KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 INSTRUCTION MANUAL TK-2212-1/TK-3212-1/TK-3212-2 THANK YOU!
We are grateful you chose KENWOOD for your land mobile radio applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency. KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. NOTICES TO THE USER WARNING:
GOVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED RADIO TRANSMITTERS WITHIN THE TERRITORIES UNDER GOVERNMENT CONTROL. ILLEGAL OPERATION IS PUNISHABLE BY FINE OR IMPRISONMENT OR BOTH. REFER SERVICE TO QUALIFIED TECHNICIANS ONLY. DO NOT OPERATE YOUR TRANSCEIVER IN EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, ETC.). TURN OFF YOUR TRANSCEIVER WHILE TAKING ON FUEL, OR WHILE PARKED IN GASOLINE SERVICE STATIONS. SAFETY:
It is important that the operator is aware of and understands hazards common to the operation of any transceiver. WARNING:
EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn off your transceiver while taking on fuel, or while parked in gasoline service stations. One or more of the following statements may be applicable:
FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. I ncrease the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer for technical assistance. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 ATTENTION (U.S.A. Only):
The RBRC Recycle seal found on KENWOOD nickel-metal hydride (Ni-MH) battery packs indicates KENWOODs voluntary participation in an industry program to collect and recycle Ni-MH batteries after their operating life has expired. The RBRC program is an alternative to disposing Ni-MH batteries with your regular refuse or in municipal waste streams, which is illegal in some areas. For information on Ni-MH battery recycling in your area, call (toll free) 1-800-8-BATTERY
(1-800-822-8837). KENWOODs involvement in this program is part of our commitment to preserve our environment and conserve our natural resources. UNPACKING AND CHECKING EQUIPMENT Note:
The following unpacking instructions are for use by your KENWOOD dealer, an authorized KENWOOD service facility, or the factory. Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. Accessories Item Instruction Manual Instruction Manual Belt Hook Screw Set Cap Holder Helical Antenna Whip Antenna Whip Antenna Battery Assy. Charger AC Adapter Pamphlet Part Number B62 1817 - *0 B62 1846 - *0 J29 0712 - *5 N99-2043 - *5 B09 0680 - *3 J19 5472 - *3 T90 1036 - *5 T90 1039 - *5 T90 1040 - *5 W09 1000 - *5 W08 0969 - *5 W08 0970 - *5 B59 2391 - *0 Quantity TK-2212-1 TK-3212-1 TK-3212-2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 Installing/ Removing the Optional Battery Pack PREPARATION The battery pack is not charged at the factory; charge it before use. CAUTION:
DO NOT RECHARGE THE BATTERY PACK IF IT IS ALREADY FULLY CHARGED. DOING SO MAY CAUSE THE LIFE OF THE BATTERY PACK TO SHORTEN OR THE BATTERY PACK MAY BE DAMAGED. AFTER RECHARGING THE BATTERY PACK, DISCONNECT IT FROM THE CHARGER. IF THE CHARGER POWER IS RESET (TURNED ON AFTER BEING TURNED OFF), RECHARGING WILL START AGAIN AND THE BATTERY PACK WILL BECOME OVERCHARGED. DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE OF THE BATTERY BY FIRE. NEVER ATTEMPT TO REMOVE THE CASING FROM THE BATTERY PACK. 1 Match the guides of the battery pack with the corresponding grooves on the upper rear of the transceiver, then firmly press the battery pack t 2 To remove the battery pack, lift the safety catch, press the release latch, then pull the battery pack away from the transceiver. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 Installing the Antenna Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. Installing the Belt Clip Using the 2 screws, affix the belt clip in place. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 Installing the Cap over the Speaker/Microphone Jacks If you are not using an optional speaker/ microphone, install the cap over the SP/MIC jacks using the supplied screw. Note:
To keep the transceiver water resistant, you must cover the SP/MIC jacks with the cap or the cap or the speaker/microphone connector. Installing the Optional Speaker/ Microphone 1 Insert the speaker/ microphone plugs into the SP/MIC jacks. 2 Install the speaker/microphone locking Holder over the plugs using the supplied screw. KENWOOD CORPORATION GETTING ACQUAINTED Knob TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 NO. Name 1 2 Power switch/
Volume control Selector switch PTT PF1 PF2 Switch
< Left side >
NO. Name 1 2 3 PTT Side 1 Side 2
< Front >
NO. Name 1 2 3 4 S A
<B C>
Lock/
Non Lock Lock/
Non Lock Description Power SW (CCW : Power OFF) Audio Volume adjuster Lock Channel Selector Selectable knob Volume C
<B A S Fig. 1 Left Side Fig.2 Front Lock/
Non Lock Non Lock TX ON/OFF Description Non Lock Programmable default : No Function Non Lock Programmable default : Monitor Momentary Lock/
Non Lock Non Lock Programmable default : No Function Description Non Lock Programmable default : No Function Non Lock Programmable default : Channel Up Non Lock Programmable default : Channel Down KENWOOD CORPORATION LED TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 NO. Name Description The LED is three colors. Lights green while receiving at user mode. Lights red while transmitting, flashes red when the battery power is low while transmitting. Lights orange when individual called. 1 LED LCD Display Icon P L
(Left)
(Right)
(Left)
(Right) Function Monitor Call Indicator Talk Around Scan Message Stack ( FleetSync ) Priority Channel Scrambler RF Power Low Zone Add Channel Add VOX AUX Battery Indicator KENWOOD CORPORATION TERMINAL SP/MIC jacks SP/MIC covering for blindfold mode of resin is possible. TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 NO. Name Description PTT/RXD 1 2 MIC 3 MIC IN 4 5 6 7 8 9 10 OPTDET 5MS AE TXD NC SPO SPI PTT input / Serial data input MIC input To internal MIC Option Detect 5V output Audio Earth Serial data output No Connect AF power output To internal SP Its type of spring plate. The minus terminal connect to chassis ground Its mounted to rear side of radio and mounting instruction is slide method. Battery Terminal OTHER Rear Bottom A rail and a hook for battery installation. Space which affixes name plate. Model name plate Screw holes for belt hook installation. Battery release lever
I/O I I I O
O
O
KENWOOD CORPORATION Appearance TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 OPERATING BASICSATINGBASICS Switching Power ON/OFF Turn the Power switch/ Volume control clockwise to switch the transceiver ON. Turn the Power switch/ Volume control counterclockwise to switch the transceiver OFF. Adjusting the Volume Rotate the Power switch/ Volume control to adjust the volume. Selecting a Channel Rotate the Channel selector to select a channel. Clockwise increases the channel number and counterclockwise decreases it. Making a Call 1 Select the desired channel. 2 Press and hold the PTT switch, then speak into the microphone in your normal voice. For best results, hold the microphone approximately 3 to 4 cm (1 1/2 inches) from your lips. 4 Release the PTT switch to receive. AUXILIARY FEATURES Time-out Timer (TOT) The TOT is used to automatically inhibit transmission after a specified time elapse. If the PTT switch is held down for longer than specified time, the transceiver will stop transmitting and a tone will sound. Release the PTT switch, then press it again to continue transmitting. RADIO FREQUENCY ENERGY SAFETY INFORMATION This KENWOOD transceiver has been evaluated and complies with the standards listed below, in regards to Radio Frequency (RF) energy and electromagnetic energy (EME) generated by the transceiver. FCC RF exposure limits for Occupational Use Only. RF Exposure limits adopted by the FCC are generally based on recommendations from the National Council on Radiation Protection and Measurements, & the American National Standards Institute. FCC OET Bulletin 65 Edition 97-01 Supplement C American National Standards Institute (C95.1 1992) American National Standards Institute (C95.3 1992) This KENWOOD transceiver generates RF EME while transmitting. RF EME (Radio Frequency Electric &
Magnetic Energy) has the potential to cause slight thermal, or heating effects to any part of your body less than the recommended distance from this radio transmitters antenna. RF energy exposure is determined primarily by the distance to and the power of the transmitting device. In general, RF exposure is minimized when the lowest possible power is used or transmission time is kept to the minimum required for consistent communications, and the greatest distance possible from the antenna to the body is maintained. The transceiver has been designed for and is classified for Occupational Use Only. Occupational/ controlled exposure limits are applicable to situations in which persons are exposed to RF energy as a consequence of their employment, and such persons have been made aware of the potential for exposure and can exercise control over their exposure. This means you can use the transceiver only if you are aware of the potential hazards of operating a transceiver and are familiar in ways to minimize these hazards. This transceiver is not intended for use by the general public in uncontrolled environments. Uncontrolled environment exposure limits are applicable to situations in which the general public may be exposed to RF energy, or in which the persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. The following list provides you with the information required to ensure that you are aware of RF exposure and of how to operate this transceiver so that the FCC RF exposure limitations are not exceeded. While transmitting (holding the PTT switch), always keep the antenna and the radio at least 3 cm (1 3/16 inches) from your body or face, as well as from any bystanders. Do not transmit for more than 50% of the total transceiver use time; transmitting over 50% of the total use time may exceed the limits in accordance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time. Use only the specified antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by KENWOOD. Use only KENWOOD authorized accessories (antennas, battery packs, belt clips, Speaker/ Mics or headsets etc.): When worn on the body, always place the radio in a KENWOOD recommended clip or carrying case meant for this product. The use of other than recommended or approved body- worn accessories may result in RF exposure levels which exceed the FCCs occupational/ controlled environment RF exposure limits. To ensure that your exposure to RF EME is within the FCC limits for occupational use, you must observe and adhere to the above points. Electromagnetic Interference Compatibility Electronic devices are susceptible to electromagnetic interference (EMI) if they are not adequately shielded or designed for electromagnetic compatibility. Because this transceiver generates RF energy, it can cause interference to such equipment. Turn OFF your transceiver where signs are posted to do so. Hospitals and health care facilities use equipment that is sensitive to electromagnetic radiation. Turn OFF your transceiver while on board an aircraft when so instructed. Use of the transceiver must be in accordance with airline regulations and/or crew instructions. B59-2391-00 RF Safety Info A6 (B59-2391-00) 1 04.5.20, 9:06 AM