FCC ID: ALH443800 UHF Digital Transceiver

by: Kenwood USA Corporation latest update: 2018-02-24 model: 443800

Four grants have been issued under this FCC ID from 08/08/2013 to 02/24/2018 (this is one of eight releases in 2018 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked drivers, instructions, troubleshooting guides, password defaults, & warrantee terms.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 23
1 ~ 2018-02-24 5
2 ~ 2014-12-11 4
3 ~ 2014-02-04 5
4 ~ 2013-08-08 11

app s				submitted / available
1 2 3 4	Instruction manual	Users Manual	pdf	2.56 MiB	August 08 2013
1 2 3 4		Test Report	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Attestation Statements	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Cover Letter(s)	pdf		November 12 2014
1 2 3 4		Cover Letter(s)	pdf		November 12 2014
1 2 3 4		Test Report	pdf		December 12 2014 / November 12 2014
1 2 3 4		Test Setup Photos	pdf		November 12 2014
1 2 3 4		Cover Letter(s)	pdf		April 02 2014
1 2 3 4		Cover Letter(s)	pdf		April 02 2014
1 2 3 4		Test Report	pdf		April 02 2014
1 2 3 4		RF Exposure Info	pdf		April 02 2014
1 2 3 4		Test Setup Photos	pdf		April 02 2014
1 2 3 4		Cover Letter(s)	pdf		August 08 2013
1 2 3 4		Cover Letter(s)	pdf		August 08 2013
1 2 3 4		External Photos	pdf		August 08 2013
1 2 3 4		Cover Letter(s)	pdf		August 08 2013
1 2 3 4		Internal Photos	pdf		August 08 2013
1 2 3 4		ID Label/Location Info	pdf		August 08 2013
1 2 3 4		Test Report	pdf		August 08 2013
1 2 3 4		RF Exposure Info	pdf		August 08 2013

exhibit
download
text

1 2 3 4

Instruction manual

Users Manual

pdf

2.56 MiB

August 08 2013

RADIO FREQUENCY ENERGY SAFETY INFORMATION This KENWOOD transceiver has been tested and complies with the standards listed below, in regards to Radio Frequency (RF) energy and electromagnetic energy (EME) generated by the transceiver. FCC RF exposure limits for Occupational Use Only. RF Exposure limits adopted by the FCC are generally based on recommendations from the National Council on Radiation Protection and Measurements, & the American National Standards Institute. FCC OET Bulletin 65 Edition 97-01 Supplement C American National Standards Institute (C95.1 1992) American National Standards Institute (C95.3 1992) This KENWOOD transceiver generates RF EME while transmitting. RF EME (Radio Frequency Electric &

Magnetic Energy) has the potential to cause slight thermal, or heating effects to any part of your body less than the recommended distance from this radio transmitters antenna. RF energy exposure is determined primarily by the distance to and the power of the transmitting device. In general, RF exposure is minimized when the lowest possible power is used or transmission time is kept to the minimum required for consistent communications, and the greatest distance possible from the antenna to the body is maintained. The transceiver has been designed for and is classified for Occupational Use Only. Occupational/ controlled exposure limits are applicable to situations in which persons are exposed to RF energy as a consequence of their employment, and such persons have been made aware of the potential for exposure and can exercise control over their exposure. This means you can use the transceiver only if you are aware of the potential hazards of operating a transceiver and are familiar in ways to minimize these hazards. This transceiver is not intended for use by the general public in uncontrolled environments. Uncontrolled environment exposure limits are applicable to situations in which the general public may be exposed to RF energy, or in which the persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. The following list provides you with the information required to ensure that you are aware of RF exposure and of how to operate this transceiver so that the FCC RF exposure limitations are not exceeded. While transmitting (holding the PTT switch or speaking with VOX enabled), always keep the antenna and the radio at least 3 cm (1 3/16 inches) from your body or face, as well as from any bystanders. A LED on the top of the radio shows red when the transmitter is operating in both PTT and VOX modes. Do not transmit for more than 50% of the total transceiver use time; transmitting over 50% of the total use time may exceed the limits in accordance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time. Use only the specified antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by KENWOOD. Use only KENWOOD authorized accessories (antennas, battery packs, belt clips, Speaker/ Mics or headsets etc.): When worn on the body, always place the radio in a KENWOOD recommended clip or carrying case meant for this product. The use of other than recommended or approved body- worn accessories may result in RF exposure levels which exceed the FCCs occupational/

controlled environment RF exposure limits. To ensure that your exposure to RF EME is within the FCC limits for occupational use, you must observe and adhere to the above points. Electromagnetic Interference Compatibility Electronic devices are susceptible to electromagnetic interference (EMI) if they are not adequately shielded or designed for electromagnetic compatibility. Because this transceiver generates RF energy, it can cause interference to such equipment. Turn OFF your transceiver where signs are posted to do so. Hospitals and health care facilities use equipment that is sensitive to electromagnetic radiation. Turn OFF your transceiver while on board an aircraft when so instructed. Use of the transceiver must be in accordance with airline regulations and/or crew instructions. B59-2687-00

		frequency	equipment class	purpose
1	2018-02-24	470 ~ 512	TNF - Licensed Non-Broadcast Transmitter Held to Face	Class II permissive change or modification of presently authorized equipment
2	2014-12-11	470 ~ 512	TNF - Licensed Non-Broadcast Transmitter Held to Face
3	2014-02-04	450 ~ 512	TNF - Licensed Non-Broadcast Transmitter Held to Face
4	2013-08-08	450 ~ 512	TNF - Licensed Non-Broadcast Transmitter Held to Face	Original Equipment

Application Forms

app s	Applicant Information
1 2 3 4	Effective	2018-02-24
1 2 3 4		2014-12-11
1 2 3 4		2014-02-04
1 2 3 4		2013-08-08
1 2 3 4	Applicant's complete, legal business name	Kenwood USA Corporation
1 2 3 4	FCC Registration Number (FRN)	0004356960
1 2 3 4	Physical Address	3970 Johns Creek Court
1 2 3 4		Suwanee, Georgia 30024
1 2 3 4		United States

app s	TCB Information
1 2 3 4	TCB Application Email Address	k******@hctamerica.com;charvey@ieee.org
1 2 3 4		a******@compliancetesting.com
1 2 3 4		j******@compliancetesting.com
1 2 3 4	TCB Scope	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)

app s	FCC ID
1 2 3 4	Grantee Code	ALH
1 2 3 4	Equipment Product Code	443800

app s	Person at the applicant's address to receive grant or for contact
1 2 3 4	Name	D****** W****
1 2 3 4	Title	Senior Product Planning & Development Manager
1 2 3 4	Telephone Number	67847********
1 2 3 4	Fax Number	67847********
1 2 3 4	E-mail	d******@us.jvckenwood.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2 3 4	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
1 2 3 4		Yes
1 2 3 4	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4	Is this application for software defined/cognitive radio authorization?	No
1 2 3 4	Equipment Class	TNF - Licensed Non-Broadcast Transmitter Held to Face
1 2 3 4	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	UHF Digital Transceiver
1 2 3 4		UHF DIGITAL TRANSCEIVER
1 2 3 4		NX-340-K, NX-340-M, NX-340U-K
1 2 3 4		Model NX-340 Digital Transceiver
1 2 3 4	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3 4	Modular Equipment Type	Does not apply
1 2 3 4	Purpose / Application is for	Class II permissive change or modification of presently authorized equipment
1 2 3 4	Purpose / Application is for	Original Equipment
1 2 3 4	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1 2 3 4	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3 4	Grant Comments	Class II Permissive Change. Power output listed is at the antenna terminal on the device. This certification meets the spectral efficiency requirements of 90.203J (4) and 90.203J (5). Output power listed is conducted at the antenna terminal. Output power is variable from 1 to 5W. This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations with a specific antenna, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to the specific belt-clip for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. SAR was evaluated for body worn and held-to-face operating modes. The highest reported head and body-worn accessory SAR values at 50% duty factor across all filings under this FCC ID are 3.87 W/kg and 4.99 W/kg, respectively.
1 2 3 4		Class II Permissive Change to add additional bandwidths. Power output listed is at the antenna terminal on the device. These devices comply with the requirements of Section 90.203(j). Output power listed is conducted at the antenna terminal. Output power is variable from 1 to 5W. SAR for body worn operation has been tested and meets the FCC RF exposure guidelines when used with the listed accessory designated for this product. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This device may operate only with antennas as described in this filing and must transmit with a source-based time-averaging duty factor not exceeding 50%. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. SAR was evaluated for body worn and held-to-face operating modes. The highest reported SAR values at 50% duty factor are - Face: 3.87 W/kg; Body-worn: 4.99 W/kg. Power output listed is at the antenna terminal on the device. This certification meets the spectral efficiency requirements of 90.203J (4) and 90.203J (5). This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations with a specific antenna, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to the specific belt-clip for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are - Face: 3.87 W/kg; Body-worn: 4.99 W/kg.
1 2 3 4		This is a C2PC to add the following antenna types: KRA-42M UHF Stubby Antenna (440-490M) KRA-42M2 UHF Stubby Antenna (470-520M) KRA-23M UHF Low Profile Helical Antenna (440-490M) KRA-23M UHF Low Profile Helical Antenna (440-490M) Power output listed is at the antenna terminal on the device. This certification meets the spectral efficiency requirements of 90.203J (4) and 90.203J (5). This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations with a specific antenna, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to the specific belt-clip for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are - Face: 3.87 W/kg; Body-worn: 4.99 W/kg.
1 2 3 4		Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations with a specific antenna(s) and accessories, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are - Face: 0.59 W/kg; Body-worn: 0.87 W/kg.
1 2 3 4	Is there an equipment authorization waiver associated with this application?	No
1 2 3 4	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3 4	Firm Name	Compliance Testing, LLC
1 2 3 4	Name	M**** S****
1 2 3 4	Name	S** S****
1 2 3 4	Telephone Number	480-9********
1 2 3 4	Telephone Number	48092********
1 2 3 4	Fax Number	480 9********
1 2 3 4	Fax Number	48092********
1 2 3 4	E-mail	m******@compliancetesting.com
1 2 3 4	E-mail	s******@ComplianceTesting.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	22,74,9	EF	470	512	5	1 ppm	16K0F3E
1	2	22,74,9	EF	450	512	5	1 ppm	11K0F3E
1	3	22,74,9	EF ES	450	512	5	1 ppm	8K30F1E
1	4	22,74,9	EF ES	450	512	5	1 ppm	8K30F1D
1	5	22,74,9	EF ES	450	512	5	1 ppm	8K30F7W
1	6	22,74,9	EF ES	450	512	5	1 ppm	4K00F1E
1	7	22,74,9	EF ES	450	512	5	1 ppm	4K00F1D
1	8	22,74,9	EF ES	450	512	5	1 ppm	4K00F7W
1	9	22,74,9	EF ES	450	512	5	1 ppm	4K00F2D
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	9	EF	450	512	5	1 ppm	8K30F1E
2	2	9	EF	450	512	5	1 ppm	8K30F1D
2	3	9	EF	450	512	5	1 ppm	8K30F7W
2	4	9	EF	470	512	5	1 ppm	16K0F3E
2	5	9	EF	450	512	5	1 ppm	11K0F3E
2	6	9	EF	450	512	5	1 ppm	4K00F1E
2	7	9	EF	450	512	5	1 ppm	4K00F1D
2	8	9	EF	450	512	5	1 ppm	4K00F7W
2	9	9	EF	450	512	5	1 ppm	4K00F2D
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	9	EF	450	512	5	1 ppm	11K0F3E
3	2	9	EF	450	512	5	1 ppm	4K00F1E
3	3	9	EF	450	512	5	1 ppm	4K00F1D
3	4	9	EF	450	512	5	1 ppm	4K00F7W
3	5	9	EF	450	512	5	1 ppm	4K00F2D
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
4	1	9	EF	450	512	5	1 ppm	11K0F3E
4	2	9	EF	450	512	5	1 ppm	4K00F1E
4	3	9	EF	450	512	5	1 ppm	4K00F1D
4	4	9	EF	450	512	5	1 ppm	4K00F7W
4	5	9	EF	450	512	5	1 ppm	4K00F2D

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details