NO.: 84491 INSTRUCTION dddiel eels res FULL LIGHTING 3 SOUND MULTI-
FUNCTION EFFECT EFFECT PLAYERS 6 age PRESS BUTTON ry o fe o iS / | BATTERY REQUIREMENTS:
eee ray 3 x AAA a ae me (Not Included) COLOR SHIFTING ACTION
-RC Vehicle (Vehicle) x 1
-RC Transmitter (Transmitter) x 1
-Instruction Manual x 1 RANGE oe Se 0UlUltt~ OB ff (Tarts ea at eT) RC Transmitter (Transmitter) x 1 RC Vehicle (Vehicle) x 1 Battery Precaution 1. Alkaline batteries are recommended to be used 8. Be sure to insert batteries with correct polarities and always follow the battery 2. Only batteries of the same or equivalent type as recommended are to be used manufacturers instructions 3. Do not mix alkaline, standard or rechargeable batteries 9. Remove all batteries from the Vehicle and Transmitter when not in use 4. Do not mix old and new batteries or different type of batteries 10. Exhausted batteries are to be removed from the product 5. Non-rechargeable batteries are not to be charged 11. The supply terminals are not to be short-circuited 6. If rechargeable batteries are to be used, they are only to be charged by adult 12. Dispose of batteries properly. Do not dispose the batteries in fire it may 7. Rechargeable batteries are to be removed from the product before they cause them to explode or leak causing injury or damage are charged 13. Battery installation and removal must only be done by adult
| Battery Installation = ara el IE La tela) For Vehicle (Fig. 1 and Fig. 2) For Transmitter (Fig. 3 and Fig. 4) 1. Switch OFF the power 1. Unscrew the screw on the battery cover 2. Unscrew the screw on the battery cover 2. Open the battery cover 3. Open the battery cover 3. Install 2 new 1.5V AAA batteries with correct polarities (+/-) 4. Install 5 new 1.5V AA batteries with correct polarities (+/-) as as shown inside the battery compartment shown inside the battery compartment 4. Close the battery cover 5. Close the battery cover 5. Tighten the screw on the battery cover 6. Tighten the screw on the battery cover Transmitter LED Battery {|
Direction Indicator Adjustment ON/OFF/
Try-me Switch Battery | | | Steering Compartment Accelerator Wheel Trigger How to Bind (pair up the Transmitter and Vehicle) 1. Install batteries to the Vehicle, switch ON the Vehicle. 2. Install batteries to the Transmitter, the LED on the Transmitter will flash, when it is paired up with the Vehicle, the LED on the Transmitter will stop flashing. 3. If the process is not completed, please re-do the pair up process. 4. As long as the batteries in both the Vehicle and Transmitter are not removed. There is no need for pair up process after switching OFF the Vehicle. Just switch ON the Vehicle and it will be still paired up with the Transmitter. 5. In case of losing the pair up, please re-do the pair up process. Backward On) ON/OFF/
25 | Try-me Switch 4. Press the button on the Transmitter to trigger the light &
sound of the Vehicle Press the button on the Vehicle to trigger the light &
sound of the Vehicle When the light & sound is playing, press & hold the button on the Transmitter for 3 seconds to stop it If the Vehicle does not run in straight line, adjust the direction adjustment on the Vehicle chassis (Fig. 1). Play on smooth surface for optimum performance. Remember to switch OFF the power of the Vehicle after playing. 10. The optimum control range is up to 20m outdoor. Co 2 @ YF Performance Tips 1. Do not drive on grass, dirt, sand, dusts, carpet or go through water. See TN Ce ES ; ; ;
2. Do not drive in windy or rainy weather. 1. Do not attempt to disassemble the Vehicle or Transmitter 3. Avoid direct impact the Vehicle with obstacles. 2. Make sure the batteries are installed with correct polarities (+/-) as shown inside the 4. Sitch OFF the power when not in use to prevent damage of Vehicle due to leakage battery compartment of electrolyte from batteries. F Pe fi 5. Remove all batteries from the Vehicle and Transmitter when not in use for long period. ss R ann an and ede ML la 6. Keep fingers, hair and loose clothing away from wheels. La een
% Low Vottage oF bate Nos be affected by a vatiely of factors. The packaging and instruction manual contain important information. Please keep them
: : : ; : LOMO Moonen b) Interfe fi ther it that emit radio fi Is.
) Outdoor usage is recommended in order to get optimum control range. Warning! Choking Hazard. Not suitable for children under the age of 3 years due to 9. Recommend to play the vehicle on a clean and smooth surface. Surette 10. Clean the battery compartment to make sure it is free from dust to prevent poor We reserve the right to improve/amend specifications and colors without notice. contact of batteries. Warning! The Antenna of vehicle and/or transmitter is/are not to be inserted into socket outlets. FCC label compliance statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RSS-210 Compliance Statement:
This radiocommuication device complies with all the requirements of Industry Canada Standard RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. , ; .
'y Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : 1) l'appareil ne doit pas al%, produire de brouillage; 2) l'appareil doit accepter tout Pan! [a]
brouillage radiolectrique subi, mme si le brouillage TFS =
est susceptible den compromettre le fonctionnement. ]
Declaration of Conformity The product is in conformity with the requirement of EU Directive 2014/53/EU. Environmental notes:
The whole product also does not belong to household waste at the end of the product life. You can return it at collection points for the recycling of electronic and electronical instruments The symbol on the item, instruction manual, hangtag or packing is showing this clearly. [a]
Materials should be recycled according to their respective markings. Recycling of old devices or other re-use of materials contained therein represents an important www.kidztech.net contribution to environmental protection. a Please ask at your local community for the correct collection point. Disposal of batteries Batteries should not be disposed of in the household waste. As the consumer you are legally obliged to return batteries containing harmful substances and all other used batteries. You can hand in your old batteries at public collection points in your area or wherever batteries are sold. You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing Conforms to the safety requirements of ASTM F963 harmful substances:
Pb=Battery contains lead . KIDZTECH TOYS MANUFACTURING LTD. Cd=Battery contains cadmium Room 1201,12/F, Inter-Continental Plaza, Hg=Battery contains mercury 94 Granville Road, TST East, Hong Kong. Tel: (852) 27218868 = info@kidztech.net Made in China _http:/Awww.kidztech.net 20180518