Se ae gh be
. eee ee gael bp ee Aer ay ry ee ee ee CSE ona a 8 ete pT I ArT: Ye pe re Og gem ore pee vO
. Notice : The changes or modifications not expressly approved by the party responsible /
1. Open the bell push To open the front cover carefully a _ insert a flat bladed screw driver, into | at the slot and twist gently (A). When ne refitting the front cover to ensure the weather proofing is maintained, always mount the bell push in the upright position and replace the cover securely. Fig 7 2. To fit or replace the battery Open the front cover and insert |
the CR 2032 Lithium:coin cell battery into the:cover as shown in Fig 2. Any debris created during installation must be removed from the base before =|
fitting-battery, toensure = |
.,goodcontact. 3. Mount the bell push Ensure the wall surface is clean and dry. Mount using the screws and wall plugs provided, See Fig 3. Do not mount the push on ornear _
(< 30cm) large metal objects, as it will block signals from the push |
4. Test the bell:push When the bell push button is.pressed, . the confidence light (B) in 4ig.4,-will illuminate to reassure the callerthat |
the bell push is working. The light will flash 5 times when the battery needs replacing. Friediand guarantees this product for 3 years from date of purchase. Proof of purchase is required, this does not affect your statutory rights. if you require further information about our products, call the Friedland helpline on +44 (0)1268 563066. Friedland a Novar business, Novar ED&S, The Arnoid Centre, Paycocke Road Basildon, Essex, SS14 3EA, England www.friediand.co.uk for compliance could void the user's authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure quirements and void user's authority to operate the device. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.