Landis+Gyr Network Bridge N2200/N2250 Data Sheet Publication: 98-1822 Rev AA LANDIS+GYR CONFIDENTIAL INFORMATION Draft Limitation on Warranties and Liability Information in this document is subject to change without notice. This manual or any part of it thereof may not be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr. In no event will Landis+Gyr be liable for any incidental, indirect, special, or consequential damages (including lost profits) arising out of or relating to this publication or the information contained in it, even if Landis+Gyr has been advised, knew, or should have known of the possibility of such damages. 2019 Landis+Gyr, Inc. All Rights Reserved Covered by both issued and pending patents. For further patent information see: https://www.landisgyr.com/about/patent-notices/
Landis+Gyr Network Bridge N2200/N2250 Data Sheet Revision AA Description Draft - Work in Progress Author Vicky Costello Publication: 98-1822 Rev AA Revision History Modification Date 2019 Landis+Gyr All rights reserved Contact Us:
Landis+Gyr technical support:
1-888-390-5733 solutionsupport.na@landisgyr.com To provide feedback about this documentation, contact the Technical Documentation team at:
ustechnicaldocumentation@landisgyr.com. Draft Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Product Overview The Landis+Gyr Network Bridge provides the basis for a powerful RF wireless mesh network for remote data collection and end-device monitoring and control. The Network Bridge supports full two-way peer-to-peer communication to all devices within the network. The Network Bridge offers advanced functionality, such as individual message prioritization, additional memory for localized intelligence, and it is based on the Linux operating system. The N2200 (RF Mesh)/N2250 (RF Mesh IP) provides interface and control to distribution equipment and critical devices that require low latency. Figure 1 - 1. N2200/N2250 Network Bridge In addition to the standard RF Mesh and RF Mesh IP radios, the N2200/N2250 has one internal slot that can be fitted with LTE wireless or other future WAN technologies. The N2200/N2250 comes equipped with two serial and two Ethernet ports, and WiFi for configuration. Landis+Gyr's Network Bridge/Network Gateway Platform offers a family of Field Area Network Devices that can be configured and deployed to build a robust communication network infrastructure, enabling communication to edge devices in the field. NOTE: Network Bridge, N2250 (RF Mesh IP), can support the Wi-SUN Field Area Network (FAN) profile through over-the-air (OTA) firmware upgrades. Data Sheet 98-1822 Rev AA 3 Draft Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Landis+Gyr FCC ID Labels FCC ID Label content is shown in Figure 2 and is required for RF Mesh (2200) and RF Mesh IP (2250). If the X in N22X0, is 0, then this label would be for RF Mesh. If X is 5, then it would be for RF Mesh IP. CUID Details Figure 2. FCC ID Label Figure 3. CUID Details 4 98-1822 Rev AA Data Sheet Draft Landis+Gyr Dimensions Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Data Ports Pin-Out Figure 4. Network Bridge Physical Dimensions (mm) Figure 5. Data Ports Pin-Out Data Sheet 98-1822 Rev AA 5 Draft Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Landis+Gyr N2200/N2250 Specifications Product Specifications Table 1 lists the general product specifications for the N2200 (RF Mesh)/N2250 (RF Mesh IP) Network Bridge Series. Table 1. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Product Specifications Element Electrical (General) Input Voltage Range Current Processing Unit CPU Clock Speed RAM Memory FLASH Memory Ethernet ETH 0 ETH 1 WIFI LTE Cat6 (US Only-ATT and Verizon) Mechanical Enclosure Dimensions Weight Operating Temperature Range Storage Temperature Range Limited Lifetime Life Description 12-24 VDC +/- 20% (9.6-28.8 VDC) 1.66A-0.83A Cortex A5 536 MHz 512 MB DDR2 RAM 2 GB NAND + 4 GB External 10/100/1000 Ethernet 10/100 Ethernet Yes Yes Black Anodized Aluminum, IP41 (ingress protection from dripping condensation and solid material larger than 1mm) 55.20mm W X 120.00mm D X 112.10mm H
(2.17" W x 4.72" D x 4.41" H 1.10 lbs (0.50 kg)
-40C to 60C (-40 to 140F)
-40C to 85C (-40 to 185F) 20 years 6 98-1822 Rev AA Data Sheet Draft Landis+Gyr Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Radio Specifications Americas Table 2 lists the radio specifications for the N2200 (RF Mesh)/N2250 (RF Mesh IP) Network Bridge Series for Americas. Table 2. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Radio Specifications Americas Element Radio (General) Radio Model Communication Protocol (PHY) RF Frequency Range Channel Spacing RF Data Rate Bridge Radio Processing Unit CPU Clock Speed RAM Memory FLASH Memory ROM Memory Receiver RF Mesh IP:
Sensitivity (at 90% packet success rate, conducted, typical) Adjacent Channel Rejection Alternate Channel Rejection RF Mesh:
Sensitivity (at 90% packet success rate, conducted, typical) Adjacent Channel Rejection Alternate Channel Rejection Transmitter Description Model: NIC AM IEEE 802.15.4g - SUN FSK PHY North America: 902-928 MHz Brazil: 902-907.5, 915-928 MHz N2250 (RF Mesh IP): 400 KHz N2200 (RF Mesh): 100, 300 KHz N2250 (RF Mesh IP): 50, 150, 200 Kbps N2200 (RF Mesh): 9.6, 19.2, 38.4, 115.2 Kbps Dual-core Cortex M4 120 MHz 304 Kbytes 2 MB + 4MB External 8 Kbytes
-107 dBm(50 Kbps)
-100 dBm(150 Kbps)
-98 dBm(200 Kbps) 30 dB Typical 35 dB Typical
-113 dBm(9.6 Kbps)
-110 dBm(19.2 Kbps)
-107 dBm(38.4 Kbps)
-101 dBm (115.2 Kbps) 30 dB 35 dB Data Sheet 98-1822 Rev AA 7 Draft Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Landis+Gyr Table 2. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Radio Specifications Americas (Continued) Element Output Power (at Antenna Connector) Modulation Type Out-of-band Spurious Emissions Antennas Approved Type Peak Gain Description 50 mW to 820 mW 2FSK, 2GFSK
< -50 dBc Vertically-Oriented Whip 5.5dBi Whip, Skywave MMG-11, Rev B 5.5dBi Gain, 902-928 MHz, 50 ohms Type Peak Gain Vertically-Oriented Dipole 5.15dBi Dipole, Laird FG9023 5.15dBi Gain, 902-928 MHz, 50 ohms Type Peak Gain Vertically-Oriented Monopole 5.15dBi Monopole, Skywave 11-1106E 5.15dBi Gain, 902-928 MHz, 50 ohms 8 98-1822 Rev AA Data Sheet Draft Landis+Gyr Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Radio Specifications India Table 3 lists the radio specifications for the N2200 (RF Mesh)/N2250 (RF Mesh IP) Network Bridge Series for India. Table 3. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Radio Specifications India Element Radio (General) Radio Model Description Model: NIC IN Communication Protocol (PHY) IEEE 802.15.4-2015 - SUN FSK PHY RF Frequency Range Channel Spacing RF Data Rate Bridge Radio Processing Unit CPU Clock Speed RAM Memory FLASH Memory ROM Memory Receiver RF Mesh IP:
Sensitivity (at 90% packet success rate, conducted, typical) Adjacent Channel Rejection Alternate Channel Rejection RF Mesh:
Sensitivity (at 90% packet success rate, conducted, typical) Adjacent Channel Rejection Alternate Channel Rejection Transmitter Output Power (at Antenna Connector) Modulation Type 865-867 MHz N2250 (RF Mesh IP): 200 KHz N2200 (RF Mesh): 100 KHz N2250 (RF Mesh IP): 50, 150 Kbps N2200 (RF Mesh): 9.6, 19.2, 38.4 Kbps Dual-core Cortex M4 120 MHz 304 Kbytes 2 MB + 4MB External 8 Kbytes
-107 dBm(50 Kbps)
-100 dBm(150 Kbps) 30 dB 35 dB
-113 dBM(9.6 Kbps)
-110 dBm(19.2 Kbps)
-107 dBm(38.4 Kbps) 30 dB 35 dB 50 mW to 1W 2FSK, 2GFSK Data Sheet 98-1822 Rev AA 9 Draft Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Landis+Gyr Table 3. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Radio Specifications India(Continued) Element Out-of-band Spurious Emissions Antenna Requirements Type Peak Gain Description
<-50 dBc Vertically-oriented whip
<5.5 dBi 10 98-1822 Rev AA Data Sheet Draft Landis+Gyr Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Radio Specifications Hong Kong Table 4 lists the radio specifications for the N2250 (RF Mesh IP) Network Bridge Series for Hong Kong. Table 4. Network Bridge N2250 (RF Mesh IP) Radio Specifications Hong Kong Element Radio (General) Radio Model Communication Protocol (PHY) RF Frequency Range Channel Spacing RF Data Rate Bridge Radio Processing Unit CPU Clock Speed RAM Memory FLASH Memory ROM Memory Receiver RF Mesh IP:
Sensitivity (at 90% packet success rate, conducted, typical) Adjacent Channel Rejection Alternate Channel Rejection Transmitter Output Power (at Antenna Connector) Modulation Type Out-of-band Spurious Emissions Antenna Requirements Type Peak Gain Description Model: NIC HK IEEE 802.15.4g 920-925 MHz 400 KHz 50, 150, 200 Kbps Dual-core Cortex M4 120 MHz 304 Kbytes 2 MB + 4MB External 8 Kbytes
-107 dBM(50 Kbps)
-100 dBm(150 Kbps)
-98 dBm(200 Kbps) 30 dB 35 dB 50 mW to 1W 2FSK, 2GFSK
<-20 dBm ERP Vertically-oriented whip
< 2 dBi Data Sheet 98-1822 Rev AA 11 Draft Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Landis+Gyr Regulatory Compliance Safety and EMC Table 5. Regulatory Standards Compliance: Safety and EMC Specification Safety - Certification pending to:
EMC - Certification pending to:
Description IEC 60950-1:2005Ed.2+A2012;C2012 UL 60950-1:2007Ed.2+R:14Oct2014 CSA C22.2#60950-1:2007 Ed.2+A1;A2 Information Technology Equipment - Safety, as an Over-voltage Class 0 device. Certification Pending. CENELEC-EN 55032 2012.01.30 Ed. 1.0
(CISPR 32) EMC of Multimedia Equipment -
Emission Requirements CENELEC-EN 55024 2010/08/24 Ed:2 (CISPR 24) IT Equipment- Immunity characteristics FCC 47CFR PT 15B, Unintentional Radiators IC ICES-003:2016Ed.6 12 98-1822 Rev AA Data Sheet Draft Landis+Gyr Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet FCC Compliance FCC Class A This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruc-
tions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Consult Landis+Gyr or an experienced radio technician for help Increase the separation between the equipment and receiver. U WARNING: Changes or modifications to this device not expressly approved by Landis+Gyr could void the users authority to operate the equipment. RF Exposure This equipment complies with FCC and ISED radiation exposure limits. This equipment should be installed and operated with a minimum distance of 30 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites FCC/ISED d'exposition aux radiations dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimale de 30cm entre le radia-teur et votre corps. Cet metteur ne doit pas tre co-implants ou exploits en conjonction avec une autre antenne ou metteur. Data Sheet 98-1822 Rev AA 13 Draft Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet Landis+Gyr EIRP Limit The equipment meets the required FCC specifications with any customer-selectable RF power setting of the radio, using the antennas indicated in this document. FCC testing was conducted using the antennas specified in this document. Antennas with higher gain may result in EIRP levels in excess of the FCC limit. Antennas of a type other than whip, dipole, and monopole are not FCC approved for this device. NOTE: If you increase the power from the factory settings, this can cause communication problems for other radios in the network. Requirement for Hosting Certified Radios The following radio modules are approved for use in the Bridge. NIC Cell Modems WiFi Transmitters that are added to the Bridge require testing to be approved. If the transmitters are added by the customer, the customer is responsible for this testing. If Landis+Gyr adds these modules, the testing will be performed, and they will be added to the list of approved modules. Industry Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the trans-
mitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (5294A-NG1R1S1) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Approved Antenna: Whip, 5.5 dBi gain, 902-928 MHz, 50 ohms. Approved Antenna: Dipole, 5.15 dBi gain, 902-928 MHZ, 50 ohms. Approved Antenna: Monopole 2.15 dBi gain, 902-928 MHz, 50 ohms. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) 14 98-1822 Rev AA Data Sheet Draft Landis+Gyr Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent metteur radio (5294A-NG1R1S1) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont stricte-
ment interdits pour l'exploitation de l'metteur. Brazil Anatel Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Regulatory Compliance India WPC Guidelines This device complies with WPC guidelines. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Safety Information California Hazard Identification U WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Data Sheet 98-1822 Rev AA 15 Draft