STRANGULATION HAZARD Children have STRANGLED in cords. Keep this cord out of reach of children (more than 3 feet/1 meter away from the crib). Never use extension cords with AC adapters. Only use the AC Adapters provided. WARNING Adult assembly required. Keep small parts away from children when assembling. Warning Information Keep this instruction manual for future reference. For adult use only. WARNING 3 Function of keys and LED indicators 4 Start to use monitor LB55932T/R INSTRUCTION MANUAL 1 Setup and use your digital video baby monitor Installing Baby Unit A. Place Baby Unit on a at surface, such as a desk or shelf or mount the camera on a wall. 1 meter Never place the baby unit or the cord within 1 meter of the crib. B. Connect the small plug of the power adapter to the Baby Unit and the other end to a suitable electrical outlet. Only use the enclosed adapter (5V DC 1000mA). The baby unit is turned on and the power LED will be blue. C. Connecting the power supply for the Parent Unit. Connect the small plug of the power adapter to the parent unit and the other end to a electrical outlet. Only use the enclosed adapter (5V DC/1000mA). Recommend charging time of at least 3 hours before rst use. Sound Level indicator Visual indicator for sound picked up from baby unit. The louder the sound is from Baby unit, the more LEDs are light on. Parent Unit Power Saving on off status Steady Green: Power saving mode is activated. Power on off status LED Steady Green: Parent Unit is powered on. Steady Orange: Charging battery. Flash Red: Battery Low Power Press and hold to switch On/O the unit. Microphone Power Saving-on/off mode Screen is switched o to save battery energy. When baby cry loud enough, screen is switched on to display babys video. Baby cry level is adjustable from Menu setting (Sensitivity Level L, M, H, AUTO). POWER VOX VOL-
VOL+
CAM TALK MENU MENU Press to open and exit menu options. Short cut to switch camera view Press this key to view camera 1, camera 2 and etc. paired camera. Antenna Lift up antenna to have better reception of audio and video. USB port Loudspeaker Kick Stand Flip out the kick stand and place the Parent Unit on a stable, level surface. Reset Battery Door Open the battery door to change battery. HW Reset Short press to turn o the parant unit, and need to restart. VOL- VOL+
Volume down/up Press to decrease and increase volume. Talk Press and hold to talk to baby unit. Power Saving-on/off Press to switch on/o Power Saving (voice activation mode). Zoom U S B C H A R G N G I TALK VOX OK CAM 2 Precaution: use of battery for Parent Unit Only charge the battery when the battery life indicator is low. Constant recharging of your battery before the low battery indicator light comes on will decrease the life of your batteries. When battery is low, the power on o LED (icon) will ash red and on screen display battery icon will ash red indicating that the battery needs to be charged. POWER VOX VOL-
VOL+
CAM TALK MENU Select Up/Down Left/Right Menu mode (Press to select menu option) Menu mode (Press to adjust menu settings) Menu mode (Press to adjust menu settings) Baby Unit Microphone Pairing button
:Camera Antenna Antenna Loudspeaker USB port Room Temperature sensor: Gather room temperature information. Notice:
If you use the parent unit for the first time, when you turn on the parent unit, some boot menus will pop-up on the screen, we try to explation status and function on these menus, please according to the tips to switch to the monitor system interface. When you are fimaliar with this monitor, you could switch off these on screen tips in menu. Pair Pairing button When camera is powered on, press and hold till power LED starting to blink. Status bar Talk function is activated Zoom in is activated Monitor is muted Temperature alert is activated Scan view is activated Signal strength reference 2 3 C Baby room temperature CAM1 Camera number Battery level o 23 C CAM1 Menu operation Adjust Parent Unit LCD Brightness lighter or darker. Adjust camera volume : Sound level from 1 to 5. ADD: Add additional camera. Step 1: Move the parent unit to the same area as the camera. Both parent and baby unit are switched on. Step 2: Select ADD in Menu. The next available camera will automatically be highlighted. Press Select to begin pairing. Step 3: Within 10 seconds, press Pairing button of camera. Step 4: Once successfully paired, the camera light will stop ashing and video will appear on the monitor screen within 20 seconds. Delete: Delete paired camera from the list. SCAN: Display paired camera one by one. View: Select and display the camera. In Out High: Beep Alarm is issued when room temperature is higher than this setting. Low: Beep Alarm is issued when room temperature is lower than this setting. C: Display temperature in Celsius scale. F
: Display temperature in Fahrenheit scale. Temperature calibration standardized one. ON: Activate room temperature alarm function. OFF : Deactivate room temperature alarm function.
: calibrate room temperature display to your Babys crying sound level To activate Parent unit from Power saving mode
: Baby cry louder to activate the Parent Unit.
: Learning environment sound and activation. Recommend for Activation sound level selection in power saving mode. Auto users having white noise machine, fans and lulllabies near by. Quiet: Baby cry a little bit to activate the Parent Unit. Medium: Baby cry moderate to activate the Parent Unit. Loud Audio on or o option in power saving mode: Keep audio continuously on or OFF when screen is o in power saving mode. Sound Bar
: This sound bar is disigned for deaf parents to reect sound level picked up from camera. You can turn visual sound level indication on or o. Explanation On/O : We try to explation status and function on the boot menu. You can turn the explanation on or o based on your usage. WARNING THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION When an AC Adapter is plugged into an electrical outlet, do not the exposed end. Test baby monitor before rst use, periodically, and when changing location of the baby unit(Camera). Do not use monitor near water (Such as bathtub, Sink, etc) Keep parent unit away from heat sources (Such as stoves, radiators, etc) Make sure there is proper ventilation around baby unit and parent unit. This product is not a toy. Do not allow children to play with it. The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. The baby monitor should not be considered as a medical device. While using the baby monitor, it is strongly recommended to have an adult directly checking on your baby. Premature babies or children considered at risk must be supervised by your pediatrician or other medical sta. Battery Warning Use only the original rechargeable battery provided. Do not shot-circuit supply terminals. Remove battery when product is stored for long periods of time or when batt ery is exhausted. Dispose of exhausted battery properly. Keep all batteries away from children. The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on the apparatus. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, re or the like. Precautions Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of re or electrics shock. The baby monitor works better in temperature ranging between 0 and 40 (32 and 104) Do not dismantle the appliance. It does not contain any parts that may be used independently. Never Expose the baby monitor for long period to suns direct rays and never place it next to a source of heat, in a damp or very dusty room. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a re or electric shock. Never spill liquid of any kind on the product. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualied service personnel. The product should be mounted to a wall or ceiling inly as recommended by the manufacturer. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution To assure continued compliance, any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example -
use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet quipement est conforme aux CNR-102 d'Industrie Canada. Cet quipement doit treinstall et utilis avec une distance minimale de 20 centimtres entre le radiateur et votrecorps. Cet metteur ne doit pas tre co-localises ou oprant en conjoncti on avec autreantenne ou metteur. Les antennes utilises pour cet metteur doivent tre installs etfournir une distance de sparation d'au moins 20 centimtre de toute personne et doit pas tre co-situe ni fonctionner en onjonction avec une autre antenne ou metteur. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
otions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. LBTechs baby monitor warranty policy LBTech will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the unit is defective in workmanship or materials. To claim your repair/replacement, the product must be returned to LBTech together with a copy of the purchase receipt. In the absence of the purchase receipt, the warranty will be 12 months from the date of manufacture. This warranty does not apply to normal wear or damage from misuse, abuse, improper storage and handling, installation, accident, unauthorized repair or alteration. Please contact our Customer service by Facebook LBTech or via email for details.