FCC ID: 2A7LU-MSR-W6-V1 Secure Router with WiFi

Secure Router AT365 MSR-W6-V1 User Guide 1 HARDWARE USB 3.0 WAN Port Reset WPS Power Port Mesh LAN Ports Package contents AT365 MSR-W6-V1 Ethernet cable 12V/1.5A power adapter User guide Lights Power Wireless 2 FIRST-TIME SETTINGS To help you set up the router, please call our support department to avoid possible issues 1 Plug in power & Internet cable When powered up, your router will broadcast the following SSIDs:

Open network: AnyTech365-2G-Unencrypted Open network: AnyTech365-5G-Unencrypted Encrypted network: AnyTech365-2G-Encrypted Encrypted network: AnyTech365-5G-Encrypted 2 Connect via Wi-Fi The default Wi-Fi password is your routers SN number, and it is printed on the bottom of the router Encrypted Wi-Fi networks

(will not work unless activated by AnyTech365 Support) All your traffic will be encrypted when Power Plug the Internet cable into WAN Wi-Fi configuration If you would like to change the name of the Wi-Fi networks or the passwords, please get in touch with our support line. Unencrypted Wi-Fi networks When connected to these networks, your connected to these Wi-Fi networks:

traffic will not be encrypted:

AnyTech365-2G-Encrypted AnyTech365-5G-Encrypted AnyTech365-2G-Unencrypted AnyTech365-5G-Unencrypted 3 Connect via LAN networks Any device connected to any LAN ports LAN DHCP range 192.168.10.100 - 254 will have all traffic encrypted. You can consult the Router App via your mobile or contact support if you require your data unencrypted via LAN ports. http://192.168.10.1 Router LAN IP Address Power in Plug the Internet cable into WAN To PC 3 INTERNET SETTINGS As soon as you have connected the router, you must call our support department to activate it. Modem Power in Ethernet cable

(From Internet router to WAN ) Power cable Fiber/Coax Cable DHCP/Static The default WAN protocol is DHCP. If your network needs a static IP address, you must call our support line Memory / Storage DDR 512MB+16MB Nor Flash and 128MB Nand Flash Interface CPU 1x WAN Gigabit port 4x LAN Gigabit port 1x Green LED 1x RGB LED Qualcomm 64bit Antennas External Protocol IEEE 802.11a/b/g/n/ac/ax Wi-Fi Speed 3000Mbps Combined Ethernet Port Power Input 5x 10/100/1000M 12V/1.5A Power Consumption

<16.3W Working Temperature 0~40C Storage Temperature

-20~70C Weight 505g SUPPORT & WARRANTY 4 SUPPORT Warranty Each router has Two-year warranty Please use standard power adapter, 12V / 1.5A. Any damage to the router caused by not following the instructions will render this warranty null and void. warranty null and void. Any damage to the router caused by modifying the PCB, components or case will render this Issues caused by the use of third-party firmware may not get official support from us. Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void. Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice. Technical Support & General Enquiry For more details and updated instructions, please visit our website: www.anytech365.com For further questions, you can get help from the following ways:

1. Send us an email at: info@anytech365.com 2. Call at the number you can find on our website this way you can call to your own country AnyTech365 Spain Office Anteco Systems S.L. Edificio Los Pinos, Local 3, CN-340, Km-189 29604 - Marbella - Malaga - Spain IoT Security Group SL - CALLE PEZ DORADO N 27, TORREMOLINOS, MALAGA FCC Radiation Exposure Statement FCC Warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Hereby, IoT Security Group SL declares that the radio equipment type MSR-W6-V1 is in compliance with the essential require-

ments and other relevant provisions of Directive 2014/53/EU. Caution:

This product uses WiFi 2.4GHz Operating Frequency is 2400~2483.5MHz/20dBm; 5GHz Operating Frequency is 5150~5250MHz/23dBm. Restriction Statement:

The device is restricted to indoor use only when operating in the 5150 ~5250 MHz frequency range. Restriction is BE, BG, CH, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE, UK(NI). AT365 MSR-W6-V1 User Guide

Reference No.: WTX22X05104028W001/002 Page 1 of 12 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

loT Security Group, SL Date: 7/22/2022 Subject: Ad Hoc Mode Function Declaration FCC ID: 2A7LU-MSR-W6-V 1 To Whom it may concern, This device is acting as slave and operating in the 2.4 GHz (2412 ~ 2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Regards, Name&Position: Kasper Pedersen/CEO Company: loT Security Group, SL Adress: Calle Pez Dorado, 27, local 2 29620 Torremolinos Malaga, Spain Tel.: +34 678 43 11 51 Fax.: +34 678 43 11 51 E-Mail: kpefgu@gmail.com

IoT Security Group, SL Date: 7/8/2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A7LU-MSR-W6-V1 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Kl Block Diagram (1) Tune-Up Information

] Operational Description XX] Security Information X] Schematics CL] Software Defined Radio (SDR) Information 1] Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

(1) External Photos (] Test Setup Photos

(] Internal Photos (] User Manual C For 45 days, pursuant to Public Notice DA 04-1705. or CL] For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, loT Security Group, SL be e e

___Authorizationand IoT Security Group, SL Calle Pez Dorado, 27, local 2 29620 Torremolinos Malaga, Spain

(FCC ID 2A7LU-MSR-W6-V1) POWER OF ATTORNEY DATE: 7/8/2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Iol Security Group, SL are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, IoT Security Group, SL y ts

'- 5

$m

pod e

loT Security Group, SL Suppliers Declaration Of Conformity for the FCC SDoC Procedure The following Equipment adapt FCC SDoC Procedure according to FCC part 2.906:

Product Name: MSR-W6 Brand Nam: --

Model Number: MSR-W6-V1 Report Number: WTX22X05104028W003 Its herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. The following importer / responsible party in United States:

Not Available at Certification Stage Company Name: N/A Company Address: N/A Telephone: N/A Fax: N/A Person is responsible for marking this declaration:

Kasper Pedersen CEO Name (Full name ) Position / Title 7/8/2022 we

t >

. * a Py

Be =

he

e 4 _ Pe so r ;

ss nc ee