch screen gesture 43 pinching TouchPad gesture 32 ports HDMI 6, 22, 25 USB 3.0 7, 22 power button, identifying 11 power connector, identifying 6 power lights, identifying 10 power, battery 55 print 49 product name and number, computer 14 public WLAN connection 19 S save favorites 49 scrolling TouchPad gesture 31 searching 49 security cable lock, installing 67 security cable slot, identifying 7 security, wireless 19 selecting TouchPad gesture 30 serial number 14 service labels, locating 14 setting password protection on wakeup 54 setup of WLAN 18 Setup Utility (BIOS) passwords 64 Setup Utility (BIOS), using 68 shipping the computer 61 shutdown 59 HP Recovery media creating 71 recovery 74 HP Recovery partition recovery 73 removing 74 I input power 75 installing critical security updates 66 optional security cable lock 67 internal display switch, identifying 8 internal microphones, identifying Internet connection setup 18 Internet security software, using 8, 21 65 J jacks audio-in (microphone) 22 audio-out (headphone) 7, 22 K keyboard backlight action key, identifying 46 keyboard hot keys, identifying 46 keys action 12 esc 12 fn 12 Windows 12 Windows applications 12 L labels Bluetooth 15 regulatory 15 serial number 14 service 14 wireless certification 15 WLAN 15 left control zone, identifying 9 left-edge swipe 44 lights AC adapter 6 caps lock 10 hard drive 7 mute 10 78 Index DRAFT Sleep slots exiting 54 initiating 54 memory card reader 7 security cable 7 software updates, installing 66 speakers connecting 23 identifying 13, 22 Start button 47 Start menu 47 supported discs, recovery 71 system recovery 73 system restore point creating 71 T testing an AC adapter 57 testing audio features 24 touch screen gestures 44, 45 edge swipe gestures 44 one-finger slide 42 pinching 43 rotating 43 tapping 41 touch screen, using 41 TouchPad buttons 9 left control zone 9 right control zone 9 TouchPad gestures pinching 32 rotating 34 scrolling 31 selecting 30 zooming 32 TouchPad zone, identifying 9 TPM Embedded Security 65 traveling with the computer 15, 61 turning off the computer 59 U unpinning apps 49 unresponsive system 59 USB 3.0 ports identifying 7, 22 USB 3.0 ports, identifying 6 using external AC power 57 using passwords 63 V vents, identifying 13 video 25 voice navigation 47 W webcam identifying 8, 21 using 22 webcam light, identifying 8, 21 Windows File History 72 reinstall 72 restoring files 72 system restore point 71 Windows applications key, identifying 12 Windows desktop, opening 48 Windows key, identifying 12 Windows passwords 64 Windows shortcut keys 51 Wireless Assistant software 16 wireless button 16 wireless certification label 15 wireless controls button 16 operating system 16 Wireless Assistant software wireless light 10, 16 wireless network (WLAN) connecting 19 corporate WLAN connection 16 19 equipment needed 18 functional range 20 public WLAN connection 19 security 19 using 18 wireless network, securing 66 WLAN antennas, identifying 8 WLAN device 15, 18 WLAN label 15 Z zooming touch screen gesture 43 zooming TouchPad gesture 32 Index 79 DRAFT Regulatory, Safety and Environmental Notices User Guide Copyright 20082011 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. ENERGY STAR is a registered mark owned by the U.S. government. Java is a trademark of Sun Microsystems. Microsoft, Windows, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Third Edition: August 2011 First Edition: February 2011 Document Part Number: 653267-003 Table of contents 1 Regulatory notices .......................................................................................................................................... 1 Federal Communications Commission notice ...................................................................................... 2 Modifications ........................................................................................................................ 2 Cables .................................................................................................................................. 2 Declaration of Conformity for products marked with the FCC logo (United States only) ..... 3 Products with wireless LAN devices or HP Mobile Broadband Modules ............................. 3 Brazil notice .......................................................................................................................................... 4 Canada notices .................................................................................................................................... 4 Avis Canadien ...................................................................................................................................... 4 European Union Regulatory notices ..................................................................................................... 4 Products with HP Mobile Broadband Modules .................................................................... 5 Ergonomics notice ............................................................................................................... 6 Germany ............................................................................................................. 6 Japan notices ....................................................................................................................................... 7 Wireless LAN 802.11b devices ............................................................................................ 7 Wireless LAN 802.11g devices ............................................................................................ 7 Bluetooth devices ................................................................................................................ 7 Wireless LAN, Wireless WAN, and Bluetooth certification markings ................................... 8 South Korea notice ............................................................................................................................... 8 Mexico notice ....................................................................................................................................... 8 Singapore wireless notice .................................................................................................................... 8 Thailand WWAN wireless notice .......................................................................................................... 9 Taiwan notices ..................................................................................................................................... 9 Wireless LAN 802.11a devices ............................................................................................ 9 Wireless LAN 802.11b devices ............................................................................................ 9 Airline travel notice ............................................................................................................................... 9 User-replaceable battery notices ........................................................................................................ 10 ENERGY STAR compliance .............................................................................................................. 10 Laser compliance ............................................................................................................................... 11 Modem notices ................................................................................................................................... 11 Telecommunications device approvals .............................................................................. 11 U.S. modem statements .................................................................................................... 12 iii U.S. modem declarations .................................................................................................. 13 Canada modem statements ............................................................................................... 15 Japan modem statements ................................................................................................. 15 New Zealand modem statements ...................................................................................... 15 Voice support .................................................................................................... 16 Power cord notice ............................................................................................................................... 16 Japan power cord notice .................................................................................................... 16 DC plug of external HP power supply ................................................................................ 17 Macrovision Corporation notice .......................................................................................................... 17 2 Safety notices ................................................................................................................................................ 18 Heat-related safety warning notice ..................................................................................................... 18 Potential safety conditions notice ....................................................................................................... 18 User-replaceable battery notices ........................................................................................................ 18 Headset and earphone volume level notice ....................................................................................... 19 Power cord notices ............................................................................................................................. 19 Cleaning the keyboard ....................................................................................................................... 19 Travel notice ....................................................................................................................................... 19 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................... 19 3 Environmental notices ................................................................................................................................. 20 Electronic hardware and battery recycling ......................................................................................... 20 Disposal of waste equipment by users in private households in the European Union ....................... 20 Chemical substances ......................................................................................................................... 21 China material content declarations ................................................................................................... 21 Japan material content declaration .................................................................................................... 23 Mexico Sustainable Energy Use Law ................................................................................................. 24 Turkey EEE regulation ....................................................................................................................... 24 Ukraine Restriction of Hazardous Substances ................................................................................... 24 Perchlorate materialspecial handling may apply ............................................................................ 24 Index ................................................................................................................................................................... 25 iv 1 Regulatory notices This guide provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. To identify a hardware device such as a wireless LAN (WLAN) network device, choose the procedure below that corresponds to the operating system running on your computer. For Windows XP Professional and Windows XP Home, follow these steps:

1. 2. Select Start > My Computer. If the left pane, select View System Information > Hardware tab > Device Manager. For Windows Vista, follow these steps:

1. 2. Select Start > Computer > System properties. In the left pane, click Device Manager. For later Windows operating systems, such as Windows 7, follow these steps:

Select Start > Control Panel > System and Security > Device Manager. For non-Windows operating systems, follow the instructions provided by your operating system to identify a hardware device such as a wireless LAN (WLAN) network device. Regulatory markings for your country or region may be located on the bottom of the product, either under the battery, under a user-removable door (or some other user-accessible location), or on the wireless or modem module. To view the FCC IDs for any radio modules in your notebook (Bluetooth, WLAN, or WWAN), follow these steps:

1. 2. 3. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. Select the System Configuration menu. The FCC IDs are displayed at the bottom of the screen. 1

CAUTION: Devices not for sale or use in the United States may not have an FCC ID. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. 2 Chapter 1 Regulatory notices Declaration of Conformity for products marked with the FCC logo

(United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. 2. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000 For questions regarding this FCC declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000 or call HP at 281-514-3333 To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 12 inches: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides. To access the user guides, select Start > Help and Support > User Guides. During normal operation of notebook computers with displays greater than 12 inches: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides. To access the user guides, select Start > Help and Support > User Guides. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. Federal Communications Commission notice 3 Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. Avis Canadien Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. European Union Regulatory notices Products bearing the CE marking comply with the following EU Directives:

Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC Ecodesign Directive 2009/125/EC where applicable CE compliance of this product is valid if powered with the correct CE-marked AC adapter provided by HP. If this product has wired and/or wireless telecommunications functionality, it also complies with the essential requirements of EU Directive R&TTE Directive 1999/5/EC. Compliance with these directives implies conformity to applicable harmonized European standards

(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available (in English only) either within the product documentation or at the following Web site: www.hp.eu/certificates (type the product number in the search box). The compliance is indicated by one of the following conformity markings placed on the product:

4 Chapter 1 Regulatory notices For non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth, within power class below 10 mW. For EU non-harmonized telecommunications products (if applicable, a 4-digit notified body number is inserted between CE and ! (the exclamation mark). Please refer to the regulatory label provided on the product. The telecommunications functionality of this product may be used in the following EU and EFTA countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. The telephone connector (not available for all products) is intended for connection to analog telephone networks. NOTE: For products with wireless LAN devices, some countries may have specific obligations or special requirements about the operation of wireless LAN networks such as indoor use only or restrictions of the channels available. Be sure that the country settings of the wireless network are correct. In France, certain restrictions apply for the 2.4-GHz wireless LAN operation of this product. This product may be used indoors for the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 to 13). For outdoor use, only the 2400-MHz to 2454-MHz frequency band (channels 1 to 7) may be used. For the latest requirements, see http://www.arcep.fr. The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, GERMANY. Products with HP Mobile Broadband Modules THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY RADIATION. The HP Mobile Broadband Module in your notebook is a radio transmitter and receiver. The device is designed not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines that establish permitted levels of RF radiation for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The device also meets the European R&TTE directives, including the protection of the health and the safety of the user and any other person. European Union Regulatory notices 5 The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the notebook computer, this device meets RF exposure guidelines when the antennas are positioned at a minimum distance from the body. In order to transmit data or messages, this device requires a quality connection to the network. In some cases, transmission of data or messages may be delayed until such a connection becomes available. Be sure that the recommended distance is observed until the transmission is complete.

*The non-FCC, international guidelines state that the SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. This equipment incorporates a radio transmitting device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. Ergonomics notice Germany Mobile computers bearing the "GS" approval mark meet the ergonomic requirements and are suitable only for short-time use of VDU tasks. When a mobile computer is used for display work tasks where the Visual Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000:2008 This device is intended for use at visual display workplaces in compliance with BildscharbV, only with external keyboard and adequate external monitor. During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur which result in reduced readability. Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG

(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. Ref: EK1-ITB 2000:2008 Das Gert ist fr die Benutzung am Bildschirmarbeitsplatz gem BildscharbV nur mit externer Tastatur und geeignetem Monitor vorgesehen. 6 Chapter 1 Regulatory notices Bei mobiler Nutzung mit ungnstigen Lichtverhltnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschrnkungen der Lesbarkeit der dargestellten Zeichen kommen. Japan notices Wireless LAN 802.11b devices Wireless LAN 802.11g devices Bluetooth devices Japan notices 7 Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. South Korea notice Mexico notice La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) este equipo puede que no cause interferencia y (2) este equipo debe aceptar cualquier interferencia, incluyendo interferencia que pueda ser causada por la operacin no deseada. Singapore wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. 8 Chapter 1 Regulatory notices Thailand WWAN wireless notice This telecom equipment has complied with NTC regulations. Taiwan notices Wireless LAN 802.11a devices Wireless LAN 802.11b devices Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. Thailand WWAN wireless notice 9 User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general in household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP Web site at http://www.hp.com/recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. ENERGY STAR compliance As an ENERGY STAR Partner, Hewlett-Packard Company has followed the EPAs enhanced product qualification and certification process to ensure that the products marked with the ENERGY STAR logo are ENERGY STAR qualified per the applicable ENERGY STAR guidelines for energy efficiency. The following logo appears on all ENERGY STAR-qualified computers:

The ENERGY STAR program for computers was created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way that products achieve this goal is by using the Microsoft Windows power management feature to reduce power consumption when the product is not in use. The power management feature allows the computer to initiate a low-power or Sleep mode after a period of user inactivity. When used with an external ENERGY STAR qualified monitor, this feature also supports similar power management features of the monitor. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power:

Turn off the display after 15 minutes Initiate Sleep after 30 minutes The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. 10 Chapter 1 Regulatory notices Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007. Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. Laser compliance 11 U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. 12 Chapter 1 Regulatory notices U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

Modem notices 13 14 Chapter 1 Regulatory notices Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. Modem notices 15 c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japan power cord notice 16 Chapter 1 Regulatory notices DC plug of external HP power supply NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. NOTE: The computer operating voltage and current can be found on the system regulatory label. Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Macrovision Corporation notice 17 2 Safety notices Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). Potential safety conditions notice If you notice any of the following conditions (or if you have other safety concerns), do not use the computer: crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance. User-replaceable battery notices WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. WARNING! Keep the battery away from children. WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. 18 Chapter 2 Safety notices Headset and earphone volume level notice WARNING! Listening to music at high volume levels and for extended durations can damage ones hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same. Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution. For your own safety, headsets or earphones used with this product should comply with the headphone limits in EN 50332-2. If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1. Power cord notices WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. Cleaning the keyboard WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system. Headset and earphone volume level notice 19 3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. Disposal of waste equipment by users in private households in the European Union This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service. 20 Chapter 3 Environmental notices Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. China material content declarations The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Part Name Battery Cables Camera Chassis/Other Flash memory card reader Toxic and Hazardous Substances and Elements Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O Chemical substances 21 Toxic and Hazardous Substances and Elements Part Name Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Remote control Smart card/Java card reader Speakers, external TV tuner USB flash memory drive USB hub Web camera Wireless receiver Wireless cards Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment and its amendments. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity. 22 Chapter 3 Environmental notices Japan material content declaration A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950. Japan material content declaration 23 Mexico Sustainable Energy Use Law This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). Turkey EEE regulation In Conformity with the EEE regulation EEE Ynetmeliine Uygundur Ukraine Restriction of Hazardous Substances The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.

, 3 2008 1057. Perchlorate materialspecial handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. 24 Chapter 3 Environmental notices Index A airline travel notice 9 B battery notice 10, 18, 24 battery recycling 20 Brazil notice 4 C cable grounding notice 19 Canada modem statement 15 Canada notices 4 Canadian French notices 4 China Material Content Declarations 21 D DC plug of external HP power supply notice 17 Declaration of Conformity 3 disposal notices battery 24 battery, user replacement 10 equipment 20 E electronic hardware and battery recycling 20 ENERGY STAR compliance 10 environmental notices 20 equipment disposal notice 20 ergonomics notice 6 European Union notices 4 F Federal Communications Commission cables 2 modifications 2 notice 2 G GS Notice 6 H hardware device, identifying 1 headset and earphone volume level notice 19 J Japan material content declaration 23 Japan modem statement 15 Japan notice 7 Japan power cord notice 16 K keyboard notice 19 L laser safety notice 11 M Macrovision Corporation notice Mexico Sustainable Energy Use 17 Law 24 Mexico wireless notice 8 modem notices 11 modem statements Canada 15 Japan 15 New Zealand 15 U.S. 12 modifications, Federal Communications Commission 2 notices airline travel 9 battery 10, 24 battery, user replacement 18 Brazil 4 Canada 4 Canadian French 4 DC plug of external HP power supply 17 environmental 20 equipment disposal 20 ergonomics 6 European Union 4 Federal Communications Commission 2 headset and earphone volume level 19 Japan 7 Japan power cord 16 keyboard 19 laser safety 11 Macrovision Corporation 17 Mexico 8 modem 11 perchlorate material 24 power cords 16, 19 Singapore 8 South Korea 8 Taiwan 9 Thailand WWAN wireless notice 9 travel 19 Ukraine restriction of hazardous substances 24 N New Zealand modem statement 15 P power cord notice 16, 19 Index 25 R recycling, electronic hardware and battery 20 S Singapore wireless notice 8 South Korea notice 8 T Taiwan notice 9 Thailand WWAN wireless notice travel notice 19 TV tuner, cable grounding notice 9 19 U U.S. modem statement 12 Ukraine restriction of hazardous substances notice 24 V voice support 16 volume level notice, headset and earphone 19 W wireless LAN devices 3 26 Index Informations sur les rglementations, la scurit et les conditions d'utilisation Manuel de l'utilisateur Copyright 2012 Hewlett-Packard Development Company, L.P. Bluetooth est une marque dtenue par son propritaire et utilise sous licence par Hewlett-Packard Company. ENERGY STAR est une marque dpose du gouvernement des tats-Unis. Java est une marque dpose de Sun Microsystems. Microsoft, Windows et Windows Vista sont des marques dposes de Microsoft Corporation aux tats-Unis. Les informations contenues dans ce document peuvent tre modifies sans pravis. Les garanties relatives aux produits et aux services HP sont dcrites dans les dclarations de garantie limite expresse qui les accompagnent. Aucun lment du prsent document ne peut tre interprt comme constituant une garantie supplmentaire. HP ne saurait tre tenu pour responsable des erreurs ou omissions de nature technique ou rdactionnelle qui pourraient subsister dans le prsent document. Troisime dition : septembre 2012 Deuxime dition : juillet 2012 Premire dition : mars 2012 Rfrence du document : 689409-053 propos de ce manuel Ce manuel fournit des informations sur les rglementations, la scurit et les conditions d'utilisation en conformit avec les rglementations amricaines, canadiennes et internationales en matire d'ordinateurs portables, d'ordinateurs de bureau, de clients lgers et de stations de travail personnelles. AVERTISSEMENT ! Le non-respect des instructions expose l'utilisateur des risques potentiellement trs graves. ATTENTION : Le non-respect des instructions prsente des risques, tant pour le matriel que pour les informations qu'il contient. REMARQUE : Le texte ainsi dfini fournit des informations importantes supplmentaires. iii iv propos de ce manuel Sommaire 1 Avis de rglementation sur les ordinateurs portables ................................................................................ 1 Rglementation FCC ............................................................................................................................ 3 Modifications ........................................................................................................................ 3 Cbles .................................................................................................................................. 3 Dclaration de conformit des produits portant le logo FCC (tats-Unis uniquement) ....... 4 Produits avec appareils sans fil LAN ou modules HP Mobile Broadband ........................... 4 Avis pour le Brsil ................................................................................................................................. 5 Avis pour le Canada ............................................................................................................................. 5 Avis pour l'Union europenne .............................................................................................................. 6 Dclaration de conformit .................................................................................................... 6 Produits quips de modules sans fil (EMF) ....................................................... 7 Dclaration relative au rseau tlphonique europen (modem/fax) ................. 7 Avis sur l'ergonomie ............................................................................................ 8 Allemagne (texte en franais) ............................................................. 8 Allemagne (texte en allemand) ........................................................... 8 Avis pour le Japon ................................................................................................................................ 9 Priphriques LAN, priphriques WAN et marques de certification pour les priphriques Bluetooth ..................................................................................................... 10 Avis pour la Core du Sud ................................................................................................................. 10 Avis pour le Mexique .......................................................................................................................... 10 Avis sur les appareils sans fil pour Singapour .................................................................................... 11 Avis sur les appareils sans fil WWAN pour la Thalande ................................................................... 11 Avis pour Tawan ................................................................................................................................ 11 Priphriques WLAN 802.11a ........................................................................................... 11 Priphriques WLAN 802.11b ........................................................................................... 12 Avis sur les utilisations en vol ............................................................................................................. 12 Avis sur les batteries remplaables par l'utilisateur ............................................................................ 12 Conformit ENERGY STAR ............................................................................................................ 12 Conformit du laser ............................................................................................................................ 13 Avis sur les modems .......................................................................................................................... 14 Homologations des priphriques de tlcommunication ................................................. 14 Avis sur les modems pour les tats-Unis .......................................................................... 14 v Dclarations sur les modems pour les tats-Unis ............................................................. 16 Avis sur les modems pour le Canada ................................................................................ 17 Avis sur les modems pour le Japon ................................................................................... 17 Avis sur les modems pour la Nouvelle-Zlande ................................................................ 17 Support vocal .................................................................................................... 18 Avis sur les cordons d'alimentation .................................................................................................... 18 Avis sur les cordons d'alimentation pour le Japon ............................................................. 18 Prise CC de la source d'alimentation externe HP .............................................................. 18 Avis de Macrovision Corporation ........................................................................................................ 19 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles ...................................................................................................................................................... 20 Avis sur les modems .......................................................................................................................... 20 Homologations des priphriques de tlcommunication ................................................. 20 Avis sur les modems pour les tats-Unis .......................................................................... 21 Avis sur les modems pour le Canada ................................................................................ 22 Avis sur les modems pour le Japon ................................................................................... 22 Avis sur les modems pour la Nouvelle-Zlande ................................................................ 22 Assistance vocale ............................................................................................. 23 Avis de compatibilit lectromagntique ............................................................................................ 23 Avis de la FCC ................................................................................................................... 24 Modifications ..................................................................................................... 24 Cbles ............................................................................................................... 24 Dclaration de conformit pour les produits portant le logo FCC (tats-Unis uniquement) ...................................................................................................... 25 Produits quips de priphriques LAN sans fil ............................................... 25 Dclaration sur les tlcommunications pour l'Australie ................................................... 25 Avis pour le Brsil .............................................................................................................. 26 Avis pour le Canada .......................................................................................................... 26 Avis pour l'Union europenne ............................................................................................ 26 Dclaration de conformit ................................................................................. 26 Produits quips de modules sans fil ............................................... 27 Dclaration relative au rseau tlphonique europen (modem/

fax) .................................................................................................... 28 Avis sur l'ergonomie ......................................................................... 28 Avis pour le Japon ............................................................................................................. 28 Marques de certification des priphriques WLAN et Bluetooth ....................... 29 Avis pour la Core du Sud ................................................................................................. 29 Avis pour le Mexique ......................................................................................................... 30 Avis pour Tawan ............................................................................................................... 30 vi 3 Avis de scurit pour les ordinateurs portables ....................................................................................... 31 Notice d'avertissement relative la chaleur ....................................................................................... 31 Avis sur les risques lis la scurit .................................................................................................. 31 Avis sur les batteries remplaables par l'utilisateur ............................................................................ 32 Avis sur le niveau du volume du casque et des couteurs ................................................................ 32 Avis sur les cordons d'alimentation .................................................................................................... 33 Nettoyage du clavier ........................................................................................................................... 33 Avis sur les dplacements .................................................................................................................. 33 Avis de scurit pour la Chine ............................................................................................................ 34 Chine : avis sur l'altitude .................................................................................................... 34 Chine : avis sur une utilisation dans des conditions tropicales .......................................... 34 Norvge et Sude : notice de mise la terre des cbles pour les produits quips d'un tuner TV ... 34 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles ...................................................................................................................................................... 35 Informations importantes relatives la scurit ................................................................................. 35 Conditions d'installation ...................................................................................................................... 36 Avis sur le remplacement de la batterie ............................................................................................. 36 Avis sur le volume des casques et des couteurs ............................................................................. 37 Informations de scurit relatives au laser ......................................................................................... 37 Exigences relatives au bloc d'alimentation et au cordon d'alimentation ............................................. 37 Exigences relatives la mise la terre des alimentations de classe 1 ............................. 37 Danemark .......................................................................................................... 38 Finlande ............................................................................................................ 38 Norvge ............................................................................................................. 38 Sude ................................................................................................................ 38 Exigences relatives l'alimentation ................................................................................... 38 Pour une utilisation en Norvge ........................................................................ 38 Cordons d'alimentation requis ........................................................................................... 39 Spcifications du cordon d'alimentation pour le Japon ...................................................... 39 Risque de pincement .......................................................................................................................... 39 Avis de scurit pour la Chine ............................................................................................................ 40 Chine : avis sur l'altitude .................................................................................................... 40 Chine : avis sur une utilisation dans des conditions tropicales .......................................... 40 Avis d'acoustique pour l'Allemagne .................................................................................................... 41 5 Avis sur les conditions d'utilisation pour les ordinateurs portables ...................................................... 42 Recyclage du matriel lectronique et de la batterie ......................................................................... 42 Mise au rebut des quipements par les utilisateurs ........................................................................... 42 Substances chimiques ....................................................................................................................... 42 Avis sur l'environnement pour la Chine .............................................................................................. 43 vii Avis sur la restriction des substances dangereuses pour la Chine (RoHS) ....................................... 43 Dclaration de contenu de l'quipement pour le Japon ..................................................................... 46 Loi du Mexique sur l'utilisation durable de l'nergie ........................................................................... 46 Rglementation EEE de la Turquie .................................................................................................... 46 Restriction d'utilisation de substances dangereuses pour l'Ukraine ................................................... 46 Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire ................... 46 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles .......................................................................................................................................... 47 Recyclage du matriel lectronique et des batteries .......................................................................... 47 Mise au rebut des quipements par les utilisateurs ........................................................................... 47 Conformit ENERGY STAR (certains modles) .............................................................................. 47 Substances chimiques ....................................................................................................................... 49 Avis sur le mercure ............................................................................................................................. 49 Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire ................... 49 Avis sur la restriction des substances dangereuses pour la Chine (RoHS) ....................................... 49 The Table of Toxic and Hazardous Substances/Elements and their Content ................... 50 Dclarations IT ECO .......................................................................................................................... 51 Avis sur la restriction des substances dangereuses pour le Japon (RoHS) ....................................... 52 Ley para el Aprovechamiento Sustentable de la Energa de Mxico (loi du Mexique sur l'utilisation durable de l'nergie) ......................................................................................................... 52 Rglementation EEE de la Turquie .................................................................................................... 52

(restriction d'utilisation de substances dangereuses pour l'Ukraine) .............................................................................................................. 53 Index ................................................................................................................................................................... 54 viii 1 Avis de rglementation sur les ordinateurs portables Ce chapitre fournit des avis de rglementation spcifiques des pays et des rgions concernant les produits filaires et sans fil, ainsi que des informations de conformit concernant l'ordinateur. Certains de ces avis peuvent ne pas s'appliquer votre produit. Un ou plusieurs priphriques sans fil intgrs peuvent tre installs. Dans certains environnements, l'utilisation d'appareils sans fil peut tre limite. Ces restrictions peuvent s'appliquer dans les avions, dans les hpitaux, proximit d'explosifs, dans des lieux dangereux, etc. Si vous n'tes pas sr des rgles qui s'appliquent ce produit, demandez si vous pouvez l'utiliser avant de le mettre sous tension. Pour identifier un priphrique matriel, tel qu'un priphrique rseau LAN sans fil (WLAN), choisissez la procdure ci-dessous qui correspond au systme d'exploitation excut sur votre ordinateur. Sous Windows Vista, procdez comme suit :

1. Slectionnez Dmarrer > Ordinateur > Proprits systme. 2. Dans le volet gauche, cliquez sur Gestionnaire de priphriques. Sous Windows 7, procdez comme suit :

Slectionnez Dmarrer > Panneau de configuration > Systme et scurit > Gestionnaire de priphriques. Sous Windows 8, procdez comme suit :

1. Dans l'cran d'accueil, tapez c, puis slectionnez Panneau de configuration. 2. Slectionnez Systme et scurit, puis slectionnez Gestionnaire de priphriques dans la zone Systme. La liste de tous les priphriques installs sur votre ordinateur s'affiche. Pour les systmes d'exploitation non Windows, suivez les instructions fournies par votre systme d'exploitation pour identifier un priphrique matriel tel qu'un priphrique rseau LAN sans fil

(WLAN). Des tiquettes de rglementation spcifiques votre pays ou rgion peuvent tre apposes sous le produit : sous la batterie, sous une trappe accessible par l'utilisateur (ou tout autre emplacement accessible par l'utilisateur), sur le module sans fil ou sur le modem. 1 Sous Windows 7, pour consulter le numro d'identification FCC d'un module radio de votre ordinateur portable (par exemple, Bluetooth, WLAN ou WWAN), procdez comme suit :

1. 2. 3. Allumez ou redmarrez l'ordinateur puis appuyez sur echap lorsque le message Press the ESC key for Startup Menu (Pour accder au menu de dmarrage, appuyez sur la touche echap) s'affiche en bas de l'cran. Appuyez sur f10 pour accder au BIOS. Slectionnez le menu System Configuration (Configuration du systme). Sous Windows 8, procdez comme suit :

1. Mettez l'ordinateur sous tension ou redmarrez-le, puis appuyez sur la touche echap lorsque le message Press the ESC key for Startup Menu (Pour accder au menu de dmarrage, appuyez sur la touche echap) apparat en bas de l'cran. 2. Appuyez sur f10 pour accder Computer Setup. Les identifiants FCC sont affichs en bas de l'cran. ATTENTION : Les appareils qui ne sont pas destins la vente ou une utilisation aux tats-Unis ne possdent peut-tre pas d'identifiants FCC. 2 Chapitre 1 Avis de rglementation sur les ordinateurs portables Rglementation FCC Le prsent quipement a t test et dclar conforme aux limites d'un appareil numrique de Classe B, telles que dfinies dans l'article 15 des rglementations FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences prjudiciables dans un environnement rsidentiel. Le prsent quipement gnre, utilise et peut mettre une nergie de radiofrquence et, s'il n'est pas install et utilis conformment aux instructions, peut entraner des interfrences prjudiciables pour les radiocommunications. Cependant, tout risque d'interfrences ne peut tre totalement exclu dans certains environnements spcifiques. Si ce matriel devait provoquer des interfrences avec une radio ou un tlviseur, ce qu'il est facile de dceler en teignant puis en rallumant ce matriel, il est alors vivement conseill l'utilisateur d'essayer de supprimer ces interfrences en prenant une ou plusieurs des mesures suivantes :

Rorienter ou repositionner l'antenne de rception. loigner le matriel informatique du rcepteur. Brancher le matriel informatique sur la prise d'un circuit autre que celui sur lequel est branch le rcepteur. Demander conseil un revendeur ou un technicien de radio ou de tlvision expriment. Modifications La FCC stipule que l'utilisateur doit tre inform que toute modification opre sur l'appareil, n'ayant pas t expressment approuve par HP, peut entraner l'annulation des droits d'exploitation du produit dont bnficie l'utilisateur. Cbles Pour tre conformes la rglementation de la FCC, les connexions d'entre de l'appareil doivent tre tablies avec des cbles blinds munis d'embouts de connecteurs RFI/EMI mtalliques. Rglementation FCC 3 Dclaration de conformit des produits portant le logo FCC (tats-Unis uniquement) Cet appareil est conforme l'article 15 des rglementations FCC. Son utilisation est soumise aux deux conditions suivantes :

1. Cet appareil ne doit pas provoquer d'interfrences nuisibles. 2. Cet appareil doit accepter toutes interfrences reues, notamment des interfrences pouvant provoquer un fonctionnement non voulu. Si vous souhaitez poser des questions sur le produit qui ne sont pas en rapport avec cette dclaration, crivez l'adresse suivante :

Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000, tats-Unis Pour toute question concernant cette dclaration FCC, crivez-nous l'adresse suivante :

Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000, tats-Unis ou appelez HP au (281) 514-3333. Pour identifier le produit, reportez-vous au numro de rfrence, de srie ou de modle inscrit sur le produit. Produits avec appareils sans fil LAN ou modules HP Mobile Broadband Cet appareil ne doit pas tre situ proximit d'une autre antenne ou d'un metteur, ni fonctionner en mme temps. AVERTISSEMENT ! Exposition aux rayonnements de frquence radio La puissance de sortie mise par cet appareil est nettement infrieure aux limites d'exposition aux frquences radio dictes par le FCC. Toutefois, l'appareil doit tre utilis de sorte que les possibilits de contact humain soient rduites au maximum pendant le fonctionnement normal des tablettes et des ordinateurs portables. Pendant le fonctionnement normal de tablettes et d'ordinateurs portables dont les crans sont infrieurs ou gaux 30,5 cm (12 pouces) : pour viter de dpasser les limites d'expositions aux frquences radio dictes dans la rglementation FCC, il est prfrable de ne pas s'approcher plus de 2,5 cm (1 pouce) de l'antenne. Pour identifier l'emplacement des antennes sans fil, reportez-vous aux manuels de l'utilisateur qui accompagnent votre ordinateur. Pendant le fonctionnement normal d'ordinateurs portables dont les crans sont suprieurs 30,5 cm

(12 pouces) : Pour viter tout risque de dpassement des limites d'exposition aux frquences radio dictes par la FCC, les antennes ne doivent pas se trouver moins de 20 cm (8 pouces) de l'utilisateur, y compris lorsque l'cran de l'ordinateur est ferm. Pour identifier l'emplacement des antennes sans fil, reportez-vous aux manuels de l'utilisateur qui accompagnent votre ordinateur. 4 Chapitre 1 Avis de rglementation sur les ordinateurs portables ATTENTION : Lorsque vous utilisez un rseau local sans fil IEEE 802.11a, abstenez-vous d'utiliser ce matriel l'extrieur. En effet, il fonctionne dans la plage de frquences allant de 5,15 5,25 GHz. La FCC exige que ce matriel soit utilis l'intrieur pour la plage de frquences comprise entre 5,15 et 5,25 GHz, afin de rduire les risques d'interfrence avec les systmes de satellites du service mobile du canal commun. Un radar puissance leve est allou comme premier utilisateur des bandes de frquence allant de 5,25 5,35 GHz et de 5,65 5,85 GHz. Ces stations radar peuvent entraner des interfrences avec cet appareil et/ou l'endommager. Avis pour le Brsil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Avis pour le Canada Cet appareil numrique de Classe B respecte toutes les exigences des rglementations canadiennes sur les quipements pouvant causer des interfrences. Si ce priphrique est quip de fonctions WLAN ou Bluetooth, il est conforme aux normes RSS exemptes de licence dictes par Industry Canada. Son fonctionnement est soumis deux conditions : (1) ce priphrique ne doit pas gnrer d'interfrence et (2) ce priphrique doit supporter toutes les interfrences reues, y compris les interfrences qui pourraient entraner un mauvais fonctionnement. AVERTISSEMENT ! Exposition aux radiations de frquence radio : la puissance de rayonnement de cet appareil est infrieure aux limites d'exposition aux radiations mises par les frquences radio dictes par Industrie Canada. Toutefois, l'appareil doit tre utilis de sorte que les possibilits de contact humain soient rduites au maximum pendant son fonctionnement normal. Pendant le fonctionnement normal de tablettes et d'ordinateurs portables dont les crans sont infrieurs ou gaux 30,5 cm (12 pouces) : pour viter de dpasser les limites d'exposition aux frquences radio dictes par Industrie Canada, il est prfrable de ne pas s'approcher plus de 2,5 cm (1 pouce) de l'antenne. Pour identifier l'emplacement des antennes sans fil, reportez-vous aux manuels de l'utilisateur qui accompagnent votre ordinateur. Pendant le fonctionnement normal d'ordinateurs portables dont les crans sont suprieurs 30,5 cm

(12 pouces) : pour viter tout risque de dpassement des limites d'exposition aux frquences radio dictes par Industrie Canada, les antennes ne doivent pas se trouver moins de 20 cm (8 pouces) de l'utilisateur, y compris lorsque l'cran de l'ordinateur est ferm. Pour identifier l'emplacement des antennes sans fil, reportez-vous aux manuels de l'utilisateur qui accompagnent votre ordinateur. ATTENTION : Lorsque vous utilisez un rseau local sans fil IEEE 802.11a, abstenez-vous d'utiliser ce matriel l'extrieur. En effet, il fonctionne dans la plage de frquences allant de 5,15 5,25 GHz. Industrie Canada exige que ce matriel soit utilis l'intrieur pour la plage de frquences comprise entre 5,15 et 5,25 GHz, afin de rduire les risques d'interfrence avec les systmes de satellites du service mobile du canal commun. Un radar puissance leve est allou comme premier utilisateur des bandes de frquence allant de 5,25 5,35 GHz et de 5,65 5,85 GHz. Ces stations radar peuvent entraner des interfrences avec cet appareil et/ou l'endommager. Les antennes de ce priphrique ne sont pas remplaables. Toute tentative d'accs par l'utilisateur endommagera l'ordinateur. Avis pour le Brsil 5 Avis pour l'Union europenne Dclaration de conformit Les produits portant la marque CE sont conformes une ou plusieurs directives de l'UE suivantes, le cas chant :

Directive relative la basse tension 2006/95/CE Directive EMC 2004/108/CE Directive Ecodesign 2009/125/CE Directive R&TTE 1999/5/CE Directive RoHS 2011/65/CE La conformit CE de ce produit est uniquement valable si ce dernier est aliment par un adaptateur secteur estampill CE (le cas chant) et un cordon d'alimentation fournis par HP. Reportez-vous la section Cordons d'alimentation requis la page 39. La conformit ces directives implique la conformit aux normes europennes harmonises applicables (normes europennes) qui sont prsentes dans la dclaration de conformit de l'UE dicte par HP pour ce produit ou cette gamme de produits et disponibles soit dans la documentation du produit soit sur le site Web suivant : www.hp.eu/certificates (effectuez une recherche partir du nom de modle du produit ou de son numro de produit, accessible sur l'tiquette de conformit). La conformit est reprsente par la marque de conformit CE ci-aprs. Pour certains produits de tlcommunications, le numro 4 chiffres d'un organisme de certification peut tre ajout en suffixe. Reportez-vous l'tiquette de conformit appose sur le produit. La fonctionnalit de tlcommunications de ce produit peut tre utilise dans les pays de l'Union europenne et de l'AELE suivants : Allemagne, Autriche, Belgique, Bulgarie, Chypre, Danemark, Espagne, Estonie, Finlande, France, Grce, Hongrie, Irlande, Islande, Lettonie, Liechtenstein, Lituanie, Luxembourg, Malte, Norvge, Pays-Bas, Pologne, Portugal, Rpublique tchque, Roumanie, Royaume-Uni, Slovaquie, Slovnie, Sude et Suisse. Pour toute question portant sur les rglementations, contactez Hewlett-Packard GmbH, Dept./MS cette adresse : HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, ALLEMAGNE. 6 Chapitre 1 Avis de rglementation sur les ordinateurs portables Produits quips de modules sans fil (EMF) CET APPAREIL EST CONFORME AUX NORMES INTERNATIONALES EN MATIRE D'EXPOSITION AUX RAYONNEMENTS DE FRQUENCE RADIO. Le module sans fil intgr votre ordinateur portable est un metteur et rcepteur radio. Cet appareil est conu pour ne pas dpasser les limites d'exposition aux frquences radio dfinies par des directives internationales (ICNIRP). Ces limites sont dfinies dans le cadre de directives qui tablissent les niveaux autoriss de rayonnements de frquence radio pour l'ensemble de la population. Ces directives, dictes par des organismes scientifiques indpendants, s'appuient sur une valuation rgulire et minutieuse de diffrentes tudes scientifiques. Cet appareil est galement conforme aux directives R&TTE europennes relatives la protection de la sant et de la scurit des personnes. La norme d'exposition dfinie pour les appareils mobiles utilise une unit de mesure appele SAR

(Specific Absorption Rate, taux d'absorption spcifique).* Ce taux a t obtenu via des tests au cours desquels les appareils ont effectu des transmissions au niveau de puissance certifi le plus lev, dans toutes les bandes de frquence. Le taux SAR rel de l'appareil en cours de fonctionnement peut tre bien infrieur la valeur maximale dfinie, dans la mesure o il fonctionne diffrents niveaux de puissance et utilise uniquement la puissance requise pour atteindre le rseau. Install dans l'ordinateur portable, cet appareil est conforme aux directives en matire d'exposition aux frquences radio lorsque les antennes se trouvent une distance minimale du corps. Pour transmettre des donnes ou des messages, l'appareil doit disposer d'une connexion de qualit au rseau. Dans certains cas, les transmissions de donnes ou de messages peuvent tre retardes jusqu' ce qu'une connexion soit disponible. Veillez respecter la distance conseille jusqu' la fin de la transmission.

*Les directives internationales autres que celles de la FCC indiquent que la limite SAR pour les appareils mobiles utiliss par le grand public est de 2 watts/kilogramme (W/kg), calcul sur une moyenne de 10 grammes de masse tissulaire. Ces directives incluent une marge de scurit importante pour une protection accrue du grand public et pour tenir compte des variations dans les mesures. Les valeurs SAR peuvent varier selon les exigences locales en matire de reporting et selon la bande du rseau. Cet quipement intgre un appareil de transmission et rception radiolectrique. Lors d'une utilisation standard, l'observation d'une distance de sparation de 20 cm permet aux niveaux d'exposition des frquences radio de respecter la conformit des normes australiennes et no-zlandaises. Dclaration relative au rseau tlphonique europen (modem/fax) Le produit ci-joint est conforme aux spcifications de la directive 1999/5/CE (annexe II) sur les quipements hertziens et quipements terminaux de tlcommunications et porte en consquence la marque CE. Cependant, des diffrences existant entre les rseaux tlphoniques publics commuts

(RTPC) nationaux prsents dans les diffrents pays/rgions, cette homologation en elle-mme ne garantit pas la russite de toutes les oprations sur tous les points de terminaison du RTPC. En cas de problme, prenez contact avec le fournisseur auprs duquel vous vous tes procur votre quipement. L'quipement a t conu pour fonctionner avec les rseaux DTMF analogiques. Cet quipement peut connatre des difficults d'interconnexion sur les rseaux RTPC prenant uniquement en charge la composition impulsions. Contactez votre oprateur rseau pour bnficier d'une aide supplmentaire. Avis pour l'Union europenne 7 Avis sur l'ergonomie Allemagne (texte en franais) Lorsqu'un ordinateur portable est utilis sur une station de travail professionnelle dans le cadre d'un travail sur cran de visualisation o la directive 90/270/CEE relative aux crans de visualisation est applicable, un clavier externe adapt est recommand. Selon l'application et le travail ralis, un moniteur externe adapt peut galement tre ncessaire pour obtenir des conditions de travail comparables celles d'une station de travail. Rf : EK1-ITB 2000 (certification GS volontaire) Les ordinateurs portables portant la marque d'homologation GS sont conformes aux exigences en matire d'ergonomie. Sans clavier externe, ils sont uniquement adapts aux tches ponctuelles sur cran de visualisation. Une utilisation mobile dans de mauvaises conditions de luminosit (par exemple, lumire directe du soleil) peut occasionner des reflets et donc rduire la lisibilit. Allemagne (texte en allemand) Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG

(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. Rf : EK1-ITB 2000 (freiwillige GS Zertifizierung) Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Bei mobiler Nutzung mit ungnstigen Lichtverhltnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschrnkungen der Lesbarkeit der dargestellten Zeichen kommen. 8 Chapitre 1 Avis de rglementation sur les ordinateurs portables Avis pour le Japon Avis pour le Japon 9 Priphriques LAN, priphriques WAN et marques de certification pour les priphriques Bluetooth This product contains certified radio equipment. Avis pour la Core du Sud Avis pour le Mexique Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Si su producto se brinda con accesorios inalmbricos como un teclado o un mouse y necesita identificar el modelo del accesorio, consulte la etiqueta incluida en ese accesorio. 10 Chapitre 1 Avis de rglementation sur les ordinateurs portables Avis sur les appareils sans fil pour Singapour Mettez hors tension les priphriques WWAN lorsque vous tes bord d'avions. L'utilisation de ces appareils bord d'avions est illgale, peut tre dangereuse pour le fonctionnement de l'avion et risque de perturber le rseau de tlphonie mobile. Le non-respect de cette instruction peut entraner la suspension ou le refus de services cellulaires au contrevenant, ou des actions juridiques, ou les deux. Les utilisateurs doivent limiter l'emploi d'quipement radio dans des dpts de carburant, usines chimiques et l o des explosions sont en cours. Comme pour les autres quipements mobiles de transmission par frquences radiolectriques, il est recommand aux utilisateurs, pour le bon fonctionnement de leur quipement et pour la scurit du personnel, de ne pas trop approcher les antennes du corps humain au cours du fonctionnement de l'quipement. Ce priphrique a t conu pour tre conforme aux exigences applicables pour l'exposition aux ondes radio, en fonction de normes scientifiques qui comprennent des plages destines assurer la scurit de tout le monde, quel que soit l'ge et l'tat de sant. Ces rgles d'exposition aux ondes radio utilisent une unit de mesure appele taux d'absorption spcifique (SAR - Specific Absorption Rate). Les tests relatifs aux taux d'absorption sont mens l'aide de mthodes standardises, le tlphone transmettant son niveau de certifi le plus lev dans toutes les bandes de frquences utilises. Les informations de donnes SAR se basent sur les normes EN50360 et EN50361 de CENELEC, qui utilisent la limite de 2 watts par kilogramme, sur une moyenne de 10 grammes de tissu. Avis sur les appareils sans fil WWAN pour la Thalande Cet quipement de tlcommunications est conforme aux rglementations de la NTC. Avis pour Tawan Priphriques WLAN 802.11a Avis sur les appareils sans fil pour Singapour 11 Priphriques WLAN 802.11b Avis sur les utilisations en vol L'utilisation d'quipement lectronique bord d'un avion commercial est laisse la discrtion de la compagnie arienne. Avis sur les batteries remplaables par l'utilisateur Lorsqu'une batterie atteint la fin de sa vie utile, ne la jetez pas avec les dchets mnagers ordinaires. Appliquez les lois et rglementations locales en matire de mise au rebut des batteries d'ordinateur. HP encourage ses clients recycler les quipements lectroniques usags, les cartouches d'impression HP d'origine et les batteries rechargeables. Pour plus d'informations sur les programmes de recyclage, consultez le site Web HP l'adresse http://www.hp.com/recycle. Pour des informations sur le retrait d'une batterie remplaable par l'utilisateur, reportez-vous au manuel de l'utilisateur livr avec le produit. Conformit ENERGY STAR En tant que partenaire ENERGY STAR, HP a suivi le processus avanc de qualification et de certification des produits de l'EPA pour s'assurer que les produits portant le logo ENERGY STAR respectaient les rglementations ENERGY STAR en matire de rendement lectrique. Le logo suivant apparat sur tous les ordinateurs respectant les spcifications ENERGY STAR :

Le programme ENERGY STAR pour les ordinateurs a t cr par l'EPA pour encourager l'efficacit nergtique et rduire la pollution atmosphrique grce l'utilisation d'quipements meilleur 12 Chapitre 1 Avis de rglementation sur les ordinateurs portables rendement lectrique chez soi, au bureau et dans les usines. Une manire d'atteindre cet objectif consiste utiliser la fonction de gestion de l'alimentation de Microsoft Windows pour rduire la consommation d'nergie lorsque le produit n'est pas utilis. Cette fonction permet la mise en mode veille de l'ordinateur aprs une priode d'inactivit de l'utilisateur. Lorsque vous utilisez cette fonction avec un moniteur conforme au programme ENERGY STAR, les fonctions de gestion de l'alimentation du moniteur sont galement prises en charge. Pour profiter de ces conomies d'nergie potentielles, la fonction de gestion de l'alimentation est prconfigure comme suit lorsque le systme fonctionne sur secteur :

Dsactivation de l'cran aprs 10 minutes Mise en veille aprs 20 minutes Le mode veille est dsactiv par une simple pression sur le bouton d'alimentation/de veille. Lorsque la fonction Wake On LAN d'veil par appel rseau est active, le mode veille peut galement tre dsactiv en rponse un signal du rseau. Vous trouverez des informations complmentaires sur les conomies nergtiques et financires ralisables avec la fonction de gestion de l'alimentation sur le site Web du programme ENERGY STAR de l'U.S. Environmental Protection Agency (EPA), cette adresse http://www.energystar.gov/

powermanagement. Vous trouverez galement des informations sur le programme ENERGY STAR et ses avantages pour l'environnement sur le site Web ENERGY STAR de l'U.S. Environmental Protection Agency (EPA), cette adresse http://www.energystar.gov. Conformit du laser AVERTISSEMENT ! L'utilisation de mthodes de contrle ou de rglage ou de procdures, autres que celles indiques dans ce document ou dans le manuel d'installation d'appareils rayon laser, peut exposer l'utilisateur des radiations dangereuses. Pour rduire le risque d'exposition un rayonnement dangereux :

N'essayez pas d'ouvrir le botier du module. Il ne contient pas de pice rparable par l'utilisateur. N'utilisez pas de commandes, n'excutez aucun rglage ni aucune procdure au priphrique laser autre que ceux qui figurent dans le manuel d'installation du produit laser. Seul un mainteneur agr est autoris rparer l'unit. Ce produit peut tre fourni avec un priphrique de stockage optique (par exemple, un lecteur de CD ou DVD) et/ou un metteur-rcepteur fibre optique. Chacun de ces appareils qui contient un laser est class comme produit laser de classe 1 conformment la norme CEI/EN 60825-1 et rpond aux critres de scurit de cette norme. Chaque produit laser est conforme aux paragraphes 21 CFR 1040.10 et 1040.11 des rglementations FDA des tats-Unis ou est conforme ces rglementations l'exception des dviations relatives l'avis sur le laser No. 50, en date du 24 juin 2007. Conformit du laser 13 Avis sur les modems AVERTISSEMENT ! Pour rduire le risque d'incendie, d'lectrocution et de blessures pendant l'utilisation de cet appareil, suivez systmatiquement les rgles de scurit de base suivantes :

N'utilisez pas l'appareil proximit d'eau, par exemple prs d'une baignoire, d'un lavabo, d'un vier ou d'une piscine, ou encore dans une cave humide. vitez d'utiliser l'appareil pendant un orage. Il existe en effet un risque d'lectrocution d la foudre. N'utilisez jamais cet appareil pour signaler une fuite de gaz, si vous vous trouvez proximit de la fuite. Dbranchez systmatiquement le cble du modem avant d'ouvrir l'enceinte de l'appareil ou de toucher un cble modem non isol, une prise jack ou un composant interne. Si cet appareil n'a pas t fourni avec un cordon tlphonique, n'utilisez qu'un cordon tlphonique No. 26 AWG ou suprieur. Ne branchez pas un cble de modem ou de tlphone dans la prise rseau (RJ-45). GARDEZ CES INSTRUCTIONS Homologations des priphriques de tlcommunication Le priphrique de tlcommunication de votre ordinateur est homologu pour une connexion au rseau tlphonique des pays et rgions dont le certificat d'homologation apparat sur l'tiquette du produit appose sur la base de l'ordinateur ou sur le modem. Pour vrifier que ce matriel est configur pour le pays ou la rgion o il se trouve, reportez-vous au manuel d'utilisation qui l'accompagne. Si vous slectionnez un pays ou une rgion autre que celui ou celle dans lequel se trouve le modem, il risque de violer les lois de tlcommunication du pays ou de la rgion. De plus, votre modem risque de ne pas fonctionner correctement si vous ne slectionnez pas le bon pays ou la bonne rgion. Si, lorsque vous slectionnez un pays ou une rgion, un message indique que ce pays ou cette rgion n'est pas compatible, c'est que le modem n'a pas t agr dans ce pays ou cette rgion et ne doit donc pas tre utilis. Avis sur les modems pour les tats-Unis Cet quipement est conforme l'article 68 des rglementations FCC et aux conditions adoptes par l'ACTA. Une tiquette appose sur la face infrieure de l'ordinateur ou sur le modem comporte, entre autres informations, un identificateur de produit au format amricain : AAAEQ##TXXXX. Fournissez ces informations la compagnie tlphonique si elle vous le demande. Homologation applicable prise USOC = RJ11C. Les prises utilises pour connecter cet quipement aux cbles lectriques des lieux et au rseau tlphonique doivent tre conformes l'article 68 des rglementations FCC et aux conditions approuves par l'ACTA. Un cordon tlphonique et une prise modulaire conformes FCC sont livrs avec cet quipement. Il est conu pour tre branch sur une prise modulable galement conforme. Pour des dtails, reportez-vous aux instructions d'installation. Le REN permet de dterminer le nombre de priphriques pouvant tre raccords sur une ligne tlphonique. Si un nombre excessif d'appareils est prsent sur la ligne tlphonique, ceux-ci risquent de ne pas rpondre un appel entrant. Dans la plupart des cas (mais pas toujours), la somme des REN des priphriques raccords sur une ligne ne doit pas dpasser cinq (5). Pour tre sr du nombre d'appareils pouvant tre connects une mme ligne (dtermin par le numro REN), contactez la compagnie de tlphone locale. Pour les produits agrs aprs le 23 juillet 2001, le REN 14 Chapitre 1 Avis de rglementation sur les ordinateurs portables fait partie de l'identificateur du produit qui est au format amricain : AAAEQ##TXXXX. Les chiffres reprsents par le signe ## constituent le REN sans virgule (par exemple, 03 reprsente un REN de 0,3). Pour les produits antrieurs cette date, le REN est affich sparment sur l'tiquette. Si cet quipement HP dtriore le rseau tlphonique, la compagnie de tlphone vous avisera par avance qu'une interruption de service peut tre requise. Si la compagnie de tlphone ne peut pas vous aviser par avance, vous serez inform ds que possible. Vous serez galement inform de vos droits de rclamation auprs de la FCC si vous le jugez ncessaire. La compagnie de tlphone peut apporter des modifications ses quipements, oprations ou procdures pouvant affecter le bon fonctionnement de votre matriel. Si cela se produit, la compagnie de tlphone vous informera par avance pour vous permettre d'apporter les modifications requises afin d'assurer un service tlphonique sans interruption. Si vous rencontrez des problmes avec cet quipement, contactez le support technique. S'il dtriore le rseau tlphonique, la compagnie tlphonique peut vous demander de le dconnecter jusqu'

ce que le problme soit rsolu. Les seules rparations que vous pouvez effectuer sont celles qui sont prsentes dans la section Rsolution des problmes du manuel de l'utilisateur, si ce dernier est fourni. Le raccord des lignes partages est soumis aux tarifs en vigueur dans votre pays. Pour plus d'informations, contactez les commissions d'utilit publique, la commission de service public ou les commissions d'entreprise. Si votre domicile est quip d'un dispositif d'alarme spcial connect la ligne tlphonique, vrifiez que l'installation de cet quipement HP ne dsactive pas ce dispositif. Si vous avez des questions sur ce qui peut dsactiver le dispositif d'alarme, consultez votre compagnie de tlphone ou un installateur qualifi. La loi de 1991 sur la protection des usagers du tlphone interdit l'utilisation d'un ordinateur ou de tout autre dispositif lectronique, y compris les tlcopieurs, pour l'envoi d'un message, moins que ne soit inscrit clairement sur ce message (dans la marge, le haut ou le bas de chaque page ou sur la premire page) la date et l'heure de l'envoi ainsi que l'identit de la socit expditrice, de l'entit ou du particulier, ainsi que le numro de tlphone de la machine expditrice, de l'entit ou du particulier. Le numro de tlphone ne doit pas tre un numro commenant par 900 ni un numro dont le cot dpasse celui d'un appel local ou longue distance. Pour programmer ces informations dans votre tlcopieur, reportez-vous aux instructions relatives au logiciel d'envoi de tlcopies. Avis sur les modems 15 Dclarations sur les modems pour les tats-Unis Reportez-vous aux dclarations du fabricant du modem ci-aprs pour le modem install dans votre ordinateur :

16 Chapitre 1 Avis de rglementation sur les ordinateurs portables Avis sur les modems pour le Canada Cet quipement est conforme aux spcifications techniques d'Industrie Canada applicables. Le REN indique le nombre maximal d'appareils pouvant tre connects une interface tlphonique. La terminaison d'une interface peut consister en une combinaison d'appareils quelconque condition que la somme des REN de ces dispositifs ne dpasse pas 5. Le REN de ce terminal de communication est 1. Avis sur les modems pour le Japon Si la marque de certification japonaise ne figure pas sur la base de l'ordinateur, reportez-vous la certification ci-dessous. La marque de certification japonaise pour le modem fax/donnes V.92 56K figure ci-dessous :

Avis sur les modems pour la Nouvelle-Zlande L'octroi d'un Telepermit pour n'importe quel terminal de tlcommunication indique uniquement que Telecom certifie que l'quipement est bien conforme aux exigences minimales de connexion son rseau. Il ne constitue aucunement une prise de responsabilit quant au produit par Telecom, et n'apporte aucune sorte de garantie. Plus particulirement, il n'apporte aucune garantie que l'quipement fonctionnera correctement et en tous points avec un autre quipement Telepermit d'une marque ou d'un modle diffrent, et n'implique pas qu'un produit est compatible avec l'ensemble des services du rseau Telecom. Quelles que soient les conditions d'utilisation, ce matriel ne peut fonctionner correctement aux vitesses suprieures celles pour lesquelles il a t conu. Telecom dcline toute responsabilit si des difficults devaient apparatre dans de telles circonstances. Si cet quipement est dot de la composition impulsions, Telecom ne garantit pas la prise en charge par la ligne de la composition impulsions. L'utilisation de la numrotation par impulsions, sur une ligne partage par plusieurs dispositifs, peut provoquer un dclenchement de la sonnerie ou des parasites et galement une rponse errone. *Si ce type de problme se produit, l'utilisateur ne doit pas contacter les services techniques de Telecom Nouvelle-Zlande. Certains paramtres ncessaires pour une conformit avec les exigences Telepermit de Telecom dpendent du matriel (PC) associ cet appareil. Le matriel associ doit tre configur de manire fonctionner dans les limites prescrites pour tre conforme aux spcifications Telecom :

a. Seules 10 tentatives d'appel maximum peuvent tre effectues au mme numro dans un intervalle de 30 minutes, pour n'importe quelle initialisation manuelle d'appel. b. Un intervalle minimum de 30 secondes doit s'couler entre la fin d'une tentative d'appel et le dbut de la suivante. Avis sur les modems 17 c. d. Lorsque des appels automatiques sont effectus divers numros, un intervalle minimum de 5 secondes doit s'couler entre la fin d'une tentative d'appel et le dbut de la suivante. Le matriel doit tre configur de telle manire que les appels soient traits dans un dlai de 3 30 secondes partir de la rception de la sonnerie (il doit donc tre configur entre 2 et 10 secondes). Support vocal Toutes les personnes qui utilisent cet appareil pour enregistrer des conversations tlphoniques doivent se soumettre la lgislation de la Nouvelle-Zlande. Celle-ci exige qu'au moins une des deux parties participant la conversation doit tre au courant de l'enregistrement. En outre, les principes relatifs la nature des informations personnelles recueillies, aux objectifs de leur collecte, leur utilisation et la divulgation de ces informations des tiers, principes rpertoris dans la loi sur la protection de la vie prive de 1993, doivent tre respects. Ce matriel ne doit pas tre configur de manire passer des appels automatiques au numro d'urgence (111) mis en place par Telecom. Avis sur les cordons d'alimentation Si votre ordinateur ne vous a pas t livr avec un cordon d'alimentation ou un accessoire d'alimentation secteur compatible avec votre ordinateur, vous devrez acheter un cordon d'alimentation homologu pour votre pays ou votre rgion. Le cordon d'alimentation doit tre test et garanti pour le produit, pour la tension et le type de courant inscrits sur l'tiquette des valeurs nominales lectriques du produit. Les valeurs nominales de tension et d'intensit du cordon doivent tre suprieures celles indiques sur l'ordinateur. En outre, le diamtre du cordon doit tre au minimum de 0,75 mm/18 AWG et sa longueur doit tre comprise entre 1,5 m (5 pieds) et 2 m (6.5 pieds). Si vous avez des questions sur le type de cordon d'alimentation utiliser, contactez votre fournisseur de service agr. Branchez le cordon d'alimentation de sorte qu'il ne puisse pas tre pitin ou coinc par des objets. Accordez une attention particulire la fiche, la prise secteur et l'endroit o le cordon sort du botier du portable. Avis sur les cordons d'alimentation pour le Japon Prise CC de la source d'alimentation externe HP 18 Chapitre 1 Avis de rglementation sur les ordinateurs portables Avis de Macrovision Corporation Ce produit intgre une technologie de protection des droits d'auteur qui est protge par des revendications de procd de certains brevets amricains et d'autres droits sur la proprit intellectuelle de Macrovision Corporation et d'autres bnficiaires de droits. L'utilisation de cette technologie de protection des droits d'auteur doit tre autorise par Macrovision Corporation et a pour but de permettre un visionnage domestique et d'autres utilisations limites uniquement, sauf autorisation de Macrovision Corporation. L'ingnierie inverse et le dsassemblage sont interdits. Avis de Macrovision Corporation 19 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Avis sur les modems AVERTISSEMENT ! Pour rduire le risque d'incendie, d'lectrocution et de blessures pendant l'utilisation de cet appareil, suivez systmatiquement les rgles de scurit de base suivantes :

N'utilisez pas l'appareil proximit d'eau, par exemple prs d'une baignoire, d'un lavabo, d'un vier ou d'une piscine, ou encore dans une cave humide. vitez d'utiliser l'appareil pendant un orage. Il existe en effet un risque d'lectrocution d la foudre. N'utilisez jamais cet appareil, pour signaler une fuite de gaz, si vous vous trouvez proximit de la fuite. Dbranchez systmatiquement le cble du modem avant d'ouvrir l'enceinte de l'appareil ou de toucher un cble modem non isol, une prise jack ou un composant interne. Si cet appareil n'a pas t fourni avec un cordon tlphonique, n'utilisez qu'un cordon tlphonique No. 26 AWG ou suprieur. Ne branchez jamais un cordon de modem ou de tlphone dans la prise RJ-45 (rseau Ethernet). GARDEZ CES INSTRUCTIONS Homologations des priphriques de tlcommunication Le priphrique de tlcommunication de votre ordinateur est homologu pour une connexion au rseau tlphonique des pays et rgions dont le certificat d'homologation apparat sur l'tiquette du produit appose sur la base de l'ordinateur ou sur le modem. Pour vrifier que ce matriel est configur pour le pays ou la rgion o il se trouve, reportez-vous au manuel d'utilisation qui l'accompagne. Si vous slectionnez un pays ou une rgion autre que celui ou celle dans lequel se trouve le modem, il risque de violer les lois de tlcommunication du pays ou de la rgion. De plus, votre modem risque de ne pas fonctionner correctement si vous ne slectionnez pas le bon pays ou la bonne rgion. Si, lorsque vous slectionnez un pays ou une rgion, un message indique que ce pays ou cette rgion n'est pas support, c'est que le modem n'a pas t agr dans ce pays ou cette rgion et ne doit donc pas tre utilis. 20 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Avis sur les modems pour les tats-Unis Cet quipement est conforme l'article 68 des rglementations FCC et aux conditions adoptes par l'ACTA. Une tiquette appose sur la face infrieure de l'ordinateur ou sur le modem comporte, entre autres informations, un identificateur de produit au format US: AAAEQ##TXXXX. Fournissez ces informations la compagnie tlphonique si elle vous le demande. Homologation applicable prise USOC = RJ11C. Les prises utilises pour connecter cet quipement aux cbles lectriques des lieux et au rseau tlphonique doivent tre conformes l'article 68 des rglementations FCC et aux conditions approuves par l'ACTA. Un cordon tlphonique et une prise modulaire conformes FCC sont livrs avec cet quipement. Il est conu pour tre branch sur une prise modulable galement conforme. Pour des dtails, reportez-vous aux instructions d'installation. Le REN permet de dterminer le nombre de priphriques pouvant tre raccords sur une ligne tlphonique. Si un nombre excessif d'appareils est prsent sur la ligne tlphonique, ceux-ci risquent de ne pas rpondre un appel entrant. Dans la plupart des cas (mais pas toujours), la somme des REN des priphriques raccords sur une ligne ne doit pas dpasser cinq (5). Pour tre sr du nombre d'appareils pouvant tre connects une mme ligne (dtermin par le numro REN), contactez la compagnie de tlphone locale. Pour les produits agrs aprs le 23 juillet 2001, le REN fait partie de l'identificateur du produit qui est au format amricain : AAAEQ##TXXXX. Les chiffres reprsents par le signe ## constituent le REN sans virgule (par exemple, 03 reprsente un REN de 0,3). Pour les produits antrieurs cette date, le REN est affich sparment sur l'tiquette. Si cet quipement HP dtriore le rseau tlphonique, la compagnie de tlphone vous avisera par avance qu'une interruption de service peut tre requise. Si la compagnie de tlphone ne peut pas vous aviser par avance, vous serez inform ds que possible. Vous serez galement inform de vos droits de rclamation auprs de la FCC si vous le jugez ncessaire. La compagnie de tlphone peut apporter des modifications ses quipements, oprations ou procdures pouvant affecter le bon fonctionnement de votre matriel. Si cela se produit, la compagnie de tlphone vous informera par avance pour vous permettre d'apporter les modifications requises afin d'assurer un service tlphonique sans interruption. Si vous rencontrez des problmes avec cet quipement, contactez le support technique. S'il dtriore le rseau tlphonique, la compagnie tlphonique peut vous demander de le dconnecter jusqu'

ce que le problme soit rsolu. Les seules rparations que vous pouvez effectuer sont celles qui sont prsentes dans la section Rsolution des problmes du manuel de l'utilisateur, si ce dernier est fourni. Le raccord des lignes partages est soumis aux tarifs en vigueur dans votre pays. Pour plus d'informations, contactez les commissions d'utilit publique, la commission de service public ou les commissions d'entreprise. Si votre domicile est quip d'un dispositif d'alarme spcial connect la ligne tlphonique, vrifiez que l'installation de cet quipement HP ne dsactive pas ce dispositif. Si vous avez des questions sur ce qui peut dsactiver le dispositif d'alarme, consultez votre compagnie de tlphone ou un installateur qualifi. La loi de 1991 sur la protection des usagers du tlphone interdit l'utilisation d'un ordinateur ou de tout autre dispositif lectronique, y compris les tlcopieurs, pour l'envoi d'un message, moins que ne soit inscrit clairement sur ce message (dans la marge, le haut ou le bas de chaque page ou sur la premire page) la date et l'heure de l'envoi ainsi que l'identit de la socit expditrice, de l'entit ou du particulier, ainsi que le numro de tlphone de la machine expditrice, de l'entit ou du particulier. Le numro de tlphone ne doit pas tre un numro commenant par 900 ni un numro dont le cot dpasse celui d'un appel local ou longue distance. Avis sur les modems 21 Pour programmer ces informations dans votre tlcopieur, reportez-vous aux instructions relatives au logiciel d'envoi de tlcopies. Avis sur les modems pour le Canada Cet quipement est conforme aux normes techniques Industrie Canada applicables. Le REN donne une indication sur le nombre maximum de priphriques qu'il est possible de relier une interface tlphonique. La terminaison d'une interface peut consister en une combinaison de priphriques quelconque condition que la somme des REN de ces dispositifs ne dpasse pas 5. Le REN de ce terminal de communication est 1. Avis sur les modems pour le Japon Si la marque de certification japonaise ne figure pas sur la base de l'ordinateur, reportez-vous la certification ci-dessous. Au Japon, la marque de certification pour le modem LSI Corporation PCI-SV92EX Soft est la suivante :

Avis sur les modems pour la Nouvelle-Zlande L'octroi d'un Telepermit pour n'importe quel terminal de tlcommunication indique uniquement que Telecom certifie que l'quipement est bien conforme aux exigences minimales de connexion son rseau. Il ne constitue aucunement une prise de responsabilit quant au produit par Telecom, et n'apporte aucune sorte de garantie. Plus particulirement, il n'apporte aucune garantie que l'quipement fonctionnera correctement et en tous points avec un autre quipement Telepermit d'une marque ou d'un modle diffrent, et n'implique pas qu'un produit est compatible avec l'ensemble des services du rseau Telecom. Quelles que soient les conditions d'utilisation, ce matriel ne peut fonctionner correctement aux vitesses suprieures celles pour lesquelles il a t conu. Telecom dcline toute responsabilit si des difficults devaient apparatre dans de telles circonstances. Si cet quipement est dot de la composition impulsions, Telecom ne garantit pas la prise en charge par la ligne de la composition impulsions. L'utilisation de la numrotation par impulsions, sur une ligne partage par plusieurs dispositifs, peut provoquer un dclenchement de la sonnerie ou des parasites et galement une rponse errone. Si ce type de problme se produit, l'utilisateur ne doit pas contacter les services techniques de Telecom Nouvelle-Zlande. 22 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Certains paramtres ncessaires pour une conformit avec les exigences Telepermit de Telecom dpendent du matriel (PC) associ cet appareil. Le matriel associ doit tre configur de manire fonctionner dans les limites prescrites pour tre conforme aux spcifications Telecom :

a. Seules 10 tentatives d'appel maximum peuvent tre effectues au mme numro dans un intervalle de 30 minutes, pour n'importe quelle initialisation manuelle d'appel. b. Un intervalle minimum de 30 secondes doit s'couler entre la fin d'une tentative d'appel et le dbut de la suivante. c. d. Lorsque des appels automatiques sont effectus divers numros, un intervalle minimum de 5 secondes doit s'couler entre la fin d'une tentative d'appel et le dbut de la suivante. Le matriel doit tre configur de telle manire que les appels soient traits dans un dlai de 3 30 secondes partir de la rception de la sonnerie (il doit donc tre configur entre 2 et 10 secondes). Assistance vocale Toutes les personnes qui utilisent cet appareil pour enregistrer des conversations tlphoniques doivent se soumettre la lgislation de la Nouvelle-Zlande. Celle-ci exige qu'au moins une des deux parties participant la conversation doit tre au courant de l'enregistrement. En outre, les principes relatifs la nature des informations personnelles recueillies, aux objectifs de leur collecte, leur utilisation et la divulgation de ces informations des tiers, principes rpertoris dans la loi sur la protection de la vie prive de 1993, doivent tre respects. Ce matriel ne doit pas tre configur de manire passer des appels automatiques au numro d'urgence (111) mis en place par Telecom. Avis de compatibilit lectromagntique Ce manuel prsente les avis de rglementation relatifs aux fonctions avec et sans fil des diffrents pays et rgions, ainsi que des informations de conformit de l'ordinateur. Certains de ces avis ne s'appliquent peut-tre pas votre produit. Un ou plusieurs priphriques sans fil intgrs peuvent tre installs. Dans certains environnements, l'utilisation d'appareils sans fil peut tre limite. Ces restrictions peuvent s'appliquer dans les avions, dans les hpitaux, prs d'explosifs, dans des lieux dangereux, etc. Si vous n'tes pas sr des rgles qui s'appliquent ce produit, demandez si vous pouvez l'utiliser avant de le mettre sous tension. Avis de compatibilit lectromagntique 23 Avis de la FCC Cet quipement a t test et trouv conforme aux limitations relatives aux appareils numriques de classe B, en accord avec l'article 15 des rgles de la FCC. Ces limitations sont conues pour offrir une protection raisonnable contre les interfrences dans une installation rsidentielle. Cet quipement produit, utilise et peut mettre de l'nergie sous forme de radiofrquences. S'il n'est pas utilis conformment aux instructions, il peut produire des interfrences nuisibles aux communications radio. Cependant, il n'existe aucune garantie assurant qu'il n'y aura pas d'interfrence dans une installation particulire. Si l'utilisateur constate des interfrences lors de la rception d'missions de radio ou de tlvision (il suffit pour le vrifier d'allumer et d'teindre successivement l'appareil), il devra prendre l'une ou plusieurs des mesures suivantes pour les liminer savoir :

Rorienter ou repositionner l'antenne de rception. Accrotre la distance entre le matriel et le rcepteur. Brancher le matriel informatique une prise d'un circuit autre que celui auquel est branch le rcepteur. Demander conseil un revendeur ou un technicien de radio ou de tlvision expriment. Modifications La FCC requiert que l'utilisateur soit averti que toute modification de cet quipement non approuve expressment pas la socit Hewlett-Packard pourrait annuler le droit de l'utilisateur d'utiliser l'quipement. Cbles Les cbles branchs cet quipement doivent tre blinds et comporter des protections de connecteur mtalliques de type RFI/EMI pour tre conformes aux directives et rglementations de la FCC. 24 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Dclaration de conformit pour les produits portant le logo FCC (tats-Unis uniquement) Ce matriel est conforme l'alina 15 de la rglementation de la FCC. Son fonctionnement est sous rserve des deux conditions suivantes :

1. Cet quipement ne doit pas causer d'interfrences nuisibles et 2. Cet quipement doit accepter toute interfrence reue, y compris les interfrences capables de causer un mauvais fonctionnement. Si vous avez des questions au sujet de votre produit, crivez-nous l'adresse :

Hewlett-Packard Company P.O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Si vous avez des questions au sujet de la dclaration FCC, crivez-nous l'adresse :

Hewlett-Packard Company P.O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Ou appelez-nous au (281) 514-3333. Pour identifier ce produit, communiquez la rfrence ou le numro de srie ou de modle figurant sur le produit. Produits quips de priphriques LAN sans fil Ce produit peut tre quip d'un priphrique de rseau local sans fil. Ce priphrique ne doit pas tre situ au mme endroit ou fonctionner en mme temps qu'une autre antenne ou un autre metteur. AVERTISSEMENT ! Exposition des missions de radiofrquence La puissance de sortie mise par ce priphrique est infrieure aux limites de la FCC sur l'exposition des missions de radiofrquence. Nanmoins, le priphrique doit tre utilis de faon ce que les risques de contact physique soient rduits pendant le fonctionnement normal de l'appareil. Pendant le fonctionnement normal : Pour viter de dpasser les limites d'expositions aux frquences radio dictes dans la rglementation FCC, il est prfrable de ne pas s'approcher plus de 20 cm

(8 pouces) de l'antenne. Pour identifier l'emplacement des antennes sans fil, reportez-vous la documentation qui accompagne l'ordinateur. ATTENTION : Si vous utilisez un rseau local sans fil IEEE 802.11a, l'appareil ne doit tre utilis qu' l'intrieur d'un btiment, car il fonctionne dans une bande de frquences allant de 5,15 5,25 GHz. Il s'agit d'une rglementation de la FCC visant rduire le risque d'interfrences nuisibles aux systmes mobiles par satellite utilisant les mmes canaux. Les bandes de frquences allant de 5,25 5,35 GHz et de 5,65 5,85 GHz sont rserves aux stations radars trs puissantes. Celles-ci peuvent causer des interfrences et/ou endommager l'appareil. Dclaration sur les tlcommunications pour l'Australie The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of ACA Technical Standard TS008. AVERTISSEMENT ! Modems without integral RJ-11 that are shipped with this computer must be installed only in devices displaying the A-tick. Avis de compatibilit lectromagntique 25 Avis pour le Brsil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. ATTENTION : A alimentao de energia predefinida para 220/230Vv. Se voc possuir tomada eltrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Avis pour le Canada Cet appareil numrique de classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. Si cet appareil dispose d'une fonctionnalit WLAN ou Bluetooth, il est conforme aux normes RSS pour les appareil exempts de licence d'Industrie Canada. Son fonctionnement est sous rserve des deux conditions suivantes : (1) cet appareil ne doit pas provoquer d'interfrences et

(2) cet appareil doit tolrer toute interfrence, notamment les interfrences pouvant engendrer un mauvais fonctionnement de l'appareil. AVERTISSEMENT ! Exposition aux radiations de frquence radio La puissance de rayonnement de cet appareil est infrieure aux limites d'exposition aux radiations mises par les frquences radio dictes par Industrie Canada. Toutefois, l'appareil doit tre utilis de sorte que les possibilits de contact humain soient rduites au maximum pendant son fonctionnement normal. Pendant le fonctionnement normal : Pour viter de dpasser les limites d'exposition aux frquences radio dictes par Industrie Canada, il est prfrable de ne pas s'approcher plus de 20 cm

(8 pouces) des antennes. Pour identifier l'emplacement des antennes sans fil, reportez-vous la documentation qui accompagne l'ordinateur. ATTENTION : En cas d'utilisation d'un rseau LAN IEEE 802.11a, ce produit doit uniquement tre utilis l'intrieur d'un btiment, en raison de son fonctionnement sur la plage de frquence de 5,15 5,25 GHz. Industrie Canada exige que ce produit soit utilis l'intrieur d'un btiment pour la plage de frquence allant de 5,15 5,25 GHz afin de rduire le risque d'interfrences prjudiciables pour les systmes de satellites mobiles utilisant le mme canal. Les plages de 5,25 5,35 GHz et de 5,65 5,85 GHz sont alloues prioritairement aux radars haute puissance. Ces stations radar peuvent provoquer des interfrences avec cet appareil ou l'endommager. L'antenne de cet appareil ne se remplace pas. Toute tentative de modification par l'utilisateur peut endommager l'ordinateur. Avis pour l'Union europenne Dclaration de conformit Les produits portant la marque CE sont conformes une ou plusieurs directives de l'UE suivantes, le cas chant :

Directive relative la basse tension 2006/95/CE Directive EMC 2004/108/CE Directive Ecodesign 2009/125/CE Directive R&TTE 1999/5/CE Directive RoHS 2011/65/CE 26 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles La conformit CE de ce produit n'est valide que s'il est aliment par un adaptateur secteur estampill CE (le cas chant) et un cordon d'alimentation fournis par HP. Reportez-vous la section Cordons d'alimentation requis la page 39. La conformit ces directives implique la conformit aux normes europennes harmonises applicables (normes europennes) qui sont prsentes dans la dclaration de conformit de l'UE dicte par HP pour ce produit ou cette gamme de produits et disponibles soit dans la documentation du produit soit sur le site Web suivant : www.hp.eu/certificates (effectuez une recherche partir du nom de modle du produit ou de son numro de produit, accessible sur l'tiquette de conformit). La conformit est reprsente par la marque de conformit CE ci-aprs. Pour certains produits de tlcommunications, le numro 4 chiffres d'un organisme de certification peut tre ajout en suffixe. Reportez-vous l'tiquette de conformit appose sur le produit. La fonctionnalit de tlcommunications de ce produit peut tre utilise dans les pays de l'Union europenne et de l'AELE suivants : Allemagne, Autriche, Belgique, Bulgarie, Chypre, Danemark, Espagne, Estonie, Finlande, France, Grce, Hongrie, Irlande, Islande, Lettonie, Liechtenstein, Lituanie, Luxembourg, Malte, Norvge, Pays-Bas, Pologne, Portugal, Rpublique tchque, Roumanie, Royaume-Uni, Slovaquie, Slovnie, Sude et Suisse. Pour toute question portant sur les rglementations, envoyez un courrier : Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Allemagne. Produits quips de modules sans fil CET APPAREIL EST CONFORME AUX NORMES INTERNATIONALES EN MATIRE D'EXPOSITION AUX RAYONNEMENTS DE FRQUENCE RADIO. Le module sans fil intgr votre ordinateur est un metteur et rcepteur radio. Cet appareil est conu pour ne pas dpasser les limites d'exposition aux frquences radio dfinies par des directives internationales (ICNIRP). Ces limites sont dfinies dans le cadre de directives qui tablissent les niveaux autoriss de rayonnements de frquence radio pour l'ensemble de la population. Ces directives, dictes par des organismes scientifiques indpendants, s'appuient sur une valuation rgulire et minutieuse de diffrentes tudes scientifiques. Cet appareil est galement conforme aux directives R&TTE europennes relatives la protection de la sant et de la scurit des personnes. La norme d'exposition dfinie pour les appareils mobiles utilise une unit de mesure appele SAR

(Specific Absorption Rate, taux d'absorption spcifique).* Ce taux a t obtenu via des tests au cours desquels les appareils ont effectu des transmissions au niveau de puissance certifi le plus lev, dans toutes les bandes de frquence. Le taux SAR rel de l'appareil en cours de fonctionnement peut tre bien infrieur la valeur maximale dfinie, dans la mesure o il fonctionne diffrents niveaux de puissance et utilise uniquement la puissance requise pour atteindre le rseau. Install dans l'ordinateur, cet appareil est conforme aux directives en matire d'exposition aux frquences radio lorsque les antennes se trouvent une distance minimale du corps. Pour transmettre des donnes ou des messages, l'appareil doit disposer d'une connexion de qualit au rseau. Dans certains cas, les transmissions de donnes ou de messages peuvent tre retardes jusqu' ce qu'une connexion soit disponible. Veillez respecter la distance conseille jusqu' la fin de la transmission. Avis de compatibilit lectromagntique 27

*Les directives internationales autres que celles de la FCC indiquent que la limite SAR pour les appareils mobiles utiliss par le grand public est de 2 watts/kilogramme (W/kg), calcul sur une moyenne de 10 grammes de masse tissulaire. Ces directives incluent une marge de scurit importante pour une protection accrue du grand public et pour tenir compte des variations dans les mesures. Les valeurs SAR peuvent varier selon les exigences locales en matire de reporting et selon la bande du rseau. Cet quipement intgre un appareil de transmission et rception radiolectrique. Lors d'une utilisation standard, l'observation d'une distance de sparation de 20 cm permet aux niveaux d'exposition des frquences radio de respecter la conformit des normes australiennes et no-zlandaises. Dclaration relative au rseau tlphonique europen (modem/fax) Le produit ci-joint est conforme aux spcifications de la directive 1999/5/CE (annexe II) sur les quipements hertziens et quipements terminaux de tlcommunications et porte en consquence la marque CE. Cependant, des diffrences existant entre les rseaux tlphoniques publics commuts

(RTPC) nationaux prsents dans les diffrents pays/rgions, cette homologation en elle-mme ne garantit pas la russite de toutes les oprations sur tous les points de terminaison du RTPC. En cas de problme, prenez contact avec le fournisseur auprs duquel vous vous tes procur votre quipement. L'quipement a t conu pour fonctionner avec les rseaux DTMF analogiques. Cet quipement peut connatre des difficults d'interconnexion sur les rseaux RTPC prenant uniquement en charge la composition impulsions. Contactez votre oprateur rseau pour bnficier d'une aide supplmentaire. Avis sur l'ergonomie Allemagne (texte en franais) Un systme informatique compos de produits de marque HP est conforme aux exigences allemandes en matire d'ergonomie si tous les produits utiliss portent la marque d'homologation GS , par exemple l'ordinateur de bureau, le clavier, la souris et le moniteur. Allemagne (texte en allemand) Ein aus HP Produkten bestehendes Computersystem erfllt die anwendbaren ergonomischen Anforderungen, wenn alle verwendeten Komponenten das GS Zeichen tragen, wie z. B. Business Desktop PC, Tastatur, PC-Maus und Bildschirm. Avis pour le Japon B VCCI-B 28 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Marques de certification des priphriques WLAN et Bluetooth If this device contains radio equipment, it is certified radio equipment. Avis pour la Core du Sud Avis de compatibilit lectromagntique 29 Avis pour le Mexique Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Si su producto se brinda con accesorios inalmbricos como un teclado o un mouse y necesita identificar el modelo del accesorio, consulte la etiqueta incluida en ese accesorio. Avis pour Tawan 30 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles 3 Avis de scurit pour les ordinateurs portables AVERTISSEMENT ! Pour rduire les risques de blessures graves, lisez le manuel Scurit et ergonomie du poste de travail. Il dcrit l'installation du poste de travail, la posture ainsi que les conditions de scurit et de travail appropries pour les utilisateurs, et fournit des informations importantes sur la scurit lectrique et mcanique. Vous trouverez ce manuel sur le Web l'adresse http://www.hp.com/ergo, ainsi que sur le CD de documentation qui accompagne le produit. Notice d'avertissement relative la chaleur AVERTISSEMENT ! Pour viter tout risque de blessure associe la chaleur ou de surchauffe de l'ordinateur, ne placez pas ce dernier sur vos genoux et n'obstruez pas ses ouvertures d'aration. Utilisez toujours l'ordinateur sur une surface plane et rigide. La ventilation ne doit pas tre entrave par des lments rigides, tels qu'une imprimante, ni par des lments souples, tels que des coussins, du tissu ou un tapis pais. De mme, l'adaptateur secteur ne doit rester en contact ni avec la peau ni avec un lment souple, tel que des coussins, un vtement ou un tapis lorsque l'ordinateur est en cours de fonctionnement. L'ordinateur et l'adaptateur secteur sont conformes aux limites de temprature de surface accessible l'utilisateur, dfinies par la norme internationale sur la scurit du matriel informatique (CEI/EN 60950). Avis sur les risques lis la scurit Si vous observez l'une des situations suivantes (ou avez d'autres inquitudes en matire de scurit), n'utilisez pas l'ordinateur : bruit de crpitement, de sifflement ou de claquement ou forte odeur/fume en provenance de l'ordinateur. La survenue de l'une de ces situations est normale en cas de dfaillance d'un composant lectronique interne de manire neutralise et contrle. Cependant, ces situations peuvent galement indiquer un risque de scurit. Ne partez pas du principe qu'il s'agit d'une dfaillance neutralise. Mettez l'ordinateur hors tension, dconnectez-le de sa source d'alimentation, puis contactez le support technique. Notice d'avertissement relative la chaleur 31 Avis sur les batteries remplaables par l'utilisateur AVERTISSEMENT !

batterie d'un type incorrect. liminez les batteries usages en respectant les instructions. Il existe un risque d'explosion en cas de remplacement de la batterie par une AVERTISSEMENT ! Pour rduire le risque d'incendie ou de brlures, abstenez-vous de dmonter, d'craser, de perforer, de jeter dans l'eau ou dans le feu une batterie, ou encore de court-circuiter ses connecteurs externes. AVERTISSEMENT ! Ne laissez pas les batteries la porte des enfants. AVERTISSEMENT ! Pour limiter les risques lis la scurit, n'utilisez que la batterie fournie avec l'ordinateur, une batterie de remplacement fournie par HP ou une batterie compatible achete comme accessoire auprs de HP. Avis sur le niveau du volume du casque et des couteurs AVERTISSEMENT ! L'coute prolonge de musique un volume lev peut endommager votre acuit auditive. Pour rduire le risque de diminution de l'acuit auditive, baissez le volume un niveau modr et agrable et minimisez le temps d'coute des volumes levs. Pour votre scurit, rinitialisez toujours le volume avant d'utiliser un casque ou des couteurs. Le volume sonore de certains de ces appareils peut tre plus lev que d'autres, mme si le rglage est identique. Toute modification des paramtres audio ou d'galisation par dfaut peut entraner une augmentation du volume et doit tre effectue avec prcaution. Pour votre scurit, utilisez uniquement des casques ou des couteurs respectant les limites dfinies par la norme EN 50332-2. Si l'ordinateur comporte un casque ou des couteurs, cette combinaison respecte la norme EN 50332-1. 32 Chapitre 3 Avis de scurit pour les ordinateurs portables Avis sur les cordons d'alimentation AVERTISSEMENT ! Pour rduire les risques d'lectrocution ou de dtrioration du matriel :

Branchez le cordon d'alimentation sur une prise secteur facilement accessible. Coupez l'alimentation de l'ordinateur en dbranchant le cordon d'alimentation de la prise secteur

(plutt que de l'ordinateur). Si l'ordinateur portable est fourni avec une fiche tripolaire, branchez le cordon sur une prise lectrique tripolaire relie la terre. Ne dsactivez pas la broche de mise la terre du cordon d'alimentation en utilisant, par exemple, un adaptateur bipolaire. La broche de mise la terre constitue un lment de scurit essentiel. AVERTISSEMENT ! Pour limiter les problmes de scurit potentiels, n'utilisez avec cet ordinateur que l'adaptateur secteur fourni avec l'ordinateur, un adaptateur secteur de remplacement fourni par HP ou un adaptateur secteur achet comme accessoire auprs de HP. Nettoyage du clavier AVERTISSEMENT ! Pour rduire les risques d'lectrocution ou de dtrioration des composants internes, n'utilisez pas d'aspirateur pour nettoyer le clavier. Un aspirateur peut dposer de la poussire sur la surface du clavier. Nettoyez rgulirement le clavier pour viter que les touches ne deviennent collantes et pour liminer la poussire, les peluches et les particules qui risquent de se loger sous les touches. Utilisez une bombe dpoussirante air comprim avec embout directionnel permettant d'insuffler de l'air sous le clavier et autour des touches pour retirer les particules. Avis sur les dplacements AVERTISSEMENT ! Afin de rduire le risque de choc lectrique, d'incendie ou de dtrioration du matriel, n'essayez pas d'alimenter l'ordinateur au moyen d'un kit de conversion de tension destin aux quipements mnagers. Avis sur les cordons d'alimentation 33 Avis de scurit pour la Chine Chine : avis sur l'altitude Avis sur l'altitude pour les produits dont l'utilisation n'est pas certifie au-del de 5 000 m d'altitude 2000m ou 2000 Chine : avis sur une utilisation dans des conditions tropicales Avis pour les produits dont l'utilisation n'est pas certifie dans des conditions tropicales Norvge et Sude : notice de mise la terre des cbles pour les produits quips d'un tuner TV ATTENTION : Pour limiter les risques lis la scurit, utilisez un isolant voltaque lors de la connexion un systme de distribution par cble. 34 Chapitre 3 Avis de scurit pour les ordinateurs portables 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Informations importantes relatives la scurit AVERTISSEMENT ! Pour rduire les risques de blessures graves, lisez le manuel Scurit et ergonomie du poste de travail. Il dcrit l'installation du poste de travail, la posture ainsi que les conditions de scurit et de travail appropries pour les utilisateurs, et fournit des informations importantes sur la scurit lectrique et mcanique. Vous trouverez ce manuel sur le Web l'adresse http://www.hp.com/ergo, ainsi que sur le CD de documentation qui accompagne le produit. Afin d'viter tout risque de choc lectrique ou de dommages votre quipement :

Ne dsactivez pas la prise de mise la terre du cordon d'alimentation. La prise de mise la terre constitue un lment de scurit essentiel. Branchez le cordon d'alimentation sur une prise mise la terre facilement accessible. Coupez l'alimentation du client lger en dbranchant le cordon d'alimentation de la prise secteur. L'ordinateur peut tre trs lourd ; assurez-vous d'adopter une position ergonomique adquate lors de sa manipulation. Installez l'ordinateur proximit d'une prise secteur. Le cordon d'alimentation secteur constitue le principal dispositif de dconnexion secteur de votre ordinateur et doit donc tre facilement accessible. Pour votre scurit, le cordon d'alimentation fourni avec votre ordinateur est quip d'une broche de mise la terre. Utilisez toujours le cordon d'alimentation avec une prise murale correctement relie la terre, afin de rduire les risques d'lectrocution. Pour rduire les risques de choc lectrique en provenance du rseau tlphonique, branchez votre ordinateur dans une prise secteur avant de le connecter une ligne tlphonique. Par ailleurs, dconnectez votre ligne tlphonique avant de dbrancher votre ordinateur de la prise secteur. Dbranchez le cordon du modem du rseau tlphonique avant d'installer ou d'enlever le capot de votre ordinateur. N'utilisez pas l'ordinateur lorsque le capot est enlev. Pour plus de scurit, dbranchez toujours l'ordinateur de sa source d'alimentation, de tout systme de tlcommunications (comme les lignes tlphoniques), des rseaux et des modems avant d'excuter toute opration de maintenance. Si vous ne respectez pas ces consignes, vous risquez de vous blesser ou de causer des dommages matriels. Le modem et l'alimentation de ce produit renferment des niveaux de tension dangereux. Informations importantes relatives la scurit 35 ATTENTION : Si votre ordinateur est quip d'un commutateur de slection de tension destin aux systmes fonctionnant sous 115 ou 230 V, ce commutateur a t prdfini sur la tension en vigueur dans le pays/rgion o il a t vendu initialement. Mettre le commutateur sur la mauvaise position peut endommager l'ordinateur et annuler toute garantie implicite. Ce produit n'a pas t valu pour une connexion un systme d'alimentation informatique (un systme de distribution de courant alternatif sans connexion directe la terre, selon la norme CEI/EN 60950). Conditions d'installation Consultez les instructions d'installation avant de brancher cet quipement l'alimentation. AVERTISSEMENT ! L'quipement doit tre pourvu d'un raccordement la terre protecteur secteur appropri. Cet ordinateur peut contenir des pices sous tension et amovibles. Dbranchez le cordon d'alimentation avant de retirer le botier. Remettez le botier bien en place avant de remettre l'ordinateur sous tension. Avis sur le remplacement de la batterie AVERTISSEMENT ! Le produit peut contenir une pile ou un module de batterie interne alcalin, au dioxyde de lithium manganse ou au pentoxyde de vanadium. Il y a danger d'incendie et de brlures s'il n'est pas manipul correctement. Pour rduire les risques de blessure :

N'essayez pas de recharger la batterie. vitez de la soumettre des tempratures suprieures 60 C (140 F). N'essayez pas de dmonter, d'craser, de percer la batterie, ni de court-circuiter ses bornes ou de la jeter dans le feu ou l'eau. Il existe un risque d'explosion en cas de remplacement de la batterie par une batterie d'un type incorrect. liminez les batteries usages en respectant les instructions. Remplacez uniquement par une batterie HP prvue pour ce produit. Pour plus d'informations sur le retrait d'une batterie, reportez-vous la documentation de l'ordinateur. Les piles, modules de batterie et accumulateurs ne doivent pas tre jets avec les ordures mnagres. Pour permettre leur recyclage ou leur mise au rebut, veuillez utiliser les systmes de collecte publique ou renvoyez-les HP, un partenaire HP agr ou leurs agents. Taiwan EPA demande aux fabricants ou aux importateurs de piles, conformment l'Article 15 de la loi relative la mise au rebut (Waste Disposal Act), d'indiquer les mentions de rcupration des piles usages dans des points de vente, brochures ou publicits. Contactez une entreprise de recyclage qualifie pour la mise au rebut approprie de la pile. 36 Chapitre 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Avis sur le volume des casques et des couteurs AVERTISSEMENT ! L'coute prolonge de musique un volume lev peut endommager votre acuit auditive. Pour rduire le risque de diminution de l'acuit auditive, baissez le volume un niveau modr et agrable et minimisez le temps d'coute des volumes levs. Pour votre scurit, rinitialisez toujours le volume avant d'utiliser un casque ou des couteurs. Le volume sonore de certains de ces appareils peut tre plus lev que d'autres, mme si le rglage est identique. Toute modification des paramtres audio ou d'galisation par dfaut peut entraner une augmentation du volume et doit tre effectue avec prcaution. Si l'ordinateur est quip d'un casque d'coute ou d'couteurs et qu'il porte le sigle GS , cette combinaison est en conformit avec la norme EN 50332-1. Pour votre propre scurit, les casques d'coute ou les couteurs utiliss avec ces produits doivent tre en conformit avec les limitations des casques de la norme EN 50332-2. Informations de scurit relatives au laser Pour les produits quips d'units optiques ou d'metteurs fibre optique. Ce produit peut tre quip d'un priphrique de stockage optique (c'est--dire un lecteur CD ou DVD) et/ou d'un metteur-rcepteur fibre optique. Ces lments comportent des lasers classs dans la catgorie des produits laser de classe 1, conformment la norme IEC/EN 60825-1, et sont conformes ses exigences. Chacun de ces produits laser est conforme aux rgulations 21 CFR 1040.10 et 1040.11 de la US FDA ou est conforme ces normes l'exception des diffrences conformment la notice des lasers No. 50, du 24 Juin 2007. AVERTISSEMENT ! L'utilisation de mthodes de contrle ou de rglage ou de procdures, autres que celles indiques dans ce document ou dans le manuel d'installation des appareils rayon laser, peut exposer l'utilisateur des radiations dangereuses. Pour rduire le risque d'exposition un rayonnement dangereux :

N'essayez pas d'ouvrir le botier du module. Il ne contient pas de pice rparable par l'utilisateur. N'effectuez pas de commandes, de rglages ou d'oprations sur l'appareil laser, autres que ceux indiqus dans le prsent manuel. Seuls les techniciens agrs HP sont autoriss rparer l'unit. Exigences relatives au bloc d'alimentation et au cordon d'alimentation Exigences relatives la mise la terre des alimentations de classe 1 Pour tre protg contre les courants de dfaut, l'quipement doit tre raccord une borne de terre. Branchez le cordon d'alimentation sur une prise secteur disposant d'une mise la terre raccorde la terre. Les cordons d'alimentation de remplacement ne fournissent pas une protection adquate contre les dfauts. Utilisez exclusivement le cordon d'alimentation fourni avec ce produit ou un cordon de remplacement agr par Hewlett-Packard. Avis sur le volume des casques et des couteurs 37 Danemark For tilslutning af de vrige ledere, se medflgende installationsvejledning. Finlande Laite on liitettv suojamaadoituskoskettimilla varustettuun pistorasiaan. Norvge Apparatet m kun tilkoples jordet stikkontakt. Sude Apparaten skall anslutas till jordat uttag, nr den ansluts till ett ntverk. Exigences relatives l'alimentation Les alimentations sur certains produits sont quipes de commutateurs de tension externes. La fonction de slection de tension sur le produit autorise son fonctionnement sous toute tension comprise entre 100-127 ou 200-240 volts secteur. Les alimentations sur les produits dpourvus de commutateurs de tension externes sont quipes de circuits internes qui dtectent la tension d'entre et basculent automatiquement sur la tension approprie. Pour des raisons de scurit, n'utilisez que l'adaptateur secteur fourni avec l'quipement ou un adaptateur de remplacement autoris par Hewlett-Packard. Les rfrences de remplacement sont disponibles l'adresse http://www.hp.com/cgi-bin/hpsupport/index.pl. Pour une utilisation en Norvge Ce produit est galement conu pour un systme lectrique informatique avec tension phase-phase de 230 V. 38 Chapitre 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Cordons d'alimentation requis Le cordon d'alimentation fourni avec le produit est conforme aux rglementations en vigueur dans le pays o le matriel a t achet l'origine. N'utilisez que le cordon d'alimentation fourni avec l'quipement ou un cordon d'alimentation de remplacement de Hewlett-Packard ou d'une source HP agre. Les rfrences de remplacement sont disponibles l'adresse http://www.hp.com/cgi-bin/

hpsupport/index.pl. Les cordons d'alimentation destins tre utiliss dans d'autres pays doivent respecter les normes du pays o vous utilisez le produit. Pour plus d'informations sur les exigences de cordon d'alimentation, contactez votre revendeur, votre mainteneur ou votre fournisseur de services agr HP. AVERTISSEMENT ! N'utilisez pas de cordons d'alimentation d'autres produits. Un mauvais cordon d'alimentation peut entraner un risque de dcharge lectrique ou d'incendie. Les exigences prsentes ci-aprs s'appliquent tous les pays. 1. 2. Le cordon d'alimentation doit tre homologu par une agence accrdite, responsable de l'valuation dans le pays o le cordon sera install. La longueur du cordon doit tre comprise entre 1,8 m (6 pieds) and 3,6 m (12 pieds). Pour un cordon d'alimentation de 2 m (6,56 pieds) ou moins, le diamtre du cordon doit tre d'au minimum 0,75 mm2 ou 18 AWG. Si le cordon d'alimentation dpasse 2 m (6,56 pieds), le diamtre du cordon doit tre d'au minimum 1 mm2 ou 16 AWG. Le cordon d'alimentation doit tre branch un endroit dgag o il ne risque pas d'tre pitin ou coinc par des objets. Accordez une attention particulire la fiche, la prise murale et l'endroit o le cordon sort du botier de l'appareil. AVERTISSEMENT ! N'utilisez pas ce produit avec un cordon d'alimentation endommag. Si le cordon d'alimentation est endommag de quelque manire que ce soit, remplacez-le immdiatement. Un cordon endommag peut entraner des risques de blessure. Spcifications du cordon d'alimentation pour le Japon Pour une utilisation au Japon, utilisez uniquement le cordon d'alimentation fourni avec l'appareil. ATTENTION : N'utilisez pas le cordon d'alimentation fourni avec ce produit pour alimenter d'autres appareils. Risque de pincement AVERTISSEMENT ! Observez les zones risque de pincement. N'approchez pas vos doigts des pices se refermant. Risque de pincement 39 Avis de scurit pour la Chine Chine : avis sur l'altitude Avis sur l'altitude pour les produits dont l'utilisation n'est pas certifie au-del de 5 000 m d'altitude 2000m ou 2000 Chine : avis sur une utilisation dans des conditions tropicales Avis pour les produits dont l'utilisation n'est pas certifie dans des conditions tropicales 40 Chapitre 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Avis d'acoustique pour l'Allemagne Le niveau de pression acoustique (LpA) est nettement en dessous de 70 dB(A) (position oprateur, fonctionnement normal, selon ISO 7779). Les donnes d'mission de bruit acoustique sont disponibles dans les dclarations IT ECO relatives au produit, l'adresse : http://www.hp.com/go/ted Schalldruckpegel (LpA) ist weit unterhalb 70 dB(A) (Benutzerposition, normaler Betrieb, nach ISO 7779) Die Schallemissionswerte der Produkte knnen in den produktbezogenen IT ECO Declarations auf folgender Internet Adresse gefunden werden: http://www.hp.com/go/ted Avis d'acoustique pour l'Allemagne 41 5 Avis sur les conditions d'utilisation pour les ordinateurs portables Ce chapitre prsente des avis relatifs l'environnement des diffrents pays ou rgions et des informations de conformit. Certains de ces avis ne s'appliquent peut-tre pas votre produit. Recyclage du matriel lectronique et de la batterie HP encourage ses clients recycler l'quipement lectronique usag, les cartouches d'impression HP d'origine et les batteries rechargeables. Pour plus d'informations sur les programmes de recyclage, consultez le site Web HP : http://www.hp.com/recycle. Mise au rebut des quipements par les utilisateurs Ce symbole indique que vous ne devez pas jeter votre produit avec les dchets mnagers. Il est de votre responsabilit de protger la sant et l'environnement et d'liminer votre quipement en le remettant une dchetterie effectuant le recyclage des quipements lectriques et lectroniques. Pour plus d'informations, prenez contact avec votre service d'limination des ordures mnagres ou ouvrez la page http://www.hp.com/recycle. Substances chimiques HP s'engage fournir ses clients des informations sur les substances chimiques contenues dans ses produits conformment aux dispositions lgales telles que REACH (rglement CE numro 1907/2006 du Parlement europen et du Conseil). Un rapport d'informations sur la conformit des substances chimiques de ce produit est disponible l'adresse : http://www.hp.com/go/reach. 42 Chapitre 5 Avis sur les conditions d'utilisation pour les ordinateurs portables Avis sur l'environnement pour la Chine http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/chinasepa.html http://www.hp.com.cn/hardwarerecycle

( http://www. sepa.gov.cn) Avis sur la restriction des substances dangereuses pour la Chine (RoHS) Tableau des substances/composants toxiques et dangereux et leur contenu conformment aux mthodes de gestion du contrle de la pollution par les produits d'informations lectroniques de Chine Substances et composants toxiques et dangereux Nom de la pice Plomb

(Pb) Mercure

(Hg) Cadmium

(Cd) Batterie Cbles Camra Chssis/Autre Lecteur de carte mmoire flash Lecteur de disquette Disque dur Casque Cartes PCA d'entre/

sortie Clavier cran LCD X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O Chrome hexavalent

(Cr(VI)) Diphnyles polybroms (PBB) thers diphnyles polybroms

(PBDE) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Avis sur l'environnement pour la Chine 43 Substances et composants toxiques et dangereux Nom de la pice Support (CD/DVD/

disquette) Mmoire Carte mre, processeur, dissipateurs thermiques Souris Unit de disque optique Priphrique d'amarrage en option Adaptateur d'alimentation Source d'alimentation Tlcommande Lecteur de carte Smart Card/Java Haut-parleurs externes Tuner TV Unit mmoire flash USB Concentrateur USB Webcam Rcepteur sans fil Cartes sans fil Plomb

(Pb) Mercure

(Hg) Cadmium

(Cd) O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Chrome hexavalent

(Cr(VI)) Diphnyles polybroms (PBB) thers diphnyles polybroms

(PBDE) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O : Indique que la quantit de substance toxique ou dangereuse contenue dans tous les matriaux homognes de cette pice se situe en dessous de la limite fixe par la norme SJ/T11363-2006. X : Indique que cette substance toxique ou dangereuse contenue dans au moins un matriel homogne utilis dans ce composant est au-dessus de la limite dans SJ/T11363-2006. Tous les lments du tableau accompagns d'un X sont conformes la directive europenne 2002/95/EC du 27 janvier 2003, dite RoHS (Restriction d'utilisation de substances dangereuses pour l'environnement relative aux dchets d'quipements lectriques et lectroniques) et ses amendements. REMARQUE : La dure d'utilisation cologique en anne, en rfrence, a t dtermine sur la base de conditions normales d'utilisation du produit, telles que la temprature et l'humidit. 44 Chapitre 5 Avis sur les conditions d'utilisation pour les ordinateurs portables

/

I/O PCA

(LCD) CD/DVD/

/Java USB USB

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB) (PBDE) X X X X X X X X X X X O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T11363-2006 X SJ/T11363-2006 X RoHS 2003 1 27 2002/95/EC

:

Avis sur la restriction des substances dangereuses pour la Chine (RoHS) 45 Dclaration de contenu de l'quipement pour le Japon Une norme japonaise, dfinie par la spcification JIS C 0950, 2008, oblige les fabricants fournir des dclarations de contenu de matriel pour certaines catgories de produits lectroniques proposes la vente aprs le 1 juillet 2006. Pour afficher la dclaration de matriel JIS C 0950 de ce produit, rendez-vous sur le site Web HP : http://www.hp.com/go/jisc0950. Loi du Mexique sur l'utilisation durable de l'nergie Ce produit a t tiquet conformment la loi du Mexique sur l'utilisation durable de l'nergie exigeant la divulgation de la consommation nergtique en utilisation normale (mode inactif) et en mode veille. Votre produit correspond l'une des nombreuses configurations de cette famille de modle ; la consommation nergtique du mode inactif de votre configuration spcifique peut tre diffrente des informations figurant sur l'tiquette. La consommation nergtique relle de votre produit peut tre suprieure ou infrieure la valeur signale sur l'tiquette de l'nergie du produit au Mexique en raison de facteurs tels que la configuration (composants et modules choisis) et de l'utilisation (tches ralises, logiciels installs et excuts, etc.). Rglementation EEE de la Turquie En conformit avec la rglementation EEE EEE Ynetmeliine Uygundur Restriction d'utilisation de substances dangereuses pour l'Ukraine L'quipement est conforme aux exigences relatives aux rglementations techniques, approuves par la rsolution du Cabinet des ministres de l'Ukraine date du 3 dcembre 2008 1057, en termes de restrictions quant l'utilisation de certaines substances dangereuses dans les quipements lectroniques et lectriques.

, 3 2008 1057. Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire Voir http://www.dtsc.ca.gov/hazardouswaste/perchlorate. La batterie de l'horloge en temps rel ou la pile bouton de ce produit est susceptible de contenir du perchlorate et peut ncessiter une manipulation particulire lors de son recyclage ou de sa mise au rebut en Californie. 46 Chapitre 5 Avis sur les conditions d'utilisation pour les ordinateurs portables 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Recyclage du matriel lectronique et des batteries Hewlett-Packard encourage ses clients recycler le matriel lectronique usag, les cartouches d'impression de marque HP et les batteries rechargeables. Pour plus d'informations sur les programmes de recyclage, consultez le site http://www.hp.com/recycle. Pour obtenir des informations concernant le recyclage du produit au Japon, reportez-vous http://www.hp.com/jp/hardwarerecycle/. Mise au rebut des quipements par les utilisateurs Ce symbole indique que vous ne devez pas jeter votre produit avec les dchets mnagers. Il est de votre responsabilit de protger la sant et l'environnement et d'liminer votre quipement en le remettant une dchetterie effectuant le recyclage des quipements lectriques et lectroniques. Pour plus d'informations, prenez contact avec votre service d'limination des ordures mnagres ou ouvrez la page http://www.hp.com/recycle. Conformit ENERGY STAR (certains modles) REMARQUE : Cette section s'applique uniquement aux produits portant le logo Energy Star. En tant que partenaire ENERGY STAR, Hewlett-Packard Company a suivi pour le produit le processus de qualification et de certification renforc labor de l'agence amricaine pour la protection de l'environnement afin de s'assurer que les produits portant le logo ENERGY STAR sont agrs ENERGY STAR conformment aux lignes directrices d'ENERGY STAR en matire d'utilisation efficace de l'nergie. Le logo suivant est prsent sur tous les ordinateurs qualifis ENERGY STAR. Recyclage du matriel lectronique et des batteries 47 Le programme ENERGY STAR pour ordinateurs a t cr par l'EPA pour promouvoir l'conomie d'nergie et rduire la pollution de l'air grce des quipements plus conergtiques au sein des maisons, bureaux et usines. Une des faons de rendre les produits plus efficaces sur le plan nergtique consiste rduire la consommation lorsqu'elle n'est pas gre par la fonction Gestion de l'alimentation de Microsoft Windows. La fonction de gestion de l'alimentation permet la mise en veille de l'ordinateur aprs une priode d'inactivit de l'utilisateur. Lorsqu'elle est utilise avec un moniteur ENERGY STAR, cette fonction prend galement en charge les fonctions similaires de gestion de l'alimentation du moniteur externe. Afin de bnficier de cette conomie d'nergie, la fonction de gestion de l'alimentation a t prdfinie pour une mise en veille de l'ordinateur et du moniteur aprs une certaine priode d'inactivit :

Ordinateur Moniteur/cran intgr Ordinateurs de bureau et postes de travail Aprs 30 minutes Aprs 15 minutes Clients lgers et ordinateurs de bureau Sans objet Aprs 15 minutes Il suffit que l'utilisateur se serve d'un des priphriques d'entre de l'ordinateur (ex. : souris, clavier, etc.) pour que l'ordinateur et l'cran quittent le mode veille et se rallument. Lorsque la fonction Wake On LAN d'veil par appel rseau est active, il est galement possible de rallumer l'ordinateur l'aide d'un signal rseau. Pour plus d'informations sur le potentiel d'conomie nergtique et financire de la fonction Gestion de l'alimentation, reportez-vous au site Web consacr la gestion de l'alimentation ENERGY STAR de l'EPA : http://www.energystar.gov/powermanagement. Pour plus d'informations sur le programme ENERGY STAR et ses bienfaits sur l'environnement, reportez-vous au site Web ENERGY STAR de l'EPA : http://www.energystar.gov. ATTENTION : L'utilisation de la fonction d'conomie d'nergie du moniteur avec des moniteurs qui ne sont pas qualifis ENERGY STAR peut entraner une distorsion de l'image en cas de fermeture automatique pour conomie d'nergie. REMARQUE : ENERGY STAR n'est pas pris en charge sur les ordinateurs de bureau et les postes de travail configurs avec certaines versions de Linux ou FreeDOS. En cas de restauration du systme d'exploitation, vous devrez galement redfinir les paramtres ENERGY STAR (le cas chant) une fois la restauration effectue. Sous Windows 7, pour contrler les paramtres d'alimentation par dfaut de votre ordinateur de bureau ou station de travail, slectionnez Dmarrer > Panneau de configuration, puis tapez Options d'alimentation dans la fentre de recherche. 48 Chapitre 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Sous Windows 8, pour contrler les paramtres d'alimentation par dfaut de votre ordinateur de bureau ou station de travail, tapez alimentation dans l'cran d'accueil, slectionnez Paramtres, puis slectionnez Options d'alimentation dans la liste des applications. Substances chimiques HP s'engage fournir ses clients des informations sur les substances chimiques contenues dans ses produits, conformment aux normes juridiques en vigueur telles que le rglement concernant l'enregistrement, l'valuation et l'autorisation des substances chimiques, ainsi que les restrictions applicables ces substances (REACH, rglement CE N 1907/2006 du Parlement europen et du Conseil). Des informations sur les substances chimiques contenues dans ce produit sont disponibles l'adresse http://www.hp.com/go/reach. Avis sur le mercure Ce produit HP peut contenir les matriaux suivants qui requirent un traitement spcial la fin de leur cycle de vie :

Le mercure contenu dans la lampe fluorescente de l'cran cristaux liquides (LCD) Il se peut que l'limination du mercure soit rglemente en raison de considrations environnementales. Pour obtenir des informations sur l'limination et le traitement de cette substance, veuillez contacter les autorits locales concernes ou l'Electronic Industries Alliance (EIA)

(http://www.eiae.org). Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire La batterie de l'horloge en temps rel est susceptible de contenir du perchlorate et peut ncessiter une manipulation particulire lors de son recyclage ou de sa mise au rebut en Californie. Reportez-

vous au site http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. Avis sur la restriction des substances dangereuses pour la Chine (RoHS) Substances chimiques 49

I/O PCAs

O: SJ/T11363-2006

X: SJ/T11363-2006

XRoHS 20031272002/95/EC

The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products 50 Chapitre 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Tableau 6-1 Toxic and Hazardous Substances and Elements Part Name Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybromi-

nated biphenyls

(PBB) Polybromi-

nated diphenyl ethers (PBDE) Motherboard, processor and heat sink X Memory I/O PCAs Power supply Keyboard Mouse Chassis/Other Fans Internal/External Media Reading Devices External Control Devices Cable Hard Disk Drive Display X X X X X X X X X X X X O O O O O O O O O O O O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. REMARQUE : The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity. Dclarations IT ECO Ordinateurs de bureau et clients lgers http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?

jumpid=reg_R1002_USEN Stations de travail http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html Dclarations IT ECO 51 Avis sur la restriction des substances dangereuses pour le Japon (RoHS) 2008 JISC0950 2006 7 http://www.hp.com/go/jisc0950 A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Ley para el Aprovechamiento Sustentable de la Energa de Mxico (loi du Mexique sur l'utilisation durable de l'nergie) Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal

(modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). REMARQUE : Esta ley no es aplicable a los workstations. This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). REMARQUE : Workstations are not labeled because the law is not applicable to the workstation product category. Rglementation EEE de la Turquie Trkiye Cumhuriyeti: EEE Ynetmeliine Uygundur 52 Chapitre 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles

(restriction d'utilisation de substances dangereuses pour l'Ukraine)

, 3 2008 1057. The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.

(restriction d'utilisation de substances dangereuses pour l'Ukraine) 53 Index A avis utilisation en vol 12 voyage 33 avis sur la mise au rebut des quipements 42 avis, ordinateurs de bureau, clients lgers et stations de travail avis sur la scurit des lasers 13 avis sur le niveau du volume, FCC (Federal Communications casque et couteurs 32 avis sur les appareils sans fil WWAN de Thalande 11 batterie 12, 46 batterie, remplacement par l'utilisateur 32 Brsil 5 Canada 5 clavier 33 cordon d'alimentation pour le Japon 18 cordons d'alimentation 18, 33 Core du Sud 10 environnement 42 ergonomie 8, 28 Japon 9 Macrovision Corporation 19 matriau compos de perchlorate 46 Mexique 10 mise au rebut des quipements 42 modem 14 niveau du volume du casque et des couteurs 32 restriction d'utilisation de Commission) 24 avis, ordinateurs portables FCC (Federal Communications Commission) 3 avis, restriction d'utilisation de substances dangereuses pour la Chine 43, 49 avis, restriction d'utilisation de substances dangereuses pour le Japon 52 avis de certification GS 8, 28 avis de restriction d'utilisation de substances dangereuses pour l'Ukraine 46 avis pour l'Union europenne 6, 26 avis pour la Core du Sud 10 avis pour le Brsil 5 avis pour le Canada 5 avis pour le Japon 9 avis pour Macrovision Corporation 19 substances dangereuses pour l'Ukraine 46 avis relatif au clavier 33 avis relatif aux appareils sans fil restriction d'utilisation de pour le Mexique 10 substances dangereuses pour la Chine 43, 49 avis sur l'altitude 34, 40 avis sur l'environnement pour la restriction d'utilisation de Chine 43 substances dangereuses pour le Japon 52 avis sur l'ergonomie 8, 28 avis sur la mise au rebut scurit des lasers 13 Singapour 11 Tawan 11 Union europenne 6, 26 batterie 46 batterie, remplacement par l'utilisateur 12 quipement 42 avis sur le niveau du volume du casque et des couteurs 32 avis sur les appareils sans fil pour Singapour 11 avis sur les appareils sans fil WWAN de Thalande 11 avis sur les conditions d'utilisation 42 avis sur les cordons d'alimentation 18, 33 avis sur les cordons d'alimentation pour le Japon 18 avis sur les dplacements 33 avis sur les modems 14 Canada 17 Japon 17 Nouvelle-Zlande 17 systme amricain 14 avis sur les modems pour la Nouvelle-Zlande 17 avis sur les modems pour le avis sur les modems pour le Canada 17 Japon 17 avis sur les modems pour les tats-Unis 14 avis sur les utilisations en vol 12 avis sur une utilisation dans des conditions tropicales 34, 40 avis tawanais 11 B batterie, avis 12, 32, 46 54 Index C conformit ENERGY STAR 12 D dclaration de conformit ordinateurs portables 4 dclaration de contenu de l'quipement pour le Japon 46 F FCC (Federal Communications Commission) avis sur les ordinateurs de bureau, clients lgers et stations de travail 24 avis sur les ordinateurs portables 3 cble des ordinateurs de bureau, clients lgers et stations de travail 24 cbles pour ordinateurs portables 3 modifications apportes aux ordinateurs portables 3 modifications des ordinateurs de bureau, clients lgers et stations de travail 24 L loi du Mexique sur l'utilisation durable de l'nergie 46 M matriel lectronique et de la batterie, recyclage 42 modifications, ordinateurs de bureau, clients lgers, stations de travail FCC (Federal Communications Commission) 24 N notice de mise la terre des cbles 34 notices restriction d'utilisation de substances dangereuses pour l'Ukraine 53 O ordinateurs portables, modifications FCC (Federal Communications Commission) 3 P priphrique matriel, identification 1 priphriques de rseau local sans fil 25 priphriques LAN sans fil 26 priphriques WLAN 4 R recyclage de la batterie 42 recyclage du matriel lectronique et de la batterie 42 restriction d'utilisation de substances dangereuses pour l'Ukraine 53 S support vocal 18 T tuner TV, notice de mise la terre des cbles 34 Index 55

Regulatory, Safety, and Environmental Notices User Guide Copyright 20152017 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Java is a registered trademark of Oracle and/or its affiliates. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Ninth Edition: November 2017 First Edition: August 2015 Document Part Number: 836854-009 About This Guide This guide provides regulatory, safety and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, desktops, thin clients, and personal workstations. To access the latest user guides or manuals for your product, go to http://www.hp.com/support. Select Find your product, and then follow the on-screen instructions. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. iii iv About This Guide Table of contents 1 Regulatory notices for notebook and tablet computers .................................................................................... 1 Accessing regulatory labels ................................................................................................................................... 1 Federal Communications Commission notice ....................................................................................................... 1 Modifications ....................................................................................................................................... 2 Cables .................................................................................................................................................. 2 Products with wireless LAN devices or HP Mobile Broadband Modules ............................................. 2 Brazil notice ........................................................................................................................................................... 3 Canada notices ....................................................................................................................................................... 3 European Union regulatory notices ....................................................................................................................... 4 Declaration of Conformity ................................................................................................................... 4 Products with radio functionality (EMF) ........................................................................... 4 Restrictions for products with radio functionality (select products only) ....................... 4 Radio frequency bands and maximum power levels (select products only) ................... 4 European telephone network declaration (Modem/Fax) ................................................. 5 Ergonomics notice ............................................................................................................. 5 Germany (English text) ................................................................................... 5 Germany (Deutscher text) .............................................................................. 5 Australia and New Zealand notice ......................................................................................................................... 5 China WWAN notice ................................................................................................................................................ 6 Japan notice ........................................................................................................................................................... 6 Wireless LAN, Wireless WAN, and Bluetooth certification markings ................................................ 6 Mexico notice ......................................................................................................................................................... 6 Singapore wireless notice ...................................................................................................................................... 7 South Korea notices ............................................................................................................................................... 7 Thailand WWAN wireless notice ............................................................................................................................ 7 Taiwan NCC notices ................................................................................................................................................ 7 Wireless LAN 802.11a devices ............................................................................................................ 7 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices .............................................. 8 Airline travel notice ................................................................................................................................................ 8 User-replaceable battery notices .......................................................................................................................... 8 Factory-sealed battery notices ............................................................................................................................. 8 Laser compliance ................................................................................................................................................... 8 Modem notices ....................................................................................................................................................... 9 Telecommunications device approvals ............................................................................................... 9 U.S. modem statements ...................................................................................................................... 9 U.S. modem declarations .................................................................................................................. 10 v Canada modem statements .............................................................................................................. 12 Japan modem statements ................................................................................................................ 12 New Zealand modem statements ..................................................................................................... 12 Voice support .................................................................................................................. 13 Power cord notice ................................................................................................................................................ 13 Japan power cord notice ................................................................................................................... 13 DC plug of external HP power supply ................................................................................................ 13 Macrovision Corporation notice ........................................................................................................................... 13 2 Regulatory notices for desktops, thin clients, and personal workstations ........................................................ 14 Modem notices ..................................................................................................................................................... 14 Telecommunications device approvals ............................................................................................. 14 U.S. modem statements .................................................................................................................... 14 Canadian modem statements ........................................................................................................... 15 Japanese modem statements ........................................................................................................... 15 New Zealand modem statements ..................................................................................................... 16 Voice support .................................................................................................................. 16 Electromagnetic compatibility notices ................................................................................................................ 16 Federal Communications Commission notice ................................................................................... 17 Modifications ................................................................................................................... 17 Cables .............................................................................................................................. 17 Products with wireless LAN devices ............................................................................... 17 Australia telecom statement ............................................................................................................ 18 Brazil notice ....................................................................................................................................... 18 Canadian notice ................................................................................................................................. 18 European Union regulatory notices .................................................................................................. 19 Declaration of Conformity .............................................................................................. 19 Products with radio functionality (EMF) ...................................................... 19 Restrictions for products with radio functionality (select products only) .............................................................................................................. 19 Radio frequency bands and maximum power levels (select products only) .............................................................................................................. 19 European telephone network declaration (Modem/Fax) ............................................... 20 Ergonomics notice .......................................................................................................... 20 Germany (English text) ................................................................................. 20 Germany (Deutscher text) ............................................................................ 20 Japan notice ....................................................................................................................................... 20 Japan power cord notice ................................................................................................. 21 Wireless LAN and Bluetooth certification markings ....................................................... 21 Mexico notice ..................................................................................................................................... 21 South Korea notices .......................................................................................................................... 21 vi Taiwan NCC notices ............................................................................................................................ 21 Wireless LAN 802.11a devices ........................................................................................ 21 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices ......................... 22 3 Safety notices for notebook and tablet computers ......................................................................................... 23 Heat-related safety warning notice .................................................................................................................... 23 Potential safety conditions notice ....................................................................................................................... 23 Battery notices ..................................................................................................................................................... 23 Headset and earphone volume level notice ........................................................................................................ 24 Power cord notices .............................................................................................................................................. 24 Brazil notice ....................................................................................................................................... 24 Cleaning the keyboard ......................................................................................................................................... 24 Travel notice ........................................................................................................................................................ 24 China safety notices ............................................................................................................................................. 25 China: Altitude notice ........................................................................................................................ 25 China: Tropical warning notice .......................................................................................................... 25 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................................... 25

......................................................................................................................................... 25 4 Safety notices for desktops, thin clients, and personal workstations ............................................................... 26 Important safety information ............................................................................................................................. 26 Installation conditions ......................................................................................................................................... 27 Battery notices ..................................................................................................................................................... 27 Fan notices ........................................................................................................................................................... 28 Headset and earphone volume level notice ........................................................................................................ 28 Laser safety ......................................................................................................................................................... 28 Power supply and power cord set requirements ................................................................................................ 28 Power supply class I grounding requirements .................................................................................. 28 Brazil notice .................................................................................................................... 29 Denmark .......................................................................................................................... 29 Finland ............................................................................................................................. 29 Norway ............................................................................................................................ 29 Sweden ............................................................................................................................ 29 Power supply requirements .............................................................................................................. 29 For use in Norway ........................................................................................................... 29 Power cord set requirements ............................................................................................................ 29 Japan power cord requirements ....................................................................................................... 30 Pinch hazard ........................................................................................................................................................ 30 TV antenna connectors protection ...................................................................................................................... 30 External television antenna grounding ............................................................................................ 30 Lightning protection .......................................................................................................................... 30 vii Note to CATV system installer ........................................................................................................... 31 China safety notices ............................................................................................................................................. 32 China: Altitude notice ........................................................................................................................ 32 China: Tropical warning notice .......................................................................................................... 32 Germany acoustics notice .................................................................................................................................... 33

......................................................................................................................................... 33 5 Environmental notices for notebook and tablet computers ............................................................................. 34 Electronic hardware, packaging and battery recycling ....................................................................................... 34 Disposal of waste equipment by users ............................................................................................................... 34 Brazil alkaline battery disposal ........................................................................................................................... 34 Brazil hardware recycling information ................................................................................................................ 34 ENERGY STAR Certification (select models only) ............................................................................................... 35 Chemical substances ........................................................................................................................................... 36 China environmental notices ............................................................................................................................... 36 China PC energy label .......................................................................................................................................... 36 China restriction of hazardous substances (RoHS) ............................................................................................. 39 The Table of Hazardous Substances/Elements and their Content ................................................... 39

........................................................................................... 40

(RoHS) ......................................................................................................... 41

....................................................................................................... 41 India restriction of hazardous substances (RoHS) .............................................................................................. 42 Information for European Union Commission Regulation 1275/2008 .............................................................. 43 IT ECO declarations .............................................................................................................................................. 43 Japan restriction of hazardous substances (RoHS) ............................................................................................ 43 Mexico Sustainable Energy Use Law ................................................................................................................... 43 Turkey EEE regulation .......................................................................................................................................... 43 Ukraine restriction of hazardous substances (RoHS) ......................................................................................... 44 Perchlorate materialspecial handling may apply ........................................................................................... 44 TCO Certified ........................................................................................................................................................ 45 TCO Certified Edge ................................................................................................................................................ 46 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-Ones ................................ 47 Electronic hardware, packaging and battery recycling ....................................................................................... 47 Disposal of waste equipment by users ............................................................................................................... 47 Brazil alkaline battery disposal ........................................................................................................................... 47 Brazil hardware recycling information ................................................................................................................ 47 ENERGY STAR Certification (select models only) ............................................................................................... 48 Chemical substances ........................................................................................................................................... 49 Mercury statement .............................................................................................................................................. 49 Perchlorate materialspecial handling may apply ............................................................................................. 49 viii China environmental notices ............................................................................................................................... 49 China PC energy label .......................................................................................................................................... 50 China restriction of hazard substances (ROHS) ................................................................................................... 53 The Table of Hazardous Substances/Elements and their Content ................................................... 53

........................................................................................... 54

(RoHS) ......................................................................................................... 56

....................................................................................................... 56 India restriction of hazardous substances (RoHS) .............................................................................................. 57 Information for European Union Commission Regulation 1275/2008 .............................................................. 57 IT ECO declarations .............................................................................................................................................. 57 Japan restriction of hazardous substances (RoHS) ............................................................................................ 57 Mehiki zakon o uporabi trajnostne energije ...................................................................................................... 57 Turkey EEE regulation .......................................................................................................................................... 58 Omejevanje uporabe nekaterih nevarnih snovi (RoHS) za Ukrajino ................................................................... 58 TCO Certified ........................................................................................................................................................ 59 TCO Certified Edge ................................................................................................................................................ 60 Index ............................................................................................................................................................. 61 ix x 1 Regulatory notices for notebook and tablet computers This chapter provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Accessing regulatory labels Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be physically located on the bottom of the computer, inside the battery bay (select models only), under the removable service door (select models only), on the back of the display, or on the wireless or modem module. Some products may also provide electronic regulatory labels (e-labels) that can be accessed through the system BIOS. NOTE: Electronic labels are not available on all products. NOTE: Devices not for sale or use in the United States may not contain a FCC ID. To view electronic regulatory labels:

1. 2. 3. Turn on or restart the computer. Press esc or f10 to enter Computer Setup. Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press enter. To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and then press OK. NOTE: The list of available electronic label items varies depending on the computer model and installed devices. To exit Computer Setup menus without saving your changes:

Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter. 4. 5. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to Accessing regulatory labels 1 radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product:

Write to:

HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 Call HP at 650-857-1501 or Email techregshelp@hp.com To identify this product, refer to the part, series, or model number found on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. 2 Chapter 1 Regulatory notices for notebook and tablet computers WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm

(12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Ao operar o dispositivo a uma distncia muito prxima do seu corpo, utilize um acessrio de armazenamento no metlico para posicionar o dispositivo a uma distncia mnima de 1,5 cm do corpo. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm

(12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. CAUTION: When using IEEE 802.11a, n, or ac wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-

channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. Brazil notice 3 European Union regulatory notices Declaration of Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

RED 2014/53/EU; Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/certificates

(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany. Email techregshelp@hp.com Products with radio functionality (EMF) This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product. Restrictions for products with radio functionality (select products only) CAUTION: IEEE 802.11x wireless LAN with 5.155.35 GHz frequency band is restricted for indoor use only for all countries reflected in the matrix. Using this WLAN application outdoors might lead to interference issues with existing radio services. CAUTION: Fixed outdoor installations for WiGig application (5766 GHz frequency band) are excluded for all countries reflected in the matrix. Radio frequency bands and maximum power levels (select products only) Radio Technology Bluetooth; 2,4 GHz NFC; 13,56 MHz WLAN Wi-Fi 802.11x; 2,4 GHz WLAN Wi-Fi 802.11x; 5 GHz WWAN 4G LTE; 700/800/900/1800/2100/2600 MHz WWAN 3G UTMS; 900/2100 MHz WWAN 2G GSM GPRS EDGE; 900 MHz Maximum Transmit Power EIRP (mW) 100 10 100 200 200 250 2000 4 Chapter 1 Regulatory notices for notebook and tablet computers Radio Technology WWAN 2G GSM GPRS EDGE; 1800 MHz WiGig 802.11ad; 60 GHz Wireless Charging Qi; 110kHz - 205kHz Maximum Transmit Power EIRP (mW) 1000 316 Less than 1 NOTE: Use only HP-supported software drivers and correct country settings to ensure compliance. European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the applicable Directive and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/

regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. Ergonomics notice Germany (English text) When a mobile computer is used at the office workstation for display work tasks where the Visual Display Unit

(VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000 (voluntary GS certification) Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements. Without external keyboards, they are suitable only for short-time use of VDU tasks. During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur, which result in reduced readability. Germany (Deutscher text) Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG

(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. Ref: EK1-ITB 2000 (freiwillige GS Zertifizierung) Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Bei mobiler Nutzung mit ungnstigen Lichtverhltnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschrnkungen der Lesbarkeit der dargestellten Zeichen kommen. Australia and New Zealand notice This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. Australia and New Zealand notice 5 China WWAN notice Japan notice V-2 VCCI32-1 5GHz Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. Some products may use electronic regulatory labels (e-labels). To view the certification mark and numbers on an e-label, please refer to the previous Accessing regulatory labels section. e e Mexico notice Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. The regulatory model number for this product is on the regulatory label. 6 Chapter 1 Regulatory notices for notebook and tablet computers If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. The regulatory model number for this product is on the regulatory label. Singapore wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. South Korea notices Thailand WWAN wireless notice This telecom equipment has complied with NTC regulations. Taiwan NCC notices Wireless LAN 802.11a devices Singapore wireless notice 7 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP Web site at http://www.hp.com/

recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. Factory-sealed battery notices The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. 8 Chapter 1 Regulatory notices for notebook and tablet computers This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007. Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS. Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Modem notices 9 Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-

distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

10 Chapter 1 Regulatory notices for notebook and tablet computers Modem notices 11 Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. b. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). d. 12 Chapter 1 Regulatory notices for notebook and tablet computers Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/

18AWG, and the length of the cord must be between 1.0 m (3.2 ft) and 2 m (6.56 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japan power cord notice DC plug of external HP power supply Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Power cord notice 13 2 Regulatory notices for desktops, thin clients, and personal workstations Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (Ethernet network) jack. SAVE THESE INSTRUCTIONS. Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. 14 Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-

distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. Canadian modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below:

Modem notices 15 New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. b. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). d. Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Electromagnetic compatibility notices This guide provides country- and region-specific nonwireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous 16 Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Increase the separation between the equipment and the receiver. Reorient or relocate the receiving antenna. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product:

Write to:

HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 Call HP at 650-857-1501 or Email techregshelp@hp.com To identify this product, refer to the part, series, or model number found on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP Inc. may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations. Products with wireless LAN devices This product may be equipped with a wireless LAN device. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Electromagnetic compatibility notices 17 WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the wireless antennae, refer to the documentation included with the computer. Australia telecom statement The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of AS/CA S008. WARNING! Modems without integral RJ11 connector that are shipped with this computer should not be installed in any other device. This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. CAUTION: A alimentao de energia predefinida para 220/230Vv. Se voc possuir tomada eltrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Canadian notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, this device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation: To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the wireless antennae, refer to the documentation included with the computer. CAUTION: When using IEEE 802.11a, n, or ac wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-

channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antenna for this device is not replaceable. Any attempt at user modification may damage your computer. 18 Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations European Union regulatory notices Declaration of Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

RED 2014/53/EU; Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/certificates

(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany. Email techregshelp@hp.com Products with radio functionality (EMF) This product incorporates a radio transmitting and receiving device. For computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product. Restrictions for products with radio functionality (select products only) CAUTION: IEEE 802.11x wireless LAN with 5.155.35 GHz frequency band is restricted for indoor use only for all countries reflected in the matrix. Using this WLAN application outdoors might lead to interference issues with existing radio services. CAUTION: Fixed outdoor installations for WiGig application (5766 GHz frequency band) are excluded for all countries reflected in the matrix. Radio frequency bands and maximum power levels (select products only) Radio Technology Bluetooth; 2,4 GHz NFC; 13,56 MHz WLAN Wi-Fi 802.11x; 2,4 GHz WLAN Wi-Fi 802.11x; 5 GHz WWAN 4G LTE; 700/800/900/1800/2100/2600 MHz WWAN 3G UTMS; 900/2100 MHz WWAN 2G GSM GPRS EDGE; 900 MHz Maximum Transmit Power EIRP (mW) 100 10 100 200 200 250 2000 Electromagnetic compatibility notices 19 Radio Technology WWAN 2G GSM GPRS EDGE; 1800 MHz WiGig 802.11ad; 60 GHz Wireless Charging Qi; 110kHz - 205kHz Maximum Transmit Power EIRP (mW) 1000 316 Less than 1 NOTE: Use only HP-supported software drivers and correct country settings to ensure compliance. European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the applicable Directive and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/

regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. This equipment has been designed to work with analogue DTMF Networks. This equipment may have internetworking difficulties in PSTN networks that only support Pulse Dialing. Please consult with your network operator for further assistance. Ergonomics notice Germany (English text) A computer system comprising HP brand products meets the applicable ergonomic requirements if all affected constituent products bear the "GS" approval mark, for example Business Desktop PC, keyboard, PC-

mouse and monitor. Germany (Deutscher text) Ein aus HP Produkten bestehendes Computersystem erfllt die anwendbaren ergonomischen Anforderungen, wenn alle verwendeten Komponenten das GS Zeichen tragen, wie z. B. Business Desktop PC, Tastatur, PC-

Maus und Bildschirm. Japan notice V-2 VCCI32-1 5GHz 20 Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations Japan power cord notice Wireless LAN and Bluetooth certification markings If this device contains radio equipment, it is certified radio equipment. Some products may use electronic regulatory labels (e-labels). To view the certification mark and numbers on an e-label, please refer to the previous Accessing regulatory labels section. e e Mexico notice Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. South Korea notices Taiwan NCC notices Wireless LAN 802.11a devices Electromagnetic compatibility notices 21 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices 22 Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations 3 Safety notices for notebook and tablet computers WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC/EN 60950). Potential safety conditions notice If you notice any of the following conditions (or if you have other safety concerns), do not use the computer:

crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance. Battery notices WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. WARNING! Keep new and used batteries away from children. WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Fast charging may not be available for non-compatible or non-HP batteries. WARNING! Do not ingest battery, a Chemical Burn Hazard. WARNING! This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. WARNING!

from children. If the battery compartment does not close securely, stop using the product and keep it away Heat-related safety warning notice 23 If you think batteries might have been swallowed or placed inside any part of the body, seek WARNING!

immediate medical attention. WARNING!

explosion or the leakage of flammable liquid or gas. WARNING! A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Leaving a battery in an extremely high temperature surrounding environment can result in an Headset and earphone volume level notice WARNING!

To prevent possible hearing damage, do not listen at high volume levels for long periods. Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level. The use of factors influencing the ear-/headphones output other than those specified by the manufacturer (e.g. operating system, equalizer software, firmware, driver) may increase the ear-/headphones output voltage and therefore the sound pressure level. Power cord notices WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet. If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. Brazil notice Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia eltrica que possua aterramento (trs pinos), conforme a norma nbr abnt 5410,visando a segurana dos usurios contra choques eltricos. Cleaning the keyboard WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. 24 Chapter 3 Safety notices for notebook and tablet computers China safety notices China: Altitude notice Altitude warning for products not certified for use in >5000 m Icon Description China: Tropical warning notice Tropical warning for products not certified for use in tropical regions. Icon Description Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system.

:

(1) 30 10

(2) 2 2 1 China safety notices 25 4 Safety notices for desktops, thin clients, and personal workstations Important safety information WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet. If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it. Install the computer near an AC outlet. The AC power cord is your computers main AC disconnecting device and must be easily accessible at all times. For your safety, the power cord provided with your computer has a grounded plug. Always use the power cord with a properly grounded wall outlet, to avoid the risk of electrical shock. To reduce the possibility of an electric shock from the telephone network, plug your computer into the AC outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your computer from the AC power outlet. Always disconnect the modem cord from the telephone system before installing or removing your computer cover. Do not operate the computer with the cover removed. For your safety, always unplug the computer from its power source and from any telecommunications systems (such as telephone lines), networks, or modems before performing any service procedures. Failure to do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power supply and modem of this product. As a safety precaution, if the system power load exceeds the specific configurations capacities, the system may temporarily disable some USB ports. CAUTION:

the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/

region where it was initially sold. Changing the voltage select switch to the incorrect position can damage your computer and void any implied warranty. If your computer is provided with a voltage select switch for use in a 115 or 230 V power system, This product has not been evaluated for connection to an IT power system (an AC distribution system with no direct connection to earth, according to IEC/EN 60950). 26 Chapter 4 Safety notices for desktops, thin clients, and personal workstations Installation conditions See installation instructions before connecting this equipment to the input supply. WARNING! The equipment must be provided with a proper AC protective earth (PE) ground connection. Energized and moving parts may be inside the computer. Disconnect power to the equipment before removing the enclosure. Replace and secure the enclosure before re-energizing the equipment. Battery notices WARNING! The product may contain an internal lithium manganese dioxide, vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire and burns if the battery pack is not handled properly. WARNING! Do not attempt to recharge the battery. WARNING! Do not expose to temperatures higher than 60 C (140 F). WARNING! Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! Replace only with the HP spare designated for this product. WARNING! Do not ingest battery, a Chemical Burn Hazard. WARNING! This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. WARNING! Keep new and used batteries away from children. WARNING!

from children. WARNING!

immediate medical attention. WARNING!

explosion or the leakage of flammable liquid or gas. WARNING! A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Leaving a battery in an extremely high temperature surrounding environment can result in an If the battery compartment does not close securely, stop using the product and keep it away If you think batteries might have been swallowed or placed inside any part of the body, seek Icon Description Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to HP, an authorized HP partner, or their agents. Icon Description The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 of the Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions. Contact a qualified Taiwanese recycler for proper battery disposal. Installation conditions 27 Fan notices WARNING!

WARNING! Keep body parts away from moving parts. WARNING! Keep body parts away from fan blades. WARNING! Keep body parts out of the motion path. Headset and earphone volume level notice WARNING!

To prevent possible hearing damage, do not listen at high volume levels for long periods. Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level. The use of factors influencing the ear-/headphones output other than those specified by the manufacturer (e.g. operating system, equalizer software, firmware, driver) may increase the ear-/headphones output voltage and therefore the sound pressure level. Laser safety For products equipped with optical drives or fiber optic transceivers. This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the standard IEC/EN 60825-1 and comply with its requirements. Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser products installation guide may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. Allow only HP Authorized Service technicians to repair the unit. Power supply and power cord set requirements Power supply class I grounding requirements For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the system power cord into an AC outlet that provides a ground connection. Substitute cords may not provide adequate fault protection. Only use the power cord supplied with this product or an HP Inc. authorized replacement. 28 Chapter 4 Safety notices for desktops, thin clients, and personal workstations Brazil notice Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia eltrica que possua aterramento (trs pinos), conforme a norma nbr abnt 5410,visando a segurana dos usurios contra choques eltricos. Denmark Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Finland Norway Sweden Laite on liitettv suojakoskettimilla varustettuun pistorasiaan. Apparatet m tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Power supply requirements The power supplies on some products have external power switches. The voltage select switch feature on the product permits it to operate from any line voltage between 100-127 or 200-240 volts AC. Power supplies on those products that do not have external power switches are equipped with internal circuits that sense the incoming voltage and automatically switch to the proper voltage. For safety reasons, use only the AC adapter provided with the unit or an authorized replacement adapter from HP Inc. Replacement part numbers may be found at http://www.hp.com/cgi-bin/hpsupport/index.pl. For use in Norway This product is also designed for an IT power system with phase-to-phase voltage 230V. Power cord set requirements The power cord set received with the product meets the requirements for use in the country where the equipment was originally purchased. Use only the power cord provided with the unit or an authorized replacement power cord from HP Inc. or an approved HP Inc. source. Replacement part numbers may be found at http://www.hp.com/cgi-bin/hpsupport/index.pl. Power cord sets for use in other countries must meet the requirements of the country where you use the product. For more information on power cord set requirements, contact your authorized HP dealer, reseller, or service provider. WARNING! Do not use power cords from other products. Mismatched power cords may result in a shock and fire hazard. The requirements listed below are applicable to all countries:

1. 2. The power cord must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be installed. The length of the power cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). For a power cord 2.0 m

(6.56 feet) or less, the diameter of the wire must be a minimum of 0.75 mm2 or 18AWG. If the power cord is longer than 2.0 m (6.56 feet), the diameter of the wire must be a minimum of 1.0 mm2 or 16AWG. Power supply and power cord set requirements 29 The power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. WARNING! Do not operate this product with a damaged power cord set. If the power cord set is damaged in any manner, replace it immediately. Damaged cords may result in user exposure to hazards. Japan power cord requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. Pinch hazard WARNING! Observe pinch hazard areas. Keep fingers away from closing parts. TV antenna connectors protection External television antenna grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is electrically grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper electrical grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-

discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Lightning protection For added protection of any product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product from lightning and power line surges. 30 Chapter 4 Safety notices for desktops, thin clients, and personal workstations Table 4-1 Antenna Grounding Reference Grounding Component 1 2 3 4 5 6 7 Electric Service Equipment Power Service Grounding Electrode System (NEC Art 250, Part III) Ground Clamps Grounding Conductors (NEC Section 810.21) Antenna Discharge Unit (NEC Section 810.20) Ground Clamp Antenna Lead-in Wire Note to CATV system installer This reminder is provided to call the CATV systems installers attention to section 820.93 of the National Electric Code, which provides guidelines for proper grounding and in particular, specify that the Coaxial cable shield shall be connected to grounding system of the building, as close to the point of cable entry as practical. TV antenna connectors protection 31 China safety notices China: Altitude notice Altitude warning for products not certified for use in >5000 m Icon Description China: Tropical warning notice Tropical warning for products not certified for use in tropical regions. Icon Description 32 Chapter 4 Safety notices for desktops, thin clients, and personal workstations Germany acoustics notice Sound pressure level (LpA) is far below 70dB(A) (operator position, normal operation, according to ISO 7779) Product noise emission data can be found in the product related IT ECO Declarations at Internet address:

http://www.hp.com/go/ted Schalldruckpegel (LpA) ist weit unterhalb 70 dB(A) (Benutzerposition, normaler Betrieb, nach ISO 7779) Die Schallemissionswerte der Produkte knnen in den produktbezogenen IT ECO Declarations auf folgender Internet Adresse gefunden werden: http://www.hp.com/go/ted

:

(1) 30 10

(2) 2 2 1 Germany acoustics notice 33 5 Environmental notices for notebook and tablet computers This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware, packaging and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle. For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/. Disposal of waste equipment by users This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle. Brazil alkaline battery disposal Icon Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Brazil hardware recycling information Icon Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. 34 Chapter 5 Environmental notices for notebook and tablet computers Icon Description No descarte o produto eletrnico em lixo comum Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar ENERGY STAR Certification (select models only) ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or requirements set by the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, HP Inc. has followed the U.S. EPAs enhanced product certification process to ensure that products marked with the ENERGY STAR logo are ENERGY STAR certified per the applicable ENERGY STAR guidelines. The following logo appears on all ENERGY STAR-certified computers:

A key ENERGY STAR requirement for computer products is power management features that significantly reduce energy consumption when the product is not in use. Power management allows a computer to automatically enter a low power sleep mode, or other low power mode, after a defined period of inactivity. The power management features have been preset as follows when the computer is operating on AC power:

Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode Notebooks, Mobile Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Product will exit sleep mode when the power/sleep button is pressed. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. Tablets/Slates Less than or equal to 1 minute Not applicable Not applicable For computers that support an always-on, always-connected use profile where internet access is available

(such as tablets and slates), alternative low power modes - such as Short or Long Idle modes (as defined in the ENERGY STAR Computer Program Requirements) are provided that consume very little power (</= 10 Watts) and when applicable, maximize product battery life. These alternative low power modes are dynamic, with the display sleep mode activated within 1 minute of user inactivity. The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/

powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. ENERGY STAR Certification (select models only) 35 ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. China environmental notices China PC energy label In accordance with The Regulation of the Implementation on China Energy Label for Microcomputers, this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012. 1. Energy Efficiency Grades The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card. For products of any grade, the TEC should not exceed the value specified in the following table:

Product Type Desktop microcomputer, AIO Category A Category B Category C Category D TEC (kilowatt hour) Grade 1 98.0+Efa 125.0+Efa 159.0+Efa 184.0+Efa Grade 2 148.0+Efa 175.0+Efa 209.0+Efa 234.0+Efa Grade 3 198.0+Efa 225.0+Efa 259.0+Efa 284.0+Efa 36 Chapter 5 Environmental notices for notebook and tablet computers Product Type Portable Computer TEC (kilowatt hour) Category A Category B Category C 20.0+Efa 26.0+Efa 54.5+Efa 35.0+Efa 45.0+Efa 75.0+Efa 45.0+Efa 65.0+Efa 123.5+Efa NOTE: Efa is the sum of power factor of product additional functions. 2. 3. Typical Energy Consumption The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to

"The Regulation of the Implementation on China Energy Label for Microcomputers". Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label. Product Category The product category is determined by the standard according to the microcomputers configuration. The categorization of products complies with the regulations in the following table:

Product Type Category A Category B Category C Category D Configuration Description Desktop microcomputer, AIO Portable Computer The desktop microcomputer and AIO whose configuration is out of the scope of Category B, C, and D The portable computer whose configuration is out of the scope of Category B and C CPU physical core number of 2, and system memory of not less than 2GB A Discrete GPU CPU physical core number of over 2, with at least one of the following features:

1. 2. System memory of not less than 2 GB A Discrete GPU The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with Frame Buffer Width not less than 128-bit. CPU physical core number of not less than 4, with at least one of the following features:

1. 2. System memory of not less than 4 GB A Discrete GPU with Frame Buffer Width not less than 128-bit For more details on the specification, please refer to the standard GB28380-2012. China PC energy label 37 38 Chapter 5 Environmental notices for notebook and tablet computers China restriction of hazardous substances (RoHS) The Table of Hazardous Substances/Elements and their Content As required by Chinas Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Products Part Name Battery Cables Camera Chassis/Other Flash memory card reader Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power pack Power supply Remote control Smart card/Java card reader Speakers, external TV tuner Hazardous Substances Lead (Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X X X X X X O X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O China restriction of hazardous substances (RoHS) 39 Hazardous Substances Part Name USB flash memory drive USB hub Web camera Wireless receiver Wireless cards Lead (Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O This form has been prepared in compliance with the provisions of SJ/T 11364. O: Indicates that the content of said hazardous substance in all of the homogenous materials in the component is within the limits required by GB/T 26572. X: Indicates that the content of said hazardous substance exceeds the limits required by GB/T 26572 in at least one homogenous material in the component. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

/

I/O PCA

(LCD) CD/DVD/

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) X X X X X X X X X X X O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 40 Chapter 5 Environmental notices for notebook and tablet computers

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) O O O O O O O O O O O O O O O O O

/Java USB USB X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 X RoHS

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Unit Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (CR+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Cables

(RoHS) 41 Restricted substances and its chemical symbols

/

Chassis/Other

/

I/O PCAs

(LCD) Liquid crystal display (LCD) panel Memory Motherboard, processor, heat sinks Power pack Power supply Storage Devices Wireless Devices 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption. http://www.hp.com/support To access the latest user guides or manuals for your product, go to http://www.hp.com/support. Select Find your product, and then follow the on-screen instructions. India restriction of hazardous substances (RoHS) This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the "India E-waste Rule 2016." It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 42 Chapter 5 Environmental notices for notebook and tablet computers weight % and 0.01 weight % for cadmium, except where allowed pursuant to the exemptions set in Schedule 2 of the Rule. Information for European Union Commission Regulation 1275/2008 To locate product power consumption data, including when the product is in networked standby with all wired network ports connected and wireless devices connected, refer to section P14 Additional information of the product IT ECO Declaration at http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/

itecodesktop-pc.html. Where applicable, activate and deactivate a wireless network using the instructions included in the product user guide or the operating system. Information is also available at http://www.hp.com/support. IT ECO declarations For notebook PCs, go to http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/

iteconotebook-o.html. Japan restriction of hazardous substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Mexico Sustainable Energy Use Law This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). Turkey EEE regulation Information for European Union Commission Regulation 1275/2008 43 Ukraine restriction of hazardous substances (RoHS) The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment. Perchlorate materialspecial handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. 44 Chapter 5 Environmental notices for notebook and tablet computers TCO Certified This section applies only to products bearing the TCO Certified logo. TCO Certified 45 TCO Certified Edge This section applies only to products bearing the TCO Certified Edge logo. 46 Chapter 5 Environmental notices for notebook and tablet computers 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-

Ones This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware, packaging and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle. For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/. Disposal of waste equipment by users Icon Description This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle. Brazil alkaline battery disposal Icon Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Brazil hardware recycling information Icon Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas Electronic hardware, packaging and battery recycling 47 Icon Description No descarte o produto eletrnico em lixo comum em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar ENERGY STAR Certification (select models only) ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or requirements set by the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, HP Inc. has followed the U.S. EPAs enhanced product certification process to ensure that products marked with the ENERGY STAR logo are ENERGY STAR certified per the applicable ENERGY STAR guidelines. The following logo appears on all ENERGY STAR-certified computers:

A key ENERGY STAR requirement for computer products is power management features that significantly reduce energy consumption when the product is not in use. Power management allows a computer to automatically enter a low power sleep mode, or other low power mode, after a defined period of inactivity. The power management features have been preset as follows when the computer is operating on AC power:

Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode Desktops, Integrated Desktops, Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Thin clients Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes when sleep mode is supported by the operating system (varies by model) Product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. When sleep mode is supported by operating system product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/

powermanagement. 48 Chapter 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-Ones Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No. 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. Mercury statement This statement applies to All-in-One computers with built-in display panels that do not use LED backlighting. This HP product may contain the following material that might require special handling at end-of-life:

Mercury in the fluorescent lamp in the display LCD Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA)

(http://www.eiae.org). Perchlorate materialspecial handling may apply The computers real-time clock battery may contain perchlorate and may require special handling when recycled or disposed of in California. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. China environmental notices Chemical substances 49 China PC energy label In accordance with The Regulation of the Implementation on China Energy Label for Microcomputers, this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012. 1. Energy Efficiency Grades The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card. For products of any grade, the TEC should not exceed the value specified in the following table:

Product Type Desktop microcomputer, AIO Category A Portable Computer Category B Category C Category D Category A Category B Category C TEC (kilowatt hour) Grade 1 98.0+Efa 125.0+Efa 159.0+Efa 184.0+Efa 20.0+Efa 26.0+Efa 54.5+Efa Grade 2 148.0+Efa 175.0+Efa 209.0+Efa 234.0+Efa 35.0+Efa 45.0+Efa 75.0+Efa Grade 3 198.0+Efa 225.0+Efa 259.0+Efa 284.0+Efa 45.0+Efa 65.0+Efa 123.5+Efa NOTE: Efa is the sum of power factor of product additional functions. 2. 3. Typical Energy Consumption The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to The Regulation of the Implementation on China Energy Label for Microcomputers". Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label. Product Category The product category is determined by the standard according to the microcomputers configuration. The categorization of products complies with the regulations in the following table:

Product Type Category A Category B Category C Configuration Description Desktop microcomputer, AIO Portable Computer The desktop microcomputer and AIO whose configuration is out of the scope of Category B, C, and D The portable computer whose configuration is out of the scope of Category B and C CPU physical core number of 2, and system memory of not less than 2 GB A Discrete GPU CPU physical core number of over 2, with at least one of the following features:

1. System memory of not less than 2 GB The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with Frame Buffer Width not less than 128-bit. 50 Chapter 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-Ones Product Type Category D Configuration Description 2. A Discrete GPU CPU physical core number of not less than 4, with at least one of the following features:

1. 2. System memory of not less than 4 GB A Discrete GPU with Frame Buffer Width not less than 128-bit For more details on the specification, please refer to the standard GB28380-2012. China PC energy label 51 52 Chapter 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-Ones China restriction of hazard substances (ROHS) The Table of Hazardous Substances/Elements and their Content As required by Chinas Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Products Part Name Battery Cables Camera Chassis/Other Fan Flash memory card reader Floppy disk drive Hard disk drive Headphones Heat sink I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Projector Remote control Smart card/Java card reader Hazardous Substances Lead (Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X X X X X X X X O X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O China restriction of hazard substances (ROHS) 53 Part Name Solid-state drives Speakers, external Stylus Touch mat TV tuner USB flash memory drive USB hub Web camera Wireless receiver Wireless cards 3D Capture Stage/

Turntable Hazardous Substances Lead (Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O This form has been prepared in compliance with the provisions of SJ/T 11364. O: Indicates that the content of said hazardous substance in all of the homogenous materials in the component is within the limits required by GB/T 26572. X: Indicates that the content of said hazardous substance exceeds the limits required by GB/T 26572 in at least one homogenous material in the component. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

/

(Pb)

(Hg)

(Cd) X X X X X X O O O O O O O O O O O O

(Cr(VI)) O O O O O O

(PBB)

(PBDE) O O O O O O O O O O O O 54 Chapter 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-Ones I/O PCA

(LCD) CD/DVD/

/Java USB USB 3D /

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) X X X X X X X O X X X X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 X RoHS China restriction of hazard substances (ROHS) 55

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent chromium (CR

+6) Polybrominated biphenyls (PBB) Unit Cables

/ Chassis/Other

/

I/O PCAs

(LCD) AIOLiquid crystal display (LCD) panel

(for AIO only) Memory Motherboard, processor, heat sinks Power supply Storage Devices Polybrominated diphenyl ethers

(PBDE) 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption. http://www.hp.com/support 56 Chapter 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-Ones To access the latest user guides or manuals for your product, go to http://www.hp.com/support. Select Find your product, and then follow the on-screen instructions. India restriction of hazardous substances (RoHS) This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the "India E-waste Rule 2016." It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except where allowed pursuant to the exemptions set in Schedule 2 of the Rule. Information for European Union Commission Regulation 1275/2008 To locate product power consumption data, including when the product is in networked standby with all wired network ports connected and wireless devices connected, refer to section P14 Additional information of the product IT ECO Declaration at http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/

itecodesktop-pc.html. Where applicable, activate and deactivate a wireless network using the instructions included in the product user guide or the operating system. Information is also available at http://www.hp.com/support. IT ECO declarations Desktop PCs and Thin Clients http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?

jumpid=reg_R1002_USEN Workstations http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html Japan restriction of hazardous substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Mehiki zakon o uporabi trajnostne energije Ley para el Aprovechamiento Sustentable de la Energa de Mxico Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal (modo inactivo) y del India restriction of hazardous substances (RoHS) 57 modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). NOTE: Esta ley no es aplicable a los workstations. This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). NOTE: Workstations are not labeled because the law is not applicable to the workstation product category. Turkey EEE regulation Omejevanje uporabe nekaterih nevarnih snovi (RoHS) za Ukrajino The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment. 58 Chapter 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-Ones TCO Certified This section applies only to products bearing the TCO Certified logo. TCO Certified 59 TCO Certified Edge This section applies only to products bearing the TCO Certified Edge logo. 60 Chapter 6 Environmental notices for desktops, thin clients, personal workstations, and All-in-Ones Index Symbols/Numerics 41, 56 41, 56 A airline travel notice 8 altitude notice 25, 32 B battery 23, 27 battery notice 8, 44, 47 battery recycling 34, 47 Brazil notice 3, 18, 24, 29 C cable grounding notice 25 Canada modem statement 12, 15 Canada notices 3, 18 China environmental notices 36, 49 China PC energy label 36, 50 China restriction of hazardous substances notice 39, 53 D disposal notices battery 44, 47 battery, user replacement 8 equipment 34, 47 factory sealed battery 8 E electronic hardware and battery recycling 34, 47 ENERGY STAR certification 35, 48 environmental notices 34, 47 equipment disposal notice 34, 47 ergonomics notice 5, 20 European Union Commission Regulation 1275/2008 43, 57 F fan notice 28 Federal Communications Commission desktops, thin clients, and workstations notice 17 desktops, thin clients, workstations cables 17 desktops, thin clients, modem statements Canada 12, 15 Japan 12 New Zealand 12, 16 U.S. 9, 10, 14 modifications, desktops, thin clients, workstations modifications 17 workstations notebook computers cables 2 notebook computers modifications 2 notebook computers notice 2 G GS Notice 5, 20 H headset and earphone volume level notice 24, 28 I India restriction of hazardous substances notice 42, 57 J Japan modem statement 12 Japan notice 6, 20 Japan power cord notice 13, 21, 30 Japan restriction of hazardous substances notice 43, 57 K keyboard notice 24 L labels, regulatory 1 laser safety notice 9, 28 M Macrovision Corporation notice 13 maximum power levels 4, 19 Mexico Sustainable Energy Use Law 43 Mexico wireless notice 6, 21 modem notices 9, 14 Federal Communications Commission 17 modifications, notebook computers Federal Communications Commission 2 N New Zealand modem statement 12, 16 notices airline travel 8 battery 8, 23, 27, 44, 47 Brazil 3, 18, 24, 29 Canada 3, 18 China restriction of hazardous substances 39, 53 environmental 34, 47 equipment disposal 34, 47 ergonomics 5, 20 fan 28 headset and earphone volume level 24, 28 India restriction of hazardous substances 42, 57 Japan 6, 20 Japan power cord 13, 21, 30 Japan restriction of hazardous substances 43, 57 keyboard 24 laser safety 9, 28 Macrovision Corporation 13 Mexico 6, 21 modem 9, 14 perchlorate material 44, 49 power cords 13, 24 Singapore 7 South Korea 7, 21 Taiwan 7, 21 Index 61 Thailand WWAN wireless notice volume level notice, headset and earphone 24, 28 W wireless LAN devices 3, 18 7 travel 24 Ukraine restriction of hazardous substances 44 notices, desktops, thin clients, and workstations Federal Communications Commission 17 notices, notebook computers Federal Communications Commission 2 O obvestila omejevanje uporabe nekaterih nevarnih snovi za Ukrajino 58 obvestilo o omejevanju uporabe nekaterih nevarnih snovi za Ukrajino 58 P power cord notice 13, 24 R radio frequency bands 4, 19 recycling, electronic hardware and battery 34, 47 S Singapore wireless notice 7 South Korea notice 7, 21 T Taiwan notice 7, 21 TCO Certified Certification 45, 59 TCO Certified Edge Certification 46, 60 Thailand WWAN wireless notice 7 travel notice 24 tropical warning notice 25, 32 TV tuner, cable grounding notice 25 U U.S. modem statement 9, 10, 14 Ukraine restriction of hazardous substances notice 44 V voice support 13, 16 62 Index

Regulatory, Safety, and Environmental Notices User Guide Copyright 2015, 2016 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Java is a registered trademark of Oracle and/or its affiliates. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Third Edition: February 2016 First Edition: August 2015 Document Part Number: 836854-003 About This Guide This guide provides regulatory, safety and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, desktops, thin clients and personal workstations. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. iii iv About This Guide Table of contents 1 Regulatory notices for notebook computers .................................................................................................... 1 Accessing regulatory labels ................................................................................................................................... 1 Federal Communications Commission notice ....................................................................................................... 1 Modifications ....................................................................................................................................... 2 Cables .................................................................................................................................................. 2 Products with wireless LAN devices or HP Mobile Broadband Modules ............................................. 2 Brazil notice ........................................................................................................................................................... 3 Canada notices ....................................................................................................................................................... 3 European Union regulatory notices ....................................................................................................................... 3 Declaration of Conformity ................................................................................................................... 3 Products with radio functionality (EMF) ........................................................................... 4 Restrictions for products with radio functionality ........................................................... 4 European telephone network declaration (Modem/Fax) ................................................. 4 Ergonomics notice ............................................................................................................. 4 Germany (English text) ................................................................................... 4 Germany (Deutscher text) .............................................................................. 4 Australia and New Zealand notice ......................................................................................................................... 5 China WWAN notice ................................................................................................................................................ 5 Japan notice ........................................................................................................................................................... 5 Wireless LAN, Wireless WAN, and Bluetooth certification markings ................................................ 5 Mexico notice ......................................................................................................................................................... 5 Russia regulatory notices ...................................................................................................................................... 6

................................................................................................. 6

........................................................................................ 6

: ................................................................................................. 6

: ..................................................................................................... 6 Singapore wireless notice ...................................................................................................................................... 7 South Korea notices ............................................................................................................................................... 7 Thailand WWAN wireless notice ............................................................................................................................ 7 Taiwan NCC notices ................................................................................................................................................ 7 Wireless LAN 802.11a devices ............................................................................................................ 7 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices .............................................. 8 Airline travel notice ................................................................................................................................................ 8 User-replaceable battery notices .......................................................................................................................... 8 Factory-sealed battery notices ............................................................................................................................. 8 Laser compliance ................................................................................................................................................... 8 v Modem notices ....................................................................................................................................................... 9 Telecommunications device approvals ............................................................................................... 9 U.S. modem statements ...................................................................................................................... 9 U.S. modem declarations .................................................................................................................. 10 Canada modem statements .............................................................................................................. 12 Japan modem statements ................................................................................................................ 12 New Zealand modem statements ..................................................................................................... 12 Voice support .................................................................................................................. 13 Power cord notice ................................................................................................................................................ 13 Japan power cord notice ................................................................................................................... 13 DC plug of external HP power supply ................................................................................................ 13 Macrovision Corporation notice ........................................................................................................................... 13 2 Regulatory notices for desktops, thin clients and personal workstations ......................................................... 14 Modem notices ..................................................................................................................................................... 14 Telecommunications device approvals ............................................................................................. 14 U.S. modem statements .................................................................................................................... 14 Canadian modem statements ........................................................................................................... 15 Japanese modem statements ........................................................................................................... 15 New Zealand modem statements ..................................................................................................... 16 Voice support .................................................................................................................. 16 Electromagnetic compatibility notices ................................................................................................................ 16 Federal Communications Commission notice ................................................................................... 17 Modifications ................................................................................................................... 17 Cables .............................................................................................................................. 17 Products with wireless LAN devices ............................................................................... 17 Australia telecom statement ............................................................................................................ 18 Brazil notice ....................................................................................................................................... 19 Canadian notice ................................................................................................................................. 19 European Union regulatory notices .................................................................................................. 19 Declaration of Conformity .............................................................................................. 19 Products with radio functionality (EMF) ...................................................... 19 Restrictions for products with radio functionality ....................................... 20 European telephone network declaration (Modem/Fax) ............................ 20 Ergonomics notice ........................................................................................ 20 Japan notice ....................................................................................................................................... 20 Wireless LAN and Bluetooth certification markings ....................................................... 20 Mexico notice ..................................................................................................................................... 20 Russia regulatory notices .................................................................................................................. 21

............................................................................ 21

................................................................... 21 vi

: ............................................................................ 21

: ................................................................................ 21 South Korea notices .......................................................................................................................... 22 Taiwan NCC notices ............................................................................................................................ 22 Wireless LAN 802.11a devices ........................................................................................ 22 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices ......................... 22 3 Safety notices for notebook computers ......................................................................................................... 23 Heat-related safety warning notice .................................................................................................................... 23 Potential safety conditions notice ....................................................................................................................... 23 User-replaceable battery notices ........................................................................................................................ 23 Headset and earphone volume level notice ........................................................................................................ 23 Power cord notices .............................................................................................................................................. 24 Brazil notice ....................................................................................................................................... 24 Cleaning the keyboard ......................................................................................................................................... 24 Travel notice ........................................................................................................................................................ 24 China safety notices ............................................................................................................................................. 24 China: Altitude notice ........................................................................................................................ 24 China: Tropical warning notice .......................................................................................................... 24 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................................... 25 Taiwan BSMI notice .............................................................................................................................................. 25 4 Safety notices for desktops, thin clients and personal workstations ............................................................... 26 Important safety information ............................................................................................................................. 26 Installation conditions ......................................................................................................................................... 26 Battery replacement notice ................................................................................................................................. 27 Headset and earphone volume level notice ........................................................................................................ 27 Laser safety ......................................................................................................................................................... 27 Power supply and power cord set requirements ................................................................................................ 28 Power supply class I grounding requirements .................................................................................. 28 Brazil notice .................................................................................................................... 28 Denmark .......................................................................................................................... 28 Finland ............................................................................................................................. 28 Norway ............................................................................................................................ 28 Sweden ............................................................................................................................ 28 Power supply requirements .............................................................................................................. 28 For use in Norway ........................................................................................................... 28 Power cord set requirements ............................................................................................................ 29 Japan power cord requirements ....................................................................................................... 29 Pinch hazard ........................................................................................................................................................ 29 TV antenna connectors protection ...................................................................................................................... 29 vii External television antenna grounding ............................................................................................. 29 Lightning protection .......................................................................................................................... 30 Note to CATV system installer ........................................................................................................... 30 China safety notices ............................................................................................................................................. 31 China: Altitude notice ........................................................................................................................ 31 China: Tropical warning notice .......................................................................................................... 31 Germany acoustics notice .................................................................................................................................... 32 Taiwan BSMI notice .............................................................................................................................................. 32 5 Environmental notices for notebook computers ............................................................................................. 33 Electronic hardware, packaging and battery recycling ....................................................................................... 33 Disposal of waste equipment by users ............................................................................................................... 33 Brazil alkaline battery disposal ........................................................................................................................... 33 Brazil hardware recycling information ................................................................................................................ 33 ENERGY STAR Certification (select models only) ............................................................................................... 34 Chemical substances ........................................................................................................................................... 35 China environmental notices ............................................................................................................................... 35 China PC energy label .......................................................................................................................................... 35 China restriction of hazardous substances (RoHS) ............................................................................................. 38 The Table of Hazardous Substances/Elements and their Content ................................................... 38 India restriction of hazardous substances (RoHS) .............................................................................................. 40 Information for European Union Commission Regulation 1275/2008 .............................................................. 40 IT ECO declarations .............................................................................................................................................. 41 Japan restriction of hazardous substances (RoHS) ............................................................................................ 41 Mexico Sustainable Energy Use Law ................................................................................................................... 41 Turkey EEE regulation .......................................................................................................................................... 41 Ukraine restriction of hazardous substances (RoHS) ......................................................................................... 41 Perchlorate materialspecial handling may apply ........................................................................................... 41 6 Environmental notices for desktops, thin clients and personal workstations ................................................... 42 Electronic hardware, packaging and battery recycling ....................................................................................... 42 Disposal of waste equipment by users ............................................................................................................... 42 Brazil alkaline battery disposal ........................................................................................................................... 42 Brazil hardware recycling information ................................................................................................................ 42 ENERGY STAR Certification (select models only) ............................................................................................... 43 Chemical substances ........................................................................................................................................... 44 Mercury statement .............................................................................................................................................. 44 Perchlorate materialspecial handling may apply ............................................................................................. 44 China environmental notices ............................................................................................................................... 44 China PC energy label .......................................................................................................................................... 45 China restriction of hazard substances (ROHS) ................................................................................................... 48 viii The Table of Hazardous Substances/Elements and their Content ................................................... 48 India restriction of hazardous substances (RoHS) .............................................................................................. 51 Information for European Union Commission Regulation 1275/2008 .............................................................. 51 IT ECO declarations .............................................................................................................................................. 51 Japan restriction of hazardous substances (RoHS) ............................................................................................ 51 Mehiki zakon o uporabi trajnostne energije ...................................................................................................... 51 Turkey EEE regulation .......................................................................................................................................... 52 Omejevanje uporabe nekaterih nevarnih snovi (RoHS) za Ukrajino ................................................................... 52 TCO Certified Edge Certification ........................................................................................................................... 52 Index ............................................................................................................................................................. 54 ix x 1 Regulatory notices for notebook computers This chapter provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Accessing regulatory labels Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be physically located on the bottom of the computer, inside the battery bay (select models only), under the removable service door (select models only), on the back of the display, or on the wireless or modem module. Some products may also provide electronic regulatory labels (e-labels) for radio modules in your computer. Electronic labels can be accessed through the system BIOS. NOTE: Electronic labels are not available on all products. NOTE: Devices not for sale or use in the United States may not contain a FCC ID. To view electronic regulatory labels:

1. 2. 3. 4. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter Computer Setup. Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press enter. To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and then press OK. NOTE: The list of available electronic label items varies depending on the computer model and installed devices. 5. To exit Computer Setup menus without saving your changes:

Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Accessing regulatory labels 1 Reorient or relocate the receiving antenna. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Increase the separation between the equipment and receiver. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, write to:

HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 or call HP at 650-857-1501. To identify this product, refer to the part, series, or model number found on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm

(12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. 2 Chapter 1 Regulatory notices for notebook computers Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Ao operar o dispositivo a uma distncia muito prxima do seu corpo, utilize um acessrio de armazenamento no metlico para posicionar o dispositivo a uma distncia mnima de 1,5 cm do corpo. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm

(12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-

channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. European Union regulatory notices Declaration of Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

R&TTE Directive 1999/5/EC (replaced in 2017 by RED 2014/53/EU) ; Low Voltage Directive 2006/95/EC

(replaced in April 2016 by 2014/35/EU); EMC Directive 2004/108/EC (replaced in April 2016 by 2014/30/EU);

Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU Compliance with these directives is assessed using applicable European Harmonised Standards. Brazil notice 3 The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/certificates

(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany. Products with radio functionality (EMF) This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product. Restrictions for products with radio functionality When operating in the frequency band 5150 to 5350 MHz, this product is restricted to indoor use only. European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the applicable Directive 1999/5/EC (Annex II) and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. Ergonomics notice Germany (English text) When a mobile computer is used at the office workstation for display work tasks where the Visual Display Unit

(VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000 (voluntary GS certification) Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements. Without external keyboards, they are suitable only for short-time use of VDU tasks. During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur, which result in reduced readability. Germany (Deutscher text) Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG

(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. Ref: EK1-ITB 2000 (freiwillige GS Zertifizierung) Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Bei mobiler Nutzung mit ungnstigen Lichtverhltnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschrnkungen der Lesbarkeit der dargestellten Zeichen kommen. 4 Chapter 1 Regulatory notices for notebook computers Australia and New Zealand notice This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. China WWAN notice Japan notice Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. Mexico notice Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. The regulatory model number for this product is on the regulatory label. If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. The regulatory model number for this product is on the regulatory label. Australia and New Zealand notice 5 Russia regulatory notices HP Inc.

: 1501 Page Mill Road, Palo Alto, California 94304, U.S. 10- ,

. 4-, 5- 6- . 4- , 3

, 2013 . 5-

6- , 12 12- . HP Inc.

: 1501 Page Mill Road, Palo Alto, California 94304, U.S. 10

. 4-, 5- 6-

. 4- , 3 2013

. 5- 6-

, , 12 12- .

:

: "- ..", , 125171, . , , 16, .3, /: +7 495 797 35 00

: " ..", , 050040, .

, , -, 77/7,

/:

+ 7 727 355 35 52

:

: - A.O., , 125171, ,

, 16A 3, /: +7 495 797 35 00

: " .." ,

, 050040, ., , -

, 77/7, /: +7 727 355 35 52 6 Chapter 1 Regulatory notices for notebook computers Singapore wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. South Korea notices Thailand WWAN wireless notice This telecom equipment has complied with NTC regulations. Taiwan NCC notices Wireless LAN 802.11a devices Singapore wireless notice 7 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP Web site at http://www.hp.com/

recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. Factory-sealed battery notices The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Do not try to open the module enclosure. There are no user-serviceable components inside. Allow only authorized service providers to repair the unit. 8 Chapter 1 Regulatory notices for notebook computers This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007. Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS. Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Modem notices 9 Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-

distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

10 Chapter 1 Regulatory notices for notebook computers Modem notices 11 Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). 12 Chapter 1 Regulatory notices for notebook computers Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/

18AWG, and the length of the cord must be between 1.0 m (3.2 ft) and 2 m (6.56 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japan power cord notice DC plug of external HP power supply Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Power cord notice 13 2 Regulatory notices for desktops, thin clients and personal workstations Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (Ethernet network) jack. SAVE THESE INSTRUCTIONS. Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. 14 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-

distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. Canadian modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below:

Modem notices 15 New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Electromagnetic compatibility notices This guide provides country- and region-specific nonwireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous 16 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Increase the separation between the equipment and the receiver. Reorient or relocate the receiving antenna. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, write to:

HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 or call HP at 650-857-1501. To identify this product, refer to the part, series, or model number found on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations. Products with wireless LAN devices This product may be equipped with a wireless LAN device. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Electromagnetic compatibility notices 17 WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the wireless antennae, refer to the documentation included with the computer. Australia telecom statement The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of AS/CA S008. WARNING! Modems without integral RJ11 connector that are shipped with this computer should not be installed in any other device. This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. 18 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. CAUTION: A alimentao de energia predefinida para 220/230Vv. Se voc possuir tomada eltrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Canadian notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, this device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation: To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the wireless antennae, refer to the documentation included with the computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-

channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antenna for this device is not replaceable. Any attempt at user modification may damage your computer. European Union regulatory notices Declaration of Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

R&TTE Directive 1999/5/EC (replaced in 2017 by RED 2014/53/EU) ; Low Voltage Directive 2006/95/EC

(replaced in April 2016 by 2014/35/EU); EMC Directive 2004/108/EC (replaced in April 2016 by 2014/30/EU);

Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/certificates

(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany. Products with radio functionality (EMF) This product may incorporate a radio transmitting and receiving device. For desktop computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Electromagnetic compatibility notices 19 Restrictions for products with radio functionality When operating in the frequency band 5150 to 5350 MHz, this product is restricted to indoor use only. European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the applicable Directive 1999/5/EC (Annex II) and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. This equipment has been designed to work with analogue DTMF Networks. This equipment may have internetworking difficulties in PSTN networks that only support Pulse Dialing. Please consult with your network operator for further assistance. Ergonomics notice Germany (English text) A computer system comprising HP brand products meets the applicable ergonomic requirements if all affected constituent products bear the "GS" approval mark, for example Business Desktop PC, keyboard, PC-

mouse and monitor. Germany (Deutscher text) Ein aus HP Produkten bestehendes Computersystem erfllt die anwendbaren ergonomischen Anforderungen, wenn alle verwendeten Komponenten das GS Zeichen tragen, wie z. B. Business Desktop PC, Tastatur, PC-

Maus und Bildschirm. Japan notice Wireless LAN and Bluetooth certification markings If this device contains radio equipment, it is certified radio equipment. Mexico notice Declaracin para Mxico 20 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. Russia regulatory notices HP Inc.

: 1501 Page Mill Road, Palo Alto, California 94304, U.S. 10- ,

. 4-, 5- 6- . 4- , 3

, 2013 . 5-

6- , 12 12- . HP Inc.

: 1501 Page Mill Road, Palo Alto, California 94304, U.S. 10

. 4-, 5- 6-

. 4- , 3 2013

. 5- 6-

, , 12 12- .

:

: "- ..", , 125171, . , , 16, .3, /: +7 495 797 35 00

: " ..", , 050040, .

, , -, 77/7,

/:

+ 7 727 355 35 52

:

: - A.O., , 125171, ,

, 16A 3, /: +7 495 797 35 00

: " .." ,

, 050040, ., , -

, Electromagnetic compatibility notices 21 77/7, /: +7 727 355 35 52 South Korea notices Taiwan NCC notices Wireless LAN 802.11a devices Wireless LAN 802.11 devices/Bluetooth devices/Short range devices 22 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations 3 Safety notices for notebook computers WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC/EN 60950). Potential safety conditions notice If you notice any of the following conditions (or if you have other safety concerns), do not use the computer:

crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance. User-replaceable battery notices WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. WARNING! Keep the battery away from children. WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Headset and earphone volume level notice WARNING!

To prevent possible hearing damage, do not listen at high volume levels for long periods. Heat-related safety warning notice 23 Power cord notices Plug the power cord into an AC outlet that is easily accessible at all times. WARNING! To reduce the risk of electric shock or damage to the equipment:

Disconnect power from the computer by unplugging the power cord from the AC outlet. If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. Brazil notice Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia eltrica que possua aterramento (trs pinos), conforme a norma nbr abnt 5410,visando a segurana dos usurios contra choques eltricos. Cleaning the keyboard WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. China safety notices China: Altitude notice Altitude warning for products not certified for use in >5000 m Icon Description China: Tropical warning notice Tropical warning for products not certified for use in tropical regions. 24 Chapter 3 Safety notices for notebook computers Icon Description Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system. Taiwan BSMI notice Norway and Sweden: Cable grounding notice for products with a TV tuner 25 4 Safety notices for desktops, thin clients and personal workstations Important safety information WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. Plug the power cord into an AC outlet that is easily accessible at all times. To reduce the risk of electric shock or damage to the equipment:

Disconnect power from the computer by unplugging the power cord from the AC outlet. If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it. Install the computer near an AC outlet. The AC power cord is your computers main AC disconnecting device and must be easily accessible at all times. For your safety, the power cord provided with your computer has a grounded plug. Always use the power cord with a properly grounded wall outlet, to avoid the risk of electrical shock. To reduce the possibility of an electric shock from the telephone network, plug your computer into the AC outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your computer from the AC power outlet. Always disconnect the modem cord from the telephone system before installing or removing your computer cover. Do not operate the computer with the cover removed. For your safety, always unplug the computer from its power source and from any telecommunications systems (such as telephone lines), networks, or modems before performing any service procedures. Failure to do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power supply and modem of this product. If your computer is provided with a voltage select switch for use in a 115 or 230 V power system, CAUTION:

the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/

region where it was initially sold. Changing the voltage select switch to the incorrect position can damage your computer and void any implied warranty. This product has not been evaluated for connection to an IT power system (an AC distribution system with no direct connection to earth, according to IEC/EN 60950). Installation conditions See installation instructions before connecting this equipment to the input supply. 26 Chapter 4 Safety notices for desktops, thin clients and personal workstations WARNING! The equipment must be provided with a proper AC protective earth (PE) ground connection. Energized and moving parts may be inside the computer. Disconnect power to the equipment before removing the enclosure. Replace and secure the enclosure before re-energizing the equipment. Battery replacement notice Do not attempt to recharge the battery. WARNING! The product may contain an internal lithium manganese dioxide, vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire and burns if the battery pack is not handled properly. To reduce the risk of personal injury:

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. Do not expose to temperatures higher than 60 C (140 F). Replace only with the HP spare designated for this product. For information about removing a battery, refer to your computer documentation. Icon Description Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to HP, an authorized HP partner, or their agents. Icon Description The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 of the Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions. Contact a qualified Taiwanese recycler for proper battery disposal. Headset and earphone volume level notice WARNING!

To prevent possible hearing damage, do not listen at high volume levels for long periods. Laser safety For products equipped with optical drives or fiber optic transceivers. This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the standard IEC/EN 60825-1 and comply with its requirements. Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Battery replacement notice 27 WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser products installation guide may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. Allow only HP Authorized Service technicians to repair the unit. Power supply and power cord set requirements Power supply class I grounding requirements For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the system power cord into an AC outlet that provides a ground connection. Substitute cords may not provide adequate fault protection. Only use the power cord supplied with this product or a Hewlett-Packard authorized replacement. Brazil notice Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia eltrica que possua aterramento (trs pinos), conforme a norma nbr abnt 5410,visando a segurana dos usurios contra choques eltricos. Denmark Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Finland Norway Sweden Laite on liitettv suojakoskettimilla varustettuun pistorasiaan. Apparatet m tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Power supply requirements The power supplies on some products have external power switches. The voltage select switch feature on the product permits it to operate from any line voltage between 100-127 or 200-240 volts AC. Power supplies on those products that do not have external power switches are equipped with internal circuits that sense the incoming voltage and automatically switch to the proper voltage. For safety reasons, use only the AC adapter provided with the unit or an authorized replacement adapter from Hewlett-Packard. Replacement part numbers may be found at http://www.hp.com/cgi-bin/hpsupport/

index.pl. For use in Norway This product is also designed for an IT power system with phase-to-phase voltage 230V. 28 Chapter 4 Safety notices for desktops, thin clients and personal workstations Power cord set requirements The power cord set received with the product meets the requirements for use in the country where the equipment was originally purchased. Use only the power cord provided with the unit or an authorized replacement power cord from Hewlett-Packard or an approved HP source. Replacement part numbers may be found at http://www.hp.com/cgi-bin/hpsupport/index.pl. Power cord sets for use in other countries must meet the requirements of the country where you use the product. For more information on power cord set requirements, contact your authorized HP dealer, reseller, or service provider. WARNING! Do not use power cords from other products. Mismatched power cords may result in a shock and fire hazard. The requirements listed below are applicable to all countries:

1. 2. The power cord must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be installed. The length of the power cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). For a power cord 2.0 m

(6.56 feet) or less, the diameter of the wire must be a minimum of 0.75 mm2 or 18AWG. If the power cord is longer than 2.0 m (6.56 feet), the diameter of the wire must be a minimum of 1.0 mm2 or 16AWG. The power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. WARNING! Do not operate this product with a damaged power cord set. If the power cord set is damaged in any manner, replace it immediately. Damaged cords may result in user exposure to hazards. Japan power cord requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. Pinch hazard WARNING! Observe pinch hazard areas. Keep fingers away from closing parts. TV antenna connectors protection External television antenna grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is electrically grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper electrical grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-

discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Pinch hazard 29 Lightning protection For added protection of any product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product from lightning and power line surges. Table 4-1 Antenna Grounding Reference Grounding Component 1 2 3 4 5 6 7 Electric Service Equipment Power Service Grounding Electrode System (NEC Art 250, Part III) Ground Clamps Grounding Conductors (NEC Section 810.21) Antenna Discharge Unit (NEC Section 810.20) Ground Clamp Antenna Lead-in Wire Note to CATV system installer This reminder is provided to call the CATV systems installers attention to section 820.93 of the National Electric Code, which provides guidelines for proper grounding and in particular, specify that the Coaxial cable shield shall be connected to grounding system of the building, as close to the point of cable entry as practical. 30 Chapter 4 Safety notices for desktops, thin clients and personal workstations China safety notices China: Altitude notice Altitude warning for products not certified for use in >5000 m Icon Description China: Tropical warning notice Tropical warning for products not certified for use in tropical regions. Icon Description China safety notices 31 Germany acoustics notice Sound pressure level (LpA) is far below 70dB(A) (operator position, normal operation, according to ISO 7779) Product noise emission data can be found in the product related IT ECO Declarations at Internet address:

http://www.hp.com/go/ted Schalldruckpegel (LpA) ist weit unterhalb 70 dB(A) (Benutzerposition, normaler Betrieb, nach ISO 7779) Die Schallemissionswerte der Produkte knnen in den produktbezogenen IT ECO Declarations auf folgender Internet Adresse gefunden werden: http://www.hp.com/go/ted Taiwan BSMI notice 32 Chapter 4 Safety notices for desktops, thin clients and personal workstations 5 Environmental notices for notebook computers This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware, packaging and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle. For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/. Disposal of waste equipment by users This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle. Brazil alkaline battery disposal Icon Description Este produto eletroeletrnico e seus componentes no devem ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Brazil hardware recycling information Icon Description Este produto eletroeletrnico e seus componentes no devem ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Electronic hardware, packaging and battery recycling 33 Icon Description No descarte o produto eletrnico em lixo comum Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar ENERGY STAR Certification (select models only) ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or requirements set by the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, Hewlett-Packard Company has followed the U.S. EPAs enhanced product certification process to ensure that products marked with the ENERGY STAR logo are ENERGY STAR certified per the applicable ENERGY STAR guidelines. The following logo appears on all ENERGY STAR-certified computers:

A key ENERGY STAR requirement for computer products is power management features that significantly reduce energy consumption when the product is not in use. Power management allows a computer to automatically enter a low power sleep mode, or other low power mode, after a defined period of inactivity. The power management features have been preset as follows when the computer is operating on AC power:

Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode Notebooks, Mobile Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Product will exit sleep mode when the power/sleep button is pressed. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. Tablets/Slates Less than or equal to 1 minute Not applicable Not applicable For computers that support an always-on, always-connected use profile where internet access is available

(such as tablets and slates), alternative low power modes - such as Short or Long Idle modes (as defined in the ENERGY STAR Computer Program Requirements) are provided that consume very little power (</= 10 Watts) and when applicable, maximize product battery life. These alternative low power modes are dynamic, with the display sleep mode activated within 1 minute of user inactivity. The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/

powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. 34 Chapter 5 Environmental notices for notebook computers ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. China environmental notices China PC energy label In accordance with The Regulation of the Implementation on China Energy Label for Microcomputers

(CEL-30), this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012. 1. Energy Efficiency Grades The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card. For products of any grade, the TEC should not exceed the value specified in the following table:

Product Type Grade 1 Grade 2 Grade 3 TEC (kilowatt hour) Desktop microcomputer, AIO Category A 98.0+Efa 148.0+Efa 198.0+Efa Category B Category C Category D 125.0+Efa 159.0+Efa 184.0+Efa 175.0+Efa 225.0+Efa 209.0+Efa 259.0+Efa 234.0+Efa 284.0+Efa Chemical substances 35 Product Type Portable Computer TEC (kilowatt hour) Category A Category B Category C 20.0+Efa 26.0+Efa 54.5+Efa 35.0+Efa 45.0+Efa 75.0+Efa 45.0+Efa 65.0+Efa 123.5+Efa NOTE: Efa is the sum of power factor of product additional functions. 2. Typical Energy Consumption The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to CEL-30. Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label. 3. Product Category The product category is determined by the standard according to the microcomputers configuration. The categorization of products complies with the regulations in the following table:

Product Type Category A Category B Category C Configuration Description Desktop microcomputer, AIO Portable Computer The desktop microcomputer and AIO whose configuration is out of the scope of Category B, C, and D The portable computer whose configuration is out of the scope of Category B and C CPU physical core number of 2, and system memory of not less than 2GB A Discrete GPU CPU physical core number of over 2, with at least one of the following features:

1. 2. System memory of not less than 2 GB A Discrete GPU The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with Frame Buffer Width not less than 128-bit. Category D CPU physical core number of not less than 4, with at least one of the following features:

1. 2. System memory of not less than 4 GB A Discrete GPU with Frame Buffer Width not less than 128-bit For more details on the specification, please refer to the standard GB28380-2012. 36 Chapter 5 Environmental notices for notebook computers China PC energy label 37 China restriction of hazardous substances (RoHS) The Table of Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Hazardous Substances Part Name Lead (Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Battery Cables Camera Chassis/Other Flash memory card reader Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Remote control Smart card/Java card reader Speakers, external TV tuner USB flash memory drive USB hub X X X X X X X X X X X O X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 38 Chapter 5 Environmental notices for notebook computers Hazardous Substances Part Name Web camera Wireless receiver Wireless cards Lead (Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X O O O O O O O O O O O O O O O This form has been prepared in compliance with the provisions of SJ/T 11364. O: Indicates that the content of said hazardous substance in all of the homogenous materials in the component is within the limits required by GB/T 26572. X: Indicates that the content of said hazardous substance exceeds the limits required by GB/T 26572 in at least one homogenous material in the component. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

/

I/O PCA

(LCD) CD/DVD/

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) X X X X X X X X X X X O X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O China restriction of hazardous substances (RoHS) 39

/Java USB USB

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 X RoHS India restriction of hazardous substances (RoHS) This product complies with the India E-waste (Management and Handling) Rule 2011 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. Information for European Union Commission Regulation 1275/2008 To locate product power consumption data, including when the product is in networked standby with all wired network ports connected and wireless devices connected, refer to section P14 Additional information of the product IT ECO Declaration at http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/

itecodesktop-pc.html. Where applicable, activate and deactivate a wireless network using the instructions included in the product user guide or the operating system. Information is also available at http://www.hp.com/support. 40 Chapter 5 Environmental notices for notebook computers IT ECO declarations For notebook PCs, go to http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/

iteconotebook-o.html. Japan restriction of hazardous substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Mexico Sustainable Energy Use Law This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). Turkey EEE regulation Ukraine restriction of hazardous substances (RoHS) The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment. Perchlorate materialspecial handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. IT ECO declarations 41 6 Environmental notices for desktops, thin clients and personal workstations This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware, packaging and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle. For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/. Disposal of waste equipment by users Icon Description This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle. Brazil alkaline battery disposal Icon Description Este produto eletroeletrnico e seus componentes no devem ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Brazil hardware recycling information Icon Description Este produto eletroeletrnico e seus componentes no devem ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar 42 Chapter 6 Environmental notices for desktops, thin clients and personal workstations Icon Description No descarte o produto eletrnico em lixo comum ENERGY STAR Certification (select models only) ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or requirements set by the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, Hewlett-Packard Company has followed the U.S. EPAs enhanced product certification process to ensure that products marked with the ENERGY STAR logo are ENERGY STAR certified per the applicable ENERGY STAR guidelines. The following logo appears on all ENERGY STAR-certified computers:

A key ENERGY STAR requirement for computer products is power management features that significantly reduce energy consumption when the product is not in use. Power management allows a computer to automatically enter a low power sleep mode, or other low power mode, after a defined period of inactivity. The power management features have been preset as follows when the computer is operating on AC power:

Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode Desktops, Integrated Desktops, Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Thin clients Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes when sleep mode is supported by the operating system (varies by model) Product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. When sleep mode is supported by operating system product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/

powermanagement. ENERGY STAR Certification (select models only) 43 Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No. 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. Mercury statement This statement applies to All-in-One computers with built-in display panels that do not use LED backlighting. This HP product may contain the following material that might require special handling at end-of-life:

Mercury in the fluorescent lamp in the display LCD Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA)

(http://www.eiae.org). Perchlorate materialspecial handling may apply The computers real-time clock battery may contain perchlorate and may require special handling when recycled or disposed of in California. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. China environmental notices 44 Chapter 6 Environmental notices for desktops, thin clients and personal workstations China PC energy label In accordance with The Regulation of the Implementation on China Energy Label for Microcomputers

(CEL-30), this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012. 1. Energy Efficiency Grades The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card. For products of any grade, the TEC should not exceed the value specified in the following table:

Product Type Grade 1 Grade 2 Grade 3 TEC (kilowatt hour) Desktop microcomputer, AIO Category A 98.0+Efa 148.0+Efa 198.0+Efa Portable Computer Category B Category C Category D Category A Category B Category C 125.0+Efa 159.0+Efa 184.0+Efa 20.0+Efa 26.0+Efa 54.5+Efa 175.0+Efa 225.0+Efa 209.0+Efa 259.0+Efa 234.0+Efa 284.0+Efa 35.0+Efa 45.0+Efa 75.0+Efa 45.0+Efa 65.0+Efa 123.5+Efa NOTE: Efa is the sum of power factor of product additional functions. 2. Typical Energy Consumption The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to CEL-30. Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label. 3. Product Category The product category is determined by the standard according to the microcomputers configuration. The categorization of products complies with the regulations in the following table:

Product Type Category A Category B Category C Configuration Description Desktop microcomputer, AIO Portable Computer The desktop microcomputer and AIO whose configuration is out of the scope of Category B, C, and D The portable computer whose configuration is out of the scope of Category B and C CPU physical core number of 2, and system memory of not less than 2GB A Discrete GPU CPU physical core number of over 2, with at least one of the following features:

1. System memory of not less than 2 GB The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with Frame Buffer Width not less than 128-bit. China PC energy label 45 Product Type Category D Configuration Description 2. A Discrete GPU CPU physical core number of not less than 4, with at least one of the following features:

1. 2. System memory of not less than 4 GB A Discrete GPU with Frame Buffer Width not less than 128-bit For more details on the specification, please refer to the standard GB28380-2012. 46 Chapter 6 Environmental notices for desktops, thin clients and personal workstations China PC energy label 47 China restriction of hazard substances (ROHS) The Table of Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Hazardous Substances Part Name Lead (Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Battery Cables Camera Chassis/Other Flash memory card reader Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Projector Remote control Smart card/Java card reader Speakers, external Stylus Touch mat X X X X X X X X X X X O X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 48 Chapter 6 Environmental notices for desktops, thin clients and personal workstations Part Name TV tuner USB flash memory drive USB hub Web camera Wireless receiver Wireless cards 3D Capture Stage/

Turntable Hazardous Substances Lead (Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O This form has been prepared in compliance with the provisions of SJ/T 11364. O: Indicates that the content of said hazardous substance in all of the homogenous materials in the component is within the limits required by GB/T 26572. X: Indicates that the content of said hazardous substance exceeds the limits required by GB/T 26572 in at least one homogenous material in the component. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

/

I/O PCA

(LCD)

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O China restriction of hazard substances (ROHS) 49

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) CD/DVD/

Projector

/Java Stylus Touch mat USB USB 3D Capture Stage/

Turntable O X X X X X X X X X X X X X X X X X X O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 X RoHS O O O O O O O O O O O O O O O O O O O O O 50 Chapter 6 Environmental notices for desktops, thin clients and personal workstations India restriction of hazardous substances (RoHS) This product complies with the India E-waste (Management and Handling) Rule 2011 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. Information for European Union Commission Regulation 1275/2008 To locate product power consumption data, including when the product is in networked standby with all wired network ports connected and wireless devices connected, refer to section P14 Additional information of the product IT ECO Declaration at http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/

itecodesktop-pc.html. Where applicable, activate and deactivate a wireless network using the instructions included in the product user guide or the operating system. Information is also available at http://www.hp.com/support. IT ECO declarations Desktop PCs and Thin Clients http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?

jumpid=reg_R1002_USEN Workstations http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html Japan restriction of hazardous substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Mehiki zakon o uporabi trajnostne energije Ley para el Aprovechamiento Sustentable de la Energa de Mxico Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal (modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de India restriction of hazardous substances (RoHS) 51 energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). NOTE: Esta ley no es aplicable a los workstations. This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). NOTE: Workstations are not labeled because the law is not applicable to the workstation product category. Turkey EEE regulation Omejevanje uporabe nekaterih nevarnih snovi (RoHS) za Ukrajino The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment. TCO Certified Edge Certification This section applies only to products bearing the TCO Certified Edge logo. 52 Chapter 6 Environmental notices for desktops, thin clients and personal workstations TCO Certified Edge Certification 53 Index A airline travel notice 8 altitude notice 24, 31 B battery user replacement 23 battery notice 8, 41, 42 battery recycling 33, 42 Brazil notice 3, 19, 24, 28 C cable grounding notice 25 Canada modem statement 12, 15 Canada notices 3, 19 China environmental notices 35, 44 China PC energy label 35, 45 China restriction of hazardous substances notice 38, 48 D disposal notices battery 41, 42 battery, user replacement 8 equipment 33, 42 factory sealed battery 8 E electronic hardware and battery recycling 33, 42 ENERGY STAR certification 34, 43 environmental notices 33, 42 equipment disposal notice 33, 42 ergonomics notice 4, 20 European Union Commission Regulation 1275/2008 40, 51 European Union notices 3, 19 F Federal Communications Commission desktops, thin clients and workstations notice 17 desktops, thin clients, workstations cables 17 54 Index desktops, thin clients, modifications, desktops, thin clients, workstations modifications 17 workstations notebook computers cables 2 notebook computers Federal Communications Commission 17 modifications 2 modifications, notebook computers notebook computers notice 1 Federal Communications G GS Notice 4, 20 Commission 2 N New Zealand modem statement 12, H headset and earphone volume level 16 notices notice 23, 27 I India restriction of hazardous substances notice 40, 51 J Japan modem statement 12 Japan notice 5, 20 Japan power cord notice 13, 29 Japan restriction of hazardous substances notice 41, 51 K keyboard notice 24 L labels, regulatory 1 laser safety notice 9, 27 M Macrovision Corporation notice 13 Mexico Sustainable Energy Use Law 41 Mexico wireless notice 5, 20 modem notices 9, 14 modem statements Canada 12, 15 Japan 12 New Zealand 12, 16 U.S. 9, 10, 14 airline travel 8 battery 8, 41, 42 battery, user replacement 23 Brazil 3, 19, 24, 28 Canada 3, 19 China restriction of hazardous substances 38, 48 environmental 33, 42 equipment disposal 33, 42 ergonomics 4, 20 European Union 3, 19 headset and earphone volume level 23, 27 India restriction of hazardous substances 40, 51 Japan 5, 20 Japan power cord 13, 29 Japan restriction of hazardous substances 41, 51 keyboard 24 laser safety 9, 27 Macrovision Corporation 13 Mexico 5, 20 modem 9, 14 perchlorate material 41, 44 power cords 13, 24 Singapore 7 South Korea 7, 22 Taiwan 7, 22 Thailand WWAN wireless notice 7 travel 24 Ukraine restriction of hazardous substances 41 notices, desktops, thin clients and workstations Federal Communications Commission 17 notices, notebook computers Federal Communications Commission 1 O obvestila omejevanje uporabe nekaterih nevarnih snovi za Ukrajino 52 obvestilo o omejevanju uporabe nekaterih nevarnih snovi za Ukrajino 52 P power cord notice 13, 24 R recycling, electronic hardware and battery 33, 42 S Singapore wireless notice 7 South Korea notice 7, 22 T Taiwan notice 7, 22 TCO Certified Edge Certification 52 Thailand WWAN wireless notice 7 travel notice 24 tropical warning notice 24, 31 TV tuner, cable grounding notice 25 U U.S. modem statement 9, 10, 14 Ukraine restriction of hazardous substances notice 41 V voice support 13, 16 volume level notice, headset and earphone 23, 27 W wireless LAN devices 2, 18, 19 Index 55

User Guide Copyright 2016 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, and Pentium are trademarks of Intel Corporation in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: June 2016 Document Part Number: 902007-001 Product notice Software terms By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. This guide describes features that are common to most products. Some features may not be available on your computer. Not all features are available in all editions or versions of Windows. Systems may require upgraded and/or separately purchased hardware, drivers, software or BIOS update to take full advantage of Windows functionality. Windows 10 is automatically updated, which is always enabled. ISP fees may apply and additional requirements may apply over time for updates. Go to http://www.microsoft.com for details. To access the latest user guides or manuals for your product, go to http://www.hp.com/

support, and select your country. Select Find your product, and then follow the on-screen instructions. Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950-1). iii iv Safety warning notice Processor configuration setting (select products only) IMPORTANT: Select products are configured with an Intel Pentium N35xx/N37xx series or a Celeron N28xx/N29xx/N30xx/N31xx series processor and a Windows operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. v vi Processor configuration setting (select products only) Table of contents 1 Starting right ................................................................................................................................................ 1 Visit the HP Apps Store .......................................................................................................................................... 1 Best practices ......................................................................................................................................................... 1 More HP resources ................................................................................................................................................. 2 2 Getting to know your computer ...................................................................................................................... 4 Locating hardware ................................................................................................................................................. 4 Locating software .................................................................................................................................................. 4 Right side ............................................................................................................................................................... 5 Left side ................................................................................................................................................................. 6 Display .................................................................................................................................................................... 7 Top .......................................................................................................................................................................... 9 TouchPad ............................................................................................................................................. 9 Lights ................................................................................................................................................. 10 Keys ................................................................................................................................................... 11 Using the action keys ........................................................................................................................ 11 Front ..................................................................................................................................................................... 13 Labels ................................................................................................................................................................... 13 3 Connecting to a network .............................................................................................................................. 15 Connecting to a wireless network ....................................................................................................................... 15 Using the wireless controls ............................................................................................................... 15 Airplane mode key .......................................................................................................... 15 Operating system controls ............................................................................................. 15 Connecting to a WLAN ....................................................................................................................... 16 Using HP Mobile Broadband (select products only) .......................................................................... 16 Using GPS (select products only) ...................................................................................................... 17 Using Bluetooth wireless devices (select products only) ................................................................. 17 Connecting Bluetooth devices ........................................................................................ 17 Connecting to a wired networkLAN (select products only) ............................................................................. 17 Sharing data and drives and accessing software ................................................................................................ 18 4 Enjoying entertainment features .................................................................................................................. 19 Using the camera ................................................................................................................................................. 19 Using audio .......................................................................................................................................................... 19 Connecting speakers ......................................................................................................................... 19 vii Connecting headphones .................................................................................................................... 19 Connecting headsets ......................................................................................................................... 20 Using sound settings ......................................................................................................................... 20 Using video .......................................................................................................................................................... 20 Connecting video devices using an HDMI cable (select products only) ............................................ 20 Setting up HDMI audio .................................................................................................... 21 Discovering and connecting to Miracast-compatible wireless displays (select products only) ...... 22 5 Navigating the screen .................................................................................................................................. 23 Using TouchPad and touch screen gestures ........................................................................................................ 23 Tap ..................................................................................................................................................... 23 Two-finger pinch zoom ..................................................................................................................... 23 Two-finger slide (TouchPad only) ..................................................................................................... 24 Two-finger tap (TouchPad only) ........................................................................................................ 24 Four-finger tap (TouchPad only) ....................................................................................................... 24 Three-finger swipe (TouchPad only) ................................................................................................. 25 One-finger slide (touch screen only) ................................................................................................. 25 Using the keyboard and optional mouse ............................................................................................................. 25 Using the on-screen keyboard .......................................................................................................... 26 6 Managing power .......................................................................................................................................... 27 Initiating and exiting Sleep and Hibernation ....................................................................................................... 27 Manually initiating and exiting Sleep ................................................................................................ 28 Manually initiating and exiting Hibernation (select products only) ................................................. 28 Setting password protection on wakeup (exiting Sleep or Hibernation) ......................................... 28 Using HP Fast Charge (select products only) ....................................................................................................... 29 Using the power meter and power settings ........................................................................................................ 29 Running on battery power ................................................................................................................................... 29 Factory-sealed battery ...................................................................................................................... 30 Finding battery information .............................................................................................................. 30 Conserving battery power ................................................................................................................. 30 Identifying low battery levels ........................................................................................................... 30 Resolving a low battery level ............................................................................................................ 31 Resolving a low battery level when external power is available ................................... 31 Resolving a low battery level when no power source is available ................................. 31 Resolving a low battery level when the computer cannot exit Hibernation .................. 31 Running on AC power ........................................................................................................................................... 31 Troubleshooting power problems ..................................................................................................... 32 Shutting down (turning off) the computer .......................................................................................................... 32 viii 7 Maintaining your computer .......................................................................................................................... 34 Improving performance ....................................................................................................................................... 34 Using Disk Defragmenter .................................................................................................................. 34 Using Disk Cleanup ............................................................................................................................ 34 Using HP 3D DriveGuard (select products only) ................................................................................ 34 Identifying HP 3D DriveGuard status .............................................................................. 35 Updating programs and drivers .......................................................................................................................... 35 Cleaning your computer ...................................................................................................................................... 35 Cleaning procedures .......................................................................................................................... 35 Cleaning the display ........................................................................................................ 36 Cleaning the sides or cover ............................................................................................. 36 Cleaning the TouchPad, keyboard, or mouse (select products only) ............................. 36 Traveling with or shipping your computer .......................................................................................................... 36 8 Securing your computer and information ...................................................................................................... 38 Using passwords .................................................................................................................................................. 38 Setting Windows passwords ............................................................................................................. 38 Setting Setup Utility (BIOS) passwords ............................................................................................. 39 Using Windows Hello (select products only) ....................................................................................................... 39 Using Internet security software ......................................................................................................................... 39 Using antivirus software ................................................................................................................... 40 Using firewall software ..................................................................................................................... 40 Installing software updates ................................................................................................................................. 40 Using HP Touchpoint Manager (select products only) ........................................................................................ 41 Securing your wireless network .......................................................................................................................... 41 Backing up your software applications and information .................................................................................... 41 Using an optional security cable (select products only) ..................................................................................... 41 9 Using Setup Utility (BIOS) ............................................................................................................................. 42 Starting Setup Utility (BIOS) ................................................................................................................................ 42 Updating Setup Utility (BIOS) .............................................................................................................................. 42 Determining the BIOS version ........................................................................................................... 42 Downloading a BIOS update .............................................................................................................. 43 10 Using HP PC Hardware Diagnostics (UEFI) ..................................................................................................... 45 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device .................................................................... 45 11 Backing up, restoring, and recovering ......................................................................................................... 47 Creating recovery media and backups ................................................................................................................ 47 Creating HP Recovery media (select products only) ......................................................................... 47 ix Using Windows tools ........................................................................................................................................... 48 Restore and recovery ........................................................................................................................................... 49 Recovering using HP Recovery Manager ........................................................................................... 49 What you need to know before you get started ............................................................. 49 Using the HP Recovery partition (select products only) ................................................. 50 Using HP Recovery media to recover .............................................................................. 50 Changing the computer boot order ................................................................................ 51 Removing the HP Recovery partition (select products only) ......................................... 52 12 Specifications ............................................................................................................................................ 53 Input power .......................................................................................................................................................... 53 Operating environment ....................................................................................................................................... 53 13 Electrostatic Discharge .............................................................................................................................. 55 14 Accessibility .............................................................................................................................................. 56 Supported assistive technologies ....................................................................................................................... 56 Contacting support .............................................................................................................................................. 56 Index ............................................................................................................................................................. 57 x 1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer, fun things to do with your computer, and where to find additional HP resources. Visit the HP Apps Store The HP Apps Store offers a wide choice of popular games, entertainment and music apps, productivity apps, and apps exclusive to HP that you can download to the desktop. The selection is updated regularly and includes regional content and country-specific offers. Be sure to check the HP Apps Store frequently for new and updated features. IMPORTANT: You must be connected to the Internet to access the HP Apps Store. To view and download an app:

1. 2. Select the Start button, and then select the Store app. or Select the Store icon next to the taskbar search box. Select the app you want to download, and then follow the on-screen instructions. When the download is complete, the app appears on the All apps screen. Best practices After you set up and register the computer, we recommend the following steps to get the most out of your smart investment:

Back up your hard drive by creating recovery media. See Backing up, restoring, and recovering on page 47. If you havent already done so, connect to a wired or wireless network. See details in Connecting to a network on page 15. Become familiar with the computer hardware and software. For more information, see Getting to know your computer on page 4 and Enjoying entertainment features on page 19. Update or purchase antivirus software. See Using antivirus software on page 40. Visit the HP Apps Store 1 More HP resources To locate resources that provide product details, how-to information, and more, use this table. Contents Overview of computer setup and features Online chat with an HP technician Support telephone numbers HP service center locations Proper workstation setup Guidelines for posture and work habits that increase your comfort and decrease your risk of injury Electrical and mechanical safety information Important regulatory notices, including information about proper battery disposal, if needed. Resource Setup Instructions HP support For HP support, go to http://www.hp.com/support. Safety & Comfort Guide To access this guide:

Select the Start button, select All apps, select HP Help and Support, and then select HP Documentation. or Select the Start button, select All apps, select HP, and then select HP Documentation. or Type support in the taskbar search box, and then select the HP Support Assistant app. Select My PC, select the Specifications tab, and then select User Guides. or Click the question mark icon in the taskbar. Select My PC, select the Specifications tab, and then select User Guides. or Go to http://www.hp.com/ergo. IMPORTANT: You must be connected to the Internet to access the latest version of the user guide. Regulatory, Safety and Environmental Notices To access this document:

Select the Start button, select All apps, select HP Help and Support, and then select HP Documentation. or Select the Start button, select All apps, select HP, and then select HP Documentation. or Type support in the taskbar search box, and then select the HP Support Assistant app. Select My PC, select the Specifications tab, and then select User Guides. or 2 Chapter 1 Starting right Resource Contents Click the question mark icon in the taskbar. Select My PC, select the Specifications tab, and then select User Guides. Limited Warranty*

Specific warranty information about this computer To access this document:

Select the Start button, select All apps, select HP Help and Support, and then select HP Documentation. or Select the Start button, select All apps, select HP, and then select HP Documentation. or Type support in the taskbar search box, and then select the HP Support Assistant app. Select My PC, select the Specifications tab, and then select User Guides. or Click the question mark icon in the taskbar. Select My PC, select the Specifications tab, and then select User Guides. or Go to http://www.hp.com/go/orderdocuments. IMPORTANT: You must be connected to the Internet to access the latest version of the user guide.

*You can find your HP Limited Warranty located with the user guides on your product and/or on the CD or DVD provided in the box. In some countries or regions, HP may provide a printed warranty in the box. For countries or regions where the warranty is not provided in printed format, you can request a copy from http://www.hp.com/go/orderdocuments. For products purchased in Asia Pacific, you can write to HP at POD, PO Box 161, Kitchener Road Post Office, Singapore 912006. Include your product name, and your name, phone number, and postal address. More HP resources 3 2 Getting to know your computer Locating hardware To find out what hardware is installed on your computer:

Type device manager in the taskbar search box, and then select the Device Manager app. A list displays all the devices installed on your computer. For information about system hardware components and the system BIOS version number, press fn+esc

(select products only). Locating software To find out what software is installed on your computer:

Select the Start button, and then select All apps. or Select the Start button. or Right-click the Start button, and then select Programs and Features. 4 Chapter 2 Getting to know your computer Right side Component Description

(1) Volume button Controls speaker volume on the computer. To decrease speaker volume, press the - edge of the button. To increase speaker volume, press the + edge of the button.

(2)

(3)

(4)

(5) USB Type-C port Connects a USB device with a Type-C connector. HDMI port USB 3.0 charging (powered) ports (2) Audio-out (headphone)/Audio-in (microphone) combo jack Connects an optional video or audio device, such as a high-

definition television, any compatible digital or audio component, or a high-speed High-Definition Multimedia Interface (HDMI) device. Connect an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Standard USB ports will not charge all USB devices or will charge using a low current. Some USB devices require power and require you to use a powered port. NOTE: USB charging ports can also charge select models of cell phones and MP3 players, even when the computer is off. Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional standalone microphones. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide:

Select the Start button, select All apps (required on some products), select HP Help and Support, and then select HP Documentation. NOTE: When a device is connected to the jack, the computer speakers are disabled. Right side 5 Left side Component Description

(1)

(2)

(3)

(4) Power connector Connects an AC adapter. AC adapter and battery light White: The AC adapter is connected and the battery is fully charged. Amber: The AC adapter is connected and the battery is charging. Off: The battery is not charging. Vent Enables airflow to cool internal components. USB 3.0 charging (powered) port NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Standard USB ports will not charge all USB devices or will charge using a low current. Some USB devices require power and require you to use a powered port. NOTE: USB charging ports can also charge select models of cell phones and MP3 players, even when the computer is off. When the computer is off, press the button to turn on the computer. When the computer is on, press the button briefly to initiate Sleep. When the computer is in the Sleep state, press the button briefly to exit Sleep. When the computer is in Hibernation, press the button briefly to exit Hibernation. CAUTION: Pressing and holding down the power button results in the loss of unsaved information. If the computer has stopped responding and shutdown procedures are ineffective, press and hold the power button down for at least 5 seconds to turn off the computer. To learn more about your power settings, see your power options. Type power in the taskbar search box, and then select Power & sleep settings. or

(5) Power button 6 Chapter 2 Getting to know your computer Component Description

(6) Power light

(7) Memory card reader Display Right-click the Start button, and then select Power Options. On: The computer is on. Off: The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power. Reads optional memory cards that enable you to store, manage, share, or access information. To insert a card:

1. 2. Hold the card label-side up, with connectors facing the computer. Insert the card into the memory card reader, and then press in on the card until it is firmly seated. To remove a card:

Press in on the card, and then remove it from the memory card reader. Component Description

(1)

(2)

(3) WLAN antennas*

Internal microphones Camera light Send and receive wireless signals to communicate with wireless local area networks (WLANs). Record sound. On: The camera is in use. Display 7 Component

(4) Camera Description Allows you to video chat, record video, and record still images. To use your camera, see Using the camera on page 19.

*The antennas are not visible from the outside of the computer, and antenna location varies. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide:

Select the Start button, select All apps (required on some products), select HP Help and Support, and then select HP Documentation. 8 Chapter 2 Getting to know your computer Top TouchPad Component

(1)

(2)

(3) TouchPad zone Description Reads your finger gestures to move the pointer or activate items on the screen. For more information, see Using TouchPad and touch NOTE:

screen gestures on page 23. Left TouchPad button Right TouchPad button Functions like the left button on an external mouse. Functions like the right button on an external mouse. Top 9 Lights Component Description

(1) Caps lock light

(2) Mute light On: Caps lock is on, which switches the key input to all capital letters. Amber: Computer sound is off. Off: Computer sound is on. 10 Chapter 2 Getting to know your computer Keys Component Description

(1)

(2)

(3)

(4)

(5) esc key fn key Displays system information when pressed in combination with the fn key. Executes specific functions when pressed in combination with the esc key or the spacebar. Windows key Opens the Start menu. NOTE: Pressing the Windows key again will close the Start menu. Action keys Execute frequently used system functions. NOTE: On select products, the f5 action key turns the keyboard backlight feature off or on. Windows application key Displays options for a selected object. Using the action keys An action key performs an assigned function. The icon on each action key illustrates the function for that key. Icon Description Opens the Get started app. Decreases the screen brightness incrementally as long as you hold down the key. Top 11 Icon Description Increases the screen brightness incrementally as long as you hold down the key. Switches the screen image between display devices connected to the system. For example, if a monitor is connected to the computer, repeatedly pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. Turns the keyboard backlight off or on. NOTE: To conserve battery power, turn off this feature. Plays the previous track of an audio CD or the previous section of a DVD or a Blu-ray Disc (BD). Starts, pauses, or resumes playback of an audio CD, a DVD, or a BD. Plays the next track of an audio CD or the next section of a DVD or a BD. Decreases speaker volume incrementally while you hold down the key. Increases speaker volume incrementally while you hold down the key. Mutes or restores speaker sound. Turns the airplane mode and wireless feature on or off. NOTE: The airplane mode key is also referred to as the wireless button. NOTE: A wireless network must be set up before a wireless connection is possible. 12 Chapter 2 Getting to know your computer Front Component Speakers Labels Description Produce sound. The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the service door, or on the back of the display. Service labelProvides important information to identify your computer. When contacting support, you will probably be asked for the serial number, and possibly for the product number or the model number. Locate these numbers before you contact support. Your service label will resemble one of the examples shown below. Refer to the illustration that most closely matches the service label on your computer. Component

(1)

(2)

(3)

(4) Serial number Product number Warranty period Model number (select products only) Front 13 Component

(1)

(2)

(3)

(4)

(5) HP product name (select products only) Model name (select products only) Product number Serial number Warranty period Regulatory label(s)Provide(s) regulatory information about the computer. Wireless certification label(s)Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. 14 Chapter 2 Getting to know your computer 3 Connecting to a network Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Your computer may be equipped with one or more of the following wireless devices:

WLAN deviceConnects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point. HP Mobile Broadband ModuleGives you wireless connectivity over a wireless wide area network

(WWAN), a much larger area. Mobile network operators install base stations (similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries. Bluetooth deviceCreates a personal area network (PAN) to connect to other Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close togethertypically within 10 meters (approximately 33 feet) of each other. Select the Start button, and then select the Get started app. Using the wireless controls You can control the wireless devices in your computer using one or more of these features:

Airplane mode key (also called wireless button or wireless key) (referred to in this chapter as airplane mode key) Operating system controls Airplane mode key The computer may have an airplane mode key, one or more wireless devices, and one or two wireless lights. All the wireless devices on your computer are enabled at the factory. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. Operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems. To use operating system controls:

1. 2. Type control panel in the taskbar search box, and then select Control Panel. Select Network and Internet, and then select Network and Sharing Center. Connecting to a wireless network 15 Connecting to a WLAN NOTE: When you are setting up Internet access in your home, you must establish an account with an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the Internet service. To connect to a WLAN, follow these steps:

1. 2. Be sure that the WLAN device is on. Select the network status icon in the taskbar, and then connect to one of the available networks. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and then select Next to complete the connection. NOTE:

If no WLANs are listed, you may be out of range of a wireless router or access point. If you do not see the WLAN you want to connect to, right-click the network status icon in the NOTE:

taskbar, and then select Open Network and Sharing Center. Select Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection. 3. Follow the on-screen instructions to complete the connection. After the connection is made, select the network status icon at the far right of the taskbar, to verify the name and status of the connection. NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. Using HP Mobile Broadband (select products only) Your HP Mobile Broadband computer has built-in support for mobile broadband service. Your new computer, when used with a mobile operators network, gives you the freedom to connect to the Internet, send e-mail, or connect to your corporate network without the need for Wi-Fi hotspots. You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband service. The number may be printed on a label located on the bottom of your computer, inside the battery bay, under the service door, or on the back of the display. or You can find the number following these steps:

1. 2. 3. From the taskbar, select the network status icon. Select View Connection Settings. Under the Mobile broadband section, select the network status icon. Some mobile network operators require the use of a subscriber identity module (SIM) card. A SIM card contains basic information about you, such as a personal identification number (PIN), as well as network information. Some computers include a SIM card that is preinstalled. If the SIM card is not preinstalled, it may be included with the HP Mobile Broadband documents provided with your computer, or the mobile network operator may provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your computer. 16 Chapter 3 Connecting to a network Using GPS (select products only) Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver location, speed, and direction information to GPS-equipped systems. To enable GPS, make sure location is enabled under the Windows privacy setting. 1. 2. Type location in the taskbar search box, and then select Location privacy settings. Follow the on-screen instructions for using location settings. For more information, see the Get started app. Select the Start button, and then select the Get started app. Using Bluetooth wireless devices (select products only) Computers (desktop, notebook) Phones (cellular, cordless, smartphone) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following:

Audio devices (headset, speakers) Imaging devices (printer, camera) External keyboard Mouse Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices. For information about configuring and using Bluetooth devices, see the Get started app. Select the Start button, and then select the Get started app. Connecting Bluetooth devices Before you can use a Bluetooth device, you must establish a Bluetooth connection. 1. 2. 3. Type bluetooth in the taskbar search box, and then select Bluetooth settings. Turn on Bluetooth, if it is not already turned on. Select your device from the list, and then follow the on-screen instructions. NOTE:

If the device requires verification, a pairing code is displayed. On the device you are adding, follow the on-screen instructions to verify that the code on your device matches the pairing code. For more information, refer to the documentation provided with the device. NOTE:

devices may have additional requirements; refer to the documentation provided with the device. If your device does not appear in the list, be sure that Bluetooth on that device is turned on. Some Connecting to a wired networkLAN (select products only) Use a LAN connection if you want to connect the computer directly to a router in your home (instead of working wirelessly), or if you want to connect to an existing network at your office. Connecting to a LAN requires an 8-pin, RJ-45 (network) cable and a network jack or an optional docking device or expansion port, if there is no RJ-45 jack on the computer. Connecting to a wired networkLAN (select products only) 17 To connect the network cable, follow these steps:

1. 2. Plug the network cable into the network jack (1) on the computer. Plug the other end of the network cable into a network wall jack (2) or router. If the network cable contains noise suppression circuitry (3), which prevents interference from NOTE:

TV and radio reception, orient the circuitry end of the cable toward the computer. Sharing data and drives and accessing software When your computer is part of a network, you are not limited to using only the information that is stored in your computer. Computers connected to the network can exchange software and data with each other. For more information about sharing files, folders, or drives, see the information provided in the Get started app. Select the Start button, and then select the Get started app. NOTE: When a disc like a DVD movie or game is copy-protected, it cannot be shared. 18 Chapter 3 Connecting to a network 4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the camera, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like a monitor, projector, TV, speakers, or headphones. Using the camera Your computer has one or more cameras that enable you to connect with others for work or play. Cameras may be front facing, rear facing, or pop up. See Getting to know your computer on page 4 for camera details. Most cameras allow you to video chat, record video, and record still images. Some also provide HD (high-

definition) or 3D capability, apps for gaming, or facial recognition software like Windows Hello. See Securing your computer and information on page 38 for details about using Windows Hello. To use your camera:

Type camera in the taskbar search box, and then select Camera from the list of applications. Using audio On your computer, or on select products using an external optical drive, you can play music CDs, download and listen to music, stream audio content from the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones. Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or to the audio-out

(headphone)/audio-in (microphone) combo jack on your computer or on a docking station. To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect high-definition speakers to the computer, see Setting up HDMI audio on page 21. Before connecting speakers, lower the volume setting. Connecting headphones WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document:

Select the Start button, select All apps (required on some products), select HP Help and Support, and then select HP Documentation. You can connect wired headphones to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. To connect wireless headphones to your computer, follow the device manufacturer's instructions. Using the camera 19 Connecting headsets WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document:

Select the Start button, select All apps (required on some products), select HP Help and Support, and then select HP Documentation. Headphones combined with a microphone are called headsets. You can connect wired headsets to the audio-

out (headphone)/audio-in (microphone) combo jack on your computer. To connect wireless headsets to your computer, follow the device manufacturer's instructions. Using sound settings Use sound settings to adjust system volume, change system sounds, or manage audio devices. To view or change sound settings:

Type control panel in the taskbar search box, select Control Panel, select Hardware and Sound, and then select Sound. or Right-click the Start button, select Control Panel, select Hardware and Sound, and then select Sound. Your computer may include an enhanced sound system by Bang & Olufsen, B&O Play, DTS, Beats audio, or another provider. As a result, your computer may include advanced audio features that can be controlled through an audio control panel specific to your sound system. Use the audio control panel to view and control audio settings. Type control panel in the taskbar search box, select Control Panel, select Hardware and Sound, and then select the audio control panel specific to your system. or Right-click the Start button, select Control Panel, select Hardware and Sound, and then select the audio control panel specific to your system. Using video Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network. To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information on using your video features, refer to HP Support Assistant. Connecting video devices using an HDMI cable (select products only) NOTE: To connect an HDMI device to your computer, you need an HDMI cable, purchased separately. 20 Chapter 4 Enjoying entertainment features To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the following instructions:

1. Connect one end of the HDMI cable to the HDMI port on the computer. 2. 3. Connect the other end of the cable to the high-definition TV or monitor. PC screen only: View the screen image on the computer only. Press f4 to alternate the computer screen image between 4 display states:

Second screen only: View the screen image on the external device only. Duplicate: View the screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across both the computer and the external device. Each time you press f4, the display state changes. NOTE:

For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. Type control panel in the taskbar search box, select Control Panel, and then select Appearance and Personalization. Under Display, select Adjust resolution or Make text and other items larger or smaller. Setting up HDMI audio HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following these steps:

1. 2. 3. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. On the Playback tab, select the name of the digital output device. Click Set Default, and then click OK. To return the audio stream to the computer speakers:

1. 2. 3. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click Playback devices. On the Playback tab, click Speakers. Click Set Default, and then click OK. Using video 21 Discovering and connecting to Miracast-compatible wireless displays (select products only) To discover and connect to Miracast-compatible wireless displays without leaving your current apps, follow the steps below. To open Miracast:

Type project in the taskbar search box, and then click Project to a second screen. Click Connect to a wireless display, and then follow the on-screen instructions. 22 Chapter 4 Enjoying entertainment features 5 Navigating the screen Use touch gestures directly on the computer screen (select products only) You can navigate the computer screen in the following ways:

Use an on-screen keyboard (select products only) Use touch gestures on the TouchPad Use keyboard and optional mouse (mouse purchased separately) Using TouchPad and touch screen gestures The TouchPad helps you navigate the computer screen and control the pointer using simple touch gestures. You can also use the left and right TouchPad buttons as you would use the corresponding buttons on an external mouse. To navigate a touch screen (select products only), touch the screen directly using gestures described in this chapter. You can also customize gestures and view demonstrations of how they work. Type control panel in the taskbar search box, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. NOTE: Unless noted, gestures can be used on the TouchPad or a touch screen (select products only). Tap Use the tap/double-tap gesture to select or open an item on the screen. Point to an item on the screen, and then tap one finger on the TouchPad zone or touch screen to select the item. Double-tap an item to open it. Two-finger pinch zoom Use the two-finger pinch zoom to zoom out or in on images or text. Zoom out by placing two fingers apart on the TouchPad zone or touch screen and then moving your fingers together. Zoom in by placing two fingers together on the TouchPad zone or touch screen and then moving your fingers apart. Using TouchPad and touch screen gestures 23 Two-finger slide (TouchPad only) Use the two-finger slide to move up, down, or sideways on a page or image. Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or right. Two-finger tap (TouchPad only) Use the two-finger tap to open the menu for an object on the screen. NOTE: The two-finger tap performs the same function as right-clicking with the mouse. Tap two fingers on the TouchPad zone to open the options menu for the selected object. Four-finger tap (TouchPad only) Use the four-finger tap to open the action center. Tap four fingers on the Touchpad to open the action center and view current settings and notifications. 24 Chapter 5 Navigating the screen Three-finger swipe (TouchPad only) Swipe 3 fingers away from you to see all open windows. Use the three-finger swipe to view open windows and to switch between open windows and the desktop. Swipe 3 fingers left or right to switch between open windows. Swipe 3 fingers toward you to show the desktop. One-finger slide (touch screen only) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. To move an object, press and hold your finger on an object, and then drag your finger to move the object. Using the keyboard and optional mouse The keyboard and optional mouse allow you to type, select items, scroll, and perform the same functions as you do using touch gestures. The keyboard also allows you to use action keys and key combinations to perform specific functions. Using the keyboard and optional mouse 25 NOTE: Depending on the country or region, your keyboard may have different keys and keyboard functions than those discussed in this section. Using the on-screen keyboard The computer has an on-screen keyboard that is displayed when you are in tablet mode. 1. 2. To display the on-screen keyboard, tap the keyboard icon in the notification area, at the far right of the taskbar. Begin typing. To access settings for the on-screen keyboard, type control panel in the taskbar search box, select Control Panel, select Devices and Printers, and then select Typing. NOTE: Action keys do not display or function on the on-screen keyboard. NOTE: Suggested words may be displayed above the on-screen keyboard. Tap a word to select it. 26 Chapter 5 Navigating the screen 6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power only and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Initiating and exiting Sleep and Hibernation CAUTION: Several well-known vulnerabilities exist when a computer is in the Sleep state. To prevent an unauthorized user from accessing data on your computer, even encrypted data, HP recommends that you always initiate Hibernation instead of Sleep anytime the computer will be out of your physical possession. This practice is particularly important when you travel with your computer. Windows has two power-saving states, Sleep and Hibernation. SleepThe Sleep state is automatically initiated after a period of inactivity. Your work is saved to memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more information, see Manually initiating and exiting Sleep on page 28. HibernationThe Hibernation state is automatically initiated if the battery reaches a critical level. In the Hibernation state, your work is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually. For more information, see Manually initiating and exiting Hibernation

(select products only) on page 28. CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate the Sleep state while reading from or writing to a disc or an external media card. Initiating and exiting Sleep and Hibernation 27 Manually initiating and exiting Sleep You can initiate Sleep in any of the following ways:

Close the display. Select the Start button, select the Power icon, and then select Sleep. Briefly press the power button. You can exit Sleep in any of the following ways:

If the computer is closed, raise the display. Press a key on the keyboard. Tap the TouchPad. When the computer exits Sleep, your work returns to the screen. NOTE:

before your work returns to the screen. If you have set a password to be required on exiting Sleep, you must enter your Windows password Manually initiating and exiting Hibernation (select products only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. 2. 3. Type power options in the taskbar search box, and then select Power Options. or Right-click the Power meter icon

, and then select Power Options. In the left pane, select Choose what the power button does. Select Change Settings that are currently unavailable, and then, in the When I press the power button area, select Hibernate. or Under Shutdown settings, select the Hibernate box to show the Hibernate option in the Power menu. 4. Select Save changes. To exit Hibernation:

Briefly press the power button. When the computer exits Hibernation, your work returns to the screen. NOTE:

password before your work returns to the screen. If you have set a password to be required on exiting Hibernation, you must enter your Windows Setting password protection on wakeup (exiting Sleep or Hibernation) To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps:

1. Type power options in the taskbar search box, and then select Power Options. or 28 Chapter 6 Managing power Right-click the Power meter icon

, and then select Power Options. 2. 3. 4. In the left pane, select Require a password on wakeup. Select Change Settings that are currently unavailable. Select Require a password (recommended). NOTE: To create a user account password or change your current user account password, select Create or change your user account password, and then follow the on-screen instructions. If you do not need to create or change a user account password, go to step 5. 5. Select Save changes. Using HP Fast Charge (select products only) The HP Fast Charge feature allows you to quickly charge your computer battery. Depending on your computer model and AC adapter, Fast Charge operates in one of the following ways:

When the battery charge remaining is between zero and 50%, the battery will charge to 50% of full capacity in no more than 30 minutes. When the battery charge remaining is between zero and 90%, the battery will charge to 90% of full capacity in no more than 90 minutes. To use HP Fast Charge, shut down your computer and then connect the AC adapter to your computer and to external power. Using the power meter and power settings The power meter is located on the Windows taskbar. The power meter allows you to quickly access power settings and view the remaining battery charge. To view the percentage of remaining battery charge and the current power plan, place the mouse pointer over the power meter icon

. To use Power Options, rightclick the power meter icon can also type power options in the task bar search box, and then select Power Options.

, and then select an item from the list. You Different power meter icons indicate whether the computer is running on battery or external power. Placing the mouse pointer over the icon reveals a message if the battery has reached a low or critical battery level. Running on battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. When the computer is off and unplugged from external power, the battery in the computer slowly discharges. The computer displays a message when the battery reaches a low or critical battery level. Computer battery life varies, depending on power management settings, programs running on the computer, screen brightness, external devices connected to the computer, and other factors. Using HP Fast Charge (select products only) 29 Factory-sealed battery To monitor the status of the battery, or if the battery is no longer holding a charge, run HP Battery Check in the HP Support Assistant app. 1. 2. Type support in the taskbar search box, and then select the HP Support Assistant app. or Click the question mark icon in the taskbar. Select My PC, select the Diagnostics and tools tab, and then select HP Battery Check. If HP Battery Check indicates that your battery should be replaced, contact support. The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Finding battery information To access battery information:

1. 2. Type support in the taskbar search box, and then select the HP Support Assistant app. or Click the question mark icon in the taskbar. Select My PC, select the Diagnostics and tools tab, and then select HP Battery Check. If HP Battery Check indicates that your battery should be replaced, contact support. HP Support Assistant provides the following tools and information about the battery:

Information about battery types, specifications, life cycles, and capacity HP Battery Check Conserving battery power Lower the brightness of the display. To conserve battery power and maximize battery life:

Select the Power saver setting in Power Options. Turn off wireless devices when you are not using them. Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port. Stop, disable, or remove any external media cards that you are not using. Before you leave your work, initiate Sleep or shut down the computer. Identifying low battery levels When a battery that is the sole power source for the computer reaches a low or critical battery level, the following behavior occurs:

The battery light (select products only) indicates a low or critical battery level. or 30 Chapter 6 Managing power The power meter icon shows a low or critical battery notification. NOTE:

settings on page 29. For additional information about the power meter, see Using the power meter and power The computer takes the following actions for a critical battery level:

If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in the Sleep state and then shuts down and loses any unsaved information. If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates Hibernation. Resolving a low battery level Resolving a low battery level when external power is available AC adapter Connect one of the following to the computer and to external power:

Optional power adapter purchased as an accessory from HP Optional docking or expansion device Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation 1. 2. Connect the AC adapter to the computer and to external power. Exit Hibernation by pressing the power button. Running on AC power For information about connecting to AC power, refer to the Setup Instructions poster provided in the computer box. The computer does not use battery power when the computer is connected to AC power with an approved AC adapter or an optional docking/expansion device. WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. Connect the computer to AC power under any of the following conditions:

WARNING! Do not charge the computer battery while you are aboard aircraft. When charging or calibrating a battery When installing or updating system software When updating the system BIOS When writing information to a disc (select products only) Running on AC power 31 When running Disk Defragmenter on computers with internal hard drives When performing a backup or recovery The battery begins to charge. When you connect the computer to AC power:

The screen brightness increases. The power meter icon changes appearance. The computer switches to battery power. When you disconnect AC power:

The power meter icon changes appearance. The screen brightness automatically decreases to save battery life. Troubleshooting power problems The computer does not turn on. Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power:

The display does not turn on. The power lights do not turn on. To test the AC adapter:

1. 2. 3. Shut down the computer. Connect the AC adapter to the computer and to the power cord, and then plug the power cord into an AC outlet. Turn on the computer. If the power lights turn on, the AC adapter is working properly. If the power lights remain off, check the connection from the AC adapter to the computer and the connection from the power cord to the AC outlet to be sure that the connections are secure. If the connections are secure and the power lights remain off, the AC adapter is not functioning and should be replaced. Contact support for information about obtaining a replacement AC power adapter. Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer. 32 Chapter 6 Managing power When you need to access components inside the computer Shut down the computer under any of the following conditions:

When you are connecting an external hardware device that does not connect to a USB or video port When the computer will be unused and disconnected from external power for an extended period Although you can turn off the computer with the power button, the recommended procedure is to use the Windows Shut down command. NOTE:

pressing the power button. If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by briefly 1. 2. Save your work and close all open programs. Select the Start button, select the Power icon, and then select Shut down. If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

Press ctrl+alt+delete, select the Power icon, and then select Shut down. Press and hold the power button for at least 10 seconds. Disconnect the computer from external power. Shutting down (turning off) the computer 33 7 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition. This chapter explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating programs and drivers, steps to clean the computer, and tips for traveling with (or shipping) the computer. Improving performance You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup. Using Disk Defragmenter HP recommends using Disk Defragmenter to defragment your hard drive at least once a month. NOTE:

It is not necessary to run Disk Defragmenter on solid-state drives. To run Disk Defragmenter:

1. 2. 3. Connect the computer to AC power. Type defragment in the taskbar search box, and then select Defragment and optimize your drives. Follow the on-screen instructions. For additional information, access the Disk Defragmenter software Help. Using Disk Cleanup Use Disk Cleanup to search the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer run more efficiently. To run Disk Cleanup:

1. 2. Type disk in the taskbar search box, and then select Free up disk space by deleting unnecessary files or Uninstall apps to free up disk space. Follow the on-screen instructions. Using HP 3D DriveGuard (select products only) HP 3D DriveGuard protects a hard drive by parking the drive and halting data requests under either of the following conditions:

You move the computer with the display closed while the computer is running on battery power. You drop the computer. A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal operation. NOTE: Only internal hard drives are protected by HP 3D DriveGuard. A hard drive installed in an optional docking device or connected to a USB port is not protected by HP 3D DriveGuard. 34 Chapter 7 Maintaining your computer NOTE: Because solid-state drives (SSDs) lack moving parts, HP 3D DriveGuard is unnecessary for these drives. For more information, see the HP 3D DriveGuard software Help. Identifying HP 3D DriveGuard status The hard drive light on the computer changes color to show that the drive in a primary hard drive bay and/or the drive in a secondary hard drive bay (select products only) is parked. To determine whether a drive is currently protected or whether it is parked, view the icon on the Windows desktop in the notification area, at the far right of the taskbar. Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis. Updates can resolve issues and bring new features and options to your computer. For example, older graphics components might not work well with the most recent gaming software. Without the latest driver, you would not be getting the most out of your equipment. Go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition, register to receive automatic notifications when updates become available. If you would like to update your programs and drivers, follow these instructions:

1. 2. 3. Type support in the taskbar search box, and then select the HP Support Assistant app.

- or -

Click the question mark icon in the taskbar. Select My PC, select the Updates tab, and then select Check for updates and messages. Follow the on-screen instructions. Cleaning your computer Use the following products to safely clean your computer:

Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (for example, disposable wipes, which come in a variety of brands) Alcohol-free glass-cleaning fluid Solution of water and mild soap Dry microfiber cleaning cloth or a chamois (static-free cloth without oil) Static-free cloth wipes CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are not sure that a cleaning product is safe for your computer, check the product contents to make sure that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product. Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning agents can get trapped in the scratches. Cleaning procedures Follow the procedures in this section to safely clean your computer. Updating programs and drivers 35 WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer while it is on. 1. 2. 3. Disconnect all powered external devices. Turn off the computer. Disconnect AC power. CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on any computer surface. Liquids dripped on the surface can permanently damage internal components. Cleaning the display Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that a display is dry before you close the computer. Cleaning the sides or cover To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously, or use an acceptable disposable wipe. NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris. Cleaning the TouchPad, keyboard, or mouse (select products only) WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. CAUTION: To prevent damage to internal components, do not allow liquids to drip between the keys. To clean the TouchPad, keyboard, or mouse, use a soft microfiber cloth or a chamois moistened with one of the cleaning solutions listed previously or use an acceptable disposable wipe. To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a can of compressed air with a straw extension. Traveling with or shipping your computer If you have to travel with or ship your computer, follow these tips to keep your equipment safe. Prepare the computer for traveling or shipping:

Back up your information to an external drive. Remove all discs and all external media cards, such as memory cards. Turn off and then disconnect all external devices. Shut down the computer. Take along a backup of your information. Keep the backup separate from the computer. When traveling by air, carry the computer as hand luggage; do not check it in with the rest of your luggage. CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. 36 Chapter 7 Maintaining your computer If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you are allowed to use your computer. In-flight computer use is at the discretion of the airline. If you are shipping the computer or a drive, use suitable protective packaging and label the package FRAGILE. The use of wireless devices may be restricted in some environments. Such restrictions may apply aboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a wireless device in your computer, ask for authorization to use your computer before you turn it on. If you are traveling internationally, follow these suggestions:

Check the computer-related customs regulations for each country or region on your itinerary. Check the power cord and adapter requirements for each location in which you plan to use the computer. Voltage, frequency, and plug configurations vary. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. Traveling with or shipping your computer 37 8 Securing your computer and information Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, the Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. IMPORTANT: Some security features listed in this chapter may not be available on your computer. Using passwords A password is a group of characters that you choose to secure your computer information and to protect online transactions. Several types of passwords can be set. For example, when you set up your computer for the first time, you were asked to create a user password to secure your computer. Additional passwords can be set in Windows or in HP Setup Utility (BIOS), which is preinstalled on your computer. You may find it helpful to use the same password for a Setup Utility (BIOS) feature and for a Windows security feature. To create and save passwords, use the following tips:

To reduce the risk of being locked out of the computer, record each password and store it in a secure place away from the computer. Do not store passwords in a file on the computer. When creating passwords, follow requirements set by the program. Change your passwords at least every 3 months. An ideal password is long and has letters, punctuation, symbols, and numbers. Before you send your computer for service, back up your files, delete confidential files, and then remove all password settings. For additional information about Windows passwords, such as screen-saver passwords:

Type support in the taskbar search box, and then select the HP Support Assistant app. or Click the question mark icon in the taskbar. Setting Windows passwords Password User password Function Protects access to a Windows user account. Administrator password Protects administrator-level access to computer contents. NOTE: This password cannot be used to access Setup Utility

(BIOS) contents. 38 Chapter 8 Securing your computer and information Setting Setup Utility (BIOS) passwords Password Administrator password Power-on password Function Must be entered each time you access Setup Utility (BIOS). If you forget your administrator password, you cannot access Setup Utility (BIOS). Must be entered each time you turn on or restart the computer. If you forget your power-on password, you cannot turn on or restart the computer. To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):

CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. NOTE: To start Setup Utility, your computer must be in notebook mode and you must use the keyboard attached to your notebook. The on-screen keyboard, which displays in tablet mode, cannot access Setup Utility. 1. Start Setup Utility (BIOS):

Computers or tablets with keyboards:

Turn on or restart the computer, quickly press esc, and then press f10. Tablets without keyboards:

1. Turn on or restart the tablet, and then quickly hold down the volume down button.

- or -

Turn on or restart the tablet, and then quickly hold down the Windows button. 2. Tap f10. 2. Select Security, and then follow the on-screen instructions. Your changes take effect when the computer restarts. Using Windows Hello (select products only) On products equipped with a fingerprint reader or an infrared camera, you can use Windows Hello to sign in by swiping your finger or looking at the camera. To set up Windows Hello, follow these steps:

1. 2. Select the Start button, select Settings, select Accounts, and then select Sign-in options. Under Windows Hello, follow the on-screen instructions to add both a password and a 4-digit PIN, and then enroll your fingerprint or facial ID. Using Internet security software When you use your computer to access email, a network, or the Internet, you potentially expose your computer to computer viruses, spyware, and other online threats. To help protect your computer, Internet Using Windows Hello (select products only) 39 security software that includes antivirus and firewall features may be preinstalled on your computer as a trial offer. To provide ongoing protection against newly discovered viruses and other security risks, security software must be kept up to date. It is strongly recommended that you upgrade the security software trial offer or purchase the software of your choice in order to fully protect your computer. Using antivirus software Computer viruses can disable programs, utilities, or the operating system, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. An antivirus program may be preinstalled on your computer. It is strongly recommended that you use the antivirus program of your choice in order to fully protect your computer. For more information about computer viruses, type support in the taskbar search box, and then select the HP Support Assistant app. or Click the question mark icon in the taskbar. Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be software you install on your computer and/or network, or it can be a combination of both hardware and software. There are two types of firewalls to consider:

Host-based firewallsSoftware that protects only the computer it is installed on. Network-based firewallsInstalled between your DSL or cable modem and your home network to protect all the computers on the network. When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked. Installing software updates HP, Windows, and third-party software installed on your computer should be regularly updated to correct security problems and improve software performance. CAUTION: Microsoft sends out alerts regarding Windows updates, which may include security updates. To protect the computer from security breaches and computer viruses, install all updates from Microsoft as soon as you receive an alert. You can install these updates automatically. To view or change the settings:

1. 2. 3. Select the Start button, select Settings, and then select Update & Security. Select Windows Update, and then follow the on-screen instructions. To schedule a time for installing updates, select Advanced Options, and then follow the on-screen instructions. 40 Chapter 8 Securing your computer and information Using HP Touchpoint Manager (select products only) HP Touchpoint Manager is a cloud-based IT solution that enables businesses to effectively manage and secure their company assets. HP Touchpoint Manager helps protect devices against malware and other attacks, monitors device health, and enables you to reduce time spent solving end-user device and security issues. You can quickly download and install the software, which is highly cost effective relative to traditional in-

house solutions. Securing your wireless network When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and airports may not provide any security. Backing up your software applications and information Regularly back up your software applications and information to protect them from being permanently lost or damaged through a virus attack or a software or hardware failure. Using an optional security cable (select products only) A security cable (purchased separately) is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. To connect a security cable to your computer, follow the device manufacturer's instructions. Using HP Touchpoint Manager (select products only) 41 9 Using Setup Utility (BIOS) Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory. NOTE: To start Setup Utility on convertible computers, your computer must be in notebook mode and you must use the keyboard attached to your notebook. Starting Setup Utility (BIOS) CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. Computers or tablets with keyboards:

Turn on or restart the computer, quickly press esc, and then press f10. Tablets without keyboards:

1. Turn on or restart the tablet, and then quickly hold down the volume up button.

- or -

Turn on or restart the tablet, and then quickly hold down the volume down button.

- or -

Turn on or restart the tablet, and then quickly hold down the Windows button. 2. Tap f10. Updating Setup Utility (BIOS) Updated versions of Setup Utility (BIOS) may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To decide whether you need to update Setup Utility (BIOS), first determine the BIOS version on your computer. To reveal the BIOS version information (also known as ROM date and System BIOS), use one of these options. HP Support Assistant 1. Type support in the taskbar search box, and then select the HP Support Assistant app. or 42 Chapter 9 Using Setup Utility (BIOS) Click the question mark icon in the taskbar. 2. Select My PC, and then select Specifications. Setup Utility (BIOS) 1. 2. 3. Start Setup Utility (BIOS) (see Starting Setup Utility (BIOS) on page 42). Select Main, select System Information, and then make note of the BIOS version. Select Exit, select No, and then follow the on-screen instructions. To check for later BIOS versions, see Downloading a BIOS update on page 43. Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet. Do not insert, remove, connect, or disconnect any device, cable, or cord. Do not shut down the computer or initiate Sleep. NOTE:

software updates, especially system BIOS updates. If your computer is connected to a network, consult the network administrator before installing any 1. 2. 3. 4. Type support in the taskbar search box, and then select the HP Support Assistant app. or Click the question mark icon in the taskbar. Click Updates, and then click Check for updates and messages. Follow the on-screen instructions. At the download area, follow these steps:

a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. If the update is more recent than your BIOS version, make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. b. Follow the on-screen instructions to download your selection to the hard drive. Make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. BIOS installation procedures vary. Follow any instructions that appear on the screen after the download is complete. If no instructions appear, follow these steps:

1. 2. 3. Type file in the taskbar search box, and then select File Explorer. Click your hard drive designation. The hard drive designation is typically Local Disk (C:). Using the hard drive path you recorded earlier, open the folder that contains the update. Updating Setup Utility (BIOS) 43 4. 5. Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. 44 Chapter 9 Using Setup Utility (BIOS) 10 Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components. When HP PC Hardware Diagnostics UEFI detects a failure that requires hardware replacement, a 24-digit Failure ID code is generated. This ID code can then be provided to support to help determine how to correct the problem. To start HP PC Hardware Diagnostics (UEFI), follow these steps:

1. Start BIOS. Tablets with keyboards Turn on or restart the computer, quickly press esc. Tablets without keyboards Turn on or restart the tablet, and then quickly hold down the volume up button.

- or -

Turn on or restart the tablet, and then quickly hold down the volume down button.

- or -

Turn on or restart the tablet, and then quickly hold down the Windows button. 2. Press or tap f2. The BIOS searches three places for the diagnostic tools, in the following order:

a. Connected USB drive NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 45. b. c. Hard drive BIOS 3. When the diagnostic tool opens, select the type of diagnostic test you want to run, and then follow the on-screen instructions. NOTE: To stop a test, press the button you used to access UEFI. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device NOTE: The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English only, and you must use a Windows computer to download and create the HP UEFI support environment because only .exe files are offered. There are two options to download HP PC Hardware Diagnostics to a USB device. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 45 Download the latest UEFI version 1. 2. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. In the HP PC Hardware Diagnostics section, select the Download link, and then select Run. Download any version of UEFI for a specific product 1. 2. 3. 4. 5. Go to http://www.hp.com/support. Select Get Software and drivers. Enter the product name or number. or Select Identify now to let HP automatically detect your product. Select your computer, and then select your operating system. In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version you want. 46 Chapter 10 Using HP PC Hardware Diagnostics (UEFI) 11 Backing up, restoring, and recovering This chapter provides information about the following processes. The information in the chapter is standard procedure for most products. Creating recovery media and backups Restoring and recovering your system For additional information, refer to the HP support assistant app. Type support in the taskbar search box, and then select the HP Support Assistant app. or Click the question mark icon in the taskbar. IMPORTANT:

70% charged before you start the recovery process. If you will be performing recovery procedures on a tablet, the tablet battery must be at least IMPORTANT:

beginning any recovery process. For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before Creating recovery media and backups The following methods of creating recovery media and backups are available on select products only. Choose the available method according to your computer model. Use HP Recovery Manager to create HP Recovery media after you successfully set up the computer. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For information on creating recovery media, see Creating HP Recovery media (select products only) on page 47. For information on the recovery options that are available using the recovery media, see Using Windows tools on page 48. Use Windows tools to create system restore points and create backups of personal information. For more information, see Recovering using HP Recovery Manager on page 49. NOTE:

If storage is 32 GB or less, Microsoft System Restore is disabled by default. Creating HP Recovery media (select products only) If possible, check for the presence of the Recovery partition and the Windows partition. From the Start menu, select File Explorer, and then select This PC. If your computer does not list the Windows partition and the Recovery partition, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information on the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. Creating recovery media and backups 47 You can use Windows tools to create system restore points and create backups of personal information, see Using Windows tools on page 48. If your computer does list the Recovery partition and the Windows partition, you can use HP Recovery Manager to create recovery media after you successfully set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the original operating system and software programs that were installed at the factory and then configures the settings for the programs. HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive. Only one set of recovery media can be created. Handle these recovery tools carefully, and keep them in a safe place. HP Recovery Manager examines the computer and determines the required storage capacity for the media that will be required. To create recovery discs, your computer must have an optical drive with DVD writer capability, and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use rewritable discs such as CDRW, DVDRW, double-layer DVDRW, or BD-RE (rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or, instead, you can use a high-

quality blank USB flash drive. If your computer does not include an integrated optical drive with DVD writer capability, but you would like to create DVD recovery media, you can use an external optical drive (purchased separately) to create recovery discs. If you use an external optical drive, it must be connected directly to a USB port on the computer; the drive cannot be connected to a USB port on an external device, such as a USB hub. If you cannot create DVD media yourself, you can obtain recovery discs for your computer from HP. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information on the HP website. Go to http://www.hp.com/

support, select your country or region, and follow the on-screen instructions. Be sure that the computer is connected to AC power before you begin creating the recovery media. The creation process can take an hour or more. Do not interrupt the creation process. If necessary, you can exit the program before you have finished creating all of the recovery DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery Manager, you will be prompted to continue. To create HP Recovery media:

IMPORTANT:

beginning these steps. For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before 1. 2. Type recovery in the taskbar search box, and then select HP Recovery Manager. Select Create recovery media, and then follow the on-screen instructions. If you ever need to recover the system, see Recovering using HP Recovery Manager on page 49. Using Windows tools You can create recovery media, system restore points, and backups of personal information using Windows tools. NOTE:

If storage is 32 GB or less, Microsoft System Restore is disabled by default. For more information and steps, see the Get started app. Select the Start button, and then select the Get started app. 48 Chapter 11 Backing up, restoring, and recovering Restore and recovery There are several options for recovering your system. Choose the method that best matches your situation and level of expertise:

IMPORTANT: Not all methods are available on all products. Windows offers several options for restoring from backup, refreshing the computer, and resetting the computer to its original state. For more information see the Get started app. Select the Start button, and then select the Get started app. If you need to correct a problem with a preinstalled application or driver, use the Reinstall drivers and/or applications option (select products only) of HP Recovery Manager to reinstall the individual application or driver. Type recovery in the taskbar search box, select HP Recovery Manager, select Reinstall drivers and/or applications, and then follow the on-screen instructions. If you want to recover the Windows partition to original factory content, you can choose the System Recovery option from the HP Recovery partition (select products only) or use the HP Recovery media. For more information, see Recovering using HP Recovery Manager on page 49. If you have not already created recovery media, see Creating HP Recovery media (select products only) on page 47. On select products, if you want to recover the computer's original factory partition and content, or if you have replaced the hard drive, you can use the Factory Reset option of HP Recovery media. For more information, see Recovering using HP Recovery Manager on page 49. On select products, if you want to remove the recovery partition to reclaim hard drive space, HP Recovery Manager offers the Remove Recovery Partition option. For more information, see Removing the HP Recovery partition (select products only) on page 52. Recovering using HP Recovery Manager HP Recovery Manager software allows you to recover the computer to its original factory state by using the HP Recovery media that you either created or that you obtained from HP, or by using the HP Recovery partition (select products only). If you have not already created recovery media, see Creating HP Recovery media (select products only) on page 47. What you need to know before you get started HP Recovery Manager recovers only software that was installed at the factory. For software not provided with this computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer. IMPORTANT: Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues. HP Recovery media must be used if the computer hard drive fails. If you have not already created recovery media, see Creating HP Recovery media (select products only) on page 47. To use the Factory Reset option (select products only), you must use HP Recovery media. If you have not already created recovery media, see Creating HP Recovery media (select products only) on page 47. If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP Restore and recovery 49 website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before beginning recovery, back up any personal data you want to retain. Using HP Recovery media, you can choose from one of the following recovery options:

NOTE: Only the options available for your computer display when you start the recovery process. System RecoveryReinstalls the original operating system, and then configures the settings for the programs that were installed at the factory. Factory ResetRestores the computer to its original factory state by deleting all information from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that was installed at the factory. The HP Recovery partition (select products only) allows System Recovery only. Using the HP Recovery partition (select products only) The HP Recovery partition allows you to perform a system recovery without the need for recovery discs or a recovery USB flash drive. This type of recovery can be used only if the hard drive is still working. To start HP Recovery Manager from the HP Recovery partition:

IMPORTANT:

beginning these steps (select products only). For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before 1. Type recovery in the taskbar search box, select Recovery Manager, and then select HP Recovery Environment.

- or-

For computers or tablets with keyboards attached, press f11 while the computer boots, or press and hold f11 as you press the power button. For tablets without keyboards:

Turn on or restart the tablet, and then quickly hold down the volume up button; then select f11.

- or -

Turn on or restart the tablet, and then quickly hold down the volume down button; then select f11.

- or -

Turn on or restart the tablet, and then quickly hold down the Windows button; then select f11. 2. 3. Select Troubleshoot from the boot options menu. Select Recovery Manager, and then follow the on-screen instructions. Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly. 50 Chapter 11 Backing up, restoring, and recovering 1. 2. If possible, back up all personal files. Insert the HP Recovery media, and then restart the computer. NOTE:

boot order. See Changing the computer boot order on page 51. If the computer does not automatically restart in HP Recovery Manager, change the computer 3. Follow the on-screen instructions. Changing the computer boot order If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection to an optical drive or a USB flash drive. To change the boot order:

IMPORTANT:

beginning these steps. For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before 1. 2. Insert the HP Recovery media. Access the system Startup menu. For computers or tablets with keyboards attached:

Turn on or restart the computer or tablet, quickly press esc, and then press f9 for boot options. For tablets without keyboards:

Turn on or restart the tablet, and then quickly hold down the volume up button; then select f9.

- or -

Turn on or restart the tablet, and then quickly hold down the volume down button; then select f9.

- or -

Turn on or restart the tablet, and then quickly hold down the Windows button; then select f9. 3. 4. Select the optical drive or USB flash drive from which you want to boot. Follow the on-screen instructions. Restore and recovery 51 Removing the HP Recovery partition (select products only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery or create HP recovery media from the HP Recovery partition. So before you remove the Recovery partition, create HP Recovery media; see Creating HP Recovery media (select products only) on page 47. NOTE: The Remove Recovery Partition option is only available on products that support this function. Follow these steps to remove the HP Recovery partition:

1. 2. Type recovery in the taskbar search box, and then select HP Recovery Manager. Select Remove Recovery Partition, and then follow the on-screen instructions. 52 Chapter 11 Backing up, restoring, and recovering 12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100240 V, 5060 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source that is supplied and approved by HP for use with this computer. The computer can operate on DC power within the following specifications. Operating voltage and current varies by platform. The voltage and current for your computer is located on the regulatory label. Input power Rating Operating voltage and current 5 V dc @ 2 A / 12 V dc @ 3 A /15 V dc @ 3 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 3.75 A / 12 V dc @ 3.75 A / 15 V dc @ 3 A / 20 V dc @ 2.25 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc @ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc @ 5 A / 20 V dc @ 4.5 A 90 W USB-C 19.5 V dc @ 2.31 A 45 W 19.5 V dc @ 3.33 A 65 W 19.5 V dc @ 4.62 A 90 W 19.5 V dc @ 6.15 A 120 W 19.5 V dc @ 7.70 A 150 W 19.5 V dc @ 10.3 A 200 W DC plug of external HP power supply (select products only) NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. Operating environment Factor Temperature Operating Metric U.S. 5C to 35C 41F to 95F Input power 53 Factor Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Metric

-20C to 60C 10% to 90%

5% to 95%

U.S.

-4F to 140F 10% to 90%

5% to 95%

Operating Nonoperating

-15 m to 3,048 m

-15 m to 12,192 m

-50 ft to 10,000 ft

-50 ft to 40,000 ft 54 Chapter 12 Specifications 13 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contactfor example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:

If removal or installation instructions direct you to unplug the computer, first be sure that it is properly grounded. Keep components in their electrostatic-safe containers until you are ready to install them. Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. Use nonmagnetic tools. Before handling components, discharge static electricity by touching an unpainted metal surface. If you remove a component, place it in an electrostatic-safe container. 55 14 Accessibility HP designs, produces, and markets products and services that can be used by everyone, including people with disabilities, either on a stand-alone basis or with appropriate assistive devices. Supported assistive technologies HP products support a wide variety of operating system assistive technologies and can be configured to work with additional assistive technologies. Use the Search feature on your device to locate more information about assistive features. NOTE:

for that product. For additional information about a particular assistive technology product, contact customer support Contacting support We are constantly refining the accessibility of our products and services and welcome feedback from users. If you have an issue with a product or would like to tell us about accessibility features that have helped you, please contact us at +1 (888) 259-5707, Monday through Friday, 6 a.m. to 9 p.m. North American Mountain Time. If you are deaf or hard-of-hearing and use TRS/VRS/WebCapTel, contact us if you require technical support or have accessibility questions by calling +1 (877) 656-7058, Monday through Friday, 6 a.m. to 9 p.m. North American Mountain Time. NOTE: Support is in English only. 56 Chapter 14 Accessibility Index A AC adapter and battery 6 AC adapter, testing 32 accessibility 56 action keys 11 identifying 11 airplane mode 15 airplane mode key 12, 15 antivirus software, using 40 Audio 20 audio-out (headphone)/audio-in

(microphone) jack, identifying 5 B backing up software and information 41 backups 47 battery conserving power 30 discharging 30 factory-sealed 30 finding information 30 low battery levels 30 resolving low battery level 31 battery information, finding 30 battery power 29 best practices 1 BIOS determining version 42 downloading an update 43 starting the Setup Utility 42 updating 42 Bluetooth device 15, 17 Bluetooth label 14 boot order changing 51 bottom 14 buttons left TouchPad 9 power 6 right TouchPad 9 C camera identifying 8 using 19 camera light, identifying 7 caps lock light, identifying 10 caring for your computer 35 cleaning your computer 35 components display 7 front 13 left side 6 right side 5 top 9 connecting to a WLAN 16 connector, power 6 corporate WLAN connection 16 critical battery level 31 D Disk Cleanup software 34 Disk Defragmenter software 34 E electrostatic discharge 55 esc key, identifying 11 external AC power, using 31 F fingerprints, registering 39 firewall software 40 fn key, identifying 11 four-finger tap TouchPad gesture 24 G GPS 17 H HDMI port connecting 20 identifying 5 HDMI, configuring audio 21 headphones, connecting 19 headsets, connecting 20 Hibernation exiting 28 initiated during critical battery level 31 initiating 28 high-definition devices, connecting 20, 22 HP 3D DriveGuard 34 HP Apps Store, visiting 1 HP Fast Charge 29 HP Mobile Broadband activating 16 IMEI number 16 MEID number 16 HP PC Hardware Diagnostics (UEFI) Failure ID code 45 using 45 HP Recovery Manager correcting boot problems 51 starting 50 HP Recovery media creating 47 recovery 50 HP Recovery partition recovery 50 removing 52 HP resources 2 HP Touchpoint Manager 41 I IMEI number 16 initiating Sleep and Hibernation 27 input power 53 installing optional security cable 41 internal microphones, identifying 7 Internet security software, using 39 J jacks audio-out (headphone)/audio-in

(microphone) 5 Index 57 K keyboard and optional mouse using 25 keys action 11 airplane mode 12 esc 11 fn 11 Windows 11 Windows applications 11 L labels Bluetooth 14 regulatory 14 serial number 13 service 13 wireless certification 14 WLAN 14 lights AC adapter and battery light 6 caps lock 10 mute 10 power 7 locating information hardware 4 software 4 low battery level 30 M maintenance Disk Cleanup 34 Disk Defragmenter 34 HP 3D DriveGuard 34 updating programs and drivers 35 managing power 27 MEID number 16 memory card reader, identifying 7 memory card, identifying 7 minimized image recovery 50 minimized image, creating 49 Miracast 22 mobile broadband activating 16 IMEI number 16 MEID number 16 mute light, identifying 10 58 Index O one-finger slide touch screen gesture 25 operating environment 53 original system recovery 49 P passwords Setup Utility (BIOS) 39 Windows 38 ports HDMI 5, 20 Miracast 22 USB 3.0 (powered) charging 5, 6 USB Type-C 5 power AC 31 battery 29 power button, identifying 6 power connector, identifying 6 power lights, identifying 7 power meter, using 29 power settings, using 29 product name and number, computer 13 public WLAN connection 16 R recover options 49 recovery discs 48, 50 HP Recovery Manager 49 media 50 starting 50 supported discs 48 system 49 USB flash drive 50 using HP Recovery media 48 recovery media creating 47 creating using HP Recovery Manager 48 recovery partition removing 52 regulatory information regulatory label 14 wireless certification labels 14 S security cable, installing 41 serial number 13 serial number, computer 13 service labels, locating 13 setting password protection on wakeup 28 Setup Utility (BIOS) passwords 39 shipping the computer 36 shutdown 32 Sleep exiting 28 initiating 28 Sleep and Hibernation initiating 27 slots memory card reader 7 software Disk Cleanup 34 Disk Defragmenter 34 HP 3D DriveGuard 34 software updates, installing 40 sound settings, using 20 speakers connecting 19 identifying 13 supported discs, recovery 48 system recovery 49 system restore point creating 48 system restore point, creating 47 T tap TouchPad and touch screen gesture 23 testing an AC adapter 32 three-finger swipe TouchPad gesture 25 touch screen gestures one-finger slide 25 TouchPad buttons 9 using 23 TouchPad and touch screen gestures tap 23 two-finger pinch zoom 23 TouchPad gestures four-finger tap 24 three-finger swipe 25 two-finger slide 24 two-finger tap 24 TouchPad zone, identifying 9 traveling with the computer 14, 36 turning off the computer 32 two-finger pinch zoom TouchPad and WLAN device 14 WLAN label 14 WWAN device 16 touch screen gesture 23 two-finger slide TouchPad gesture 24 two-finger tap TouchPad gesture 24 U unresponsive system 32 updating programs and drivers 35 USB 3.0 charging (powered) port, identifying 5, 6 USB Type-C port, identifying 5 using external AC power 31 using passwords 38 using power meter settings 29 using power settings 29 using sound settings 20 using the keyboard and optional mouse 25 using the TouchPad 23 V vents, identifying 6 video 20 W Windows system restore point 47, 48 Windows applications key, identifying 11 Windows Hello using 39 Windows key, identifying 11 Windows passwords 38 Windows tools using 48 wireless button 15 wireless certification label 14 wireless controls button 15 operating system 15 wireless light 15 wireless network (WLAN) connecting 16 corporate WLAN connection 16 functional range 16 public WLAN connection 16 wireless network, securing 41 WLAN antennas, identifying 7 Index 59

Contains Intel Radio Model: 7265NGW Contains FCC ID: PD97265NG IC:1000M-7265NG Laptop bottom Label & Location for FCC PD97265NG Label will be placed on shield ZN MAIN AUX Intel Dual Band Wireless-AC 7265 Model: 7265NGW. FCC ID: PD97265NG IC: 1000M-7265NG

Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Date: 07/02/2018 Dear Examiner, Ref: FCC Class II Permissive change for FCC ID: PD97265NG (Original Grant date: 3/21/2014) This is to request a Class II permissive change for FCC ID: PD97265NG, originally granted on 3/21/2014. The major change filed under this application is:

Change #1: This change is to request approval for portable category specific host HP tablet PC, model number: TPN-C138, with antenna WNC part no 81EAA415.GFG (Tx1) and 81EAA415.GFH (Tx2). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. Sincerely, By:

Title:

Steven C. Hackett __________________________ Wireless Regulatory Engineer

(Signature) On behalf of: Intel Mobile Communications Telephone: 803-216-2344 Fax:

803-216-2176 steven.c.hackett@intel.com e-mail:

Intel Mobile Communications 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 USA

FCC ID: PD97265NG, PD97265NGU SoftwareSecurityDescriptionKDB594280D02v01r02SectionII GeneralDescription 1. Describehowanysoftware/firmwareupdatewillbe obtained,downloaded,andinstalled.Softwarethatis accessedthroughmanufacturerswebsiteordevices managementsystem,mustdescribethedifferentlevels ofsecurity. There is no downloadable software provided by the manufacturer that can modify critical radio transmitter parameters. All critical parameters are programmed in OTP memory at the factory and cannot be modified or overridden by third parties. 2. Describealltheradiofrequencyparametersthatare modifiedbyanysoftware/firmwarewithoutany hardwarechanges.Aretheseparametersinsomeway limited,suchthat,itwillnotexceedtheauthorized parameters?

3. Describeindetailtheauthenticationprotocolsthat areinplacetoensurethatthesourceofthe software/firmwareislegitimate.Describeindetailhow thesoftwareisprotectedagainstmodification. There are no rf parameters that can be modified. All rf parameters are programmed in OTP memory at the factory and cannot be modified or overridden by third parties. The firmware is programmed at the factory and cannot be modified by third parties. 4. Describeindetailtheverificationprotocolsinplace toensurethatinstalledsoftware/firmwareislegitimate. The firmware is programmed at the factory and cannot be modified by third parties. 5. Describeindetailanyencryptionmethodsusedto supporttheuseoflegitimatesoftware/firmware. The firmware is programmed at the factory and cannot be modified by third parties therefore no encryption is necessary. 6. Foradevicethatcanbeconfiguredasamasterand client(withactiveorpassivescanning),explainhowthe deviceensurescomplianceforeachmode?Inparticular ifthedeviceactsasmasterinsomebandofoperation andclientinanother;howiscomplianceensuredin eachbandofoperation?

This is a client module only. ThirdPartyAccessControl 1. Explainifanythirdpartieshavethecapabilityto operateaUSsolddeviceonanyotherregulatory domain,frequencies,orinanymannerthatisin violationofthecertification. 2. WhatpreventsthirdpartiesfromloadingnonUS versionsofthesoftware/firmwareonthedevice?

Describeindetailhowthedeviceisprotectedfrom flashingandtheinstallationofthirdpartyfirmware suchasDDWRT.(See,forexample,http://www.dd Third parties do not the capability to operate in any manner that is violation of the certification in the U.S. RF parameters are programmed into OTP memory at the factory and cannot be reprogrammed or re-flashed by third parties. wrt.com/) 3. ForCertifiedTransmittermodulardevices,describe howthemodulegranteeensuresthathosts manufacturesfullycomplywiththesesoftwaresecurity requirementsforUNIIdevices.Ifthemoduleis controlledthroughdriversoftwareloadedinthehost, describehowthedriversarecontrolledandmanaged suchthatthemodulartransmitterparametersarenot modifiedoutsidethegrantofauthorization. FCC ID: PD97265NG, PD97265NGU There are no rf parameters that can be modified. All rf parameters are programmed in OTP memory at the factory and cannot be modified or overridden by third parties. The module is not controlled by driver software on the host and cannot override critical rf parameters stored in module OTP memory. SOFTWARECONFIGURATIONDESCRIPTIONKDB594280D02v01r02SectionIII USERCONFIGURATIONGUIDE 1. TowhomistheUIaccessible?(Professionalinstaller, enduser,other.) No UI provided. a) Whatparametersareviewabletotheprofessional None installer/enduser?

b) Whatparametersareaccessibleormodifiableto None theprofessionalinstaller?

i) Aretheparametersinsomewaylimited,sothat theinstallerswillnotenterparametersthatexceed thoseauthorized?

The module micro-code reads the parameters from the module OTP memory. These parameters cannot be modified or overridden by sw drivers. ii) Whatcontrolsexistthattheusercannotoperate thedeviceoutsideitsauthorizationintheU.S.?

Default mode is always FCC compliant. Other country modes cannot be activated without receiving three independent country codes from different APs, otherwise remains in FCC default mode (always FCC compliant) c) Whatconfigurationoptionsareavailabletothe None enduser?

i) Aretheparametersinsomewaylimited,sothat theinstallerswillnotenterparametersthatexceed thoseauthorized?

The module micro-code reads the parameters from the module OTP memory. These parameters cannot be modified or overridden by sw drivers. ii) Whatcontrolsexistthattheusercannotoperate thedeviceoutsideitsauthorizationintheU.S.?

Default mode is always FCC compliant. Other country modes cannot be activated without receiving three independent country codes from different APs, otherwise remains in FCC default mode (always FCC compliant) d) Isthecountrycodefactoryset?Canitbechanged intheUI?

Default country code is set in the factory and no UI is provided for modification. i) Ifso,whatcontrolsexisttoensurethatthe devicecanonlyoperatewithinitsauthorizationinthe Programmed for default mode which is always FCC compliant. Always set for default for all start-ups, resets, timeouts or other host or network events. FCC ID: PD97265NG, PD97265NGU U.S.?

isrestarted?

e) Whatarethedefaultparameterswhenthedevice Always FCC compliant 2. Cantheradiobeconfiguredinbridgeormeshmode?

Ifyes,anattestationmayberequired.Further informationisavailableinKDBPublication905462D02. No 3. Foradevicethatcanbeconfiguredasamasterand client(withactiveorpassivescanning),ifthisisuser configurable,describewhatcontrolsexist,withintheUI, toensurecomplianceforeachmode.Ifthedeviceacts asamasterinsomebandsandclientinothers,howis thisconfiguredtoensurecompliance?

4. Foradevicethatcanbeconfiguredasdifferenttypes ofaccesspoints,suchaspointtopointorpointto multipoint,andusedifferenttypesofantennas, describewhatcontrolsexisttoensurecompliancewith applicablelimitsandtheproperantennaisusedfor eachmodeofoperation.(SeeSection15.407(a)) This is a client device. This device is not an access point. Name and surname of applicant (or authorized representative):

Date: May 11, 2015 Signature:

Authority to Act as Agent Date: 04/16/2018 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

RF Exposure Lab is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. This authorization is applicable to the product:

FCC ID: PD97265NG & PD97265NGU Agency Agreement Expiration Date: 04/16/2019 Sincerely, By:

Steven C. Hackett __________________________

(Signature) Title:

Wireless Regulatory Engineer On behalf of: Intel Mobile Communications Telephone:

Fax:

e-mail:

803-216-2344 803-216-2176 steven.c.hackett@intel.com Intel Mobile Communications 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 USA

Request for Confidentiality Date: 07/02/2018 held confidential. Subject: Confidentiality Request for FCC ID: PD97265NG Pursuant to FCC 47 CRF 0.457(d) the applicant requests that a part of the subject FCC application be Type of Confidentiality Requested Exhibit Type of exhibit Short Term Permanent Regulatory WLAN antenna information Operation Description/Theory of Operation Short Term Short Term Test Setup Photos Users manual of the host device Test Setup Photos Users Manual Intel Mobile Communications has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition"

would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ATCB in the event information regarding the product or the product is made available to the public. ATCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

Steven C. Hackett __________________________

(Signature) Title:

On behalf of:

Telephone:

Fax:

e-mail:

Wireless Regulatory Engineer Intel Mobile Communications 803-216-2344 803-216-2176 steven.c.hackett@intel.com Intel Mobile Communications 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 USA

1.2. Operational Description Report No.: 14A0411R-RFUSP25V00 The EUT is an Intel Dual Band Wireless-AC 7265 with a built-in 2.4GHz and 5GHz WLAN transceiver. This device provided four kinds of transmitting speed 1, 2, 5.5 and 11Mbps and the device of RF carrier is DBPSK, DQPSK and CCK (IEEE 802.11b). The device provided of eight kinds of transmitting speed 6, 9, 12, 18, 24, 36, 48 and 54Mbps the device of RF carrier is BPSK, QPSK, 16QAM and 64QAM (IEEE 802.11a/g). The device provided of eight kinds of transmitting speed 14.4,28.9,43.3,57.8,86.7,115.6,130 and 144.4Mbps in 802.11n(20M-BW) mode and 30,60,90,120,180,240,270 and 300 Mbps(40M-BW) and 65,130,195,260,390,520,585,650,7800 and 866.7Mbps in 802.11ac(80BW) mode the device of RF carrier is BPSK, QPSK, 16QAM, 64QAM and 256 QAM (IEEE 802.11n/ac), the IEEE 802.11n is Multiple In, Multiple Out (MIMO) technology. The device adapts direct sequence spread spectrum modulation. The antenna provides diversity function to improve the receiving function and the antennas to support 2(Transmit) 2(Receive) MIMO technology. This Intel Dual Band Wireless-AC 7265, compliant with IEEE 802.11a/b/g/n/ac, is a high-efficiency Wireless LAN adapter. It allows your computer to connect to a wireless network and to share resources, such as files or printers without being bound to the network wires. Operation in 2.4GHz Direst Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing

(OFDM) radio transmission, the Intel Dual Band Wireless-AC 7265 Wired Equivalent Protection

(WEP) algorithm is used. In addition, its standard compliance ensures that it can communicate with any IEEE 802.11a/b/g/n/ac network. This equipment includes WLAN, Bluetooth module, which can transmit signals simultaneously. Page: 7 of 189