Bluetooth sports headphones Instruction X10 Parameter 1.Product name :Bluetooth sports headphones 2.Model:X10 3.Material:ABS+PC 4.Transmission distance:10m 5.Bluetooth Version: V5.0 6.Battery capacity:120mAH 7.Net weight:16.3g 8.Input:5V=1A 9.Frequency Range: 20-20000Hz 10.Charging Time: about 1.5 hours 11.Talking/Music time: about 10 hours 12.Standby Time :about 88 hours Pairing method 1.Press and hold the power button until the red and blue lights flash alternately. 2.Turn on the phone Bluetooth search to Bluetooth name X10 3.Click pairing and wait for 3 seconds to link successfully. Button Operation 1.Pause/play:Short press 2.Reject the call:Long press for 3 seconds 3.Answer/hang up :Short press 4.Volume 5.Volume + : Short press volume up/Hold press
: Short press volume down/Hold press 3
Safety Precautions seconds for Previous Song 3 seconds for Next Song to let close don't liquid 1.Please don't don't put it in high(above 45or low(under 0 2.Please don't use the indicator light to close to children or animals eyes it 3.Please and badly ,which these are not in guarantee 4.Please the or dismantle damage or burn ,which which these are not in guarantee 5.Please Bluetooth cause it work wrong, and increase the risk of electric shock thunderstorm
,otherwise
,otherwise earbuds headset modify don't don't wet use will will the be in it it it cause temperature condition the headset damage possible to cause headset weather,the thunderstorm maybe Note:If the long-term pairing is not successful,Please clear all pairing records before Bluetooth on your Bluetooth phone,And the device name click Pairing refresh phone Bluetooth interface,Re-search for X10 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.