K3 Connect User Guide CL4510 CL5510 CL6510 Document Version:
0.2 Status:
Author:
DRAFT Martin Clayton Image for illustration only REGULATORY COMPLIANCE The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Download the App The K3 Connect App is available on Apple App Store and Google Play Store 1. Search the App Store (Apple iOS) or Play Store (Android) for the K3 Con-
nect App Install the App on your iOS or Android device After installation, open the App If asked, choose whether to allow notifications (unlocking notifications, 2. 3. 4. etc) 5. Touch Create Account... Register 1. Enter an account name, email address and choose a password. It is rec-
ommended to leave password and backup-to-cloud enabled. Note: You will need to enter a valid email address that you have access to. As part of the registration process, an email containing a validation 2. 3. code will be sent to that email address Touch Next to continue Check your email account for the validation email. Enter the validation code contained within the email and touch Next K3 Connect App Notifications Create Account Search the Apple App Choose whether to al-
Click the Create Ac-
or Google Play stores low notifications count button Page 1 Enter Details Validation Success!
Enter your details and Check your email for the The K3 Connect App is choose a password validation code ready for use Register a Lock 1. Open the K3 Connect App (if not already open) 2. 3. Touch the + button (top-right) of the screen Enter the lock DIN CL4510:
cl4510 CL5510:
cl5410 CL6510:
cl6510 4. Enter a name for the lock (we recommend that you choose a meaningful name) 5. 6. Touch the icon (top-right) of the screen Enter the following sequence into your lock:
Command:
#Master Code 00 1 Lock List Lock Details Lock DIN For new accounts, this Enter the lock DIN and Use the correct DIN for Example:
Note:
#12345678 00 1 If you have changed your Master Code, substitute the list will be empty choose a name your lock code used in the example above with your own code. 7. The lock will now pair with your phone 8. When complete, you may be prompted to set-up the WiFi Gateway touch Not Now. This step will be explained later in this guide Page 2 Pairing Synchronising Figure 6 Enter the pairing com-
The phone and lock will Line 2 mand into your lock now synchronise Line 3 Basic Functions From the lock list, you can unlock any lock within range1, synchronise, view lock info and view logs. 1. 2. In the lock list, swipe the lock left You will see Info, Logs and Sync options Info: View or change lock settings Logs: View audit entries (synchronise to retrieve latest logs) Sync: Synchronise the settings between the lock and App and retrieve latest logs 3. To unlock the lock, simply touch the lock in the lock list the lock icon will turn green to confirm unlocked status 4. If asked, choose whether to allow notifications (unlocking notifications, etc) 5. Click Create Account 1 Using the lock in conjunction with the WiFi gateway can effectively extend the range of operation. Lock List Actions Unlocking All locks paired under Primary actions availa-
Confirmation of unlock-
the current account ble for the lock ing command Page 3 Unlocked Lock status now shows green Synchronising Once you have made changes to the lock settings, added new Clients or need to see the latest audit information, you need to synchronise the App with your lock. 1. 2. 3. 4. In the lock list, swipe the lock left You will see Info, Logs and Sync options Info: View or change lock settings Logs: View audit entries (synchronise to retrieve latest logs) Sync: Synchronise the settings between the lock and App and retrieve latest logs Touch Sync Touch OK once the synchronisation is complete Note:
You will need to be within range of the lock. The effective range is up to 10m line-of-sight. Objects and walls will affect the effective range. Lock List In Progress Complete Select Sync to begin The synchronisation is in The synchronisation is synchronisation progress complete Page 4 Lock Settings & Parameters The lock settings can be opened by swiping left on the lock in the lock list and clicking on info (see page 3). 1. The lock settings will now be available. Information displayed will include the lock name, battery status and date/time information 2. 3. Touch Parameters The parameters screen provides access to all settings that apply to the lock as a whole including feature selection, day lock-out, code free and Master & Sub-Master Code changes 4. You can change any setting by touching the setting label or, where avail-
able, by sliding the switch to enabled (green) or disabled (grey) Lock Settings Parameters Parameters Help:
Remember to synchronise to apply the changes to the lock View & access lock in-
Modify the general lock Modify the general lock formation & settings settings settings Master & Sub-Master Codes 1. By default, you lock is preset with the Master Code of 12345678. It is rec-
ommended to change this default code to one of your own choice 2. Touch Change Master Code or Change Sub-Master Code to change the respective code Enter your new choice Touch the to confirm 3. 4. You can delete the Sub-Master Code by touching Delete Sub-Master Code on the parameters screen. Help:
Remember to synchronise to apply the changes to the lock Page 5 Master Code Sub-Master Code Delete Sub-Master Change the Master Change the Sub-Master Delete the Sub-Master Code Code Code Code-Free Code-Free allows you to set the lock to automatically unlock at pre-determined times. Up to 10 different Code-Free Modes can be activated. 1. 2. From the Parameters screen (see page 5), touch Code-Free Modes To set a Code-Free Mode, touch the relevant mode (0-9) and select the days of operation and the start & end times 3. You can activate and suspend all Code-Free Modes by touching the Ac-
tions button. Suspending all Code-Free Modes will revert the lock to nor-
mal operation (normally locked) Note:
A permitted Code-Free Mode will override a non-permitted Code-
Free Mode. Help:
Remember to synchronise to apply the changes to the lock Code-Free Mode Set Code-Free Mode Suspend/Activate View current Code-Free Up to 10 Code-Free Suspend or activate all status Modes can be set the Code-Free Modes Page 6 Day Lock-Out Lock out all clients on the specified days. 1. 2. 3. From the Parameters screen (see page 5), touch Day Lock-Out Select/de-select days for access by touching the relevant days Touch the to confirm (this will enable Day Lock-Out if not already ena-
bled 4. To disable Day Lock-Out, from the Parameters screen, swipe the switch adjacent to the Day Lock-Out pattern Note:
If a client has a an Active Period that conflicts with the Day Lock-
Out, the Active Period takes priority. Help:
Remember to synchronise to apply the changes to the lock General Settings The following settings can be updated via the Parameters screen. Touch a set-
ting to change:
Emergency Open Cancellation - when the REM 2 input has been trig-
gered, the lock will remain open for 30 minutes. This setting reverts the lock to normal operation Keypad Illumination - change if and how the keypad illuminates Re-Lock Delay - how long the lock will remain unlocked after a successful unlocking operation Help:
Remember to synchronise to apply the changes to the lock Page 7 Figure 1 Line 2 Figure 2 Line 2 Figure 4 Line 2 Figure 5 Line 2 Figure 6 Line 2 Line 3 NetCode NetCode allows you to create and share a 6 digit code that will give access to the lock for a specified period without needing a Bluetooth or WiFi1 connection to the lock. There are four modes available: Standard (Multiple Use), Standard (Single Use), URM (Long Term Rental) and ACC (Medium Term Rental) 1. 2. From the Parameters screen (see page 5), touch NetCode Mode Select the required mode 1 WiFi connection is via the WiFi Gateway. Help:
Remember to synchronise to apply the changes to the lock Delete a NetCode This feature enables you to block a NetCode:
1. 2. 3. Enter the NetCode you wish to block Confirm the NetCode Touch to confirm Help:
Remember to synchronise to apply the changes to the lock Page 8 Figure 1 Line 2 Figure 2 Line 2 Figure 4 Line 2 Clients A client is a Code, Card, Phone or NetCode that can be used to open the lock. 1. 2. 3. 4. 5. From any screen, touch the Clients icon at the bottom of the screen Initially, you will see an empty client list (figure 1) but as locks are added, this list will populate (figure 2) To add a client, touch the + button (top-right of the screen) Touch Type to select a type of client See the following pages for the different clients:
Phone Page 10 Card Page 11 Code Page 12 NetCode Page 13 Figure 1 Figure 2 Add Client Empty client list A single paired lock with Touch Type to choose a 3 clients client type Page 9 Choose Type Select a client type Phone Client A phone client is a client who had both the K3 Connect App and has registered for an account via the K3 Connect App. 1. 2. 3. 4. 5. 6. 7. 8. Follow the steps on page 9 Click the > (next) button (top-right of the screen) Touch the lock to add the client to Enter the email address of the client (must have the K3 App and a K3 ac-
count) Add any access periods Enter a message to include with the notification Touch Add to continue Select Type Choose Lock Details The client will receive a notification and be able to Accept or Reject the Select phone as the cli-
Select the lock to add Enter the client details key ent type the client to and click Add 9. On accepting the key, they will be able to unlock the lock with their phone Help:
Remember to synchronise to apply the changes to the lock Page 10 Success Notification Key Confirmation of request Notification on recipient Accept or reject the key phone on recipient phone Card Client A card client is a registered MIFARE based smartcard. Follow the steps on page 9 Click the > (next) button (top-right of the screen) Touch the lock to add the client to Add any access periods Touch Setup lock Touch Sync clients info Touch a smartcard to the lock - the lock will beep to confirm acceptance Touch OK to the onscreen success message 1. 2. 3. 4. 5. 6. 7. 8. Select Type Choose Lock Details Select card as the client Select the lock to add Set access periods and Note:
You will need to be within range of the lock. The effective range is type the client to touch Setup lock up to 10m line-of-sight. Objects and walls will affect the effective range. Page 11 Register Card Success Touch Sync clients info Smartcard now added and touch card to lock to lock Code Client A card client is a registered MIFARE based smartcard. Follow the steps on page 9 Click the > (next) button (top-right of the screen) Touch the lock to add the client to Add any access periods, enter a client name and choose a code Touch Add A reminder to synchronise with the lock will appeartouch OK to dismiss 1. 2. 3. 4. 5. 6. Help:
Remember to synchronise to apply the changes to the lock Select Type Choose Lock Details Select code as the cli-
Select the lock to add Enter details and click ent type the client to Add to continue Page 12 Sync Required You will need to sync to apply changes NetCode Client A NetCode client is code that only works from a specific date & time and for a set duration. NetCode clients do not appear in the client list. Follow the steps on page 9 Click the > (next) button (top-right of the screen) Touch the lock to add the client to Choose a start date and hour Choose a duration (either days or hours). For example, for a 1 hour NetCode, leave the Duration Day = 0 and set Duration Hour = 1 For type, select All Time (Multi-use) or One Time (Single-use) Touch Generate to create the NetCode Select Type Choose Lock Details The NetCode will be displayed - touch Close to dismiss the message or Select NetCode as the Select the lock to create Configure click Gener-
Share to send the NetCode via email, message, etc. client type the NetCode for ate to continue 1. 2. 3. 4. 5. 6. 7. 8. Page 13 NetCode Displayed Sharing Use Share to send the Send via Message or NetCode to others Email User Info You can change your password or configure cloud backup from the User Info screen. 1. From any screen, touch the Settings icon at the bottom of the screen 2. On the settings screen, touch User Info 3. 4. Touch Change Password to change your App password Backup can be enabled or disabled via the switch. You can perform an on-demand backup by touching Backup to Cloud Now Settings User Info K3 Connect App settings Change your password and perform backups Page 14 Title Text Figure 1 Line 2 Figure 2 Line 2 Figure 3 Line 2 Page Spare Figure 4 Line 2 Figure 5 Line 2 Figure 6 Line 2 Line 3 Document Version: 0.2 Status: Draft CLX500 Programming & Operating REGULATORY COMPLIANCE The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. Page 1 of 9 Document Version: 0.2 Status: Draft Operation The CLX500 family of locks support standalone and App augmented operation. When being operated independently of the App (i.e. standalone), some features are limited or not available. For the full feature set, please use the K3 App available from the Apple App Store or Google Play Store. Features Audit Trail Records button sequence, user/smartcard information, date/time and action. Total of 4000 entries recorded. Flexible User Codes Create User Codes with set active periods, one-time codes that are suspended after use. NetCode Remotely generate 6 digit timed codes. Smartcard Use MiFare compatible Smartcards for access. Switching Output Adaptor PCB to be provided to allow switching of 24v circuit (future product) Timed Code Free Access Program up to 10 different code free access profiles allowing the lock to automatically enter into code free mode. Transfer & Programming Settings to be transferred via BLE (from either phone or Gateway/Cloud). Restore to Factory Default Restore the lock to factory default (when the Master Code is unknown). 1. Remove battery 2. Press and hold 0 3. Replace battery 4. Release 0 5. Press 0 three times Settings Change the Master Code Changes the Master Code Note: The Master Code is 8 digits in length
#Master Code 01 New Master Code New Master Code
#12345678 01 87654321 87654321 Result: The Master Code has been updated to 87654321 Change the Sub-Master Code Changes the Sub-Master Code Page 2 of 9 Status: Draft Document Version: 0.2 Note: The Sub-Master Code is 8 digits in length
#Master Code 02 New Sub-Master Code New Sub-Master Code
#123456789 02 44556677 44556677 Result: The Sub-Master Code has been updated to 44556677 Delete the Sub-Master Code Deletes the Sub-Master Code
#Master Code 03
#12345678 03 Result: The Sub-Master Code has been deleted Enable & Configure Code-Free Mode Configures the lock to allow code free passage where no code, card or phone is needed to open the lock. Up to 10 Code-
Free times can be added. Each period can be set to work on one or more specific days. Note: Code-Free takes priority over any other setting except lock-down.
#Master Code 04 Code-Free period <0-9> Time Start <HHmm> Time End <HHmm> Week Pattern
#Master Code 04 0 0900 1630 1111100 Result: The lock will be in Code-Free from 09:00 to 16:30 on Monday to Friday Help: The week pattern uses a sequence of 7 numbers (MTWTFSS) that enable (1) or disable (0) Code-Free on a particular day. Suspend or Restore Code-Free Mode Suspends or restores Code-Free Mode for specific or all Code-Free Mode periods. Suspend specific Code-Free period:
#Master Code 05 1 Code-Free period <0-9>
#12345678 05 1 0 Result: Suspends Code-Free period 0 Restore specific Code-Free period:
#Master Code 05 2 Code-Free period <0-9>
#12345678 05 2 0 Suspend all Code-Free periods:
#Master Code 05 3
#12345678 05 3 Result: Suspends all Code-Free periods Restore all Code-Free periods:
#Master Code 05 4
#12345678 05 4 Result: Restores all Code-Free periods Change the Re-lock Delay Change the time (in seconds) for the lock to remain unlocked after successful unlocking (i.e. correct code, card or phone). The default re-lock delay is 5 seconds. Note: The delay range is from 2 seconds to 30 seconds.
#Master Code 06 Time <02-30>
#12345678 06 10 Result: The lock will remain open for 10 seconds after successful unlocking. Emergency Open Cancellation By closing the normally open REM 2 contact, the lock will open for 30 minutes. The Emergency Open Cancellation reverts the lock to normal operation after the REM 2 input has been triggered. Page 3 of 9 Status: Draft Document Version: 0.2
#Master Code 07
#12345678 07 Result: The lock reverts to normal operation. Change the Locked/Unlocked Status By changing the locked/unlocked status, you can enable a visual locked status indicator. Disable locked status indicator (default)
#Master Code 08 01
#12345678 08 01 Result: No locked status indicator Enabled locked status indicator
#Master Code 08 02
#12345678 08 02 Result: The red LED will flash every 5 seconds Note: Battery life will be reduced by enabling the locked status indicator Update the Date/Time Update the date and time on the lock. Particularly important when Code-Free and Active-Period options are in use.
#Master Code 10 YYMMDD HHmm
#12345678 10 160122 1422 Result: The date has been updated to January 22nd, 2016 and the time to 14:22. Set Daylight Savings Time Update the Daylight Savings Time (DST).
#Master Code 11 Date Starts <YYMMDD> Date Ends <YYMMDD>
#12345678 11 160327 161030 Result: DST is set to start on March 27th, 2016 and end on October 30th, 2016. In the majority of countries where DST operates, DST is applied at 01:00. This is the default DST time on the lock but can be changed by using the program below.
#Master Code 12 Time <HH>
#12345678 12 02 Result: DST will now be applied at 02:00. Feature Restriction The lock supports entry methods including code, card, phone and NetCode. By default, all methods are supported but can be disabled using the program below. Note: Access via a smartphone with the K3 Connect App is not supported in standalone applications.
#Master Code 13 User Code <0-1> Smart Card <0-1> NetCode <0-1>
#12345678 13 1 1 1 Result: Code, Card and NetCode methods are all enabled. Help: To enable a method, specify 1. To disabled a method, specify 0. Keypad Illumination An LED backlight can be enabled to illuminate the keypad. Illuminate by proximity will turn on the backlight when an object passes within close proximity of the keypad; illuminate by button press will turn on the backlight when a keypad is pressed. By default, keypad illumination is disabled. Disable Keypad Illumination
#Master Code 14 0
#12345678 14 0 Result: Keypad illumination is disabled. Page 4 of 9 Status: Draft Document Version: 0.2 Enable Keypad Illumination by Proximity
#Master Code 14 1 Start Hour <00-23> End Hour <00-23>
#12345678 14 1 08 17 Result: Keypad illumination by proximity is enabled. Note: Battery life will be reduced by enabling keypad illumination. Enable Keypad Illumination by Button Press
#Master Code 14 2 Start Hour <00-23> End Hour <00-23>
#12345678 14 2 08 17 Result: Keypad illumination by button press is enabled. Note: Battery life will be reduced by enabling keypad illumination. Disable all Access Methods (Lock-Down) Prevent the lock from being unlocked by any method except via Master Code Disable all Access Methods (Lock-Down)
#Master Code 15 1
#12345678 15 1 Result: Lock-down is enabled. Only the Master Code can be used to open the lock. Cancel Lock-Down
#Master Code 15 2
#12345678 15 2 Result: Lock-down is cancelled. Clients (Users) Add a New Client Four different types of client can be created when the lock is in standalone operation: standard code client, one-time code client (where the code will be blocked after a single use), card user (MIFARE based smartcards) and technician clients (only applicable when GuestCode is being used). Add an Code Client
#Master Code 20 1 Code
#12345678 20 1 3366 Result: The code 3366 can now be used to unlock the lock. Add a One-Time Code Client
#Master Code 20 2 Code
#12345678 20 2 7788 Result: The code 7788 can be used to unlock the lock once only after which time it will be blocked. Add a Smart Card Client Note: After entering the program below, the lock will wait for a MIFARE based smartcard to be placed over the keypad.
#Master Code 20 3
#12345678 20 3 Result: The Smartcard will be able to unlock the lock. Add a Technician Code Client Note: Only applicable when the GuestLock feature is enabled.
#Master Code 20 4 Technician Code
#12345678 20 4 4499 Result: The Technician Code 4499 is now enabled. Suspend and Restore Clients Any Code Client can be suspended and restored. Smart Card Clients cannot be suspended when the lock is in standalone operation. Suspend a Code Client
#Master Code 21 Code Page 5 of 9 Document Version: 0.2
#12345678 21 1199 Result: The Code 1199 has been suspended. Restore a Code Client
#Master Code 22 Code
#12345678 22 1199 Result: The Code 1199 has been restored. Status: Draft Help: All clients can be suspended and restored by using the lock-down programs. Deleting Clients Any Code Client can be deleted. When the lock is being used in standalone operation, Smart Card clients can only be deleted by deleting all clients. Delete a Single Code Client
#Master Code 25 Code
#12345678 25 1199 Result: The Code 1199 has been deleted. Delete All Clients
#Master Code 26
#12345678 26 Result: All Clients have been deleted. Active Periods In standalone operation, specific Active Periods can only be set for Code Clients. To use Active Periods for all Client types, you will need to use the K3 Connect App. Up to 10 Active Periods can be set for each Client. Set an Active Period for ALL Clients
#Master Code 27 **** Active Period <0-9> Start Time <HHmm> End Time <HHmm> Week Pattern
#12345678 27 **** 0 1330 1830 0101000 Result: All Clients will have access between 13:30 and 18:30 on Tuesdays and Thursdays only. Set an Active Period for a Specific Code Client
#Master Code 27 Code Active Period <0-9> Start Time <HHmm> End Time <HHmm> Week Pattern
#12345678 27 1199 0 0900 1700 1111100 Result: Client with Code 1199 has access between 09:00 and 17:00, Monday to Friday. Suspend (Disable) Specific Active Period
#Master Code 28 1 Code Active Period <0-9>
#12345678 28 1 1199 0 Result: Suspends the first Active Period for Client with Code 1199. Restore Specific Active Period
#Master Code 28 2 Code Active Period <0-9>
#12345678 28 2 1199 0 Result: Restores the first Active Period for Client with Code 1199. Suspend All Active Periods for Specific Code Client
#Master Code 28 3 Code
#12345678 28 3 1199 Result: Suspends all the Active Periods for Client with Code 1199. Restore All Active Periods for Specific Code Client
#Master Code 28 4 1199
#12345678 28 4 1199 Result: Restores all the Active Periods for Client with Code 1199. Suspend All Active Periods for All Clients Note: Includes Code and Smart Card clients.
#Master Code 28 5 Page 6 of 9 Document Version: 0.2
#12345678 28 5 Result: All Active Periods suspended. Restore All Active Periods for All Clients Note: Includes Code and Smart Card clients.
#Master Code 28 6
#12345678 28 6 Result: All Active Periods restored. Status: Draft Selected Day Lock-Out This program will lock out all Clients on the specified days. Please note that if a Client has a specific Active Period, that will take priority over the selected day lock-out program. Enable Selected Day Lock-Out Note: This program does not affect Master Codes, Sub-Master Codes or NetCodes. This program will affect Code Clients, Smartcard Clients and GuestCode Clients.
#Master Code 29 Week Pattern
#12345678 29 1111100 Result: Entry only permitted on Mondays to Fridays. Help: The week pattern uses a sequence of 7 numbers (MTWTFSS) that enable (1) or disable (0) Code-Free on a particular day. Disable Selected Day Lock-Out
#Master Code 29 0000000
#12345678 29 0000000 Result: Selected Day Lock-Out is disabled. NetCode NetCode provides a convenient way to provide date/time restricted Codes to people via the Codelocks Portal. Initialise NetCode Before NetCode can be used, the lock must be set-up first. The program below is provided for reference only. To initialise the lock correctly, follow the prompts on the Codelocks Portal.
#Master Code 50 YYMMDDHHmm Lock Identifer <100000,999999>
#12345678 50 1601221630 123456 Result: NetCode is initialised and the date/time is set to January 22nd, 2016 16:30. Note: Local/date time should be specified. Important: Please note that if NetCode is used in conjunction with other entry methods (e.g. standard Codes or Smart Cards), a NetCode must be prefixed with the * button. To enable or disable other entry methods, see Feature Restrictions. Block a Specific NetCode A specific NetCode can be manually blocked using the Master Code.
#Master Code 52 NetCode to Block
#Master Code 52 412682 Result: The NetCode 412682 is now blocked. GuestLock The GuestLock feature allows a guest to choose their own 4 digit Code (GuestCode) by prefixing their chosen GuestCode with that particular locks GuestCode prefix. The GuestLock feature must be enabled before use. Page 7 of 9 Status: Draft Document Version: 0.2 Enable GuestLock Enabling GuestLock sets the prefix for the specific lock.
#Master Code 60 748 748
#12345678 60 748 748 Result: The GuestLock feature is now enabled and the GuestCode prefix is set as 748. Clearing a GuestCode Before another guest can use the lock, the current GuestCode must be cleared.
#Master Code **
#123456789 **
Result: The GuestCode is cleared. Or
#Technician Code **
#123456789 **
Result: The GuestCode is cleared. Using the Lock with the K3 Connect App The K3 Connect App allows you to control the full features available on the K3 series locks and is available for download on the Apple App Store and Google Play Store. Download and Install the K3 Connect App Apple iPhone/iPad Visit the Apple App Store and search for K3 Connect. The Pair the Lock with a Smartphone By pairing the lock with a Smartphone, you will be able to manage the lock with the K3 Connect App (available from the Apple App Store or Google Play Store). The lock can only be paired with a single smartphone. By repeating the pairing process on another smartphone, you will cancel the original pairing. Note: This program should be run during the pairing process of the App. Running this program without the App will not pair your phone with the lock.
#Master Code 00 1
#12345678 00 1 Result: When run in conjunction with the pairing process within the App, the lock will now be paired with your smartphone. Firmware Update Process The K3 series of locks allow the firmware to be updated using the K3 Connect App. Warning: Ensure that both the lock and the smartphone are not displaying low battery notifications before continuing with the firmware update process. Update the Lock Firmware The K3 Series allows for the lock firmware to be updated using the K3 Connect App. You will require internet access on your smartphone for this process. Do not close the K3 Connect App during the upgrade process. Page 8 of 9 Document Version: 0.2 Status: Draft 1. Via the K3 App, open the Info screen of the lock to be updated 2. Select Firmware Version 3. The Firmware Upgrade page will open. To view the details about the upgrade, click Details. Select Download Firmware to start the download process 4. Once the Firmware has downloaded, an Upload Firmware to Lock button will display. Click this button to continue the process 5. On the lock, enter the pairing command:
#Master Code 00 1 6. The upload progress will display in the App 7. Once the firmware has uploaded to the lock, wait for the keypad to stop flashing red. Once you receive an Upgrade Successful message via the App and the keypad stops flashing red, the upgrade will be complete. During upload process, keypad will flash red. This process may take several minutes. You will receive a message in the App when the upload process has completed. The lock keypad will continue to flash red while the new firmware is applied. Once the keypad has stopped flashing, the process is complete. Page 9 of 9