FCC ID: PD9AX200NG Intel Wi-Fi 6 AX200

by: Intel Corporation latest update: 2023-10-17 model: AX200NG

Seventy Seven grants have been issued under this FCC ID from 03/05/2019 to 10/17/2023 (this is one of four hundred and eleven releases in 2023 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, instructions, drivers, password defaults, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Users Manual pdf July 01 2022 / August 19 2022
various Intel WiFi Adapter Information Guide 5.25 Draft 081122 Rev02 Users Manual pdf 2.61 MiB August 18 2022 / August 19 2022
various Users Manual pdf May 20 2019 / November 16 2019
various User Manual Users Manual pdf 2.70 MiB December 02 2022
various Users Manual pdf April 11 2019 / October 08 2019
various Users Manual pdf April 11 2019 / October 08 2019
various Users Manual pdf April 11 2019 / October 08 2019
various Users Manual pdf May 10 2019 / November 06 2019
various Internal Photos Antennas Internal Photos pdf 87.68 KiB July 01 2022 / August 19 2022
various Labels and Locations ID Label/Location Info pdf 257.23 KiB July 08 2020
various RF Exposure Info pdf September 29 2023 / October 17 2023
various Test Report pdf September 29 2023 / October 17 2023
various Attestation Statements pdf September 29 2023 / October 17 2023
various Attestation Statements pdf September 29 2023 / October 17 2023
various External Photos pdf September 29 2023 / October 17 2023
various Cover Letter(s) pdf September 29 2023 / October 17 2023
various Cover Letter(s) pdf September 29 2023 / October 17 2023
various Cover Letter(s) pdf September 29 2023 / October 17 2023
various ID Label/Location Info pdf September 29 2023 / October 17 2023
various External Photos pdf September 29 2023 / October 17 2023
various Internal Photos pdf September 29 2023 / October 17 2023
various ID Label/Location Info pdf September 29 2023 / October 17 2023
various External Photos pdf September 29 2023 / October 17 2023
various External Photos pdf September 29 2023 / October 17 2023
various ID Label/Location Info pdf September 29 2023 / October 17 2023
various RF Exposure Info pdf September 07 2023 / September 12 2023
various Test Report pdf September 07 2023 / September 12 2023
various Test Setup Photos pdf September 07 2023 / September 12 2023
various Test Report pdf September 07 2023 / September 12 2023
various Cover Letter(s) pdf September 07 2023 / September 12 2023
various Internal Photos pdf September 07 2023 / September 12 2023
various Modular Letter Cover Letter(s) pdf 239.67 KiB December 02 2022
various Premissive Change letter Cover Letter(s) pdf 635.27 KiB December 02 2022
various RF Exposure SAR RF Exposure Info pdf 1.05 MiB December 02 2022
various RF Exposure SAR Calibrations RF Exposure Info pdf 1.57 MiB December 02 2022
various Test Report Antenna Data Test Report pdf 362.18 KiB December 02 2022
various Test Report Antenna StarCross Test Report pdf 718.04 KiB December 02 2022
various Test Setup Photos SAR Test Setup Photos pdf 557.16 KiB December 02 2022
various 210209-01.TR26 - FCC, UNII4-RF, AX200NGW-Photographs Test Setup Photos pdf 625.10 KiB July 01 2022 / August 19 2022
various 210209-01.TR26 - FCC, UNII4-RF, AX200NGW Rev01 Part1 Test Report pdf 3.94 MiB July 01 2022 / August 19 2022
various 210209-01.TR26 - FCC, UNII4-RF, AX200NGW Rev01 Part2 Test Report pdf 4.92 MiB July 01 2022 / August 19 2022
various 210209-01.TR27 FCC UNII-4 SAR AX200NGW Rev02 RF Exposure Info pdf 1.00 MiB July 01 2022 / August 19 2022
various 210209-01.TR27 FCC UNII-4 SAR AX200NGW Rev02 Annex E RF Exposure Info pdf 1.63 MiB July 01 2022 / August 19 2022
various 210209-01.TR27 FCC UNII-4 SAR AX200NGW Rev02 Annex F Test Setup Photos pdf 515.13 KiB July 01 2022 / August 19 2022
various FCC - C2PC letter AX200NGW Rev01 Cover Letter(s) pdf 305.25 KiB July 01 2022 / August 19 2022
various Passive-Scan-Attestation-AX200NGW Rev01 Attestation Statements pdf 144.82 KiB July 01 2022 / August 19 2022
various Software-Security-Letter AX200NGW Attestation Statements pdf 856.97 KiB July 01 2022 / August 19 2022
various Cofidentiality Letter Cover Letter(s) pdf 242.17 KiB July 08 2020
various Description Antenna Inpaq Operational Description pdf July 08 2020 confidential
various Descritpion Antenna South Star Operational Description pdf July 08 2020 confidential
various Permissive Change Letter Cover Letter(s) pdf 737.88 KiB July 08 2020
various RF Exposure SAR Report RF Exposure Info pdf 4.40 MiB July 08 2020
various Software Security Letter Cover Letter(s) pdf 62.94 KiB July 08 2020
various Passive Scan Attestation Attestation Statements pdf 241.65 KiB July 08 2020
various Description Antenna High Tek Operational Description pdf June 10 2020 confidential
various Description Antenna WNC Operational Description pdf June 10 2020 confidential
various Description Antenna High-Tek Operational Description pdf November 18 2019 confidential
various RF Exposure Info pdf 3.45 MiB November 18 2019
various RF Exposure Info pdf 3.39 MiB November 18 2019
various Description Antenna Hong Bo Operational Description pdf October 23 2019 confidential
various RF Exposure SAR Report HONG BO RF Exposure Info pdf 3.47 MiB October 23 2019
various RF Exposure SAR Report WNC RF Exposure Info pdf 3.45 MiB October 23 2019
various Descritpion Antenna Hong Bo Operational Description pdf October 23 2019 confidential
various Description Antenna Empire High Tek Operational Description pdf October 11 2019 confidential
various Descritpion Antenna Yageo Operational Description pdf October 11 2019 confidential
various RF Exposure SAR Report High Tek RF Exposure Info pdf 3.42 MiB October 11 2019
various RF Exposure SAR Report Yageo RF Exposure Info pdf 3.42 MiB October 11 2019
various Description Antenna Yageo Operational Description pdf October 11 2019 confidential
various Descritpion Antenna High-Tek Operational Description pdf October 11 2019 confidential
various Authorization Letter Cover Letter(s) pdf 419.31 KiB August 08 2019
various Confidentiality Letter Cover Letter(s) pdf 527.52 KiB August 08 2019
various Description Antenna ICT Operational Description pdf August 08 2019 confidential
various Descritpion Antenna AWAN Operational Description pdf August 08 2019 confidential
various Modular Approval Letter Cover Letter(s) pdf 265.25 KiB August 08 2019
various Description Antenna Auden Operational Description pdf July 08 2019 confidential
various Description 15.407 Operational Description pdf June 25 2019 confidential
various Description Antenna Dipole Operational Description pdf June 25 2019 confidential
various RF Exposure Info pdf June 25 2019
various Test Report pdf June 25 2019
various Test Report pdf June 25 2019
various Test Report pdf June 25 2019
various Test Setup Photos pdf June 25 2019 / December 22 2019
various Description BLE Operational Description pdf June 25 2019 confidential
various Description Dipole Operational Description pdf June 25 2019 confidential
various Description WLAN Operational Description pdf June 25 2019 confidential
various Test Report pdf June 25 2019
various Test Report pdf June 25 2019
various Description Bluetooth Operational Description pdf June 25 2019 confidential
various Test Report pdf June 25 2019
various Description Antenna HongBo WLAN WWAN Operational Description pdf May 30 2019 confidential
various Description Antenna WNC WLAN Only Operational Description pdf May 30 2019 confidential
various Description Antenna WNC WLAN WWAN Operational Description pdf May 30 2019 confidential
various Descritpion Antenna HongB WLAN Only Operational Description pdf May 30 2019 confidential
various Description Antenna Speedwire Operational Description pdf May 28 2019 confidential
various Descritpion Antenna Ethertronics Operational Description pdf May 28 2019 confidential
various Description Antenna ACON Operational Description pdf May 22 2019 confidential
various Descritpion Antenna TE Operational Description pdf May 22 2019 confidential
various Descritpion Antenna Ethertronics 1 Operational Description pdf May 20 2019 confidential
various Descritpion Antenna Ethertronics 2 Operational Description pdf May 20 2019 confidential
various Test Setup Photos pdf May 20 2019
various Description Antenna Hong-Bo Operational Description pdf April 29 2019 confidential
various Intel WiFi Adapter Information Guide 5.25 Draft 081122 Rev02 Users Manual pdf 2.61 MiB August 18 2022 / August 19 2022
various User Manual Users Manual pdf 2.70 MiB December 02 2022
various Internal Photos Antennas Internal Photos pdf 87.68 KiB July 01 2022 / August 19 2022
various Labels and Locations ID Label/Location Info pdf 257.23 KiB July 08 2020
various Modular Letter Cover Letter(s) pdf 239.67 KiB December 02 2022
various Premissive Change letter Cover Letter(s) pdf 635.27 KiB December 02 2022
various RF Exposure SAR RF Exposure Info pdf 1.05 MiB December 02 2022
various RF Exposure SAR Calibrations RF Exposure Info pdf 1.57 MiB December 02 2022
various Test Report Antenna Data Test Report pdf 362.18 KiB December 02 2022
various Test Report Antenna StarCross Test Report pdf 718.04 KiB December 02 2022
various Test Setup Photos SAR Test Setup Photos pdf 557.16 KiB December 02 2022
various 210209-01.TR26 - FCC, UNII4-RF, AX200NGW-Photographs Test Setup Photos pdf 625.10 KiB July 01 2022 / August 19 2022
various 210209-01.TR26 - FCC, UNII4-RF, AX200NGW Rev01 Part1 Test Report pdf 3.94 MiB July 01 2022 / August 19 2022
various 210209-01.TR26 - FCC, UNII4-RF, AX200NGW Rev01 Part2 Test Report pdf 4.92 MiB July 01 2022 / August 19 2022
various 210209-01.TR27 FCC UNII-4 SAR AX200NGW Rev02 RF Exposure Info pdf 1.00 MiB July 01 2022 / August 19 2022
various 210209-01.TR27 FCC UNII-4 SAR AX200NGW Rev02 Annex E RF Exposure Info pdf 1.63 MiB July 01 2022 / August 19 2022
various 210209-01.TR27 FCC UNII-4 SAR AX200NGW Rev02 Annex F Test Setup Photos pdf 515.13 KiB July 01 2022 / August 19 2022
various FCC - C2PC letter AX200NGW Rev01 Cover Letter(s) pdf 305.25 KiB July 01 2022 / August 19 2022
various Passive-Scan-Attestation-AX200NGW Rev01 Attestation Statements pdf 144.82 KiB July 01 2022 / August 19 2022
various Software-Security-Letter AX200NGW Attestation Statements pdf 856.97 KiB July 01 2022 / August 19 2022
various Cofidentiality Letter Cover Letter(s) pdf 242.17 KiB July 08 2020
various Permissive Change Letter Cover Letter(s) pdf 737.88 KiB July 08 2020
various RF Exposure SAR Report RF Exposure Info pdf 4.40 MiB July 08 2020
various Software Security Letter Cover Letter(s) pdf 62.94 KiB July 08 2020
various Passive Scan Attestation Attestation Statements pdf 241.65 KiB July 08 2020
various RF Exposure SAR Report HONG BO RF Exposure Info pdf 3.47 MiB October 23 2019
various RF Exposure SAR Report WNC RF Exposure Info pdf 3.45 MiB October 23 2019
various RF Exposure SAR Report High Tek RF Exposure Info pdf 3.42 MiB October 11 2019
various RF Exposure SAR Report Yageo RF Exposure Info pdf 3.42 MiB October 11 2019
various Authorization Letter Cover Letter(s) pdf 419.31 KiB August 08 2019
various Confidentiality Letter Cover Letter(s) pdf 527.52 KiB August 08 2019
various Modular Approval Letter Cover Letter(s) pdf 265.25 KiB August 08 2019

frequency equipment class purpose
1 2023-10-17 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2422 ~ 2462 DTS - Digital Transmission System
4 2023-09-12 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
5 2022-12-02 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
6 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
7 2022-08-19 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
8 2020-07-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 2422 ~ 2462 DTS - Digital Transmission System
10 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
11 2020-06-10 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2422 ~ 2462 DTS - Digital Transmission System
14 2019-12-10 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
15 2422 ~ 2462 DTS - Digital Transmission System
16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 2019-11-18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 2422 ~ 2462 DTS - Digital Transmission System
19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
20 2019-10-23 2422 ~ 2462 DTS - Digital Transmission System
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
23 2019-10-11 2422 ~ 2462 DTS - Digital Transmission System
24 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 2019-08-08 2402 ~ 2480 DTS - Digital Transmission System
27 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
28 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
29 2019-07-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
30 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
31 2422 ~ 2462 DTS - Digital Transmission System
32 2019-06-25 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
33 2412 ~ 2472 DTS - Digital Transmission System
34 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
35 2019-05-31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
37 2412 ~ 2472 DTS - Digital Transmission System
38 2019-05-28 2402 ~ 2480 DTS - Digital Transmission System
39 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
40 2422 ~ 2462 DTS - Digital Transmission System
41 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
42 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
43 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
44 2019-05-20 2402 ~ 2480 DTS - Digital Transmission System
45 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
46 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
47 2019-05-10 2422 ~ 2462 DTS - Digital Transmission System
48 5270 ~ 5310 NII - Unlicensed National Information Infrastructure TX
49 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
50 2019-05-07 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
51 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
52 2402 ~ 2480 DTS - Digital Transmission System
53 2019-05-06 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
54 2422 ~ 2462 DTS - Digital Transmission System
55 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
56 2019-05-02 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
57 2422 ~ 2462 DTS - Digital Transmission System
58 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
59 2019-04-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
60 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
61 2422 ~ 2462 DTS - Digital Transmission System
62 2019-04-26 2422 ~ 2462 DTS - Digital Transmission System
63 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
64 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
65 2019-04-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
66 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
67 2412 ~ 2472 DTS - Digital Transmission System
68 2019-03-21 2422 ~ 2462 DTS - Digital Transmission System
69 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
70 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
71 2019-03-20 2412 ~ 2472 DTS - Digital Transmission System
72 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
73 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
74 2019-03-05 JBP - Part 15 Class B Computing Device Peripheral Original Equipment
75 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
76 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
77 2422 ~ 2462 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2023-10-17
various 2023-09-12
various 2022-12-02
various 2022-08-19
various 2020-07-08
various 2020-06-10
various 2019-12-10
various 2019-11-18
various 2019-10-23
various 2019-10-11
various 2019-08-08
various 2019-07-08
various 2019-06-25
various 2019-05-31
various 2019-05-28
various 2019-05-20
various 2019-05-10
various 2019-05-07
various 2019-05-06
various 2019-05-02
various 2019-04-29
various 2019-04-26
various 2019-04-11
various 2019-03-21
various 2019-03-20
various 2019-03-05
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0033159344
various 0008035131
various Physical Address 425 rue de Goa Le Cargo B6
various 100 Center Point Circle Suite 200
various 425 rue de Goa
various 100 Center Point Circle
various Antibes, N/A
various Columbia, South Carolina 29210
various Columbia, SC
various Columbia
various Columbia, 29210
various France
various United States
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various h******@ACBcert.com
various H******@acbcert.com
various h******@atcbcert.com
various h******@ACBcert.comi
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code AX200NG
app s Person at the applicant's address to receive grant or for contact
various Name B****** L****
various S******** C****** H******
various Title Regulatory Engineer
various Product Regulations Engineer
various Telephone Number 04930********
various 803-3********
various Fax Number 04930********
various 803-2********
various E-mail b******@intel.com
various s******@intel.com
app s Technical Contact
various Firm Name Intel Corporation
various Intel Mobile Communications
various RF Exposure Lab
various Dekra Testing and Certification
various Name B**** L********
various S****** C****** H******
various S**** H******
various J****** M******
various A**** L****
various Physical Address 425 rue de Goa
various 100 Center Point Circle
various 100 Center Point Circle Suite 200
various 802 N. Twin Oaks Valley Road, Suite 105
various No. 5-22, Ruishukeng, Linkou Dist.
various Antibes, 06600
various Columbia, 29212
various Columbia, South Carolina 29210
various San Marcos, California 92069
various Columbia, 29210
various New Taipei City, 24451
various San Marcos, South Carolina 92069
various San Marcos, 92069
various San Marcos, Wisconsin 92069
various San Marcos, Arizona 92069
various San Marcos, Kansas 92069
various Columbia, California 29210
various France
various United States
various Taiwan
various Telephone Number 04930********
various 80321********
various 80331********
various +7604********
various +1886******** Extension:
various +1760********
various +1760********
various +1803********
various E-mail b******@intel.com
various s******@intel.com
various i******@rfexposurelab.com
various s******@Intel.com
various h******@ACBcert.com
various a******@dekra.com
various I******@rfexposurelab.com
app s Non Technical Contact
various Firm Name Intel Corporation
various Name B******** L******
various G**** C******
various Physical Address 425 rue de Goa
various Antibes, 06600
various France
various Telephone Number 04930********
various +3349********
various E-mail b******@intel.com
various g******@intel.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)04/14/2024
various03/10/2024
various01/04/2021
various12/07/2020
various06/07/2020
various05/16/2020
various04/20/2020
various04/08/2020
various02/04/2020
various01/04/2020
various12/22/2019
various11/26/2019
various11/24/2019
various11/23/2019
various11/18/2019
various11/16/2019
various11/06/2019
various11/03/2019
various11/02/2019
various10/28/2019
various10/27/2019
various10/23/2019
various10/08/2019
various09/17/2019
various09/16/2019
various08/31/2019
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6 AX200
variousIntel Wi-Fi 6E AX200
variousIntel Wireless - AX200
variousIntel Wireless -AX200
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
variousNo
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted for UNII-1 to UNII-3 Bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR for body, simultaneous body transmission, extremity (hand), and simultaneous extremity (hand) exposure conditions are 0.27W/kg, 0.27W/kg, 2.49W/kg and 4.49W/kg. This change establishes portable category SAR conditions for the BOSCH model 3571-0100 Tablet PC with Pifa antennas (Part number: TFF-M7L1MPFX-H029). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for body, simultaneous body transmission, extremity (hand), and simultaneous extremity (hand) exposure conditions are 0.003W/kg, 0.027W/kg, 0.004W/kg and 4.49W/kg. This change establishes portable category SAR conditions for the BOSCH model 3571-0100 Tablet PC with Pifa antennas (Part number: TFF-M7L1MPFX-H029). Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR for body, simultaneous body transmission, extremity (hand), and simultaneous extremity (hand) exposure conditions are 0.16W/kg, 0.27W/kg, 0.75W/kg and 4.49W/kg. This change establishes portable category SAR conditions for the BOSCH model 3571-0100 Tablet PC with Pifa antennas (Part number: TFF-M7L1MPFX-H029). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0).
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.57W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.58W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 band. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Lenovo 300e, 2nd Gen PC with Inpaq WA-F-LB-02-166 and WA-FLB- 02-165 and Southstar N12-4457-R0A and N12-4456-R0A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.90W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Lenovo 300e, 2nd Gen PC with Inpaq WA-F-LB-02-166 and WA-FLB- 02-165 and Southstar N12-4457-R0A and N12-4456-R0A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.22W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Lenovo 300e, 2nd Gen PC with Inpaq WA-F-LB-02-166 and WA-FLB- 02-165 and Southstar N12-4457-R0A and N12-4456-R0A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06W/kg and 1.17W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad 11E, model number TP00066F PC with WNC 025.9015N.0001 & 025.9015O.0001 and HiTek 025.9015N.0011 and 025.9015O.0011 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.17W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad 11E, model number TP00066F PC with WNC 025.9015N.0001 & 025.9015O.0001 and HiTek 025.9015N.0011 and 025.9015O.0011 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 1.17W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad 11E, model number TP00066F PC with WNC 025.9015N.0001 & 025.9015O.0001 and HiTek 025.9015N.0011 and 025.9015O.0011 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W138 PC with WNC 81EAA415.GHV and 81EAA415.GHW antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W138 PC with WNC 81EAA415.GHV and 81EAA415.GHW antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W138 PC with WNC 81EAA415.GHV and 81EAA415.GHW antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Legion Y740S-15IRH PC with Southstar N0Z-1265-R0A and N0Z-1265-R0A and HiTek 0ACCN019003N and 0ACCN019003N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Legion Y740S-15IRH PC with Southstar N0Z-1265-R0A and N0Z-1265-R0A and HiTek 0ACCN019003N and 0ACCN019003N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 0.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Legion Y740S-15IRH PC with Southstar N0Z-1265-R0A and N0Z-1265-R0A and HiTek 0ACCN019003N and 0ACCN019003N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.22W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I33C PC with WNC 6036B0248401 and 6036B0248501 and HongBo 6036B0248301 and 6036B0248201 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.22W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I33C PC with WNC 6036B0248401 and 6036B0248501 and HongBo 6036B0248301 and 6036B0248201 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.22W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I33C PC with WNC 6036B0248401 and 6036B0248501 and HongBo 6036B0248301 and 6036B0248201 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S740-15IRH PC with Yageo ANTA0LC13472WLAN1 and ANTA0LC13472WLAN1 and Hi Tek 0ACCN018043N and 0ACCN018043N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S740-15IRH PC with Yageo ANTA0LC13472WLAN1 and ANTA0LC13472WLAN1 and Hi Tek 0ACCN018043N and 0ACCN018043N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S740-15IRH PC with Yageo ANTA0LC13472WLAN1 and ANTA0LC13472WLAN1 and HiTek 0ACCN018043N and 0ACCN018043N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.66W/kg and 1.45W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-15IRH, with antenna AWAN part no 025.901K5.0011 (Tx1 and Tx2) and ICT part no 025.901K5.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.45W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-15IRH, with antenna AWAN part no 025.901K5.0011 (Tx1 and Tx2) and ICT part no 025.901K5.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.45W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-15IRH, with antenna AWAN part no 025.901K5.0011 (Tx1 and Tx2) and ICT part no 025.901K5.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host TONGFANG, model number - QC7. Antenna Auden (Tx1 and Tx2), Main TX1 - ANTRG5T119-1802, Aux TX2 - ANTRG5T119-1801. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host TONGFANG, model number - QC7. Antenna - Auden (Tx1 and Tx2), Main TX1 - ANTRG5T119-1802, Aux TX2 - ANTRG5T119-1801. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host TONGFANG, model number - QC7. Antenna - Auden (Tx1 and Tx2), Main TX1 - ANTRG5T119-1802, Aux TX2 - ANTRG5T119-1801. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to request Addition of new antenna, antenna type is different from the original application, Antenna type - Dipole Antenna, all other hardware is identical with original grant. Antenna is lower gain from original approval. RF calculations were done to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This change is to request Addition of new antenna, antenna type is different from the original application, Antenna type - Dipole Antenna, all other hardware is identical with original grant. Antenna is lower gain from original approval. RF calculations were done to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is to request Addition of new antenna, antenna type is different from the original application, Antenna type - Dipole Antenna, all other hardware is identical with original grant. Antenna is lower gain from original approval. RF calculations were done to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.57W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P96G, with antenna HongBo part no 260-27301 (Tx1 and Tx2), HongBo part no 260-27302 (Tx1 and Tx2), WNC part no 025.901G1.0011 (Tx1 and Tx2) and WNC part no 025.901G2.0011 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.87W/kg and 1.57W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P96G, with antenna HongBo part no 260-27301 (Tx1 and Tx2), HongBo part no 260-27302 (Tx1 and Tx2), WNC part no 025.901G1.0011 (Tx1 and Tx2) and WNC part no 025.901G2.0011 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.54W/kg and 1.57W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P96G, with antenna HongBo part no 260-27301 (Tx1 and Tx2), HongBo part no 260-27302 (Tx1 and Tx2), WNC part no 025.901G1.0011 (Tx1 and Tx2) and WNC part no 025.901G2.0011 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.08W/kg and 1.19W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P100G, with antenna Ethertronics part no 5003384 (Tx1 and Tx2), HongBo part no 260-24229 (Tx1 and Tx2), Speedwire part no F.0G.FH-6074-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G62 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.19W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P100G, with antenna Ethertronics part no 5003384 (Tx1 and Tx2), HongBo part no 260-24229 (Tx1 and Tx2), Speedwire part no F.0G.FH-6074-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G62 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.19W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P56F, with antenna Acon part no APL6Y-700002 (Tx1 and Tx2) and TE part no 1556723-1 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.19W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P56F, with antenna Acon part no APL6Y-700002 (Tx1 and Tx2) and TE part no 1556723-1 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.19W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P100G, with antenna Ethertronics part no 5003384 (Tx1 and Tx2), HongBo part no 260-24229 (Tx1 and Tx2), Speedwire part no F.0G.FH-6074-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G62 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are .63W/kg and 1.19W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P56F, with antenna Acon part no APL6Y-700002 (Tx1 and Tx2) and TE part no 1556723-1 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.33W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P99G, with antenna Ethertronics part no 5003436 (Tx1 and Tx2), HongBo part no 260-24227 (Tx1 and Tx2),Speedwire part no F.0G.FH-6073-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G42 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06W/kg and 1.33W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P99G, with antenna Ethertronics part no 5003436 (Tx1 and Tx2), HongBo part no 260-24227 (Tx1 and Tx2),Speedwire part no F.0G.FH-6073-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G42 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.33W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P99G, with antenna Ethertronics part no 5003436 (Tx1 and Tx2), HongBo part no 260-24227 (Tx1 and Tx2),Speedwire part no F.0G.FH-6073-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G42 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.53W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - T04J, with antenna HongBo part no 260-24225 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.53W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - T04J, with antenna HongBo part no 260-24225 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.53W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - T04J, with antenna HongBo part no 260-24225 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I23C, with antenna AWAN part no 6036B0236001 (Tx1) and 6036B0235901 (Tx2), HongBo part no 260-27289 (Tx1) and 260-27288 (Tx2) and WNC part no 81EEA415.GF4 (Tx1) and 81EEA415.GF3 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I23C, with antenna AWAN part no 6036B0236001 (Tx1) and 6036B0235901 (Tx2), HongBo part no 260-27289 (Tx1) and 260-27288 (Tx2) and WNC part no 81EEA415.GF4 (Tx1) and 81EEA415.GF3 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I23C, with antenna AWAN part no 6036B0236001 (Tx1) and 6036B0235901 (Tx2), HongBo part no 260-27289 (Tx1) and 260-27288 (Tx2) and WNC part no 81EEA415.GF4 (Tx1) and 81EEA415.GF3 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.21W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I31C, with antenna AWAN part no 6036B0235501 (Tx1) and 6036B0235601 (Tx2), HongBo part no 260-27293 (Tx1) and 260-27292 (Tx2) and WNC part no 81EEA415.GF6 (Tx1) and 81EEA415.GF5 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.21W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I31C, with antenna AWAN part no 6036B0235501 (Tx1) and 6036B0235601 (Tx2), HongBo part no 260-27293 (Tx1) and 260-27292 (Tx2) and WNC part no 81EEA415.GF6 (Tx1) and 81EEA415.GF5 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.21W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I31C, with antenna AWAN part no 6036B0235501 (Tx1) and 6036B0235601 (Tx2), HongBo part no 260-27293 (Tx1) and 260-27292 (Tx2) and WNC part no 81EEA415.GF6 (Tx1) and 81EEA415.GF5 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.59W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I24C-5, with antenna AWAN part no 6036B0234901 (Tx1) and 6036B0235001 (Tx2), HongBo part no 260-27297 (Tx1) and 260-27296 (Tx2) and WNC part no 81EEA415.GF8 (Tx1) and 81EEA415.GF7 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.59W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I24C-5, with antenna AWAN part no 6036B0234901 (Tx1) and 6036B0235001 (Tx2), HongBo part no 260-27297 (Tx1) and 260-27296 (Tx2) and WNC part no 81EEA415.GF8 (Tx1) and 81EEA415.GF7 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.59W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I24C-5, with antenna AWAN part no 6036B0234901 (Tx1) and 6036B0235001 (Tx2), HongBo part no 260-27297 (Tx1) and 260-27296 (Tx2) and WNC part no 81EEA415.GF8 (Tx1) and 81EEA415.GF7 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.37W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I24C-4, with antenna AWAN part no 6036B0235501 (Tx1) and 6036B0235601 (Tx2), HongBo part no 260-27293 (Tx1) and 260-27292 (Tx2) and WNC part no 81EEA415.GF6 (Tx1) and 81EEA415.GF5 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.37W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I24C-4, with antenna AWAN part no 6036B0235501 (Tx1) and 6036B0235601 (Tx2), HongBo part no 260-27293 (Tx1) and 260-27292 (Tx2) and WNC part no 81EEA415.GF6 (Tx1) and 81EEA415.GF5 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determineapplicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.60W/kg and 1.37W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I24C-4, with antenna AWAN part no 6036B0235501 (Tx1) and 6036B0235601 (Tx2), HongBo part no 260-27293 (Tx1) and 260-27292 (Tx2) and WNC part no 81EEA415.GF6 (Tx1) and 81EEA415.GF5 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I30C, with antenna AWAN part no 6036B0236001 (Tx1) and 6036B0235901 (Tx2), HongBo part no 260-27289 (Tx1) and 260-27288 (Tx2) and WNC part no 81EEA415.GF4 (Tx1) and 81EEA415.GF3 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.34W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I30C, with antenna AWAN part no 6036B0236001 (Tx1) and 6036B0235901 (Tx2), HongBo part no 260-27289 (Tx1) and 260-27288 (Tx2) and WNC part no 81EEA415.GF4 (Tx1) and 81EEA415.GF3 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - HSN-I30C, with antenna AWAN part no 6036B0236001 (Tx1) and 6036B0235901 (Tx2), HongBo part no 260-27289 (Tx1) and 260-27288 (Tx2) and WNC part no 81EEA415.GF4 (Tx1) and 81EEA415.GF3 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P110G, with antenna Speedwire part no F.0G.FH-6078-001-00 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.26W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P110G, with antenna Speedwire part no F.0G.FH-6078-001-00 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P110G, with antenna Speedwire part no F.0G.FH-6078-001-00 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.58W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.58W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.58W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.57W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.57W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.57W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and gain as the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Intel Corporation S.A.S.
various Name N****** A******
various Telephone Number 00334********
various 00334********
various Fax Number 00334********
various E-mail n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.189
1 2 15E CC MO 5190 5230 0.166
1 3 15E CC MO 5210 5210 0.105
1 4 15E CC MO 5250 5250 0.096
1 5 15E CC MO ND 5260 5320 0.184
1 6 15E CC MO ND 5270 5310 0.152
1 7 15E CC MO ND 5290 5290 0.089
1 8 15E CC MO ND 5500 5700 0.2
1 9 15E CC MO ND 5710 5710 0.184
1 1 15E CC MO ND 5720 5720 0.156
1 11 15E CC MO ND 5530 5690 0.199
1 12 15E CC MO 5745 5825 0.206
1 13 15E CC MO 5755 5795 0.202
1 14 15E CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.008
3 2 15C CC MO 2412 2472 0.988
3 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.189
4 2 15E CC MO 5190 5230 0.166
4 3 15E CC MO 5210 5210 0.105
4 4 15E CC MO 5250 5250 0.096
4 5 15E CC MO ND 5260 5320 0.184
4 6 15E CC MO ND 5270 5310 0.152
4 7 15E CC MO ND 5290 5290 0.089
4 8 15E CC MO ND 5500 5700 0.2
4 9 15E CC MO ND 5710 5710 0.184
4 1 15E CC MO ND 5720 5720 0.156
4 11 15E CC MO ND 5530 5690 0.199
4 12 15E CC MO 5745 5825 0.206
4 13 15E CC MO 5755 5795 0.202
4 14 15E CC MO 5775 5775 0.163
4 15 15E CC MO 5845 5885 0.326
4 16 15E CC MO 5835 5875 0.681
4 17 15E CC MO 5855 5855 0.561
4 18 15E CC MO 5815 5815 0.285
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.189
5 2 15E CC MO 5190 5230 0.166
5 3 15E CC MO 5210 5210 0.105
5 4 15E CC MO 5250 5250 0.096
5 5 15E CC MO ND 5260 5320 0.184
5 6 15E CC MO ND 5270 5310 0.152
5 7 15E CC MO ND 5290 5290 0.089
5 8 15E CC MO ND 5500 5700 0.2
5 9 15E CC MO ND 5710 5710 0.184
5 1 15E CC MO ND 5720 5720 0.156
5 11 15E CC MO ND 5530 5690 0.199
5 12 15E CC MO 5745 5825 0.206
5 13 15E CC MO 5755 5795 0.202
5 14 15E CC MO 5775 5775 0.163
5 15 15E CC MO 5845 5885 0.326
5 16 15E CC MO 5835 5875 0.681
5 17 15E CC MO 5855 5855 0.561
5 18 15E CC MO 5815 5815 0.285
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.189
6 2 15E CC MO 5190 5230 0.166
6 3 15E CC MO 5210 5210 0.105
6 4 15E CC MO 5250 5250 0.096
6 5 15E CC MO ND 5260 5320 0.184
6 6 15E CC MO ND 5270 5310 0.152
6 7 15E CC MO ND 5290 5290 0.089
6 8 15E CC MO ND 5500 5700 0.2
6 9 15E CC MO ND 5710 5710 0.184
6 1 15E CC MO ND 5720 5720 0.156
6 11 15E CC MO ND 5530 5690 0.199
6 12 15E CC MO 5745 5825 0.206
6 13 15E CC MO 5755 5795 0.202
6 14 15E CC MO 5775 5775 0.163
6 15 15E CC MO 5845 5885 0.326
6 16 15E CC MO 5835 5875 0.681
6 17 15E CC MO 5855 5855 0.561
6 18 15E CC MO 5815 5815 0.285
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.189
7 2 15E CC MO 5190 5230 0.166
7 3 15E CC MO 5210 5210 0.105
7 4 15E CC MO 5250 5250 0.096
7 5 15E CC MO ND 5260 5320 0.184
7 6 15E CC MO ND 5270 5310 0.152
7 7 15E CC MO ND 5290 5290 0.089
7 8 15E CC MO ND 5500 5700 0.2
7 9 15E CC MO ND 5710 5710 0.184
7 1 15E CC MO ND 5720 5720 0.156
7 11 15E CC MO ND 5530 5690 0.199
7 12 15E CC MO 5745 5825 0.206
7 13 15E CC MO 5755 5795 0.202
7 14 15E CC MO 5775 5775 0.163
7 15 15E CC MO 5845 5885 0.326
7 16 15E CC MO 5835 5875 0.681
7 17 15E CC MO 5855 5855 0.561
7 18 15E CC MO 5815 5815 0.285
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.008
9 2 15C CC MO 2412 2472 0.988
9 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E 38 CC MO 5180 5240 0.189
10 2 15E 38 CC MO 5190 5230 0.166
10 3 15E 38 CC MO 5210 5210 0.105
10 4 15E 38 CC MO 5250 5250 0.096
10 5 15E 38 CC MO ND 5260 5320 0.184
10 6 15E 38 CC MO ND 5270 5310 0.152
10 7 15E 38 CC MO ND 5290 5290 0.089
10 8 15E 38 CC MO ND 5500 5700 0.2
10 9 15E 38 CC MO ND 5710 5710 0.184
10 1 15E 38 CC MO ND 5720 5720 0.156
10 11 15E 38 CC MO ND 5530 5690 0.199
10 12 15E 38 CC MO 5745 5825 0.206
10 13 15E 38 CC MO 5755 5795 0.202
10 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E 38 CC MO 5180 5230 0.189
11 2 15E 38 CC MO 5190 5230 0.166
11 3 15E 38 CC MO 5210 5210 0.105
11 4 15E 38 CC MO 5250 5250 0.096
11 5 15E 38 CC MO ND 5260 5320 0.184
11 6 15E 38 CC MO ND 5270 5310 0.152
11 7 15E 38 CC MO ND 5290 5290 0.089
11 8 15E 38 CC MO ND 5500 5700 0.2
11 9 15E 38 CC MO ND 5710 5710 0.184
11 1 15E 38 CC MO ND 5720 5720 0.156
11 11 15E 38 CC MO ND 5530 5690 0.199
11 12 15E 38 CC MO 5745 5825 0.206
11 13 15E 38 CC MO 5755 5795 0.202
11 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402 2480 0.008
13 2 15C CC MO 2412 2472 0.988
13 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E 38 CC MO 5180 5240 0.189
14 2 15E 38 CC MO 5190 5230 0.166
14 3 15E 38 CC MO 5210 5210 0.105
14 4 15E 38 CC MO 5250 5250 0.096
14 5 15E 38 CC MO ND 5260 5320 0.184
14 6 15E 38 CC MO ND 5270 5310 0.152
14 7 15E 38 CC MO ND 5290 5290 0.089
14 8 15E 38 CC MO ND 5500 5700 0.2
14 9 15E 38 CC MO ND 5710 5710 0.184
14 1 15E 38 CC MO ND 5720 5720 0.156
14 11 15E 38 CC MO ND 5530 5690 0.199
14 12 15E 38 CC MO 5745 5825 0.206
14 13 15E 38 CC MO 5755 5795 0.202
14 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.008
15 2 15C CC MO 2412 2472 0.988
15 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402 2480 0.008
18 2 15C CC MO 2412 2472 0.988
18 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E 38 CC MO 5180 5240 0.189
19 2 15E 38 CC MO 5190 5230 0.166
19 3 15E 38 CC MO 5210 5210 0.105
19 4 15E 38 CC MO 5250 5250 0.096
19 5 15E 38 CC MO ND 5260 5320 0.184
19 6 15E 38 CC MO ND 5270 5310 0.152
19 7 15E 38 CC MO ND 5290 5290 0.089
19 8 15E 38 CC MO ND 5500 5700 0.2
19 9 15E 38 CC MO ND 5710 5710 0.184
19 1 15E 38 CC MO ND 5720 5720 0.156
19 11 15E 38 CC MO ND 5530 5690 0.199
19 12 15E 38 CC MO 5745 5825 0.206
19 13 15E 38 CC MO 5755 5795 0.202
19 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.008
20 2 15C CC MO 2412 2472 0.988
20 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E 38 CC MO 5180 5240 0.189
22 2 15E 38 CC MO 5190 5230 0.166
22 3 15E 38 CC MO 5210 5210 0.105
22 4 15E 38 CC MO 5250 5250 0.096
22 5 15E 38 CC MO ND 5260 5320 0.184
22 6 15E 38 CC MO ND 5270 5310 0.152
22 7 15E 38 CC MO ND 5290 5290 0.089
22 8 15E 38 CC MO ND 5500 5700 0.2
22 9 15E 38 CC MO ND 5710 5710 0.184
22 1 15E 38 CC MO ND 5720 5720 0.156
22 11 15E 38 CC MO ND 5530 5690 0.199
22 12 15E 38 CC MO 5745 5825 0.206
22 13 15E 38 CC MO 5755 5795 0.202
22 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.008
23 2 15C CC MO 2412 2472 0.988
23 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15E 38 CC MO 5180 5240 0.189
24 2 15E 38 CC MO 5190 5230 0.166
24 3 15E 38 CC MO 5210 5210 0.105
24 4 15E 38 CC MO 5250 5250 0.096
24 5 15E 38 CC MO ND 5260 5320 0.184
24 6 15E 38 CC MO ND 5270 5310 0.152
24 7 15E 38 CC MO ND 5290 5290 0.089
24 8 15E 38 CC MO ND 5500 5700 0.2
24 9 15E 38 CC MO ND 5710 5710 0.184
24 1 15E 38 CC MO ND 5720 5720 0.156
24 11 15E 38 CC MO ND 5530 5690 0.199
24 12 15E 38 CC MO 5745 5825 0.206
24 13 15E 38 CC MO 5755 5795 0.202
24 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402 2480 0.008
26 2 15C CC MO 2412 2472 0.988
26 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E 38 CC MO 5180 5240 0.189
28 2 15E 38 CC MO 5190 5230 0.166
28 3 15E 38 CC MO 5210 5210 0.105
28 4 15E 38 CC MO 5250 5250 0.096
28 5 15E 38 CC MO ND 5260 5320 0.184
28 6 15E 38 CC MO ND 5270 5310 0.152
28 7 15E 38 CC MO ND 5290 5290 0.089
28 8 15E 38 CC MO ND 5500 5700 0.2
28 9 15E 38 CC MO ND 5710 5710 0.184
28 1 15E 38 CC MO ND 5720 5720 0.156
28 11 15E 38 CC MO ND 5530 5690 0.199
28 12 15E 38 CC MO 5745 5825 0.206
28 13 15E 38 CC MO 5755 5795 0.202
28 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E 38 CC MO 5180 5240 0.189
30 2 15E 38 CC MO 5190 5230 0.166
30 3 15E 38 CC MO 5210 5210 0.105
30 4 15E 38 CC MO 5250 5250 0.096
30 5 15E 38 CC MO ND 5260 5320 0.184
30 6 15E 38 CC MO ND 5270 5310 0.152
30 7 15E 38 CC MO ND 5290 5290 0.089
30 8 15E 38 CC MO ND 5500 5700 0.2
30 9 15E 38 CC MO ND 5710 5710 0.184
30 1 15E 38 CC MO ND 5720 5720 0.156
30 11 15E 38 CC MO ND 5530 5690 0.199
30 12 15E 38 CC MO 5745 5825 0.206
30 13 15E 38 CC MO 5755 5795 0.202
30 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402 2480 0.008
31 2 15C CC MO 2412 2472 0.988
31 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15E 38 CC MO 5180 5240 0.189
32 2 15E 38 CC MO 5190 5230 0.166
32 3 15E 38 CC MO 5210 5210 0.105
32 4 15E 38 CC MO 5250 5250 0.096
32 5 15E 38 CC MO ND 5260 5320 0.184
32 6 15E 38 CC MO ND 5270 5310 0.152
32 7 15E 38 CC MO ND 5290 5290 0.089
32 8 15E 38 CC MO ND 5500 5700 0.2
32 9 15E 38 CC MO ND 5710 5710 0.184
32 1 15E 38 CC MO ND 5720 5720 0.156
32 11 15E 38 CC MO ND 5530 5690 0.199
32 12 15E 38 CC MO 5745 5825 0.206
32 13 15E 38 CC MO 5755 5795 0.202
32 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402 2480 0.008
33 2 15C CC MO 2412 2472 0.988
33 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E 38 CC MO 5180 5240 0.189
36 2 15E 38 CC MO 5190 5230 0.166
36 3 15E 38 CC MO 5210 5210 0.105
36 4 15E 38 CC MO 5250 5250 0.096
36 5 15E 38 CC MO ND 5260 5320 0.184
36 6 15E 38 CC MO ND 5270 5310 0.152
36 7 15E 38 CC MO ND 5290 5290 0.089
36 8 15E 38 CC MO ND 5500 5700 0.2
36 9 15E 38 CC MO ND 5710 5710 0.184
36 1 15E 38 CC MO ND 5720 5720 0.156
36 11 15E 38 CC MO ND 5530 5690 0.199
36 12 15E 38 CC MO 5745 5825 0.206
36 13 15E 38 CC MO 5755 5795 0.202
36 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402 2480 0.008
37 2 15C CC MO 2412 2472 0.988
37 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.008
38 2 15C CC MO 2412 2472 0.988
38 3 15C CC MO 2422 2480 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402 2480 0.008
40 2 15C CC MO 2412 2472 0.988
40 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15E 38 CC MO 5180 5240 0.189
42 2 15E 38 CC MO 5190 5230 0.166
42 3 15E 38 CC MO 5210 5210 0.105
42 4 15E 38 CC MO 5250 5250 0.096
42 5 15E 38 CC MO ND 5260 5320 0.184
42 6 15E 38 CC MO ND 5270 5310 0.152
42 7 15E 38 CC MO ND 5290 5290 0.089
42 8 15E 38 CC MO ND 5500 5700 0.2
42 9 15E 38 CC MO ND 5710 5710 0.184
42 1 15E 38 CC MO ND 5720 5720 0.156
42 11 15E 38 CC MO ND 5530 5690 0.199
42 12 15E 38 CC MO 5745 5825 0.206
42 13 15E 38 CC MO 5755 5795 0.202
42 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15E 38 CC MO 5180 5240 0.189
43 2 15E 38 CC MO 5190 5230 0.166
43 3 15E 38 CC MO 5210 5210 0.105
43 4 15E 38 CC MO 5250 5250 0.096
43 5 15E 38 CC MO ND 5260 5320 0.184
43 6 15E 38 CC MO ND 5270 5310 0.152
43 7 15E 38 CC MO ND 5290 5290 0.089
43 8 15E 38 CC MO ND 5500 5700 0.2
43 9 15E 38 CC MO ND 5710 5710 0.184
43 1 15E 38 CC MO ND 5720 5720 0.156
43 11 15E 38 CC MO ND 5530 5690 0.199
43 12 15E 38 CC MO 5745 5825 0.206
43 13 15E 38 CC MO 5755 5795 0.202
43 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402 2480 0.008
44 2 15C CC MO 2412 2472 0.988
44 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15E 38 CC MO 5180 5240 0.189
45 2 15E 38 CC MO 5190 5230 0.166
45 3 15E 38 CC MO 5210 5210 0.105
45 4 15E 38 CC MO 5250 5250 0.096
45 5 15E 38 CC MO ND 5260 5320 0.184
45 6 15E 38 CC MO ND 5270 5310 0.152
45 7 15E 38 CC MO ND 5290 5290 0.089
45 8 15E 38 CC MO ND 5500 5700 0.2
45 9 15E 38 CC MO ND 5710 5710 0.184
45 1 15E 38 CC MO ND 5720 5720 0.156
45 11 15E 38 CC MO ND 5530 5690 0.199
45 12 15E 38 CC MO 5745 5825 0.206
45 13 15E 38 CC MO 5755 5795 0.202
45 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402 2480 0.008
47 2 15C CC MO 2412 2472 0.988
47 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15E 38 CC MO 5180 5240 0.189
48 2 15E 38 CC MO 5190 5230 0.166
48 3 15E 38 CC MO 5210 5210 0.105
48 4 15E 38 CC MO 5250 5250 0.096
48 5 15E 38 CC MO ND 5260 5320 0.184
48 6 15E 38 CC MO ND 5270 5310 0.152
48 7 15E 38 CC MO ND 5290 5290 0.089
48 8 15E 38 CC MO ND 5500 5700 0.2
48 9 15E 38 CC MO ND 5710 5710 0.184
48 1 15E 38 CC MO ND 5720 5720 0.156
48 11 15E 38 CC MO ND 5530 5690 0.199
48 12 15E 38 CC MO 5745 5825 0.206
48 13 15E 38 CC MO 5755 5795 0.202
48 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15E 38 CC MO 5180 5240 0.189
50 2 15E 38 CC MO 5190 5230 0.166
50 3 15E 38 CC MO 5210 5210 0.105
50 4 15E 38 CC MO 5250 5250 0.096
50 5 15E 38 CC MO ND 5260 5320 0.184
50 6 15E 38 CC MO ND 5270 5310 0.152
50 7 15E 38 CC MO ND 5290 5290 0.089
50 8 15E 38 CC MO ND 5500 5700 0.2
50 9 15E 38 CC MO ND 5710 5710 0.184
50 1 15E 38 CC MO ND 5720 5720 0.156
50 11 15E 38 CC MO ND 5530 5690 0.199
50 12 15E 38 CC MO 5745 5825 0.206
50 13 15E 38 CC MO 5755 5795 0.202
50 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C CC 2402 2480 0.008
52 2 15C CC MO 2412 2472 0.988
52 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402 2480 0.008
54 2 15C CC MO 2412 2472 0.988
54 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E 38 CC MO 5180 5240 0.189
55 2 15E 38 CC MO 5190 5230 0.166
55 3 15E 38 CC MO 5210 5210 0.105
55 4 15E 38 CC MO 5250 5250 0.096
55 5 15E 38 CC MO ND 5260 5320 0.184
55 6 15E 38 CC MO ND 5270 5310 0.152
55 7 15E 38 CC MO ND 5290 5290 0.089
55 8 15E 38 CC MO ND 5500 5700 0.2
55 9 15E 38 CC MO ND 5710 5710 0.184
55 1 15E 38 CC MO ND 5720 5720 0.156
55 11 15E 38 CC MO ND 5530 5690 0.199
55 12 15E 38 CC MO 5745 5825 0.206
55 13 15E 38 CC MO 5755 5795 0.202
55 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15E 38 CC MO 5180 5240 0.189
56 2 15E 38 CC MO 5190 5230 0.166
56 3 15E 38 CC MO 5210 5210 0.105
56 4 15E 38 CC MO 5250 5250 0.096
56 5 15E 38 CC MO ND 5260 5320 0.184
56 6 15E 38 CC MO ND 5270 5310 0.152
56 7 15E 38 CC MO ND 5290 5290 0.089
56 8 15E 38 CC MO ND 5500 5700 0.2
56 9 15E 38 CC MO ND 5710 5710 0.184
56 1 15E 38 CC MO ND 5720 5720 0.156
56 11 15E 38 CC MO ND 5530 5690 0.199
56 12 15E 38 CC MO 5745 5825 0.206
56 13 15E 38 CC MO 5755 5795 0.202
56 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402 2480 0.008
57 2 15C CC MO 2412 2472 0.988
57 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15E 38 CC MO 5180 5240 0.189
60 2 15E 38 CC MO 5190 5230 0.166
60 3 15E 38 CC MO 5210 5210 0.105
60 4 15E 38 CC MO 5250 5250 0.096
60 5 15E 38 CC MO ND 5260 5320 0.184
60 6 15E 38 CC MO ND 5270 5310 0.152
60 7 15E 38 CC MO ND 5290 5290 0.089
60 8 15E 38 CC MO ND 5500 5700 0.2
60 9 15E 38 CC MO ND 5710 5710 0.184
60 1 15E 38 CC MO ND 5720 5720 0.156
60 11 15E 38 CC MO ND 5530 5690 0.199
60 12 15E 38 CC MO 5745 5825 0.206
60 13 15E 38 CC MO 5755 5795 0.202
60 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15C CC 2402 2480 0.008
61 2 15C CC MO 2412 2472 0.988
61 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15C CC 2402 2480 0.008
62 2 15C CC MO 2412 2472 0.988
62 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15E 38 CC MO 5180 5240 0.189
63 2 15E 38 CC MO 5190 5230 0.166
63 3 15E 38 CC MO 5210 5210 0.105
63 4 15E 38 CC MO 5250 5250 0.096
63 5 15E 38 CC MO ND 5260 5320 0.184
63 6 15E 38 CC MO ND 5270 5310 0.152
63 7 15E 38 CC MO ND 5290 5290 0.089
63 8 15E 38 CC MO ND 5500 5700 0.2
63 9 15E 38 CC MO ND 5710 5710 0.184
63 1 15E 38 CC MO ND 5720 5720 0.156
63 11 15E 38 CC MO ND 5530 5690 0.199
63 12 15E 38 CC MO 5745 5825 0.206
63 13 15E 38 CC MO 5755 5795 0.202
63 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15E 38 CC MO 5180 5240 0.189
66 2 15E 38 CC MO 5190 5230 0.166
66 3 15E 38 CC MO 5210 5210 0.105
66 4 15E 38 CC MO 5250 5250 0.096
66 5 15E 38 CC MO ND 5260 5320 0.184
66 6 15E 38 CC MO ND 5270 5310 0.152
66 7 15E 38 CC MO ND 5290 5290 0.089
66 8 15E 38 CC MO ND 5500 5700 0.2
66 9 15E 38 CC MO ND 5710 5710 0.184
66 1 15E 38 CC MO ND 5720 5720 0.156
66 11 15E 38 CC MO ND 5530 5690 0.199
66 12 15E 38 CC MO 5745 5825 0.206
66 13 15E 38 CC MO 5755 5795 0.202
66 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15C CC 2402 2480 0.008
67 2 15C CC MO 2412 2472 0.988
67 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15C CC 2402 2480 0.008
68 2 15C CC MO 2412 2472 0.988
68 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15E 38 CC MO 5180 5240 0.189
69 2 15E 38 CC MO 5190 5230 0.166
69 3 15E 38 CC MO 5210 5210 0.105
69 4 15E 38 CC MO 5250 5250 0.096
69 5 15E 38 CC MO ND 5260 5320 0.184
69 6 15E 38 CC MO ND 5270 5310 0.152
69 7 15E 38 CC MO ND 5290 5290 0.089
69 8 15E 38 CC MO ND 5500 5700 0.2
69 9 15E 38 CC MO ND 5710 5710 0.184
69 1 15E 38 CC MO ND 5720 5720 0.156
69 11 15E 38 CC MO ND 5530 5690 0.199
69 12 15E 38 CC MO 5745 5825 0.206
69 13 15E 38 CC MO 5755 5795 0.202
69 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15C CC 2402 2480 0.008
71 2 15C CC MO 2412 2472 0.988
71 3 15C CC MO 2422 2462 0.777
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15E 38 CC MO 5180 5240 0.189
72 2 15E 38 CC MO 5190 5230 0.166
72 3 15E 38 CC MO 5210 5210 0.105
72 4 15E 38 CC MO 5250 5250 0.096
72 5 15E 38 CC MO ND 5260 5320 0.184
72 6 15E 38 CC MO ND 5270 5310 0.152
72 7 15E 38 CC MO ND 5290 5290 0.089
72 8 15E 38 CC MO ND 5500 5700 0.2
72 9 15E 38 CC MO ND 5710 5710 0.184
72 1 15E 38 CC MO ND 5720 5720 0.156
72 11 15E 38 CC MO ND 5530 5690 0.199
72 12 15E 38 CC MO 5745 5825 0.206
72 13 15E 38 CC MO 5755 5795 0.202
72 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15E 38 CC MO 5180 5240 0.189
75 2 15E 38 CC MO 5190 5230 0.166
75 3 15E 38 CC MO 5210 5210 0.105
75 4 15E 38 CC MO 5250 5250 0.096
75 5 15E 38 CC MO ND 5260 5320 0.184
75 6 15E 38 CC MO ND 5270 5310 0.152
75 7 15E 38 CC MO ND 5290 5290 0.089
75 8 15E 38 CC MO ND 5500 5700 0.2
75 9 15E 38 CC MO ND 5710 5710 0.184
75 1 15E 38 CC MO ND 5720 5720 0.156
75 11 15E 38 CC MO ND 5530 5690 0.199
75 12 15E 38 CC MO 5745 5825 0.206
75 13 15E 38 CC MO 5755 5795 0.202
75 14 15E 38 CC MO 5775 5775 0.163
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15C CC 2402 2480 0.008
77 2 15C CC MO 2412 2472 0.988
77 3 15C CC MO 2422 2462 0.777

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC