Volume Down Volume Up Mic Connector Power Connector Switch Turn On/ Off Pairing Operating manual:
Turn on the Car Kit Speaker Turn up the Power On/Off to switch on and an orange LED follows. An indication of music and LED off once the process of switch on is completed. For the first time pairing to blue tooth mobile, it automatically goes to pairing mode. For non-first time pairing, it automatically goes to standby mode. Pairing Mode The twinkle of green & red LED indicates the Car Kit is in pairing mode, the pairing PIN is 0000. Once the Car Kit completes the pairing process, it stays in standby mode. Note: Under the pairing mode, you may select the music by pressing the Talk button. Standby Mode. The Car Kit goes to standby mode under circumstances as below:
1. The Car Kit has successfully paired to your cell phone. 2. After disconnect calls.You are able to answer incoming calls under the standby mode. Auto-answer incoming calls Under the standby mode, the Green LED shows auto-answer incoming calls function is on. The Red LED shows auto-answer incoming calls function is off. To set up the auto-answer function by press both Volume Up and Volume Down under the standby mode. Answer incoming calls While an incoming call comes, the Car Kit displays by the music you previous set up, the incoming call will be answered after two rings under the auto-answer function is on. Press Talk button to answer the call OR Pair button to reject the call. Note: fast flash in Green to show the auto-answer is on OR in Red shows off. Terminate calls Press Talk button to terminate the call, Car Kit LED in Green shows auto-answer function is on OR in Red shows off. Transfer calls. An incoming call is transferable between cell phone and Car Kit. Transfer from Cell phone to Car Kit by pressing Talk button. Transfer from Car Kit to Cell phone, please refer you cell phone manual. Adjust the volume Press the Volume Up button to increase the volume and Volume Down button to reduce the volume. The volume is adjustable during the communication process. Re-enter to the pairing mode Press the Pair button to cancel the pairing record under standby mode and the Car Kit LED will be in orange. LED will be off after cancelled and to restart and pairing mode. Turn off the Car Kit Turn down the switch to turn off the power and follows the LED will be off.