3 21. Select Install the software automatically, and then click Next. 22. Enter a name for the USB Reader. If you have several USB Readers, name them all. 23. Create meters, groups and job lists as described in the online user manual. The online manual is available under the Help menu in the program and in Windows under Start > All Programs > Kamstrup and from www.kamstrup.com. Charging of Power Pack Before using Power Pack (the battery part), it must be charged. Charge it with the enclosed charging cable that should be mounted in Power Pack and the PC, after which the charging will start automatically. Power Pack is fully charged when the light emitting diode in the mid-
dle of the round button on the front of Power Pack emits green light. It takes approx. 5-8 hours. Kamstrup USB Meter Reader
. 2 1 0 2 0 1 _ B G _ 1 B _ 9 7 1 1 2 1 5 5 Kamstrup A/S Industrivej 28, Stilling DK-8660 Skanderborg Tel.: +45 89 93 10 00 Fax: +45 89 93 10 01 info@kamstrup.com www.kamstrup.com QUICK START 1 FCC Cautions Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure compliance statement: This device may be used in portable exposure conditions with no restrictions, since the source-
based time-averaged output power is 60/f(GHz) mW. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause un-
desired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Kamstrup USB Meter Reader FCC ID: OUY-USBEXT 2 Installation of Software 1. Start the Internet browser and connect to the website www. kamstrup.com. 2. Under Online services, select USB Meter Reader Software. 3. Fill in the form and click on Send. 4. Click on Confirm to continue or Back to correct your data. 5. You will receive an e-mail with a link for software download. 6. Click on the link and select Download. 7. Select Run twice. The program is now saved to your PC. 8. Select Next . 9. When asked, accept the installation of Microsoft .Net Framework. Select Yes for allowing .Net to make changes on the computer. 10. Select language, and click Next. 11. Select Next twice. Now the program is installed. 12. Windows 7: Select Yes to allow the installation of the program. 13. Select Close to finish the installation. 14. Select Next to confirm the installation of USB Reader driver. 15. Select Execute to end the installation. 16. Start the program by clicking on the icon on the desktop. 17. Insert the USB in your PC. 18. Windows XP: Select No, not this time and then Next. 19. Windows XP: Select Install the software automatically and then Next. 20. Windows XP: Select Execute.