MLWG2 Getting Started Step 1 Charge your MLWG2 Device Before using, make sure your MLWG2 is fully charged. To charge, connect the included USB cable to your MLWG2s mini USB port (1) and the other end into an available USB port on your computer or to a USB wall adapter. The green power light will stop _ashing when MLWG2 is fully charged. Step 2 Add Content to your MLWG2 Windows users: When connecting your MLWG2 to your computer, two drive letters will appear in Windows Explorer one Read-Only labeled CDROM and one Removable Disk labeled MLWG2 Double-click on the drive labeled MLWG2 to add your content. Transfer your _les the same as you would for any USB drive; drag or copy _les from your computer to your MLWG2 device Mac users: By default when connecting your MLWG2 to your computer, two drives will appear on your desktop one Read-Only labeled CDROM and one Removable Disk labeled MLWG2 Double-click on the drive labeled MLWG2 to add your content. Transfer your _les the same as you would for any USB drive; drag or copy _les from your computer to your MLWG2 device.
(It is recommended that you organize your content by creating folders, e.g., Videos, Music, Pictures and Documents) Step 3 Download Kingstons Free MLWG2 App from the App Store Visit Apples App Store and search for Kingston MLWG2. Figure 1 Kingstons MLWG2 App Icon Step 4 Power on the MLWG2 by pressing the On/Off button
(2).*
*Note: After you power on, wait for Blue Wi-Fi Activity Light to start _ashing before proceeding to the next step(3). Step 5 Go to the Settings icon on your iPad, iPhone, or iPod touch and select Wi-Fi. Con_rm that Wi-Fi is ON. Select Kingston MLWG2 under Choose a Network and click on it to connect to it. Step 6 Once connected, open the Kingston MLWG2 app on your iPad, iPhone, or iPod touch and enjoy your new expanded storage. Step 7 Share your content with as many as three users by having them follow steps 3 to 6. MLWG2 1- MLWG2 MLWG2 USB MLWG2 miniUSB (1)USB USB MLWG2 2- MLWG2 Windows MLWG2 Windows
-CDROM MLWG2 MLWG2 USB MLWG2 Mac MLWG2 Windows
-CDROM MLWG2 MLWG2 USB MLWG2 (
) 3- App Store( Kingston MLWG2 Apple App Store(Kingston MLWG2 4 On/Off (2) MLWG2
* Wi-Fi (3) 5 iPadiPhone iPod touch Wi-Fi Wi-Fi Kingston MLWG2 6 iPadiPhone iPod touch Kingston MLWG2 MLWG2 7 3 6 MLWG2 NCC FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
1.Reorient the receiving antenna. 2.Increase the separation between the equipment and receiver. 3.Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. 4.Consult the dealer or an experienced radio/TV technician for help. Any special accessories needed for compliance must be specified in the instruction manual. Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Required notices to the User of Canada (RSS) Radio apparatus shall comply with the requirements to include required notices or statements to the user of equipment with each unit of equipment model offered for sale. The required notices are specified in the RSS documents (including RSS-Gen) applicable to the equipment model. These notices are required to be shown in a conspicuous location in the user manual for the equipment, or to be displayed on the equipment model. If more than one notice is required, the equipment model(s) to which each notice pertains should be identified. Suppliers of radio apparatus shall provide notices and user information in both English and French. IC statementThis Class B digital apparatus complies with Canadian ICES003.Cet appareil