all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
users manual | Users Manual | 1.81 MiB | ||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | users manual | Users Manual | 1.81 MiB |
Test Report No.: GETEC-E3-05-044 FCC Class B Certification APPENDIX H
: USERS MANUAL EUT Type: 23 LCD TV/Monitor FCC ID: BEJT23HLVA OWNER'S MANUAL TV/DVD Combination HIGH-DEFINITION TELEVISION DIGITAL VIDEO E: ENGLISH F: FRANAIS S: ESPAOL E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l 23HLV85 Owner's Record The model number and serial number are on the back of your TV/DVD. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV/DVD. Model number:
Serial number:
23HLV85 x i d n e p p A x e d n I
#01E01_23HLV85 1 05.5.30, 11:50 AM Black
(E) 23HLV85 Dear Customer, Thank you for purchasing this Toshiba LCD TV/DVD Combination. This manual will help you use the many exciting features of your new LCD TV/DVD Combination. Before operating the TV/DVD Combination, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. (See item 20 on page 4.) NOTE TO CATV INSTALLERS This is a reminder to call the CATV system installers attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 25 and 26 on page 4. FCC Declaration of Conformity Compliance Statement (Part 15):
The Toshiba 23HLV85 LCD Color Televisions comply with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. The party responsible for compliance to these rules is:
Toshiba America Consumer Products, L.L.C. 82 Totowa Rd. Wayne, NJ 07470. Ph: (973) 628-8000 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications to this equipment not expressly approved by Toshiba could void the users authority to operate this equipment.
#01E02-07_23HLV85 2 05.5.30, 11:50 AM Black
(E) 23HLV85 Introduction Welcome to Toshiba Thank you for purchasing this Toshiba LCD TV/DVD combination. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. The model and serial numbers are on the back of your TV. Write these numbers in the space provided on the front cover of this manual for your records. Instructions in this manual are based on using the remote control. You also can use the controls on the TV if they have the same name as those referred to on the remote control. Please read all the safety and operating instructions carefully, and keep this manual for future reference. Supplied accessories Check that you have the accessories and items shown. Owners Manual
(This book) Remote control Batteries R6 (AA) 2 Power cord Clip Connecting the power cord Back of TV Use this clip to attach the TV to a wall, pillar, or other immovable structure. See item 20 on page 4. NOTE: RISK OF EQUIPMENT DAMAGE!
Never plug in any power cords until you have finished connecting all equipment (see page 12). Wall outlet 100-240 V AC 60Hz E F S n n o o i i t t c c u u d d o o r r t t n n I I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l Power cord (supplied)
* The power cord supplied with this product is to be used in the United States and Canada only. x i d n e p p A x e d n I
#01E09-11_23HLV85 9 05.5.30, 11:50 AM Black
(E) 23HLV85 n o i t c u d o r t n I Exploring your new TV You can operate your TV by using the buttons on the top panel or the remote control. The A/V terminals for connecting other equipment to your TV are on the back panel and side panel (see illustrations below). Also see Connecting your TV on pages 12-18. Top panel VOLUME - +
TV/VIDEO STOP EJECT POWER CHANNEL PLAY SKIP Remote control Left side terminals TV front Headphone jack VIDEO-2 IN Back DVD disc slot Remote sensor Power indicator Terminal cover removed.
(see page 11) Power cord Cable clamper RGB/PC IN AUDIO OUT ANT IN HDMI IN PC AUDIO IN VIDEO-1 IN
(ColorStream) SPDIF IN
#01E09-11_23HLV85 10 05.5.30, 11:50 AM Black
(E) 23HLV85 Rear terminal cover The connection panel is hidden behind the terminal cover. 1. Remove the cover. Release the two hooks on the bottom of the cover. 2. Install cables as necessary. 3. Reinstall the cover. Align the holes on the TV back with the three tabs on the rear terminal cover as shown. 4. Close the cover. E F S n n o o i i t t c c u u d d o o r r t t n n I I g n i t c e n n o C V T r u o y Cable clamper The cable clamper can be used to bundle the connection cables
(see page 10). e h t g n i s U l o r t n o C e t o m e R WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE!
Never grasp the cable clamper when moving or lifting the TV. The cable clamper could break, causing the TV to fall. Cable clamper Adjusting the TV viewing angle You can adjust the angle of the TV screen. Swivel angle Tilt angle p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I
#01E09-11_23HLV85 11 05.5.30, 11:50 AM Black
(E) 23HLV85 Connecting your TV Note: All required cables, if not provided with your other devices, can be purchased at many electronics accessory suppliers. Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT 75 RF input on your TV. Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with standard audio and standard
(composite) video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. S-video cable is for use with video devices with S-video output. Separate audio cables are required for a complete connection. Note: An S-video cable provides better picture performance than a standard (composite) video cable. Component video cables come in sets of three and are for use with video devices with component video output. These cables are typically color-coded red, green, and blue. (ColorStream is Toshibas brand of component video.) Separate audio cables are required for a complete connection. Note: Component video cables provide better picture performance than a standard (composite) video or S-video cable. g n i t c e n n o C V T r u o y HDMI cable is for use with devices with uncompressed HDMI (high-
definition multimedia interface) video and compressed audio output. HDMI cable delivers digital audio and video in its native format (see page 16). This cable carries both video and audio information;
therefore, separate audio cables are not required for a complete connection. Note: HDMI cable provides better picture performance than a standard
(composite) video or S-video cable. Mini D-sub 15-pin cable is for use with a personal computer with an analog RGB (15-pin) output. A separate audio cable is required for a complete connection. Optical audio cable is for connecting receivers with Dolby Digital or PCM (pulse-code modulation) optical audio input to the TVs SPDIF
(digital audio out) terminal. See page 17. Connecting an antenna or cable TV This connection allows you to watch TV programs or basic cable channels. From Antenna or Cable Back of TV Coaxial (antenna) cable Standard A/V cables (red/white/yellow) S-video cable Component video cables HDMI cable Mini D-sub 15-pin cable Audio cable Optical audio cable NOTE: RISK OF EQUIPMENT DAMAGE!
Never plug in any power cords until you have finished connecting all equipment.
#01E12-18_23HLV85 12 05.5.30, 11:51 AM Black
(E) 23HLV85 Connecting a VCR This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel. From Cable Box or Antenna IN from ANT OUT to TV CH 3 CH 4 Back of TV Stereo VCR VIDEO AUDIO L R IN OUT Note:
If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of a standard video cable. The TV side panel can be used to connect a VCR with S-video. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y Connecting a cable converter box This connection allows you to watch basic and premium cable channels. Tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels. Back of TV Note:
When you use a converter box with your TV, the remote control will not operate some features, such as favorite channel programming or channel return. e h t g n i s U l o r t n o C e t o m e R From Cable IN OUT Cable box Connecting a cable converter box and a VCR This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. Set the TV signal source to Video1 (page 20). Tune the VCR to channel 3 or 4 (the same channel as the converter box output switch), and use the cable converter box to change channels. Stereo VCR IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN OUT From Cable IN OUT Cable box Back of TV Note:
When you use a converter box with your TV, the remote control will not operate some features, such as favorite channel programming or channel return. If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of a standard video cable. The TV side panel can be used to connect a VCR with S-video. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.
#01E12-18_23HLV85 13 05.5.30, 11:51 AM Black
(E) 23HLV85 p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I Connecting a DVD player with ColorStream
(component video) and a VCR This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. Your TV has ColorStream (component video) inputs. Connecting your TV to a DVD player with component video can greatly enhance picture quality and realism. To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch. To record a TV program while watching a DVD, tune the VCR to the channel to record, and select Video1 on the TV (see Selecting the video input source on page 24). From Antenna Stereo VCR IN from ANT OUT to TV VIDEO AUDIO L R CH 3 CH 4 Back of TV IN OUT TV side pannel g n i t c e n n o C V T r u o y Note:
For the highest possible picture quality, use component video cables between the TV and DVD player. The ColorStream jacks can be used with 480i and 480p scan system. The TV side panel can be used to connect a VCR with S-video. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Y PB PR S-VIDEO COMPONENT VIDEO VIDEO OUT AUDIO OUT L R L R DVD player with component video
#01E12-18_23HLV85 14 05.5.30, 11:51 AM Black
(E) 23HLV85 Connecting a DTV receiver/set-top box with ColorStream (component video) and a VCR This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV (composite video only) and TV programs. Your TV has ColorStream (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism. To record and watch a DTV program, select LINE IN on the VCR, and select Video1 on the TV (see Selecting the video input source on page 24). To record a TV program while watching a DTV program, tune the VCR to the channel to record, and select Video1 on the TV. To record and watch the same TV program, tune the VCR to the channel to record, and select Video2 on the TV. To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch. From Antenna Stereo VCR IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN OUT TV side pannel Back of TV From DTV Antenna Satelite IN Y PB PR S-VIDEO COMPONENT VIDEO VIDEO OUT DTV Receiver with component video AUDIO OUT L R L R Note:
For the highest possible picture quality, use component video cables between the TV and DTV receiver/set-top box. The TV side panel can be used to connect a VCR with S-video. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I
#01E12-18_23HLV85 15 05.5.30, 11:51 AM Black
(E) 23HLV85 Connecting an HDMI or a DVI device to the HDMI input The HDMI[1] input on your TV receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI[2]
device.
[1] HDMI = High-Definition Multimedia Interface.
[2] DVI = Digital Video Interface.
[3] HDCP = High-bandwidth Digital Content Protection.
[4] EIA/CEA-861/861B compliance covers the transmission of This input is designed to accept HDCP[3] program material in digital form from EIA/CEA-861/861B compliant[4] consumer electronic devices (such as a set-
top box or DVD player with HDMI or DVI output). The HDMI input is designed for best performance with 1080i high-definition video signals, but will also accept and display 480i, 480p, and 720p signals. g n i t c e n n o C V T r u o y To connect an HDMI device, you will need:
one HDMI cable (type A connector) For proper operation, it is recommended that you use a short HDMI cable. HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration below). Some CDVs (Video CDs) may not output digital audio signals, in which case you may be able to hear sound by connecting analog audio cables. However, if you connect analog audio cables with this connection, the HDMI terminal on the TV will not receive the HDMI digital audio signal and you will hear analog audio only. HDMI device VIDEO AUDIO L R IN OUT HDMI OUT uncompressed digital video with high-bandwidth digital content protection, the technology of which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:
When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV. To connect a DVI device, you will need:
one HDMItoDVI adapter cable
(HDMI type A connector) For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m). one pair of standard analog audio cables An HDMI-to-DVI adapter cable transfers only video. Separate analog audio cables are required (see illustration below). DVI device DVI OUT VIDEO AUDIO L R IN OUT TV lower back panel TV lower back panel HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
#01E12-18_23HLV85 16 05.5.30, 11:51 AM Black
(E) 23HLV85 E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R Connecting an audio system This connection allows you to hear the TV sound through external speakers connected to an audio amplifier. The audio signal level
(fixed) is not affected by pressing the volume buttons on the TV or the TVs remote control. To control the audio through the amplifier, use the audio systems remote control. Note:
Set the TVs volume to the minimum level if necessary. Amplifier LINE IN L R Back of TV Connecting a digital audio system During playback the DVD, the TVs SPDIF (digital audio out) terminal outputs a 2-channel down-mixed PCM (pulse-code modulation) signal for use with other external audio system with optical audio input. Dolby Digital decorder or other digital audio system LINE IN L R Optical Audio IN Back of TV Note:
Remove a cap from the SPDIF terminal before connecting an optical audio cable. Unless connecting an optical audio cable, be sure to attach a cap to prevent from such as dust. The SPDIF terminal may not output some digital audio sources because of copy restrictions. p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. Note:
If you have a camcorder with S-video, use an S-video cable instead of a standard video cable for better picture performance. k c a b y a P D V D l VIDEO AUDIO OUT L R Camcorder VIDEO 2 (side panel) x i d n e p p A x e d n I
#01E12-18_23HLV85 17 05.5.30, 11:51 AM Black
(E) 23HLV85 g n i t c e n n o C V T r u o y Connecting a personal computer (PC) This connection allows you to view the image of a personal computer
(PC) on the TV screen. When connecting a PC to the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The following signals can be displayed. XGA: 1360 768 @ 60Hz Other formats or non-standard signals may not be displayed correctly. To display the optimum picture, use the PC setting feature. (see Using the PC setting feature on page 35). Note:
Some PC models cannot be connected to this TV. An adapter is not needed for computers with a DOS/V compatible mini D-sub 15-pin terminal. Depending on the DVDs title and the specitications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes. Computer RGB/PC output Back of TV Audio output Audio cable Conversion adapter
(if necessary)
#01E12-18_23HLV85 18 05.5.30, 11:51 AM Black
(E) 23HLV85 Adjusting the picture Selecting the picture mode You can select your desired picture type from four picture modes:
Dynamic, Standard, Movie, or Memory. Mode Dynamic Standard Movie Memory Picture Quality Bright and dynamic picture (factory setting) Standard picture setting (factory setting) Movie-like picture setting (factory setting) Your personal preference To select the picture mode:
1. Press MENU, and then press x or until the Picture menu appears. 2. Press ENTER, and then press z or y to highlight Picture mode. 3. Press ENTER, and then press z or y to select the mode you prefer. Picture Picture mode Contrast Brightness Color Sharpness Tint Dynamic Standard Movie Memory EXIT MENU Adjusting the picture quality You can adjust the picture quality to your personal preferences, including the contrast, brightness, color, sharpness, and tint. Selection Contrast Brightness Color Sharpness Tint x lower darker paler softer reddish Pressing higher lighter deeper sharper greenish Note:
If you select one of the factory-set picture modes (Dynamic, Standard, or Movie) and then adjust a picture quality setting (for example, increase the contrast), the picture mode automatically changes to Memory in the Picture menu. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y l o r t n o C e t o m e R e h t g n i s U ENTER yzx MENU To adjust the picture quality:
1. Press MENU, and then press x or until the Picture menu appears. 2. Press ENTER, and then press y or z until the item you want to adjust is highlighted. Picture Picture mode Contrast Brightness Color Sharpness Tint 3. Press ENTER. 4. Press x or to adjust the level. Contrast 85 Note:
To continue adjusting the other items, press y or z in step 4. Contrast 85 ENTER EXIT MENU The Picture qualities you adjusted can be saved in the TVs Memory.
#01E29-31_23HLV85 29 05.5.30, 11:52 AM Black
(E) 23HLV85 p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I Using the closed caption feature The closed caption feature has two options:
CaptionsAn on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as CC in TV listings). TextAn on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations). To select captions or text:
1. Tune the TV to the desired program. 2. Press MENU, and then press x or to display the Special menu. 3. Press ENTER, and then press y or z to highlight Caption/Text. Language Caption/Text Captions Panel lock V-Chip Auto off Special CC1 Text1 CC2 Text2 CC3 Text3 CC4 Text4 EXIT MENU 4. Press ENTER, and then press y or z to select the Caption or Text mode you prefer. Language Caption/Text Captions Panel lock V-Chip Auto off Special CC1 Text1 CC2 Text2 CC3 Text3 CC4 Text4 EXIT MENU ENTER yzx MENU To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language in your area). Note: If the program or video you selected is not closed captioned, the captions will not display on the screen. s V T e h t g n i s U s e r u t a e F Note:
A closed caption signal may not display in the following situations:
When a videotape has been dubbed When the signal reception is weak When the signal reception is nonstandard Giant pandas eat leaves. To view text, select Text1, Text2, Text3, or Text4. Note: If text is not available in your area, a black rectangle may appear on your screen. If this happens, turn the Closed Caption feature Off. WORLD WEATHER Temps Current F C Weather LONDON 51 11 57 14 MOSCOW 53 12 PARIS 66 19 ROME 65 18 TOKYO Clear Cloudy Clear Cloudy Rain
#01E29-31_23HLV85 30 05.5.30, 11:52 AM Black
(E) 23HLV85 To turn on or off the Closed Caption feature 1. Press MENU, and then press x or to display the Special menu. 2. Press ENTER, and then press y or z to highlight Captions. 3. Press ENTER, and then press y or z to select On, Advanced mute or Off. Advanced mute activates the selected Caption or Text mode when the TV sound is muted. Language Caption/Text Captions Panel lock V-Chip Auto off Special On Advanced mute Off EXIT MENU The CLOSED CAPTION button on the remote control can also be used to select On, Advanced mute (see page 36), or Off. Using the Panel lock feature You can lock the control buttons on the TV to prevent your settings from being changed accidentally (by children, for example). When the Panel lock is On, no control buttons on the TV top panel will operate except POWER. To lock the top panel:
1. Press MENU, and then press x or to display the Special menu. 2. Press ENTER, and then press y or z to highlight Panel lock. 3. Press ENTER, and then press y or z to select On. Language Caption/Text Captions Panel lock V-Chip Auto off Special On Off EXIT MENU To unlock the top panel:
Select Off in step 3 above. Setting the sleep timer To set the sleep timer to turn off the TV automatically:
Repeatedly press SLEEP to set the length of time until the TV turns off. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y ENTER yzx MENU CLOSED CAPTION TV top panel Control buttons e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l SLEEP ENTER yzx MENU Sleep 30 Every time you press SLEEP, the time display will increase by 30 minutes, up to 120 minutes. 30 60 90 120 To cancel the sleep timer:
Press SLEEP until Sleep appears. Note :
When an instant power failure occurs, the sleep timer settings may be cleared. To display the amount of time left until the TV turns off automatically, press SLEEP once. x i d n e p p A x e d n I
#01E29-31_23HLV85 31 05.5.30, 11:52 AM Black
(E) 23HLV85 DISPLAY AUDIO SELECT MUTE Adjusting the sound Muting the sound Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display Mute in the lower left corner. When you select MUTE mode, the closed caption feature is automatically activated. To deactivate this feature, deactivate MUTE. This feature works only when the closed caption mode is set to Advanced mute. See Using the closed caption feature on page 30 for more information. Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to listen to high-fidelity stereo sound while watching TV. MTS can also transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations). When the TV receives a stereo or SAP broadcast, the word ST.SAP, Stereo or SAP appears on-screen every time the TV is turned on, the channel is changed, or DISPLAY is pressed. The MTS feature is not available when the TV is in Video mode. To listen to stereo sound:
Repeatedly press AUDIO SELECT to select Stereo. Stereo You can leave your TV in Stereo mode because it will automatically output the type of sound being broadcast (stereo or monaural). If the stereo sound is noisy, select Mono to reduce the noise. To listen to SAP (if available):
Press AUDIO SELECT repeatedly to select SAP. s V T e h t g n i s U s e r u t a e F SAP You will hear the stations second audio program (if available) from the speakers, while viewing the original programs picture.
#01E32-36_23HLV85 32 05.5.30, 11:52 AM Black
(E) 23HLV85 Using the WOW surround sound feature WOW surround widens and deepens audio listening field to deliver exceptional sound from the TV's speakers. The feature uses stereo signals from a TV broadcast or video input. To activate the WOW feature:
1. Select Stereo mode (see Selecting stereo/SAP broadcasts on page 32). 2. Press MENU, and then press x or until the Sound menu appears. 3. Press ENTER, and then press y or z to highlight Sound mode. 4. Press ENTER, and then press y or z to select WOW. Sound Sound mode Bass Treble Balance StableSound WOW Flat Hall Theater News Memory EXIT MENU Selecting the sound mode You can select your desired sound type from six sound modes:
WOW, Flat, Hall, Theater, News, or Memory. Press AUDIO SELECT repeatedly to select the appropriate sound mode as shown:
1. Press MENU, and then press x or until the Sound menu appears. 2. Press ENTER, and then press z or y to highlight Sound mode. 3. Press ENTER, and then press z or y to select the mode you prefer. Sound Sound mode Bass Treble Balance StableSound WOW Flat Hall Theater News Memory EXIT MENU Mode WOW Flat Hall Theater News Memory Sound Quality see above flat sound ( factory setting ) a concert hall filled with a rich warm sound
( factory setting ) a movie theater filled with a dynamic sound
( factory setting ) news/dialogue ( factory setting ) your personal preference WOW, SRS and WOW technology is incorporated under license from SRS Labs, Inc. symbol are trademarks of SRS Labs, Inc. Note:
If the broadcast is monaural, the WOW sound effect will not work. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y l o r t n o C e t o m e R e h t g n i s U ENTER yzx MENU Note:
If you select one of the factory-set audio modes ( WOW, Flat, Hall, Theater, or News ) and then change a sound quality setting ( for example, increase the bass ), the sound mode automatically change to Memory mode. p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I
#01E32-36_23HLV85 33 05.5.30, 11:52 AM Black
(E) 23HLV85 Adjusting the sound quality You can change the quality of your TVs sound by adjusting the bass, treble, and balance. To adjust the sound quality:
1. Press MENU, and then press x or until the Sound menu appears. 2. Press ENTER, and then press y or z to highlight the item you want to adjust. Sound Sound mode Bass Treble Balance StableSound Treble ENTER EXIT MENU 3. Press ENTER. 4. Press x or to adjust the level. Treble
+10 x makes the sound quality weaker or increases the balance in the left channel, depending on the item selected. makes the sound quality stronger or increases the balance in the right channel, depending on the item selected. Note:
To continue adjusting the other items, press y or z in step 4. s V T e h t g n i s U s e r u t a e F Using the StableSound feature When the signal source is changed, the StableSound feature limits the highest volume level to prevent extreme changes in volume (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial). To turn on the StableSound feature:
1. Press MENU, and then press x or until the Sound menu appears. 2. Press ENTER, and then press y or z to highlight StableSound. 3. Press ENTER, and then press y or z to select On. Sound Sound mode Bass Treble Balance StableSound On Off EXIT MENU To turn off the StableSound feature:
Select Off in step 3 above. ENTER yzx MENU
#01E32-36_23HLV85 34 05.5.30, 11:52 AM Black
(E) 23HLV85 TV top panel TV/VIDEO INPUT ENTER yzx MENU Using the PC setting feature You can adjust the horizontal/vertical picture position, clock (to minimize vertical stripes on the screen), and phase (to remove horizontal noise and sharpen the picture). You can auto-configure and reset these settings. 1. Confirm a PC is connected (see Connecting a personal computer (PC) on page 18). 2. Repeatedly press INPUT to select PC input mode. (See Selecting the video input source on page 24.) 3. Press MENU, and then press x or until the PC menu appears. 4. Press ENTER, and then press y or z to select an item. H-Position V-Position Clock Phase Auto configure Reset PC H-Position 76 ENTER EXIT MENU 5. Press Enter. 6. Press x or to make the appropriate adjustments. H-position/V-position Adjusts picture left/right and up/down. The adjustment range is 0100. (The adjustable range may vary depending on the input mode.) Clock Minimizes any vertical bars or stripes appearing on the screen background. The adjustment range is 0100. (The adjustable range may vary depending on the input mode.) Phase Reduces (or minimizes) any horizontal noise and clears up or sharpens the character images. The range adjustment is 0100.
(The adjustable range may vary depending on the input mode.) Auto configure Automatically adjusts the screen position, clock, and phase.
(The displayed image will disappear for a few seconds while auto-configuration is in progress.) Reset Returns to the default settings programmed at the factory. The values in the Reset function cannot be modified. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I
#01E32-36_23HLV85 35 05.5.30, 11:52 AM Black
(E) 23HLV85 DISPLAY CH INPUT ENTER yzx MENU GAME Using the Game Mode feature You can use the Game Mode feature for shorter frame delays when playing a video game requiring split-second timing between the on-
screen display and input from the controller (such as music creation and high-action games). To turn on Game Mode:
Press GAME. The TV will switch to the Game Mode when the on-
screen display closes. Note:
If you adjust the volume or make any other adjustments that cause a menu or on-screen control panel to display, the Game Mode will be temporarily suspended until the on-screen display closes. To turn off Game Mode:
You can change the video input in any of the following ways:
pressing GAME. pressing INPUT. changing the channel using the Number buttons or CH
. Using the Auto off feature When the Auto off feature is set to On, the TV/DVD will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature does not work when the Blue screen mode is set to Off. To activate the Auto off feature:
1. Press MENU, and then press x or until the Special menu appears. 2. Press ENTER, and then press y or z to highlight Auto off. 3. Press ENTER, and then press y or z to Select On. s V T e h t g n i s U s e r u t a e F Language Caption/Text Captions Panel lock V-Chip Auto off Special On Off EXIT MENU To deactivate the Auto off feature:
Select Off in step 3 above. Displaying on-screen information Press DISPLAY to display the following information on-screen:
Channel number or Video mode selected Stereo or SAP audio status TV 6 ST.SAP Understanding the last mode memory feature If the power is cut off while you are viewing the TV/DVD, the Last Mode Memory feature turns on the TV/DVD automatically when the power is resupplied. If the power is going to be off for a long time and you are going to be away from your TV/DVD, unplug the power cord to prevent the TV/
DVD from turning on in your absence.
#01E32-36_23HLV85 36 05.5.30, 11:52 AM Black
(E) 23HLV85 DVD Playback reduces or turns off the sound jumps the desired title (page 39) ejects the DVD loaded in the disc slot (page 38) Learning about the remote control The buttons used for operating the DVD only are described here. POWER turns the TV on and off. TV/DVD switches to the DVD mode EJECT Number buttons (0-9, 100) enters the numbers directly JUMP AUDIO SELECT changes the audio-related setting (page 39) MUTE VOL (volume) + - adjusts the volume level DVD MENU accesses disc menus (page 39) SUBTITLE selects the subtitle language or turns the subtitle off (page 40) ZOOM enlarges or reduces the picture size (page 39) PLAY MODE changes repeat mode (page 39) ENTER activates the function settings in the menu (page 39) yzx (arrow buttons) select or adjust menu items MENU/SETUP opens the menu system (page 40) EXIT/CANCEL closes the menu system PAUSE pauses the picture. To restart, press again (page 38) begins playback of a DVD (page 38) stops playback of a DVD (page 38) rewinds the DVD. (Press during play mode to view the picture moving rapidly backward.) (page 38) fast-forwards the DVD. (Press during play mode to view the picture moving rapidly forward.) (page 38) skips back to beginning of current DVD chapter or locates previous chapters (page 38) PLAY STOP REV FF SKIP SKIP skips forward to locate later DVD chapters (page 38) plays forward or reverse in slow-motion (page 38) SLOW ANGLE changes the angle when playing back a DVD recorded with multi-angle facility (page 39) MARKER accesses the bookmaker settings (page 39) TOP MENU accesses a title menu (page 39) RETURN returns to the previous MP3 file you were listening REPEAT A-B allows you to repeat material between two selected points
(page 39)
#01E37-44_23HLV85 37 05.5.30, 11:53 AM Black
(E) 23HLV85 E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I DVD & VCD Operation Basic Playback 1. Press POWER. 2. Slide your chosen disc into the disc slot on the side panel. Be sure to face the top of the disc (with title etc.) toward the front of the screen. Playback starts. 3. Press EJECT to remove the disc. Stop Playback 1. Press STOP to stop playback. At this time, DVD video player stops playback temporarily and maintains the current playback position. If PLAY is pressed, playback will resume from the location where you stopped playback. 2. Press STOP again to stop playback fully. (At
, disc playback this time, if you press PLAY start from the beginning.) Pause Playback (Still mode) 1. Press PAUSE 2. Press PLAY during playback. again to return to normal playback. Note:
Press PLAY to return to DVD mode from the TV, Video or PC mode. If you have a disc problem during playback, remove the disc by pressing and holding down EJECT on the top panel for more than 4 seconds. Fast Forward/Backward 1. Press FF or REV during playback. FF or REV Each time you press FF playback speed changes as shown. 4 32 4 32 2 16 2 16 REV
, the 8 1. 8 1. 2. Press PLAY to resume normal playback. k c a b y a P D V D l Slow Forward/Backward or SLOW 1. Press SLOW Each time you press SLOW playback speed changes as shown:
1/4 SLOW
during playback. or SLOW
, the 1/8 VCD 1x. 1/2 1/16 1/2 1/16 SLOW 2. Press PLAY
1/4 1/8 1x. (DVD only) to resume normal playback. Note:
There is no sound during fast or slow playback for DVDs or Video CDs. Skip a Chapter or a Track 1. Press SKIP or SKIP chapter during playback. Each time you press the button, a chapter or track is skipped. to locate a desired Press SKIP or tracks. to locate succeeding chapters Press SKIP twice in quick succession, playback will start from the beginning of the next chapter or track. Press SKIP to go back to the beginning of the current chapter or track. Press SKIP twice in quick succession, playback will start from the beginning of the previous chapter or track. Frame by Frame Playback 1. Press SKIP or SKIP in the still mode, one frame is displayed at a time. This function maybe operate differently depending on the disc type.
(The backward frame function doesnt work in VCD disc.) On-Screen Display You can display the playback status on TV screen as follows: Title, Chapter number, Playing time. 1. Press DISPLAY during DVD playback. Title, Chapter information appears on screen. Each time you press DISPLAY, the OSD changes as follows. DVD: Title Elapsed Chapter Elapsed Display off Title Remain Chapter Remain VCD: Single Elapsed Single Remain Total Elapsed Display off Total Remain DVD Title Elapsed TT 0 1 / 0 3 CH 0 1 / 0 2 0:02:00 Title Number Playing Time Chapter Number Single Elapsed Track 0 2 / 0 2 01:58 Track Number Playing Time Note:
OSD display may different depending on the type of DVD disc.
#01E37-44_23HLV85 38 05.5.30, 11:53 AM Black
(E) 23HLV85 Selecting disc menu 1. Press DVD MENU during playback. 2. Use yzx , or ENTER to select the desired menu option. Selecting title menu 1. Press TOP MENU during playback. 2. Use yzx , or ENTER to select the desired item. Note :
The unit may not be able to select the disc or title menu depending on the type of DVD disc. Repeat playback You can play a specific title, chapter, track, or segment repeatedly. 1. Press PLAY MODE during playback. DVD :
Each time you press PLAY MODE, the repeat mode changes as follows. Chapter ALL Track Repeat Off Repeat Off ALL VCD :
Title A-B repeat playback A-B repeat playback allows you to repeat material between two selected points. 1. Press REPEAT A-B to select the start point during playback. A is displayed on TV screen and the starting point of your selected segment is set up. 2. Press REPEAT A-B again to select the end point. AB is displayed on TV screen and the ending point is set up. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again. Selecting camera angles If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are currently watching. 1. Press ANGLE during playback. 2. Repeatedly press ANGLE to select the desired angle. Note:
You can only change the angle for DVDs that provide multiple angles of scenes. The angle function will not work on DVD video discs that do not contain scenes recorded at different angles. The number of angles varies from disc to disc. Picture Size Zoom When enlarging or reducing the picture, it may become distorted. 1. Press ZOOM during playback. 2. Each press of ZOOM changes the screen display as indicated below:
2, 3, 4, 1/2, 1/3, 1/4, (Zoom off ) 3. Adjust the main picture position using yzx while in the enlarged picture mode. JUMP 1. Press JUMP in the stop mode. 2. Use the number buttons to enter desired title. Playback will start from the beginning of the desired title. Title 0 - /03 Chapter 00/00 Chapter Number Time AUDIO SELECT 1. Press AUDIO SELECT to change the audio-
related setting during DVD playback. Each time you press it, the set value is changed. Audio 1 / 3 : D 2 CH English Note :
Depending on the disc, Audio setup may not be possible. MARKER 1. Press MARKER during playback. The Bookmark picture appears as the DVD is playing. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F 3. Press yzx , select a marker, and then press PLAY
. Playback starts from the desired scene. About DVD Screen Saver If you pause or stop a picture of a DVD video disc and leave it still for approximately 2 minutes, the screen saver of the player automatically appears. To turn off the screen saver, press any button related DVD on the remote control. x i d n e p p A x e d n I 3. Repeatedly press REPEAT A-B again to resume normal playback. Off appears on the screen. 2. Press PLAY place a mark. at any scenes where you want to k c a b y a P D V D l
#01E37-44_23HLV85 39 05.5.30, 11:53 AM Black
(E) 23HLV85 DVD Menu options If you press SETUP in the stop mode, the DVD menu is displayed, and in the play or pause mode, the TV setup menu is displayed. Selecting an audio language Select your preferred audio language. If an audio language is selected, the selected audio language is played whenever you start a new disc playback. (The disc must contain the selected language) 1. Press SETUP in the stop mode, and then press y or z to select Audio Language. 2. Press , and then press y or z to select your desired language. Audio Language Subtitle Language Menu Language Rating Level New Password TV Screen OSD Language Digital Output Special
: Move : Next Original Korean English French German Spanish Italian Chinese Polish Japanese 3. Press ENTER. 4. Press SETUP to resume normal playback. Selecting a subtitle language Select your preferred subtitle language. If a subtitle language is selected, the selected subtitle language is played whenever you start a new disc playback. (The disc must contain the selected language) You can also select another available subtitle language during playback with SUBTITLE on the remote control during playback. 1. Press SETUP in the stop mode, and then press y or z to select Subtitle Language. 2. Press , and then press y or z to select your desired language. Audio Language Subtitle Language Subtitle Language Menu Language Rating Level New Password TV Screen OSD Language Digital Output Special
: Move : Next Original Korean English French German Spanish Italian Chinese Polish Japanese Off 3. Press ENTER. 4. Press SETUP to resume normal playback. Disc menu language selection Select your preferred language for the disc menus and DVD messages. (The disc must contain the selected language) 1. Press SETUP in the stop mode, and then press y or z to select Menu Language. 2. Press , and then press y or z to select your desired language. Audio Language Subtitle Language Menu Language Rating Level New Password TV Screen OSD Language Digital Output Special
: Move : Next Original Korean English French German Spanish Italian Chinese Polish Japanese 3. Press ENTER. The menus and on screen displays will appear in the selected language. 4. Press SETUP to resume normal playback. Parental Control Setup Use to block viewing of unsuitable discs. 1. Press SETUP in the stop mode, and then press y or z to select Rating Level. 2. Press and then use number buttons to key in a 4-digit password. Be sure to remember the password!
Audio Language Subtitle Language Menu Language Rating Level New Password TV Screen OSD Language Digital Output Special
: Move : Next 8 Adult 7 NC - 17 6 R 5 PG -r 4 PG - 13 3 PG 2 G 1 Kids 0 Unlock 3. Press y or z to set the restriction level from 0 to 8. Viewing becomes more restricted as the number decreases. 0: Unlock 1: Kids 2: G (General audience) 3: PG (Parental guidance suggested) 4: PG-13 (13 years and older) 5: PG-r 6: R (Restricted) 7: NC-17 (18 years and older) 8: Adult (Adults only) 4. Press SETUP to resume normal playback. Note:
If you ever forget your password, key in 7, 7, 7, 7 on the remote control. k c a b y a P D V D l
#01E37-44_23HLV85 40 05.5.30, 11:53 AM Black
(E) 23HLV85 Digital audio output You can select the output for SPDIF (Sony/Philips Digital Interface). 1. Press SETUP in the stop mode, and then press y or z to select Digital Output. 2. Press , and then press y or z to select OFF, RAW (Original SPDIF signal), or PCM (Pulse Code Modulation: Encodes SPDIF signal to PCM). Audio Language Subtitle Language Menu Language Rating Level New Password TV Screen OSD Language Digital Output Special
: Move : Next OFF RAW PCM 3. Press ENTER. 4. Press SETUP to resume normal playback. DRC (Dynamic Range Compression) Confines the audio range to prevent excessively loud sound yet allows you to hear the low sounds clearly. 1. Press SETUP in the stop mode, and then press y or z to select Special. 2. Press , and then press y or z to select DRC Off
(Decrease the DRC range) or DRC On (Reset the DRC range to original values). Audio Language Subtitle Language Menu Language Rating Level New Password TV Screen OSD Language Digital Output Special
: Move : Next DRC Off DRC On 3. Press ENTER. 4. Press SETUP to resume normal playback. Changing the password 1. Press SETUP in the stop mode, and then press y or z to select Rating Level. 2. Press , and then use number buttons to key in a 4-digit password. Audio Language Subtitle Language Menu Language Rating Level New Password TV Screen OSD Language Digital Output Special
: Move : Next
3. Press x, and then press y or z to select New Password. 4. Press , and then enter a 4 digit password. Enter it again when requested. 5. Press SETUP to resume normal playback. TV Screen You can watch TV in various picture formats. 1. Press SETUP in the stop mode, and then press y or z to select TV Screen. 2. Press , and then press y or z to select 4 : 3 LB, 4 : 3 PS, or 16 : 9 Wide. Audio Language Subtitle Language Menu Language Rating Level New Password TV Screen OSD Language Digital Output Special
: Move : Next 4 : 3 LB 4 : 3 PS 16 : 9 Wide 3. Press ENTER. 4. Press SETUP to resume normal playback. Note :
Depending on the disc, the TV screen feature may not be available. Disc OSD language selection The on-screen display can be shown on the screen in your specified language. 1. Press SETUP in the stop mode, and then press y or z to select OSD Language. 2. Press , and then press y or z to select your desired language. All the on screen displays will appear in the selected language. 3. Press SETUP to resume normal playback.
#01E37-44_23HLV85 41 05.5.30, 11:53 AM Black
(E) 23HLV85 E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I MP3/WMA files Playback options MP3/WMA Files Playback 1. When inserted, the MP3 menu screen appears automatically depending on the MP3 discs folder
(directory) structure as shown to the below. 2. Press y or z to find desired folder and then press ENTER. 3. Press y or z to find the desired MP3 title and then press ENTER. Stop/Pause Playback Stop Playback Press STOP to stop playback. Pause Playback 1. Press PAUSE 2. Press PLAY playback. during playback. again to return to normal Playable files MP3/WMA disc compatibility with this player is limited as follows:
Playable discs: CD-ROM, CD-R, CD-RW Sampling Frequency: 32 kHz, 44,1 kHz, 48 kHz Bit rate: WMA: 48 kbps - 192 kbps(CBR) MP3: 32 kbps - 320 kbps (CBR) CD physical format: Mode 1 File system: ISO9660, UDF without interleave File name: File names are limited to eight characters or less and must incorporate MP3 or WMA extension. e.g.********.MP3, ********.WMA File names cannot contain special characters such as ?!><+*}{`[@]:;\ /., etc. File size: Less than 50 bytes Total number of files: Less than 650 WMA codec version: V2, V7, V8, V9 (Stereo sound only) Repeat playback You can play a specific track repeatedly. 1. Press PLAY MODE during playback. Each time you press PLAY MODE, the repeat mode changes in the following order: Track Repeat Track Off Repeat Directory A-B repeat playback A-B repeat playback allows you to repeat material between two selected points. 1. Press REPEAT A-B to select the start point during playback. A is displayed on TV screen and the starting point of your selected segment is set up. 2. Press REPEAT A-B again to select the end point. AB is displayed on TV screen and the ending point is set up. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again. 3. Repeatedly press REPEAT A-B until Off appears on the screen to resume normal playback. k c a b y a P D V D l
#01E37-44_23HLV85 42 05.5.30, 11:53 AM Black
(E) 23HLV85 Audio CD Playback options On-Screen Display You can display the Track, and Playback time status on the TV screen. 1. Press DISPLAY during CD playback. Track information appear on screen. Each time you press DISPLAY, the OSD changes as follows:
Single Elapsed Elapsed Single Remain Total Remain Total Single Elapsed Track 0 1 / 2 1 01:00 Track Number Playing Time Stop Playback 1. Press STOP to stop playback. At this time the DVD video player stops playback temporarily and maintains the current playback position. If PLAY from the location where you stopped playback. is pressed, playback will resume 2. Press STOP again to stop playback fully. (At this time if you press PLAY starts from the beginning.)
, disc playback Pause Playback (Still mode) 1. Press PAUSE 2. Press PLAY during playback. again to return to normal playback. Fast Forward/Backward 1. Press FF or REV during playback. Each time you press FF playback speed changes as shown. or REV
, the FWD
REV 2. Press PLAY 2 2 16 16 4 4 32. 32. to resume normal playback. Repeat playback You can play a specific track repeatedly. 1. Press PLAY MODE during playback. Each time you press PLAY MODE, the repeat mode changes as indicated:
Track Repeat Off ALL E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l Skip Tracks 1. Press SKIP or SKIP to locate a desired track during playback. Each time you press the button, the unit skips to the next/previous track. A-B repeat playback A-B repeat playback allows you to repeat material between two selected points. 1. Press REPEAT A-B to select the start point during playback. A is displayed on TV screen and the starting point of your selected segment is set up. 2. Press REPEAT A-B again to select the end point. AB is displayed on TV screen and the ending point is set up. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again. 3. Repeatedly press REPEAT A-B again to resume normal playback. Off appears on the screen. JPEG file viewing options As a JPEG file is loaded, the table of contents appears on the TV screen. 16 slide show transition modes are available. Picture Selection 1. Press y or z to select the desired picture. The selected JPEG file appears on the right side of the screen. 2. Press ENTER to enlarge the JPEG file to fill the screen. 8 8 again to start slide show mode. to return to the menu. 3. Press PLAY Press STOP Note:
If you press ENTER while playing a JEPG disc, the picture slide show starts. Picture transition modes 1. Press y or z to select the desired picture, and then press PLAY to start the slide show. 2. Press EXIT/CANCEL to stop the slide show. Image Rotation Press y or z to rotate a picture. There are 2 modes to rotate picture:
y : invert. z : mirror x i d n e p p A x e d n I
#01E37-44_23HLV85 43 05.5.30, 11:53 AM Black
(E) 23HLV85 Image Zoom 1. Press ZOOM and use FF the zoom mode at 50% ~ 200%. or REV to see 2. Adjust the picture position using yzx while in the enlarged picture mode. To exit Zoom mode, press ZOOM one more time. 3. Press STOP to return to the menu. Repeat playback You can show JPEG files repeatedly. 1. Press PLAY MODE during playback. Each time you press PLAY MODE, the repeat mode changes as indicated:
Repeat One Repeat All Repeat Off JPEG files compatibility Discs and pixels whose compatibility with this player has been confirmed by TOSHIBA are as follows. Kodak Picture CD JPEG disc compatibility with this player is limited as follows:
Playable discs: CD-ROM, CD-R, CD-RW File system: ISO9660, UDF without interleave File name: File names are limited to eight characters or less and must incorporate JPG extension. e.g.********.JPG File names cannot contain special characters such as ?!><+*}{`[@]:;\ /., etc. File size: Less than 10M bytes File format: BASELINE, PROGRESSIVE Resolution: Baseline JPG: 3072 2048 Progressive JPG:
width*(height + 128) < 3300000 Files with size < 20M bytes. k c a b y a P D V D l
#01E37-44_23HLV85 44 05.5.30, 11:53 AM Black
(E) 23HLV85 Appendix Specifications This model complies with the specifications listed below. Designs and specifications are subject to change without notice. WARNING: RISK OF ELECTRIC SHOCK !
Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center. Television System NTSC standard Channel Coverage VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W) Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 125) Power Source 100-240 V AC, 60 Hz Power Consumption XX W 0.8 W in standby mode Audio Power 5 W + 5 W Video/Audio Terminals S-VIDEO INPUT Y : 1 V(p-p), 75 ohms, negative sync. C : 0.286 V(p-p) (burst signal), 75 ohms VIDEO/AUDIO INPUT VIDEO: 1 V(p-p), 75 ohms, negative sync. AUDIO: 400 mV(rms) (30% modulation equivalent, 22k ohms or greater) ColorStream (Component video) INPUT Y : 1V(p-p), 75 ohms PR: 0.7 V(p-p), 75 ohms PB: 0.7 V(p-p), 75 ohms AUDIO: 400 mV(rms), 22k ohms or greater Suggested resolutions: 1080:, 480p, 480i, 720p AUDIO OUTPUT 400 mV(rms) (30% modulation equivalent, 2.2k ohms or less) HEADPHONE jack 3.5 mm stereo mini jack PC INPUT 15-pin D-sub Analog RGB PC AUDIO INPUT 3.5 mm stereo mini jack HDMI INPUT:
HDMI compliant (type A connector) HDCP compliant E-EDID** compliant Suggested scan rates: 1080i, 480p, 480i, 720p HDMI Audio:
2-channel PCM;
32/44.1/48 kHz sampling frequency;
16/20/24 bits per sample Note: This TV does not provide HDMI OUTPUT. SPDIF (digital audio output):
Optical type Dimensions (Including TV stand) Width : XX inches (XXX mm) Height : XX-X/X inches (XXX mm) Depth : X inches (XXX mm) Mass (weight) XX.X lbs (X.X kg) Operating conditions Temperature: 32F 95F (0C 35C) Humidity: 20 80% (no moisture condensation) DVD/CD Player Signal system Applicable disc Pickup NTSC 1. DVD (12cm, 8cm [with Disc adapter]) 2. CD (12cm, 8cm [with Disc adapter]) 1-Lens, 2-Beams system E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I
#01E45-49_23HLV85 45 05.5.30, 11:53 AM Black
(E) 23HLV85 Troubleshooting Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions. Symptom TV will not turn on No picture, no sound No sound, picture OK Poor picture, sound OK Poor reception of broadcast channels Black box appears on the screen Unable to select a certain channel Multiple images Poor color or no color Solution POWER. the batteries. Make sure the power cord is plugged in, then press The remote control batteries may be dead. Replace Check the antenna/cable connections. The sound may be muted. Press VOL + . The station may have broadcast difficulties. Try another channel. Make sure the MTS feature is set properly. Check the antenna connections. The station may have broadcast difficulties. Try another channel. Adjust the Picture menu. The station may have broadcast difficulties. Try another channel. Check the antenna connections. The closed caption feature may be set to one of the Text modes (Text1, Text2, Text3, or Text4). Turn closed captioning Off. The channel may be erased with the Manual programming feature. The station may have broadcast difficulties. Try another channel. Antenna reception may be poor. Use a highly directional outdoor antenna. The station may have broadcast difficulties. Try another channel. Adjust the Tint and/or Color in the Picture menu. No stereo or SAP sound from a known MTS broadcast Make sure the MTS feature is set properly. The top panel buttons do not operate Check the Panel lock feature. The remote control does not operate x i d n e p p A Remove all obstructions between the remote control and the remote control sensor in the TV. The remote control batteries may be dead. Replace the batteries.
#01E45-49_23HLV85 46 05.5.30, 11:53 AM Black
(E) 23HLV85 Symptom (DVD) Playback doesnt start No picture No sound Solution No disc is loaded. The disc may be dirty. Clean the disc. The TV cannot play CD-ROMs, etc. TV selector is not set correctly. Make sure the input selector of the amplifier is set The TV is in the special playback mode. Select the correct Audio Output/Input position on properly. AV Amplifier. Picture is distorted during fast reverse/forward playback The picture will be distorted occasionally. Stopping playback, search, slow-motion play, A-B repeat play, or changing angles, etc. cannot be performed Some discs may not perform certain functions. No on-screen display No surround sound The TV or remote operation key is not functioning Select Display On. The setup does not match your stereo system. Turn off the TV and unplug the AC power cord for several is not functioning minutes, then replug it. Playback does not start when the title is selected Check the RATING LEVEL setup. Audio soundtrack and/or subtitle language is not changed when you play back a DVD Multilingual language is not recorded on the DVD disc. No subtitle Angle cannot be changed appears on the screen Some discs have no subtitles. Subtitles are cleared. Press SUBTITLE. Multi-angles are not recorded on the DVD discs. The function is prohibited with the TV or the disc. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F k c a b y a P D V D l x i d n e p p A x e d n I
#01E45-49_23HLV85 47 05.5.30, 11:53 AM Black
(E) 23HLV85 HEAD OFFICE:82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470, U.S.A. NATIONAL SERVICE DIVISION:1420B TOSHIBA DRIVE, LEBANON, TN. 37087, U.S.A. HEAD OFFICE/191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400 SERVICE CENTERS:
TORONTO: 191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400 MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J-4A1, CANADA TEL:(514)390-7766 VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C. V6W 1J5, CANADA TEL: (604) 303-2500 ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products, L.L.C.
#01E52_23HLV85 52 05.5.30, 11:54 AM Black
(E) 23HLV85 YC/L 72742113
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-06-15 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-06-15
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0023476120
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
T23HLVA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K****** H****
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 23" LCD TV/ Monitor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Gumi University EMC Center
|
||||
1 | Name |
T****** P****
|
||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
t******@kumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC