FCC ID: PD9AX101D2 Intel Wi-Fi 6 AX101

 

 

 

 

 

Intel(R) WiFi Adapter Information Guide Intel WiFi Adapter Information Guide This version of Intel PROSet/Wireless WiFi Software is compatible with the adapters listed below. Note that newer features provided in this software are generally not supported on older generations of wireless adapters. The following adapters are supported in Windows* 10:

Intel Wi-Fi 6E AX411 Intel Wi-Fi 6E AX211 Intel Wi-Fi 6E AX210 Intel Wi-Fi 6 AX204 Intel Wi-Fi 6 AX203 Intel Wi-Fi 6 AX201 Intel Wi-Fi 6 AX200 Intel Wi-Fi 6 AX101 Intel Wireless-AC 9560 Intel Wireless-AC 9462 Intel Wireless-AC 9461 Intel Wireless-AC 9260 Intel Dual Band Wireless-AC 8265 Intel Dual Band Wireless-AC 8260 Intel Dual Band Wireless-AC 3168 Intel Dual Band Wireless-AC 7265 Intel Dual Band Wireless-N 7265 Intel Wireless-N 7265 Intel Dual Band Wireless-AC 3165 With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internet connection. All these features can be explored using a WiFi network in your home or office. This WiFi network solution is designed for both home and business use. Additional users and features can be added as your networking needs grow and change. This guide contains basic information about Intel adapters. Intel wireless adapters enable fast connectivity without wires for desktop and notebook PCs. Adapter Settings Regulatory and Safety Information Specifications Support Warranty Depending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac and 802.11ax wireless standards. Operating at 5GHz or 2.4GHz frequency, you can now connect your computer to existing high-speed networks that use multiple access points within large or small environments. Your WiFi adapter maintains automatic data rate control according to the access point location and signal strength to achieve the fastest possible connection. Information in this document is subject to change without notice. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein. IMPORTANT NOTICE FOR ALL USERS OR DISTRIBUTORS:

Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all necessary local and governmental regulatory agency requirements for the regions that they are designated and/or marked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars, satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, and limit usage to avoid interference with these devices. In many instances Intel is required to provide test data to prove index.htm[8/25/2022 4:59:17 PM]

Intel(R) WiFi Adapter Information Guide regional and local compliance to regional and governmental regulations before certification or approval to use the product is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully control parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include, without limitation, RF power, spectrum usage, channel scanning, and human exposure. For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format with the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, or code with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches, utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will be solely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under any theory of liability for any issues associated with the modified products, including without limitation, claims under the warranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assist in providing support to any third parties for such modified products. Note: Many regulatory agencies consider Wireless LAN adapters to be "modules", and accordingly, condition system-

level regulatory approval upon receipt and review of test data documenting that the antennas and system configuration do not cause the EMC and radio operation to be non-compliant. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others. Intel Corporation. February 2022 index.htm[8/25/2022 4:59:17 PM]

Adapter Settings Back to Contents Adapter Settings The Advanced tab displays the device properties for the WiFi adapter installed on your computer. How to Access Double-click on the Intel WiFi adapter in the Network adapters section of the Device Manager and select the Advanced tab. A description of the WiFi adapter settings on the Advanced tab can be found here:

https://www.intel.com/content/www/us/en/support/articles/000005585/network-and-i-o/wireless-networking.html Back to Top Back to Contents Trademarks and Disclaimers adaptusr.htm[8/25/2022 4:59:18 PM]

Regulatory Information Back to Contents Regulatory Information This section provides regulatory information for the following wireless adapters:

Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel Centrino Wireless-N 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 Intel Dual Band Wireless-AC 7260 Intel Dual Band Wireless-N 7260 Intel Wireless-N 7260 Intel Dual Band Wireless-AC 3160 Intel Dual Band Wireless-AC 3165 Intel Dual Band Wireless-AC 3168 Intel Dual Band Wireless-AC 7265 Intel Dual Band Wireless-N 7265 Intel Wireless-N 7265 Intel Dual Band Wireless-AC 8260 Intel Dual Band Wireless-AC 8265 Intel Wireless-AC 9260 Intel Wireless-AC 9461 Intel Wireless-AC 9462 Intel Wireless-AC 9560 Intel Tri-Band Wireless-AC 17265 Intel Tri-Band Wireless-AC 18260 Intel Tri-Band Wireless-AC 18265 Intel Wireless Gigabit Sink W13100 Intel Wireless Gigabit 11000 Intel Wireless Gigabit Sink W13110VR Intel Wireless Gigabit 11100VR Intel Wi-Fi 6 AX101 Intel Wi-Fi 6 AX200 Intel Wi-Fi 6 AX201 Intel Wi-Fi 6 AX203 Intel Wi-Fi 6 AX204 Intel Wi-Fi 6E AX210 Intel Wi-Fi 6E AX211 Intel Wi-Fi 6E AX411 NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 and similar standards), the information provided herein is subject to change. Intel Corporation assumes no responsibility for errors or omissions in this document. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Intel WiFi/WiMAX Wireless Adapters Information in this section supports the following wireless adapters:

Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N + WiMAX 6250 See Specifications for complete wireless adapter specifications. NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above. The following information is provided:

Information for the User Regulatory Information Regulatory ID Information for OEMs and Host Integrators INFORMATION FOR THE USER Safety Notices USA FCC Radio Frequency Exposure The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure requirements found in FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:

Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. Use in specific environments:

The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of electronic devices equipped with wireless adapters on airplanes is governed by rules for each commercial airline operator. The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use. Antenna Warnings Warning: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic devices equipped with radio-frequency wireless devices

(wireless adapters) because their signals could interfere with critical aircraft instruments. Caution: 60 GHz/802.11ad equipment is not permitted on aircraft per FCC 15.255. OEM and host integrators should consider this FCC rule in host devices. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network. Local Restrictions on 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e Radio Usage Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The device transmit power control (TPC) interface is part of the Intel PROSet/Wireless WiFi Connection Utility Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. Wireless Interoperability The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:

IEEE Std. 802.11b compliant Standard on Wireless LAN IEEE Std. 802.11g compliant Standard on Wireless LAN IEEE Std. 802.11a compliant Standard on Wireless LAN IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN IEEE 802.16e-2005 Wave 2 compliant Wireless Fidelity certification, as defined by the Wi-Fi Alliance WiMAX certification as defined by the WiMAX Forum The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

Using the wireless adapter on board airplanes, or Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. REGULATORY INFORMATION USA - Federal Communications Commission (FCC) No configuration controls are provided for Intel wireless adapters allowing any change in the frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC rules. Intel wireless adapters are intended for OEM integrators only. Intel wireless adapters cannot be co-located with any other transmitter unless approved by the FCC. This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Class B Device Interference Statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception

(which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Safety Approval Considerations This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:

It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd edition including the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure). The device shall be supplied by a SELV source when installed in the end-use equipment. A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 60950-1 2nd edition. Low Halogen Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB / substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment. Japan 5GHz Korea

. 5150-5250MHz . Mexico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Taiwan Regulatory Information Radio Approvals To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document. Modular Regulatory Certification Country Markings A list of countries requiring regulatory markings is available. Note that the lists include only countries requiring marking but not all certified countries. To find the regulatory country marking information for your adapter, perform these steps:

1. Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html 2. Click on the link for your adapter. 3. Click on Regulatory Marking Document for your adapter. INFORMATION FOR OEMs and HOST INTEGRATORS The guidelines described within this document are provided to OEM integrators installing Intel wireless adapters in notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of compliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described herein are fulfilled the Intel wireless adapters may be incorporated into notebook and tablet PC host platforms with no further restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM or integrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible to determine the required host regulatory testing and/or obtaining the required host approvals for compliance. Intel wireless adapters are intended for OEMs and host integrators only. The Intel wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval. The Intel wireless adapters must be operated with an access point that has been approved for the country of operation. Changes or modification to Intel wireless adapters by OEMs, integrators or other third parties is not permitted. Any changes or modification to Intel wireless adapters by OEMs, integrators or other third parties will void authorization to operate the adapter. Antenna Type and Gains Only antennas of the same type and with equal or less gains as 3dBi for the 2.4GHz band and 5dBi for the 5GHz band shall be used with the Intel wireless adapters. Other types of antennas and/or higher gain antennas may require additional authorization for operation. For testing purposes the following dual band antenna that approximates closely the above limits was used:

Antenna Type PIFA Antenna Location

(Main/Aux) 2.4GHz Peak Gain in dBi*

5.2GHz Peak Gain in dBi*

5.5GHz Peak Gain in dBi*

5.7GHz Peak Gain in dBi*

Main Aux MIMO 3.24 3.73 4.77 4.77

*All antenna gains include cable loss. Antenna Placement Within the Host Platform To ensure RF exposure compliance the antenna(s) used with the Intel wireless adapters must be installed in notebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operating modes and orientations of the host platform, with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the antenna when installed in the host system. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Intel Wireless Adapter Minimum required antenna-to-user separation distance Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Wireless-N + WiMAX 6350 18 mm 17 mm Simultaneous Transmission of Intel Wireless Adapters with Other Integrated or Plug-In Transmitters Based upon FCC Knowledge Database publication number 616217 when there are multiple transmitting devices installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements. OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessment to determine if any additional requirements for testing or FCC approval is necessary. Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label. The Intel wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines. China:

Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11e Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. Intel WiFi Adapters - 802.11n, 802.11ac and 802.11ax Compliant The information in this section applies to the following products:

Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel Centrino Wireless-N 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Intel Centrino Advanced-N 6235 Intel Centrino Ultimate-N 6300 Intel Dual Band Wireless-AC 7260 Intel Dual Band Wireless-N 7260 Intel Wireless-N 7260 Intel Dual Band Wireless-AC 3160 Intel Dual Band Wireless-AC 3165 Intel Dual Band Wireless-AC 3168 Intel Dual Band Wireless-AC 7265 Intel Dual Band Wireless-N 7265 Intel Wireless-N 7265 Intel Dual Band Wireless-AC 8260 Intel Dual Band Wireless-AC 8265 Intel Wireless-AC 9260 Intel Wireless-AC 9461 Intel Wireless-AC 9462 Intel Wireless-AC 9560 Intel Tri-Band Wireless-AC 17265 Intel Tri-Band Wireless-AC 18260 Intel Tri-Band Wireless-AC 18265 Intel Wireless Gigabit Sink W13100 Intel Wireless Gigabit 11000 Intel Wireless Gigabit Sink W13110VR Intel Wireless Gigabit 11100VR Intel Wi-Fi 6 AX101 Intel Wi-Fi 6 AX200 Intel Wi-Fi 6 AX201 Intel Wi-Fi 6 AX203 Intel Wi-Fi 6 AX204 Intel Wi-Fi 6E AX210 Intel Wi-Fi 6E AX211 Intel Wi-Fi 6E AX411 See Specifications for complete wireless adapter specifications. NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above. The following information is provided:

Information for the User Regulatory Information Regulatory ID Information for OEMs and Host Integrators Statements of European Compliance INFORMATION FOR THE USER Safety Notices USA FCC Radio Frequency Exposure The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure requirements found in FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. Use in specific environments:

The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use. Antenna Warnings Warning: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic devices equipped with radio-frequency wireless devices

(wireless adapters) because their signals could interfere with critical aircraft instruments. Caution: 60 GHz/802.11ad equipment is not permitted on aircraft per FCC 15.255. OEM and host integrators should consider this FCC rule in host devices. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other devices in the wireless network. Local Restrictions on 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac Radio Usage Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The device transmit power control (TPC) interface is part of the Intel PROSet/Wireless WiFi Connection Utility Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. Wireless Interoperability The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:

IEEE Std. 802.11b compliant Standard on Wireless LAN IEEE Std. 802.11g compliant Standard on Wireless LAN IEEE Std. 802.11a compliant Standard on Wireless LAN IEEE Std. 802.11n compliant Standard on Wireless LAN IEEE Std. 802.11ac draft compliant on Wireless LAN Wireless Fidelity certification, as defined by the Wi-Fi Alliance The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

Using the wireless adapter on board airplanes, or Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. REGULATORY INFORMATION USA - Federal Communications Commission (FCC) This wireless adapter is restricted to indoor use due to its operation in the 5.85 to 5.895 and 5.925 to 7.125GHz frequency ranges. No configuration controls are provided for Intel wireless adapters allowing any change in the frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC rules. Intel wireless adapters are intended for OEM integrators only. Intel wireless adapters cannot be co-located with any other transmitter unless approved by the FCC. This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. NOTE: The radiated output power of the adapter is far below the FCC radio frequency exposure limits. Nevertheless, the adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20cm between you (or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device. Class B Device Interference Statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception

(which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Safety Approval Considerations This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:

It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd edition including the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure). regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information The device shall be supplied by a SELV source when installed in the end-use equipment. A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 60950-1 2nd edition. Low Halogen Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB / substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment. Canada Industry Canada (IC) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil se conforme aux normes Canada d'Industrie de RSS permis-exempt. L'utilisation est assujetti aux deux conditions suivantes: (1) cet appareil ne peut pas causer d'interfrences, et (2) cet appareil doit accepter des interfrences , y compris des interfrences qui peuvent causer desoprations non dsires de l'appareil. Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15GHz to 5.25GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85GHz frequency range in point-to-point operation. To comply with RF exposure requirements all antennas should be located at a minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body of all persons. Attention: l'utilisation d'un rseau sans fil IEEE802.11a est restreinte une utilisation en intrieur cause du fonctionnement dans la bande de frquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit utilis l'intrieur des btiments pour la bande de frquence 5.15-5.25 GHz afin de rduire les possibilits d'interfrences nuisibles aux canaux co-existants des systmes de transmission satellites. Les radars de puissances ont fait l'objet d'une allocation primaire de frquences dans les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent crer des interfrences avec ce produit et/ou lui tre nuisible. Le gain d'antenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin d'tre conforme aux limites de puissance isotropique rayonne quivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement point--point. Pour se conformer aux conditions d'exposition de RF toutes les antennes devraient tre localises une distance minimum de 20 cm, ou la distance de sparation minimum permise par l'approbation du module, du corps de toutes les personnes. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication. Selon les rglements de Canada d'Industrie, cet metteur de radio peut seulement fonctionner en utilisant une antenne du type et de gain maximum (ou moindre) que le gain approuv pour l'metteur par Canada d'Industrie. Pour rduire lesinterfrences radio potentielles avec les autres utilisateurs, le type d'antenne et son gain devraient tre choisis de faon ce que la puissance isotrope rayonne quivalente(P.I.R.E.) ne soit pas suprieure celle qui est ncessaire pour une communication russie. European Union The low band 5.15 - 5.35GHz is for indoor use only. The 6E band 5.925 - 6.425GHz is for Low Power in-door (LPI) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information This equipment complies with the essential requirements of the European Union directive 2014/53/EU. See Statements of European Union Compliance. European Union Declarations of Conformity To view the European Union Declaration of Conformity for your adapter, perform these steps. 1. Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html 2. Click on "User Guide."

3. Scroll to your adapter. To view additional regulatory information for your adapter, perform these steps:

1. Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html 2. Click on the link for your adapter. 3. Click on Regulatory Marking Document for your adapter. Waste Electrical and Electronic Equipment Directive (WEEE) Restriction of Hazardous Substances Directive (RoHS) Compliant All products described herein are compliant with the European Union's RoHS Directive. For CE Mark-Related Questions related to the wireless adapter, contact:

Intel Corporation Attn: Corporate Quality 2200 Mission College Blvd. Santa Clara, CA 95054-1549 USA Japan 5GHz Korea

. 5150-5250MHz . regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Mexico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Morocco The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities:

Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant,Taza. The operation of this product in the radio channels 4, 5, 6 et 7 (2425 - 2442 MHz) is not authorized in the following cities:

Aroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Bni Hafida, Cabo Negro, Casablanca, Fs, Lakbab, Marrakech, Merchich, Mohammdia, Rabat, Sal, Tanger, Tan Tan, Taounate, Tit Mellil, Zag. Pakistan

"PTA APPROVED MODEL"

Taiwan Singapore Radio Approvals To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document. Modular Regulatory Certification Country Markings A list of countries requiring regulatory markings is available. Note that the lists include only countries requiring marking but not all certified countries. To find the regulatory country marking information for your adapter, perform these steps:

1. Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information 2. Click on the link for your adapter. 3. Click on Regulatory Marking Document for your adapter. Regulatory ID Europe: Models 3160HMW, 3160NGW, 3160SDW, 3165NGW, 7260SDW, 7260NGW, 7260HMW, 7265D2W, 7265NGW, 8260D2W, 8260NGW, 8260NGWH, 18260NGW Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions (WiFi/BT) Intel Wireless Dock Manager 3.x and previous versions (WiGig) Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode

(2400 - 2483.5 MHz) Bluetooth/BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver. Not supported by the models: 3160HMW, 3160NGW, 3160SDW, 3165NGW, 7265D2W, 7265NGW

(57 - 64 GHz) IEEE802.11 ad mode 25 dBm EIRP max This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Intel Dual Band Wireless-AC 3165 Due to the very small size of the 3165D2W/3165NGW (12x16), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 3165D2W FCC ID: PD93165D2 Canada:

Model 3165D2W IC: 1000M-3165D2 Japan:

Model 3165D2W regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information RF: 003-150155 TEL: D150112003 Model 3165NGW RF: 003-150009 TEL: D150008003 Korea:

Model 3165D2W MSIP-CRM-INT-3165D2W Taiwan:

Model 3165D2W China:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 3165D2W CMIIT ID: 2015AJ3466 (M) Europe:

Model 3165D2W Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode

(2400 - 2483.5 MHz) Bluetooth/BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 3165D2W Singapore:

Model 3165D2W Argentina:

Model 3165D2W regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 3165NGW Intel Dual Band Wireless-AC 3168 Due to the very small size of the 3168NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. Japan:

Model 3168NGW RF: 003-160024 TEL: D160013003 Europe:

Model 3168NGW Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode

(2400 - 2483.5 MHz) Bluetooth/BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Argentina:

Model 3168NGW Intel Dual Band Wireless-AC 7265 Due to the very small size of the 7265D2W/7265NGW (12x16), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 7265D2W FCC ID: PD97265D2 Canada:

Model 7265D2W IC: 1000M-7265D2 Japan:

Model 7265D2W RF: 003-140134 TEL: D140087003 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 7265NGW RF: 003-140018 TEL: D140017003 Korea:

Model 7265D2W MSIP-CRM-INT-7265D2W Taiwan:

Model 7265D2W China:

Model 7265D2W CMIIT ID: 2014AJ3467 (M) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Australia:

Model 7265D2W Argentina:

Model 7265D2W Intel Wireless Gigabit Sink W13100 Due to the very small size of the 13100NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. Europe:

Model 13100NGW Software Version Intel Wireless Dock Manager 3.x and previous versions Maximum Power Output

(57 - 64 GHz) IEEE802.11 ad mode 25 dBm EIRP max This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Singapore:

Model 13100NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Intel Tri-Band Wireless-AC 17265 Due to the very small size of the 17265NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. Europe:

Model 17265NGW Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions (WiFi/BT) Intel Wireless Dock Manager 3.x and previous versions (WiGig) Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(57 - 64 GHz) IEEE802.11 ad mode 25 dBm EIRP max This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Singapore:

Model 17265NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Intel Dual Band Wireless-AC 8260 Due to the very small size of the 8260D2W (12x16), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA: Model 8260D2W, FCC ID: PD98260D2 (FCC ID without suffix "U" denotes factory installation only);

FCC ID: PD98260D2U (FCC ID with suffix U denotes user installation or replacement permitted and supported by bios locking feature) Canada:

Model 8260D2W IC: 1000M-8260D2 Japan:

Model 8260D2W RF: 003-150094 TEL: D150070003 Korea:

Model 8260D2W MSIP-CRM-INT-8260D2W Taiwan:

Model 8260D2W regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information China:

Model 8260D2W CMIIT ID: 2014AJ3467 (M) Australia:

Model 8260D2W Argentina:

Model 8260D2W Due to the very small size of the 8260NGWH/8260NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. Japan:

Model 8260NGW RF: 003-150093 TEL: D150069003 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 8260NGWH RF: 003-150154 TEL: D150111003 Argentina:

Model 8260NGWH Argentina:

Model 8260NGW Intel Dual Band Wireless-AC 8265 Due to the very small size of the 8265NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 8265NGW FCC ID: PD98265NG (FCC ID without suffix "U" denotes factory installation only) FCC ID: PD98265NGU (FCC ID with suffix U denotes user installation or replacement permitted and supported by BIOS locking feature) Canada:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 8265NGW IC: 1000M-8265NG Japan:

Model 8265NGW RF 003-160104 TEL D160055003 Korea:

Model 8265NGW MSIP-CRM-INT-8265NGW Taiwan:

Model 8265NGW China:

Model 8265NGW Europe:

Model 8265NGW/8265D2W Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(57 - 64 GHz) IEEE802.11 ad mode 25 dBm EIRP max This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 8265NGW Brazil:

Model 8265NGW 03877-16-02198 Argentina:

Model 8265NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Singapore:

Model 8265NGW Pakistan:

Model 8265NGW

"PTA APPROVED MODEL"

Due to the very small size of the 8265D2W (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 8265D2W FCC ID: PD98265D2 Canada:

Model 8265D2W IC: 1000M-8265D2 Japan:

Model 8265D2W RF 003-160129 TEL D160076003 Korea:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 8265D2W MSIP-CRM-INT-8265D2W Taiwan:

Model 8265D2W China:

Model 8265D2W Australia:

Model 8265D2W Brazil:

Model 8265D2W 03878-16-02198 Argentina:

Model 8265D2W regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Singapore:

Model 8265D2W Pakistan:

Model 8265D2W

"PTA APPROVED MODEL"

Intel Wireless-AC 9260 (9260NGW) Due to the very small size of the 9260NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9260NGW FCC ID: PD99260NG Canada:

Model 9260NGW IC: 1000M-9260NG Japan:

Model 9260NGW RF 003-170125 TEL D170079003 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Korea:

Model 9260NGW MSIP-CRM-INT-9260NGW Taiwan:

Model 9260NGW China:

Model 9260NGW Europe:

Model 9260NGW Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9260NGW Singapore:

Model 9260NGW Intel Wireless-AC 9260 (9260D2WL) Due to the very small size of the 9260D2WL (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9260D2WL FCC ID: PD99260D2L Canada:

Model 9260D2WL IC: 1000M-9260D2L Japan:

Model 9260D2WL RF: 003-190024 TEL: D190023003 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Europe:

Model 9260D2WL Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9260D2WL Brazil:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 9260D2WL ANATEL: 05831-17-04423 Singapore:

Model 9260D2WL Argentina:

Model 9260D2WL Pakistan:

Model 9260D2WL APPROVED BY PTA: 9.9203/2019 Intel Wireless-AC 9461 (9461NGW) Due to the very small size of the 9461NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9461NGW FCC ID: PD99461NG Canada:

Model 9461NGW IC: 1000M-9461NG Japan:

Model 9461NGW RF 003-170204 TEL D170127003 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Korea:

Model 9461NGW MSIP-CRM-INT-9461NGW Taiwan:

Model 9461NGW China:

Model 9461NGW Europe:

Model 9461NGW Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) 23dBm EIRP max (200mW) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information IEEE802.11 a/n/ac mode The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9461NGW Singapore:

Model 9461NGW Intel Wireless-AC 9461 (9461D2W) Due to the very small size of the 9461D2W (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9461D2W FCC ID: PD99461D2 Canada:

Model 9461D2W IC: 1000M-9461D2 Japan:

Model 9461D2W RF 003-170203 TEL D170126003 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Korea:

Model 9461D2W MSIP-CRM-INT-9461D2W Taiwan:

Model 9461D2W China:

Model 9461D2W Europe:

Model 9461D2W Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9461D2W Singapore:

Model 9461D2W Intel Wireless-AC 9462 (9462NGW) Due to the very small size of the 9462NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9462NGW FCC ID: PD99462NG Canada:

Model 9462NGW IC: 1000M-9462NG Japan:

Model 9462NGW RF 003-170245 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information TEL D170151003 Korea:

Model 9462NGW R-CRM-INT-9462NGW Taiwan:

Model 9462NGW China:

Model 9462NGW Europe:

Model 9462NGW Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth 20dBm EIRP max (100mW) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information

(2400 - 2483.5 MHz) BLE 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9462NGW Singapore:

Model 9462NGW Intel Wireless-AC 9462 (9462D2W) Due to the very small size of the 9462D2W (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9462D2W FCC ID: PD99462D2 Canada:

Model 9462D2W IC: 1000M-9462D2 Japan:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 9462D2W RF 003-170243 TEL D170149003 Korea:

Model 9462D2W R-CRM-INT-9462D2W Taiwan:

Model 9462D2W China:

Model 9462D2W Europe:

Model 9462D2W Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode 20dBm EIRP max (100mW) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Bluetooth

(2400 - 2483.5 MHz) BLE 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9462D2W Singapore:

Model 9462D2W Intel Wireless-AC 9560 (9560NGW) Due to the very small size of the 9560NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9560NGW FCC ID: PD99560NG Canada:

Model 9560NGW IC: 1000M-9560NG Japan:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 9560NGW RF 003-170126 TEL D170080003 Korea:

Model 9560NGW MSIP-CRM-INT-9560NGW Taiwan:

Model 9560NGW Model 9560NGW R China:

Model 9560NGW Europe:

Model 9560NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9560NGW Singapore:

Model 9560NGW Intel Wireless-AC 9560 (9560D2W) Due to the very small size of the 9560D2W (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9560D2W FCC ID: PD99560D2 Canada:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 9560D2W IC: 1000M-9560D2 Japan:

Model 9560D2W RF 003-170244 TEL D170150003 Korea:

Model 9560D2W R-CRM-INT-9560D2W Taiwan:

Model 9560D2W China:

Model 9560D2W Europe:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 9560D2W Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9560D2W Singapore:

Model 9560D2W Intel Wireless-AC 9560 (9560D2WL) Due to the very small size of the 9560D2WL (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 9560D2WL FCC ID: PD99560D2L regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Canada:

Model 9560D2WL IC: 1000M-9560D2L Japan:

Model 9560D2WL RF 003-180060 TEL D180033003 Korea:

Model 9560D2WL R-CRM-INT-9560D2WL Taiwan:

Model 9560D2WL China:

Model 9560D2WL Europe:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 9560D2WL Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 9560D2WL Singapore:

Model 9560D2WL Intel Tri-band Wireless AC 18265 Due to the very small size of the 18265NGW module, the regulatory marking has been placed in this user manual because the product label on the device is considered too small to be readable USA: Model 18265NGW, FCC ID: PD918265NG (This module is for factory installation only) Canada:

Model 18265NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information IC : 1000M-18265NG Japan:

Model 18265NGW Korea:

Model 18265NGW MSIP-CRM-INT-18265NGW Taiwan:

Model 18265NGW China:

Model 18265NGW CMIIT ID: 2016AJ7066 (M) Europe:

Model 18265NGW Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions (WiFi/BT) Intel Wireless Dock Manager 3.x and previous versions (WiGig) Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information

(5725 - 5875 MHz) IEEE802.11 a/n/ac mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(57 - 64 GHz) IEEE802.11 ad mode 25 dBm EIRP max This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 18265NGW Brazil:

Model 18265NGW/18265NGW LC 03022-17-04423 Singapore:

Model 18265NGW Intel Wireless Gigabit 11000 Due to the very small size of the 11000D2W/11000D2W LC, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information USA:

Model 11000D2W/11000D2W LC FCC ID: PD911000D2 Canada:

Model 11000D2W IC: 1000M-11000D2 Japan:

Model 11000D2W Korea:

Model 11000D2W MSIP-CRM-INT-11000D2W Taiwan:

Model 11000D2W Model 11000D2W LC China:

Model 11000D2W CMIIT ID: 2016DJ0267 (M) Model 11000D2W LC CMIIT ID: 2016DJ0268 (M) Europe:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model 11000D2W Software Version Intel Wireless Dock Manager 3.x and previous versions Maximum Power Output

(57 - 64 GHz) IEEE802.11 ad mode 25 dBm EIRP max Australia:

Model 11000D2W Singapore:

Model 11000D2W/11000D2W LC Intel Wireless Gigabit Sink W13110VR Due to the very small size of the 13110NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 13110NGW FCC ID: PD913110NG Canada:

Model 13110NGW IC: 1000M-13110NG Korea:

Model 13110NGW R-CRM-INT-13110NGW Taiwan:

Model 13110NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Europe:

Model 13110NGW Software Version Intel Wireless VR dashboard 4.x Maximum Power Output

(57 - 64 GHz) IEEE802.11 ad mode 25 dBm EIRP max This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Singapore:

Model 13110NGW Intel Wireless Gigabit 11100VR Due to the very small size of the 11100D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model 11100D2W FCC ID: PD911100D2 Canada:

Model 11100D2W IC: 1000M-11100D2 Korea:

Model 11100D2W regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information R-CRM-INT-11100D2W Taiwan:

Model 11100D2W Europe:

Model 11100D2W Software Version Intel Wireless VR Dashboard 4.x Maximum Power Output

(57 - 64 GHz) IEEE802.11 ad mode 26 dBm EIRP max This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model 11100D2W Singapore:

Model 11100D2W Intel Wi-Fi 6 AX101 (AX101NGW) Due to the very small size of the AX101NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information TBD Intel Wi-Fi 6 AX101 (AX101D2W) Due to the very small size of the AX101D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. TBD Intel Wi-Fi 6 AX200 (AX200D2WL) Due to the very small size of the AX200D2WL, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX200D2WL FCC ID: PD9AX200D2L Canada:

Model AX200D2WL IC: 1000M-AX200D2L Japan:

Model AX200D2WL RF: 003-190023 TEL: D190022003 Korea:

Model AX200D2WL regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information R-C-INT-AX200D2WL Taiwan:

Model AX200D2WL China:

Model AX200D2WL CMIIT ID: 2019AJ2493 (M) Europe:

Model AX200D2WL Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX200D2WL regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Brazil:

Model AX200D2WL 04137-19-04423 Singapore:

Model AX200D2WL Argentina:

Model AX200D2WL Pakistan:

Model AX200D2WL APPROVED BY PTA: 9.9202/2019 Intel Wi-Fi 6 AX200 (AX200NGW) Due to the very small size of the AX200NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX200NGW FCC ID: PD9AX200NG regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Canada:

Model AX200NGW IC: 1000M-AX200NG Japan:

Model AX200NGW RF: 003-190022 TEL: D190021003 Korea:

Model AX200NGW R-C-INT-AX200NGW Taiwan:

Model AX200NGW China:

Model AX200NGW CMIIT ID: 2019AJ2274 (M) Europe:

Model AX200NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX200NGW Brazil:

Model AX200NGW 04136-19-04423 Singapore:

Model AX200NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Argentina:

Model AX200NGW Pakistan:

Model AX200NGW APPROVED BY PTA: 9.9211/2019 Intel Wi-Fi 6 AX201 (AX201NGW) Due to the very small size of the AX201NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX201NGW FCC ID: PD9AX201NG Canada:

Model AX201NGW IC: 1000M-AX201NG Japan:

Model AX201NGW RF: 003-180232 TEL: D180131003 Korea:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX201NGW R-C-INT-AX201NGW Taiwan:

Model AX201NGW China:

Model AX201NGW Europe:

Model AX201NGW Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX201NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Brazil:

Model AX201NGW ANATEL: 06970-18-04423 Singapore:

Model AX201NGW Argentina:

Model AX201NGW Pakistan:

Model AX201NGW APPROVED BY PTA: 9.9116/2019 Intel Wi-Fi 6 AX201 (AX201D2W) Due to the very small size of the AX201D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX201D2W FCC ID: PD9AX201D2 Canada:

Model AX201D2W IC: 1000M-AX201D2 Japan:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX201D2W RF: 003-180233 TEL: D180132003 Korea:

Model AX201D2W R-C-INT-AX201D2W Taiwan:

Model AX201D2W China:

Model AX201D2W Europe:

Model AX201D2W Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode 20dBm EIRP max (100mW) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Bluetooth

(2400 - 2483.5 MHz) BLE 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX201D2W Brazil:

Model AX201D2W ANATEL: 07039-18-04423 Singapore:

Model AX201D2W Argentina:

Model AX201D2W Pakistan:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX201D2W APPROVED BY PTA: 9.9115/2019 Intel Wi-Fi 6 AX201 (AX201D2WL) Due to the very small size of the AX201D2WL, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX201D2WL FCC ID: PD9AX201D2L Canada:

Model AX201D2WL IC: 1000M-AX201D2L Japan:

Model AX201D2WL RF: 003-180234 TEL: D180133003 Korea:

Model AX201D2WL R-C-INT-AX201D2WL Taiwan:

Model AX201D2WL regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information China:

Model AX201D2WL Europe:

Model AX201D2WL Software Version Intel PROSet/Wireless WiFi Software 20.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX201D2WL Brazil:

Model AX201D2WL ANATEL: 07271-18-04423 Singapore:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX201D2WL Argentina:

Model AX201D2WL Pakistan:

Model AX201D2WL APPROVED BY PTA: 9.9110/2019 Intel Wi-Fi 6 AX203 (AX203NGW) Due to the very small size of the AX203NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX203NGW FCC ID: PD9AX203NG Canada:

Model AX203NGW IC: 1000M-AX203NG Japan:

Model AX203NGW RF: 003-200294 TEL: D200230003 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Korea:

Model AX203NGW R-C-INT-AX203NGW 1. : INTEL CORPORATION 2. (): ( ) AX203NGW 3. : 2020/11 4. / : INTEL CORPORATION / China, Taiwan Taiwan:

Model AX203NGW China:

Model AX203NGW Europe:

Model AX203NGW Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Australia:

Model AX203NGW Brazil:

Model AX203NGW TBD Singapore:

Model AX203NGW Argentina:

Model AX203NGW C-25825 Pakistan:

Model AX203NGW APPROVED BY PTA: 9.162/2021 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Intel Wi-Fi 6 AX203 (AX203D2W) Due to the very small size of the AX203D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX203D2W FCC ID: PD9AX203D2 Canada:

Model AX203D2W IC: 1000M-AX203D2 Japan:

Model AX203D2W RF: 003-200295 TEL: D200231003 Korea:

Model AX203D2W R-C-INT-AX203D2W 1. : INTEL CORPORATION 2. (): ( ) AX203D2W 3. : 2020/11 4. / : INTEL CORPORATION / China, Taiwan Taiwan:

Model AX203D2W China:

Model AX203D2W regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Europe:

Model AX203D2W Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX203D2W Brazil:

Model AX203D2W TBD Singapore:

Model AX203D2W Argentina:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX203D2W C-25827 Pakistan:

Model AX203D2W APPROVED BY PTA: 9.158/2021 Intel Wi-Fi 6 AX204 (AX204NGW) Due to the very small size of the AX203NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. TBD Intel Wi-Fi 6 AX204 (AX204D2W) Due to the very small size of the AX203D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. TBD Intel Wi-Fi 6E AX210 (AX210NGW) Due to the very small size of the AX210NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX210NGW FCC ID: PD9AX210NG regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Canada:

Model AX210NGW IC: 1000M-AX210NG Japan:

Model AX210NGW RF: 003-200209 TEL: D200188003 5.2 GHz Korea:

Model AX210NGW R-C-INT-AX210NGW 1. : INTEL CORPORATION 2. (): ( ) AX210NGW 3. : 2020/09 4. / : INTEL CORPORATION / China, Taiwan Taiwan:

Model AX210NGW China:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX210NGW Europe:

Model AX210NGW Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(5925 - 6425 MHz) IEEE802.11ax 23 dBm EIRP max (200mW) The band 5.925 - 6.425GHz is for LPI (Low Power in-door) This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX210NGW Brazil:

Model AX210NGW regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information 14242-20-04423 Singapore:

Model AX210NGW Argentina:

Model AX210NGW C-25568 Pakistan:

Model AX210NGW APPROVED BY PTA: 9.1000/2020 Intel Wi-Fi 6E AX210 (AX210D2W) Due to the very small size of the AX210D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX210D2W FCC ID: PD9AX210D2 regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Canada:

Model AX210D2W IC: 1000M-AX210D2 Japan:

Model AX210D2W RF: 003-200255 TEL: D200217003 5.2 GHz Korea:

Model AX210D2W R-C-INT-AX210D2W 1. : INTEL CORPORATION 2. (): ( ) AX210D2W 3. : 2020/11 4. / : INTEL CORPORATION / China, Taiwan Taiwan:

Model AX210D2W China:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX210D2W CMIIT ID: 2020AJ15108(M) Europe:

Model AX210D2W Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(5925 - 6425 MHz) IEEE802.11ax 23 dBm EIRP max (200mW) The band 5.925 - 6.425GHz is for LPI (Low Power in-door) This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX210D2W Brazil:

Model AX210D2W TBD Singapore:

Model AX210D2W regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Argentina:

Model AX210D2W C-25695 Pakistan:

Model AX210D2W APPROVED BY PTA: 9.1311/2020 Intel Wi-Fi 6E AX211 (AX211NGW) Due to the very small size of the AX211NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX211NGW FCC ID: PD9AX211NG Canada:

Model AX211NGW IC: 1000M-AX211NG regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Japan:

Model AX211NGW RF: 003-210035 TEL: D210019003 Korea:

Model AX211NGW R-C-INT-AX211NGW 1. : INTEL CORPORATION 2. (): ( ) AX211NGW 3. : 2020/11 4. / : INTEL CORPORATION / China, Taiwan Taiwan:

Model AX211NGW China:

Model AX211NGW TBD Europe:

Model AX211NGW Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(5925 - 6425 MHz) IEEE802.11ax 23 dBm EIRP max (200mW) The band 5.925 - 6.425GHz is for LPI (Low Power in-door) This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX211NGW Brazil:

Model AX211NGW TBD Singapore:

Model AX211NGW Argentina:

Model AX211NGW TBD Pakistan:

Model AX211NGW TBD Intel Wi-Fi 6E AX211 (AX211D2W) Due to the very small size of the AX211D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information USA:

Model AX211D2W FCC ID: PD9AX211D2 Canada:

Model AX211D2W IC: 1000M-AX211D2 Japan:

Model AX211D2W RF: 003-210037 TEL: D210021003 Korea:

Model AX211D2W R-C-INT-AX211D2W 1. : INTEL CORPORATION 2. (): ( ) AX211D2W 3. : 2020/11 4. / : INTEL CORPORATION / China, Taiwan Taiwan:

Model AX211D2W China:

Model AX211D2W TBD Europe:

Model AX211D2W regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(5925 - 6425 MHz) IEEE802.11ax 23 dBm EIRP max (200mW) The band 5.925 - 6.425GHz is for LPI (Low Power in-door) This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX211D2W Brazil:

Model AX211D2W TBD Singapore:

Model AX211D2W Argentina:

Model AX211D2W TBD regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Pakistan:

Model AX211D2W TBD Intel Wi-Fi 6E AX211 (AX211D2WH) Due to the very small size of the AX211D2WH, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

FCC ID: PD9AX211D2H Canada:

IC: 1000M-AX211D2H Japan:

RF: 003-220071 TEL: D220049003 Korea:

R-C-INT-AX211D2WH 1. : INTEL CORPORATION 2. (): ( ) AX211D2W 3. : 2020/11 4. / : INTEL CORPORATION / China, Taiwan Taiwan:

China:

TBD regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Europe:

Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(5925 - 6425 MHz) IEEE802.11ax 23 dBm EIRP max (200mW) The band 5.925 - 6.425GHz is for LPI (Low Power in-door) This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Brazil:

12073-21-04423 Singapore:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Argentina:

C-27904 Pakistan:

APPROVED BY PTA: 9.805/2022 Intel Wi-Fi 6E AX211 (AX211D2WL) Due to the very small size of the AX211D2WL, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX211D2WL FCC ID: PD9AX211D2L Canada:

Model AX211D2WL IC: 1000M-AX211D2L Japan:

Model AX211D2WL TBD Korea:

Model AX211D2WL TBD Taiwan:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX211D2WL TBD China:

Model AX211D2WL TBD Europe:

Model AX211D2WL Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(5925 - 6425 MHz) IEEE802.11ax 23 dBm EIRP max (200mW) The band 5.925 - 6.425GHz is for LPI (Low Power in-door) This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Australia:

Model AX211D2WL Brazil:

Model AX211D2WL TBD Singapore:

regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Model AX211D2WL Argentina:

Model AX211D2WL C-26123 Pakistan:

Model AX211D2WL TBD Intel Wi-Fi 6E AX411 (AX411NGW) Due to the very small size of the AX411NGW, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX411NGW FCC ID: PD9AX411NG Canada:

Model AX411NGW IC: 1000M-AX411NG Europe:

Model AX411NGW Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth 20dBm EIRP max (100mW) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information

(2400 - 2483.5 MHz) BLE 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(5925 - 6425 MHz) IEEE802.11ax 23 dBm EIRP max (200mW) The band 5.925 - 6.425GHz is for LPI (Low Power in-door) This equipment complies with the essential requirements of the European Union directive 2014/53/EU. Intel Wi-Fi 6E AX411 (AX411E2W) Due to the very small size of the AX411E2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA:

Model AX411E2W FCC ID: PD9AX411E2 Canada:

Model AX411E2W IC: 1000M-AX411E2 Europe:

Model AX411E2W Software Version Intel PROSet/Wireless WiFi Software 22.x and subsequent versions Maximum Power Output

(2400 - 2483.5 MHz) IEEE802.11 b/g/n/ax mode Bluetooth

(2400 - 2483.5 MHz) BLE 20dBm EIRP max (100mW) 10dBm EIRP max (10mW)

(5150 - 5725 MHz) IEEE802.11 a/n/ac/ax mode 23dBm EIRP max (200mW) The low band 5.15 - 5.35 GHz is for indoor use only

(5725 - 5875 MHz) IEEE802.11 a/n/ac/ax mode 13.98 dBm EIRP Max (25mW) For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2 receiver

(5925 - 6425 MHz) IEEE802.11ax 23 dBm EIRP max (200mW) The band 5.925 - 6.425GHz is for LPI (Low Power in-door) regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information This equipment complies with the essential requirements of the European Union directive 2014/53/EU. INFORMATION FOR OEMS and HOST INTEGRATORS The guidelines described within this document are provided to OEM integrators installing Intel wireless adapters in notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of compliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described herein are fulfilled the Intel wireless adapters may be incorporated into notebook and tablet PC host platforms with no further restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM or integrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible to determine the required host regulatory testing and/or obtaining the required host approvals for compliance. If needed, please contact the applicant/grantee

(Intel) regarding detailed information on how to setup the device for any compliance testing that the OEM integrator is responsible per KDB 996369 D04. Intel wireless adapters are intended for OEMs and host integrators only. The Intel wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval. The Intel wireless adapters must be operated with an access point that has been approved for the country of operation. Changes or modification to Intel wireless adapters by OEMs, integrators or other third parties is not permitted. Any changes or modification to Intel wireless adapters by OEMs, integrators or other third parties will void authorization to operate the adapter. Antenna Type and Gains Only antennas of the same type and with equal or less gains as 3dBi for the 2.4GHz band and 5dBi for the 5GHz band shall be used with the Intel wireless adapters. Other types of antennas and/or higher gain antennas may require additional authorization for operation. For testing purposes the following dual band antenna that approximates closely the above limits was used:

Antenna Type Antenna Location

(Main/Aux) PIFA Main/Aux 2.4GHz Peak Gain in dBi*

3.24 Antenna Type and Gains for AX211D2WH Only 5.2GHz Peak Gain in dBi*

5.5GHz Peak Gain in dBi*

5.7GHz Peak Gain in dBi*

5.9GHz Peak Gain in dBi*

6.2GHz Peak Gain in dBi*

6.5GHz Peak Gain in dBi*

6.7GHz Peak Gain in dBi*

7GHz Peak Gain in dBi*

3.73 4.77 4.77 4.97**

4.83 4.30 5.37 5.59 Antenna Type Antenna Location

(Main/Aux) 2.4GHz Peak Gain in dBi*

2.43GHz Peak Gain in dBi*

2.47GHz Peak Gain in dBi*

2.483GHz Peak Gain in dBi*

5.2GHz Peak Gain in dBi*

5.4GHz Peak Gain in dBi*

5.6GHz Peak Gain in dBi*

5.8GHz Peak Gain in dBi*

6.2GHz Peak Gain in dBi*

6.5GHz Peak Gain in dBi*

6.6GHz Peak Gain in dBi*

7GHz Peak Gain in dBi*

PIFA Main/Aux 5.99 6.23 6.4 6.15 8 8.07 8.19 8.39 7.88 8.1 7.75 8.08

*All antenna gains include cable loss.

** Antenna Peak Gain is 4.72dBi at 5.9GHz for the Wireless Adapters Intel Wi-Fi 6E AX101 and Intel Wi-Fi 6E AX203. regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Simultaneous Transmission of Intel Wireless Adapters with Other Integrated or Plug-In Transmitters Based upon FCC Knowledge Database publication number 616217, when there are multiple transmitting devices installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements. OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessment to determine if any additional requirements for testing or FCC approval is necessary. Antenna Placement Within the Host Platform To ensure RF exposure compliance the antenna(s) used with the Intel wireless adapters must be installed in notebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operating modes and orientations of the host platform, with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the antenna when installed in the host system. Any separation distances less than those shown will require additional evaluation and FCC authorization. For WiFi/Bluetooth combination adapters it is recommended that a 5 cm separation distance between transmitting antennas be provided within the host system to maintain an adequate separation ratio for simultaneous WiFi and Bluetooth transmission. For less than 5 cm separation the separation ratio must be verified according to FCC publication KDB 447498 for the specific adapter. Wireless Adapter Minimum required antenna-to-user separation distance Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel Centrino Wireless-N 1000*

Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Advanced-N 6200*

Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Ultimate-N 6300 Intel Dual Band Wireless-AC 7260 Intel Dual Band Wireless-N 7260 Intel Wireless-N 7260 Intel Dual Band Wireless-AC 3160 Intel Dual Band Wireless-AC 3165 Intel Dual Band Wireless-AC 7265 Intel Dual Band Wireless-N 7265 Intel Wireless-N 7265 Intel Dual Band Wireless-AC 8260 Intel Dual Band Wireless-AC 8265 Intel Wireless-AC 9260 Intel Wireless-AC 9461 (9161NGW) regs.htm[8/25/2022 4:59:25 PM]

9 mm 9 mm 8 mm 9 mm 20 mm 8 mm 9 mm 6 mm 20 mm 12 mm 12 mm 8 mm 13 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 14 mm 19 mm Regulatory Information Intel Wireless-AC 9461 (9161D2W) Intel Wireless-AC 9462 (9162NGW) Intel Wireless-AC 9462 (9162D2W) Intel Wireless-AC 9560 (9560NGW) Intel Wireless-AC 9560 (9560D2W) Intel Wireless-AC 9560 (9560D2WL) Intel Tri-Band Wireless-AC 17265 Intel Tri-Band Wireless-AC 18260 Intel Tri-Band Wireless-AC 18265 Intel Wireless Gigabit Sink W13100 Intel Wireless Gigabit 11000 Intel Wireless Gigabit Sink W13110VR Intel Wireless Gigabit 11100VR Intel Wi-Fi 6E AX101 (AX101NGW) Intel Wi-Fi 6E AX101 (AX101D2W) Intel Wi-Fi 6 AX200 (AX200NGW) Intel Wi-Fi 6 AX200 (AX200D2WL) Intel Wi-Fi 6 AX201 (AX201D2W) Intel Wi-Fi 6 AX201 (AX201D2WL) Intel Wi-Fi 6 AX201 (AX201NGW) Intel Wi-Fi 6E AX203 (AX203NGW) Intel Wi-Fi 6E AX203 (AX203D2W) Intel Wi-Fi 6E AX204 (AX204NGW) Intel Wi-Fi 6E AX204 (AX204D2W) Intel Wi-Fi 6E AX210 (AX210NGW) Intel Wi-Fi 6E AX210 (AX210D2W) Intel Wi-Fi 6E AX211 (AX211NGW) Intel Wi-Fi 6E AX211 (AX211D2W) Intel Wi-Fi 6E AX211 (AX211D2WH) Intel Wi-Fi 6E AX211 (AX211D2WL) Intel Wi-Fi 6E AX411 (AX411NGW) Intel Wi-Fi 6E AX411 (AX411E2W) 12 mm 14 mm 15 mm 18 mm 15 mm 15 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 18 mm (30 mm using UNII-4 band) 13 mm (27 mm using UNII-4 band) 18 mm 19 mm 12 mm 15 mm 17 mm 18 mm (28 mm using UNII-4 band) 16 mm (30 mm using UNII-4 band) 14 mm 19 mm 13 mm 17 mm 14 mm 14 mm

> 20 cm 15 mm 15 mm 15 mm

* This wireless adapter may be installed in mobile devices only (requires > 20 cm antenna separation from the body of user). Additional regulatory authorization process may be required if wishing to place the 60 GHz/802.11ad RFEM (antenna array) closer than 20 cm to the user. Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label. The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. For country-specific approvals, see Radio Approvals. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines. China:

Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from permissible settings and restrictions in the country of use could be an infringement of national law and may be punished as such. Statements of European Compliance Each of the adapters listed below comply with the essential requirements of the European Union directive 2014/53/EU. Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel Centrino Wireless-N 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Ultimate-N 6300 Intel Dual Band Wireless-AC 7260 Intel Dual Band Wireless-N 7260 Intel Wireless-N 7260 Intel Dual Band Wireless-AC 3160 Intel Dual Band Wireless-AC 3165 Intel Dual Band Wireless-AC 7265 Intel Dual Band Wireless-N 7265 Intel Wireless-N 7265 Intel Dual Band Wireless-AC 8260 Intel Dual Band Wireless-AC 8265 Intel Wireless-AC 9260 Intel Wireless-AC 9560 Intel Tri-Band Wireless-AC 17265 Intel Tri-Band Wireless-AC 18260 Intel Tri-Band Wireless-AC 18265 Intel Wireless Gigabit Sink W13100 Intel Wireless Gigabit 11000 Intel Wireless Gigabit Sink W13110VR Intel Wireless Gigabit 11100VR regs.htm[8/25/2022 4:59:25 PM]

Regulatory Information Intel Wi-Fi 6 AX101 Intel Wi-Fi 6 AX200 Intel Wi-Fi 6 AX201 Intel Wi-Fi 6 AX203 Intel Wi-Fi 6 AX204 Intel Wi-Fi 6E AX210 Intel Wi-Fi 6E AX211 Intel Wi-Fi 6E AX411 Back to Top Back to Contents Trademarks and Disclaimers regs.htm[8/25/2022 4:59:25 PM]

Specifications Back to Contents Specifications This section provides specification information for the family of Intel wireless adapters. The following list may not be all inclusive. Intel Centrino Wireless-N 100 Intel Centrino Wireless-N 105 Intel Centrino Wireless-N 130 Intel Centrino Wireless-N 135 Intel Centrino Wireless-N 1000 Intel Centrino Wireless-N 1030 Intel Centrino Wireless-N 2200 Intel Centrino Wireless-N 2230 Intel Centrino Wireless-N + WiMAX 6150 Intel Centrino Advanced-N 6200 Intel Centrino Advanced-N 6205 Intel Centrino Advanced-N 6230 Intel Centrino Advanced-N 6235 Intel Centrino Advanced-N + WiMAX 6250 Intel Centrino Ultimate-N 6300 Intel Dual Band Wireless-AC 7260 Intel Dual Band Wireless-N 7260 Intel Wireless-N 7260 Intel Dual Band Wireless-AC 3160 Intel Dual Band Wireless-AC 3165 Intel Dual Band Wireless-AC 3168 Intel Dual Band Wireless-AC 7265 Intel Dual Band Wireless-N 7265 Intel Wireless-N 7265 Intel Dual Band Wireless-AC 8260 Intel Dual Band Wireless-AC 8265 Intel Wireless-AC 9260 Intel Wireless-AC 9461 Intel Wireless-AC 9462 Intel Wireless-AC 9560 Intel Tri-Band Wireless-AC 17265 Intel Tri-Band Wireless-AC 18260 Intel Tri-Band Wireless-AC 18265 Intel Wireless Gigabit Sink W13100 Intel Wireless Gigabit 11000 Intel Wireless Gigabit Sink W13110VR Intel Wireless Gigabit 11100VR Intel Wi-Fi 6 AX101 Intel Wi-Fi 6 AX200 Intel Wi-Fi 6 AX201 Intel Wi-Fi 6 AX203 Intel Wi-Fi 6 AX204 Intel Wi-Fi 6E AX210 Intel Wi-Fi 6E AX211 Intel Wi-Fi 6E AX411 Intel Centrino Wireless-N 100, Intel Centrino Wireless-N 105, Intel Centrino Wireless-N 130 and Intel Centrino Wireless-N 135 Form Factor PCI Express* Half-Mini Card specs.htm[8/25/2022 4:59:28 PM]

Specifications Dimensions Antenna Interface Connector Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity Connector Interface Voltage Operating Temperature

(Adapter Shield) Humidity WiFi Frequency Modulation 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 2.4 GHz (802.11b/g/n) Frequency band 2.400 - 2.4835 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.11n Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth Support General Operating Systems MIMO Configuration: 1X1 Tx/Rx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Centrino Wireless-N 100: None Intel Centrino Wireless-N 105: None Intel Centrino Wireless-N 130: Bluetooth 2.1, 2.1 + EDR, 3.0, 3.0+HS Intel Centrino Wireless-N 135: Bluetooth 4.0 (Bluetooth Low-Energy and Bluetooth 3.0 +HS) Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bit and 64-bit) Wi-Fi Alliance*

certification Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-

Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions certification Cisco Compatible Extensions, v4.0 IEEE Feature Sets IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h Architecture Infrastructure or ad hoc (peer-to-peer) operating modes Security WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Centrino Wireless-N 1000 specs.htm[8/25/2022 4:59:28 PM]

Specifications Form Factor PCI Express* Mini Card and Half-Mini Card SKUs Dimensions Intel Centrino Wireless-N 1000 - 1X2 MC/HMC Mini Card: Width 2.0 in x Length 1.18 in x Height 0.18 in (50.80 mm x 30 mm x 4.5 mm) Antenna Interface Connector Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity Connector Interface 52-pin Mini Card edge connector Voltage 3.3 V Operating Temperature

(Adapter Shield) 0 to +80 degrees Celsius Humidity WiFi 50% to 90% non-condensing (at temperatures of 25 C to 35 C) Frequency Modulation 2.4 GHz (802.11b/g/n) Frequency band 2.41-2.474 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, CCK, DQPSK, DBPSK Wireless Medium 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.11n Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates General Operating Systems 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Microsoft Windows* XP (32 and 64 bit) and Windows Vista* (32 and 64 bit), Ubuntu Linux*

Wi-Fi Alliance*

certification Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions certification Cisco Compatible Extensions, v4.0 WLAN Standard IEEE 802.11g, 802.11b, 802.11n, 802.11d, 802.11e, 802.11i, Architecture Security Infrastructure or ad hoc (peer-to-peer) operating modes WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, 802.1X: EAP-SIM, LEAP, PEAP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Encryption AES-CCMP 128-bit, WEP 128-bit and 64-bit, CKIP, TKIP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Centrino Wireless-N 2200 and Intel Centrino Wireless-N 2230 Form Factor PCI Express* Half-Mini Card Dimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Antenna Interface Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 specs.htm[8/25/2022 4:59:28 PM]

Specifications Connector Antenna Diversity On-board diversity Connector Interface Voltage Operating Temperature

(Adapter Shield) Humidity WiFi Frequency Modulation 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 2.4 GHz (802.11b/g/n) Frequency band 2.400 - 2.4835 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.11n Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth Support General Operating Systems MIMO Configuration: 2X2 Tx/Rx: 300, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Centrino Wireless-N 2200: None Intel Centrino Wireless-N 2230: Bluetooth 4.0 (Bluetooth Low-Energy and Bluetooth 3.0 +HS) Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bit and 64-bit) Wi-Fi Alliance*

certification Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-

Personal, WPA2-Enterprise, WMM, WPS Cisco Compatible Extensions certification Cisco Compatible Extensions, v4.0 IEEE Feature Sets IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h Architecture Infrastructure or ad hoc (peer-to-peer) operating modes Security WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Centrino Wireless-N 1030 and Intel Centrino Advanced-N 6230 Form Factor PCI Express* Half-Mini Card Dimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) specs.htm[8/25/2022 4:59:28 PM]

Specifications Antenna Interface Connector Antenna Diversity Network Standards Connector Interface Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 802.11a/b/g/n (varies by adapter) and Bluetooth 3.0 + HS 52-pin Mini Card edge connector Voltage 3.3 V 0 to +80 degrees Celsius Operating Temperature

(Adapter Shield) Humidity 50% to 95% non-condensing (at temperatures of 25 C to 35 C) WiFi Network Standards Frequency Modulation Frequency band Intel Centrino Wireless-N 1030: 802.11b/g/n Intel Centrino Advanced-N 6230: 802.11a/g/n 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.4835 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.11n Data Rates Intel Centrino Advanced-N 6230:

Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Intel Centrino Wireless-N 1030:

Rx (Mbps): 300, 270, 243, 240, 180 Tx/Rx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Bluetooth Bluetooth Version 3.0 + HS General Operating Systems Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Windows* 8 (32-bit and 64-bit) Windows* 8.1 (32-bit and 64-bit) Wi-Fi Alliance*

certification Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2P Cisco Cisco Compatible Extensions, v4.0 specs.htm[8/25/2022 4:59:28 PM]

Specifications Compatible Extensions certification WLAN Standard IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Infrastructure or ad hoc (peer-to-peer) operating modes Security Product Safety WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-

AKA UL, C-UL, CB (IEC/EN 60950-1) Intel Centrino Advanced-N 6235 Form Factor PCI Express* Half-Mini Card Dimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Antenna Interface Connector Antenna Diversity Network Standards Connector Interface Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 802.11a/b/g/n and Bluetooth 4.0 52-pin Mini Card edge connector Voltage 3.3 V 0 to +80 degrees Celsius Operating Temperature

(Adapter Shield) Humidity 50% to 95% non-condensing (at temperatures of 25 C to 35 C) Frequency Modulation Frequency band 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.4835 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Bluetooth Bluetooth Version 4.0 (3.0 +HS ) General specs.htm[8/25/2022 4:59:28 PM]

Specifications Operating Systems Wi-Fi Alliance*

certification Cisco Compatible Extensions certification WLAN Standard Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bit and 64-bit) Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2P Cisco Compatible Extensions, v4.0 IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Infrastructure or ad hoc (peer-to-peer) operating modes Security Product Safety WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-

AKA UL, C-UL, CB (IEC/EN 60950-1) Intel Centrino Advanced-N + WiMAX 6250 and Intel Centrino Wireless-N + WiMAX 6150 Form Factor PCI Express* Half-Mini Card Dimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius Antenna Interface Connector Antenna Diversity Connector Interface Voltage Operating Temperature

(Adapter Shield) Humidity 50% to 95% non-condensing (at temperatures of 25 C to 35 C) WiFi Frequency Modulation Intel Centrino Advanced-N + WiMAX 6250 2.4 GHz (802.11b/g/n), 5 GHz (802.11a/n) Intel Centrino Wireless-N + WiMAX 6150 2.4 GHz (802.11b/g/n) Frequency band 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.4835 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.11n Data Rates Intel Centrino Wireless-N + WiMAX 6150 MIMO Configuration: 1X2 specs.htm[8/25/2022 4:59:28 PM]

Specifications IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates General Operating Systems Rx: 300, 270, 243, 240, 180 Mbps Rx/Tx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps Intel Centrino Advanced-N + WiMAX 6250 MIMO Configuration: 2X2 Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Windows* 8 (32-bit and 64-bit) Windows* 8.1 (32-bit and 64-bit) Wi-Fi Alliance*

certification Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification IEEE Feature Sets Intel Centrino Wireless-N + WiMAX 6150:

IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d Intel Centrino Advanced-N + WiMAX 6250:

802.11a, IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d Architecture Infrastructure or ad hoc (peer-to-peer) operating modes Security WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-

AKA Product Safety UL, C-UL, CB (IEC/EN 60950-1) WiMAX General Operating Systems Standard Compliance WiMAX System Profile Feature set Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Windows* 8 (32-bit and 64-bit) Windows* 8.1 (32-bit and 64-bit) 802.16e-2005 Corrigenda 2 (D4) Intel Centrino Wireless-N + WiMAX 6150:

Mobile WiMAX release 1, Wave II. Supports 3A and 1A/B profiles Intel Centrino Advanced-N + WiMAX 6250:

Mobile WiMAX release 1, Wave II. Supports 3A, 5A/C, 1A/B, and 5BL profiles Security Key Management Protocol (PKMv2) specs.htm[8/25/2022 4:59:28 PM]

Specifications Encryption 128-bit CCMP (Counter-Mode/CBC-MAC) based on AES encryption WiMAX Frequency band Intel Centrino Wireless-N + WiMAX 6150: 2.3-2.4 GHz / 2.496-2.690 GHz Intel Centrino Advanced-N + WiMAX 6250: 2.3-2.4 GHz / 2.496-2.690 GHz / 3.4-3.8 GHz Scalable OFDMA (SOFDMA): 512 and 1024 FFT Intel Centrino Wireless-N + WiMAX 6150:

Channel bandwidths: 5 and 10 MHz Intel Centrino Advanced-N + WiMAX 6250:

Channel bandwidths: 5, 7, 8.75 and 10 MHz Modulation UL - QPSK, 16 QAM Wireless Medium DL - QPSK, 16 QAM, 64 QAM Duplex mode: TDD operations sub-carrier permutation: PUSC WiMAX Network Release Feature set Rate Performance RF Transmitter Output Power SPWG/NWG Release 1.5 Intel Centrino Wireless-N + WiMAX 6150:

Up to 10 Mbps DL and 4 Mbps UL @ peak rate

(OTA performance, 10MHz channel) Intel Centrino Advanced-N + WiMAX 6250:

Up to 20 Mbps DL and 6 Mbps UL @ peak rate

(OTA performance, 10MHz channel) Compliance with Power class 2 Intel Centrino Advanced-N 6200, Intel Centrino Advanced-N 6205 and Intel Centrino Ultimate-N 6300 Form Factor Intel Centrino Advanced-N 6200, Intel Centrino Ultimate-N 6300:

PCI Express* Full-Mini Card and Half-Mini Card. Intel Centrino Advanced-N 6205: PCI Express* Half-Mini Card. Dimensions Full-Mini Card: Width 2.00 in x Length 1.18 in x Height 0.18 in (50.95 mm x 30 mm x 4.5 mm) Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5 mm) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 On-board diversity 52-pin Mini Card edge connector 3.3 V 0 to +80 degrees Celsius Antenna Interface Connector Antenna Diversity Connector Interface Voltage Operating Temperature

(Adapter specs.htm[8/25/2022 4:59:28 PM]

Specifications Shield) Humidity 50% to 95% non-condensing (at temperatures of 25 C to 35 C) Frequency Modulation Frequency band 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.4835 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.11n Data Rates Intel Centrino Ultimate-N 6300:

Tx/Rx: 450, 405, 360, 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps Intel Centrino Advanced-N 6200, Intel Centrino Advanced-N 6205:

Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates General Operating Systems 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Microsoft Windows* XP (32-bit and 64-bit) Windows Vista* (32-bit and 64-bit) Windows* 7 (32-bit and 64-bit) Windows* 8 (32-bit and 64-bit) Windows* 8.1 (32-bit and 64-bit) Wi-Fi Alliance*

certification Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-

Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA Cisco Compatible Extensions certification WLAN Standard Cisco Compatible Extensions, v4.0 IEEE 802.11g, 802.11b, 802.11a, 802.11n Architecture Infrastructure or ad hoc (peer-to-peer) operating modes Security WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-

AKA Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-AC 7260 Form Factors Half-Mini Card and M.2 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe and USB 2.0 for both form factors Antenna Interface Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 specs.htm[8/25/2022 4:59:28 PM]

Specifications Connector Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) Humidity Frequency Modulation Frequency band Intel Dual Band Wireless-AC 7260 Model 7260HMW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, HMC Model 7260NGW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, M.2 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Dual Band Wireless-AC 7260: 2 X 2 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates Intel Dual Band Wireless-AC 7260: Up to 867 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General Operating Systems 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by the following adapters Model 7260HMW Model 7260NGW Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-

bit) Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Security Cisco Compatible Extensions, v4.0 Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 specs.htm[8/25/2022 4:59:28 PM]

Specifications Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP Wi-Fi Direct*

Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-N 7260 Intel Wireless-N 7260 Form Factors Half-Mini Card, M.2 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe, USB 2.0 for both form factors Antenna Interface Connector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Intel Dual Band Wireless-N 7260 Model 7260HMW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, HMC Model 7260NGW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, M.2 Model 7260HMW NB - 802.11agn, 2x2, PCIe, USB, HMC Model 7260NGW NB - 802.11agn, 2x2, PCIe, USB, M.2 Intel Wireless-N 7260 Model 7260HMW BN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, M.2 Model 7260NGW BN - 802.11bgn, 2x2, Bluetooth 4.0, PCIe, USB, M.2 Operating Temperature

(Adapter Shield) 0 to +80 degrees Celsius Humidity 50% to 95% non-condensing (at temperatures of 25 C to 35 C) Frequency Modulation

(See above, not all bands supported by all adapters) Frequency band 5GHz (802.11a/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. 802.11n spatial streams All adapters: 2 X 2 spatial streams Data Rates All data rates are theoretical maximums. IEEE 802.11n Data Rates IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Bluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by the specs.htm[8/25/2022 4:59:28 PM]

Specifications following adapters Model 7260HMW AN Model 7260NGW AN Model 7260HMW BN Model 7260NGW BN General Operating Systems Wi-Fi Alliance*

certification Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-

bit) Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Security Authentication Cisco Compatible Extensions, v4.0 WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-

AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP Wi-Fi Direct* Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-AC 3160 Form Factors Half-Mini Card and M.2 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe and USB 2.0 for both form factors Antenna Interface Connector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) Humidity Frequency Modulation Frequency band Intel Dual Band Wireless-AC 3160 Model 3160HMW - 802.11agn, ac, 1x1, Bluetooth 4.0, PCIe, USB, HMC Model 3160NGW - 802.11agn, ac, 1x1, Bluetooth 4.0, PCIe, USB, M.2 0 to +80 degrees Celsius 50% to 90% non-condensing (at temperatures of 25 C to 35 C) 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. specs.htm[8/25/2022 4:59:28 PM]

Specifications Spatial streams Intel Dual Band Wireless-AC 3160: 1 X 1 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates Intel Dual Band Wireless-AC 3160: Up to 433 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by the following adapters Model 3160HMW Model 3160NGW Operating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-bit) Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Security Cisco Compatible Extensions, v4.0 Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP Wi-Fi Direct*

Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-AC 3165 (Model 3165NGW) Form Factors M.2 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe and USB 2.0 Antenna Interface Connector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) 802.11abgn, 802.11ac, 802.11d, 802.11e, 802.11i, 802.11h, 802.11w 0 to +80 degrees Celsius Humidity 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) specs.htm[8/25/2022 4:59:28 PM]

Specifications Frequency Modulation Frequency band 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Dual Band Wireless-AC 3165: 1 X 1 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates Intel Dual Band Wireless-AC 3165: Up to 433 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General Operating Systems 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-

bit) Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Security Cisco Compatible Extensions, v4.0 Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP Wi-Fi Direct*

Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-AC 3168 Form Factors M.2 2230 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe and USB 2.0 Antenna Interface Connector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity 802.11abgn, 802.11ac, 802.11d, 802.11e, 802.11i, 802.11h, 802.11w IEEE 802.11 Networking specs.htm[8/25/2022 4:59:28 PM]

Specifications Standards Operating Temperature

(Adapter Shield) Humidity Frequency Modulation Frequency band 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Dual Band Wireless-AC 3168: 1 X 1 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates Intel Dual Band Wireless-AC 3168: Up to 433 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.2 (BLE) Operating Systems Linux, Windows* 8.1 (64-bit), Windows* 10 (64-bit) Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Security Cisco Compatible Extensions, v4.0 Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP Wi-Fi Direct*

Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-AC 7265 (Model 7265NGW) Form Factors M.2 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe and USB 2.0 specs.htm[8/25/2022 4:59:28 PM]

Specifications Antenna Interface Connector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) Humidity Frequency Modulation Frequency band Intel Dual Band Wireless-AC 7265 Model 7265NGW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, M.2 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Dual Band Wireless-AC 7265: 2 X 2 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates Intel Dual Band Wireless-AC 7265: Up to 867 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General Operating Systems 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by the following adapters Model 7265NGW Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-

bit) Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Security Cisco Compatible Extensions, v4.0 Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP Wi-Fi Direct*

WPA2, AES-CCMP specs.htm[8/25/2022 4:59:28 PM]

Specifications Encryption and Authentication Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-N 7265 (Models 7265NGW AN and 7265NGW NB) Intel Wireless-N 7265 (Model 7265NGW BN) Form Factors M.2 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe, USB 2.0 Antenna Interface Connector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Intel Dual Band Wireless-N 7265 Model 7265NGW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, M.2 Model 7265NGW NB - 802.11agn, 2x2, PCIe, USB, M.2 Intel Wireless-N 7265 Model 7265NGW BN - 802.11bgn, 2x2, Bluetooth 4.0, PCIe, USB, M.2 Operating Temperature

(Adapter Shield) 0 to +80 degrees Celsius Humidity 50% to 90% non-condensing (at temperatures of 25 C to 35 C) Frequency Modulation

(See above, not all bands supported by all adapters) Frequency band 5GHz (802.11a/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. 802.11n spatial streams All adapters: 2 X 2 spatial streams Data Rates All data rates are theoretical maximums. IEEE 802.11n Data Rates IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth specs.htm[8/25/2022 4:59:28 PM]

Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by the following adapters Model 7265NGW AN Model 7265NGW NB Model 7265NGW BN Specifications General Operating Systems Wi-Fi Alliance*

certification Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-

bit) Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Security Authentication Cisco Compatible Extensions, v4.0 WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-

AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP Wi-Fi Direct* Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-AC 8260 Form Factors Half-Mini Card and M.2 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe and USB 2.0 for both form factors Antenna Interface Connector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) Humidity Frequency Modulation Frequency band Intel Dual Band Wireless-AC 8260 Model 8260NGW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, M.2 0 to +80 degrees Celsius 50% to 95% non-condensing (at temperatures of 25 C to 35 C) 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Dual Band Wireless-AC 8260: 2 X 2 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates Intel Dual Band Wireless-AC 8260: Up to 867 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps specs.htm[8/25/2022 4:59:28 PM]

Specifications Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General Operating Systems 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by the following adapters Model 8260NGW Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-

bit) Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Security Cisco Compatible Extensions, v4.0 Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP Wi-Fi Direct*

Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Dual Band Wireless-AC 8265 (Models 8265NGWH/8265NGW/8265D2W) General Dimensions (H x W x D) Weight M.2 2230: 22 mm x 30 mm x 2.4 mm M.2 1216: 12 mm x 16 mm x 1.8 mm M.2 2230: 2.6g M.2 1216: 0.6g Antenna Diversity Supported Radio ON/OFF Control Supported Connector Interface M.2: PCIe, USB, or UART (M.2 1216 only) Operating Temperature

(Adapter Shield) 0 to +80 degrees Celsius Humidity 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1*, Microsoft Windows 10*, Linux* (limited feature support), Android specs.htm[8/25/2022 4:59:28 PM]

Specifications Wi-Fi Alliance*

certification IEEE WLAN Standard Roaming Bluetooth Security Authentication Authentication Protocols Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA*, WPA2*, WPS2*, Protected Management Frames, Wi-Fi Direct* for peer to peer device connections, Wi-Fi Miracast*

as Source. IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r, 802.11k, 802.11v pending OS support; Fine Timing Measurement based on 802.11REVmc Supports seamless roaming between access points Dual Mode Bluetooth* 4.2, BLE WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA, EAP-AKA PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMP WPA2-PSK, AES-CCMP Wi-Fi Direct*

Encryption and Authentication Compliance Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models Model 8265NGWH Model 8265NGW Model 8265D2W 802.11ac, 2x2, Bluetooth* 4.2, PCIe, USB, LTE Coexistence, eFEM, M.2 2230 HE 802.11ac, 2x2, Bluetooth* 4.2, PCIe, USB, M.2 2230 MS 802.11ac, 2x2, Bluetooth* 4.2, PCIe, LTE Coexistence, M.2 1216 SD Frequency Modulation Frequency band Modulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM 2.400 - 2.4835GHz (dependent on country) CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Dual Band Wireless-AC 8265: 2 X 2 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates Intel Dual Band Wireless-AC 8265: Up to 867 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wireless-AC 9260 (Models 9260NGW and 9260D2WL) specs.htm[8/25/2022 4:59:28 PM]

Specifications General Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max

(bottom side)]

M.2 1216: 12 mm x 16 mm x 1.67 (0.08) mm Weight M.2 2230: 2.9 0.3 g M.2 1216: 0.61 0.1 g Antenna Diversity Supported Radio ON/OFF Control Supported Connector Interface M.2: PCIe, USB Operating Temperature

(Adapter Shield) 0 to +80 degrees Celsius Humidity 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Operating Systems Microsoft Windows 10*, Linux* (limited feature support), Chrome*

Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*, WPS2*, Protected Management Frames, Wi-Fi Miracast* as Source, and Wi-Fi Direct*. IEEE WLAN Standard IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r, 802.11k, 802.11v pending OS support; Fine Timing Measurement based on 802.11REVmc Roaming Bluetooth Security Supports seamless roaming between access points Bluetooth* 5 Authentication WPA* and WPA2*, 802.1X (EAP-TLS, TTLS, PEAP, EAP-SIM, EAP-AKA, EAP-AKA) Authentication Protocols PAP, CHAP, TLS, MS-CHAP*, MS-CHAPv2*

Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMP WPA2-PSK, AES-CCMP Wi-Fi Direct*

Encryption and Authentication Compliance US Government FIPS, FISMA Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models 9260NGW 9260D2WL 802.11ac wave 2, 2x2, Bluetooth* 5, PCIe, USB, M.2 2230 802.11ac wave 2, 2x2, Bluetooth* 5, PCIe, USB, M.2 1216 LTE Coex Frequency Modulation Frequency band Modulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM 2.400 - 2.4835GHz (dependent on country) CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) specs.htm[8/25/2022 4:59:28 PM]

Specifications Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Wireless-AC 9260: 2 X 2 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates 1.73 Gbps when using 160MHz channels IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wireless-AC 9461 (Models 9461NGW/9461D2W) General Dimensions (H x W x D) Weight M.2 2230: 22 mm x 30 mm x 2.4 mm M.2 1216: 12 mm x 16 mm x 1.57 (+-0.08) mm M.2 2230: 2.7g M.2 1216: 0.7g Antenna Diversity Supported Radio ON/OFF Control Supported Connector Interface M.2: CNVio Operating Temperature

(Adapter Shield) 0C to +80C Humidity 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Operating Systems Microsoft Windows 10*, Linux* (limited feature support), Chrome Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*, WPS2*, Protected Management Frames, Wi-Fi Miracast* as Source, and Wi-Fi Direct IEEE WLAN Standard IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r, 802.11k, 802.11v pending OS support; Fine Timing Measurement based on 802.11REVmc Roaming Bluetooth Security Supports seamless roaming between access points Bluetooth* 5 Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, EAP-SIM, EAP-AKA) Authentication Protocols PAP, CHAP, TLS, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMP Wi-Fi Direct*

Encryption and Authentication Compliance WPA2-PSK, AES-CCMP specs.htm[8/25/2022 4:59:28 PM]

Specifications Regulatory For a list of country approvals, please contact your local Intel representatives. US Government FIPS, FISMA Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models 9461NGW 9461D2W 802.11ac wave 2, 1x1, Bluetooth* 5, PCIe, USB, M.2 2230, Single Antenna 802.11ac wave 2, 1x1, Bluetooth* 5, PCIe, USB, M.2 1216, Single Antenna Frequency Modulation Frequency band Modulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM 2.400 - 2.4835GHz (dependent on country) CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Wireless-AC 9461: 1 X 1 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates 433 Mbps when using 80MHz channels IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wireless-AC 9462 (Models 9462NGW/9462D2W) General Dimensions (H x W x D) Weight M.2 2230: 22 mm x 30 mm x 2.4 mm M.2 1216: 12 mm x 16 mm x 1.57 (+-0.08) mm M.2 2230: 2.7g M.2 1216: 0.7g Antenna Diversity Supported Radio ON/OFF Control Supported Connector Interface M.2: CNVio Operating Temperature

(Adapter Shield) 0C to +80C Humidity 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Operating Systems Microsoft Windows 10*, Linux* (limited feature support), Chrome specs.htm[8/25/2022 4:59:28 PM]

Specifications Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*, WPS2*, Protected Management Frames, Wi-Fi Miracast* as Source, and Wi-Fi Direct IEEE WLAN Standard IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r, 802.11k, 802.11v pending OS support; Fine Timing Measurement based on 802.11REVmc Roaming Bluetooth Security Supports seamless roaming between access points Bluetooth* 5 Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, EAP-SIM, EAP-AKA) Authentication Protocols PAP, CHAP, TLS, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMP Wi-Fi Direct*

Encryption and Authentication Compliance Regulatory WPA2-PSK, AES-CCMP For a list of country approvals, please contact your local Intel representatives. US Government FIPS, FISMA Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models 9462NGW 9462D2W 802.11ac wave 2, 1x1, Bluetooth* 5, PCIe, USB, M.2 2230, Diversity Antenna 802.11ac wave 2, 1x1, Bluetooth* 5, PCIe, USB, M.2 1216, Diversity Antenna Frequency Modulation Frequency band Modulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM 2.400 - 2.4835GHz (dependent on country) CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. Spatial streams Intel Wireless-AC 9462: 1 X 1 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates 433 Mbps when using 80MHz channels IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wireless-AC 9560 (Models 9560NGW/9560D2W) General specs.htm[8/25/2022 4:59:28 PM]

Specifications Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm M.2 1216: 12 mm x 16 mm x 1.8 mm Weight M.2 2230: 2.6g M.2 1216: 0.6g Antenna Diversity Supported Radio ON/OFF Control Connector Interface Operating Temperature

(Adapter Shield) Humidity Operating Systems Wi-Fi Alliance*

certification IEEE WLAN Standard Roaming Bluetooth Security Supported M.2: CNVio 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 10*, Linux* (limited feature support), Chrome*

Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*, WPS2*, Protected Management Frames, Wi-Fi Miracast* as Source, and Wi-Fi Direct* (For Microsoft Windows* only). IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r, 802.11k, 802.11v pending OS support; Fine Timing Measurement based on 802.11-2016 Supports seamless roaming between access points Bluetooth* 5 Authentication WPA* and WPA2*, 802.1X (EAP-TLS, TTLS, PEAP, EAP-SIM, EAP-AKA, EAP-AKA) Authentication Protocols PAP, CHAP, TLS, MS-CHAP*, MS-CHAPv2*

Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMP WPA2-PSK, AES-CCMP Wi-Fi Direct*

Encryption and Authentication Compliance US Government FIPS, FISMA Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models 9560NGW 9560D2W 802.11ac wave 2, 2x2, Bluetooth* 5, PCIe, USB, M.2 2230 802.11ac wave 2, 2x2, Bluetooth* 5, PCIe, USB, M.2 1216 Frequency Modulation Frequency band 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. specs.htm[8/25/2022 4:59:28 PM]

Specifications Spatial streams Intel Wireless-AC 9560: 2 X 2 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates IEEE 802.11n Data Rates IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 1.73 Gbps when using 160MHz channels Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Tri-Band Wireless-AC 17265 (17265NGW/17265NGW LC) Form Factors M.2 Type 3030 Electrical interfaces M.2 Key 1-DP: 2xPCIe, USB, DP. Interface to Intel Wireless Gigabit-Antenna M10041 Module using X-FL, and one dedicated for Bluetooth Antenna Interface Connector X.FL; Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) Humidity Frequency Modulation Frequency band Modulation Wireless Medium Channels 802.11ac, 802.11ad, 802.11abgn, 802.11a, 802.11d, 802.11e, 802.11i, 802.11h, 802.11w 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 60GHz

(802.11ad) 57GHz - 64GHz

(dependent on country) DPSK, BPSK, QPSK, 16 QAM, DMG control PHY, DMG SC PHY 1, 2 and 3, subject to country rules 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz

(dependent on country) 2.400 - 2.4835GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) CCK, DQPSK, DBPSK 2.4GHz ISM: Orthogonal Frequency Division Multiplexing

(OFDM) All channels as defined by the relevant specification and country rules. Spatial streams N/A Intel Tri-Band Wireless-AC 17265 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates IEEE 802.11ad Data Rates Intel Tri-Band Wireless-AC 17265: Up to 867 Mbps 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps specs.htm[8/25/2022 4:59:28 PM]

Specifications Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standby Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification Security Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, AES-GCMP, TKIP Wi-Fi Direct*

Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Tri-Band Wireless-AC 17265 (17265NGW/17265NGW LC) Form Factors M.2 Type 3030 Electrical interfaces M.2 Key 1-DP: 2xPCIe, USB, DP. Interface to Intel Wireless Gigabit-Antenna M10041 Module using X-FL, and one dedicated for Bluetooth Antenna Interface Connector X.FL; Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) Humidity Frequency Modulation Frequency band Modulation Wireless Medium 802.11ac, 802.11ad, 802.11abgn, 802.11a, 802.11d, 802.11e, 802.11i, 802.11h, 802.11w 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 60GHz

(802.11ad) 57GHz - 64GHz

(dependent on country) DPSK, BPSK, QPSK, 16 QAM, DMG control PHY, DMG SC PHY 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz

(dependent on country) 2.400 - 2.4835GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) CCK, DQPSK, DBPSK 2.4GHz ISM: Orthogonal Frequency Division Multiplexing

(OFDM) specs.htm[8/25/2022 4:59:28 PM]

Specifications Channels 1, 2 and 3, subject to country rules All channels as defined by the relevant specification and country rules. Spatial streams N/A Intel Tri-Band Wireless-AC 17265 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates IEEE 802.11ad Data Rates Intel Tri-Band Wireless-AC 17265: Up to 867 Mbps 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standby Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification Security Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, AES-GCMP, TKIP Wi-Fi Direct*

Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) Intel Tri-Band Wireless-AC 18260 (18260NGW) Form Factors M.2 Type 2230 Electrical interfaces M.2 Key 1-DP: 2xPCIe, USB, DP. Interface to Intel Wireless Gigabit-Antenna M10041 or M10042 Module using X-FL (single coax cable to carry power, IF and control) Dimensions 22 mm x 30 mm x S3 [1.5mm Max (Top Side)/ 0.1mm max (bottom side)]

Antenna Interface Connector X.FL; Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating specs.htm[8/25/2022 4:59:28 PM]

IEEE 802.11abgn, 802.11ac, 802.11ad, 802.11d, 802.11e, 802.11i, 802.11h, 802.11w 0 to +80 degrees Celsius Specifications Temperature

(Adapter Shield) Humidity Frequency Modulation Frequency band Modulation Wireless Medium Channels 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 60GHz

(802.11ad) 57GHz - 64GHz

(dependent on country) DPSK, BPSK, QPSK, 16 QAM, DMG control PHY, DMG SC PHY 1, 2 and 3, subject to country rules 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz

(dependent on country) 2.400 - 2.4835GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) CCK, DQPSK, DBPSK 2.4GHz ISM: Orthogonal Frequency Division Multiplexing

(OFDM) All channels as defined by the relevant specification and country rules. Spatial streams N/A Intel Tri-Band Wireless-AC 18260 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates IEEE 802.11ad Data Rates Intel Tri-Band Wireless-AC 18260: Up to 867 Mbps 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Bluetooth General 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE), 4.1 Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standby Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions, v4.0 Cisco Compatible Extensions certification Security Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, AES-GCMP, TKIP Wi-Fi Direct*

Encryption and Authentication WPA2, AES-CCMP Product Safety UL, C-UL, CB (IEC/EN 60950-1) specs.htm[8/25/2022 4:59:28 PM]

Specifications Intel Tri-Band Wireless-AC 18265 (18265NGW) General Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5mm Max (Top Side)/ 0.1mm Max (Bottom Side)]

Weight M.2 2230: 2.4g Antenna Diversity Supported Radio ON/OFF Control Supported Connector interface M.2: PCIe, USB Interface to Intel Wireless Gigabit-Antenna M10101 Module using X-FL Operating Temperature

(Adapter Shield) Humidity Non-

Operating Operating Systems Wi-Fi Alliance IEEE WLAN Standard Roaming Bluetooth Frequency Modulation Frequency band Modulation Wireless Medium Channels

(single coax cable to carry power, IF and control) 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 7*, Microsoft Windows 8.1*, Microsoft Windows 10, Linux* (limited feature support), Android Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA*, WPA2*, WPS2, Protected Management Frames, Wi-Fi Direct* for peer to peer device connections, Wi-Fi Miracast as Source IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r, 802.11k, 802.11v pending OS support; Fine Timing Measurement based on 802.11REVmc Supports seamless roaming between respective access points Dual Mode Bluetooth* 4.2, BLE 60GHz

(802.11ad) 57GHz - 64GHz

(dependent on country) DPSK, BPSK, QPSK, 16 QAM, DMG control PHY, DMG SC PHY 1, 2 and 3, subject to country rules 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n) 5.15GHz - 5.85GHz

(dependent on country) 2.400 - 2.4835GHz (dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) CCK, DQPSK, DBPSK 2.4GHz ISM: Orthogonal Frequency Division Multiplexing

(OFDM) All channels as defined by the relevant specification and country rules. Spatial streams N/A Intel Tri-Band Wireless-AC 18265 Data Rates All data rates are theoretical maximums. IEEE 802.11ac Data Rates IEEE 802.11ad Data Rates Up to 867 Mbps 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps specs.htm[8/25/2022 4:59:28 PM]

Specifications IEEE 802.11b Data Rates Security 11, 5.5, 2, 1 Mbps Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP WPA2-PSK, AES-CCMP Wi-Fi Direct*

Encryption and Authentication Compliance Product Safety UL, C-UL, CB (IEC 60950-1) Intel Wireless Gigabit Sink W13100 Form Factors M.2 Type 3030 Electrical interfaces M.2 Key 1-DP: 2xPCIe, USB, DP. Interface to Intel Wireless Gigabit-Antenna M10041 Module using X-FL, and one dedicated for Bluetooth Antenna Interface Connector X.FL Antenna Diversity On-board diversity IEEE 802.11 Networking Standards 802.11ac, 802.11ad, 802.11abgn, 802.11a, 802.11d, 802.11e, 802.11i, 802.11h, 802.11w Operating Temperature

(Adapter Shield) 0 to +80 degrees Celsius Humidity Frequency Modulation 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 60GHz (802.11ad) Frequency band 57GHz - 64GHz (dependent on country) Modulation DPSK, BPSK, QPSK, 16 QAM, Wireless Medium DMG control PHY, DMG SC PHY Channels 1, 2 and 3, subject to country rules Spatial streams Intel Wireless Gigabit Sink W13100 Data Rates All data rates are theoretical maximums. IEEE 802.11ad Data Rates Over-the-Air Security 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps Authentication WPA2-Personal (WSC - WiFi Simple Configuration) Encryption 128-bit AES-GCMP Additional Crypto Functions Public Key Decrypt RSA-2048 General Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standby Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Cisco Compatible Extensions, v4.0 specs.htm[8/25/2022 4:59:28 PM]

Specifications Intel Wireless Gigabit 11000 Dimensions 20.5 mm x 14.2 mm x 1.8 mm (shield included) Weight 2 grams Electrical interfaces Soldered module has a proprietary land plan. Interface to Intel Wireless Gigabit Antenna-M 10042R using X-FL (single coax cable to carry power, IF and control) Antenna Interface Connector X.FL Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) Humidity Frequency Modulation 802.11ad 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 60GHz (802.11ad) Frequency band 57GHz - 64GHz (dependent on country) Modulation Channels DPSK, BPSK, QPSK, 16 QAM, 1, 2 and 3, subject to country rules Data Rates All data rates are theoretical maximums. IEEE 802.11ad Data Rates Over-the-Air Security 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps Authentication WPA2-Personal (WSC - WiFi Simple Configuration) Encryption 128-bit AES-GCMP Additional Crypto Functions Public Key Decrypt RSA-2048 General Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standby, Microsoft Windows 10* with connected standby Intel Wireless Gigabit Sink W13110VR Dimensions (H x W x D) M.2 4230: 42 mm x 30 mm x 2.6 mm [1.5 mm Max (Top Side)/ 0.1 mm Max (Bottom Side)]

Weight 5.16 grams Radio ON/OFF Control Electrical interfaces Hardware Support M.2 Key G (User Defined). Interface to Intel Wireless Gigabit Antenna-M 10101 Module using X-FL (single coax cable to carry power, IF and control), up to 2 modules LEDs & GPIO Support Driving 2 LEDs or Multicolor LED with 4 states, Recovery button, Activity button with configurable action Antenna Diversity On-board diversity IEEE 802.11 Networking Standards 802.11ad specs.htm[8/25/2022 4:59:28 PM]

Specifications Operating Temperature

(Adapter Shield) Humidity Non-

Operating Frequency Modulation 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 60GHz (802.11ad) Frequency band 57GHz - 64GHz (dependent on country) Modulation Channels DPSK, BPSK, QPSK, 16 QAM, 1, 2 and 3, subject to country rules Data Rates All data rates are theoretical maximums. IEEE 802.11ad Data Rates 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps Operating Systems None Wi-Fi Alliance*

certification N/A Over-the-Air Security Authentication WPA2-Personal (WSC - WiFi Simple Configuration) Encryption 128-bit AES-GCMP Additional Crypto Functions Public Key Decrypt RSA-2048 Intel Wireless Gigabit Antenna-M 10101R Module Dimensions (H x W x D) Weight Antenna Connector Interface Operating Temperature

(Adapter Shield) Humidity Non-

Operating 7 mm x 19.3 mm x 1.8 mm 1 gram X.FL 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Intel Wireless Gigabit 11100VR Dimensions (H x W x D) 20.5 mm x 14.2 mm x 1.8 mm (shield included) Weight 2 grams Radio ON/OFF Control Electrical interfaces LED Output IEEE 802.11 Networking Standards Operating Temperature

(Adapter Shield) Supported in both hardware and software Soldered module has a proprietary land plan. Interface to Intel Wireless Gigabit Antenna-M 10042 Module using X-FL (single coax cable to carry power, IF and control) On/Off 802.11ad 0 to +80 degrees Celsius specs.htm[8/25/2022 4:59:28 PM]

Specifications Humidity Non-

Operating Frequency Modulation 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) 60GHz (802.11ad) Frequency band 57GHz - 64GHz (dependent on country) Modulation Channels DPSK, BPSK, QPSK, 16 QAM, 1, 2 and 3, subject to country rules Data Rates All data rates are theoretical maximums. IEEE 802.11ad Data Rates 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps Operating Systems Microsoft Windows 10* with connected standby Over-the-Air Security Authentication WPA2-Personal (WSC - WiFi Simple Configuration) Encryption 128-bit AES-GCMP Additional Crypto Functions Public Key Decrypt RSA-2048 Intel Wireless Gigabit Antenna-M 10042R Module Dimensions (H x W x D) Weight Antenna Connector Interface Operating Temperature

(Adapter Shield) Humidity Non-

Operating 7.5 mm x 24.5 mm x 1.8 mm 1 gram X.FL 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Intel Wi-Fi 6 AX101 (AX101NGW/AX101D2W) General Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom side)]

M.2 1216: 12 mm x 16 mm x 1.65 (0.05) mm Weight M.2 2230: 2.33 (0.3) g M.2 1216: 0.61 (0.1) g Supported Supported M.2: CNVio2 0 to +80 degrees Celsius Antenna Diversity Radio ON/OFF Control Connector Interface Operating Temperature

(Adapter Shield) specs.htm[8/25/2022 4:59:28 PM]

Specifications Humidity Operating Systems 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 10*, Linux*, Chrome OS*

Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* 6, Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA*, WPA2*, WPA3*, WPS*, PMF*, Wi-Fi Direct*, Wi-Fi Agile Multiband*, Wi-Fi Optimized Connectivity*, Wi-Fi Location*, and Wi-Fi TimeSync*

IEEE WLAN Standard Bluetooth Security IEEE 802.11-2016 and select amendments (selected feature coverage) IEEE 802.11a,b,d,e,g,h,i,k,n,r,u,v,w,ac,ax; Fine Timing Measurement based on 802.11-2016 Bluetooth* 5.1 Authentication WPA* and WPA2* Personal and Enterprise; WPA3* (pending OS support) Authentication Protocols 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-

AKA') Encryption 64-bit and 128-bit WEP, TKIP, 128-bit AES-CCMP, 256-bit AES-GCMP Compliance Regulatory For a list of country approvals, please contact your local Intel representatives. US Government FIPS 140-2 Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models AX101NGW Wi-Fi 6 (802.11ax) 1x1 80MHz, Bluetooth* 5.1, M.2 2230, Antenna Diversity AX101D2W Wi-Fi 6 (802.11ax) 1x1 80MHz, Bluetooth* 5.1, M.2 1216, Antenna Diversity Intel Wi-Fi 6 AX200 (AX200NGW/AX200D2WL) General Dimensions

(H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom side)]

M.2 1216: 12 mm x 16 mm x 1.65 (0.05) mm Weight M.2 2230: 2.33 (0.3) g M.2 1216: 0.61 (0.1) g Antenna Diversity Supported Radio ON/OFF Control Supported Connector Interface Operating Temperature

(Adapter Shield) Humidity Operating Systems Wi-Fi Alliance*

certification M.2: PCIe, USB 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 10*, Linux*, Chrome OS*

Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*, WPS*, PMF*, Wi-Fi Direct*, Wi-Fi Miracast*, Wi-Fi Agile Multiband*, Wi-Fi Optimized Connectivity*, Wi-Fi Location*, Passpoint*, Wi-Fi Aware*, and Wi-Fi TimeSync*

specs.htm[8/25/2022 4:59:28 PM]

Specifications IEEE WLAN Standard IEEE 802.11-2016 and select amendments (selected feature coverage) IEEE 802.11a, b, g, n, ac, ax, d, e, h, i, k, r, u, v, w, ai; Fine Timing Measurement based on 802.11-2016 Bluetooth Bluetooth* 5 Security Authentication WPA* and WPA2* Personal and Enterprise; WPA3* (pending OS support) Authentication Protocols 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-

AKA') Encryption 64-bit and 128-bit WEP, TKIP, 128-bit AES-CCMP, 256-bit AES-GCMP Compliance Regulatory For a list of country approvals, please contact your local Intel representatives. US Government Product Safety FIPS 140-2, FISMA UL, C-UL, CB (IEC 60950-1) Model Numbers Models AX200NGW AX200D2WL 802.11ax, 2x2, Bluetooth* 5, M.2 2230 802.11ax, 2x2, Bluetooth* 5, M.2 1216; LTE Coexistence Frequency Modulation Frequency band Modulation 5GHz (802.11a/n/ac/ax) 2.4GHz (802.11b/g/n/ax) 5.15GHz - 5.895GHz 2.400 - 2.4835GHz

(dependent on country)

(dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM CCK, DQPSK, DBPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiple Access (OFDMA) 2.4GHz ISM: Orthogonal Frequency Division Multiple Access (OFDMA) Channels All channels as defined by the relevant specification and country rules. Data Rates All data rates are theoretical maximums. IEEE 802.11ax Data Rates IEEE 802.11ac Data Rates Up to 2.4 Gbps Up to 867 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wi-Fi 6 AX201 (AX201NGW/AX201D2W/AX201D2WL) General specs.htm[8/25/2022 4:59:28 PM]

Specifications Dimensions

(H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom side)]

M.2 1216: 12 mm x 16 mm x 1.65 (0.05) mm Weight M.2 2230: 2.33 (0.3) g M.2 1216: 0.61 (0.1) g Radio ON/OFF Control Supported Connector Interface Operating Temperature

(Adapter Shield) Humidity Operating Systems Wi-Fi Alliance*

certification IEEE WLAN Standard M.2: CNVio2 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 10*, Linux*, Chrome OS*

Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*, WPS*, PMF*, Wi-Fi Direct*, Wi-Fi Miracast*, Wi-Fi Agile Multiband*, Wi-Fi Optimized Connectivity*, Wi-Fi Location*, Passpoint*, Wi-Fi Aware*, and Wi-Fi TimeSync*

IEEE 802.11-2016 and select amendments (selected feature coverage) IEEE 802.11a, b, g, n, ac, ax, d, e, h, i, k, r, u, v, w, ai; Fine Timing Measurement based on 802.11-2016 Bluetooth Bluetooth* 5 Security Authentication WPA* and WPA2* Personal and Enterprise; WPA3* (pending OS support) Authentication Protocols 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-

AKA') Encryption 64-bit and 128-bit WEP, TKIP, 128-bit AES-CCMP, 256-bit AES-GCMP Compliance Regulatory For a list of country approvals, please contact your local Intel representatives. US Government Product Safety FIPS 140-2, FISMA UL, C-UL, CB (IEC 60950-1) Model Numbers Models Model AX201NGW 802.11ax, 2x2, Bluetooth* 5, M.2 2230 AX201D2W AX201D2WL 802.11ax, 2x2, Bluetooth* 5, M.2 1216 802.11ax, 2x2, Bluetooth* 5, M.2 1216; LTE Coexistence 5GHz (802.11a/n/ac/ax) 2.4GHz (802.11b/g/n/ax) 5.15GHz - 5.895GHz 2.400 - 2.4835GHz

(dependent on country)

(dependent on country) BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM CCK, DQPSK, DBPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM Frequency Modulation Frequency band Modulation Wireless 5GHz UNII: Orthogonal Frequency Division 2.4GHz ISM: Orthogonal Frequency Division specs.htm[8/25/2022 4:59:28 PM]

Specifications Medium Multiple Access (OFDMA) Multiple Access (OFDMA) Channels All channels as defined by the relevant specification and country rules. Data Rates All data rates are theoretical maximums. IEEE 802.11ax Data Rates IEEE 802.11ac Data Rates Up to 2.4 Gbps Up to 867 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wi-Fi 6 AX203 (AX203NGW/AX203D2W) General Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom side)]

M.2 1216: 12 mm x 16 mm x 1.65 (0.05) mm Weight M.2 2230: 2.33 (0.3) g M.2 1216: 0.61 (0.1) g Radio ON/OFF Control Supported Connector Interface Operating Temperature

(Adapter Shield) Humidity Operating Systems M.2: CNVio2 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 10*, Linux*, Chrome OS*

Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* 6, Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA*, WPA2*, WPA3*, WPS*, PMF*, Wi-Fi Direct*, Wi-Fi Agile Multiband*, Wi-Fi Optimized Connectivity*, Wi-Fi Location*, and Wi-Fi TimeSync*

IEEE WLAN Standard Bluetooth Security IEEE 802.11-2016 and select amendments (selected feature coverage) IEEE 802.11a,b,d,e,g,h,i,k,n,r,u,v,w,ac,ax; Fine Timing Measurement based on 802.11-2016 Bluetooth* 5.1 Authentication WPA* and WPA2* Personal and Enterprise; WPA3* (pending OS support) Authentication Protocols 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-

AKA') specs.htm[8/25/2022 4:59:28 PM]

Specifications Encryption 64-bit and 128-bit WEP, TKIP, 128-bit AES-CCMP, 256-bit AES-GCMP Compliance Regulatory For a list of country approvals, please contact your local Intel representatives. US Government FIPS 140-2 Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models AX203NGW Wi-Fi 6 (802.11ax) 2x2 80MHz, Bluetooth* 5.1, M.2 2230 AX203D2W Wi-Fi 6 (802.11ax) 2x2 80MHz, Bluetooth* 5.1, M.2 1216 Intel Wi-Fi 6 AX204 (AX204NGW/AX204D2W) General Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max

(bottom side)]

M.2 1216: 12 mm x 16 mm x 1.65 (0.05) mm Weight M.2 2230: 2.33 (0.3) g M.2 1216: 0.61 (0.1) g Radio ON/OFF Control Supported Connector Interface M.2: CNVio2 Operating Temperature

(Adapter Shield) 0 to +80 degrees Celsius Humidity 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Operating Systems Wi-Fi Alliance*

certification Microsoft Windows 10*

Microsoft Windows 11*

Linux* (limited feature support) Chrome OS*

Wi-Fi CERTIFIED* 6 Wi-Fi CERTIFIED* a/b/g/n/ac WMM*

WMM-Power Save*

WPA*

WPA2*

WPA3*

WPS*

PMF*

Wi-Fi Direct*

Wi-Fi Agile Multiband*

Wi-Fi TimeSync*

IEEE WLAN Standard IEEE 802.11-2016 and select amendments (selected feature coverage) IEEE 802.11a, b, d, e, g, h, i, k, n, r, u, v, w, ac, ax; Fine Timing Measurement based on 802.11-2016 Bluetooth Bluetooth* 5.2 Security Features Security Methods WPA2* Personal and Enterprise; WPA3*

specs.htm[8/25/2022 4:59:28 PM]

Specifications Authentication Protocols 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-AKA') Encryption 128-bit AES-CCMP, 256-bit AES-GCMP Compliance Regulatory For a list of country approvals, please contact your local Intel representatives. US Government FIPS 140-2 Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models AX204NGW AX204D2W Wi-Fi 6 (80211ax R2), 2x2, Bluetooth*

5.2, M.2 2230 Wi-Fi 6 (80211ax R2), 2x2, Bluetooth*

5.2, M.2 1216 Frequency Modulation 5GHz (802.11a/n/ac/ax) 2.4GHz (802.11b/g/n/ax) Frequency band 5.15GHz - 5.895GHz 2.400 - 2.4835GHz

(dependent on country)

(dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM CCK, DQPSK, DBPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiple Access (OFDMA) 2.4GHz ISM: Orthogonal Frequency Division Multiple Access (OFDMA) Channels All channels as defined by the relevant specification and country rules. Data Rates All data rates are theoretical maximums. IEEE 802.11ax Data Rates IEEE 802.11ac Data Rates Up to 2.4 Gbps Up to 867 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wi-Fi 6E AX210 (AX210NGW/AX210D2W) General Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom side)]

M.2 1216: 12 mm x 16 mm x 1.65 (0.08) mm Weight M.2 2230: 2.33 (0.3) g M.2 1216: 0.61 (0.1) g Radio ON/OFF Control Supported Connector M.2: PCIe, USB specs.htm[8/25/2022 4:59:28 PM]

Specifications Interface Operating Temperature

(Adapter Shield) Humidity Operating Systems 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 10*, Linux*

Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA2*, WPA3*, WPS*, PMF*, Wi-Fi Direct*, Wi-Fi Agile Multiband* and Wi-Fi TimeSync*

IEEE WLAN Standard IEEE 802.11-2016 and select amendments (selected feature coverage) IEEE 802.11a, b, g, n, ac, ax, d, e, h, i, k, r, u, v, w; Fine Timing Measurement based on 802.11-2016 802.11-2016, Wi-Fi Location R2 (802.11az) HW readiness Bluetooth Security Bluetooth* 5.2 Authentication WPA2* and WPA3*

Authentication Protocols 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-

AKA') Encryption 128-bit AES-CCMP, 256-bit AES-GCMP Compliance Regulatory For a list of country approvals, please contact your local Intel representatives. US Government FIPS 140-2 Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models Frequency Modulation AX210NGW AX210D2W Wi-Fi 6E (6GHz), 2x2, Bluetooth* 5.2, M.2 2230 Wi-Fi 6E (6GHz), 2x2, Bluetooth* 5.2, M.2 1216 6-7GHz (802.11ax R2) 5GHz (802.11a/n/ac/ax) 2.4GHz (802.11b/g/n/ax) Frequency band FCC: 5.925GHz-7.125GHz 5.15GHz - 5.895GHz 2.400 - 2.4835GHz EU: 5925GHz- 6.425GHz

(dependent on country)

(dependent on country)

(dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM CCK, DQPSK, DBPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM Wireless Medium 6-7GHz: Orthogonal Frequency Division Multiple Access (OFDMA) 5GHz UNII: Orthogonal Frequency Division Multiple Access (OFDMA) 2.4GHz ISM: Orthogonal Frequency Division Multiple Access (OFDMA) Channels All channels as defined by the relevant specification and country rules. Data Rates All data rates are theoretical maximums. IEEE 802.11ax Data Rates IEEE 802.11ac Data Rates Up to 2.4 Gbps Up to 867 Mbps IEEE 802.11n Data Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a 54, 48, 36, 24, 18, 12, 9, 6 Mbps specs.htm[8/25/2022 4:59:28 PM]

Specifications Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wi-Fi 6E AX211

(AX211NGW/AX211D2W/AX211D2WH/AX211D2WL) General Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom side)]

M.2 1216: 12 mm x 16 mm x 1.7 (0.1) mm Weight M.2 2230: 2.83 (0.3) g M.2 1216: 0.67 (0.1) g Radio ON/OFF Control Supported Connector Interface Operating Temperature

(Adapter Shield) Humidity Operating Systems M.2: CNVio2 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 10*, Linux*

Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA3*, PMF*, Wi-Fi Direct*, and Wi-Fi Agile Multiband*

IEEE WLAN Standard IEEE 802.11-2016 and select amendments (selected feature coverage) IEEE 802.11a, b, g, n, ac, ax, d, e, h, i, k, r, u, v, w; Fine Timing Measurement based on 802.11-2016 Wi-Fi Location R2 (802.11az) HW readiness Bluetooth Security Bluetooth* 5.2 Authentication WPA2* and WPA3*

Authentication Protocols 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-

AKA') Encryption 128-bit AES-CCMP, 256-bit AES-GCMP Compliance Regulatory For a list of country approvals, please contact your local Intel representatives. US Government FIPS 140-2 Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models AX211NGW AX211D2W Wi-Fi 6E (6GHz), 2x2, Bluetooth* 5.2, M.2 2230 Wi-Fi 6E (6GHz), 2x2, Bluetooth* 5.2, M.2 1216 specs.htm[8/25/2022 4:59:28 PM]

Specifications Frequency Modulation AX211D2WH AX211D2WL Wi-Fi 6E (6GHz), 2x2, Bluetooth* 5.2, M.2 1216 Wi-Fi 6E (6GHz), 2x2, Bluetooth* 5.2, M.2 1216, LTE Coex 6-7GHz (802.11ax R2) 5GHz (802.11a/n/ac/ax) 2.4GHz (802.11b/g/n/ax) Frequency band FCC: 5.925GHz-7.125GHz 5.15GHz - 5.895GHz 2.400 - 2.4835GHz EU: 5925GHz- 6.425GHz

(dependent on country)

(dependent on country)

(dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM CCK, DQPSK, DBPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM Wireless Medium 6-7GHz: Orthogonal Frequency Division Multiple Access (OFDMA) 5GHz UNII: Orthogonal Frequency Division Multiple Access (OFDMA) 2.4GHz ISM: Orthogonal Frequency Division Multiple Access (OFDMA) Channels All channels as defined by the relevant specification and country rules. Data Rates All data rates are theoretical maximums. IEEE 802.11ax Data Rates IEEE 802.11ac Data Rates IEEE 802.11n Data Rates IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Up to 2.4 Gbps Up to 867 Mbps Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps Intel Wi-Fi 6E AX411 (AX411NGW/AX411E2W) General Dimensions (H x W x D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom side)]

M.2 1625: 16 mm x 25 mm x 2.0 mm Weight M.2 2230: 2.83 (0.3) g M.2 1625: 0.90 (0.1) g Radio ON/OFF Control Supported Connector Interface Operating Temperature

(Adapter Shield) Humidity Operating M.2: CNVio2 0 to +80 degrees Celsius 50% to 90% RH non-condensing (at temperatures of 25 C to 35 C) Microsoft Windows 10*, Linux*

specs.htm[8/25/2022 4:59:28 PM]

Specifications Systems Wi-Fi Alliance*

certification Wi-Fi CERTIFIED* 6, Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA3*, PMF*, Wi-Fi Direct*, and Wi-Fi Agile Multiband*

IEEE WLAN Standard IEEE 802.11-2016 and select amendments (selected feature coverage) IEEE 802.11a, b, g, n, ac, ax, d, e, h, i, k, r, u, v, w; Fine Timing Measurement based on 802.11-2016 Wi-Fi Location R2 (802.11az) HW readiness Bluetooth Security Bluetooth* 5.2 Authentication WPA2* and WPA3*

Authentication Protocols 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-

AKA') Encryption 128-bit AES-CCMP, 256-bit AES-GCMP Compliance Regulatory For a list of country approvals, please contact your local Intel representatives. US Government FIPS 140-2 Product Safety UL, C-UL, CB (IEC 60950-1) Model Numbers Models Frequency Modulation AX411NGW AX411E2W Wi-Fi 6E (6GHz), 2x2, Bluetooth* 5.2, M.2 2230 Wi-Fi 6E (6GHz), 2x2, Bluetooth* 5.2, M.2 1625 6-7GHz (802.11ax R2) 5GHz (802.11a/n/ac/ax) 2.4GHz (802.11b/g/n/ax) Frequency band FCC: 5.925GHz-7.125GHz 5.15GHz - 5.895GHz 2.400 - 2.4835GHz EU: 5925GHz- 6.425GHz

(dependent on country)

(dependent on country)

(dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM CCK, DQPSK, DBPSK, 16 QAM, 64 QAM, 256 QAM, 1024 QAM Wireless Medium 6-7GHz: Orthogonal Frequency Division Multiple Access (OFDMA) 5GHz UNII: Orthogonal Frequency Division Multiple Access (OFDMA) 2.4GHz ISM: Orthogonal Frequency Division Multiple Access (OFDMA) Channels All channels as defined by the relevant specification and country rules. Data Rates All data rates are theoretical maximums. Up to 2.4 Gbps Up to 867 Mbps Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps IEEE 802.11ax Data Rates IEEE 802.11ac Data Rates IEEE 802.11n Data Rates IEEE 802.11a Data Rates IEEE 802.11g Data Rates IEEE 802.11b Data Rates Back to Top specs.htm[8/25/2022 4:59:28 PM]

Specifications Back to Contents Trademarks and Disclaimers specs.htm[8/25/2022 4:59:28 PM]

Customer Support Back to Contents Customer Support Intel support is available online or by telephone. Available services include the most up-to-date product information, installation instructions about specific products, and troubleshooting tips. Online Support Technical Support: http://www.intel.com/support Network Product Support: http://www.intel.com/network Corporate Web Site: http://www.intel.com Back to Top Back to Contents Trademarks and Disclaimers support.htm[8/25/2022 4:59:30 PM]

Warranty Information Back to Contents Warranty Information One-Year Limited Hardware Warranty Limited Warranty In this warranty statement, the term "Product" applies to the wireless adapters listed in Specifications. Intel warrants to the purchaser of the Product that the Product, if properly used and installed, will be free from defects in material and workmanship and will substantially conform to Intels publicly available specifications for the Product for a period of one (1) year beginning on the date the Product was purchased in its original sealed packaging. SOFTWARE OF ANY KIND DELIVERED WITH OR AS PART OF THE PRODUCT IS EXPRESSLY PROVIDED "AS IS", SPECIFICALLY EXCLUDING ALL OTHER WARRANTIES, EXPRESS, IMPLIED (INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE), provided however, that Intel warrants that the media on which the software is furnished will be free from defects for a period of ninety (90) days from the date of delivery. If such a defect appears within the warranty period, you may return the defective media to Intel for replacement or alternative delivery of the software at Intel's discretion and without charge. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the software. If the Product which is the subject of this Limited Warranty fails during the warranty period for reasons covered by this Limited Warranty, Intel, at its option, will:

REPAIR the Product by means of hardware and/or software; OR REPLACE the Product with another product, OR, if Intel is unable to repair or replace the Product, REFUND the then-current Intel price for the Product at the time a claim for warranty service is made to Intel under this Limited Warranty. THIS LIMITED WARRANTY, AND ANY IMPLIED WARRANTIES THAT MAY EXIST UNDER APPLICABLE STATE, NATIONAL, PROVINCIAL OR LOCAL LAW, APPLY ONLY TO YOU AS THE ORIGINAL PURCHASER OF THE PRODUCT. Extent of Limited Warranty Intel does not warrant that the Product, whether purchased stand-alone or integrated with other products, including without limitation, semi-conductor components, will be free from design defects or errors known as "errata." Current characterized errata are available upon request. Further, this Limited Warranty does NOT cover: (i) any costs associated with the replacement or repair of the Product, including labor, installation or other costs incurred by you, and in particular, any costs relating to the removal or replacement of any Product soldered or otherwise permanently affixed to any printed circuit board or integrated with other products; (ii) damage to the Product due to external causes, including accident, problems with electrical power, abnormal, mechanical or environmental conditions, usage not in accordance with product instructions, misuse, neglect, accident, abuse, alteration, repair, improper or unauthorized installation or improper testing, or (iii) any Product which has been modified or operated outside of Intels publicly available specifications or where the original product identification markings (trademark or serial number) have been removed, altered or obliterated from the Product; or (iv) issues resulting from modification

(other than by Intel) of software products provided or included in the Product, (v) incorporation of software products, other than those software products provided or included in the Product by Intel, or (vi) failure to apply Intel-supplied modifications or corrections to any software provided with or included in the Product. How to Obtain Warranty Service To obtain warranty service for the Product, you may contact your original place of purchase in accordance with its instructions or you may contact Intel. To request warranty service from Intel, you must contact the Intel Customer Support ("ICS") center in your region (http://www.intel.com/support/wireless/) within the warranty period during normal business hours (local time), excluding holidays and return the Product to the designated ICS center. Please be prepared to provide: (1) your name, mailing address, email address, telephone numbers and, in the USA, valid warranty.htm[8/25/2022 4:59:30 PM]

Warranty Information credit card information; (2) proof of purchase; (3) model name and product identification number found on the Product; and (4) an explanation of the problem. The Customer Service Representative may need additional information from you depending on the nature of the problem. Upon ICS's verification that the Product is eligible for warranty service, you will be issued a Return Material Authorization ("RMA") number and provided with instructions for returning the Product to the designated ICS center. When you return the Product to the ICS center, you must include the RMA number on the outside of the package. Intel will not accept any returned Product without an RMA number, or that has an invalid RMA number, on the package. You must deliver the returned Product to the designated ICS center in the original or equivalent packaging, with shipping charges pre-paid (within the USA), and assume the risk of damage or loss during shipment. Intel may elect to repair or replace the Product with either a new or reconditioned Product or components, as Intel deems appropriate. The repaired or replaced product will be shipped to you at the expense of Intel within a reasonable period of time after receipt of the returned Product by ICS. The returned Product shall become Intels property on receipt by ICS. The replacement product is warranted under this written warranty and is subject to the same limitations of liability and exclusions for ninety (90) days or the remainder of the original warranty period, whichever is longer. If Intel replaces the Product, the Limited Warranty period for the replacement Product is not extended. WARRANTY LIMITATIONS AND EXCLUSIONS THIS WARRANTY REPLACES ALL OTHER WARRANTIES FOR THE PRODUCT AND INTEL DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, COURSE OF DEALING AND USAGE OF TRADE. Some states (or jurisdictions) do not allow the exclusion of implied warranties so this limitation may not apply to you. ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD. Some states (or jurisdictions) do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. LIMITATIONS OF LIABILITY INTELS RESPONSIBILITY UNDER THIS OR ANY OTHER WARRANTY, IMPLIED OR EXPRESS, IS LIMITED TO REPAIR, REPLACEMENT OR REFUND, AS SET FORTH ABOVE. THESE REMEDIES ARE THE SOLE AND EXCLUSIVE REMEDIES FOR ANY BREACH OF WARRANTY. TO THE MAXIMUM EXTENT PERMITTED BY LAW, INTEL IS NOT RESPONSIBLE FOR ANY DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY (INCLUDING WITHOUT LIMITATION, LOST PROFITS, DOWNTIME, LOSS OF GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH A SYSTEM CONTAINING THE PRODUCT), EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states (or jurisdictions) do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE OR JURISDICTION. ANY AND ALL DISPUTES ARISING UNDER OR RELATED TO THIS LIMITED WARRANTY SHALL BE ADJUDICATED IN THE FOLLOWING FORUMS AND GOVERNED BY THE FOLLOWING LAWS: FOR THE UNITED STATES OF AMERICA, CANADA, NORTH AMERICA AND SOUTH AMERICA, THE FORUM SHALL BE SANTA CLARA, CALIFORNIA, USA AND THE APPLICABLE LAW SHALL BE THAT OF THE STATE OF DELAWARE. FOR THE ASIA PACIFIC REGION (EXCEPT FOR MAINLAND CHINA), THE FORUM SHALL BE SINGAPORE AND THE APPLICABLE LAW SHALL BE THAT OF SINGAPORE. FOR EUROPE AND THE REST OF THE WORLD, THE FORUM SHALL BE LONDON AND THE APPLICABLE LAW SHALL BE THAT OF ENGLAND AND WALES IN THE EVENT OF ANY CONFLICT BETWEEN THE ENGLISH LANGUAGE VERSION AND ANY OTHER TRANSLATED VERSION(S)OF THIS LIMITED WARRANTY (WITH THE EXCEPTION OF THE SIMPLIFIED CHINESE VERSION), THE ENGLISH LANGUAGE VERSION SHALL CONTROL. IMPORTANT! UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS SOLD HEREUNDER ARE NOT DESIGNED, OR INTENDED FOR USE IN ANY MEDICAL, LIFE SAVING OR LIFE SUSTAINING SYSTEMS, TRANSPORTATION SYSTEMS, NUCLEAR SYSTEMS, OR FOR ANY OTHER MISSION CRITICAL APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. WEEE warranty.htm[8/25/2022 4:59:30 PM]

Warranty Information Back to Top Back to Contents Trademarks and Disclaimers warranty.htm[8/25/2022 4:59:30 PM]

 

 

Intel WiFi Adapter Information Guide This version of Intel PROSet/Wireless WiFi Software is compatible with the adapters listed below. Note that newer features provided in this software are generally not supported on older generations of wireless adapters. The following adapters are supported in Windows* 10:

Intel Wi-Fi 6E AX211 Intel Wi-Fi 6E AX210 Intel Wi-Fi 6 AX203 Intel Wi-Fi 6 AX201 Intel Wi-Fi 6 AX200 Intel Wi-Fi 6 AX101 I With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internet connection. All these features can be explored using a WiFi network in your home or office. This WiFi network solution is designed for both home and business use. Additional users and features can be added as your networking needs grow and change. This guide contains basic information about Intel adapters. Intel wireless adapters enable fast connectivity without wires for desktop and notebook PCs. Depending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac and 802.11ax wireless standards. Operating at 2.4GHz, 5GHz or 6GHz frequency, you can now connect your computer to existing high-speed networks that use multiple access points within large or small environments. Your WiFi adapter maintains automatic data rate control according to the access point location and signal strength to achieve the fastest possible connection. Information in this document is subject to change without notice. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein. IMPORTANT NOTICE FOR ALL USERS OR DISTRIBUTORS:

Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all necessary local and governmental regulatory agency requirements for the regions that they are designated and/or marked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars, satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, and limit usage to avoid interference with these devices. In many instances Intel is required to provide test data to prove regional and local compliance to regional and governmental regulations before certification or approval to use the product is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully control parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include, without limitation, RF power, spectrum usage, channel scanning, and human exposure. For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format with the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, or code with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches, utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will be solely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under any theory of liability for any issues associated with the modified products, including without limitation, claims under the warranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assist in providing support to any third parties for such modified products. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others. Intel Corporation. Regulatory Information This section provides regulatory information for the following wireless adapters:

Intel Wi-Fi 6 AX200 Intel Wi-Fi 6 AX201 Intel Wi-Fi 6 AX203 Intel Wi-Fi 6E AX210 Intel Wi-Fi 6E AX211 Intel Wi-Fi 6E AX101 NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above. The following information is provided:

Information for the User Regulatory Information Regulatory ID Information for OEMs and Host Integrators NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 and similar standards), the information provided herein is subject to change. Intel Corporation assumes no responsibility for errors or omissions in this document. INFORMATION FOR THE USER Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use Warning: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic devices equipped with radio frequency devices (wireless adapters) because their signals could interfere with critical aircraft instruments. Caution: This device is prohibited against use for the control of or communications with unmanned aircraft systems, including drones Safety Approval Considerations This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:

- The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments.

- The use of wireless adapters on airplanes is governed by the Federal Aviation Administration

(FAA).

- The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. USA FCC Radio Frequency Exposure The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure requirements found in FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:

- Do not touch or move antenna while the unit is transmitting or receiving.

- Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting.

- Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio.

- Use in specific environments:

REGULATORY INFORMATION USA - Federal Communications Commission (FCC) This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 and 5.470 to 5.75GHz frequency ranges. No configuration controls are provided for Intel wireless adapters allowing any change in the frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC rules.

- Intel wireless adapters are intended for installation by OEM integrators only.

- Intel wireless adapters cannot be co-located with any other transmitter unless without further evaluation and acceptance by the FCC.

- Intel wireless adapters must be used with the same type of antenna with equal or less maximum gains from the original approval.

- No trace antenna designs permitted without additional evaluation and FCC approval.

- Intel wireless adapters are single modular approvals with no limited module conditions specified. This wireless adapter complies with Part 15.247 and 15.407 of the FCC Rules. Operation of the device is subject to the following two conditions:

- This device may not cause harmful interference.

- This device must accept any interference that may cause undesired operation. Class B Device Interference Statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

- Reorient or relocate the receiving antenna of the equipment experiencing the interference.

- Increase the distance between the wireless adapter and the equipment experiencing the interference. -

Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected.

- onsult the dealer or an experienced radio/TV technician for help. NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Modular Regulatory Certification Country Markings Intel Wi-Fi 6 AX200 (AX200NGW) USA: Model AX200NGW, FCC ID: PD9AX200NG Canada: Model AX200NGW, IC: 1000M-AX200NG Intel Wi-Fi 6 AX200 (AX200D2WL) Due to the very small size of the AX200D2WL, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA: Model AX200D2WL, FCC ID: PD9AX200D2L Canada: Model AX200D2WL, IC: 1000M-AX200D2L Intel Wi-Fi 6 AX201 (AX201NGW) USA: Model AX201NGW FCC ID: PD9AX201NG Canada: Model AX201NGW, IC: 1000M-AX201NG Intel Wi-Fi 6 AX201 (AX201D2W) Due to the very small size of the AX201D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA: Model AX210D2W FCC ID: PD9AX201D2 Canada: Model AX210D2W IC: 1000M-AX201D2 Intel Wi-Fi 6 AX201 (AX201D2WL) Due to the very small size of the AX201D2WL, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA: Model AX201D2WL, FCC ID: PD9AX201D2L Canada: Model AX201D2WL, IC: 1000M-AX201D2L Intel Wi-Fi 6 AX203 (AX203NGW) USA: Model AX203NGW, FCC ID: PD9AX203NG Canada: Model AX203NG, IC: 1000M-AX203NG Intel Wi-Fi 6 AX203 (AX203D2W) Due to the very small size of the AX203D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA: Model AX203D2W, FCC ID: PD9AX203D2 Canada: Model AX203D2W, IC: 1000M-AX203D2 Intel Wi-Fi 6 AX101 (AX101NGW) USA: Model AX101NGW, FCC ID: PD9AX101NG Canada: Model AX101G, IC: 1000M-AX101NG Intel Wi-Fi 6 AX101 (AX101D2W) Due to the very small size of the AX1091D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA: Model AX101D2W, FCC ID: PD9AX101D2 Canada: Model AX101D2W, IC: 1000M-AX101D2 Intel Wi-Fi 6E AX210 (AX210NGW) FCC ID: PD9AX210NG IC: 1000M-AX210NG Intel Wi-Fi 6E AX210 (AX210D2W) Due to the very small size of the AX210D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA: Model AX210D2W, FCC ID: PD9AX210D2 Canada: Model AX210D2W, IC: 1000M-AX210D2 Intel Wi-Fi 6E AX211 (AX211NGW) FCC ID: PD9AX211NG IC: 1000M-AX211NG Intel Wi-Fi 6E AX211 (AX211D2W) Due to the very small size of the AX211D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. USA: Model AX211D2W, FCC ID: PD9AX211D2 Canada: Model AX211D2W, IC: 1000M-AX211D2 Intel Wi-Fi 6E AX211 (AX211D2WL) Due to the very small size of the AX211D2WL, the marking has been placed in this user manual because the product label on the device is considered too small to be readable. FCC ID: PD9AX211D2L IC: 1000M-AX211D2L INFORMATION FOR OEMs and HOST INTEGRATORS The guidelines described within this document are provided to OEM integrators installing Intel wireless adapters in notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of compliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described herein are fulfilled the Intel wireless adapters may be incorporated into notebook and tablet PC host platforms with no further restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM or integrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible to determine the required host regulatory testing and/or obtaining the required host approvals for compliance.

- Intel wireless adapters are intended for installation by OEMs and host integrators only.

- The Intel wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval.

-The Intel wireless adapters must be operated with an access point that has been approved for the country of operation.

-Changes or modification to Intel wireless adapters by OEMs, integrators or other third parties is not permitted. Any changes or modification to Intel wireless adapters by OEMs, integrators or other third parties will void authorization to operate the adapter. Antenna Type and Gains Only antennas of the same type and with equal or less gains as shown in the tables below shall be used with the Intel wireless adapters. Other types of antennas and/or higher gain antennas may require additional authorization for operation. For testing purposes the following dual band antenna that approximates closely the above limits was used:

Simultaneous Transmission of Intel Wireless Adapters with Other Integrated or Plug-In Transmitters Based upon FCC Knowledge Database publication number 616217, when there are multiple transmitting devices installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements. OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessment to determine if any additional requirements for testing or FCC approval is necessary.a Antenna Placement Within the Host Platform To ensure RF exposure compliance the antenna(s) used with the Intel wireless adapters must be installed in notebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operating modes and orientations of the host platform, with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the antenna when installed in the host system. Any separation distances less than those shown will require additional evaluation and FCC authorization. For WiFi/Bluetooth combination adapters it is recommended that a 5 cm separation distance between transmitting antennas be provided within the host system to maintain an adequate separation ratio for simultaneous WiFi and Bluetooth transmission. For less than 5 cm separation the separation ratio must be verified according to FCC publication KDB 447498 for the specific adapter. Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use. Antenna Warnings: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic devices equipped with radio-frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments. Caution: This device is prohibited against use for the control of or communications with unmanned aircraft systems, including drones Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating the Intel wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label. The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Intel Corporation is not responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines. Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from permissible settings and restrictions in the country of use could be an infringement of national law and may be punished as such.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: Due to the small device size 12mm x 16mm it is too small to imprint the FCCID and IC ID on the module. The font size required would need to be < size 4 font and is considered to require magnification for legibility. The ID's will be placed in the Information Guide. External host labeling is still required once integrated into host. FCC ID: PD9AX101D2 IC: 1000M-AX101D2 Label Information Wireless Solutions Group Intel Confidential

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

July 20, 2023 Subject: Confidentiality Request for FCC ID: PD9AX101D2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term User's Manual Exhibit Intel Corporation has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to

"competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, Benjamin LAVENANT Regulatory Engineer Intel Corporation benjamin.lavenant@intel.com

 

 

Request for Modular/Limited Modular Approval April 23, 2023 Subject: Manufacturers Declaration for

- Modular Approval

- Limited Modular Approval

- Split Modular Approval

- Limited Split Modular Approval Confidentiality Request for: ______PD9AX101D2_____ 8 Basic Requirements FCC Part 15.212(a)(1) For Items Marked NO(*), the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i)

- YES - NO(*) Details: The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna connector. See photo provided with this filing. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii)

- YES - NO(*) Details: Data to the modulation circuit is buffered as described in the operational description provided with the application>

3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii)

- YES - NO(*) Details: The module contains its own power supply regulation. Please refer to operational description filed with this application 4. The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv)

- YES - NO(*) Details: The module connects to its antenna using an UFL connector which is considered a non-standard connector. The antenna and connector specification are provided with this filing. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v)

- YES X

- NO(*) Details: The module was tested in OEM host PC and is limited to installation in the host described in this filing. 053019-02a Modular Approval Requirement 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display (see Requirement Met KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: XYZMODEL1 or Contains FCC ID:

XYZMODEL1. Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC certified transmitter module(s). Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi)

- YES - NO(*) Details: There is a label on the module as shown in the labeling exhibit filed with this application. Host specific labeling instructions are shown in the installation manual .filed with this application. 7. The modular transmitter must comply with all specific rule or operating requirements applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 15.212(a)(1)(vii)

- YES - NO(*) Details: The module complies with FCC Part 15C requirements. Instructions to the OEM installer are provided in the installation manual filed with this application. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. 15.212(a)(1)(viii)

- YES - NO(*) Details: The module meets mobile/portable conditions levels as shown in the RF exposure test report filed with this application. 053019-02a Limited Module Description When Applicable

* If a module does NOT meet one or more of the above 8 requirements, the applicant may request Limited Modular Approval (LMA). This Limited Modular Approval (LMA) is applied with the understanding that the applicant will demonstrate and will retain control over the final installation of the device, such that compliance of the end product is always assured. The operating condition(s) for the LMA;

the module is only approved for use when installed in devices produced by grantee. A description regarding how control of the end product, into which the module will be installed, will be maintained by the applicant/manufacturer, such that full compliance of the end product is always ensured should be provided here. Details: The module was tested in the OEM host PC and is limited to installation in the PC described in this application. Software Considerations KDB 594280 / KDB 442812 (One of the following 2 items must be applied) Requirement 1. For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description must be provided about how such control is implemented to ensure prevention of third-party modification; see KDB Publication 594280. Requirement Met

- Provided in Separate Cover Letter

- N/A Details: The firmware of the device cannot be modified or adjusted by the end user as described in a separate cover letter filed with this application. 2. For Software Defined Radio (SDR) devices, transmitter module applications must provide a software security description; see KDB Publication 442812.

- Provided in Separate Cover Letter

- N/A Details: <example N/A>

Split Modular Requirements Requirement Provided in Manual 1. For split modular transmitters, specific descriptions for secure communications between front-end and control sections, including authentication and restrictions on third-party modifications; also, instructions to third-party integrators on how control is maintained.

- Provided in Separate Cover Letter

- N/A Details: <example N/A >

053019-02a OEM Integration Manual Guidance KDB 996369 D03 Section 2 Clear and Specific Instructions Describing the Conditions, Limitations, and Procedures for third-parties to use and/or integrate the module into a host device. Requirement Is this module intended for sale to third parties?

- YES

- No, If No, and LMA applies, the applicant can optionally choose to not make the following detailed info public. However there still needs to be basic integration instructions for a users manual and the information below must still be included in the operational description. If the applicant wishes to keep this info confidential, this will require a separate statement cover letter explaining the module is not for sale to third parties and that integration instructions are internal confidential documents. Items required to be in the manual See KDB 996369 D03, Section 2 As of May 1, 2019, the FCC requires ALL the following information to be in the installation manual. Modular transmitter applicants should include information in their instructions for all these items indicating clearly when they are not applicable. For example information on trace antenna design could indicate Not Applicable. Also if a module is limited to only a grantees own products and not intended for sale to third parties, the user instructions may not need to be detailed and the following items can be placed in the operational description, but this should include a cover letter as cited above. 1. List of applicable FCC rules. KDB 996369 D03, Section 2.2 a. Only list rules related to the transmitter. 2. Summarize the specific operational use conditions. KDB 996369 D03, Section 2.3 a. Conditions such as limits on antennas, cable loss, reduction of power for point to point 3. Limited Module Procedures. KDB 996369 D03, Section 2.4 systems, professional installation info a. Describe alternative means that the grantee uses to verify the host meets the necessary limiting conditions b. When RF exposure evaluation is necessary, state how control will be maintained such that compliance is ensured, such as Class II for new hosts, etc. 4. Trace antenna designs. KDB 996369 D03, Section 2.5 a. Layout of trace design, parts list, antenna, connectors, isolation requirements, tests for design verification, and production test procedures for ensuring compliance. If confidential, the method used to keep confidential must be identified and information provided in the operational description. 5. RF exposure considerations. KDB 996369 D03, Section 2.6 a. Clearly and explicitly state conditions that allow host manufacturers to use the module. Two types of instructions are necessary: first to the host manufacturer to define conditions (mobile, portable xx cm from body) and second additional text needed to be provided to the end user in the host product manuals. 6. Antennas. KDB 996369 D03, Section 2.7 a. List of antennas included in the application and all applicable professional installer instructions when applicable. The antenna list shall also identify the antenna types

(monopole, PIFA, dipole, etc note that omni-directional is not considered a type) 7. Label and compliance information. KDB 996369 D03, Section 2.8 a. Advice to host integrators that they need to provide a physical or e-label stating Contains FCC ID: with their finished product

- All Items shown to X the left are provided in the Modular Integration Guide (or UM) for Full Modular Approval (MA) or LMA. Therefore the a. 8. Information on test modes and additional testing requirements. KDB 996369 D03, Section 2.9 Test modes that should be taken into consideration by host integrators including clarifications necessary for stand-alone and simultaneous configurations. Provide information on how to configure test modes for evaluation 9. Additional testing, Part 15 Subpart B disclaimer. KDB 996369 D03, Section 2.10 b. Sincerely, By:

Sr. Regulatory Engineer __________________________

(Signature/Title1) Benjamin Lavenant_____________________

(Print name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate 053019-02a

 

 

Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Date : 4/25/2023 Ref: FCC Class II Permissive change for FCC ID: PD9AX101D2 Dear Examiner, This is to request a Class II permissive change for module approval FCC ID: PD9AX101D2, originally granted on 3/26/2021 for DSS, DTS, UNII and on 11/2/2022 for UNII-4. Change #1: Addition of a new antenna, antenna type is different with the original application for UNII-4 only.

(Antenna type: Dipole Antenna with a peak gain lower than the original certification in the 5.9 GHz band.) By:

________________________ Benjamin LAVENANT Regulatory Engineer Title:

On behalf of: Intel Corporation e-mail:

benjamin.lavenant@intel.com Intel Corporation 425 rue de Goa, Le Cargo 6 Antibes, 06600 France

 

 

Request for Modular/Limited Modular Approval June 20, 2022 Subject: Manufacturers Declaration for

- Modular Approval

- Limited Modular Approval

- Split Modular Approval

- Limited Split Modular Approval Confidentiality Request for: ______PD9AX101D2______ 8 Basic Requirements FCC Part 15.212(a)(1) For Items Marked NO(*), the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i)

- YES - NO(*) Details: The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna connector. See photo provided with this filing. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii)

- YES - NO(*) Details: Data to the modulation circuit is buffered as described in the operational description provided with the application>

3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii)

- YES - NO(*) Details: The module contains its own power supply regulation. Please refer to operational description filed with this application 4. The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv)

- YES - NO(*) Details: The module connects to its antenna using an UFL connector which is considered a non-standard connector. The antenna and connector specification are provided with this filing. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to X - YES the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v)

- NO(*) Details:

053019-02a Modular Approval Requirement 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display (see Requirement Met KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: XYZMODEL1 or Contains FCC ID:

XYZMODEL1. Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC certified transmitter module(s). Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi)

- YES - NO(*) Details: There is a label on the module as shown in the labeling exhibit filed with this application. Host specific labeling instructions are shown in the installation manual .filed with this application. 7. The modular transmitter must comply with all specific rule or operating requirements applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 15.212(a)(1)(vii)

- YES - NO(*) Details: The module complies with FCC Part 15C requirements. Instructions to the OEM installer are provided in the installation manual filed with this application. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. 15.212(a)(1)(viii)

- YES - NO(*) Details: The module meets mobile/portable conditions levels as shown in the RF exposure test report filed with this application. 053019-02a Limited Module Description When Applicable

* If a module does NOT meet one or more of the above 8 requirements, the applicant may request Limited Modular Approval (LMA). This Limited Modular Approval (LMA) is applied with the understanding that the applicant will demonstrate and will retain control over the final installation of the device, such that compliance of the end product is always assured. The operating condition(s) for the LMA;

the module is only approved for use when installed in devices produced by grantee. A description regarding how control of the end product, into which the module will be installed, will be maintained by the applicant/manufacturer, such that full compliance of the end product is always ensured should be provided here. Details:

Software Considerations KDB 594280 / KDB 442812 (One of the following 2 items must be applied) Requirement 1. For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description must be provided about how such control is implemented to ensure prevention of third-party modification; see KDB Publication 594280. Requirement Met

- Provided in Separate Cover Letter

- N/A Details: The firmware of the device cannot be modified or adjusted by the end user as described in a separate cover letter filed with this application. 2. For Software Defined Radio (SDR) devices, transmitter module applications must provide a software security description; see KDB Publication 442812.

- Provided in Separate Cover Letter

- N/A Details: <example N/A>

Split Modular Requirements Requirement Provided in Manual 1. For split modular transmitters, specific descriptions for secure communications between front-end and control sections, including authentication and restrictions on third-party modifications; also, instructions to third-party integrators on how control is maintained.

- Provided in Separate Cover Letter

- N/A Details: <example N/A >

053019-02a OEM Integration Manual Guidance KDB 996369 D03 Section 2 Clear and Specific Instructions Describing the Conditions, Limitations, and Procedures for third-parties to use and/or integrate the module into a host device. Requirement Is this module intended for sale to third parties?

- YES

- No, If No, and LMA applies, the applicant can optionally choose to not make the following detailed info public. However there still needs to be basic integration instructions for a users manual and the information below must still be included in the operational description. If the applicant wishes to keep this info confidential, this will require a separate statement cover letter explaining the module is not for sale to third parties and that integration instructions are internal confidential documents. Items required to be in the manual See KDB 996369 D03, Section 2 As of May 1, 2019, the FCC requires ALL the following information to be in the installation manual. Modular transmitter applicants should include information in their instructions for all these items indicating clearly when they are not applicable. For example information on trace antenna design could indicate Not Applicable. Also if a module is limited to only a grantees own products and not intended for sale to third parties, the user instructions may not need to be detailed and the following items can be placed in the operational description, but this should include a cover letter as cited above. 1. List of applicable FCC rules. KDB 996369 D03, Section 2.2 a. Only list rules related to the transmitter. 2. Summarize the specific operational use conditions. KDB 996369 D03, Section 2.3 a. Conditions such as limits on antennas, cable loss, reduction of power for point to point 3. Limited Module Procedures. KDB 996369 D03, Section 2.4 systems, professional installation info a. Describe alternative means that the grantee uses to verify the host meets the necessary limiting conditions b. When RF exposure evaluation is necessary, state how control will be maintained such that compliance is ensured, such as Class II for new hosts, etc. 4. Trace antenna designs. KDB 996369 D03, Section 2.5 a. Layout of trace design, parts list, antenna, connectors, isolation requirements, tests for design verification, and production test procedures for ensuring compliance. If confidential, the method used to keep confidential must be identified and information provided in the operational description. 5. RF exposure considerations. KDB 996369 D03, Section 2.6 a. Clearly and explicitly state conditions that allow host manufacturers to use the module. Two types of instructions are necessary: first to the host manufacturer to define conditions (mobile, portable xx cm from body) and second additional text needed to be provided to the end user in the host product manuals. 6. Antennas. KDB 996369 D03, Section 2.7 a. List of antennas included in the application and all applicable professional installer instructions when applicable. The antenna list shall also identify the antenna types

(monopole, PIFA, dipole, etc note that omni-directional is not considered a type) 7. Label and compliance information. KDB 996369 D03, Section 2.8 a. Advice to host integrators that they need to provide a physical or e-label stating Contains FCC ID: with their finished product

- All Items shown to X the left are provided in the Modular Integration Guide (or UM) for Full Modular Approval (MA) or LMA. Therefore the a. 8. Information on test modes and additional testing requirements. KDB 996369 D03, Section 2.9 Test modes that should be taken into consideration by host integrators including clarifications necessary for stand-alone and simultaneous configurations. Provide information on how to configure test modes for evaluation 9. Additional testing, Part 15 Subpart B disclaimer. KDB 996369 D03, Section 2.10 b. Sincerely, By:

Sr. Regulatory Engineer __________________________ __Steven C Hackett______________________

(Signature/Title1)

(Print name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate 053019-02a authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 053019-02a

 

 

Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Date :12/23/2022 Ref: FCC Class II Permissive change for FCC ID: PD9AX101D2 Dear Examiner, This is to request a Class II permissive change for module approval FCC ID: PD9AX101D2, originally granted on 03/26/2021 and on 11/02/2022 for UNII-4. Change #1: To establish conditions for UNII-4 band only based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/

portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Intel Sincerely, By:

__________________________ Steven C. Hackett Wireless Regulatory Engineer Title:

On behalf of: Intel Corporation e-mail:

steven.c.hackett@intel.com Intel Corporation 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 USA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Date : 09/16/2021 Ref: FCC Class II Permissive change for FCC ID: PD9AX101D2 Dear Examiner, This is to request a Class II permissive change for module approval FCC ID: PD9AX101D2, originally granted on 03/26/2021. Change #1: To extend coverage to UNII-4 Band (5.9GHz) according to FCC OET KDB291074 U-NII-4_5.9 Band with WRF LAB WRF-BR-PIFAV3.2 antenna. Sincerely, By:

__________________________ Steven C. Hackett Wireless Regulatory Engineer Title:

On behalf of: Intel Corporation e-mail:

steven.c.hackett@intel.com Intel Corporation 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 USA

 

 

August 28, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Subject: Model AX101D2W Wireless LAN Adapter Card FCC ID: PD9AX101D2 IC: 1000M-AX101D2 Gentlemen:

Please be advised that the Model AX101D2 802.11a/b/g/n/ac/ax + BT Wireless LAN mini-

PCIe card is manufactured for the global market but when marketed in the U.S. under FCC ID: PD9AX101D2 and in Canada under IC: 1000M-AX101D2. The non-volatile memory

(NVM) will be programmed at the factory to only actively scan and operate on these specific channels during normal WLAN operation. During Wi-Fi Direct mode the device may act as a group owner (GO) to establish a peer-to-peer (P2P) network including conditions when no master device is present on these specific channels. Channels 1-13,2412-2472MHz 802.11b mode Channels 1-13, 2412-2472MHz 802.11g mode Channels 1-13, 2412-2472MHz 802.11n mode (20MHz channel) Channels 3-11, 2422-2462MHz 802.11n mode (40MHz channel) The device operates as a client without radar detection capability and will be programmed at the factory to passively scan on the following dynamic frequency selection (DFS) channels and will only listen for a master device and cannot send a probe request to initiate communication on these DFS channels. Accordingly passive scanning provides protection for TDWR operations and preventing transmission in the 5600MHz 5650MHz frequency band. Client software and drivers will never enable the device to act as a master or GO for operation in DFS frequency bands and therefore ad-hoc mode is always disabled on these passive scan DFS channels. Channels 52-64, 5260-5320MHz 802.11a mode Channels 52-64, 5260-5320MHz 802.11n mode (20 MHz channel) Channels 52-64, 5260-5320MHz 802.11ac mode (20 MHz channel) Channels 54-62, 5270-5310MHz 802.11n mode (40MHz channel) Channels 54-62, 5270-5310MHz 802.11ac mode (40MHz channel) Channel 58, 5290MHz 802.11ac mode (80MHz channel) Channels 100-140, 5500-5700MHz 802.11a mode Channels 100-140, 5500-5700MHz 802.11n mode (20 MHz channel) Intel Corporation 100 Center Point Circle Columbia, SC 29210 Channels 100-144, 5500-5720MHz 802.11ac mode (20 MHz channel) Channels 102-134, 5510-5670MHz 802.11n mode (40MHz channel) Channels 102-142, 5510-5710MHz 802.11ac mode (40MHz channel) Channels 106 &138, 5540 & 5690MHz 802.11ac mode (80MHz channel) This device meets the requirements of FCC Part 15.202 and accordingly will be programmed at the factory to active scan on the following non-DFS channels to initiate communication during normal WLAN operation. When operating in Wi-Fi Direct mode on these non-DFS channels, it may operate as a P2P client device or GO to establish a P2P network if, and only if, a master device is present and network communication is maintained between a master device and the GO. Channels 36-48, 5180-5240MHz 802.11a mode Channels 36-48, 5180-5240MHz 802.11n mode (20 MHz channel) Channels 36-48, 5180-5240MHz 802.11ac mode (20 MHz channel) Channels 38-46, 5190-5230MHz 802.11n mode (40MHz channel) Channels 38-46, 5190-5230MHz 802.11ac mode (40MHz channel) Channel 42, 5210MHz 802.11ac mode (80MHz channel) Channels 149-165, 5745-5825MHz 802.11a mode Channels 149-165, 5745-5825MHz 802.11n mode (20 MHz channel) Channels 149-165, 5745-5825MHz 802.11ac mode (20 MHz channel) Channels151-159, 5755-5795MHz 802.11n mode (40MHz channel) Channels151-159, 5755-5795MHz 802.11ac mode (40MHz channel) Channel 155, 5775MHz 802.11ac mode (80MHz channel) This device meets the requirements of FCC Part 15.202 and 15.407 as a 5.9GHz band Indoor client module (UNII) and accordingly will be programmed at the factory to passive scan on the following channels. On these channels, a) the client device will not directly connect to another client device, b) will only associate and connect with an indoor Access Point (AP) or indoor subordinate, and c) the Client device (EUT) will always be under the control of an indoor AP. However. there may exist situations where the client may transmit brief messages, prior to being under the control of an AP, to join an AP network. But these brief messages will only occur if the client has detected a signal confirming that an AP is operating on a particular channel. These brief messages will have a time-out mechanism if it does not receive a response from an AP. Channels 169-177, 5845-5885MHz 802.11a mode Channels 169-177, 5845-5885MHz 802.11n mode (20 MHz channel) Channels 169-177, 5845-5885MHz 802.11ac mode (20 MHz channel) Channels 167-175, 5835-5875MHz 802.11n mode (40MHz channel) Channels 167-175, 5835-5875MHz 802.11ac mode (40MHz channel) Channel 171, 5855MHz 802.11ac mode (80MHz channel) Intel Corporation 100 Center Point Circle Columbia, SC 29210 This information when programmed into the NVM will not be accessible and cannot be changed by the end user. The transmitter is approved as a non-software defined radio and OEMs and third party system integrators do not have the ability through software to allow configuration controls that would permit the device to operate outside the grant conditions per FCC KDB 594280. Sincerely Steven C. Hackett Wireless Regulatory Engineer Intel Corporation Intel Corporation 100 Center Point Circle Columbia, SC 29210

 

 

TheinformationprovidedinthisdocumentappliestothefollowingIntelWirelessAdapterModules. Model FCCID AX101D2W PD9AX101D2 SoftwareSecurityDescriptionKDB594280D02v01r03SectionII GeneralDescription 1. Describehowanysoftware/firmwareupdatewillbe obtained,downloaded,andinstalled.Softwarethatis accessedthroughmanufacturerswebsiteordevices managementsystem,mustdescribethedifferentlevels ofsecurityasappropriate. There is no downloadable software provided by the manufacturer that can modify critical radio transmitter parameters. All critical parameters are programmed in OTP memory at the factory and cannot be modified or overridden by third parties. 2. Describetherfparametersthataremodifiedbyany software/firmwarewithoutanyhardwarechanges.Are theseparametersinsomewaylimited,suchthat,itwill notexceedtheauthorizedRFcharacteristics?

There are no rf parameters that can be modified. All rf parameters are programmed in OTP memory at the factory and cannot be modified or overridden by third parties. 3. Describeindetailtheauthenticationprotocolsthat areinplacetoensurethatthesourceoftheRFrelated software/firmwareislegitimate.Describeindetailhow thesoftwareisprotectedagainstmodification. The firmware is programmed at the factory and cannot be modified by third parties. 4. Describeindetailanyencryptionmethodsusedto supporttheuseoflegitimateRF relatedsoftware/firmware. The firmware is programmed at the factory and cannot be modified by third parties therefore no encryption is necessary. 5. Foradevicethatcanbeconfiguredasamasterand client(withactiveorpassivescanning),explainhowthe deviceensurescomplianceforeachmode?Inparticular ifthedeviceactsasmasterinsomebandofoperation andclientinanother;howiscomplianceensuredin eachbandofoperation?

This is a client module only. ThirdPartyAccessControl 1. Explainifanythirdpartieshavethecapabilityto operateaUSsolddeviceonanyotherregulatory domain,frequencies,orinanymannerthatisin Third parties do not the capability to operate in any manner that is violation of the certification in the U.S. violationofthedevicesauthorizationifactivatedinthe U.S.. 2. Describe,ifthedevicepermitsthirdpartysoftwareor firmwareinstallation,whatmechanismsareprovidedby themanufacturertopermitintegrationofsuch functionswhileensuringthattheRFparametersofthe devicecannotbeoperatedoutsideitsauthorizationfor operationintheU.S.Inthedescriptionincludewhat controlsand/oragreementsareinplacewithproviders ofthirdpartyfunctionalitytoensurethedevices underlyingRFparametersareunchangedandhowthe manufacturerverifiesthefunctionality. 3. ForCertifiedTransmittermodulardevices,describe howthemodulegranteeensuresthathosts manufacturesfullycomplywiththesesoftwaresecurity requirementsforUNIIdevices.Ifthemoduleis controlledthroughdriversoftwareloadedinthehost, describehowthedriversarecontrolledandmanaged suchthatthemodulartransmitterparametersarenot modifiedoutsidethegrantofauthorization. RF parameters are programmed into OTP memory at the factory and cannot be reprogrammed or re-flashed by third parties. There are no rf parameters that can be modified. All rf parameters are programmed in OTP memory at the factory and cannot be modified or overridden by third parties. The module is not controlled by driver software on the host and cannot override critical rf parameters stored in module OTP memory. SOFTWARECONFIGURATIONDESCRIPTIONKDB594280D02v01r02SectionIII USERCONFIGURATIONGUIDE 1. Describetheuserconfigurationspermittedthrough theUI.Ifdifferentlevelsofaccessarepermittedfor professionalinstallers,systemintegratorsorendusers, describethedifferences. No UI provided. a) Whatparametersareviewableandconfigurableby None differentparties?

b) Whatparametersareaccessibleormodifiableto None theprofessionalinstallerorsystemintegrator?

i) Aretheparametersinsomewaylimited,sothat theinstallerswillnotenterparametersthatexceed thoseauthorized?

The module micro-code reads the parameters from the module OTP memory. These parameters cannot be modified or overridden by sw drivers. ii) Whatcontrolsexistthattheusercannotoperate thedeviceoutsideitsauthorizationintheU.S.?

Default mode is always FCC compliant. Other country modes cannot be activated without receiving three independent country codes from different APs, otherwise remains in FCC default mode (always FCC compliant) c) Whatparametersareaccessibleormodifiableby None theenduser?

i) Aretheparametersinsomewaylimited,sothat The module micro-code reads the parameters from the theinstallerswillnotenterparametersthatexceed thoseauthorized?

module OTP memory. These parameters cannot be modified or overridden by sw drivers. ii) Whatcontrolsexistthattheusercannotoperate thedeviceoutsideitsauthorizationintheU.S.?

Default mode is always FCC compliant. Other country modes cannot be activated without receiving three independent country codes from different APs, otherwise remains in FCC default mode (always FCC compliant) d) Isthecountrycodefactoryset?Canitbechanged intheUI?

Default country code is set in the factory and no UI is provided for modification. i) Ifitcanbechanged,whatcontrolsexisttoensure thatthedevicecanonlyoperatewithinitsauthorization intheU.S.?

Programmed for default mode which is always FCC compliant. Always set for default for all start-ups, resets, timeouts or other host or network events. e) Whatarethedefaultparameterswhenthedevice Always FCC compliant isrestarted?

2. Cantheradiobeconfiguredinbridgeormeshmode?

Ifyes,anattestationmayberequired.Further informationisavailableinKDBPublication905462D02. No 3. Foradevicethatcanbeconfiguredasamasterand client(withactiveorpassivescanning),ifthisisuser configurable,describewhatcontrolsexist,withintheUI, toensurecomplianceforeachmode.Ifthedeviceacts asamasterinsomebandsandclientinothers,howis thisconfiguredtoensurecompliance?

4. Foradevicethatcanbeconfiguredasdifferenttypes ofaccesspoints,suchaspointtopointorpointto multipoint,andusedifferenttypesofantennas, describewhatcontrolsexisttoensurecompliancewith applicablelimitsandtheproperantennaisusedfor eachmodeofoperation.(SeeSection15.407(a)) This is a client device. This device is not an access point. Name and surname of applicant (or authorized representative):

Date: August 28, 2022 Signature:

Steven C. Hackett Product Regulations Engineer Intel Corporation

 

 

Doc.No.:3.8.05 Rev 8.7 Regulatory WLAN Antenna Information

(English Language Required for Intel Regulatory Review / Approval)

(OEM/ODM or antenna vendor is required to complete this document with platform antenna information. Remove Intel references and make this your own document) Platform information Brand ODM

****End product model name Intel platform

(ex: Yes, No or NA) Platform type

(ex: regular NB, convertible PC, AIOetc)

*SAR minimum separation (mm) Intel Dipole reference antenna

*****Please fill in exact product model name and make sure the model name is visible on product cover or any parts for end users recognize for authority inspection. Vendor Wieson Type Dipole Antenna information Antenna Part number (Main) Antenna Part number (Aux) ARY121-0009-002-H0 NA Peak gain w/ cable loss (dBi) 2.4GHz 2400-2500MHz 5.2&5.3GHz 5150-5350MHz 5.5GHz 5470-5725MHz 5.8GHz 5725-5850MHz 6.2GHz 5925~6425MHz 6.5GHz 6425~6525MHz 6.7GHz 6525~6875MHz 6.9GHz 6875~7125MHz 3.10 4.11 5.17 5.17 5.06 4.71 4.49 5.34 Module information

(Please check with "x" when applies, or to fill-in proper model in empty column and specify (manual key-in) if you use non-regular sku, ie. Low power sku or mid power sku.) Model 9560 (JfP 2) 9260 (ThP 2) 9461 (JfP 1) 9462 (JfP 1) AX201 (HrP2) NGW NGW NGW NGW NGW D2W D2WL D2W D2W D2W Form factor and suffixes D2WL AX200 (CcP2) AX101 (HrP1) AX210 (TyP2) AX211 (GfP2) D2WL Other Intel model NGW NGW NGW NGW D2WL D2W Intel Reference Gain/Type/ Separation distance Antenna Peak gain (In dBi) Antenna Type 2.4GHz 2400-2500MHz 5.2GHz 5150-5250MHz 5.3GHz 5250-5350MHz 5.5GHz 5470-5725MHz 5.8GHz 5725-5850MHz Distance to the end user ( mm) PIFA 3.24 3.64 3.73 4.77 4.97 Generic sku: refer to modular FCC SAR report Mid-power sku: 8 Low power sku: 5 Notes (marked with *)

*SAR minimum separation (mm)

- Regular NB: Minimum antenna-to-body (from antenna bottom to the bottom of the device)

- Tablet / Convertible PC: Minimum antenna-to-edge (5 sides of the device)

- Mini-tablet: Minimum antenna-to-edge (6 sides of the device) Regulatory WLAN Antenna Information 1/14 Doc.No.:3.8.05 Rev 8.7 Antenna Sample / Antenna Data Requirements for worldwide regulatory approval n o i t c e S Description of Required OEM / ODM Antenna Information 1A Part Number for Antenna only US / IC Taiwan Required Required Required Required Japan EU S.Korea Required 1B Antenna Manufacturer Name Required Required Required Required Required 1C Description of Antenna Type Required N/A N/A N/A N/A 1D Part number of Antenna Assembly / cable impedance, length & diameter. Required Desired Desired Desired Desired 1E Tx1, Tx2 & Tx3 antenna (Peak Gain W/ cable loss) *

Required Required Required Required Required 1E OR 1F, 1G, 1H 1F Tx1, Tx2 & Tx3 antenna (Peak Gain only) *

Required Required Required Required Required 1G VSWR of cable including connector Required Required Required Required Required 1H Tx1, Tx2 & Tx3 antenna (Cable loss W/ connector) *

Required Required Required Required Required 2 3 4 5 6 7 8 Dimensioned Photographs and Drawings of Tx1, Tx2, and Tx3 (or Rx3) antennas Radiation patterns of antennas loaded in the host platform. Platform model name / number - correlated to antenna manufacturer and antenna part number Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). Photograph(s) or Drawings showing the location of all antennas (WLAN, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. Local representative contact information for LMA/

PARS process. Required Required Required Required Required Required Desired Required N/A Required Required Required Desired Required Desired Required Required Desired Required

(Photos) Required

(Photos) Required N/A N/A N/A N/A Required N/A N/A N/A N/A Required N/A N/A N/A N/A Regulatory WLAN Antenna Information 2/14 Doc.No.:3.8.05 Rev 8.7 Antenna Information Section 1. Antenna Assembly Specifications 1A Antenna Part Number 1B Manufacture 1C Antenna Type 1D Cable Assembly Part Number and Information 1E 1F 1G 1H

*Peak Gain W/

Cable loss (dBi) Peak Gain w/o Cable Loss (dBi) VSWR Cable Loss (dB) 2400-2500MHz 3.10 dBi (peak) 2400-2500MHz _.__ dBi (peak) 2400-2500MHz __.__ max 2400-2500MHz _.__ dBi (peak) 5150-5350MHz 4.11 dBi (peak) 5150-5350MHz _.__ dBi (peak) 5150-5350MHz __.__ max 5150-5350MHz _.__ dBi (peak) 5470-5725MHz 5.17 dBi (peak) 5470-5725MHz _.__ dBi (peak) 5470-5725MHz __.__ max 5470-5725MHz _.__ dBi (peak) 5725-5850MHz 5.17 dBi (peak) 5725-5850MHz _.__ dBi (peak) 5725-5850MHz __.__ max 5725-5850MHz _.__ dBi (peak) 5925-6425MHz 5.06 dBi (peak) 5925-6425MHz

.__ dBi (peak) 5925-6425MHz __.__ max 5925-6425MHz _.__ dBi (peak) 6425-6525MHz 4.71 dBi (peak) 6425-6525MHz _.__ dBi (peak) 6425-6525MHz __.__ max 6425-6525MHz _.__ dBi (peak) 6525-6875MHz 4.49 dBi (peak) 6525-6875MHz _.__ dBi (peak) 6525-6875MHz __.__ max 6525-6875MHz _.__ dBi (peak) 6875-7125MHz 5.34 dBi (peak) 6875-7125MHz _.__ dBi (peak) 6875-7125MHz __.__ max 6875-7125MHz _.__ dBi (peak) P/N:

ARY121-0009-

002-H0 Main Antenna Wieson Dipole P/N: AR9851-0009-

005-H0 50 ohm Coaxial length: 12cm diameter: 1.1mm Antenna Peak Gain required being test in system basis. 1E frame contend absolutely peak antenna gain include H/V Regulatory WLAN Antenna Information 3/14 Doc.No.:3.8.05 Rev 8.7 Antenna Peak Gain Table:

Frequency (MHz) 2400 2450 2500 5150 5250 5350 5470 5600 5725 5785 5850 5925 6000 6125 6225 6325 6425 6525 6625 6725 6875 6925 7000 7125 Main antenna 3D Antenna Gain Value (Including Cable loss)

(dBi) 3.10 2.87 2.46 4.03 4.02 4.11 4.82 4.55 5.17 5.12 4.76 5.06 4.97 3.72 4.25 4.48 4.71 4.49 4.46 4.32 4.25 4.67 4.55 5.34 Regulatory WLAN Antenna Information 4/14 Doc.No.:3.8.05 Rev 8.7 Section 2. Dimensioned Photos or Drawings of Antennas Main Antenna Dimensioned Drawing:

Regulatory WLAN Antenna Information 5/14 Doc.No.:3.8.05 Rev 8.7 Cable Drawing:

Regulatory WLAN Antenna Information 6/14 Doc.No.:3.8.05 Rev 8.7 Main Antenna Photo Regulatory WLAN Antenna Information 7/14 Doc.No.:3.8.05 Rev 8.7 Section 3. Radiation characteristics of antennae Loaded in Host Platform Regulatory WLAN Antenna Information 8/14 Doc.No.:3.8.05 Rev 8.7 2400-2500MHz radiation characteristic Main antenna: 2400 MHz Center Frequency 2400 MHz 3D peak(dBi) 3.10 Regulatory WLAN Antenna Information 9/14 Doc.No.:3.8.05 Rev 8.7 Main antenna: 2450 MHz Center Frequency 2450 MHz 3D peak(dBi) 2.87 Regulatory WLAN Antenna Information 10/14 Doc.No.:3.8.05 Rev 8.7 Main antenna: 2500 MHz Center Frequency 2500 MHz 3D peak(dBi) 2.46 Regulatory WLAN Antenna Information 11/14 Doc.No.:3.8.05 Rev 8.7 5150-5350 MHz radiation characteristic Main antenna: 5150 MHz Center Frequency 5150 MHz 3D peak(dBi) 4.03 Regulatory WLAN Antenna Information 12/14 Doc.No.:3.8.05 Rev 8.7 Main antenna: 6125 MHz Center Frequency 6125 MHz 3D peak(dBi) 3.72 Regulatory WLAN Antenna Information 13/14 Doc.No.:3.8.05 Rev 8.7 Main antenna: 7125 MHz Center Frequency 7125 MHz 3D peak(dBi) 5.34 Regulatory WLAN Antenna Information 14/14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

March 15, 2021 Subject: Confidentiality Request for FCC ID: PD9AX101D2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 the applicant requests that a part of the subject FCC application be held confidential. Permanent Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Antenna Specification Operation Description/HW Theory of Operation Operational Description/BT FHSS Description Operational Description Schematics Test Setup Photos Users Manual Intel Mobile Communications has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition"

would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

(Signature/Title1) Steven C. Hackett ________________________

(Print Name) 100 Center Point Circle Columbia, SC 29210