all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual | Users Manual | 964.93 KiB | March 08 2009 / May 08 2009 | |||
1 |
|
RF Safety Manual | Users Manual | 691.87 KiB | March 08 2009 / May 08 2009 | |||
1 |
|
Revised Manual | Users Manual | 76.29 KiB | / May 08 2009 | |||
1 | Cover Letter(s) | March 08 2009 / May 08 2009 | ||||||
1 | Cover Letter(s) | March 08 2009 / May 08 2009 | ||||||
1 | Cover Letter(s) | March 08 2009 / May 08 2009 | ||||||
1 | Cover Letter(s) | / May 08 2009 | ||||||
1 | Cover Letter(s) | March 03 2010 / May 08 2009 | ||||||
1 | External Photos | March 08 2009 / May 08 2009 | ||||||
1 | Internal Photos | March 08 2009 / May 08 2009 | ||||||
1 | Cover Letter(s) | March 08 2009 / May 08 2009 | ||||||
1 | ID Label/Location Info | March 08 2009 / May 08 2009 | ||||||
1 | Cover Letter(s) | March 08 2009 / May 08 2009 | ||||||
1 | RF Exposure Info | March 08 2009 / May 08 2009 | ||||||
1 | Test Setup Photos | March 08 2009 / May 08 2009 | ||||||
1 | Test Report | March 08 2009 / May 08 2009 |
1 | Manual | Users Manual | 964.93 KiB | March 08 2009 / May 08 2009 |
INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-2300 TK-3300 UHF FM TRANSCEIVER B62-2159-00 (K, K2) 09 08 07 06 05 04 03 02 01 00 Thank You We are grateful for your purchase of this Kenwood product and welcome you to the Business Radio Service (BRS). Your Kenwood 2-way Business Radio is called a transceiver, meaning transmitter & receiver. We believe this easy-to-
use transceiver will provide you with dependable and reliable communications. This Kenwood transceiver is a precision device. Treat it with care, and you will enjoy years of reliable operation. Models Covered bY This Manual TK-2300 (K): 4-channel VHF FM Transceiver TK-3300 (K): 4-channel UHF FM Transceiver TK-2300 (K2): 16-channel VHF FM Transceiver TK-3300 (K2): 16-channel UHF FM Transceiver FeaTures 4 channels (K) or 16 channels (K2) with 27 VHF operating frequencies (TK-2300) or 89 UHF operating frequencies
(TK-3300) and 122 tone/ code settings for each channel allowing you to ignore unwanted calls. Built in voice scrambler gives you complete privacy for your conversations. Hands free operation when using an optional headset. Voice announcement lets you know which channel you have selected and which settings you have made when reassigning key functions and channel settings. Operating COnditiOns Open locatons (no obstructons) Up to 6 mles
(approxmately 9.6 km) Resdental areas (near buldngs) Up to 1.5 mles
(approxmately 2.4 km) In steel/ concrete renforced buldngs Up to 250,000 square feet
(approxmately 23,220 m2) In hgh rses Up to 20 floors Note: The lsted ranges are based on feld testng and may vary wth your operatng condtons and ndvdual transcever. Terminal Descriptions Speaker/ Microphone Jacks It s possble to use a resn-based cover for the Speaker/ Mcrophone jacks. I/O Description Impedance Name NO. External PTT Input / Seral Data Input External MIC Input Internal MIC Output External Opton Detect 5V Output GND Seral Data Output No Connecton Audo Input Receved Audo Output CMOS 1.8 k 1.8 k Hgh Impedance 100 GND CMOS 8 8 I I O I O O I O 1 PTT / RXD 2 MIC 3 MICIN OPTDET 4 5M 5 AE 6 TXD 7 NC 8 9 SPO 10 SPI Antenna Terminal 50 impedance Battery Terminal The battery termnal uses a sprng plate. The negatve termnal connects to the chasss ground. The battery s mounted on the rear sde of the transcever usng a latch mountng method.
FCC LiCense inFOrmatiOn Your KENWOOD transcever operates on communcatons frequences whch are subject to FCC (Federal Communcatons Commsson) Rules & Regulatons. FCC Rules requre that all operators usng Prvate Land Moble rado frequences obtan a rado lcense before operatng ther equpment. Applcaton for lcense must be made on FCC form 601, schedules D and H, and Remttance form 159. FAX: Forms can be obtaned by fax from the FCC Fax-On-
Demand system. Call 1-202-418-0177 from your fax machne and request document number 000601 for the form, schedules, and nstructons. MAIL: Forms can be ordered by telephone, and wll be sent to you by frst class mal. Call the FCC Forms Hotlne at 1-800-418-FORM (1-800-418-3676). INTERNET: Form 601 and nstructons can be downloaded from the FCC Forms webste at http://www.fcc.gov/formpage.html Before fllng out your Form 601 applcaton Techncal Data secton, you must decde on whch frequences you wll operate. See the frequency charts on pages 14 and 15. QUESTIONS? Call the FCC for lcense applcaton questons at 1-888-CALL-FCC (1-888-225-5322).
One or more of the following statements may be applicable:
FCC WARNING Ths equpment generates or uses rado frequency energy. Changes or modfcatons to ths equpment may cause harmful nterference unless the modfcatons are expressly approved n the nstructon manual. The user could lose the authorty to operate ths equpment f an unauthorzed change or modfcaton s made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nterference n a resdental nstallaton. Ths equpment generates, uses and can generate rado frequency energy and, f not nstalled and used n accordance wth the nstructons, may cause harmful nterference to rado communcatons. However, there s no guarantee that the nterference wll not occur n a partcular
nstallaton. If ths equpment does cause harmful nterference to rado or televson recepton, whch can be determned by turnng the equpment off and on, the user s encouraged to try to correct the
nterference by one or more of the followng measures:
Reorent or relocate the recevng antenna. Connect the equpment to an outlet on a crcut dfferent from that Increase the separaton between the equpment and recever. to whch the recever s connected. Consult the dealer for techncal assstance. ATTENTION:
The RBRC Recycle seal found on Kenwood lthum-on
(L-on) battery packs ndcates Kenwoods voluntary partcpaton n an ndustry program to collect and recycle L-on batteres after ther operatng lfe has expred. The RBRC program s an alternatve to dsposng L-on batteres wth your regular refuse or n muncpal waste streams, whch s llegal n some areas. For nformaton on L-on battery recyclng n your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837). Kenwoods nvolvement n ths program s part of our commtment to preserve our envronment and conserve our natural resources.
nOtiCes tO the User Government law prohbts the operaton of unlcensed rado transmtters wthn the terrtores under government control. Illegal operaton s punshable by fne and/or mprsonment. Refer servce to qualfed techncans only. Safety: It s mportant that the operator s aware of, and understands, hazards common to the operaton of any transcever. preCaUtiOns Do not charge the transcever and battery pack when they are wet. Ensure that there are no metallc tems located between the transcever and the battery pack. Do not use optons not specfed by Kenwood. If the de-cast chasss or other transcever part s damaged, do not touch the damaged parts. If a headset or headphone s connected to the transcever, reduce the transcever volume. Pay attenton to the volume level when turnng the squelch off. Do not place the mcrophone cable around your neck whle near machnery that may catch the cable. Do not place the transcever on unstable surfaces. Ensure that the end of the antenna does not touch your eyes. When the transcever s used for transmsson for many hours, the radator and chasss wll become hot. Do not touch these locatons when replacng the battery pack. Do not mmerse the transcever n water. Always swtch the transcever power off before nstallng optonal accessores. The charger s the devce that dsconnects the unt from the AC mans lne. The AC plug should be readly accessble.
v Turn the transcever power off n the followng locatons:
In explosve atmospheres (nflammable gas, dust partcles, metallc powders, gran powders, etc.). Whle takng on fuel or whle parked at gasolne servce statons. Near explosves or blastng stes. In arcrafts. (Any use of the transcever must follow the nstructons and regulatons provded by the arlne crew.) Where restrctons or warnngs are posted regardng the use of rado devces, ncludng but not lmted to medcal facltes. Near persons usng pacemakers. Do not dsassemble or modfy the transcever for any reason. Do not place the transcever on or near arbag equpment whle the vehcle s runnng. When the arbag nflates, the transcever may be ejected and strke the drver or passengers. Do not transmt whle touchng the antenna termnal or f any metallc parts are exposed from the antenna coverng. Transmttng at such a tme may result n a hgh-frequency burn. If an abnormal odor or smoke s detected comng from the transcever, swtch the transcever power off mmedately, remove the battery pack from the transcever, and contact your Kenwood dealer. Use of the transcever whle you are drvng may be aganst traffc laws. Please check and observe the vehcle regulatons n your area. Do not expose the transcever to extremely hot or cold condtons. Do not carry the battery pack (or battery case) wth metal objects, as they may short the battery termnals. Danger of exploson f the battery s ncorrectly replaced; replace only wth the same type. When operatng the transcever n areas where the ar s dry, t s easy to buld up an electrc charge (statc electrcty). When usng an earphone accessory n such condtons, t s possble for the transcever to send an electrc shock through the earphone and to your ear. We recommend you use only a speaker/mcrophone n these condtons, to avod electrc shocks. v Information concerning the battery pack:
The battery pack ncludes flammable objects such as organc solvent. Mshandlng may cause the battery to rupture producng flames or extreme heat, deterorate, or cause other forms of damage to the battery. Please observe the followng prohbtve matters. Do not disassemble or reconstruct battery!
The battery pack has a safety functon and protecton crcut to avod danger. If they suffer serous damage, the battery may generate heat or smoke, rupture, or burst nto flame. Do not short-circuit the battery!
Do not jon the + and termnals usng any form of metal (such as a paper clp or wre). Do not carry or store the battery pack n contaners holdng metal objects (such as wres, chan-necklace or harpns). If the battery pack s short-crcuted, excessve current wll flow and the battery may generate heat or smoke, rupture, or burst
nto flame. It wll also cause metal objects to heat up. Do not incinerate or apply heat to the battery!
If the nsulator s melted, the gas release vent or safety functon s damaged, or the electrolyte s gnted, the battery may generate heat or smoke, rupture, or burst nto flame. Do not use or leave the battery near fire, stoves, or other heat generators (areas reaching over 80C/ 176F)!
If the polymer separator s melted due to hgh temperature, an
nternal short-crcut may occur n the ndvdual cells and the battery may generate heat or smoke, rupture, or burst nto flame. Do not immerse the battery in water or get it wet by other means!
If the batterys protecton crcut s damaged, the battery may charge at extreme current (or voltage) and an abnormal chemcal reacton may occur. The battery may generate heat or smoke, rupture, or burst nto flame. Do not charge the battery near fire or under direct sunlight!
If the batterys protecton crcut s damaged, the battery may charge at extreme current (or voltage) and an abnormal chemcal reacton may occur. The battery may generate heat or smoke, rupture, or burst nto flame. v
Use only the specified charger and observe charging requirements!
If the battery s charged n unspecfed condtons (under hgh temperature over the regulated value, excessve hgh voltage or current over regulated value, or wth a remodeled charger), t may overcharge or an abnormal chemcal reacton may occur. The battery may generate heat or smoke, rupture, or burst nto flame. Do not pierce the battery with any object, strike it with an instrument, or step on it!
Ths may break or deform the battery, causng a short-crcut. The battery may generate heat or smoke, rupture, or burst nto flame. Do not jar or throw the battery!
An mpact may cause the battery to leak, generate heat or smoke, rupture, and/or burst nto flame. If the batterys protecton crcut
s damaged, the battery may charge at an abnormal current (or voltage), and an abnormal chemcal reacton may occur. The battery may generate heat or smoke, rupture, or burst nto flame. Do not use the battery pack if it is damaged in any way!
The battery may generate heat or smoke, rupture, or burst nto flame. Do not solder directly onto the battery!
If the nsulator s melted or the gas release vent or safety functon
s damaged, the battery may generate heat or smoke, rupture, or burst nto flame. Do not reverse the battery polarity (and terminals)!
When chargng a reversed battery, an abnormal chemcal reacton may occur. In some cases, an unexpected large amount of current may flow upon dschargng. The battery may generate heat or smoke, rupture, or burst nto flame. Do not reverse-charge or reverse-connect the battery!
The battery pack has postve and negatve poles. If the battery pack does not smoothly connect wth a charger or operatng equpment, do not force t; check the polarty of the battery. If the battery pack s reverse-connected to the charger, t wll be reverse-
charged and an abnormal chemcal reacton may occur. The battery may generate heat or smoke, rupture, or burst nto flame. v
Do not touch a ruptured and leaking battery!
If the electrolyte lqud from the battery gets nto your eyes, wash your eyes wth fresh water as soon as possble, wthout rubbng your eyes. Go to the hosptal mmedately. If left untreated, t may cause eye-problems. Do not charge the battery for longer than the specified time!
If the battery pack has not fnshed chargng even after the regulated tme has passed, stop t. The battery may generate heat or smoke, rupture, or burst nto flame. Do not place the battery pack into a microwave or high pressure container!
The battery may generate heat or smoke, rupture, or burst nto flame. Keep ruptured and leaking battery packs away from fire!
If the battery pack s leakng (or the battery emts a bad odor),
mmedately remove t from flammable areas. Electrolyte leakng from battery can easly catch on fre and may cause the battery to generate smoke or burst nto flame. Do not use an abnormal battery!
If the battery pack emts a bad odor, appears to have dfferent colorng, s deformed, or seems abnormal for any other reason, remove t from the charger or operatng equpment and do not use
t. The battery may generate heat or smoke, rupture, or burst nto flame. v
CONTENTS UNPACKING AND CHECKING EQUIPMENT .......................... 1 PREPARATION .......................................................... 2 ORIENTATION ........................................................... 6 BASIC OPERATIONS ................................................... 8 VOICE OPERATED TRANSMISSION (VOX) .......................... 9 BACKGROUND OPERATIONS ........................................ 10 CHANNEL SETUP MODE .............................................. 11 KEY ASSIGNMENT MODE ............................................ 20 TROUBLESHOOTING GUIDE ......................................... 25 ALL RESET MODE ..................................................... 26 OPTIONAL ACCESSORIES ............................................ 26 UNPACKING AND CHECKING EQUIPMENT Carefully unpack the transceiver. If any of the items listed below are missing or damaged, file a claim with the carrier immediately. SUPPLIED ACCESSORIES Battery charger/ AC adapter (KSC-35) ...................................
Li-ion Battery pack (KNB-45L) ................................................
Speaker/ microphone jack cover ............................................
Speaker/ microphone locking bracket ....................................
Belt clip (KBH-0) ...................................................................
Screw set M3 x 6 mm (Black) ..................................................................
M3 x 8 mm .............................................................................. 2 Instruction manual ..................................................................
Note: Refer to "PREPARATION" for accessory installation instructions.
PREPARATION INSTALLING/ REMOVING THE BATTERY PACK Do not short the battery terminals or dispose of the battery by fire. Never attempt to remove the casing from the battery pack. 1 Align the battery pack with the back of the transceiver, then press the battery pack and transceiver firmly together until the release latch on the base of the transceiver locks. 2 To remove the battery pack, lift the safety catch on the base of the transceiver, then press the release latch underneath the safety catch. 3 While pressing the release latch, pull the battery pack away from the transceiver. 2 INSTALLING THE ANTENNA Antenna Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. Note: The antenna is neither a handle, a key ring retainer, nor a speaker/
microphone attachment point. Using the antenna in these ways may damage the antenna and degrade your transceivers performance. INSTALLING THE BELT CLIP If necessary, attach the belt clip using the two supplied M3 x 8 mm screws. Note: If the belt clip is not installed, its mounting location may get hot during continuous transmission or when left sitting in a hot environment. Belt clip Do not use glue which is designed to prevent screw loosening when installing the belt clip, as it may cause damage to the transceiver. Acrylic ester, which is contained in these glues, may crack the transceivers back panel. 3 INSTALLING THE COVER OVER THE SPEAKER/ MICROPHONE JACKS If you are not using a speaker/
microphone, install the cover over the speaker/ microphone jacks using the supplied M3 x 6 mm screw. Note: To keep the transceiver water resistant, you must cover the speaker/
microphone jacks with the supplied cover. Speaker/ microphone jack cover INSTALLING THE OPTIONAL SPEAKER/ MICROPHONE
(OR HEADSET) 1 Insert the speaker/ microphone
(or headset) plugs into the speaker/ microphone jacks. 2 Attach the locking bracket using the supplied M3 x 6 mm screw. Note: The transceiver is not fully water resistant while using the speaker/ microphone. Speaker/ microphone locking bracket 4 CHARGING THE BATTERY PACK The battery pack is not charged at the factory; charge it before use. Average battery pack life (calculated using 5% transmit time, 5% receive time, and 90% standby time) is 7 hours. ATTENTION: Always switch OFF a transceiver equipped with a battery pack before inserting the transceiver into the charger. 1 Plug the AC adapter cable into the jack located on the rear of the charger. 2 Plug the AC adapter into an AC outlet. 3 Slide a battery pack or a transceiver equipped with a battery pack into the charging slot of the charger. Make sure the metal contacts of the battery pack mate securely with the charger terminals. The indicator lights red and charging begins. 4 When charging is completed, the indicator lights green. Remove the battery pack or the transceiver from the charging slot of the charger. Charging slot Indicator It takes approximately 3 hours to charge the battery pack. When the charger will not be used for a long time, unplug the AC adapter from the AC outlet. Note:
When the indicator blinks red, the battery pack is either defective or the battery pack contacts are not properly mated with those of the charger. The ambient temperature should be between 4F and 04F
(5C and 40C) while charging is in progress. Charging outside this range may not fully charge the battery. The battery pack life is over when its operating time decreases even though it is fully and correctly charged. Replace the battery pack. 5 ORIENTATION Antenna Battery pack Channel selector Rotate to change the operating channel. To change the operating frequency or QT/DQT settings of a channel, refer to CHANNEL SETUP MODE on page . Channel Annunciation: When changing channels, the transceiver will announce the newly selected channel number. LED indicator For the LED indicator status, refer to page 8. Power switch/ Volume control Turn clockwise to switch the transceiver ON. To switch the transceiver OFF, turn counterclockwise until a click sounds. Rotate to adjust the volume level. PTT (Push to Talk) switch Press and hold, then speak into the microphone to transmit. 6 Side 1 key Press to activate its programmable function. The default setting is Super Lock. For function descriptions and details on how to change the function of the Side 1 key, refer to KEY ASSIGNMENT MODE on page 20. Side 2 key Press to activate its programmable function. The default setting is Scan + Temporary Delete. For function descriptions and details on how to change the function of the Side 2 key, refer to KEY ASSIGNMENT MODE on page 20. Speaker/ microphone jacks Insert the Speaker/ microphone or Headset plug into this jack. 7 BASIC OPERATIONS 1 Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. A beep sounds. 2 Rotate the Channel selector to select your desired channel. When you receive an appropriate signal, you will hear audio from the speaker. Adjust the volume as necessary. 3 To make a call, press and hold the PTT switch, then speak into the microphone using your normal speaking voice. Hold the microphone approximately .5 inches
(3 to 4 cm) from your lips. 4 Release the PTT switch to receive. Note: When the battery pack voltage becomes too low, transmission will stop and an alert tone will sound. LED Indicator Status Indicator Color Lights red Lights green Blinks red Blinks green Blinks red/orange Meaning Transmitting Receiving a call Battery power is low while transmitting Scanning The selected channel has not been programmed and cannot be used. 8 VOICE OPERATED TRANSMISSION (VOX) VOX operation allows you to transmit hands-free. VOX can only be used if you are using a supported headset. This function can be turned off for specific channels. To activate VOX and set the VOX Gain level, perform the following steps:
1 Connect the headset to the transceiver . The VOX function does not activate when a headset is not connected to the accessory terminal of the transceiver. 2 With the transceiver power OFF, press and hold the Side 1 key while turning the transceiver power ON. 3 Continue to hold the Side 1 key until a beep sounds. The LED indicator lights turn orange. When the Side 1 key is released, the transceiver will announces the VOX Gain level. 4 Press the Side 1 key to select the VOX Gain level (from
~0 or Off). An audio voice will announce the VOX Gain level. Press the Side 2 key to turn VOX ON/OFF for the current channel (you can change this setting for each channel by selecting a channel with the Channel selector). When turned ON, a beep sounds. When turned OFF, a double beep sounds. 5 Press the PTT switch to save the setting. A beep will sound. The transceiver announces the new VOX Gain level. 6 Turn the transceiver power OFF and then ON again to activate VOX. Note:
If a headset is connected to the transceiver while the VOX function is switched ON and the VOX Gain level is configured to a higher, more sensitive level, louder received signals may cause the transceiver to start transmission. The transceiver will automatically return to normal operation if no action is performed for 5 seconds. 9 BACKGROUND OPERATIONS TIME-OUT TIMER (TOT) The Time-out Timer prevent callers from using a channel for an extended duration (60 seconds). If you continuously transmit for the duration, transmission will stop and an alert tone will sound. To stop the tone, release the PTT switch. BATTERY SAVER When activated by your dealer, the Battery Saver function decreases the amount of power used after no signal is present and no operations are being performed for 5 seconds. When a signal is received or an operation is performed, Battery Saver turns off. Note: While the Battery Saver is operating, the LED may flash green when receiving a QT/DQT signal which does not match the QT/DQT tone/code set up in your transceiver. LOw BATTERY wARNING While operating the transceiver, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red when the battery needs recharged or replaced. CHANNEL ANNUNCIATION When changing the channel, the transceiver will announce the newly selected channel number. Likewise, the transceiver will announce the current channel after you turn the transceiver power ON.
0 CHANNEL SETUP MODE This transceiver allows you to reprogram each of the channels with different frequencies and QT (Quiet Talk)/ DQT (Digital Quiet Talk) settings. The table below lists the default channel settings. Channel Number Table Number Frequency (MHz) QT/DQT Setting 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 TK-2300 (K) 4 channel model 20 2
2
54.4900
54.550
5.6250
5.9550 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz TK-2300 (K2) 16 channel model 20 2
2
0
2
5 26
2 2 2 5 6
54.4900
54.550
5.6250
5.9550
5.8200
5.8800
5.9400
5.525
5.6250
5.6250
5.6250
5.9550
5.9550
5.9550
5.7000
5.7600 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 77.0 Hz 88.5 Hz
79.9 Hz 82.5 Hz 94.8 Hz
79.9 Hz 67.0 Hz 67.0 Hz
Channel Number Table Number Frequency (MHz) QT/DQT Setting TK-3300 (K) 16 channel model 2 8 9
0 TK-3300 (K2) 16 channel model 464.5500 467.9250 46.0375 46.0625 2 8 9
0
2
3
4
3 4 5 6 7
5
6 464.5500 467.9250 46.0375 46.0625 46.0875 46.25 46.375 46.625 464.5000 467.7625 467.825 467.8500 467.8750 467.9000 46.875 46.225 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2 CHANNEL OPERATING FREQUENCIES To change the operating frequency of a channel:
1 With the transceiver power OFF, press and hold the PTT switch and Side 1 key while turning the transceiver power ON. Continue to hold the PTT switch and Side 1 key until the LED lights orange and the transceiver announces Self. 2 Release the PTT switch and Side 1 key. The transceiver announces Channel. Pressing the Side 1 key or Side 2 key will toggle between QT, DQT, and Channel setup. 3 Press and release the PTT switch, then rotate the Channel selector to your desired channel. Upon pressing and releasing the PTT switch, a beep will sound and the transceiver announces Table zero. 4 Press the Side 1 or Side 2 key to increment/ decrement the Table number, to select the new channel frequency. Table numbers and their corresponding operating frequencies are provided in the table on page 4. A voice announcement will inform you of the currently selected Table number. 5 Press the PTT switch to save the setting. A beep will sound. Repeat steps 3 to 5 to set up another channel. 6 Turn the transceiver power OFF and then ON again to activate the new settings. Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds.
3 TK-2300 Table Number Operating Frequency (MHz) TK-2300 Table Number Operating Frequency (MHz) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 OFF
5.6250
5.9550
52.8850
52.950
5.7000
5.7600
52.9450
5.8350
5.8050
5.525
5.6550
5.6850
5.750 14 15 16 17 18 19 20 21 22 23 24 25 26 27
5.7450
5.7750
5.8650
5.8950
5.9250
52.7000
54.4900
54.550
54.5275
54.5400
53.0050
54.6550
58.4000
58.4075 TK-3300 Table Number Operating Frequency (MHz) TK-3300 Table Number Operating Frequency (MHz) OFF 464.5000 464.5500 467.7625 467.825 467.8500 467.8750 467.9000 467.9250 46.0375 46.0625 46.0875 46.25 46.375 14 15 16 17 18 19 20 21 22 23 24 25 26 27 46.625 46.875 46.225 46.2375 46.2625 46.2875 46.325 46.3375 46.3625 462.7625 462.7875 462.825 462.8375 462.8625 0 1 2 3 4 5 6 7 8 9 10 11 12 13
4 TK-3300 Table Number Operating Frequency (MHz) TK-3300 Table Number Operating Frequency (MHz) 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 462.8875 462.925 464.4875 464.525 464.5375 464.5625 466.0375 466.0625 466.0875 466.25 466.375 466.625 466.875 466.225 466.2375 466.2625 466.2875 466.325 466.3375 466.3625 467.7875 467.8375 467.8625 467.8875 467.925 469.4875 469.525 469.5375 469.5625 462.875 462.4625 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 462.4875 462.525 467.875 467.4625 467.4875 467.525 45.875 45.2375 45.2875 45.3375 45.4375 45.5375 45.6375 452.325 452.5375 452.425 452.525 452.7625 452.8625 456.875 456.2375 456.2870 456.3375 456.4375 456.5375 456.6375 457.325 457.425 457.525 457.7625 457.8625
5 QT/ DQT SETTINGS Quiet Talk (QT) and Digital Quiet Talk (DQT) are functions that reject undesired signals on your channel. You will hear a call only when you receive a signal that contains a matching QT tone or DQT code. If a call containing a different tone or code is received, squelch will not open and you will not hear the call. Likewise, when transmitting using QT or DQT, the receiving station must have a matching tone or code to hear your call. Be aware that other parties can still hear your calls if they set up their transceiver with the same tone or code. To change the QT/DQT settings of a channel:
1 With the transceiver power OFF, press and hold the PTT switch and Side 1 key while turning the transceiver power ON. Continue to hold the PTT switch and Side 1 key until the LED lights orange and the transceiver announces Self. 2 Release the PTT switch and Side 1 key. The transceiver announces Channel. Pressing the Side 1 key or Side 2 key will toggle between QT, DQT, and Channel setup. 3 Press the Side 1 or Side 2 key to select QT or DQT setup. The transceiver announces QT or DQT, depending on your selection. 4 Press and release the PTT switch, then rotate the Channel selector to your desired channel. Upon releasing the PTT switch, the transceiver announces QT One or DQT One, depending on your selection. 5 Press the Side 1 or Side 2 key to increment/ decrement the Tone number, to select the new tone or code. Tone numbers and their corresponding tones/ codes are provided in the table on pages 7 and 8. Press and hold the Side 1 or Side 2 key to increment/
decrement the QT or DQT number by 5 at a time. A voice announcement will inform you of the currently selected QT or DQT number.
6 6 Press the PTT switch to save the setting. A beep will sound. Repeat steps 3 to 6 to set up another channel. 7 Turn the transceiver power OFF and then ON again to activate the new settings. Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds. QT Channel Settings:
QT Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 QT Frequency 67.0 Hz 7.9 Hz 74.4 Hz 77.0 Hz 79.7 Hz 82.5 Hz 85.4 Hz 88.5 Hz 9.5 Hz 94.8 Hz 97.4 Hz
00.0 Hz
03.5 Hz
07.2 Hz QT Number 15 16 17 18 19 20 21 22 23 24 25 26 27 28 QT Frequency
0.9 Hz
4.8 Hz
8.8 Hz
23.0 Hz
27.3 Hz
3.8 Hz
36.5 Hz
4.3 Hz
46.2 Hz
5.4 Hz
56.7 Hz
62.2 Hz
67.9 Hz
73.8 Hz QT Number 29 30 31 32 33 34 35 36 37 38 39 off QT Frequency
79.9 Hz
86.2 Hz
92.8 Hz 203.5 Hz 20.7 Hz 28. Hz 225.7 Hz 233.6 Hz 24.8 Hz 250.3 Hz 69.3 Hz OFF
7 DQT Channel Settings:
DQT Number 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 DQT Code D74N D205N D223N D226N D243N D244N D245N D25N D26N D263N D265N D27N D306N D3N D35N D33N D343N D346N D35N D364N D365N D37N D4N D42N D43N D423N D43N D432N DQT Number 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 off DQT Code D445N D464N D465N D466N D503N D506N D56N D532N D546N D565N D606N D62N D624N D627N D63N D632N D654N D662N D664N D703N D72N D723N D73N D732N D734N D743N D754N OFF DQT Code D023N D025N D026N D03N D032N D043N D047N D05N D054N D065N D07N D072N D073N D074N D4N D5N D6N D25N D3N D32N D34N D43N D52N D55N D56N D62N D65N D72N DQT Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
8 CHANNEL CONFIRMATION MODE To confirm your channel settings:
1 With the transceiver power OFF, press and hold the PTT switch while turning the transceiver power ON. Continue to hold the PTT switch until the LED lights orange and the transceiver announces Confirm. 2 Release the PTT switch. The transceiver announces the channel table number and Tone number of the selected channel. 3 Rotate the Channel selector to your desired channel within 5 seconds, otherwise the operation will cancel. The transceiver announces the channel table number and Tone number of the current channel. Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds.
9 KEY ASSIGNMENT MODE This transceiver allows you to reprogram the Side 1 and Side 2 keys with any of the functions listed in the table below. Explanations on the use of each function are provided under PROGRAMMABLE FUNCTIONS, on page 22. Table Number Function Name None (no function) Calling Alert Key Lock Key Lock with Status Memory Monitor Monitor Momentary Scan Scan + Temporary Delete (Side 2 key default) Scrambler Squelch Off Squelch Off Momentary Temporary Delete Super Lock (Side 1 key default) Temporary Delete 0 1 2 3 4 5 6 7 8 9 10 11 12 13 20 To change the functions of the Side 1 and Side 2 keys:
1 With the transceiver power OFF, press and hold the Side 1 and Side 2 keys while turning the transceiver power ON. Continue to hold the Side and Side 2 keys until the LED lights orange and the transceiver announces Setup. 2 Continue to press and hold the key to be reprogrammed
(either the Side 1 or Side 2 key), while releasing the remaining key. The transceiver will announce Table zero. If you continue to hold both keys, or if you release both keys, the operation will cancel in 5 seconds. 3 Release the key. 4 Press the Side 1 or Side 2 key to increment/ decrement the number, to select the new key function. Table numbers and their corresponding functions are provided in the table on page 20. A voice announcement will inform you of the currently selected Table number. 5 Press the PTT switch to save the setting. A beep will sound and the transceiver will announce the new Table number. 6 Turn the transceiver power OFF and then ON again to activate the new settings. Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds. 2
PROGRAMMABLE FUNCTIONS Calling Alert Calling alert tones help identify yourself to party members and inform them that you are calling. Your dealer can set up your transceiver with of 0 calling alert tones. If each party member uses a different tone, it is easy to know who is calling. To make a call, press and hold the PTT switch, then press the key programmed as Calling Alert. Release the key to end the tone. Key Lock Press and hold this key for second to lock/ unlock the transceiver keys. The following keys/ functions can still be used when Key Lock is active:
Calling Alert, Key Lock, Monitor, Monitor Momentary, PTT, Squelch Off, Squelch Off Momentary, and Volume. When the transceiver power is turned OFF and then ON again, the Key Lock function will be cancelled. Key Lock with Status Memory This operates the same as Key Lock except that when the transceiver power is turned OFF and then ON again, the keys remain locked. Without Status Memory, when the transceiver power is turned OFF and then ON again, the Key Lock function will be cancelled. Monitor Momentarily press this key to deactivate QT or DQT signaling. Press the key again to return to normal operation. Monitor Momentary Press and hold this key to deactivate QT or DQT signaling. Release the key to return to normal operation. 22 Scan Scan is useful for monitoring signals on the transceiver channels. When scanning, the transceiver checks for a signal on each channel and only stops if a signal is present. If the QT/DQT matches, the transceiver stops at the channel and opens the squelch so you can listen to the call. If the QT/DQT does not match, the call is ignored and scanning continues. Scan + Temporary Delete (Side 2 key default) Press this key to start scanning the transceiver channels. When Scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for 3 seconds. Scrambler The Scrambler function allows you to hold a conversation in complete privacy. When the Scrambler function is activated, any other party that is listening to your channel will be unable to understand your conversation. Squelch Off Momentarily press this key to hear background noise. Press the key again to return to normal operation. Squelch Off Momentary Press and hold this key to hear background noise. Release the key to return to normal operation. Temporary Delete When Scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for second. 23 Super Lock (Side 1 key default) Super Lock locks the same keys as Key Lock. Press and hold this key for 4 seconds to lock the transceiver keys. To deactivate Super Lock, with the transceiver power OFF, press and hold the Side 2 key for 2 seconds while turning the transceiver power ON. When the LED lights orange, release the Side 2 key. A confirmation tone will sound. Low Transmit Power Press this key to change the transmit power to low power. 24 TROUBLESHOOTING GUIDE Problem Solution Cannot turn the transceiver power ON. The battery pack may be dead. Recharge or replace the battery pack. The battery pack may not be installed correctly. Remove the battery pack and install again. Battery power dies shortly after charging. The battery pack life is finished. Replace the battery pack with a new one. Cannot talk to or hear other members in your group. Other voices (besides group members) are present on the channel. Make sure you are using the same frequency and QT/DQT settings as the other members in your group. Other group members may be using the Scrambler function. Turn on your transceivers Scrambler. Other group members may be too far away. Make sure you are within range of the other transceivers. Change the QT/DQT settings. Make sure all group members change the settings on their transceivers to match the new QT/DQT setting. 25 ALL RESET MODE At some point in time, you may desire to reset the transceiver settings to their default values. This function will reset all channels to their default frequencies and QT/DQT, the VOX function to its default status, and all keys to their default functions. To reset the transceiver:
1 With the transceiver power OFF, press and hold the PTT switch, the Side 1 key, and the Side 2 key while turning the transceiver power ON. Continue to hold the keys for 2 seconds, until the LED lights orange. 2 Release the keys. The keys must be released within second after the LED lights orange, otherwise All Reset Mode will cancel. The transceiver announces Confirm and returns to normal operation. OPTIONAL ACCESSORIES KMC-7 (Speaker/ microphone) KMC-2 (Speaker/ microphone) KHS- (Headset) KHS-22 (Headset) KNB-45L (Li-ion battery pack) KSC-35 (Rapid charger) KSC-356 (Multiple charger) KBH-0 (Belt clip) KWR- (Water resistant bag) 26 Radio FRequency eneRgy SaFety inFoRmation This Kenwood transceiver has been tested and complies with the standards listed below, in regards to Radio Frequency (RF) energy and electromagnetic energy (EME) generated by the transceiver. FCC RF exposure limits for Occupational Use Only. RF Exposure limits adopted by the FCC are generally based on recommendations from the National Council on Radiation Protection and Measurements, & the American National Standards Institute. FCC OET Bulletin 65 Edition 97-01 Supplement C American National Standards Institute (C95.1 1992) American National Standards Institute (C95.3 1992) This Kenwood transceiver generates RF EME while transmitting. RF EME (Radio Frequency Electric &
Magnetic Energy) has the potential to cause slight thermal, or heating effects to any part of your body less than the recommended distance from this radio transmitters antenna. RF energy exposure is determined primarily by the distance to and the power of the transmitting device. In general, RF exposure is minimized when the lowest possible power is used or transmission time is kept to the minimum required for consistent communications, and the greatest distance possible from the antenna to the body is maintained. The transceiver has been designed for and is classified for Occupational Use Only. Occupational/ controlled exposure limits are applicable to situations in which persons are exposed to RF energy as a consequence of their employment, and such persons have been made aware of the potential for exposure and can exercise control over their exposure. This means you can use the transceiver only if you are aware of the potential hazards of operating a transceiver and are familiar in ways to minimize these hazards. This transceiver is not intended for use by the general public in uncontrolled environments. Uncontrolled environment exposure limits are applicable to situations in which the general public may be exposed to RF energy, or in which the persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. The following list provides you with the information required to ensure that you are aware of RF exposure and of how to operate this transceiver so that the FCC RF exposure limitations are not exceeded. While transmitting (holding the PTT switch or speaking with VOX enabled), always keep the antenna and the radio at least 3 cm (1 3/16 inches) from your body or face, as well as from any bystanders. A LED on the top of the radio shows red when the transmitter is operating in both PTT and VOX modes. Do not transmit for more than 50% of the total transceiver use time; transmitting over 50% of the total use time may exceed the limits in accordance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time. Use only the specified antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by Kenwood. Use only Kenwood authorized accessories (antennas, battery packs, belt clips, Speaker/ Mics or headsets etc.): When worn on the body, always place the radio in a Kenwood recommended clip or carrying case meant for this product. The use of other than recommended or approved body- worn accessories may result in RF exposure levels which exceed the FCCs occupational/ controlled environment RF exposure limits. To ensure that your exposure to RF EME is within the FCC limits for occupational use, you must observe and adhere to the above points. Electromagnetic Interference Compatibility Electronic devices are susceptible to electromagnetic interference (EMI) if they are not adequately shielded or designed for electromagnetic compatibility. Because this transceiver generates RF energy, it can cause interference to such equipment. Turn OFF your transceiver where signs are posted to do so. Hospitals and health care facilities use Turn OFF your transceiver while on board an aircraft when so instructed. Use of the transceiver must B59-2546-00 equipment that is sensitive to electromagnetic radiation. be in accordance with airline regulations and/or crew instructions.
1 | RF Safety Manual | Users Manual | 691.87 KiB | March 08 2009 / May 08 2009 |
Radio FRequency eneRgy SaFety inFoRmation This Kenwood transceiver has been tested and complies with the standards listed below, in regards to Radio Frequency (RF) energy and electromagnetic energy (EME) generated by the transceiver. FCC RF exposure limits for Occupational Use Only. RF Exposure limits adopted by the FCC are generally based on recommendations from the National Council on Radiation Protection and Measurements, & the American National Standards Institute. FCC OET Bulletin 65 Edition 97-01 Supplement C American National Standards Institute (C95.1 1992) American National Standards Institute (C95.3 1992) This Kenwood transceiver generates RF EME while transmitting. RF EME (Radio Frequency Electric &
Magnetic Energy) has the potential to cause slight thermal, or heating effects to any part of your body less than the recommended distance from this radio transmitters antenna. RF energy exposure is determined primarily by the distance to and the power of the transmitting device. In general, RF exposure is minimized when the lowest possible power is used or transmission time is kept to the minimum required for consistent communications, and the greatest distance possible from the antenna to the body is maintained. The transceiver has been designed for and is classified for Occupational Use Only. Occupational/ controlled exposure limits are applicable to situations in which persons are exposed to RF energy as a consequence of their employment, and such persons have been made aware of the potential for exposure and can exercise control over their exposure. This means you can use the transceiver only if you are aware of the potential hazards of operating a transceiver and are familiar in ways to minimize these hazards. This transceiver is not intended for use by the general public in uncontrolled environments. Uncontrolled environment exposure limits are applicable to situations in which the general public may be exposed to RF energy, or in which the persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. The following list provides you with the information required to ensure that you are aware of RF exposure and of how to operate this transceiver so that the FCC RF exposure limitations are not exceeded. While transmitting (holding the PTT switch or speaking with VOX enabled), always keep the antenna and the radio at least 3 cm (1 3/16 inches) from your body or face, as well as from any bystanders. A LED on the top of the radio shows red when the transmitter is operating in both PTT and VOX modes. Do not transmit for more than 50% of the total transceiver use time; transmitting over 50% of the total use time may exceed the limits in accordance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time. Use only the specified antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by Kenwood. Use only Kenwood authorized accessories (antennas, battery packs, belt clips, Speaker/ Mics or headsets etc.): When worn on the body, always place the radio in a Kenwood recommended clip or carrying case meant for this product. The use of other than recommended or approved body- worn accessories may result in RF exposure levels which exceed the FCCs occupational/ controlled environment RF exposure limits. To ensure that your exposure to RF EME is within the FCC limits for occupational use, you must observe and adhere to the above points. Electromagnetic Interference Compatibility Electronic devices are susceptible to electromagnetic interference (EMI) if they are not adequately shielded or designed for electromagnetic compatibility. Because this transceiver generates RF energy, it can cause interference to such equipment. Turn OFF your transceiver where signs are posted to do so. Hospitals and health care facilities use Turn OFF your transceiver while on board an aircraft when so instructed. Use of the transceiver must B59-2546-00 equipment that is sensitive to electromagnetic radiation. be in accordance with airline regulations and/or crew instructions.
1 | Revised Manual | Users Manual | 76.29 KiB | / May 08 2009 |
Thank You We are grateful for your purchase of this Kenwood product and welcome you to the Business Radio Service (BRS). Your Kenwood 2-way Business Radio is called a transceiver, meaning transmitter & receiver. We believe this easy-to-
use transceiver will provide you with dependable and reliable communications. This Kenwood transceiver is a precision device. Treat it with care, and you will enjoy years of reliable operation. Models Covered bY This Manual TK-2300 (K): 4-channel VHF FM Transceiver TK-3300 (K): 4-channel UHF FM Transceiver TK-2300 (K2): 16-channel VHF FM Transceiver TK-3300 (K2): 16-channel UHF FM Transceiver FeaTures 4 channels (K) or 16 channels (K2) with 27 VHF operating frequencies (TK-2300) or 89 UHF operating frequencies
(TK-3300) and 122 tone/ code settings for each channel allowing you to ignore unwanted calls. Built in voice scrambler gives you complete privacy for your conversations.
<For Part 95 user, this feature is disabled by the dealer.>
Hands free operation when using an optional headset. Voice announcement lets you know which channel you have selected and which settings you have made when reassigning key functions and channel settings. KEY ASSIGNMENT MODE This transceiver allows you to reprogram the Side 1 and Side 2 keys with any of the functions listed in the table below. Explanations on the use of each function are provided under ProgrammablE FuncTions, on page 22. Table Number Function Name 0 1 2 3 4 5 6 7 8 9 10 11 12 13 none (no function) calling alert Key lock Key lock with status memory monitor monitor momentary scan scan + Temporary Delete (Side 2 key default) scrambler *
squelch off squelch off momentary Temporary Delete super lock (Side 1 key default) low Transmit Power
* For Part 95 user, this feature is disabled by the dealer. 20 Scan scan is useful for monitoring signals on the transceiver channels. When scanning, the transceiver checks for a signal on each channel and only stops if a signal is present. if the QT/DQT matches, the transceiver stops at the channel and opens the squelch so you can listen to the call. if the QT/DQT does not match, the call is ignored and scanning continues. Scan + Temporary Delete (Side 2 key default) Press this key to start scanning the transceiver channels. When scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for 3 seconds. Scrambler Press this key to activate (a single beep sounds) and deactivate (a double beep sounds) the scrambler function of the selected channel. The scrambler function allows you to hold a conversation in complete privacy. When the scrambler function is activated, any other party that is listening to your channel will be unable to understand your conversation.
<For Part 95 user, this feature is disabled by the dealer.>
Squelch Off Press this key to hear background noise. Press the key again to return to normal operation. Squelch Off Momentary Press and hold this key to hear background noise. release the key to return to normal operation. Temporary Delete When scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for 1 second. 23
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-08-05 | 450 ~ 470 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-08-05
|
||||
1 | Applicant's complete, legal business name |
Kenwood USA Corporation
|
||||
1 | FCC Registration Number (FRN) |
0004356960
|
||||
1 | Physical Address |
3970 Johns Creek Court
|
||||
1 |
Suwanee, Georgia 30024
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@metlabs.com
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ALH
|
||||
1 | Equipment Product Code |
413603
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
D****** W********
|
||||
1 | Title |
Senior Product Planning & Development Manager
|
||||
1 | Telephone Number |
67847********
|
||||
1 | Fax Number |
67847********
|
||||
1 |
d******@us.jvckenwood.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | UHF FM Portable Transceiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to the specific belt-clip for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are - Face: 1.62 W/kg; Body-worn: 2.94 W/kg. The output power is continuously variable between 1W and 2W. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compliance Testing, LLC
|
||||
1 | Name |
M**** S******
|
||||
1 | Telephone Number |
480-9********
|
||||
1 | Fax Number |
480 9********
|
||||
1 |
m******@compliancetesting.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | 450 | 470 | 2 | 2.5 ppm | 16K0F3E | ||||||||||||||||||||||||||||||||||
1 | 2 | 9 | 450 | 470 | 2 | 2.5 ppm | 11K0F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC