FCC ID: QZEWLA321 WLA321 Wireles LAN Access Point

by: Juniper Networks, Inc. latest update: 2013-10-29 model: WLA321

Three grants have been issued under this FCC ID from 04/02/2012 to 10/29/2013 (this is one of four releases in 2013 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked instructions, troubleshooting guides, warrantee terms, drivers, & password defaults.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 19
1 ~ 2013-10-29 8
2 ~ 2012-04-02 10
3 ~ 2012-04-02 9

app s				submitted / available
1 2 3	Manual	Users Manual	pdf	131.66 KiB	January 04 2012
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		RF Exposure Info	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Test Report	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf		January 04 2012 / February 04 2012
1 2 3		External Photos	pdf		January 04 2012
1 2 3		Internal Photos	pdf		January 04 2012
1 2 3		ID Label/Location Info	pdf		January 04 2012 / February 04 2012
1 2 3		Cover Letter(s)	pdf		January 04 2012 / February 04 2012
1 2 3		RF Exposure Info	pdf		January 04 2012 / February 04 2012
1 2 3		Test Report	pdf		January 04 2012 / February 04 2012
1 2 3		Cover Letter(s)	pdf		January 04 2012 / February 04 2012
1 2 3		Test Setup Photos	pdf		January 04 2012
1 2 3		Test Report	pdf		January 04 2012 / February 04 2012

exhibit
download
text

1 2 3

Manual

Users Manual

pdf

131.66 KiB

January 04 2012

WLA321 and WLA322 Access Points Quick Start See the complete Wireless LAN Services (WLS) product documentation at http://www.juniper.net/techpubs/. The Juniper Networks WLA321 Wireless LAN Access Point is an indoor, dual-band access point with one 2.4GHz/5GHz 2x2 IEEE 802.11n radio and two internal antennas. The Juniper Networks WLA322 Wireless LAN Access Point is an indoor, dual-band access point with two radios (one 5GHz 2x2 IEEE 802.11n enhanced power radio and one standard power 2.4GHz radio) and four internal antennas. Ceiling Installation for WLA321 and WLA322 Access Points Install WLA321 and WLA322 access points on the ceiling using the mounting bracket provided with the kit or on a junction box on the wall. The primary installation method for WLA321 and WLA322s is the ceiling mount. For instructions for purchasing a junction box wall-mount kit and for installing the access point on the junction box see the WLS documentation at http://www.juniper.net/techpubs/. WLA321 and WLA322 Access Point Package To install and connect the access point, you need:

One ceiling-mount bracket (provided) Mounting template (provided) Category 5 straight-through signaling cable with RJ-45 connectors; installed (not provided) Box cutter or similar tool to cut ceiling tile (not provided)

(Optional) Security kit, which includes a security tool and a security screw (The kit is not provided and can be ordered separately.) Part 1: Install the Access Point These instructions describe installing the access point on a 9/16-inch or 15/16-inch T ceiling-tile rail. 1. Select an installation location under a recessed rail in the ceiling. 2. Cut a hole as follows in the ceiling tile for the Category 5 cable:

Place the mounting template over the area where you will install the access point. Use the box cutter or similar tool to cut along the line marking the opening for the port connectors. Remove the mounting template and the material you cut from the ceiling tile. 4. Ensure the snaps on the top of the ceiling-mount bracket are open so that the clips can fully extend to fit around the ceiling rail. The bracket is shipped in an open position so that it is ready to be clipped over a ceiling rail. 5. If the bracket is closed, open the snaps by pressing in and up with your thumbs on both sides of the snaps on the bottom of the bracket until it is fully open. 6. With the bracket clips fully extended, align the clips with the rail and hook the clips around the top sides of the rail. Push in on the sides of the bracket until the clips lock over the rail. Listen for a click that indicates that the clips have locked. Be sure the bracket has locked securely onto the rail by gently pulling down on the bracket before installing the access point. P u s h in Push in 3. Run the Category 5 cable from the ceiling through the hole in the ceiling tile. 7. Grasp the Category 5 cable that extends from the ceiling and plug it into the access point. 8. Align the access point with the bracket and press forward until the access point clicks into place. Be sure the access point is seated correctly in the bracket by gently pulling down on the access point. 9. If the access point is not properly secured, press the release button on top of the bracket to unlock the access point. Realign the access point, making sure the cable is still connected, and push in on the access point until it clicks securely into place. Release NOTE: We recommend that you use the optional security kit to secure the access point. The kit includes a security tool and a security screw. Be sure to retain the tool so you can unlock and move the access point. Never use a power tool to insert or remove the security screw. 10. (Optional) To lock the access point into place, secure the security screw in the release button by using the tool provided with the security kit. Do not overtighten the screw. Part 2: Connect the Access Point to a Wireless LAN Controller After you install the access point, you can connect the access point directly or indirectly to a wireless LAN controller (WLC) through an intermediate Layer 2 or Layer 3 network device. To connect the access point directly to a WLC:

1. Insert one end of the installed Category 5 cable into the Ethernet port of the access point and the other end into the Ethernet port of the controller. 2. Look at the access point LED for the port on the controller and verify that the link is activated. The link is activated if the LED is green and glowing steadily. Part 3: Configure the Access Point Connection NOTE: If you are installing the access point in a wireless LAN mesh or wireless bridge configuration, you must configure the access point before deploying the access point in the final location. For more information, see the Mobility System Software Configuration Guide at http://www.juniper.net/techpubs/. To configure the access point connection, use the RingMaster GUI or the Mobility System Software CLI. Safety Warnings Summary This is a summary of safety warnings. For a complete list of warnings, including translations, see the Juniper Networks Regulatory Guide in the WLS documentation at http://www.juniper.net/techpubs/. WARNING: Failure to observe these safety warnings can result in personal injury or death. System administrators and equipment installers of the WLAN system are responsible for the systems proper setup and operation in accordance with all rules and regulations of the country in which the equipment operates. Perform only the procedures described in this quick start and the Wireless LAN Services (WLS) documentation. Before installing the WLC, read the planning instructions in the Wireless LAN Services

(WLS) documentation to make sure that the site meets power, environmental, and clearance requirements for the switch. Contacting Juniper Networks For technical support, see http://www.juniper.net/support/requesting-support.html. Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785. Copyright 2012 Juniper Networks, Inc. All rights reserved. Part Number: 530-041698, Revision 01, 29 January 2012.

		frequency	equipment class	purpose
1	2013-10-29	5600 ~ 5700	NII - Unlicensed National Information Infrastructure TX	Class III permissive change to software defined radio
2	2012-04-02	5190 ~ 5230	NII - Unlicensed National Information Infrastructure TX	Original Equipment
3		5755 ~ 5795	DTS - Digital Transmission System

Application Forms

app s	Applicant Information
1 2 3	Effective	2013-10-29
1 2 3	Effective	2012-04-02
1 2 3	Applicant's complete, legal business name	Juniper Networks, Inc.
1 2 3	FCC Registration Number (FRN)	0004536603
1 2 3	Physical Address	1133 Innovation Way
1 2 3		Sunnyvale, California 94089
1 2 3		United States

app s	TCB Information
1 2 3	TCB Application Email Address	c******@micomlabs.com
1 2 3	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2 3	Grantee Code	QZE
1 2 3	Equipment Product Code	WLA321

app s	Person at the applicant's address to receive grant or for contact
1 2 3	Name	M****** G******
1 2 3	Title	Sr. Manager Compliance Engineering
1 2 3	Telephone Number	(408)********
1 2 3	Fax Number	(408)********
1 2 3	E-mail	m******@juniper.net

app s	Technical Contact
1 2 3	Firm Name	Juniper Networks
1 2 3	Firm Name	MiCOM Labs
1 2 3	Name	A**** F**
1 2 3		W****** G**
1 2 3		W**** G**
1 2 3	Physical Address	1194 Mathilda Ave
1 2 3		440 Boulder Court
1 2 3		Sunnyvale, California 94089
1 2 3		Pleasanton, 94550
1 2 3		Pleasanton, 94556
1 2 3		United States
1 2 3	Telephone Number	(408)********
1 2 3	Telephone Number	925 4********
1 2 3	Fax Number	(408)********
1 2 3		924 4********
1 2 3		925 4********
1 2 3	E-mail	a******@juniper.net
1 2 3	E-mail	c******@micomlabs.com

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2 3	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
1 2 3		Yes
1 2 3	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	09/28/2012
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3	Is this application for software defined/cognitive radio authorization?	Yes
1 2 3	Equipment Class	NII - Unlicensed National Information Infrastructure TX
1 2 3	Equipment Class	DTS - Digital Transmission System
1 2 3	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	WLA321 Wireles LAN Access Point
1 2 3		WLA321 Wireless LAN Access Point
1 2 3	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3		Yes
1 2 3	Modular Equipment Type	Does not apply
1 2 3	Purpose / Application is for	Class III permissive change to software defined radio
1 2 3	Purpose / Application is for	Original Equipment
1 2 3	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2 3	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3	Grant Comments	This device has 20 MHz and 40 MHz BW modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.
1 2 3		Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 2x2 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.
1 2 3		Software Defined Radio. Power Output listed is maximum combined Conducted power operating in a 2x2 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter.
1 2 3	Is there an equipment authorization waiver associated with this application?	No
1 2 3	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3	Firm Name	Micom Labs
1 2 3	Name	G** H**
1 2 3	Telephone Number	925-4********
1 2 3	Fax Number	925-4********
1 2 3	E-mail	g******@micomlabs.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15E	CC	5180	5240	0.049
1	2	15E	CC	5260	5320	0.102
1	3	15E	CC	5500	5580	0.098
1	4	15E	CC	5600	5700	0.098
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15E	CC	5180	5240	0.048
2	2	15E	CC	5190	5230	0.049
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	15C	CC	2412	2462	0.15
3	2	15C	CC	2422	2452	0.128
3	3	15C	CC	5745	5825	0.084
3	4	15C	CC	5755	5795	0.077

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2ADYY-T1001W TECNO MOBILE LIMITED 2BEUU-H27 Shenzhen Huashengtimes Electronic Technology Co., LTD PD9BE201D2 Intel Corporation 2ASCB-DH043TLB D2G Group LLC 2AEIM-BTVMS01 Tesla, Inc