all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Revised Users Manual | Users Manual | 3.18 MiB | ||||
1 2 |
|
Users Manual | Users Manual | 3.18 MiB | May 06 2009 | |||
1 2 |
|
Users Manual 1 | Users Manual | 3.16 MiB | ||||
1 2 |
|
Users Manual 2 | Users Manual | 3.75 MiB | ||||
1 2 | Cover Letter(s) | May 06 2009 | ||||||
1 2 | External Photos | May 06 2009 | ||||||
1 2 | ID Label/Location Info | May 06 2009 | ||||||
1 2 | Internal Photos | May 06 2009 | ||||||
1 2 | Test Report | May 06 2009 | ||||||
1 2 | Test Setup Photos | May 06 2009 | ||||||
1 2 | RF Exposure Info | May 06 2009 | ||||||
1 2 | Attestation Statements | / May 06 2009 | ||||||
1 2 | Test Setup Photos | April 06 2009 | ||||||
1 2 | Cover Letter(s) | / May 06 2009 | ||||||
1 2 | RF Exposure Info | / May 06 2009 | ||||||
1 2 | RF Exposure Info | / May 06 2009 | ||||||
1 2 | Cover Letter(s) | / May 06 2009 | ||||||
1 2 | Test Setup Photos | |||||||
1 2 | RF Exposure Info | / May 06 2009 | ||||||
1 2 | RF Exposure Info | April 06 2009 / May 06 2009 | ||||||
1 2 | RF Exposure Info | / May 06 2009 | ||||||
1 2 | RF Exposure Info | April 06 2009 / May 06 2009 | ||||||
1 2 | Test Setup Photos | April 06 2009 | ||||||
1 2 | Test Setup Photos | |||||||
1 2 | RF Exposure Info | April 06 2009 / May 06 2009 |
1 2 | Revised Users Manual | Users Manual | 3.18 MiB |
Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:
(1) This device & its accessories may not cause harmful interference.
(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This Mobile Broadband USB Modem, model L-05A, is approved for use in normal size laptop computers only (typically with 12" or larger display screens). To comply with FCC RF exposure requirements, this modem should not be used in configurations that cannot maintain at least 5mm (approximately 0.2 inches) from users and bystanders, and 12mm (approximately 0.47 inches) from the top of the USB modem. This USB modem has been tested for compliance with FCC/IC RF exposure limits in the laptop computer(s) configurations with horizontal and vertical USB slots and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. When using this USB modem in your computer, it must not be co-located or simultaneously transmit with any other radio
(for example, Bluetooth or Wifi radios) in the computer. If the USB modem will be used with the mounting folder and extension cable combination, the modem must not be co-located or simultaneously transmit with any active antenna that may be located on your computer screen. DOCOMO W-CDMA GSM/GPRS System Thank You for Purchasing theData Commu-
nication Device L-05A Before or while using the L-05A, be sure to thoroughly read this manual and the individual manual for other operation devices to ensure its correct use. For further information, contact the "docomo Information Center" on the back of this manual. The L-05A is designed to be your close partner. Treat it carefully at all times to ensure longterm performance.
DOCOMO is not responsible for any economic losses incurred through lost communication opportunities caused by external factors such as malfunction or failure of the FOMA terminal, or electrical outage.
The FOMA terminal can be operated in FOMA Plus-Areas and FOMA HIGH-SPEED Areas.
The FOMA terminal can be used only via the FOMA network provided by DOCOMO and DOCOMO's roaming area.
This FOMA terminal does not support i-mode functions (i-mode mail, connection to official i-mode sites or i-ppli, etc.) For Those Who Use the FOMA Terminal for the First Time Before Using the FOMA Terminal Because the FOMA terminal uses radio waves, it may not function in locations where it is difficult for radio waves to penetrate, such as tunnels, underground passages and some buildings in areas where radio wave signals are weak or out of the service area. Even when you are on a higher floor of a tall building or condominium and nothing blocks your view outside, the FOMA terminal may not be able to receive or transmit signals. Also communication may be interrupted even when the Antenna Indication Lamp on the FOMA terminal lights green indicating a strong signal reception with 3 antenna indication bar.
Use the FOMA terminal in ways that do not disturb others in public places, crowded locations, or quiet locations.
The FOMA terminal communicates via radio waves by converting voices into digital signals. If you move into an area where signal reception is poor, the digital signals may not be accurately decoded and what you hear may differ slightly from what was actually said. If this is the first time for you to use the FOMA terminal, it is recommended that you read this manual in the following order to learn basic operations. 1. Learning the precautions. P7 2. Learning the names of parts and functions of the FOMA terminal. P18 3. Inserting the FOMA terminal into a PC . P24 4. Having the FOMA terminal recognized by your PC. P24 5. Setting up the FOMA terminal for communication. P66 The latest version of this manual can be downloaded from the DOCOMO web site. The URL of PDF for Instruction Manual http://www.nttdocomo.co.jp/english/support/manual/
index.html The URL and the information contained in the manual are subject to change without prior notice. How to Read/Refer to This Manual Contents L-05A Manual is composed ofL-05A Instruction ManualConnection Guideand L-05A INSTRUCTION MANUAL
(included CD-ROM)(this manual) recorded in CD-ROM. L-05A Instruction ManualConnection Guide The following contents such as connection to computer, troubleshooting methods, specifications of L-05A are written.
Contents/Precautions
Before Using the FOMA Terminal
Setting up
Appendix/Troubleshooting L-05A INSTRUCTION MANUAL (included CD-ROM)this manual Besides the above contents described inL-05A Instruction ManualConnection Guide, the contents of configuring communication through special application are also written. This manual is supplied with PDF. To view this manual, Adobe Reader (Version6.0 or later is recommended) is necessary.
L-05A Connection Software
DOCOMO Connection Manager
Configuring Network Manually
Overseas Use 1 How to Refer to This Manual This manual offers you the following methods to easily find a page describing functions or services you want to know about. See next page for detailed descriptions From the Index P141 Search from the index when you know the names of functions or services. From the Tabs on the Cover Front cover Search functions or services from the index tabs printed on the front cover. From the Contents Search from the contents that categorize functions. From the Main Features P5 P6 Search from the features when you want to use specific functions. Please understand thatL-05A Manual refers to theL-05Aas theFOMA Terminal. This manual describes, some steps and screens may differ depending on your operating environment. Reprinting all or parts of this manual is prohibited. Information contained in this manual is subject to change without prior notice. 2 A way to find a destination page is explained with an example of installing L-05A connection software on Windows
(including a driver). From the Index
P141 Search or a function name or a service name as shown below. From the Index Tabs on the Front Cover
Front cover Search for the function in the order of "Front cover"
"Chapter title page"
"Target page" as shown below. P35 The page describing installation of L-05A connection software on Windows
(including a driver)"
3 Displays a section title. Useful Information or suggestions relating to an operation. The above page is an example. Screen images and illustrations contained in this manual are for reference only. They may differ from those seen for the actual product. 4 Explains Operation steps A key screen for an operation step. This is an image of a screen seen on the PC. Numbers, settings or characters entered are for reference only. Index:
Searching each chapter is available. Contents How to Read/Refer to This Manual 1 Contents 5 Features of the L-05A 6 Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) 7 Handling and Care 12 Purchased Product and Accessories 15 Before Using the FOMA Terminal 17 Setting Up 31 L-05A Connection Software 49 DOCOMO Connection Manager 77 Names of Parts and Functions Using FOMA Card Available Communications Connecting FOMA Terminal with a PC Setting Up Windows version Macintosh version L-05A Connection Software Using Packet Communication Using SMS Using Phonebook Using Application Option DOCOMO Connection Manager Windows version Macintosh version Configuring Network Manually 89 Overseas Use 111 Appendix/
Trouble-
shooting 119 Configuring Dial-up Network Manually Conducting Communication
(Connecting Dial-up) International Roaming Service
(WORLD WING) Services Available Overseas Confirming before Using Overseas Setting the Searching Method for Available Networks Configuring Network AT Commands AT Command List Troubleshooting Error Messages Warranty and After-Sales Service Software update Main Specifications Export Controls of the Product and Accessories Intellectual Property Rights Index Contents/Precautions 5 FOMA (Freedom Of Mobile multimedia Access) is the name of a service provided by DOCOMO based on the W-CDMA system, which is certified as one of the global standards of 3rd generation mobile communication systems (IMT-2000). Features of the L-05A Correspondence with the FOMA HIGH-SPEED Area International Roaming Service You can enjoy high speed communication (Best effort systemat a maximum of 7.2Mbps for receiving and 5.7Mbps for sending.
The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending are theoretical values and they do not show the actual performance.
Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps.
The actual communication speed varies depending on surrounding communication conditions and network condition.
DOCOMO offers Internet connection services, such as mopera U. For details, visit the mopera U web site http://www.mopera.net/ (Japanese only) The packet communication in FOMA HIGHSPEED area, the amount of send/receive data is expected to increase. Note that the communication fees may become high. Communications are available from a PC even in foreign countries that have adapted the W-CDMA (3G) network system or GPRS network.P112 If you subscribed to the FOMA service after September 1, 2005, a separate subscription is not required. However, if you unsubscribed to the FOMA service subscription or canceled the service, a separate subscription is required. If you initially subscribed to the FOMA service before August 31, 2005, and have not subscribed to "WORLD WING", a separate subscription is required. This service is not available with some billing plans. FOMA Card Interchangeability The same FOMA card can be used in more than one FOMA terminal.P19 SMS Feature Allows you to send and receive SMS by using L-05A Connection Software P54 6 Contents/Precautions The following symbols indicate special warnings regarding product usage. Denotes things not to do (prohibition). Not disassembly Not liquids Denotes not to disassemble. Denotes not to use where it could get wet. Denotes mandatory instructions
(matters that must be complied with).
"Safety Precautions" are explained in the following 4 sections. General Precautions for the FOMA Terminal and FOMA Card 8 Precautions for the FOMA Terminal 9 Precautions for the FOMA Card 10 Notes on Using near Electronic Medical Equipment 11 Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) Before using your FOMA terminal, read these Safety Precautionscarefully so that you can use it properly. After reading the safety precautions, keep this manual in a safe place for later reference. These precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property. The signs below indicate the levels of danger or damage that may occur if the particular precautions are not observed . DANGER WARNING CAUTION This sign indicates that incorrect handling has a high possibility of causing death or serious injury. This sign indicates that incorrect handling poses a risk of causing death or serious injury. This sign indicates that incorrect handling poses a risk of causing injury or damage to the product or property. Contents/Precautions 7 General Precautions for the FOMA Terminal and FOMA Card Do not use or leave the FOMA terminal and FOMA card in places with a high temperature such as in cars under the blazing sun. Deformation, malfunction heating or the deterioration of performance may result. Also, part of the case could get heated, causing bare skin burns. Not disassembly Not liquids Do not disassemble Disassemble, remodel or solder the terminal and FOMA card. Fire, injury, electric shock or malfunction may result. Do not let FOMA terminal and FOMA card get wet. Contact with water or other liquids may cause heating, electric shock, fire, malfunction or injury. Take care not to use the terminal and FOMA card in areas where they could get wet. WARNING Do not put the FOMA terminal or FOMA card in microwave ovens or other heating. The FOMA terminal may over heat, smoke or catch fire, or its circuit parts may burst. Do not throw the FOMA terminal or FOMA card, or subject them to severe shocks. Malfunction or fire may result. Be careful not to let electro conductive materials (metal pieces, pencil leads etc.) contact with the connector terminal. Also, make sure that these are not entered into the inside of the FOMA terminal. Fire or other malfunctions may result from a short circuit. Make sure you have the power of the computer which is connected with FOMA terminal switched off before you go near a flammable gas such as gasoline fumes. Using the terminal in such an environment may result in a fire. 8 Contents/Precautions CAUTION Do not place the FOMA terminal or FOMA card on unstable locations such as wobbly tables or slanted locations. The FOMA terminal or FOMA card may fall, resulting in injury or malfunction. Do not store the FOMA terminal or FOMA card in humid or dusty places, or in hot areas. Malfunction may result. If children use the FOMA terminal or FOMA card, a guardian should explain the precautions and correct operations. The guardian should also make sure that the instructions are followed during use. Injury may result. Keep out of reach of babies and infants. Accidental swallowing or injury may result. Precautions for the FOMA Terminal WARNING Do not put the FOMA terminal in the place where it could be affected by an expanded airbag, e.g. on the dashboard. If the airbag expands, the FOMA terminal could hit you and others, causing accidents such as injury and the FOMA terminal could get malfunction or damaged. Do not place the terminal in breast or inner pocket when electronic medical equipment is near by. Using FOMA terminal closed to electronic medical equipment may result malfunction. Do not allow liquids such as water, or foreign materials such as metal pieces or flammable materials to get into the FOMA card opening in the FOMA terminal. Fire, electronic shock or malfunction may result. Contents/Precautions 9 Turn off the FOMA terminal in places where use is prohibited such as airplanes or hospitals. Electronic and electronic medical appliances may be adversely affected. For use inside medical facilities, make sure that you comply with their regulations. Remove FOMA terminal from the USB port in places near high-precision electronic devices or devices using weak electronic signals. The FOMA terminal may possibly cause these devices to malfunction. Electronic devices that may be affected Hearing aids, implanted cardiac pacemakers, implanted defibrillators, other medical electronic devices, fire alarms, automatic doors and other automatically controlled devices. If you are using an implanted cardiac pace maker, implanted defibrillator or any other electronic medical device, consult the manufacturer or retailer of the device for advice regarding possible effects from radio waves. CAUTION Electronic devices in some types of cars can be affected by use of the FOMA terminal. For safety's sake, do not use the FOMA terminal inside such cars. Itching, rash or eczema may be caused depending on your physical conditions or predisposition. If an abnormality occurs, stop using the FOMA terminal immediately, and then seek medical attention. Metal(chrome plating) is used to the following parts. Parts that are used: USB connector Precautions for the FOMA Card CAUTION Be careful when removing the FOMA card(IC portion). Your hands or fingers may be injured. 10 Contents/Precautions Notes on Using near Electronic Medical Equipment The description below meets Guideline on the Use of Radio-communication Equipment such as Cellular Telephones - Safeguards for Electronic Medical Equipment by the Electromagnetic Compatibility Conference. WARNING Be sure to adhere to the following regulations inside medical facilities. Keep the FOMA terminal out of operating rooms, intensive care units (ICUs) or coronary care units (CCUs). Turn off the PC in hospital wards. Turn off the PC in hospital lobbies and corridors if electrical medical devices could be nearby. If the medical facility has specific zones where use or possession of mobile terminals is prohibited, follow those regulations. If the function which automatically turns on the power is set, cancel the setting before turning off your PC. Turn off the PC in crowded trains or other public places where implanted cardiac pacemaker or defibrillator wearers could be nearby. Signals from the FOMA terminal may affect the operation of implanted cardiac pacemakers or defibrillators. If you use an implanted cardiac pacemaker or implanted defibrillator, use the mobile terminal 22cm or more away from the implanted cardiac pacemaker or implanted defibrillator. Operation of an implanted cardiac pacemaker or implanted defibrillator may be affected by radio waves. Patients using electronic medical equipment other than implanted cardiac pacemakers or implanted defibrillators
(using outside medical facilities for treatment at home, etc.) should check the influence of radio waves upon the equipment by consulting the manufacturer. Operation of electronic medical equipment may be affected by radio waves. Contents/Precautions 11 Handling and Care General Usage Guidelines Keep the FOMA terminal away from water. The FOMA terminal and FOMA card are not waterproof. Do not use the terminal in places with high humidity such as a bath or where rain may get it wet. If you carry the card close to your body, moisture from sweat may corrode the internal parts causing a malfunction. Note that malfunctions deemed to be caused by water are not covered by the warranty, and may be impossible to repair. Since these malfunctions are not under warranty, even when repair is possible, it will be done at the user's expense. Clean the FOMA terminal with a dry, soft cloth
(Lens cleaning cloth). If the FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing may disappear or color may fade. Keep the connector contacts clean with a dry, soft cloth. Dirty contacts can result in intermittent connections. Do not place the equipment near air conditioner outlets. Condensation may form due to rapid changes in temperature, and this may corrode internal parts and cause malfunction. Do not place the FOMA terminal where excessive force will be applied to it. If FOMA terminal is inserted to a full bag, or placed in a pocket and sat on, its internal PCBs may be damaged or malfunction. Such damage is not covered by warranty. Read the individual manual attached to the FOMA terminal. FOMA Terminal Avoid using in extremely high or low temperatures. The FOMA terminal should be used within a temperature range from 5 C to 35 C and a humidity range from 45 % to 85 %. FOMA terminal may affect fixed phones, televisions or radios in use nearby. Use as far as possible from such appliances. Keep a separate record of any information stored on the FOMA terminal and store the copies in a safe location. DOCOMO assumes no responsibility for the loss of any of your data. 12 Contents/Precautions Remove the FOMA terminal from the PC when transporting. Malfunction or damage may result. It is normal for the FOMA terminal to become warm during use. You can continue to use it even when it is warm. Take care not to drop the FOMA terminal when removing the FOMA terminal from the carrying case. When it is not in use, keep the FOMA terminal in its carrying case to keep the connector contacts clean. Dirty contacts may result in intermittent connections. When putting the FOMA terminal in carrying case, keep it away from wet or high temperature place. Pay attention not to put excessive force on the FOMA terminal. Transformation, tarnish, color staining may result. FOMA Card Do not put excessive force on the FOMA card when inserting or removing it into the FOMA terminal. It is normal for the FOMA card to become warm during use. You can continue to use it even when it is warm. Always keep the IC portion of the FOMA card clean. Clean the FOMA card with a soft, dry cloth (Lens cleaning cloth). Be sure to keep a separate note of the information registered to the FOMA terminal. DOCOMO is not responsible for any losses of registered information. Visit DOCOMO shop to return the FOMA card for the environmental purpose. Avoid extreme temperature. Do not scratch, touch carelessly or short circuit the IC portion. Data loss or malfunction may result. Do not drop or give shock to the FOMA card . Malfunction may result. Do not bend or put heavy things on the FOMA card. Malfunction may result. Do not insert UIM into the FOMA terminal with labels or stickers attached on. Contents/Precautions 13 CAUTION Do not use the modified FOMA terminal. Using modified FOMA terminal result in violating the law of Electromagnetic Compatibility. FOMA terminal has been complied with technical standard of wireless equipment stipulated by law of Electromagnetic Compatibility. As for the proof, the technical standard compliance mark, is indicated in the inscription seal. If FOMA terminal is modified by turning the screw to the left to disassemble, technical standard compliance becomes invalid. Please do not use FOMA terminal during the time when technical standard compliance is being invalid, since you are in violation of the law of Electromagnetic Compatibility. 14 Contents/Precautions Purchased Product and Accessories L-05A Terminal (With Rear Cover L13, Warranty) L-05A CD-ROM L-05A Instruction ManualConnection Guide Carrying Case (Sample)
L-05A Connection Software (For Windows/Macintosh
DOCOMO Connection Manager (For Windows/Macintosh
L-05A INSTRUCTION MANUALPDF Software specifications are subject to change without prior notice. USB Extension Cable (Sample) Use when "USB Extension Cable" is written in this manual. Mounting folder (Sample) Use when "A mounting Folder" is written in this manual. Contents/Precautions 15 Before Using the FOMA Terminal Names of Parts and Functions 18 Using a FOMA Card 19 Available Communications 23 Connecting FOMA Terminal to a PC 24 17 Names of Parts and Functions b c d a a USB ConnectorP25 Connection contacts to a PC. Pull out from the FOMA terminal and use. The tip part of the USB connector is able to turn 90 degree. However, only one direction is available to turn. b Antenna Part The antenna is inside the FOMA terminal. c PWR LampP19 Indicates the power supply conditions. d IDLE/BUSY LampP19 Indicates the FOMA terminal status. 18 Before Using the FOMA Terminal Examples of a Ex. 1:
Ex. 2:
Mode Indication Lamp Operation indicating lamp FOMA Terminal Status When powered on Waiting to connect to the FOMA network a b Using a FOMA Card The FOMA card is an IC card that stores personal information such as your phone number. Without a FOMA card installed in the FOMA terminal, you cannot use data communication. For detailed information, refer to FOMA Card Manual. Inserting/Removing Inserting aPower Indication Lamp bMode Indication Lamp
Green Green Inserting the UIM with two hands. a While pushing the cover in the direction of a, slide the rear cover in the direction of b. Lift the cover as shown by c. Packet communication SMS PIN Attempting to communicate Communicating While receiving Opening SMS Sending SMS PIN Lock Waiting to unlock PIN1 Green Green Green
(Flash) Green Green Green Green Blue
(Flash) Blue Green Green Green
a b c R Rear Cover Before Using the FOMA Terminal 19 b Insert the UIM into slot at the direction of arrow with the IC chip side down IC is faced FOMA card Notch FOMA card slot c Fit the rear cover to the ditch of FOMA terminal at approximately 3mm from the top tip of the FOMA terminal. While pressing along direction b, slide the rear cover along direction a till hear rear cover clicked. Removing Remove the UIM with two hands. a While pushing the cover in the direction of a, slide the rear cover in the direction of b. Lift the cover as shown by c. a b c Rear Cover b Slide the UIM in the direction of arrow and remove it from the FOMA Card slot. ab Approx.3mm FOMA card 20 Before Using the FOMA Terminal c Fit the rear cover to the ditch of FOMA terminal at approximately 3mm from the top tip of the FOMA terminal. While pressing along direction b, slide the rear cover along direction a till hear rear cover clicked. ab Approx.3mm Note
Make sure not lose the removed FOMA card.
Make sure to check the direction of FOMA card. IC
Be careful not to scratch FOMA card's IC parts.
Inserting FOMA card in the reverse direction may cause malfunction. Inserting and removing FOMA card with an excessive force may cause damage to your FOMA card.
Do not remove FOMA card while FOMA terminal is inserted to a PC, it may causes damage to your FOMA card. PIN1 Code You can set PIN codes (Personal Identification Number) for FOMA Card. The default setting for the PIN1 code is
"0000". The PIN1 code is a 4 to 8-digit security code to be entered every time the FOMA terminal is turned on for user verification to prevent any unauthorized use by others. If your FOMA card is set to require a PIN1 code, data communication cannot be performed until the PIN1 is entered. Start the L-05A High Speed Utility and verify the PIN1 code, or set (P69)not to verify the PIN1 code in advance. Changing the PIN1 Code You can change the PIN1 code to any number. To prevent any unauthorized use by third parties, change it to your own number. If you improperly enter the PIN1 code 3 times in a row, further entry is locked automatically (PIN lock), so be sure to keep a separate note of the numbers you set.
Entering PIN1 Code/ Changing PIN1 codeP70 PIN Unblocking Code The PIN Unblocking Code is the number used to unblock the PIN1 code. You are notified of your PIN Unblocking Code when you purchase your FOMA terminal. Entering the Unblocking Code (8-digit) unblocks the PIN lock. If you improperly enter the Unblocking Code 10 times in a row, the FOMA card locks automatically, so be sure to keep a separate note of the number. Before Using the FOMA Terminal 21 Start up L-05A Connection Software The PIN1 code Verification screen appears Enter PIN1 Code Incorrect entry 3 times in a row Enter Unblocking PIN Code OK Incorrect entry 10 times in a row You can set a new PIN1 code Contact a DOCOMO shop 22 Before Using the FOMA Terminal FOMA Card Types Please be aware that the FOMA card (Blue) has different functions from the FOMA card (Green/White) as follows:
FOMA card
(Green/White) Up to 20 digits Up to 26 digits FOMA card Function
(Blue) This terminal allows up to 20 digits. The number of digits of a phone number that can be saved to the FOMA card Phonebook WORLD WING Not available Available WORLD WING WORLD WING is DOCOMO's FOMA international roaming service that provides telephone and other types of mobile communications. It allows the subscriber to use the same phone number overseas as in Japan by inserting a FOMA card(green/white) into a FOMA terminal or a mobile phone designed for overseas use.
If you subscribed to the FOMA service after September 1, 2005, a separate subscription is not required. However, if you unsubscribed to the FOMA service subscription or canceled the service, a separate subscription is required. If you initially subscribed to the FOMA service before August 31, 2005 and have not subscribed to "WORLD WING", a separate subscription is required.
This service is not available with some billing plans.
Your FOMA card (green/white) is lost or stolen overseas, contact DOCOMO immediately and temporarily suspend your subscription. For contact information, see "docomo Information Center" on the back of this manual. Call and communication charges after the terminal was lost or stolen are still charged to you. Note
Communication fees become high when performing communications with large amount of data such as browsing websites with many graphics or downloading data.
Data communication fees under international roaming differ from those in Japan.
FOMA terminal does not support 64K data communication.
This FOMA terminal does not support Remote Wakeup.
This FOMA terminal does not support FAX communication. Available Communications Packet Communication Fees for this communication method are based on the amount of exchanged data. You can perform data communication at a maximum of 7.2Mbps for receiving and 5.7Mbps for transmitting by using a connection that allows FOMA communication such as mopera U, one of DOCOMO's Internet connection services. The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending is theoretical values and does not show the actual ones. The actual communication speed depends on communication environment and network congestion.
You can perform communication using international roaming undermopera U
Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps.
The communication speed varies depending on the access point and radio wave status.
The communication speed varies depending on the access point under international roaming.
Use theDOCOMO Connection Managerin the CD-ROM to check the approximate number of transmission bytes and charges under the communication. Before Using the FOMA Terminal 23 Usage Notes Internet service provider fees Fees to an Internet service provider may be required to connect to the Internet. These fees are added to the FOMA service fees and are paid to your Internet service provider directly. For details on connection fees, contact your Internet service provider. You can subscribe to such asmopera U, one of DOCOMO's Internet connection services. Charge for subscribing mopera U is required. For service and connection/settings of mopera, visit themopera web site. http://www.mopera.net/mopera/index.html (Japanese only) User authentication to access networks Depending on the access point, user authentication (ID and password) may be required to connect. If required, enter the ID and password from the dial-up network. The ID and password will be provided by the network administrator of your Internet service provider or the access point. For details, contact your provider or access point network administrator. Connecting FOMA Terminal to a PC When connecting FOMA terminal with computer for the first time, it is required to install L-05A connection software (including a driver). For installing L-05A connection software, refer to the followings.
For Windows: "Preparation for using L-05A" (P35)
For Macintosh: "Preparation for using L-05A" (P42) Inserting a Turn on a PC b Connecting the FOMA terminal with a PC When using a mounting folder and a USB extension cable
Use a mounting folder and a USB extension cable to fix on the top of a PC Requirements for packet communication The following conditions must be met to perform communications using the FOMA terminal. However, a connection may not be established if traffic is heavy at the base station or if radio signals are weak.
The FOMA terminal must be in a FOMA network or DOCOMO's roaming service area.
The access point corresponds to the FOMA packet communication. 24 Before Using the FOMA Terminal aPull out the projection part of USB connector 180 degree by fingertip cPut the FOMA terminal between the mounting folder and fix on the top of the PC Projection part bHold the connector part of USB extension cable and insert into the USB connector near the FOMA terminal along arrow direction USB connector Mounting folder PC dHold the connector part of USB cable and insert into PC USB port along arrow direction USB extension cable USB port USB extension cable Before Using the FOMA Terminal 25 When connecting with a PC directly
Insert the FOMA terminal into a PC USB port and use it directly.
The USB connector of FOMA terminal is able to turn 90 degree complying to directions of USB port aPull out the projection part of USB connector 90 degree by fingertip Projection part USB connector bThe FOMA terminal body turn the tip part of USB connector 90 degree as shown in the illustration cInsert the USB connector of FOMA terminal into a PC USB port USB connector USB port It is available to use without turning USB connector 90 degree as the above-mentioned procedure b.
USB connector USB port Note
Refrain from turning the FOMA terminal after inserting USB connector into PC USB port. Malfunction or damage may result when subject the FOMA terminal to severe shocks due to carelessness. 26 Before Using the FOMA Terminal c Start communication connecting Note Power Indication lamp Mode Indication Lamp
Confirm whether power indication lamp changes to red and mode indication lamp changes to green.
Using "L-05A connection software"P49
Using "DOCOMO connection manager"P77
Configuring manually (OS Standard)P89 Removing a End data communication
If the L-05A connection software/DOCOMO connection manager is already running, exit the L-05A connection software/DOCOMO connection manager. Verify that data connection is disconnected. b Remove the FOMA terminal When using a mounting folder and a USB extension cable aHold the connector part of a USB extension cable and pull out the FOMA terminal from PC USB port along arrow direction USB port USB extension cable Before Using the FOMA Terminal 27 bRemove the FOMA terminal along with the mounting folder from the top of the PC. Remove the mounting folder from the FOMA terminal dPack the USB connector into the FOMA terminal Mounting folder PC USB connector When connecting to a PC directly aHold the USB connector part of FOMA terminal. Pull out the FOMA terminal straightly from PC USB port cHold the connector part of the USB extension cable and pull out from the USB connector near the FOMA terminal along arrow direction USB connector USB port USB connector USB extension cable 28 Before Using the FOMA Terminal bTurn the tip part of the USB connector 90 degree as shown in the illustration USB connector cPack the USB connector into FOMA terminal USB connector Caution
If you force to remove FOMA terminal and pull out the USB extension cable, this may result malfunction.
Removing FOMA terminal from USB connector during data communication may suspend data communication and result malfunction or data losses. Before Using the FOMA Terminal 29 Setting up Setting up 32 Windows Version 35 Macintosh Version 42 31 Setting up Data communication with L-05A
"Communication configuration file (Driver)" and "L-05A connection software" are required to install for a PC to recognize the FOMA terminal. "Communication configuration file (Driver)" will be installed along with "L-05A connection software". Although data communication is available with only L-05A connection software, if necessary using it after installing DOCOMO connection manager in addition is also available. Data communication is also available based on configuring manually after installing L-05A connection software. Installation of L-05A connection software Since L-05A has zero installation, when connecting the FOMA terminal to a PC for the first time, "L-05A connection software" installation screen appears automatically. "Zero installation" is supported by the PC with Windows OS in it. If zero installation works improperly, install L-05A connection software with the included CD-ROM. In addition, although Macintosh does not support the zero installation feature, installation continues through the CD-
ROM icon appears when connecting the FOMA terminal to a PC. The procedure of setting up is described on the next page. 32 Setting up Work Flow of Setting up Connecting the FOMA terminal with a PC Windows VersionP35 Macintosh VersionP42 Preparing the included CD-ROM Windows VersionP38 Macintosh VersionP45 Installing L-05A connection software (Driver) Windows VersionP39/ Macintosh VersionP45 Confirmation after Setup Using L-05A connection software Using DOCOMO connection manager Configuring manually(Only Windows) Operation configurations of L-05A connection softwareP66 Installing DOCOMO connection manager Windows VersionP79 Macintosh VersionP83 Communication configuring manuallyP90 Communication connection with L-05A connection softwareP50 Operatino configuration/communication connection with DOCOMO connection manager
DOCOMO connection manager manual Communication configuring manually with OS functionP109 Setting up 33 1 DOCOMO does not guarantee the operation under the supported OS of the OS is changed through update. 2 Required memory or available hard disk space may vary depending on the system environment of a PC. 3 Only Mac with CPU made by Intel Corporation is available. For latest information of operation environment, visit DOCOMO's "international web site"
Note
The software may not work depending on the operating system environment. DOCOMO does not guarantee any operation other than the environment operation described on the left side. Operating Environments Using this FOMA terminal under the following operational environments. Item PC Main Unit Requirement
Available CD-ROM drive to use from PC-AT compatible.
USB port (Comply with Universal Serial Bus Specification Rev1.1/2.0)
DOCOMO is not responsible for any incompatibility of the operation performed through the USB Hub (including USB port available from the monitor, keyboard, etc.)
Display resolution of 800600 pixels, High Color (65.536) or higher is recommended. OS1 Required Memory2 Hard Disk Space2 Windows 2000 SP4 or later (Japanese versions) Windows XP SP2 or later (Japanese versions) Windows Vista SP1 or later (Japanese versions) Mac OS X 10.4.11 (Japanese versions)3 Mac OS X 10.5.6 (Japanese versions)3 Windows 2000 : 64Mbytes or more Windows XP : 128Mbytes or more Windows Vista : 512Mbytes or more Mac OS X 10.4.11512Mbytes or more Mac OS X 10.5.6512Mbytes or more 50Mbytes or more available space 34 Setting up Windows Version The L-05A connection software only need to be installed when you connect the FOMA terminal to your PC for the first time. Note
Do not remove the FOMA terminal while installing.
Installation may take several minutes depending on the PC you use.
Do not install or uninstall during data communication.
When installing, make sure to install from the account with PC supervisor privileges. An error will occur during installation if you install from the account without these privileges.
For details on setting up PC supervisor privileges, contact your computer manufacturer or Microsoft Corporation. Preparation for Using L-05A Setting Zero Installation (Auto) For Windows Vista a Connect the FOMA terminal with a PC The setup screen of L-05A connection software is automatically displayed by zero installation.
"" screen will be displayed depending on setting.If the screen is displayed, check "
" and select "Launcher.exe"
np When the Setting up screen of L-05A connection software is not automatically displayed, install with the included CD-ROM (P38) Setting up 35 d Click " (I Agree)"
Installation starts. e Click "(Next)"
b Click "(Allow)" on "
(User account control)" screen For Windows XP/2000
Because "(User account control)"
screen is not displayed, follow the next step c Click "(Next)"
36 Setting up f Click [OK]
g Click "(Finish)"
h Confirm whether the FOMA terminal is recognized by PC On the lower right side of task tray, "
(Device driver software is being installed)" message is displayed, and the FOMA terminal is recognized automatically. If the FOMA terminal is recognized properly, "
(The device is ready for use)" message is displayed. Installation of L-05A communication configuration file
(Driver) continues. Setting up 37 For Windows XP
On the lower right side of task tray, "
(A new hardware has been found.)"
message is displayed, and the FOMA terminal is recognized automatically.
If the FOMA terminal is recognized properly, "
(A new hardware has been installed and ready for use.)"
message is displayed. For Windows 2000
The warning screen of removing device is displayed which has nothing to do with using continually.
"(A new hardware has been found.)" message is displayed, and the FOMA terminal is recognized automatically. Setting Manually (CD) For Windows Vista a After starting a PCInsert the included CD-
ROM into the PC b "(Start)""(All programs)""(Accessory)"Click
"(Specify a file name and run)"
For Windows XP/2000 Click [(Start)]
(Specify a file) c Enter "<CD-ROM>:Windows L-05A StartCD.exe" in "
(Name)" Click "OK"
"" screen will be displayed depending on setting.If the screen is displayed, check "
" and select "Launcher.exe"
d Perform the same operations as those after step 2 or later on "Setting Zero Installation
(Auto) (P36)"
38 Setting up Confirmation after Installation Confirming L-05A Connection Software a Double click L-05A connection software icon When the following screen is displayed, the confirmation of installation finishes. Confirming the Installed L-05A Configuration File
(Drivers) Confirm whether L-05A Communication Configuration File
(Drivers) is set in a PC. For Windows Vista a Click
"(Start)""
(Control panel)""
(System and maintenance)""
(Device manager)""(Continue)"
For Windows XP Click "(Start)""(Control panel)""(Performance and maintenance)""(System)""
(Device manager)" of "(Hardware)"
tab For Windows 2000 Click "(Start)""(Settings)""
(Control panel)""(System)""
(Device manager)" of "(Hardware)"
tab Setting up 39 b Click each device display to confirm the driver name installed
Confirm whether the driver name is displayed below "
(COM LPT)(Port (COM and LPT))", "(Modem)"
Note
If FOMA terminal is not recognized through the PC's USB port, try other available USB port. FOMA terminal may not be recognized properly with some USB port of PC.
When communicating data with L-05A connection software, application operation of L-05A is required. P66
When communicating data with DOCOMO connection manager without L-05A connection software, installation of DOCOMO connection manager is required.P79
When communicating data with neither L-05A connection software nor DOCOMO connection manager, configure it manually.P90
COM port number differs depending on user and PC. Device name Port
(COM and LPT) Modem Driver name FOMA L05A USB Serial1 Device FOMA L05A USB Serial2 Device FOMA L05A 40 Setting up Uninstalling L-05A Connection Software
(including a driver)
Before uninstalling, remove the FOMA terminal from the PC.
When uninstalling, make sure to install from the account with PC supervisor privileges.
Make sure to save important data in FOMA card. Uninstallation will results in data loss when Phonebook or SMS data is saved in PC. For Windows Vista a
"(Start)"" (All programs)""L-05A (L-05A connection software)"Click "Uninstall"
For Windows XP
" (Start)"" (All programs)"
"L-05A (L-05A connection software)"Click
"Uninstall"
For Windows 2000
" (Start)"" (Program)""L-05A
(L-05A connection software)"Click "Uninstall"
b Click "(Allow)" on "
(User account control)" screen If "(Cancel)" is clicked, uninstallation will be stopped. For Windows XP/2000
Since " (User account control)"
screen is not displayed, follow the next procedure. c Click " (Uninstall)"
d Click [OK]
Setting up 41 Macintosh Version When installing L-05A connection software, make sure to finish " (DOCOMO connection manager)" first. Note
Do not remove the FOMA terminal while installing.
When installing, make sure to install from the account with PC supervisor privileges. Preparation for Using L-05A Setting Zero Installation (Auto) a Connect the FOMA terminal with a Mac CD-ROM icon is displayed on the desktop. b Double click the CD-ROM icon e Click [OK]
f Click " (Finish)"
Uninstallation finishes. 42 Setting up c Double click "L-05A
.mpkg (L-05A connection software installer.mpkg)"
e Click " (Continue)"
d Click " (Continue)"
f Confirm " (The license agreement)". If agree with the content, click
" (I Agree)"
Setting up 43 g Click " (Install)"
i Click "(Continue installing)"
h Enter administrator passwordClick "OK"
j Click "(Restart)"
Mac restarts. Installation finishes. 44 Setting up Setting Manually (CD) a Start MacInsert the CD-ROM into Mac b Double click CD-ROM icon"Mac""L-05A CD-ROM icon on desktop appears. connection software"
c For subsequent steps, operate the same procedures as those after procedure 3 in "Set Zero Installation (Auto)" (P43) Confirmation after Installation Confirming L-05A Connection Software a Double click L-05A connection software icon When the following screen is displayed, the confirmation of installation finishes. Note
When communicating data with L-05A connection software, setting application operations of L-05A is required.P66
When communicating data with DOCOMO connection manager without L-05A connection software, installation of DOCOMO connection manager is required.P79 Setting up 45 Uninstalling L-05A Connection Software
(including a driver)
Before uninstalling, remove the FOMA terminal from the Mac.
When uninstalling, make sure to install from the account with PC supervisor privileges.
Make sure to save important data in FOMA card. Uninstallation will results in data loss when Phonebook or SMS data is saved in PC.
End "DOCOMO connection manager" when uninstalling L-05A connection software. Insert the included CD-ROM into a Mac CD-ROM icon is displayed on the desktop. a b Double click the CD-ROM icon c Double click "Mac"
d Double click "L-05A (L-05A connection software)"
e Double click ".app
(Uninstaller.app)"
46 Setting up f Click "(Uninstall)"
g Enter administrator password Click "OK"
h Confirm whether the FOMA terminal is connected to USB port before restarting i Click "(Restart)"
Mac restarts. Uninstallation finishes. Setting up 47 L-05A Connection Software L-05A Connection Software 50 Using Packet Communication 53 Using SMS 54 Using Phonebook 63 Using Application Option 66 L-05A connection software is available to use on either Windows or Macintosh. Despite the display images of Windows version and Macintosh version are a little different, icons on the screen and available functions are same. Please note that in this chapter the descriptions are based on screen images of Windows. 49 L-05A Connection Software The L-05A connection software allows you to use packet communication/SMS/Phonebook. Using Packet CommunicationP53 Allows you to easily use packet communication. Launching and Exiting Connection Software (For Windows) Launching
Double click Exiting created on the desktop.
Click located on the top of main application screen. Using SMSP54 Features of composing messages, Inbox, Outbox, Drafts box and Saving to FOMA card are available. Using PhonebookP63 Features of composing messages, adding and deleting new group, transferring group, adding new item, modifying user, delection are available. Using Application OptionP66 Confirm the amount of packet communication data usage, configure internet option, configure FOMA card, enter PIN1 code, configure the connection type (PDP), reset FOMA terminal, configure network are available. Note
Data of L-05A connection software will be saved in PC if no destination is specified. 50 L-05A Connection Software Launching and Exiting Connection Software (For Macintosh) If connect with L-05A, it will be recognized as a CD-ROM first. For recognizing as a modem, drug the CD-ROM icon into trash. Launching
Launch "Finder" "(Application)" "L-05A
.app (L-05A connection software.app)"
Exiting
Menu bar "L-05A (L-05A connection software)"
"L-05A (Quit L-05A connection software)"
Main Application Screen
(Out of service area) In no signal reception area Internet Connection International Roaming Unopened message found 1 W-CDMA (3G) A third generation mobile communication network complying with 3GPP Global standards. 3Gpp means 3rd Generation Partnership Project. The local standardization organization established for the development of common technical specifications related to 3rd Generation Mobile Communication Systems (IMT-2000). 2 HSDPA (Short for High Speed Downlink Packet Access) HSUPA (Short for High Speed Uplink Packet Access) A high speed type of W-CDMA data communication. It is called
"3.5G" since it is the improvement version of 3rd generation
(3G) cell phone (W-CDMA). 3 GSM (Short for Global System for Mobile Communication) The second generation mobile communication network in a digital communication system that is most widely used around the world. 4 GPRS (Short for General Packet Radio Service) GPRS is the 2.5 generation mobile communication system that enables highspeed packet communication using GSM. a b c d e f a List of icon indicating FOMA terminal status Signal reception level Strong Weak Network type W-CDMA1, HSDPA2, HSUPA2, GSM3/GPRS4 L-05A Connection Software 51 b StatusMessage display area
FOMA terminal,warning messages, operation status, network name.
The information of currently accessed network operator is displayed when "network information" is set to "display"P116 f Current time/data display area
Current date and time are displayed.
Time is set conformable to PC time. Confirming My Number Click will see the following messages displayed. from the main application screen, and then you Version information My number c Buttons for connecting and disconnecting to Internet
Click this button when connecting or disconnecting Internet. d Data communication information display area
During connecting to Internet, connection time and amount of loaded data are displayed. e Operation button
Buttons are available for SMS, Phonebook, Settings and Information.
: SMSP54
: (Phonebook)P63
: (Settings)P66
:(Information) P51 52 L-05A Connection Software Using Packet Communication You can use packet communication if click main application screen. from the Start Packet Communication a Click from the main application screen
Displays connection time, amount of downloaded data connection status icon
. Disconnecting to Packet Communication a Click from the main application screen
Packet communication will be disconnected after the messages displayed "(Connection is being disconnected)". Note
The packet communication may be automatically
disconnected depending on the network status or location. In packet communication, fees apply on the amount of sent/received data. Note that the communication fees may become high if you perform heavy communications such as by browsing websites which include large multimediacontents or if you download a lot of data.
Data communication fees under international roaming differ from those in Japan. L-05A Connection Software 53 Using SMS Allows you to use various SMS features if click the main application screen.
Maximum number of SMS stored in PC is 1000. Depending on PC's available hard disk space, number may differ. (Excluding FOMA card SMS box) from When Receiving SMS The following screen appears when receiving SMS. a Click Composing SMS a Click from the SMS application screen b Enter the SMS from the SMS composing screen
SMS can be entered up to 70 characters (English alphabet
& numeric characters can be entered up to 160 characters) Composing SMS Transferring to phonebook Entering receiver's phone number Message/receiversreset, sending SMS Composing SMS Outbox Inbox Drafts box FOMA card SMS box 54 L-05A Connection Software c Enter the receiver's phone number
Enter the receiver's phone number by clicking the input or click to display phonebook and decide a receiver.
If you edit SMS or receiver, enter directly in SMS edit screen or phone number field to modify. Note
You will be prompted whether you want to save the SMS to Drafts box or not, when moving to other applications or when failure incurred in transmission. If you click
, the SMS will be saved to Drafts box. If you click , SMS will not be saved to Drafts box. the d Click
SMS are being sent.
Result of sending SMS.
Setting "SMS(Multi-refuse SMS)"
By using the following AT command, SMS is set in terminal software. For details of terminal software, refer to "
(Configuring Network Manually)" P90 SMS refuse: AT+CUSD=1,"*141*1#",15 Unlock SMS refuse: AT+CUSD=1,"*141#",15 L-05A Connection Software 55 Inbox
Allows you to store SMS to Inbox. Confirming SMS from Inbox a Click
Displays the list of received SMS. from the SMS application screen Replying and Forwarding SMS from Inbox a Click b Select the reply/forward from Inbox list from SMS application screen Click
"(Reply)/(Forward)" menu is displayed b Select and confirm the SMS from the SMS list
: SMS opened
: SMS unopened
"(Reply)" Receiver phone number is automatically entered and move to the SMS composing screen.
"(Forward)" SMS to be sent are automatically entered, and move to the SMS composing screen. The receiver phone number is required to enter. Receiver phone number Browse phonebook application screen P64 c Click Note
The SMS status becomes opened once you click the received SMS. 56 L-05A Connection Software Copying Inbox SMS to FOMA Card a Click b Select the SMS and right-clickClick "FOMA from SMS application screen
(Save to FOMA card)"
Outbox
Allows you to store SMS in Outbox. Confirming SMS from Outbox a Click
Displays the list of sent SMS. from SMS application screen
"FOMA(Save to FOMA card)": Copy the received SMS of PC to FOMA card.
You can copy 20 SMS in total including sent and received to your FOMA card. b Select and confirm the SMS from the list Deleting SMS from Inbox a Click b Select the SMS to delete from the list of from SMS application screen InboxClick
"(Delete)""(Delete all)" menu displayed
"(Delete)"
"(Delete all)" Delete all SMS The message for confirming is displayed. Delete the selected SMS. c Click Sent SMS Receiver's phone number Browse phonebook application screen P64 L-05A Connection Software 57 Editing SMS from Outbox a Click from SMS application screen b Select the SMS to send from the list of OutboxClick
SMS composing screen Copying SMS from Inbox to FOMA Card a Click b Select the SMS and right clickClick "FOMA from SMS application screen
(Save to FOMA card)"
You will be prompted with SMS composing screen as soon as the receiver phone number and SMS are entered.
You can add or edit SMS and receiver phone number. c Click
"FOMA(Save to FOMA card)" Copy sent SMS stored in a PC to FOMA card.
Up to 20 received and sent SMS can be stored in FOMA card. Note
The information of time will not be saved when SMS are copied from Inbox to FOMA card. 58 L-05A Connection Software Deleting SMS from Outbox a Click b Select the SMS to delete from the list of from SMS application screen InboxClick
"(Delete)""(Delete all)" menu is displayed.
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click Drafts Box
Allows you store temporary SMS in Drafts box. Confirming SMS from Drafts box a Click from SMS application screen
The list of SMS from Drafts box will be displayed. b Select and confirm the SMS from the list of Drafts box L-05A Connection Software 59 FOMA Card SMS Box
Allows you to save SMS copied from Inbox or Outbox are to FOMA card SMS box.
Up to 20 received and sent SMS can be stored in FOMA card. Confirming SMS from FOMA Card SMS Box from SMS application screen a Click
The list of SMS from Drafts box will be displayed. b Select and confirm the SMS from the FOMA card SMS box
:Received SMS
(SMS unopened)
:Received SMS
(SMS opened)
:Sent SMS Editing from Drafts Box a Click b Select the SMS to edit from the list of drafts from SMS application screen boxClick
You will be prompted with SMS composing screen as soon as the receiver's phone number and SMS are entered.
You can add or edit SMS and receiver's phone number. c Click Deleting SMS from Drafts box a Click b Select the SMS to delete from the list of from SMS application screen drafts boxClick
"(Delete)" and " (Delete all)" menu is displayed.
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click 60 L-05A Connection Software Replying and Forwarding SMS from FOMA Card SMS Box a Click b Select the SMS to reply/forward from the list from SMS application screen of FOMA card SMS boxClick
"(Reply)""(Forward)" menu is displayed. Deleting SMS from FOMA Card SMS box a Click b Select the SMS to delete from the list of from SMS application screen FOMA card SMS boxClick
"(Delete)""(Delete all)" menu is displayed.
"(Reply)"
You will be prompted with SMS composing screen as soon as the receiptor's phone number and SMS are entered.
"(Forward)" The SMS to be sent will be automatically entered, and move to SMS composing screen. The receiver's phone number is required to enter. c Click
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click L-05A Connection Software 61 Saving SMS in FOMA Card SMS Box to PC a Click from SMS application screen b Select the SMS to save from the list of FOMA card SMS boxRight click c Click "(Save to PC)"
d Click 62 L-05A Connection Software Sending SMS from Phonebook a Select the phonebook record to send b Click from the phonebook application
Receiver's phone number is automatically entered and move to the SMS composing screen. c Click d Click Note
Refert to "SMS (Composing SMS)" to enter the SMS.P54 Sending SMS from Japan to Overseas SMS
You can use the same mobile phone number overseas as is
used in Japan. If receiptor's terminal is FOMA terminal Enter "+", and
"country code", in front of receiptor's phone number, if receiptor is subscribed to overseas carrier other than NTT DOCOMO. Also, enter the "010" "Country code" "Receiptor's mobile phone number" in order. (If receiptor's phone number starts with "0", enter the phone number without "0"
If the receiptor received unsupported characters of SMS from the sender who subscribed to other overseas carrier, the message may not be displayed properly. Using Phonebook Click allows you to use various features of phonebook. The list of stored phonebook records are displayed when Phonebook records are stored in FOMA card.
Total number of phonebook records to be stored may be different depending on PC's available hard disk space. Total number of phonebook records stored in FOMA card is maximum 50.
:Phonebook record stored in FOMA card
:Phone number stored in PC
:Composing SMS
:Adding and deleting new group
:Transferring group
:New record
:Editing record
:Delete L-05A Connection Software 63 Adding Phonebook Record
Follow the steps to add new phonebook record from the Phonebook application a Click b Start the following operations Select a group Enter the name to be added Enter the phonebook to be added Searching Phonebook Record a Enter the name to be searched
You can search phonebook record by entering phone number. b Click Editing Phonebook Record a Select the phonebook record to be edited
You can enter Kanji, Hiragana, Katakana, English, number, character. (Full-width 10 character. Half-width 21character). You can enter the 20 character length. c Click
Save entered information to phonebook. Not save entered information to phonebook. d Click 64 L-05A Connection Software b Click from the phonebook application
Edit phonebook record number if editing screen appears. c Click
Save entered information to phonebook. Not save entered information to phonebook. d Click Deleting Phonebook Record a Select phonebook record to delete b Click from the phonebook application Adding New Group a Click b Enter the group name to be added from the phonebook application
You can enter Kanji, Hiragana, Katakana, English, number, character. (Full-width 20character , Half-width 20character). Delete phonebook record. Cancel deleting phonebook record.
Note
If you have many phonebook record to delete, multi-select phonebook records by using shift or Ctrl keys from key board and then click delete button to delete the selected phonebook record. c Click d Click L-05A Connection Software 65 from the phonebook application Deleting Group Name a Click b Select the group name to be deleted c Click d Click Note
"(Default)" group and "FOMA (FOMA card)"
group can not be deleted. Phonebook Record Transfering Other Group a Select the phonebook record to be transferred b Click from the phonebook application c Select the group name to be transferred d Click
Transfer the selected phonebook record to the group you want to transfer to. Note
If selecting two or more record, select records by using Shift or Ctrl keys and then click "(Transfer)" to collectively transfer. 66 L-05A Connection Software Using Application Option Click option by clicking from the main application screen. allows you to use various features of application Amount of downloaded data Internet option FOMA card Connection configuration FOMA terminal reset Network setup The following s are required to connect Internet with L-05A connection software. a The setting of provider information Register APN with other registration number (<cid>) on
"(Connection type configuration)" screen.
(P72) b Basic setting Configure "*99***<cid>#" as a dial number during packet communication on "Basic setting (Internet Option)"
screen. Also configure "User name", "Passward" provided by provider if required. Based on the above preparations, the APN with registration number entered in <cid> will be connected to. Confirming Packet Communication Volume
Confirms that the amount of data transmission used in packet communication a Click from the application option screen.
(Total usage) 1 (Monthly usage)
(Current usage)
(Total usage) Accumulated total data usage Initialize total usage to zero 1(Monthly usage) Monthly usage Initialize monthly usage to zero data usage of current session Note
The data usage displayed on the screen may differ from the actual volume of packet communication. Configuring Internet Option
Allows you to configure basic settingsfor connecting to Internet. from the application option screen a Click b Start the following operations
(ID)
(Password)
(Service number)
(Configuration) SMS
(SMS center number)
(Configuration)
(Basic setting reset) L-05A Connection Software 67
(ID) ID supplied from service provider
(Password) The password supplied from service provider
(Service number) number of service provider For packet communication, enter *99***<cid>. Enter the registration number of APN set in <cid>(P72). SMS(SMS center number) Normally, change in setting is not necessary. Enter SMS center number when using SMS from the network operator other than DOCOMO.
(Configuration) Click to change setting
(Basic setting reset) Click to return to basic setting c Click the applicable Note Configuring FOMA Card
Allows you to configure "PIN1(PIN1 lock)", "PIN1
(PIN1 unblocking)", "PIN1 (PIN1code change)"
a Click from the application option PIN1
(PIN1 Mode) PIN1
Click
"(Configuration)" to renew the setting. Always remember to click when setting is changed.
You will not connect to Internet if ID, password and service number are incorrect.
SMS may not be sent or received when SMS service
number has been improperly entered. In Macintosh, input any character in user name and passward. 68 L-05A Connection Software Locking PIN1
Set security to FOMA card. a Select "PIN1(PIN1 locking)" from PIN1 mode b Enter the PIN1 code configured in FOMA card to "PIN1"
Unblocking PIN1 a Select "PIN1(Unblocking PIN1)" from PIN mode b Enter the PIN1 code configured in FOMA card to "PIN1"
c Click d Click Note
When starting L-05A connection software with PIN1 locked, you need to enter PIN1 code from the screen of entering PIN1 code.You can not use FOMA terminal properly unless you enter correct PIN1 code. c Click d Click Note
If PIN1 unblocking code is set, you can use FOMA card information from FOMA terminal without verifying PIN1 code. L-05A Connection Software 69 d Enter the PIN1 code entered in "PIN1
(New PIN1code)" code in "
(Confirming New PIN 1code)"again to verify e Click f Click Modifying PIN1 Code
Set the password required when unlocking or locking PIN1.
Changing PIN1 code is only available when PIN is locked. a Select "PIN1(Changing password of PIN1)" from PIN1 mode PIN1 (PIN1 Mode) PIN1 (PIN1 Code) PIN1
(Current PIN1 Code) PIN1
(PIN1 Code to change) PIN1
(Confirming PIN1 Code to change) b Enter the FOMA card PIN1 code to "PIN1"
c Enter the PIN1 code change in "PIN1
(New PIN1 code)"
70 L-05A Connection Software Entering PIN1 Code
When L-05A connection software is started after setting PIN1 Lock, PIN1 code input screen will appear or it is restart to reset FOMA terminal.
a Enter PIN1code Enter the 4 to 8 PIN1 code Ex.3 When PIN1 code has been improperly entered 3 times in a row. If you improperly enter the PIN1 code 3 times in a row, the verification screen for unblocking PIN1 code will be displayed. Unblocking locked PIN1 code a Enter the unblocking PIN1 code to "PIN1
(Unblock)"
code)" to change b Enter the PIN1 code to "PIN1(New PIN1 c Enter the PIN1 entered in "PIN1(New PIN1 code)" in "(confirming New PIN1 code)" to confirm d Click b Verify the result after entering PIN1 code Ex.1 When PIN1 code has been successfully entered. Ex.2 When PIN1 code has been improperly entered. L-05A Connection Software 71 Caution
Be careful not to lose FOMA card. DOCOMO is not responsible for the lost or stolen device.
Do not transfer FOMA card to others.
Treat it carefully as the data stored in FOMA card can be easily damaged from scratching or bending.
When connecting FOMA terminal to a PC for the first time,
you are required to enter PIN1 code to use FOMA card. If an incorrect PIN1 code is entered 3 times in a row, the service will be suspended. To use it again, you must enter unblocking PIN1 code. If an incorrect unblocking PIN1 code is entered 10 times in a row, FOMA card locks automatically, so be sure to keep a separate note of the number. Contact a DOCOMO shop if you are not able to unblock the locked PIN 1. Configuring Connection type (PDP Type)
Configure connection type. from Internet Option screen a Click b Start the following operations a
(Registration number (cid)) b (Connection type) c
(Access Point Name (APN)) d
(Connection type registration) e
(Connection type setting reset) a (Registration Number(cid)) The registration numbers are available from cid1 to cid 10 in FOMA terminal. To connect to a provider other than mopera Uor mopera, you can set the access point name (APN) to any of cid2 or cid4 to cid10. b (Connection type) PDP type IP and PDP type PPP are available for Internet connection type. You can select the Internet connection type you want to use or check the currently configured internet connection type. 72 L-05A Connection Software c (Access Point Name (APN)) Configure APN for packet communication. You can configure APN of provider you want to use or check the currently configured APN. Connection type registration Save the modified information to FOMA terminal. Connection type setting reset d e Reset all PDP configurations. b Select the Internet connection type supporting Access Point. Saving and Editing the Provider Information
Save or edit the provider information you want to use. a Select cidSelect the registration number to save/edit cid The registration numbers are available from cid1 to cid 10 in FOMA terminal.
To connect to a provider other thanmopera Uor mopera, you can set the access point name (APN) to any of cid2 or cid4 to cid10. Registration numbercid 1 2 3 Access Point nameAPN mopera.ne.jpmopera Unassigned mopera.netmopera U 410 Unassigned c Enter APN
When "cid=3"selected "PDP type IP" Configure mopera.net This service provides a maximum data speed of 7.2Mbps for receiving and 5.7Mbps for sending.
When "cid=1" selected "PDP type PPP" onfigure mopera.ne.jp This service provides a maximum data speed of 384kbps for receiving and 384kbps for sending. L-05A Connection Software 73 Note Configuring sender ID You can configure to display sender ID or not by adding 186/184 before APN.
Add "186." before APN if you want to display sender ID.
Add "184." before APN if you don't want to display sender. Resetting FOMA Terminal
Allows you to reset FOMA terminal. a Click from the application option Registration Display sender ID Not display Sender ID APN 186.mopera.net 184.mopera.net d Click
Click FOMA
(FOMA terminal reset) Retrieving Provider Information aIf select the cid of the "(Registration Number(cid))" b"(connection type)" and c"
(Access Point Name (APN))"will be displayed. FOMA(FOMA terminal reset) Reset FOMA terminal for the following cases
When FOMA terminal is operating improperly.
When FOMA card is reinserted while inserting the FOMA terminal to a PC. 74 L-05A Connection Software b Click
FOMA terminal is restarting. L-05A Connection Software 75 DOCOMO Connection Manager DOCOMO Connection Manager Windows Version Macintosh Version 78 79 83 77 This manual introduces the installation method of DOCOMO connection manager. For connecting the terminal with Internet, agreement with the Internet service provider (mopera U etc.) supporting service and data communication is required. View DOCOMO web site for detailed information (Japanese only). Note Using a flat-rate data plan
For using a flat-rate data plan, the agreement with the charge plan corresponding to the flat-rate data communication and internet service provider is required. View DOCOMO web site for further information. Using measured-rate data communication
Note that the communication fees may come high if you perform heavy packet communications such as viewing home page with pictures inside, downloading data (Ex. Application/Music/Data/OS/anti-virus software update) etc. Note that when performing data communication after connecting this FOMA terminal with a PC by a USB cable,
(Pake-hodai) (Pake-
hodaifull)Biz (Biz-hodai) andBiz
(Biz-hodai double) are not included in the FOMA packet Flat-rate service. Using mopera
For connection configuration, view mopera web site. http://www.mopera.net/mopera/support/index.html
(Japanese only) DOCOMO Connection Manager DOCOMO connection manager is a software packets the necessary connection software to operate "
(Flat-rate data plan connection software)" and measured data communication which are necessary when using flat-rate data plan. DOCOMO connection manageris a software to connect data communication terminal by data communication correponding terminal. Subscribing mopera Uor configuring a PC operates easily. Also, confirming amount of data communication and charges through charge counter feature is available. Charge counter Windows version Macintosh version Connect/disconnect 78 DOCOMO Connection Manager Windows Version Before Installing DOCOMO Connection Manager Setting Internet Explorer Before installing this software, set connection setting to
" (Do not dial)" in Internet Option of Internet Explorer. Note Use other connection software besides DOCOMO connection manager This software has equate features with the following software. Therefore, it is not necessary to use the following software at the same time. If required, change the setting to not start or uninstall.
- mopera U start up tools
- mopera U connection & setting tool
- FOMA PC configuration software
- FOMA byte counter Also, when using Mzone (Public Wireless LAN Connection) in this software, uninstall the following public wireless LAN connection software. When the following software are installed at the same time, the Mzone connection of this software is not available.
- U Public Wireless LAN Utility Software
- DOCOMO Public Wireless LAN Utility Software
- DOCOMO Public Wireless LAN Utility Program a Start Internet ExplorerSelect " (Tool)""
(Internet Option)"
b Select " (Connection)" tabSelect " (Do not dial)"
c Click "OK"
DOCOMO Connection Manager 79 For Windows Vista a Log on by DOCOMO connection manager user An administrator is required. When logged on by other people than the administrator, entering user name and password will be asked. For Windows XP/2000 The user belongs to administrators group or the user of " (Administrator of computer)"
operates log-on. b Exiting all the applications launched Besides anti-virus software, programs resident in Windows are also finished.
Ex: Right click the icon shown on task bar, and select "
(Close)" or " (Finish)". Installing DOCOMO Connection Manager a Launch the installer of DOCOMO connection manager using the included CD-ROM Select "CD-ROM (the included CD-ROM)" "Windows"
"dcm_connect_manager""dcm_connect_full_setup.exe"
Note
When Windows XP does not contain MSXML6 and Wireless LAN API, installation is required before installing DOCOMO connection manager. Press "Install" when the confirmation screen is displayed.
After finishing installing MSXML6 and Wireless LAN API, if reboot Windows, the installation of DOCOMO connection manager starts automatically. b Click " (Continue)"
For Windows XP/2000, " (User account control)" screen is not displayed. Setup program starts right away. 80 DOCOMO Connection Manager c Click " (Next)"
e Confirm the content of the license agreement. When agree with the content, select "
(I agree with the license agreement stipulations)" and click "
(Next)"
d Make sure to confirm the caution and then click " (Next)"
f Confirm the destination folder and click "
(Next)"
DOCOMO Connection Manager 81 g Click " (Install)"
Installing starts. h Click " (Finish)"
Installing finishes. Launching DOCOMO Connection Manager a
" (Start)""(All programs)""NTT DOCOMO""
(DOCOMO connection manager)""
(DOCOMO connection manager)"
DOCOMO connection manager starts. b For the first launching, the wizard setting is displayed automatically. The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual).pdf for detailed information. 82 DOCOMO Connection Manager Note
Just exiting the Internet browser or mail software does not disconnect the connection. When do not use communication, make sure to press "
(Disconnect)" button to disconnect the connection. For OS update, if auto update is set, the software will be updated automatically. Note that the packet communication fee may come high. Macintosh Version Installing DOCOMO Connection Manager Note
Use Ver. 1.00.0003 or later for "DOCOMO connection manager for Mac". a Launch the installer of DOCOMO connection manager from the included CD-ROM
Select "CD-ROM (included CD-ROM)" "Mac"
"dcm_connect_manager" "dcm_for_Mac" "
(Install)" Select "
(Install DOCOMO connection manager)" and click
"OK"
Disconnect DOCOMO Connection Manager 83 b Click " (Continue)"
d Click " (Continue)"
c Make sure to confirm " (Important information)", and click " (Continue)"
84 DOCOMO Connection Manager e Confirm " (The license agreement)", when agree with the content, click " (I Agree)"Click "
(Continue)"
f Confirming the destination folder to install and click " (Install)"
g Enter administrator name and passwordClick "OK"
The user account created after Mac OS X is set becomes the administrator of PC. Enter the used name and password. DOCOMO Connection Manager 85 h Click " (Continue installing)"
Note
If click " (Log out)", setting assistant screen is displayed. The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual) for detailed information. i Click " (Log out)"
Installing finishes. 86 DOCOMO Connection Manager Note
Just exiting the Internet browser or mail software does not disconnect the connection. When do not use communication, make sure to press "
(Disconnect)" button to disconnect the connection. For OS update, if auto update is set, the software will be updated automatically. Note that the packet communication fee may come high. Launching DOCOMO Connection Manager a
" (Application)" "
(DOCOMO connection manager)" "
(DOCOMO connection manager)"
DOCOMO connection manager starts. b For the first launching, the wizard setting is displayed automatically The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual.pdf) for detailed information. Disconnect DOCOMO Connection Manager 87 Configuring Network Manually Configuring a Dial-up Network Manually 90 Communicating (Connecting by Dial-up) 109 89 For Windows XP a Connect the FOMA terminal with a PC
Connecting methodP24 b Click "(Start)" "
(All programs)" " (Accessories)"
"(Communication)" "
(Hyper Terminal)"
Hyper Terminal starts. For Windows 2000 Click "(Start)" " (Programs)" "
(Accessories)" "(Communication)" "
(Hyper Terminal)". c Enter a connection name in the " (Name)"
field Click "OK"
Configuring a Dial-up Network Manually This section describes the steps to configure settings for packet communication without using L-05A connection software or DOCOMO connection manager. Setting APN Set the access point (APN) in packet communication. Up to 10 APN can be set up and they are managed with cid's. Communication software is required to enter AT commands. This section describes the steps necessary for using the "(Hyper Terminal)" that comes with Windows.
The registration number (cid) 1 is set to mopera.ne.jp and the registration number 3 is set to mopera.net by default. Use cid 2 or from 4 to 10 when setting another access point.
"(Hyper Terminal)" does not come with Windows Vista. To configure the settings in Windows Vista, use communication software compatible with Windows Vista. For the setting procedures, refer to the instruction manual and other documentation that came with the software to be used. For a connection (APN) other than mopera U or mopera
, contact your ISP or network administrator.
90 Configuring Network Manually d Enter a non-existing phone number (such as
"0") in the "(Phone Number)" field Check that "FOMA L05A" is displayed for "
(Connection Method)" Click "OK"
If more than one modem name are displayed in the "
(Connection Method)" field, check the FOMA terminal modem name and select the proper one.P40 o e Click "(Cancel)" on the connection screen The Hyper Termina screen opens. f Enter the APN in the following formatPress Enter AT+CGDCONT=<cid>,"<PDP type>","<APN>"
Enter the following information in the corresponding <cid>,
<PDP type> and <APN> sections. If "OK" appears after you enter the information, the APN has been setup. cid Enter any number from 2, and from 4 to 10. Keep in mind that the old setting information will be overwritten if you select a cid number which has already been set. PDP type Select either PPP or IP for the connection method supported by the access point, and then enter the information enclosed in quotation marks (""). APN Enter the connection (APN) enclose it in quotation marks " ".
If the entered characters do not appear, enter ATE1. If register an access point with PPP in the PDP type and XXX.com in the APN of cid2 To reset the specified APN settings Enter AT+CGDCONT=<cid>
To view the registered APN Enter AT+CGDCONT Configuring Network Manually 91 g Check if "OK" is displayed h Click "(File)" "
(Exit Hyper Terminal)"
i Click "(Yes)" on the confirming disconnection screen Click "(No)" on the confirming to save screen Hyper Terminal will quit, and the setting of the APN completes. Note Configuring Dial-up Network Set up the dial-up network on the PC.
For setting up a connection to other than mopera U or mopera, contact your ISP or network administrator. Example: Connecting to the DOCOMO Internet connection service mopera U, which is registered to <cid>=3 For Windows Vista a Click
(Connection)"
"(Start)" "
b Click "
(Set up connection or network)"
The APN information is saved in the FOMA terminal. If you
connect a different FOMA terminal, save the APN information again. If you want to use the APN information registered on the PC, register the same APN in the same cid of the FOMA terminal. 92 Configuring Network Manually c Select "
(Set up dial-up connection)" Click "
(Next)"
d When the modem selection screen appears, click "FOMA L05A"
The modem selection screen opens only when the PC has more than one modem. Configuring Network Manually 93 f Click "(Skip)" on the "()...
(Connecting to (APN))" screen The connection test will not be performed. Only the settings will be checked.
If you do not click "(Skip)", the connection to the Internet will be established. e Configure various settings, then click "
(Connect)"
Enter the APN number in the "
(Phone number to a dial-up connection)".
Enter the user name and password specified by your ISP or network administrator in the "(User name)" and "
(Password)" fields.
You can leave the user name and password fields unfilled when connecting to mopera U/mopera.
Enter a connection name in the " (Connection Name)"
field. 94 Configuring Network Manually g Click "(Set up the connection)" "(Close)"
j Check the settings on the "(General)" tab window If two or more modems are connected to a PC, enable only "
- FOMA L05A (Modem - FOMA L05A)" in the "
(Connection Method)" field.
Disable "(Use dialing information)". h Click
(Connection)"
"(Start)" "
i Select the created dial-up connection icon Right click " (Properties)"
Configuring Network Manually 95 k Click "(Networking)" tab Configure each setting Place a checkmark next to the "
4 (TCP/IPv4) (Internet Protocol 4 (TCP/IPv4))"
checkbox in the "(This connection uses the following items)" field. Obtain the settings for "QoS(QoS Packet Scheduler)" from your ISP or network administrator.
To set up TCP/IP, click " (Properties)". Contact your ISP or network administrator for setting up. l Click the "(Option)" tab Click
"PPP(PPP Settings)"
m Remove checkmarks from all items Click
"OK"
n On the "(Option)" tab window, click
"OK"
96 Configuring Network Manually c Select "(Connect to the Internet)" Click "(Next)"
For Windows XP a Click "(Start)" "
(All programs)" " (Accessories)"
"(Communication)" "
(New Connection Wizard)"
b On the New connection wizard screen, click "
(Next)"
d Select "(Set up the connection manually)" Click "
(Next)"
Configuring Network Manually 97 e Select "
(Use a dial-up modem to connect)" Click "
(Next)"
g Enter a name in the "ISP(ISP Name)"field Click "(Next)"
f If "(Select a device)" screen appears, check in " - FOMA L05A
(COM4) (Modem - FOMA L05A(COM4))"
checkbox Click "(Next)"
The "(Select a device)" screen appears only when the PC has more than one modem. h Enter the APN phone number in the "
(Phone Number)" field Click " (Next)"
98 Configuring Network Manually For packet communication Enter "*99***<cid>#". Enter the registered number of APN in <cid>. (P73) i Select the connection usage range Click "
(Next)"
Select a user.
Depending on the PC settings, this screen may not appear. k Click "(Finish)"
The new connection wizard appears. j Fill in the "(User Name)", "
(Password)", and "
(Confirm password)" fields Click "
(Next)"
Enter the information provided by your ISP or network administrator.
Enter "(User name)" and " (Password)"
correctly according to the instruction from the provider. Pay attention to the capital characters.
To connect to mopera U or mopera, these fields can be left unfilled. l Click "(Start)" "
(All programs)" "(Accessories)"
"(Communication)" "
(Network Connection)"
Configuring Network Manually 99 n Check the settings on the "(General)" tab window
If more than one modem is connected to a PC, enable only
" - FOMA L05A (COM4) (Modem - FOMA L05A
(COM4))" in the " (Connection Method)" field.
Disable "(Use dialing information)". m Select the created dial-up connection icon Right click Click "(Properties)"
100 Configuring Network Manually o Click the "(Networking)"
tabConfirm each itemClick "
(Settings)"
Select "PPP:Windows 95/98/NT4/2000, Internet" in the "
(Dial-up server type to call)" field
Enable "(Internet Protocol) (TCP/
IP)" in the "(This connection uses the following items)" field. You cannot change the settings of "Qos (QoS Packet Scheduler)". Use it as usual.
When connecting to provider, to confirm the TCP/IP setting contact the provider or network administrator. q Remove checkmarks from all items Click
"OK"
r click "OK" on the "(Networking)"
tab window For Windows 2000 a Click "(Start)" "
(Programs)" "(Accessories)" "
(Communication)" "
(Network and Dialup Connections)"
b On the Network and Dial-up connection screen, double-click the"
(Create new connection)" icon p Click "(Settings)"
Configuring Network Manually 101 c If the location information screen appears, enter "(City code)" Click "OK"
This appears only when " (Create new connection)" is launched for the first time. Go to Step 5 when launching this for the second time or later. d On the phone and modem option screen, click
"OK"
e On the Network connection wizard screen, click "(Next)"
f Select "
(Connect to Internet via dial-up)" Click "
(Next)"
102 Configuring Network Manually g Select "
(LAN)
(Set up the Internet connection manually, or connect to the Internet using LAN)" Click "(Next)"
h Select "
(Connect to the Internet using a telephone line and a modem)" Click "
(Next)"
Configuring Network Manually 103 i If the modem selection screen opens, select
"FOMA L05A" Click " (Next)"
The modem selection screen opens only when the PC has more than one modem.
If "FOMA L05A" is not displayed, click "
(Select the modem used to connect to the Internet)" field and then select "FOMA L05A". j Enter the APN phone number in the "
(Phone Number)" field Click "
(Advanced settings)"
Do not enter anything in "(City code)" field
Disable "(Use the city code and dialing information)". Packet communication information Enter "*99***<cid>#". Enter registration number of APN in <cid>. 104 Configuring Network Manually k Configure the settings on the "
(Connection)" tab window according to the examples on the screen.
If you are connecting to other thanmopera U or mopera, fill in the " (Connection type)" and "
(Log on procedures)" fields according to the information provided by your ISP or network administrator. l Click the "(Address)" tabSet each itemClick "OK"
If you are connecting to other than mopera U or mopera, fill in the "IP (IP address)" and "ISP DNS ()
(Assign DNS address automatically by ISP)" fields according to the information provided by your ISP, and follow the instruction from provider. m On the "
(Internet account connection information)"
screen, click "(Next)"
Configuring Network Manually 105 n Enter "(User Name)" and "
(Password)" Click "(Next)"
Enter "(User name) and "(Password)"
correctly according to the instruction from the provider. Pay attention to the capital characters. Note
For mopera U or mopera, connection is operated even when "(User name)" field and "
(Password)" field are empty. The screen "
(Is it OK to enter nothing in User name?)" is displayed in this case. Click "(OK)" in each screen. 106 Configuring Network Manually o Enter a connection name in the "
(Connection Name)" field Click " (Next)"
q Click "(Finish)"
If "
(Select this to connect to the Internet now and click Finish)" appears, disable the option. p Select "(No)" Click "(Next)"
When setting Internet mail, select "(OK)". Contact the provider for detailed information of setting. r Select the created dial-up connection icon
Click "(File)" "
(Properties)"
Configuring Network Manually 107 s Check the settings on the "(General)" tab window
If more than one modem is connected to a PC, enable only
" - FOMA L05A (COM3) (Modem - FOMA L05A
(COM3))" in the " (Connection Method)" field
Disable "(Use dialing information)". 108 Configuring Network Manually t Click the "(Networking)"
tabConfirm each itemClick "
(Settings)"
Select "PPP:Windows 95/98/NT4/2000, Internet" in the "
(Dial-up server type to call)" field.
Enable only " (Internet protocol)
(TCP/IP)" in the "(Components)" field. u Click "(Settings)"
v Remove checkmarks from all items Click "OK"
w Click "OK" on the "(Networking)"
tab window b Enter "(User Name)" and "
(Password)" Click "(Dial)"
The APN will be connected.
To connect to mopera U or mopera , you can leave the " (User Name)" and "(Password)"
fields unfilled and click "(Dial)". If another ISP or dialup connection is selected, fill in the "(User Name)" and " (Password)" fields and click "
(Dial)".
You can save the user name and password or just the password to skip entering them next time.
Depending on the operating system, a connection completion screen may appear when the dial-up connection is established. However, the connection completion screen does not appear if you previously set the completion message not to appear. Communicating (Connecting by Dial-up) This section describes steps to start and terminate communication without using L-05A connection software or DOCOMO connection manager.
Check whether the FOMA terminal and the PC are connected properly before starting communication.P24
When performing communication, connect the FOMA terminal you used to configure the settings. If a different FOMA terminal is connected, L-05A Communication Configuration Files
(Drivers) may need to be reinstalled. For Windows Vista a Click
"(Start)" " (Connect to)" Select the access point that has been set up Click " (Connect)."
For Windows XP Click " (Start)" "(All programs)" " (Accessories)" "
(Communication)" "(Network connection)" Double click the APN that has been set up For Windows 2000 Click "(Start)" " (Programs)" "
(Accessories)" "(Communication)" "
(Network and Dialup Connections)" Double-click the APN icon that has been set up. Configuring Network Manually 109 c Click "(Disconnect)"
The communication will be terminated. Disconnecting Communication Exiting the Internet browser may not terminate the connection. Perform the following steps to terminate the connection securely. For Windows Vista a Click the PC A screen indicating the connection status appears. the dial-up icon in the task tray of b Click "(Connect or disconnect)"
For Window XP/2000 The above screen will not be displayed. Follow the next procedure. Note
The communication speed shown on the PC screen may be different from the actual communication speed. 110 Configuring Network Manually Overseas Use International Roaming Service (WORLD WING) 112 Services Available Overseas 112 Before Using Overseas 113 Setting the Searching Method for Available Networks 115 Configuring Network 116 111 International Roaming Service
(WORLD WING) WORLD WING is DOCOMO's international roaming service that provides telephone and other types of communication services overseas out of the service area of FOMA network, using affiliated overseas network.
The following 3 types of communication are included in overseas network. 3G network A third generation mobile communication network complying with 3GPP Global standards. (3rd Generation Partnership Project) The local satandardization organization established for the development of common technical specifications related to 3rd Generation Mobile Communication Systems
(IMT-2000) Services Available Overseas Available communication services may vary depending on the overseas carrier or network. Available Communication Services Service Description Data Communication Available for data communication using packets communication. Sending and receiving SMS may be available in overseas. Please understand that communication fee is counted when sending SMS. Packet communication is not available for GSM network communication type. GSM (Global System for Mobile Communication) network The second generation mobile communication network in a digital communication system that is most widely used around the world. GPRS (3General Packet Radio Service) network GPRS is the 2.5 generation mobile communication system that enables high speed packet communication using GSM. It is available to use 3G network or GSM/GPRS network service within service area. For countries/areas support 3G850MHz/
GSM850MHz, it is also available to use.
Before using the FOMA terminal overseas, refer to the followings.
- "Mobile Phone User's Guide [International Services]"
- DOCOMO "International Service Web site"
112 Overseas Use Note
For details on available communication services while using international roaming, refer to Mobile Phone User's Guide [International Services] or visit DOCOMO
"International Service Web site".
Voice call or video telephony features are not supported by L-05A. Before Using Overseas STEP1Before Leaving Japan STEP2While Overseas STEP3After Coming Back to Japan Before Leaving Japan Before using the FOMA terminal overseas, refer to the followings.
"Mobile Phone User's Guide [International Services]"
"Mobile Phone User's Guide [Network Services]"
DOCOMO "International Service Web site"
Subscription
If you subscribed to the FOMA service after September 1, 2005, no separate subscription is required to use WORLD WING. If you subscribed to the FOMA service on or before August 31, 2005 and have not subscribed to WORLD WING, a separate subscription is required to use it.
A FOMA card (green/White) made available for WORLD WING must be inserted in the FOMA terminal. Power source and voltage in the country or region of stay
Countries and regions may have different power sources, voltages or power outlet shapes. Check these in the instruction manual for your PC or web sites of the PC manufacturer in advance. Network setup
You can change network setup from overseas.P116 Internet access
For overseas access points or settings for using the Internet overseas, contact your Internet service provider.
If you subscribe to mopera U, visit the mopera U web site. http://www.mopera.net/ (Japanese only) While Overseas Switching networks Searching for and connecting to an access point are performed automatically by default. No special settings are required. Main screen display area The name of the connected carrier can be viewed in the display area of the Main screen.P116 Note
You can manually switch networks if you want to connect to a particular network. See procedure 3 of "
(Configuring Networks)" (P116) Inquries overseas If your FOMA card (green/white) is lost or stolen overseas, contact DOCOMO immediately and temporarily suspend your subscription. For inquiry information, see "docomo Information Center" on the back of this manual. Call or data communication charge will still on you after the terminal was lost or stolen. Overseas Use 113 Country Codes for Major Countries Area Code Area Code U.S.A U.K. Italy India Indonesia Egypt Australia Austria Netherlands Canada Korea Greece Singapore Switzerland Sweden Spain Thailand Taiwan Tahiti Czech China Germany Turkey Japan New Caledonia New Zealand Norway Hungary Fiji Philippines Finland France Brazil Vietnam Peru Belgium Hong Kong Macau Malaysia Maldives Russia 49 90 81 687 64 47 36 679 63 358 33 55 84 51 32 852 853 60 960 7 1 44 39 91 62 20 61 43 31 1 82 30 65 41 46 34 66 886 689 420 86 International Access Codes for Major Countries (Table 1) Area Code Area Code Ireland U.S.A. U.A.E. U.K. Italy India Indonesia Australia Netherlands Canada Korea Greece Singapore Switzerland Sweden Spain Thailand Taiwan Czech China Denmark Germany Turkey New Zealand Norway Hungary Philippines Finland France Brazil Vietnam Belgium Poland Portugal Hong Kong Macau Malaysia Monaco Luxembourg Russia 00 011 00 00 00 00 001 0011 00 011 001 00 001 00 00 00 001 002 00 00 00 00 00 00 00 00 00 00 00 0021 0014 00 00 00 00 001 00 00 00 00 810 For country code or detailed information, refer to "Mobile Phone User's Guide [International Services]" or DOCOMO
"International Service Web site". For codes of other countries or details, visit DOCOMO
"International Service Web site". 114 Overseas Use International Phone Codes for Universal Number(Table 2) Area Code Area Code Ireland U.S.A. Argentina U.K. Israel Italy Australia Austria Netherlands Canada Korea Colombia Singapore Switzerland Sweden Spain Thailand 00 011 00 00 014 00 0011 00 00 011 001 009 001 00 00 00 001 Taiwan China Denmark Germany New Zealand Norway Hungary Philippines Finland France Brazil Belgium Portugal Hong Kong Malaysia South Africa Luxembourg 00 00 00 00 00 00 00 00 990 00 0021 00 00 001 00 09 00 For codes of other countries or details, visit DOCOMO
"International Service Web site". After Coming Back to Japan After coming back to Japan, the FOMA network will be connected automatically. If connection can not be established Set to "(Auto)" from "(Search Network )" of "(Configuring network)"
(P116) Setting the Searching Method for Available Networks Switching Carriers Manually The FOMA terminal is set to automatically find and switch to an available network in the country of stay by default. However, if you have a preferred network in the area or network cannot be found automatically, you can set to a network manually. For details, see "Configuring Networks"
(P116). Overseas Use 115 c Searching network
(Auto) Network can be searched automatically.
(Manual) Connect to the listed networks manually. If network search mode is set to "manual" overseas, reset to "Auto" after coming back to Japan. d Specify if display or hide the network information
(Display) The name of the network receiving current service is displayed on the screen.
(Hide) The name of the network receiving current service is not displayed on the screen. e Click the applicable
The information entered will not be set without clicking the applicable f Click Configuring Network
Allow you to configure network by L-05A connection software. a Click from the application option screen
(Application)
(Prior network)
(Application)
(Network Search)
(Application)
(Network Information) b Specify a "(Prior network)"
(Network priority order selection setting) 116 Overseas Use Note
How to manually configure network
- Select "(Manual)"
- The available network list will be displayed after searching.
- Select one from the available networks.
- Click
Network is not displayed in FOMA area when even if
"display" is set in network information.
Connecting to Internet or sending SMS may not be able to operate properly when network setting is changed manually.
While using OverseaP111
- When you are in roaming area and set FOMA terminal to automatically find and you can have automatic roaming service. If network can not be found automatically, select the available network service manually.
- Some communication services may not available depending on the overseas carrier or network. Overseas Use 117 Appendix/Troubleshooting AT Commands 120 AT Command List 121 Troubleshooting 130 Error Messages 132 Warranty and After-Sales Service 134 Updating software 135 Main specifications 136 Export Controls of the Product and Accessories 137 Intellectual Property Rights 139 Index 141 119 AT Commands AT commands are used to check the FOMA terminal function settings or status by using a PC. Usually, the communication software issues AT commands so you do not need to be concerned about them. Use AT commands if you want to control the FOMA terminal in your own way. Form of AT Commands AT commands should be entered on the Terminal Mode screen of the communication software. Use only single-
byte alphanumeric characters.
<Example>
ATD 99 3#
Hard Return Parameter: Content Command Name
An AT command must be entered on a single line including parameters (numbers and symbols) following the command. On the Terminal Mode screen of the communication software,"one line" is from the first character to the character before
. Note
In the Terminal mode, a PC functions as a communication terminal. Characters entered from the keyboard are sent to a line connected to a communication port. 120 Appendix/Troubleshooting AT Command List The following AT commands can be used on the L-05Amodem port.
[&F]A command to initialize settings used as AT&F command.
[?][=?]The current settings appear when adding?at the end of the command, and the effective range of the current settings appears when adding=?at the end of the command.
Command Overview Parameters/Description Comments Examples AT&C<n>
AT&F<n>
Select the operating conditions of the circuit CD for DTE Reset the FOMA terminal AT command set values to factory defaults If executed during a communication, the line is disconnected. n=0: Always keeps CD singal ON n=1 (default): CD changes depending on the other party's modem status. AT&C1 OK Only n=0 can be set (Skippable)
AT+CGDCONT [?] [=?] Set APN when sending Packet AT+CGEQMIN [?] [=?]
AT+CGEQREQ [?] [=?]
AT+CGMR communication. Register criteria value for determining if QoS (Quality of Service) sent from network when PPP Packet communication is established, is acceptable or not. Set QoS(Quality of Service) to request for the network when PPP Packet communication is established. Display the version of the AT+CGMR FOMA terminal. Refer to P128 Refer to P128 Refer to P128 Refer to P128 Refer to P128 Refer to P128
AT+CGMR 1234567890123 456 OK Appendix/Troubleshooting 121 Command AT+CGREG=<n>
[&F]
Set whether to be notified of the network registration status. Overview Parameters/Description n n=0(default): Do not note. n=1: Notify when outside and inside the service area is changed. ExecuteAT+CGREG?
then appears as
+CGREG:<n>,<state>
state 0:Not registered 1:Registered Home Network 4: Unknown 5: Registered (while roaming)
n=0: DisplayERROR n=1: Display in the form of +CMEE ERROR: xxxx(where xxxx are numbers) n=2(default): Display in the form of
+CMEE ERROR: xxxx(where xxxx are text) If using ATZ or AT&F command to default, "0" is setup. Note that when connecting L-05A to power, the value of ATZ or AT&F command differs. Comments Examples AT+CGREG?
+CGREG: 0,1 OK AT+CGREG=?
+CGREG: (0-2) OK AT+CGSN 12345678901 2345 OK AT+CMEE=0 OK AT+CMEE?
+CMEE: 0 OK AT+CMEE=?
+CMEE: (0, 1, 2) OK AT+CGSN Display the serial number of the FOMA terminal. AT+CMEE=<n>
[&F]
Set the error report form of the FOMA terminal. 122 Appendix/Troubleshooting Command Overview Parameters/Description AT+ CNUM Display the own number of the FOMA terminal AT+COPS=
<mode>,<format>
,<oper>,<stat>
Select and set carrier's name/Plmn Number.
ExecutingAT+CNUMdisplays in the form of+CNUM: <number>, <type>
number: phone number type=129: Excluding the international access code+
type=145: Including the international access code+
<mode>
0Auto (Searching network automatically and then change communication service) 1Manualto connect <oper>
communication service) 2Disconnection communication service Not supported 3Mapping don't excute. 4Auto manualIn case, to disconnect
<oper>communication service that excute automatically Not supported Comments Examples AT+CNUM
+CNUM:, 09080189242
,129 OK AT+COPS?
+COPS: 0,0,,2 OK AT+COPS=?
+COPS:2,,
,44010,2, 3,,, 44020,2,, 0,1,2,3,4, 0,1,2 OK
<format>
2Fixed number
<oper> represents country code(MCC) plus network code(MNC). 44010is displayed for MCC=440 and MNC=10 Appendix/Troubleshooting 123 Command Overview Parameters/Description AT+CPAS
Display FOMA terminal state AT+CPIN=PIN/
AT+CPIN=PUK PIN
Command to enter the PIN code or unblocking PIN code for FOMA card. AT+CUSD
[&F]
Inquire the change or setting contents of Internet configuration related to the extra service. Displays in the form of+CPAS : <n>. n=0: Available to set AT commands. n=3: Available and receiving n=4: Available and receiving Enter the PIN1 code for PIN, and enter unblocking PIN code for PUK. ExecutingAT+CPIN?displays
+CPIN: <n>. n=READY: Authenticated n=SIM PIN: Waiting for entry n=SIM PUK: Waiting for unblocking PIN1 code entry n=ERROR: Locked Form : AT+CUSD=<n>,"<str>"[,0]
n=0 : middle result Do not send <m>[<str>,<dcs>]
(default) n=1 : middle result Send <m>[<str>,<dcs>]
Middle result :
m=0 : setting finishes m=1 : information requirement from network exists. str :09
<str>""
Comments Examples AT+CPAS
+CPAS:0 OK AT+CPAS=?
+CPAS :0,3,4 OK
(+CPIN:SIM PIN status) AT+CPIN=
1234 OK
(+CPIN:SIM PUK status) AT+CPIN=
12345678, 1234 OK AT+CUSD=0,
"xxxxxxxxx"
OK AT+CUSD=1,"
1481 0000#",0
+CUSD:0,"148 7#",0 OK AT+CUSD=?
+CUSD: 0 OK AT+CUSD=?
+CUSD:(0-2) OK 124 Appendix/Troubleshooting Command Overview Parameters/Description ATDANTE Display the signal strength (number of antenna bars) of the FOMA terminal. AT+GCAP Display the capability list of the FOMA terminal. AT+GMI Display the manufacturer of the FOMA terminal. AT+GMM Display the name of the FOMA terminal. AT+GMR Display the s/w version of the FOMA terminal. Result format:
DANTE:<m>
m=0 Out of the service area m=1 : State of 0 or 1 antenna bar displayed m=2 : State of 2 antenna bars displayed m=3 : State of 3 antenna bars displayed
Comments Examples ATDANTE DANTE:3 OK AT+GCAP
+GCAP:
+CGSM,+DS,+ES OK AT+GMI LG Electronics Inc. OK AT+GMM FOMA L05A OK AT+GMR L05A-01-Vxxx-
440-10 OK Appendix/Troubleshooting 125 Command Overview Parameters/Description AT+IFC=<n>,<m>
[&F]
Set the local flow control method between the PC and the FOMA terminal. n : DCE by DTE control n=0 : No flow control. n=1 : Perform XON/XOFF control. n=2 (default): Perform RS/CS (RTS/
CTS) flow control. m : DTE by DCE control. m=0 : Perform No flow control. m=1: XON/XOFF control. m=2(default) : Perform RS/CS (RTS/
CTS) flow control AT+WS46=<n>
[&F]
Set the wireless network to be used by the FOMA terminal when dialing. 12: GSM 22: 3G (WCDMA) 25: GSM+3G (WCDMA) A/
ATD ATE<n>
[&F]
ATI<n>
Retry a command just before performing Sending packet Set whether to echo back the text sent from a PC. Display the recognition code 126 Appendix/Troubleshooting is not needed after entering command. Sending packetATD*99***
cid#
cid110 +
Display the APN that configured
+CGDCONT n=0 : Not echo back. n=1default) : Echo back. n=0 : Display [NTT DOCOMO]
n=1 : Display the name of the FOMA terminalSame as +GMM n=2 : Display the FOMA terminal version same as +GMR n=3 : Display OK n=4 : Display the details of communication functions of the FOMA terminal. Comments Examples AT+IFC=2, 2 OK AT+IFC?
+IFC: 2,2 OK AT+WS46?
25 OK A/
OK ATD*99***3#
CONNECT 7200000 ATE1 OK ATIO NTT DoCoMo OK Command Overview Parameters/Description ATS3=<n>
[&F] [?]
ATS4=<n>
[&F] [?]
ATS5=<n>
[&F] [?]
ATV<n>
[&F]
ATZ Set the return character (CR) to recognize the end of AT command text string. Set the line feed (LF) character. It is positioned next to the return character
(CR) if displaying the result code in alphanumeric characters. Set the back space (BS) character to delete the last character in the input buffer while AT commands are entered. Set the display method of the result code. Reset the settings on the FOMA terminal with the nonvolatile memory contents. If performed during a communication, the line is disconnected. n=13default : only n=13 can be specified. Only n=10 (default) can be specified. Only n=8 (default) can be specified. n=0 :Display in numeric characters. n=1(default): Display in text.
Comments Examples ATS3=13 OK ATS4=10 OK ATS5=8 OK ATV1 OK ATZ OK Appendix/Troubleshooting 127 Supplementary Explanation of AT Commands Command name+CGDCONT
Overview Set APN when sending packet connection.
Form
+CGDCONT=[<cid>[,<PDP type>[,<APN>]]]
Parameter descriptions Set the destination (APN) when sending packets. See the following examples for command operations.
<cid>1110
<PDP type>2PPP or IP
<APN>3Optional 1 <cid> is the number used to control the destination
(APN) for the packet communication to be registered in FOMA terminal. 1 to 10 can be registered. The default value of <cid>=1 is mopera.ne.jp and <cid>=3 is mopera.net. Set cid to 2 or a number between 4 and 10. 2 <PDP type> is a protocol for packet communication. 3 <APN> is optional string that indicates each destination.
Command examples Command to register an APN with the name of abc
(When PDP type is PPP, cid is 3 AT+CGDCONT=2,IP,abc OK
Operations without a parameter AT+CGDCONT=
Clear all the settings of <cid>. However, the setting of <cid>=1 or <cid>=3 is reset to the value when purchasing. AT+CGDCONT?Display the current settings. 128 Appendix/Troubleshooting Command name: +CGEQMIN=[Parameter]
Overview Register the threshold to accept the QoS (Quality of Service) sent from the network when packet communication is established.
Format
+CGEQMIN=<cid>[,,<Maximum bitrateUL>[,<Maximum bitrate DL>]]]
Parameter description
<cid>1110
<Maximum bitrate UL>2None (default)
<Maximum bitrate DL>2None (default) 1 <cid> is a number used to manage the access point
(APN) for the packet communication registered in the FOMA terminal. 2 <Maximum bitrate UL> and <Maximum bitrate DL>indicate the minimum communication speed [kbps] of upload and download traffic respectively between the FOMA terminal and the base station. If these are set to None (default), all speeds are permissible. Be aware that a packet communication may not be established because any other speed than this is not permissible.
Command examples
(1) Command to permit all speeds for both upload and download (When cid=2) AT+CGEQMIN=2 OK
(2) Command to permit only 5,700kbps for upload and 7,232kbps for download (When cid=2) AT+CGEQMIN=2,,5700,7232 OK
(3) Command to permit 5,700kbps for upload and all speeds for download (When cid=2) AT+CGEQMIN=2,,5700 OK
(4) Command to permit all speeds for upload and only 7,232kbps for download (When cid=4) AT+CGEQMIN=4,,,7232 OK
Operations without a parameter AT+CGEQMIN=Reset all <cid> to their defaults. AT+CGEQMIN=<cid>Reset the specified <cid> to its default. Command name: +CGEQREQ=[Parameter]
Overview Set the QoS (Quality of Service) requested to the network when packet communication is dialed.
Format
+CGEQREQ=[<cid>[,,<Maximum bitrate UL>[,<Maximum bitrate DL>]]]
Parameter description
<cid>1110
<Maximum bitrate UL>2None (default)
<Maximum bitrate DL>2None (default) 1 <cid> is a number used to manage the access point
(APN) for the packet communication registered in the FOMA terminal. 2 <Maximum bitrate UL> and <Maximum bitrate DL>indicate the minimum communication speed [kbps] of upload and download traffic respectively between the FOMA terminal and the base station. If these are set to None (default), all speeds are permissible. Be aware that a packet communication may not be established because any other speed than this is not permissible.
Operations without a parameter AT+CGEQREQ=Reset all <cid> to their defaults AT+CGEQREQ=<cid>Set the specified <cid> as default. Note
This command, (+CGDCONT, +CGEQMIN, + CGEQREQ) is not reset by [&F] and [Z], either. Result Codes List of result codes Numeric display Text display Description 0 1 3 4 OK CONNECT NO CARRIER ERROR Operation performed properly Connected to other party Line disconnected Unable to accept command
Command example Command to require 5,700kbps for upload and 7,232kbps for download (When cid=2) AT+CGEQREQ=2,2,5700,7232 OK Appendix/Troubleshooting 129 Troubleshooting First, check whether software is required to update. Update software if necessary. (Updating SoftwareP135) Contact General Inquiries specified by DOCOMO located in
"Repairs" at the last page of the manual if the symptom is not improved after confirming the check box. The FOMA terminal is not recognized Symptom FOMA terminal is not recognized Check Reinsert the FOMA terminal all the way into the USB port securely. Verify the L-05A Communication Configuration Files (Drivers) for the FOMA terminal functioning properly.P35, P42 Communication may fail and the FOMA terminal cannot be properly recognized and functioned, if the PC is started up or restarted with the FOMA terminal FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. When connecting the FOMA terminal with a USB port, if data communication is not available without being recognzied, double click the "DOCOMO" icon recognized as a CD drive or start "L-05A connection software" or
"DOCOMO connection manager" to recognize the FOMA terminal as a modem. The FOMA card will not be able to use if PIN1 unlock code is wrongly entered 10 times in a low. For further information, visit DOCOMO shop. 130 Appendix/Troubleshooting Communication problems Symptom Communications are not possible Check Verify that signals are received in the service area. In the setting of Send Caller ID does not conform to the provider's instructions, communication may not be performed. P74, P90 Check if you set the FOMA Card Setting to PIN1 unblocking.P69 If set to (PIN1 Lock), launch the L-05A connection software, then change FOMA card setting to PIN1 unblocking.P71 Check the property settings of the modem and the registration of the destination (APN) Problems with AT Commands Symptom
[ERROR]
appears when a command is entered
[OK] does not appear after an AT command is entered. Check Verify that you entered a correct ATcommand. Check the properties of the terminal software to see whether a device other than the FOMA terminal is selected Check the L-05A Communication Configuration Files (Drivers) have been installed and functioned properly. Verify that the commands start with "AT" or
"at". Other problems Symptom The terminal stopped working suddenly The FOMA terminal is not detected if it is inserted into a USB port while installing the L-05A Communication Configuration Files (Drivers). Check Verify that the FOMA CARD is properly inserted to FOMA terminal.P19 Your PC operating environments may have changed because a new peripheral or software was installed. Make a confirmation with manufacturer or maker of accessory or software. Please confirm the followings.
Whether the PC or OS you are using is in the latest condition?
(If required, apply revision program of OS or a maker.)
Whether the FOMA terminal recognizes normally when other USB devices are inserted into the USB port?
Whether the FOMA terminal operates normally when being inserted into another PC?
Whether the FOMA terminal operates normally when being reset to its default?
For inquiries related to OS or PC, contact Microsoft or PC manufactures. Internet connection speed decreased significantly Inserting FOMA terminal directly to a PC may result in deterioration of performance depending on the type of PC, specification and degree of electromagnetic interference. Deterioration of performance may occur to the service areas where W-CDMA/HSDPA/
GSM network are unstable. In this case, move to other area and try to connect again. Appendix/Troubleshooting 131 Error Messages Error Messages
PINPIN FOMA FOMA FOMA PIN1 PIN1 blockedPIN1 PIN1/3 PIN1PIN1 0123456789 PIN148 Description You are out of service area or available network. You may be out of service area or available network, or network error. Please do network setting again. Communication may fail and the FOMA terminal cannot be properly recognized if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. Contact DOCOMO shop if the same problems persist. You cannot customize setting during data communication. Try again after closing data communication. Two of new PIN1 are not identical each other. New PIN1 you want to change is not matched to the PIN1 you entered for verification purpose. Enter correct PIN1. Make sure to insert FOMA card into FOMA terminal before inserting to a PC. Do not remove FOMA card while using FOMA terminal. Verify the FOMA terminal is properly inserted into a PC. Verify that the FOMA terminal is properly recognized by the PC. An incorrect PIN1wasimproperly entered 3 times in a row. Available functions will be limited. Enter PIN unblocking code to unlock. An incorrect PIN1 code has been entered. Enter the correct PIN1 code again You can use 0,1,2,3,4,5,6,7,8,9 as a valid PIN1 code. Others are invalid. Valid PIN1 code is from 4 to 8 digit. 132 Appendix/Troubleshooting Error Messages PIN1PIN PIN/
10 SMS PIN1 FOMA FOMAFOMA To change the PIN1, PIN must be locked. Switch PIN unblocking to PIN blocking. Description An incorrect PIN was imporperly entered 10 times in a row. Available functions will be limited. Please enter the contact unblocking PIN code You may be out of service or available network.You may encounter problems due to the network error. You are no longer able to use FOMA card that PIN unblocking code has been improperly entered10 times in a row. Please contact DOCOMO shop. Communication may fail and the FOMA terminal cannot be properly recognized, if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. When no data transmission has been incurred for a certain period of time. Communication will be resumed when data transmission is incurred, so stay as it is. Appendix/Troubleshooting 133 Replacement parts Basically, replacement parts (parts required to maintain product function) will be kept in stock for at least 4 years after termination of production. Please note that the product may not be repaired even during this period, depending on the malfunctioning parts due to a shortage of those parts. Depending on the nature of the required repairs, it may still be possible to repair your terminal even after this period. Contact Repairs listed on the back of this manual. Updating software Download the modification file of FOMA terminal from download site on the Internet and then update the software. If software update is necessary, you will be informed at the DOCOMO web site with "
Information". Pay attention Note
Do not modify the FOMA terminal, the FOMA card or its accessories.
- Fire, injury or damage may result.
- If the FOMA terminal is modified (part replacement, modification, painting, etc.), it will be repaired only after the modified parts have been restored to the condition at the time of purchase. However, repair may be refused depending on the nature of modification. Using sticker to decorate the FOMA terminal. Exchanging the packing with those other than DOCOMO product.
- Repair of failures or damage caused by modification are charged even during the warranty period.
Do not unplug the FOMA terminal with the computer during software update.
Software update (downloading and rewriting) may take a while. If software update fails, all operations become unavailable. In this case, bring your FOMA terminal to a DOCOMO service center.
Do not remove any inscription stickers attached to the FOMA terminal. The inscription stickers certify that the FOMA terminal satisfies specific technical standards. If stickers are removed intentionally or are reattached in such a way that confirmation of the sticker's contents is impossible, repair or servicing may be refused because confirmation of whether or not the device conforms to relevant technical standards cannot be made. Appendix/Troubleshooting 135 Power source Power voltage DC5V5%(Supplied from PC) Max Current consumption Max Current consumption while communicating 3G: Approx. 550mA or below GSM/GPRS: Approx. 300mA or below Average Current consumption while communicating 3G: Approx. 180mA or below GSM/GPRS: Approx. 170mA or below Average Current consumption while Standby:
3G: Approx. 90mA or below GSM/GPRS: Approx. 90mA or below Depending on the usage, power consumption fluctuates. Form factor USB connection type Dimensions Height: approx. 80mm Width: approx. 32mm Depth: approx. 13mm Weight Approx. 37g Main specifications Operation system Windows 2000 Professional Japanese version
(Service Pack 4 or later) Windows XP Home Edition Japanese version
(Service Pack 2 or later) Windows XP Professional Japanese version
(Service Pack 2 or later) Windows Vista 32 bit Japanese version (Service Pack1 or later) Windows Vista 64 bit Japanese version (Service Pack1 or later) Mac OS X 10.4.11 Japanese version Mac OS X 10.5.6 Japanese version Communication Speed Packet Communication:
Maximum receiving: 7.2MbpsBest effort Maximum sending: 5.7MbpsBest effort The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending is theoretical values and does not show the actual ones.The actual communication speed depends on communication environment and network congestion. Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps Operating environment Temperature535 Humidity45%85%
136 Appendix/Troubleshooting Export Controls of the Product and Accessories Japan Export Control Regulations (Foreign Exchange and Foreign Trade Law and relevant laws and regulations) and U.S. Reexport Regulations (Export Administration Regulations: EAR) apply to this product and its accessories. If you export or re-export this product or its accessories, please follow the necessary procedures at your own risk and expense. For details on the procedures, contact the Ministry of Economy, Trade and Industry or the U.S. Department of Commerce. European Union Directives Conformance Statement Hereby, LG Electronics, Inc. declares that this product is in compliance with:
The essential requirements and other relevant provisions of Directive 1999/5/EC
All other relevant EU Directives 0168 The above gives an example of a typical Product Approval Number. FCC Regulations Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Appendix/Troubleshooting 137 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:
This device & its accessories may not cause harmful interference.
This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This device has been tested for typical body-worn operations with the distance of 0.19inches (0.5cm) from the user's body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.19inches(0.5cm) must be maintained from the user's body. Consumer Information on SAR (Specific Absorption Rate) THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications 'Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the device transmitting at its highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 138 Appendix/Troubleshooting Before a device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., worn on the body) as required by the FCC for each model. The highest SAR value for this device when worn on the body is 1.17W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Gant section of http://
www.fcc.gov/ after searching on FCC ID BEJL05A. Additional information about Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. Intellectual Property Rights Copyrights and Rights of Portrait Without permission of the copyright owner you may not duplicate, modify, transmit over public communication lines, etc. any document, image, music, software, or other content owned by a third party that you have used this product to download from an Internet web site, etc., except for private uses such as duplication and indexing that are allowed by copyright law. Appendix/Troubleshooting 139
1 2 | Users Manual | Users Manual | 3.18 MiB | May 06 2009 |
Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:
(1) This device & its accessories may not cause harmful interference.
(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This Mobile Broadband USB Modem, model L-05A, is approved for use in normal size laptop computers only (typically with 12" or larger display screens). To comply with FCC RF exposure requirements, this modem should not be used in configurations that cannot maintain at least 5mm (approximately 0.2 inches) from users and bystanders, and 12mm (approximately 0.47 inches) from the top of the USB modem. This USB modem has been tested for compliance with FCC/IC RF exposure limits in the laptop computer(s) configurations with horizontal and vertical USB slots and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. When using this USB modem in your computer, it must not be co-located or simultaneously transmit with any other radio
(for example, Bluetooth or Wifi radios) in the computer. If the USB modem will be used with the mounting folder and extension cable combination, the modem must not be co-located or simultaneously transmit with any active antenna that may be located on your computer screen. DOCOMO W-CDMA GSM/GPRS System Thank You for Purchasing theData Commu-
nication Device L-05A Before or while using the L-05A, be sure to thoroughly read this manual and the individual manual for other operation devices to ensure its correct use. For further information, contact the "docomo Information Center" on the back of this manual. The L-05A is designed to be your close partner. Treat it carefully at all times to ensure longterm performance.
DOCOMO is not responsible for any economic losses incurred through lost communication opportunities caused by external factors such as malfunction or failure of the FOMA terminal, or electrical outage.
The FOMA terminal can be operated in FOMA Plus-Areas and FOMA HIGH-SPEED Areas.
The FOMA terminal can be used only via the FOMA network provided by DOCOMO and DOCOMO's roaming area.
This FOMA terminal does not support i-mode functions (i-mode mail, connection to official i-mode sites or i-ppli, etc.) For Those Who Use the FOMA Terminal for the First Time Before Using the FOMA Terminal Because the FOMA terminal uses radio waves, it may not function in locations where it is difficult for radio waves to penetrate, such as tunnels, underground passages and some buildings in areas where radio wave signals are weak or out of the service area. Even when you are on a higher floor of a tall building or condominium and nothing blocks your view outside, the FOMA terminal may not be able to receive or transmit signals. Also communication may be interrupted even when the Antenna Indication Lamp on the FOMA terminal lights green indicating a strong signal reception with 3 antenna indication bar.
Use the FOMA terminal in ways that do not disturb others in public places, crowded locations, or quiet locations.
The FOMA terminal communicates via radio waves by converting voices into digital signals. If you move into an area where signal reception is poor, the digital signals may not be accurately decoded and what you hear may differ slightly from what was actually said. If this is the first time for you to use the FOMA terminal, it is recommended that you read this manual in the following order to learn basic operations. 1. Learning the precautions. P7 2. Learning the names of parts and functions of the FOMA terminal. P18 3. Inserting the FOMA terminal into a PC . P24 4. Having the FOMA terminal recognized by your PC. P24 5. Setting up the FOMA terminal for communication. P66 The latest version of this manual can be downloaded from the DOCOMO web site. The URL of PDF for Instruction Manual http://www.nttdocomo.co.jp/english/support/manual/
index.html The URL and the information contained in the manual are subject to change without prior notice. How to Read/Refer to This Manual Contents L-05A Manual is composed ofL-05A Instruction ManualConnection Guideand L-05A INSTRUCTION MANUAL
(included CD-ROM)(this manual) recorded in CD-ROM. L-05A Instruction ManualConnection Guide The following contents such as connection to computer, troubleshooting methods, specifications of L-05A are written.
Contents/Precautions
Before Using the FOMA Terminal
Setting up
Appendix/Troubleshooting L-05A INSTRUCTION MANUAL (included CD-ROM)this manual Besides the above contents described inL-05A Instruction ManualConnection Guide, the contents of configuring communication through special application are also written. This manual is supplied with PDF. To view this manual, Adobe Reader (Version6.0 or later is recommended) is necessary.
L-05A Connection Software
DOCOMO Connection Manager
Configuring Network Manually
Overseas Use 1 How to Refer to This Manual This manual offers you the following methods to easily find a page describing functions or services you want to know about. See next page for detailed descriptions From the Index P141 Search from the index when you know the names of functions or services. From the Tabs on the Cover Front cover Search functions or services from the index tabs printed on the front cover. From the Contents Search from the contents that categorize functions. From the Main Features P5 P6 Search from the features when you want to use specific functions. Please understand thatL-05A Manual refers to theL-05Aas theFOMA Terminal. This manual describes, some steps and screens may differ depending on your operating environment. Reprinting all or parts of this manual is prohibited. Information contained in this manual is subject to change without prior notice. 2 A way to find a destination page is explained with an example of installing L-05A connection software on Windows
(including a driver). From the Index
P141 Search or a function name or a service name as shown below. From the Index Tabs on the Front Cover
Front cover Search for the function in the order of "Front cover"
"Chapter title page"
"Target page" as shown below. P35 The page describing installation of L-05A connection software on Windows
(including a driver)"
3 Displays a section title. Useful Information or suggestions relating to an operation. The above page is an example. Screen images and illustrations contained in this manual are for reference only. They may differ from those seen for the actual product. 4 Explains Operation steps A key screen for an operation step. This is an image of a screen seen on the PC. Numbers, settings or characters entered are for reference only. Index:
Searching each chapter is available. Contents How to Read/Refer to This Manual 1 Contents 5 Features of the L-05A 6 Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) 7 Handling and Care 12 Purchased Product and Accessories 15 Before Using the FOMA Terminal 17 Setting Up 31 L-05A Connection Software 49 DOCOMO Connection Manager 77 Names of Parts and Functions Using FOMA Card Available Communications Connecting FOMA Terminal with a PC Setting Up Windows version Macintosh version L-05A Connection Software Using Packet Communication Using SMS Using Phonebook Using Application Option DOCOMO Connection Manager Windows version Macintosh version Configuring Network Manually 89 Overseas Use 111 Appendix/
Trouble-
shooting 119 Configuring Dial-up Network Manually Conducting Communication
(Connecting Dial-up) International Roaming Service
(WORLD WING) Services Available Overseas Confirming before Using Overseas Setting the Searching Method for Available Networks Configuring Network AT Commands AT Command List Troubleshooting Error Messages Warranty and After-Sales Service Software update Main Specifications Export Controls of the Product and Accessories Intellectual Property Rights Index Contents/Precautions 5 FOMA (Freedom Of Mobile multimedia Access) is the name of a service provided by DOCOMO based on the W-CDMA system, which is certified as one of the global standards of 3rd generation mobile communication systems (IMT-2000). Features of the L-05A Correspondence with the FOMA HIGH-SPEED Area International Roaming Service You can enjoy high speed communication (Best effort systemat a maximum of 7.2Mbps for receiving and 5.7Mbps for sending.
The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending are theoretical values and they do not show the actual performance.
Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps.
The actual communication speed varies depending on surrounding communication conditions and network condition.
DOCOMO offers Internet connection services, such as mopera U. For details, visit the mopera U web site http://www.mopera.net/ (Japanese only) The packet communication in FOMA HIGHSPEED area, the amount of send/receive data is expected to increase. Note that the communication fees may become high. Communications are available from a PC even in foreign countries that have adapted the W-CDMA (3G) network system or GPRS network.P112 If you subscribed to the FOMA service after September 1, 2005, a separate subscription is not required. However, if you unsubscribed to the FOMA service subscription or canceled the service, a separate subscription is required. If you initially subscribed to the FOMA service before August 31, 2005, and have not subscribed to "WORLD WING", a separate subscription is required. This service is not available with some billing plans. FOMA Card Interchangeability The same FOMA card can be used in more than one FOMA terminal.P19 SMS Feature Allows you to send and receive SMS by using L-05A Connection Software P54 6 Contents/Precautions The following symbols indicate special warnings regarding product usage. Denotes things not to do (prohibition). Not disassembly Not liquids Denotes not to disassemble. Denotes not to use where it could get wet. Denotes mandatory instructions
(matters that must be complied with).
"Safety Precautions" are explained in the following 4 sections. General Precautions for the FOMA Terminal and FOMA Card 8 Precautions for the FOMA Terminal 9 Precautions for the FOMA Card 10 Notes on Using near Electronic Medical Equipment 11 Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) Before using your FOMA terminal, read these Safety Precautionscarefully so that you can use it properly. After reading the safety precautions, keep this manual in a safe place for later reference. These precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property. The signs below indicate the levels of danger or damage that may occur if the particular precautions are not observed . DANGER WARNING CAUTION This sign indicates that incorrect handling has a high possibility of causing death or serious injury. This sign indicates that incorrect handling poses a risk of causing death or serious injury. This sign indicates that incorrect handling poses a risk of causing injury or damage to the product or property. Contents/Precautions 7 General Precautions for the FOMA Terminal and FOMA Card Do not use or leave the FOMA terminal and FOMA card in places with a high temperature such as in cars under the blazing sun. Deformation, malfunction heating or the deterioration of performance may result. Also, part of the case could get heated, causing bare skin burns. Not disassembly Not liquids Do not disassemble Disassemble, remodel or solder the terminal and FOMA card. Fire, injury, electric shock or malfunction may result. Do not let FOMA terminal and FOMA card get wet. Contact with water or other liquids may cause heating, electric shock, fire, malfunction or injury. Take care not to use the terminal and FOMA card in areas where they could get wet. WARNING Do not put the FOMA terminal or FOMA card in microwave ovens or other heating. The FOMA terminal may over heat, smoke or catch fire, or its circuit parts may burst. Do not throw the FOMA terminal or FOMA card, or subject them to severe shocks. Malfunction or fire may result. Be careful not to let electro conductive materials (metal pieces, pencil leads etc.) contact with the connector terminal. Also, make sure that these are not entered into the inside of the FOMA terminal. Fire or other malfunctions may result from a short circuit. Make sure you have the power of the computer which is connected with FOMA terminal switched off before you go near a flammable gas such as gasoline fumes. Using the terminal in such an environment may result in a fire. 8 Contents/Precautions CAUTION Do not place the FOMA terminal or FOMA card on unstable locations such as wobbly tables or slanted locations. The FOMA terminal or FOMA card may fall, resulting in injury or malfunction. Do not store the FOMA terminal or FOMA card in humid or dusty places, or in hot areas. Malfunction may result. If children use the FOMA terminal or FOMA card, a guardian should explain the precautions and correct operations. The guardian should also make sure that the instructions are followed during use. Injury may result. Keep out of reach of babies and infants. Accidental swallowing or injury may result. Precautions for the FOMA Terminal WARNING Do not put the FOMA terminal in the place where it could be affected by an expanded airbag, e.g. on the dashboard. If the airbag expands, the FOMA terminal could hit you and others, causing accidents such as injury and the FOMA terminal could get malfunction or damaged. Do not place the terminal in breast or inner pocket when electronic medical equipment is near by. Using FOMA terminal closed to electronic medical equipment may result malfunction. Do not allow liquids such as water, or foreign materials such as metal pieces or flammable materials to get into the FOMA card opening in the FOMA terminal. Fire, electronic shock or malfunction may result. Contents/Precautions 9 Turn off the FOMA terminal in places where use is prohibited such as airplanes or hospitals. Electronic and electronic medical appliances may be adversely affected. For use inside medical facilities, make sure that you comply with their regulations. Remove FOMA terminal from the USB port in places near high-precision electronic devices or devices using weak electronic signals. The FOMA terminal may possibly cause these devices to malfunction. Electronic devices that may be affected Hearing aids, implanted cardiac pacemakers, implanted defibrillators, other medical electronic devices, fire alarms, automatic doors and other automatically controlled devices. If you are using an implanted cardiac pace maker, implanted defibrillator or any other electronic medical device, consult the manufacturer or retailer of the device for advice regarding possible effects from radio waves. CAUTION Electronic devices in some types of cars can be affected by use of the FOMA terminal. For safety's sake, do not use the FOMA terminal inside such cars. Itching, rash or eczema may be caused depending on your physical conditions or predisposition. If an abnormality occurs, stop using the FOMA terminal immediately, and then seek medical attention. Metal(chrome plating) is used to the following parts. Parts that are used: USB connector Precautions for the FOMA Card CAUTION Be careful when removing the FOMA card(IC portion). Your hands or fingers may be injured. 10 Contents/Precautions Notes on Using near Electronic Medical Equipment The description below meets Guideline on the Use of Radio-communication Equipment such as Cellular Telephones - Safeguards for Electronic Medical Equipment by the Electromagnetic Compatibility Conference. WARNING Be sure to adhere to the following regulations inside medical facilities. Keep the FOMA terminal out of operating rooms, intensive care units (ICUs) or coronary care units (CCUs). Turn off the PC in hospital wards. Turn off the PC in hospital lobbies and corridors if electrical medical devices could be nearby. If the medical facility has specific zones where use or possession of mobile terminals is prohibited, follow those regulations. If the function which automatically turns on the power is set, cancel the setting before turning off your PC. Turn off the PC in crowded trains or other public places where implanted cardiac pacemaker or defibrillator wearers could be nearby. Signals from the FOMA terminal may affect the operation of implanted cardiac pacemakers or defibrillators. If you use an implanted cardiac pacemaker or implanted defibrillator, use the mobile terminal 22cm or more away from the implanted cardiac pacemaker or implanted defibrillator. Operation of an implanted cardiac pacemaker or implanted defibrillator may be affected by radio waves. Patients using electronic medical equipment other than implanted cardiac pacemakers or implanted defibrillators
(using outside medical facilities for treatment at home, etc.) should check the influence of radio waves upon the equipment by consulting the manufacturer. Operation of electronic medical equipment may be affected by radio waves. Contents/Precautions 11 Handling and Care General Usage Guidelines Keep the FOMA terminal away from water. The FOMA terminal and FOMA card are not waterproof. Do not use the terminal in places with high humidity such as a bath or where rain may get it wet. If you carry the card close to your body, moisture from sweat may corrode the internal parts causing a malfunction. Note that malfunctions deemed to be caused by water are not covered by the warranty, and may be impossible to repair. Since these malfunctions are not under warranty, even when repair is possible, it will be done at the user's expense. Clean the FOMA terminal with a dry, soft cloth
(Lens cleaning cloth). If the FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing may disappear or color may fade. Keep the connector contacts clean with a dry, soft cloth. Dirty contacts can result in intermittent connections. Do not place the equipment near air conditioner outlets. Condensation may form due to rapid changes in temperature, and this may corrode internal parts and cause malfunction. Do not place the FOMA terminal where excessive force will be applied to it. If FOMA terminal is inserted to a full bag, or placed in a pocket and sat on, its internal PCBs may be damaged or malfunction. Such damage is not covered by warranty. Read the individual manual attached to the FOMA terminal. FOMA Terminal Avoid using in extremely high or low temperatures. The FOMA terminal should be used within a temperature range from 5 C to 35 C and a humidity range from 45 % to 85 %. FOMA terminal may affect fixed phones, televisions or radios in use nearby. Use as far as possible from such appliances. Keep a separate record of any information stored on the FOMA terminal and store the copies in a safe location. DOCOMO assumes no responsibility for the loss of any of your data. 12 Contents/Precautions Remove the FOMA terminal from the PC when transporting. Malfunction or damage may result. It is normal for the FOMA terminal to become warm during use. You can continue to use it even when it is warm. Take care not to drop the FOMA terminal when removing the FOMA terminal from the carrying case. When it is not in use, keep the FOMA terminal in its carrying case to keep the connector contacts clean. Dirty contacts may result in intermittent connections. When putting the FOMA terminal in carrying case, keep it away from wet or high temperature place. Pay attention not to put excessive force on the FOMA terminal. Transformation, tarnish, color staining may result. FOMA Card Do not put excessive force on the FOMA card when inserting or removing it into the FOMA terminal. It is normal for the FOMA card to become warm during use. You can continue to use it even when it is warm. Always keep the IC portion of the FOMA card clean. Clean the FOMA card with a soft, dry cloth (Lens cleaning cloth). Be sure to keep a separate note of the information registered to the FOMA terminal. DOCOMO is not responsible for any losses of registered information. Visit DOCOMO shop to return the FOMA card for the environmental purpose. Avoid extreme temperature. Do not scratch, touch carelessly or short circuit the IC portion. Data loss or malfunction may result. Do not drop or give shock to the FOMA card . Malfunction may result. Do not bend or put heavy things on the FOMA card. Malfunction may result. Do not insert UIM into the FOMA terminal with labels or stickers attached on. Contents/Precautions 13 CAUTION Do not use the modified FOMA terminal. Using modified FOMA terminal result in violating the law of Electromagnetic Compatibility. FOMA terminal has been complied with technical standard of wireless equipment stipulated by law of Electromagnetic Compatibility. As for the proof, the technical standard compliance mark, is indicated in the inscription seal. If FOMA terminal is modified by turning the screw to the left to disassemble, technical standard compliance becomes invalid. Please do not use FOMA terminal during the time when technical standard compliance is being invalid, since you are in violation of the law of Electromagnetic Compatibility. 14 Contents/Precautions Purchased Product and Accessories L-05A Terminal (With Rear Cover L13, Warranty) L-05A CD-ROM L-05A Instruction ManualConnection Guide Carrying Case (Sample)
L-05A Connection Software (For Windows/Macintosh
DOCOMO Connection Manager (For Windows/Macintosh
L-05A INSTRUCTION MANUALPDF Software specifications are subject to change without prior notice. USB Extension Cable (Sample) Use when "USB Extension Cable" is written in this manual. Mounting folder (Sample) Use when "A mounting Folder" is written in this manual. Contents/Precautions 15 Before Using the FOMA Terminal Names of Parts and Functions 18 Using a FOMA Card 19 Available Communications 23 Connecting FOMA Terminal to a PC 24 17 Names of Parts and Functions b c d a a USB ConnectorP25 Connection contacts to a PC. Pull out from the FOMA terminal and use. The tip part of the USB connector is able to turn 90 degree. However, only one direction is available to turn. b Antenna Part The antenna is inside the FOMA terminal. c PWR LampP19 Indicates the power supply conditions. d IDLE/BUSY LampP19 Indicates the FOMA terminal status. 18 Before Using the FOMA Terminal Examples of a Ex. 1:
Ex. 2:
Mode Indication Lamp Operation indicating lamp FOMA Terminal Status When powered on Waiting to connect to the FOMA network a b Using a FOMA Card The FOMA card is an IC card that stores personal information such as your phone number. Without a FOMA card installed in the FOMA terminal, you cannot use data communication. For detailed information, refer to FOMA Card Manual. Inserting/Removing Inserting aPower Indication Lamp bMode Indication Lamp
Green Green Inserting the UIM with two hands. a While pushing the cover in the direction of a, slide the rear cover in the direction of b. Lift the cover as shown by c. Packet communication SMS PIN Attempting to communicate Communicating While receiving Opening SMS Sending SMS PIN Lock Waiting to unlock PIN1 Green Green Green
(Flash) Green Green Green Green Blue
(Flash) Blue Green Green Green
a b c R Rear Cover Before Using the FOMA Terminal 19 b Insert the UIM into slot at the direction of arrow with the IC chip side down IC is faced FOMA card Notch FOMA card slot c Fit the rear cover to the ditch of FOMA terminal at approximately 3mm from the top tip of the FOMA terminal. While pressing along direction b, slide the rear cover along direction a till hear rear cover clicked. Removing Remove the UIM with two hands. a While pushing the cover in the direction of a, slide the rear cover in the direction of b. Lift the cover as shown by c. a b c Rear Cover b Slide the UIM in the direction of arrow and remove it from the FOMA Card slot. ab Approx.3mm FOMA card 20 Before Using the FOMA Terminal c Fit the rear cover to the ditch of FOMA terminal at approximately 3mm from the top tip of the FOMA terminal. While pressing along direction b, slide the rear cover along direction a till hear rear cover clicked. ab Approx.3mm Note
Make sure not lose the removed FOMA card.
Make sure to check the direction of FOMA card. IC
Be careful not to scratch FOMA card's IC parts.
Inserting FOMA card in the reverse direction may cause malfunction. Inserting and removing FOMA card with an excessive force may cause damage to your FOMA card.
Do not remove FOMA card while FOMA terminal is inserted to a PC, it may causes damage to your FOMA card. PIN1 Code You can set PIN codes (Personal Identification Number) for FOMA Card. The default setting for the PIN1 code is
"0000". The PIN1 code is a 4 to 8-digit security code to be entered every time the FOMA terminal is turned on for user verification to prevent any unauthorized use by others. If your FOMA card is set to require a PIN1 code, data communication cannot be performed until the PIN1 is entered. Start the L-05A High Speed Utility and verify the PIN1 code, or set (P69)not to verify the PIN1 code in advance. Changing the PIN1 Code You can change the PIN1 code to any number. To prevent any unauthorized use by third parties, change it to your own number. If you improperly enter the PIN1 code 3 times in a row, further entry is locked automatically (PIN lock), so be sure to keep a separate note of the numbers you set.
Entering PIN1 Code/ Changing PIN1 codeP70 PIN Unblocking Code The PIN Unblocking Code is the number used to unblock the PIN1 code. You are notified of your PIN Unblocking Code when you purchase your FOMA terminal. Entering the Unblocking Code (8-digit) unblocks the PIN lock. If you improperly enter the Unblocking Code 10 times in a row, the FOMA card locks automatically, so be sure to keep a separate note of the number. Before Using the FOMA Terminal 21 Start up L-05A Connection Software The PIN1 code Verification screen appears Enter PIN1 Code Incorrect entry 3 times in a row Enter Unblocking PIN Code OK Incorrect entry 10 times in a row You can set a new PIN1 code Contact a DOCOMO shop 22 Before Using the FOMA Terminal FOMA Card Types Please be aware that the FOMA card (Blue) has different functions from the FOMA card (Green/White) as follows:
FOMA card
(Green/White) Up to 20 digits Up to 26 digits FOMA card Function
(Blue) This terminal allows up to 20 digits. The number of digits of a phone number that can be saved to the FOMA card Phonebook WORLD WING Not available Available WORLD WING WORLD WING is DOCOMO's FOMA international roaming service that provides telephone and other types of mobile communications. It allows the subscriber to use the same phone number overseas as in Japan by inserting a FOMA card(green/white) into a FOMA terminal or a mobile phone designed for overseas use.
If you subscribed to the FOMA service after September 1, 2005, a separate subscription is not required. However, if you unsubscribed to the FOMA service subscription or canceled the service, a separate subscription is required. If you initially subscribed to the FOMA service before August 31, 2005 and have not subscribed to "WORLD WING", a separate subscription is required.
This service is not available with some billing plans.
Your FOMA card (green/white) is lost or stolen overseas, contact DOCOMO immediately and temporarily suspend your subscription. For contact information, see "docomo Information Center" on the back of this manual. Call and communication charges after the terminal was lost or stolen are still charged to you. Note
Communication fees become high when performing communications with large amount of data such as browsing websites with many graphics or downloading data.
Data communication fees under international roaming differ from those in Japan.
FOMA terminal does not support 64K data communication.
This FOMA terminal does not support Remote Wakeup.
This FOMA terminal does not support FAX communication. Available Communications Packet Communication Fees for this communication method are based on the amount of exchanged data. You can perform data communication at a maximum of 7.2Mbps for receiving and 5.7Mbps for transmitting by using a connection that allows FOMA communication such as mopera U, one of DOCOMO's Internet connection services. The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending is theoretical values and does not show the actual ones. The actual communication speed depends on communication environment and network congestion.
You can perform communication using international roaming undermopera U
Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps.
The communication speed varies depending on the access point and radio wave status.
The communication speed varies depending on the access point under international roaming.
Use theDOCOMO Connection Managerin the CD-ROM to check the approximate number of transmission bytes and charges under the communication. Before Using the FOMA Terminal 23 Usage Notes Internet service provider fees Fees to an Internet service provider may be required to connect to the Internet. These fees are added to the FOMA service fees and are paid to your Internet service provider directly. For details on connection fees, contact your Internet service provider. You can subscribe to such asmopera U, one of DOCOMO's Internet connection services. Charge for subscribing mopera U is required. For service and connection/settings of mopera, visit themopera web site. http://www.mopera.net/mopera/index.html (Japanese only) User authentication to access networks Depending on the access point, user authentication (ID and password) may be required to connect. If required, enter the ID and password from the dial-up network. The ID and password will be provided by the network administrator of your Internet service provider or the access point. For details, contact your provider or access point network administrator. Connecting FOMA Terminal to a PC When connecting FOMA terminal with computer for the first time, it is required to install L-05A connection software (including a driver). For installing L-05A connection software, refer to the followings.
For Windows: "Preparation for using L-05A" (P35)
For Macintosh: "Preparation for using L-05A" (P42) Inserting a Turn on a PC b Connecting the FOMA terminal with a PC When using a mounting folder and a USB extension cable
Use a mounting folder and a USB extension cable to fix on the top of a PC Requirements for packet communication The following conditions must be met to perform communications using the FOMA terminal. However, a connection may not be established if traffic is heavy at the base station or if radio signals are weak.
The FOMA terminal must be in a FOMA network or DOCOMO's roaming service area.
The access point corresponds to the FOMA packet communication. 24 Before Using the FOMA Terminal aPull out the projection part of USB connector 180 degree by fingertip cPut the FOMA terminal between the mounting folder and fix on the top of the PC Projection part bHold the connector part of USB extension cable and insert into the USB connector near the FOMA terminal along arrow direction USB connector Mounting folder PC dHold the connector part of USB cable and insert into PC USB port along arrow direction USB extension cable USB port USB extension cable Before Using the FOMA Terminal 25 When connecting with a PC directly
Insert the FOMA terminal into a PC USB port and use it directly.
The USB connector of FOMA terminal is able to turn 90 degree complying to directions of USB port aPull out the projection part of USB connector 90 degree by fingertip Projection part USB connector bThe FOMA terminal body turn the tip part of USB connector 90 degree as shown in the illustration cInsert the USB connector of FOMA terminal into a PC USB port USB connector USB port It is available to use without turning USB connector 90 degree as the above-mentioned procedure b.
USB connector USB port Note
Refrain from turning the FOMA terminal after inserting USB connector into PC USB port. Malfunction or damage may result when subject the FOMA terminal to severe shocks due to carelessness. 26 Before Using the FOMA Terminal c Start communication connecting Note Power Indication lamp Mode Indication Lamp
Confirm whether power indication lamp changes to red and mode indication lamp changes to green.
Using "L-05A connection software"P49
Using "DOCOMO connection manager"P77
Configuring manually (OS Standard)P89 Removing a End data communication
If the L-05A connection software/DOCOMO connection manager is already running, exit the L-05A connection software/DOCOMO connection manager. Verify that data connection is disconnected. b Remove the FOMA terminal When using a mounting folder and a USB extension cable aHold the connector part of a USB extension cable and pull out the FOMA terminal from PC USB port along arrow direction USB port USB extension cable Before Using the FOMA Terminal 27 bRemove the FOMA terminal along with the mounting folder from the top of the PC. Remove the mounting folder from the FOMA terminal dPack the USB connector into the FOMA terminal Mounting folder PC USB connector When connecting to a PC directly aHold the USB connector part of FOMA terminal. Pull out the FOMA terminal straightly from PC USB port cHold the connector part of the USB extension cable and pull out from the USB connector near the FOMA terminal along arrow direction USB connector USB port USB connector USB extension cable 28 Before Using the FOMA Terminal bTurn the tip part of the USB connector 90 degree as shown in the illustration USB connector cPack the USB connector into FOMA terminal USB connector Caution
If you force to remove FOMA terminal and pull out the USB extension cable, this may result malfunction.
Removing FOMA terminal from USB connector during data communication may suspend data communication and result malfunction or data losses. Before Using the FOMA Terminal 29 Setting up Setting up 32 Windows Version 35 Macintosh Version 42 31 Setting up Data communication with L-05A
"Communication configuration file (Driver)" and "L-05A connection software" are required to install for a PC to recognize the FOMA terminal. "Communication configuration file (Driver)" will be installed along with "L-05A connection software". Although data communication is available with only L-05A connection software, if necessary using it after installing DOCOMO connection manager in addition is also available. Data communication is also available based on configuring manually after installing L-05A connection software. Installation of L-05A connection software Since L-05A has zero installation, when connecting the FOMA terminal to a PC for the first time, "L-05A connection software" installation screen appears automatically. "Zero installation" is supported by the PC with Windows OS in it. If zero installation works improperly, install L-05A connection software with the included CD-ROM. In addition, although Macintosh does not support the zero installation feature, installation continues through the CD-
ROM icon appears when connecting the FOMA terminal to a PC. The procedure of setting up is described on the next page. 32 Setting up Work Flow of Setting up Connecting the FOMA terminal with a PC Windows VersionP35 Macintosh VersionP42 Preparing the included CD-ROM Windows VersionP38 Macintosh VersionP45 Installing L-05A connection software (Driver) Windows VersionP39/ Macintosh VersionP45 Confirmation after Setup Using L-05A connection software Using DOCOMO connection manager Configuring manually(Only Windows) Operation configurations of L-05A connection softwareP66 Installing DOCOMO connection manager Windows VersionP79 Macintosh VersionP83 Communication configuring manuallyP90 Communication connection with L-05A connection softwareP50 Operatino configuration/communication connection with DOCOMO connection manager
DOCOMO connection manager manual Communication configuring manually with OS functionP109 Setting up 33 1 DOCOMO does not guarantee the operation under the supported OS of the OS is changed through update. 2 Required memory or available hard disk space may vary depending on the system environment of a PC. 3 Only Mac with CPU made by Intel Corporation is available. For latest information of operation environment, visit DOCOMO's "international web site"
Note
The software may not work depending on the operating system environment. DOCOMO does not guarantee any operation other than the environment operation described on the left side. Operating Environments Using this FOMA terminal under the following operational environments. Item PC Main Unit Requirement
Available CD-ROM drive to use from PC-AT compatible.
USB port (Comply with Universal Serial Bus Specification Rev1.1/2.0)
DOCOMO is not responsible for any incompatibility of the operation performed through the USB Hub (including USB port available from the monitor, keyboard, etc.)
Display resolution of 800600 pixels, High Color (65.536) or higher is recommended. OS1 Required Memory2 Hard Disk Space2 Windows 2000 SP4 or later (Japanese versions) Windows XP SP2 or later (Japanese versions) Windows Vista SP1 or later (Japanese versions) Mac OS X 10.4.11 (Japanese versions)3 Mac OS X 10.5.6 (Japanese versions)3 Windows 2000 : 64Mbytes or more Windows XP : 128Mbytes or more Windows Vista : 512Mbytes or more Mac OS X 10.4.11512Mbytes or more Mac OS X 10.5.6512Mbytes or more 50Mbytes or more available space 34 Setting up Windows Version The L-05A connection software only need to be installed when you connect the FOMA terminal to your PC for the first time. Note
Do not remove the FOMA terminal while installing.
Installation may take several minutes depending on the PC you use.
Do not install or uninstall during data communication.
When installing, make sure to install from the account with PC supervisor privileges. An error will occur during installation if you install from the account without these privileges.
For details on setting up PC supervisor privileges, contact your computer manufacturer or Microsoft Corporation. Preparation for Using L-05A Setting Zero Installation (Auto) For Windows Vista a Connect the FOMA terminal with a PC The setup screen of L-05A connection software is automatically displayed by zero installation.
"" screen will be displayed depending on setting.If the screen is displayed, check "
" and select "Launcher.exe"
np When the Setting up screen of L-05A connection software is not automatically displayed, install with the included CD-ROM (P38) Setting up 35 d Click " (I Agree)"
Installation starts. e Click "(Next)"
b Click "(Allow)" on "
(User account control)" screen For Windows XP/2000
Because "(User account control)"
screen is not displayed, follow the next step c Click "(Next)"
36 Setting up f Click [OK]
g Click "(Finish)"
h Confirm whether the FOMA terminal is recognized by PC On the lower right side of task tray, "
(Device driver software is being installed)" message is displayed, and the FOMA terminal is recognized automatically. If the FOMA terminal is recognized properly, "
(The device is ready for use)" message is displayed. Installation of L-05A communication configuration file
(Driver) continues. Setting up 37 For Windows XP
On the lower right side of task tray, "
(A new hardware has been found.)"
message is displayed, and the FOMA terminal is recognized automatically.
If the FOMA terminal is recognized properly, "
(A new hardware has been installed and ready for use.)"
message is displayed. For Windows 2000
The warning screen of removing device is displayed which has nothing to do with using continually.
"(A new hardware has been found.)" message is displayed, and the FOMA terminal is recognized automatically. Setting Manually (CD) For Windows Vista a After starting a PCInsert the included CD-
ROM into the PC b "(Start)""(All programs)""(Accessory)"Click
"(Specify a file name and run)"
For Windows XP/2000 Click [(Start)]
(Specify a file) c Enter "<CD-ROM>:Windows L-05A StartCD.exe" in "
(Name)" Click "OK"
"" screen will be displayed depending on setting.If the screen is displayed, check "
" and select "Launcher.exe"
d Perform the same operations as those after step 2 or later on "Setting Zero Installation
(Auto) (P36)"
38 Setting up Confirmation after Installation Confirming L-05A Connection Software a Double click L-05A connection software icon When the following screen is displayed, the confirmation of installation finishes. Confirming the Installed L-05A Configuration File
(Drivers) Confirm whether L-05A Communication Configuration File
(Drivers) is set in a PC. For Windows Vista a Click
"(Start)""
(Control panel)""
(System and maintenance)""
(Device manager)""(Continue)"
For Windows XP Click "(Start)""(Control panel)""(Performance and maintenance)""(System)""
(Device manager)" of "(Hardware)"
tab For Windows 2000 Click "(Start)""(Settings)""
(Control panel)""(System)""
(Device manager)" of "(Hardware)"
tab Setting up 39 b Click each device display to confirm the driver name installed
Confirm whether the driver name is displayed below "
(COM LPT)(Port (COM and LPT))", "(Modem)"
Note
If FOMA terminal is not recognized through the PC's USB port, try other available USB port. FOMA terminal may not be recognized properly with some USB port of PC.
When communicating data with L-05A connection software, application operation of L-05A is required. P66
When communicating data with DOCOMO connection manager without L-05A connection software, installation of DOCOMO connection manager is required.P79
When communicating data with neither L-05A connection software nor DOCOMO connection manager, configure it manually.P90
COM port number differs depending on user and PC. Device name Port
(COM and LPT) Modem Driver name FOMA L05A USB Serial1 Device FOMA L05A USB Serial2 Device FOMA L05A 40 Setting up Uninstalling L-05A Connection Software
(including a driver)
Before uninstalling, remove the FOMA terminal from the PC.
When uninstalling, make sure to install from the account with PC supervisor privileges.
Make sure to save important data in FOMA card. Uninstallation will results in data loss when Phonebook or SMS data is saved in PC. For Windows Vista a
"(Start)"" (All programs)""L-05A (L-05A connection software)"Click "Uninstall"
For Windows XP
" (Start)"" (All programs)"
"L-05A (L-05A connection software)"Click
"Uninstall"
For Windows 2000
" (Start)"" (Program)""L-05A
(L-05A connection software)"Click "Uninstall"
b Click "(Allow)" on "
(User account control)" screen If "(Cancel)" is clicked, uninstallation will be stopped. For Windows XP/2000
Since " (User account control)"
screen is not displayed, follow the next procedure. c Click " (Uninstall)"
d Click [OK]
Setting up 41 Macintosh Version When installing L-05A connection software, make sure to finish " (DOCOMO connection manager)" first. Note
Do not remove the FOMA terminal while installing.
When installing, make sure to install from the account with PC supervisor privileges. Preparation for Using L-05A Setting Zero Installation (Auto) a Connect the FOMA terminal with a Mac CD-ROM icon is displayed on the desktop. b Double click the CD-ROM icon e Click [OK]
f Click " (Finish)"
Uninstallation finishes. 42 Setting up c Double click "L-05A
.mpkg (L-05A connection software installer.mpkg)"
e Click " (Continue)"
d Click " (Continue)"
f Confirm " (The license agreement)". If agree with the content, click
" (I Agree)"
Setting up 43 g Click " (Install)"
i Click "(Continue installing)"
h Enter administrator passwordClick "OK"
j Click "(Restart)"
Mac restarts. Installation finishes. 44 Setting up Setting Manually (CD) a Start MacInsert the CD-ROM into Mac b Double click CD-ROM icon"Mac""L-05A CD-ROM icon on desktop appears. connection software"
c For subsequent steps, operate the same procedures as those after procedure 3 in "Set Zero Installation (Auto)" (P43) Confirmation after Installation Confirming L-05A Connection Software a Double click L-05A connection software icon When the following screen is displayed, the confirmation of installation finishes. Note
When communicating data with L-05A connection software, setting application operations of L-05A is required.P66
When communicating data with DOCOMO connection manager without L-05A connection software, installation of DOCOMO connection manager is required.P79 Setting up 45 Uninstalling L-05A Connection Software
(including a driver)
Before uninstalling, remove the FOMA terminal from the Mac.
When uninstalling, make sure to install from the account with PC supervisor privileges.
Make sure to save important data in FOMA card. Uninstallation will results in data loss when Phonebook or SMS data is saved in PC.
End "DOCOMO connection manager" when uninstalling L-05A connection software. Insert the included CD-ROM into a Mac CD-ROM icon is displayed on the desktop. a b Double click the CD-ROM icon c Double click "Mac"
d Double click "L-05A (L-05A connection software)"
e Double click ".app
(Uninstaller.app)"
46 Setting up f Click "(Uninstall)"
g Enter administrator password Click "OK"
h Confirm whether the FOMA terminal is connected to USB port before restarting i Click "(Restart)"
Mac restarts. Uninstallation finishes. Setting up 47 L-05A Connection Software L-05A Connection Software 50 Using Packet Communication 53 Using SMS 54 Using Phonebook 63 Using Application Option 66 L-05A connection software is available to use on either Windows or Macintosh. Despite the display images of Windows version and Macintosh version are a little different, icons on the screen and available functions are same. Please note that in this chapter the descriptions are based on screen images of Windows. 49 L-05A Connection Software The L-05A connection software allows you to use packet communication/SMS/Phonebook. Using Packet CommunicationP53 Allows you to easily use packet communication. Launching and Exiting Connection Software (For Windows) Launching
Double click Exiting created on the desktop.
Click located on the top of main application screen. Using SMSP54 Features of composing messages, Inbox, Outbox, Drafts box and Saving to FOMA card are available. Using PhonebookP63 Features of composing messages, adding and deleting new group, transferring group, adding new item, modifying user, delection are available. Using Application OptionP66 Confirm the amount of packet communication data usage, configure internet option, configure FOMA card, enter PIN1 code, configure the connection type (PDP), reset FOMA terminal, configure network are available. Note
Data of L-05A connection software will be saved in PC if no destination is specified. 50 L-05A Connection Software Launching and Exiting Connection Software (For Macintosh) If connect with L-05A, it will be recognized as a CD-ROM first. For recognizing as a modem, drug the CD-ROM icon into trash. Launching
Launch "Finder" "(Application)" "L-05A
.app (L-05A connection software.app)"
Exiting
Menu bar "L-05A (L-05A connection software)"
"L-05A (Quit L-05A connection software)"
Main Application Screen
(Out of service area) In no signal reception area Internet Connection International Roaming Unopened message found 1 W-CDMA (3G) A third generation mobile communication network complying with 3GPP Global standards. 3Gpp means 3rd Generation Partnership Project. The local standardization organization established for the development of common technical specifications related to 3rd Generation Mobile Communication Systems (IMT-2000). 2 HSDPA (Short for High Speed Downlink Packet Access) HSUPA (Short for High Speed Uplink Packet Access) A high speed type of W-CDMA data communication. It is called
"3.5G" since it is the improvement version of 3rd generation
(3G) cell phone (W-CDMA). 3 GSM (Short for Global System for Mobile Communication) The second generation mobile communication network in a digital communication system that is most widely used around the world. 4 GPRS (Short for General Packet Radio Service) GPRS is the 2.5 generation mobile communication system that enables highspeed packet communication using GSM. a b c d e f a List of icon indicating FOMA terminal status Signal reception level Strong Weak Network type W-CDMA1, HSDPA2, HSUPA2, GSM3/GPRS4 L-05A Connection Software 51 b StatusMessage display area
FOMA terminal,warning messages, operation status, network name.
The information of currently accessed network operator is displayed when "network information" is set to "display"P116 f Current time/data display area
Current date and time are displayed.
Time is set conformable to PC time. Confirming My Number Click will see the following messages displayed. from the main application screen, and then you Version information My number c Buttons for connecting and disconnecting to Internet
Click this button when connecting or disconnecting Internet. d Data communication information display area
During connecting to Internet, connection time and amount of loaded data are displayed. e Operation button
Buttons are available for SMS, Phonebook, Settings and Information.
: SMSP54
: (Phonebook)P63
: (Settings)P66
:(Information) P51 52 L-05A Connection Software Using Packet Communication You can use packet communication if click main application screen. from the Start Packet Communication a Click from the main application screen
Displays connection time, amount of downloaded data connection status icon
. Disconnecting to Packet Communication a Click from the main application screen
Packet communication will be disconnected after the messages displayed "(Connection is being disconnected)". Note
The packet communication may be automatically
disconnected depending on the network status or location. In packet communication, fees apply on the amount of sent/received data. Note that the communication fees may become high if you perform heavy communications such as by browsing websites which include large multimediacontents or if you download a lot of data.
Data communication fees under international roaming differ from those in Japan. L-05A Connection Software 53 Using SMS Allows you to use various SMS features if click the main application screen.
Maximum number of SMS stored in PC is 1000. Depending on PC's available hard disk space, number may differ. (Excluding FOMA card SMS box) from When Receiving SMS The following screen appears when receiving SMS. a Click Composing SMS a Click from the SMS application screen b Enter the SMS from the SMS composing screen
SMS can be entered up to 70 characters (English alphabet
& numeric characters can be entered up to 160 characters) Composing SMS Transferring to phonebook Entering receiver's phone number Message/receiversreset, sending SMS Composing SMS Outbox Inbox Drafts box FOMA card SMS box 54 L-05A Connection Software c Enter the receiver's phone number
Enter the receiver's phone number by clicking the input or click to display phonebook and decide a receiver.
If you edit SMS or receiver, enter directly in SMS edit screen or phone number field to modify. Note
You will be prompted whether you want to save the SMS to Drafts box or not, when moving to other applications or when failure incurred in transmission. If you click
, the SMS will be saved to Drafts box. If you click , SMS will not be saved to Drafts box. the d Click
SMS are being sent.
Result of sending SMS.
Setting "SMS(Multi-refuse SMS)"
By using the following AT command, SMS is set in terminal software. For details of terminal software, refer to "
(Configuring Network Manually)" P90 SMS refuse: AT+CUSD=1,"*141*1#",15 Unlock SMS refuse: AT+CUSD=1,"*141#",15 L-05A Connection Software 55 Inbox
Allows you to store SMS to Inbox. Confirming SMS from Inbox a Click
Displays the list of received SMS. from the SMS application screen Replying and Forwarding SMS from Inbox a Click b Select the reply/forward from Inbox list from SMS application screen Click
"(Reply)/(Forward)" menu is displayed b Select and confirm the SMS from the SMS list
: SMS opened
: SMS unopened
"(Reply)" Receiver phone number is automatically entered and move to the SMS composing screen.
"(Forward)" SMS to be sent are automatically entered, and move to the SMS composing screen. The receiver phone number is required to enter. Receiver phone number Browse phonebook application screen P64 c Click Note
The SMS status becomes opened once you click the received SMS. 56 L-05A Connection Software Copying Inbox SMS to FOMA Card a Click b Select the SMS and right-clickClick "FOMA from SMS application screen
(Save to FOMA card)"
Outbox
Allows you to store SMS in Outbox. Confirming SMS from Outbox a Click
Displays the list of sent SMS. from SMS application screen
"FOMA(Save to FOMA card)": Copy the received SMS of PC to FOMA card.
You can copy 20 SMS in total including sent and received to your FOMA card. b Select and confirm the SMS from the list Deleting SMS from Inbox a Click b Select the SMS to delete from the list of from SMS application screen InboxClick
"(Delete)""(Delete all)" menu displayed
"(Delete)"
"(Delete all)" Delete all SMS The message for confirming is displayed. Delete the selected SMS. c Click Sent SMS Receiver's phone number Browse phonebook application screen P64 L-05A Connection Software 57 Editing SMS from Outbox a Click from SMS application screen b Select the SMS to send from the list of OutboxClick
SMS composing screen Copying SMS from Inbox to FOMA Card a Click b Select the SMS and right clickClick "FOMA from SMS application screen
(Save to FOMA card)"
You will be prompted with SMS composing screen as soon as the receiver phone number and SMS are entered.
You can add or edit SMS and receiver phone number. c Click
"FOMA(Save to FOMA card)" Copy sent SMS stored in a PC to FOMA card.
Up to 20 received and sent SMS can be stored in FOMA card. Note
The information of time will not be saved when SMS are copied from Inbox to FOMA card. 58 L-05A Connection Software Deleting SMS from Outbox a Click b Select the SMS to delete from the list of from SMS application screen InboxClick
"(Delete)""(Delete all)" menu is displayed.
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click Drafts Box
Allows you store temporary SMS in Drafts box. Confirming SMS from Drafts box a Click from SMS application screen
The list of SMS from Drafts box will be displayed. b Select and confirm the SMS from the list of Drafts box L-05A Connection Software 59 FOMA Card SMS Box
Allows you to save SMS copied from Inbox or Outbox are to FOMA card SMS box.
Up to 20 received and sent SMS can be stored in FOMA card. Confirming SMS from FOMA Card SMS Box from SMS application screen a Click
The list of SMS from Drafts box will be displayed. b Select and confirm the SMS from the FOMA card SMS box
:Received SMS
(SMS unopened)
:Received SMS
(SMS opened)
:Sent SMS Editing from Drafts Box a Click b Select the SMS to edit from the list of drafts from SMS application screen boxClick
You will be prompted with SMS composing screen as soon as the receiver's phone number and SMS are entered.
You can add or edit SMS and receiver's phone number. c Click Deleting SMS from Drafts box a Click b Select the SMS to delete from the list of from SMS application screen drafts boxClick
"(Delete)" and " (Delete all)" menu is displayed.
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click 60 L-05A Connection Software Replying and Forwarding SMS from FOMA Card SMS Box a Click b Select the SMS to reply/forward from the list from SMS application screen of FOMA card SMS boxClick
"(Reply)""(Forward)" menu is displayed. Deleting SMS from FOMA Card SMS box a Click b Select the SMS to delete from the list of from SMS application screen FOMA card SMS boxClick
"(Delete)""(Delete all)" menu is displayed.
"(Reply)"
You will be prompted with SMS composing screen as soon as the receiptor's phone number and SMS are entered.
"(Forward)" The SMS to be sent will be automatically entered, and move to SMS composing screen. The receiver's phone number is required to enter. c Click
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click L-05A Connection Software 61 Saving SMS in FOMA Card SMS Box to PC a Click from SMS application screen b Select the SMS to save from the list of FOMA card SMS boxRight click c Click "(Save to PC)"
d Click 62 L-05A Connection Software Sending SMS from Phonebook a Select the phonebook record to send b Click from the phonebook application
Receiver's phone number is automatically entered and move to the SMS composing screen. c Click d Click Note
Refert to "SMS (Composing SMS)" to enter the SMS.P54 Sending SMS from Japan to Overseas SMS
You can use the same mobile phone number overseas as is
used in Japan. If receiptor's terminal is FOMA terminal Enter "+", and
"country code", in front of receiptor's phone number, if receiptor is subscribed to overseas carrier other than NTT DOCOMO. Also, enter the "010" "Country code" "Receiptor's mobile phone number" in order. (If receiptor's phone number starts with "0", enter the phone number without "0"
If the receiptor received unsupported characters of SMS from the sender who subscribed to other overseas carrier, the message may not be displayed properly. Using Phonebook Click allows you to use various features of phonebook. The list of stored phonebook records are displayed when Phonebook records are stored in FOMA card.
Total number of phonebook records to be stored may be different depending on PC's available hard disk space. Total number of phonebook records stored in FOMA card is maximum 50.
:Phonebook record stored in FOMA card
:Phone number stored in PC
:Composing SMS
:Adding and deleting new group
:Transferring group
:New record
:Editing record
:Delete L-05A Connection Software 63 Adding Phonebook Record
Follow the steps to add new phonebook record from the Phonebook application a Click b Start the following operations Select a group Enter the name to be added Enter the phonebook to be added Searching Phonebook Record a Enter the name to be searched
You can search phonebook record by entering phone number. b Click Editing Phonebook Record a Select the phonebook record to be edited
You can enter Kanji, Hiragana, Katakana, English, number, character. (Full-width 10 character. Half-width 21character). You can enter the 20 character length. c Click
Save entered information to phonebook. Not save entered information to phonebook. d Click 64 L-05A Connection Software b Click from the phonebook application
Edit phonebook record number if editing screen appears. c Click
Save entered information to phonebook. Not save entered information to phonebook. d Click Deleting Phonebook Record a Select phonebook record to delete b Click from the phonebook application Adding New Group a Click b Enter the group name to be added from the phonebook application
You can enter Kanji, Hiragana, Katakana, English, number, character. (Full-width 20character , Half-width 20character). Delete phonebook record. Cancel deleting phonebook record.
Note
If you have many phonebook record to delete, multi-select phonebook records by using shift or Ctrl keys from key board and then click delete button to delete the selected phonebook record. c Click d Click L-05A Connection Software 65 from the phonebook application Deleting Group Name a Click b Select the group name to be deleted c Click d Click Note
"(Default)" group and "FOMA (FOMA card)"
group can not be deleted. Phonebook Record Transfering Other Group a Select the phonebook record to be transferred b Click from the phonebook application c Select the group name to be transferred d Click
Transfer the selected phonebook record to the group you want to transfer to. Note
If selecting two or more record, select records by using Shift or Ctrl keys and then click "(Transfer)" to collectively transfer. 66 L-05A Connection Software Using Application Option Click option by clicking from the main application screen. allows you to use various features of application Amount of downloaded data Internet option FOMA card Connection configuration FOMA terminal reset Network setup The following s are required to connect Internet with L-05A connection software. a The setting of provider information Register APN with other registration number (<cid>) on
"(Connection type configuration)" screen.
(P72) b Basic setting Configure "*99***<cid>#" as a dial number during packet communication on "Basic setting (Internet Option)"
screen. Also configure "User name", "Passward" provided by provider if required. Based on the above preparations, the APN with registration number entered in <cid> will be connected to. Confirming Packet Communication Volume
Confirms that the amount of data transmission used in packet communication a Click from the application option screen.
(Total usage) 1 (Monthly usage)
(Current usage)
(Total usage) Accumulated total data usage Initialize total usage to zero 1(Monthly usage) Monthly usage Initialize monthly usage to zero data usage of current session Note
The data usage displayed on the screen may differ from the actual volume of packet communication. Configuring Internet Option
Allows you to configure basic settingsfor connecting to Internet. from the application option screen a Click b Start the following operations
(ID)
(Password)
(Service number)
(Configuration) SMS
(SMS center number)
(Configuration)
(Basic setting reset) L-05A Connection Software 67
(ID) ID supplied from service provider
(Password) The password supplied from service provider
(Service number) number of service provider For packet communication, enter *99***<cid>. Enter the registration number of APN set in <cid>(P72). SMS(SMS center number) Normally, change in setting is not necessary. Enter SMS center number when using SMS from the network operator other than DOCOMO.
(Configuration) Click to change setting
(Basic setting reset) Click to return to basic setting c Click the applicable Note Configuring FOMA Card
Allows you to configure "PIN1(PIN1 lock)", "PIN1
(PIN1 unblocking)", "PIN1 (PIN1code change)"
a Click from the application option PIN1
(PIN1 Mode) PIN1
Click
"(Configuration)" to renew the setting. Always remember to click when setting is changed.
You will not connect to Internet if ID, password and service number are incorrect.
SMS may not be sent or received when SMS service
number has been improperly entered. In Macintosh, input any character in user name and passward. 68 L-05A Connection Software Locking PIN1
Set security to FOMA card. a Select "PIN1(PIN1 locking)" from PIN1 mode b Enter the PIN1 code configured in FOMA card to "PIN1"
Unblocking PIN1 a Select "PIN1(Unblocking PIN1)" from PIN mode b Enter the PIN1 code configured in FOMA card to "PIN1"
c Click d Click Note
When starting L-05A connection software with PIN1 locked, you need to enter PIN1 code from the screen of entering PIN1 code.You can not use FOMA terminal properly unless you enter correct PIN1 code. c Click d Click Note
If PIN1 unblocking code is set, you can use FOMA card information from FOMA terminal without verifying PIN1 code. L-05A Connection Software 69 d Enter the PIN1 code entered in "PIN1
(New PIN1code)" code in "
(Confirming New PIN 1code)"again to verify e Click f Click Modifying PIN1 Code
Set the password required when unlocking or locking PIN1.
Changing PIN1 code is only available when PIN is locked. a Select "PIN1(Changing password of PIN1)" from PIN1 mode PIN1 (PIN1 Mode) PIN1 (PIN1 Code) PIN1
(Current PIN1 Code) PIN1
(PIN1 Code to change) PIN1
(Confirming PIN1 Code to change) b Enter the FOMA card PIN1 code to "PIN1"
c Enter the PIN1 code change in "PIN1
(New PIN1 code)"
70 L-05A Connection Software Entering PIN1 Code
When L-05A connection software is started after setting PIN1 Lock, PIN1 code input screen will appear or it is restart to reset FOMA terminal.
a Enter PIN1code Enter the 4 to 8 PIN1 code Ex.3 When PIN1 code has been improperly entered 3 times in a row. If you improperly enter the PIN1 code 3 times in a row, the verification screen for unblocking PIN1 code will be displayed. Unblocking locked PIN1 code a Enter the unblocking PIN1 code to "PIN1
(Unblock)"
code)" to change b Enter the PIN1 code to "PIN1(New PIN1 c Enter the PIN1 entered in "PIN1(New PIN1 code)" in "(confirming New PIN1 code)" to confirm d Click b Verify the result after entering PIN1 code Ex.1 When PIN1 code has been successfully entered. Ex.2 When PIN1 code has been improperly entered. L-05A Connection Software 71 Caution
Be careful not to lose FOMA card. DOCOMO is not responsible for the lost or stolen device.
Do not transfer FOMA card to others.
Treat it carefully as the data stored in FOMA card can be easily damaged from scratching or bending.
When connecting FOMA terminal to a PC for the first time,
you are required to enter PIN1 code to use FOMA card. If an incorrect PIN1 code is entered 3 times in a row, the service will be suspended. To use it again, you must enter unblocking PIN1 code. If an incorrect unblocking PIN1 code is entered 10 times in a row, FOMA card locks automatically, so be sure to keep a separate note of the number. Contact a DOCOMO shop if you are not able to unblock the locked PIN 1. Configuring Connection type (PDP Type)
Configure connection type. from Internet Option screen a Click b Start the following operations a
(Registration number (cid)) b (Connection type) c
(Access Point Name (APN)) d
(Connection type registration) e
(Connection type setting reset) a (Registration Number(cid)) The registration numbers are available from cid1 to cid 10 in FOMA terminal. To connect to a provider other than mopera Uor mopera, you can set the access point name (APN) to any of cid2 or cid4 to cid10. b (Connection type) PDP type IP and PDP type PPP are available for Internet connection type. You can select the Internet connection type you want to use or check the currently configured internet connection type. 72 L-05A Connection Software c (Access Point Name (APN)) Configure APN for packet communication. You can configure APN of provider you want to use or check the currently configured APN. Connection type registration Save the modified information to FOMA terminal. Connection type setting reset d e Reset all PDP configurations. b Select the Internet connection type supporting Access Point. Saving and Editing the Provider Information
Save or edit the provider information you want to use. a Select cidSelect the registration number to save/edit cid The registration numbers are available from cid1 to cid 10 in FOMA terminal.
To connect to a provider other thanmopera Uor mopera, you can set the access point name (APN) to any of cid2 or cid4 to cid10. Registration numbercid 1 2 3 Access Point nameAPN mopera.ne.jpmopera Unassigned mopera.netmopera U 410 Unassigned c Enter APN
When "cid=3"selected "PDP type IP" Configure mopera.net This service provides a maximum data speed of 7.2Mbps for receiving and 5.7Mbps for sending.
When "cid=1" selected "PDP type PPP" onfigure mopera.ne.jp This service provides a maximum data speed of 384kbps for receiving and 384kbps for sending. L-05A Connection Software 73 Note Configuring sender ID You can configure to display sender ID or not by adding 186/184 before APN.
Add "186." before APN if you want to display sender ID.
Add "184." before APN if you don't want to display sender. Resetting FOMA Terminal
Allows you to reset FOMA terminal. a Click from the application option Registration Display sender ID Not display Sender ID APN 186.mopera.net 184.mopera.net d Click
Click FOMA
(FOMA terminal reset) Retrieving Provider Information aIf select the cid of the "(Registration Number(cid))" b"(connection type)" and c"
(Access Point Name (APN))"will be displayed. FOMA(FOMA terminal reset) Reset FOMA terminal for the following cases
When FOMA terminal is operating improperly.
When FOMA card is reinserted while inserting the FOMA terminal to a PC. 74 L-05A Connection Software b Click
FOMA terminal is restarting. L-05A Connection Software 75 DOCOMO Connection Manager DOCOMO Connection Manager Windows Version Macintosh Version 78 79 83 77 This manual introduces the installation method of DOCOMO connection manager. For connecting the terminal with Internet, agreement with the Internet service provider (mopera U etc.) supporting service and data communication is required. View DOCOMO web site for detailed information (Japanese only). Note Using a flat-rate data plan
For using a flat-rate data plan, the agreement with the charge plan corresponding to the flat-rate data communication and internet service provider is required. View DOCOMO web site for further information. Using measured-rate data communication
Note that the communication fees may come high if you perform heavy packet communications such as viewing home page with pictures inside, downloading data (Ex. Application/Music/Data/OS/anti-virus software update) etc. Note that when performing data communication after connecting this FOMA terminal with a PC by a USB cable,
(Pake-hodai) (Pake-
hodaifull)Biz (Biz-hodai) andBiz
(Biz-hodai double) are not included in the FOMA packet Flat-rate service. Using mopera
For connection configuration, view mopera web site. http://www.mopera.net/mopera/support/index.html
(Japanese only) DOCOMO Connection Manager DOCOMO connection manager is a software packets the necessary connection software to operate "
(Flat-rate data plan connection software)" and measured data communication which are necessary when using flat-rate data plan. DOCOMO connection manageris a software to connect data communication terminal by data communication correponding terminal. Subscribing mopera Uor configuring a PC operates easily. Also, confirming amount of data communication and charges through charge counter feature is available. Charge counter Windows version Macintosh version Connect/disconnect 78 DOCOMO Connection Manager Windows Version Before Installing DOCOMO Connection Manager Setting Internet Explorer Before installing this software, set connection setting to
" (Do not dial)" in Internet Option of Internet Explorer. Note Use other connection software besides DOCOMO connection manager This software has equate features with the following software. Therefore, it is not necessary to use the following software at the same time. If required, change the setting to not start or uninstall.
- mopera U start up tools
- mopera U connection & setting tool
- FOMA PC configuration software
- FOMA byte counter Also, when using Mzone (Public Wireless LAN Connection) in this software, uninstall the following public wireless LAN connection software. When the following software are installed at the same time, the Mzone connection of this software is not available.
- U Public Wireless LAN Utility Software
- DOCOMO Public Wireless LAN Utility Software
- DOCOMO Public Wireless LAN Utility Program a Start Internet ExplorerSelect " (Tool)""
(Internet Option)"
b Select " (Connection)" tabSelect " (Do not dial)"
c Click "OK"
DOCOMO Connection Manager 79 For Windows Vista a Log on by DOCOMO connection manager user An administrator is required. When logged on by other people than the administrator, entering user name and password will be asked. For Windows XP/2000 The user belongs to administrators group or the user of " (Administrator of computer)"
operates log-on. b Exiting all the applications launched Besides anti-virus software, programs resident in Windows are also finished.
Ex: Right click the icon shown on task bar, and select "
(Close)" or " (Finish)". Installing DOCOMO Connection Manager a Launch the installer of DOCOMO connection manager using the included CD-ROM Select "CD-ROM (the included CD-ROM)" "Windows"
"dcm_connect_manager""dcm_connect_full_setup.exe"
Note
When Windows XP does not contain MSXML6 and Wireless LAN API, installation is required before installing DOCOMO connection manager. Press "Install" when the confirmation screen is displayed.
After finishing installing MSXML6 and Wireless LAN API, if reboot Windows, the installation of DOCOMO connection manager starts automatically. b Click " (Continue)"
For Windows XP/2000, " (User account control)" screen is not displayed. Setup program starts right away. 80 DOCOMO Connection Manager c Click " (Next)"
e Confirm the content of the license agreement. When agree with the content, select "
(I agree with the license agreement stipulations)" and click "
(Next)"
d Make sure to confirm the caution and then click " (Next)"
f Confirm the destination folder and click "
(Next)"
DOCOMO Connection Manager 81 g Click " (Install)"
Installing starts. h Click " (Finish)"
Installing finishes. Launching DOCOMO Connection Manager a
" (Start)""(All programs)""NTT DOCOMO""
(DOCOMO connection manager)""
(DOCOMO connection manager)"
DOCOMO connection manager starts. b For the first launching, the wizard setting is displayed automatically. The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual).pdf for detailed information. 82 DOCOMO Connection Manager Note
Just exiting the Internet browser or mail software does not disconnect the connection. When do not use communication, make sure to press "
(Disconnect)" button to disconnect the connection. For OS update, if auto update is set, the software will be updated automatically. Note that the packet communication fee may come high. Macintosh Version Installing DOCOMO Connection Manager Note
Use Ver. 1.00.0003 or later for "DOCOMO connection manager for Mac". a Launch the installer of DOCOMO connection manager from the included CD-ROM
Select "CD-ROM (included CD-ROM)" "Mac"
"dcm_connect_manager" "dcm_for_Mac" "
(Install)" Select "
(Install DOCOMO connection manager)" and click
"OK"
Disconnect DOCOMO Connection Manager 83 b Click " (Continue)"
d Click " (Continue)"
c Make sure to confirm " (Important information)", and click " (Continue)"
84 DOCOMO Connection Manager e Confirm " (The license agreement)", when agree with the content, click " (I Agree)"Click "
(Continue)"
f Confirming the destination folder to install and click " (Install)"
g Enter administrator name and passwordClick "OK"
The user account created after Mac OS X is set becomes the administrator of PC. Enter the used name and password. DOCOMO Connection Manager 85 h Click " (Continue installing)"
Note
If click " (Log out)", setting assistant screen is displayed. The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual) for detailed information. i Click " (Log out)"
Installing finishes. 86 DOCOMO Connection Manager Note
Just exiting the Internet browser or mail software does not disconnect the connection. When do not use communication, make sure to press "
(Disconnect)" button to disconnect the connection. For OS update, if auto update is set, the software will be updated automatically. Note that the packet communication fee may come high. Launching DOCOMO Connection Manager a
" (Application)" "
(DOCOMO connection manager)" "
(DOCOMO connection manager)"
DOCOMO connection manager starts. b For the first launching, the wizard setting is displayed automatically The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual.pdf) for detailed information. Disconnect DOCOMO Connection Manager 87 Configuring Network Manually Configuring a Dial-up Network Manually 90 Communicating (Connecting by Dial-up) 109 89 For Windows XP a Connect the FOMA terminal with a PC
Connecting methodP24 b Click "(Start)" "
(All programs)" " (Accessories)"
"(Communication)" "
(Hyper Terminal)"
Hyper Terminal starts. For Windows 2000 Click "(Start)" " (Programs)" "
(Accessories)" "(Communication)" "
(Hyper Terminal)". c Enter a connection name in the " (Name)"
field Click "OK"
Configuring a Dial-up Network Manually This section describes the steps to configure settings for packet communication without using L-05A connection software or DOCOMO connection manager. Setting APN Set the access point (APN) in packet communication. Up to 10 APN can be set up and they are managed with cid's. Communication software is required to enter AT commands. This section describes the steps necessary for using the "(Hyper Terminal)" that comes with Windows.
The registration number (cid) 1 is set to mopera.ne.jp and the registration number 3 is set to mopera.net by default. Use cid 2 or from 4 to 10 when setting another access point.
"(Hyper Terminal)" does not come with Windows Vista. To configure the settings in Windows Vista, use communication software compatible with Windows Vista. For the setting procedures, refer to the instruction manual and other documentation that came with the software to be used. For a connection (APN) other than mopera U or mopera
, contact your ISP or network administrator.
90 Configuring Network Manually d Enter a non-existing phone number (such as
"0") in the "(Phone Number)" field Check that "FOMA L05A" is displayed for "
(Connection Method)" Click "OK"
If more than one modem name are displayed in the "
(Connection Method)" field, check the FOMA terminal modem name and select the proper one.P40 o e Click "(Cancel)" on the connection screen The Hyper Termina screen opens. f Enter the APN in the following formatPress Enter AT+CGDCONT=<cid>,"<PDP type>","<APN>"
Enter the following information in the corresponding <cid>,
<PDP type> and <APN> sections. If "OK" appears after you enter the information, the APN has been setup. cid Enter any number from 2, and from 4 to 10. Keep in mind that the old setting information will be overwritten if you select a cid number which has already been set. PDP type Select either PPP or IP for the connection method supported by the access point, and then enter the information enclosed in quotation marks (""). APN Enter the connection (APN) enclose it in quotation marks " ".
If the entered characters do not appear, enter ATE1. If register an access point with PPP in the PDP type and XXX.com in the APN of cid2 To reset the specified APN settings Enter AT+CGDCONT=<cid>
To view the registered APN Enter AT+CGDCONT Configuring Network Manually 91 g Check if "OK" is displayed h Click "(File)" "
(Exit Hyper Terminal)"
i Click "(Yes)" on the confirming disconnection screen Click "(No)" on the confirming to save screen Hyper Terminal will quit, and the setting of the APN completes. Note Configuring Dial-up Network Set up the dial-up network on the PC.
For setting up a connection to other than mopera U or mopera, contact your ISP or network administrator. Example: Connecting to the DOCOMO Internet connection service mopera U, which is registered to <cid>=3 For Windows Vista a Click
(Connection)"
"(Start)" "
b Click "
(Set up connection or network)"
The APN information is saved in the FOMA terminal. If you
connect a different FOMA terminal, save the APN information again. If you want to use the APN information registered on the PC, register the same APN in the same cid of the FOMA terminal. 92 Configuring Network Manually c Select "
(Set up dial-up connection)" Click "
(Next)"
d When the modem selection screen appears, click "FOMA L05A"
The modem selection screen opens only when the PC has more than one modem. Configuring Network Manually 93 f Click "(Skip)" on the "()...
(Connecting to (APN))" screen The connection test will not be performed. Only the settings will be checked.
If you do not click "(Skip)", the connection to the Internet will be established. e Configure various settings, then click "
(Connect)"
Enter the APN number in the "
(Phone number to a dial-up connection)".
Enter the user name and password specified by your ISP or network administrator in the "(User name)" and "
(Password)" fields.
You can leave the user name and password fields unfilled when connecting to mopera U/mopera.
Enter a connection name in the " (Connection Name)"
field. 94 Configuring Network Manually g Click "(Set up the connection)" "(Close)"
j Check the settings on the "(General)" tab window If two or more modems are connected to a PC, enable only "
- FOMA L05A (Modem - FOMA L05A)" in the "
(Connection Method)" field.
Disable "(Use dialing information)". h Click
(Connection)"
"(Start)" "
i Select the created dial-up connection icon Right click " (Properties)"
Configuring Network Manually 95 k Click "(Networking)" tab Configure each setting Place a checkmark next to the "
4 (TCP/IPv4) (Internet Protocol 4 (TCP/IPv4))"
checkbox in the "(This connection uses the following items)" field. Obtain the settings for "QoS(QoS Packet Scheduler)" from your ISP or network administrator.
To set up TCP/IP, click " (Properties)". Contact your ISP or network administrator for setting up. l Click the "(Option)" tab Click
"PPP(PPP Settings)"
m Remove checkmarks from all items Click
"OK"
n On the "(Option)" tab window, click
"OK"
96 Configuring Network Manually c Select "(Connect to the Internet)" Click "(Next)"
For Windows XP a Click "(Start)" "
(All programs)" " (Accessories)"
"(Communication)" "
(New Connection Wizard)"
b On the New connection wizard screen, click "
(Next)"
d Select "(Set up the connection manually)" Click "
(Next)"
Configuring Network Manually 97 e Select "
(Use a dial-up modem to connect)" Click "
(Next)"
g Enter a name in the "ISP(ISP Name)"field Click "(Next)"
f If "(Select a device)" screen appears, check in " - FOMA L05A
(COM4) (Modem - FOMA L05A(COM4))"
checkbox Click "(Next)"
The "(Select a device)" screen appears only when the PC has more than one modem. h Enter the APN phone number in the "
(Phone Number)" field Click " (Next)"
98 Configuring Network Manually For packet communication Enter "*99***<cid>#". Enter the registered number of APN in <cid>. (P73) i Select the connection usage range Click "
(Next)"
Select a user.
Depending on the PC settings, this screen may not appear. k Click "(Finish)"
The new connection wizard appears. j Fill in the "(User Name)", "
(Password)", and "
(Confirm password)" fields Click "
(Next)"
Enter the information provided by your ISP or network administrator.
Enter "(User name)" and " (Password)"
correctly according to the instruction from the provider. Pay attention to the capital characters.
To connect to mopera U or mopera, these fields can be left unfilled. l Click "(Start)" "
(All programs)" "(Accessories)"
"(Communication)" "
(Network Connection)"
Configuring Network Manually 99 n Check the settings on the "(General)" tab window
If more than one modem is connected to a PC, enable only
" - FOMA L05A (COM4) (Modem - FOMA L05A
(COM4))" in the " (Connection Method)" field.
Disable "(Use dialing information)". m Select the created dial-up connection icon Right click Click "(Properties)"
100 Configuring Network Manually o Click the "(Networking)"
tabConfirm each itemClick "
(Settings)"
Select "PPP:Windows 95/98/NT4/2000, Internet" in the "
(Dial-up server type to call)" field
Enable "(Internet Protocol) (TCP/
IP)" in the "(This connection uses the following items)" field. You cannot change the settings of "Qos (QoS Packet Scheduler)". Use it as usual.
When connecting to provider, to confirm the TCP/IP setting contact the provider or network administrator. q Remove checkmarks from all items Click
"OK"
r click "OK" on the "(Networking)"
tab window For Windows 2000 a Click "(Start)" "
(Programs)" "(Accessories)" "
(Communication)" "
(Network and Dialup Connections)"
b On the Network and Dial-up connection screen, double-click the"
(Create new connection)" icon p Click "(Settings)"
Configuring Network Manually 101 c If the location information screen appears, enter "(City code)" Click "OK"
This appears only when " (Create new connection)" is launched for the first time. Go to Step 5 when launching this for the second time or later. d On the phone and modem option screen, click
"OK"
e On the Network connection wizard screen, click "(Next)"
f Select "
(Connect to Internet via dial-up)" Click "
(Next)"
102 Configuring Network Manually g Select "
(LAN)
(Set up the Internet connection manually, or connect to the Internet using LAN)" Click "(Next)"
h Select "
(Connect to the Internet using a telephone line and a modem)" Click "
(Next)"
Configuring Network Manually 103 i If the modem selection screen opens, select
"FOMA L05A" Click " (Next)"
The modem selection screen opens only when the PC has more than one modem.
If "FOMA L05A" is not displayed, click "
(Select the modem used to connect to the Internet)" field and then select "FOMA L05A". j Enter the APN phone number in the "
(Phone Number)" field Click "
(Advanced settings)"
Do not enter anything in "(City code)" field
Disable "(Use the city code and dialing information)". Packet communication information Enter "*99***<cid>#". Enter registration number of APN in <cid>. 104 Configuring Network Manually k Configure the settings on the "
(Connection)" tab window according to the examples on the screen.
If you are connecting to other thanmopera U or mopera, fill in the " (Connection type)" and "
(Log on procedures)" fields according to the information provided by your ISP or network administrator. l Click the "(Address)" tabSet each itemClick "OK"
If you are connecting to other than mopera U or mopera, fill in the "IP (IP address)" and "ISP DNS ()
(Assign DNS address automatically by ISP)" fields according to the information provided by your ISP, and follow the instruction from provider. m On the "
(Internet account connection information)"
screen, click "(Next)"
Configuring Network Manually 105 n Enter "(User Name)" and "
(Password)" Click "(Next)"
Enter "(User name) and "(Password)"
correctly according to the instruction from the provider. Pay attention to the capital characters. Note
For mopera U or mopera, connection is operated even when "(User name)" field and "
(Password)" field are empty. The screen "
(Is it OK to enter nothing in User name?)" is displayed in this case. Click "(OK)" in each screen. 106 Configuring Network Manually o Enter a connection name in the "
(Connection Name)" field Click " (Next)"
q Click "(Finish)"
If "
(Select this to connect to the Internet now and click Finish)" appears, disable the option. p Select "(No)" Click "(Next)"
When setting Internet mail, select "(OK)". Contact the provider for detailed information of setting. r Select the created dial-up connection icon
Click "(File)" "
(Properties)"
Configuring Network Manually 107 s Check the settings on the "(General)" tab window
If more than one modem is connected to a PC, enable only
" - FOMA L05A (COM3) (Modem - FOMA L05A
(COM3))" in the " (Connection Method)" field
Disable "(Use dialing information)". 108 Configuring Network Manually t Click the "(Networking)"
tabConfirm each itemClick "
(Settings)"
Select "PPP:Windows 95/98/NT4/2000, Internet" in the "
(Dial-up server type to call)" field.
Enable only " (Internet protocol)
(TCP/IP)" in the "(Components)" field. u Click "(Settings)"
v Remove checkmarks from all items Click "OK"
w Click "OK" on the "(Networking)"
tab window b Enter "(User Name)" and "
(Password)" Click "(Dial)"
The APN will be connected.
To connect to mopera U or mopera , you can leave the " (User Name)" and "(Password)"
fields unfilled and click "(Dial)". If another ISP or dialup connection is selected, fill in the "(User Name)" and " (Password)" fields and click "
(Dial)".
You can save the user name and password or just the password to skip entering them next time.
Depending on the operating system, a connection completion screen may appear when the dial-up connection is established. However, the connection completion screen does not appear if you previously set the completion message not to appear. Communicating (Connecting by Dial-up) This section describes steps to start and terminate communication without using L-05A connection software or DOCOMO connection manager.
Check whether the FOMA terminal and the PC are connected properly before starting communication.P24
When performing communication, connect the FOMA terminal you used to configure the settings. If a different FOMA terminal is connected, L-05A Communication Configuration Files
(Drivers) may need to be reinstalled. For Windows Vista a Click
"(Start)" " (Connect to)" Select the access point that has been set up Click " (Connect)."
For Windows XP Click " (Start)" "(All programs)" " (Accessories)" "
(Communication)" "(Network connection)" Double click the APN that has been set up For Windows 2000 Click "(Start)" " (Programs)" "
(Accessories)" "(Communication)" "
(Network and Dialup Connections)" Double-click the APN icon that has been set up. Configuring Network Manually 109 c Click "(Disconnect)"
The communication will be terminated. Disconnecting Communication Exiting the Internet browser may not terminate the connection. Perform the following steps to terminate the connection securely. For Windows Vista a Click the PC A screen indicating the connection status appears. the dial-up icon in the task tray of b Click "(Connect or disconnect)"
For Window XP/2000 The above screen will not be displayed. Follow the next procedure. Note
The communication speed shown on the PC screen may be different from the actual communication speed. 110 Configuring Network Manually Overseas Use International Roaming Service (WORLD WING) 112 Services Available Overseas 112 Before Using Overseas 113 Setting the Searching Method for Available Networks 115 Configuring Network 116 111 International Roaming Service
(WORLD WING) WORLD WING is DOCOMO's international roaming service that provides telephone and other types of communication services overseas out of the service area of FOMA network, using affiliated overseas network.
The following 3 types of communication are included in overseas network. 3G network A third generation mobile communication network complying with 3GPP Global standards. (3rd Generation Partnership Project) The local satandardization organization established for the development of common technical specifications related to 3rd Generation Mobile Communication Systems
(IMT-2000) Services Available Overseas Available communication services may vary depending on the overseas carrier or network. Available Communication Services Service Description Data Communication Available for data communication using packets communication. Sending and receiving SMS may be available in overseas. Please understand that communication fee is counted when sending SMS. Packet communication is not available for GSM network communication type. GSM (Global System for Mobile Communication) network The second generation mobile communication network in a digital communication system that is most widely used around the world. GPRS (3General Packet Radio Service) network GPRS is the 2.5 generation mobile communication system that enables high speed packet communication using GSM. It is available to use 3G network or GSM/GPRS network service within service area. For countries/areas support 3G850MHz/
GSM850MHz, it is also available to use.
Before using the FOMA terminal overseas, refer to the followings.
- "Mobile Phone User's Guide [International Services]"
- DOCOMO "International Service Web site"
112 Overseas Use Note
For details on available communication services while using international roaming, refer to Mobile Phone User's Guide [International Services] or visit DOCOMO
"International Service Web site".
Voice call or video telephony features are not supported by L-05A. Before Using Overseas STEP1Before Leaving Japan STEP2While Overseas STEP3After Coming Back to Japan Before Leaving Japan Before using the FOMA terminal overseas, refer to the followings.
"Mobile Phone User's Guide [International Services]"
"Mobile Phone User's Guide [Network Services]"
DOCOMO "International Service Web site"
Subscription
If you subscribed to the FOMA service after September 1, 2005, no separate subscription is required to use WORLD WING. If you subscribed to the FOMA service on or before August 31, 2005 and have not subscribed to WORLD WING, a separate subscription is required to use it.
A FOMA card (green/White) made available for WORLD WING must be inserted in the FOMA terminal. Power source and voltage in the country or region of stay
Countries and regions may have different power sources, voltages or power outlet shapes. Check these in the instruction manual for your PC or web sites of the PC manufacturer in advance. Network setup
You can change network setup from overseas.P116 Internet access
For overseas access points or settings for using the Internet overseas, contact your Internet service provider.
If you subscribe to mopera U, visit the mopera U web site. http://www.mopera.net/ (Japanese only) While Overseas Switching networks Searching for and connecting to an access point are performed automatically by default. No special settings are required. Main screen display area The name of the connected carrier can be viewed in the display area of the Main screen.P116 Note
You can manually switch networks if you want to connect to a particular network. See procedure 3 of "
(Configuring Networks)" (P116) Inquries overseas If your FOMA card (green/white) is lost or stolen overseas, contact DOCOMO immediately and temporarily suspend your subscription. For inquiry information, see "docomo Information Center" on the back of this manual. Call or data communication charge will still on you after the terminal was lost or stolen. Overseas Use 113 Country Codes for Major Countries Area Code Area Code U.S.A U.K. Italy India Indonesia Egypt Australia Austria Netherlands Canada Korea Greece Singapore Switzerland Sweden Spain Thailand Taiwan Tahiti Czech China Germany Turkey Japan New Caledonia New Zealand Norway Hungary Fiji Philippines Finland France Brazil Vietnam Peru Belgium Hong Kong Macau Malaysia Maldives Russia 49 90 81 687 64 47 36 679 63 358 33 55 84 51 32 852 853 60 960 7 1 44 39 91 62 20 61 43 31 1 82 30 65 41 46 34 66 886 689 420 86 International Access Codes for Major Countries (Table 1) Area Code Area Code Ireland U.S.A. U.A.E. U.K. Italy India Indonesia Australia Netherlands Canada Korea Greece Singapore Switzerland Sweden Spain Thailand Taiwan Czech China Denmark Germany Turkey New Zealand Norway Hungary Philippines Finland France Brazil Vietnam Belgium Poland Portugal Hong Kong Macau Malaysia Monaco Luxembourg Russia 00 011 00 00 00 00 001 0011 00 011 001 00 001 00 00 00 001 002 00 00 00 00 00 00 00 00 00 00 00 0021 0014 00 00 00 00 001 00 00 00 00 810 For country code or detailed information, refer to "Mobile Phone User's Guide [International Services]" or DOCOMO
"International Service Web site". For codes of other countries or details, visit DOCOMO
"International Service Web site". 114 Overseas Use International Phone Codes for Universal Number(Table 2) Area Code Area Code Ireland U.S.A. Argentina U.K. Israel Italy Australia Austria Netherlands Canada Korea Colombia Singapore Switzerland Sweden Spain Thailand 00 011 00 00 014 00 0011 00 00 011 001 009 001 00 00 00 001 Taiwan China Denmark Germany New Zealand Norway Hungary Philippines Finland France Brazil Belgium Portugal Hong Kong Malaysia South Africa Luxembourg 00 00 00 00 00 00 00 00 990 00 0021 00 00 001 00 09 00 For codes of other countries or details, visit DOCOMO
"International Service Web site". After Coming Back to Japan After coming back to Japan, the FOMA network will be connected automatically. If connection can not be established Set to "(Auto)" from "(Search Network )" of "(Configuring network)"
(P116) Setting the Searching Method for Available Networks Switching Carriers Manually The FOMA terminal is set to automatically find and switch to an available network in the country of stay by default. However, if you have a preferred network in the area or network cannot be found automatically, you can set to a network manually. For details, see "Configuring Networks"
(P116). Overseas Use 115 c Searching network
(Auto) Network can be searched automatically.
(Manual) Connect to the listed networks manually. If network search mode is set to "manual" overseas, reset to "Auto" after coming back to Japan. d Specify if display or hide the network information
(Display) The name of the network receiving current service is displayed on the screen.
(Hide) The name of the network receiving current service is not displayed on the screen. e Click the applicable
The information entered will not be set without clicking the applicable f Click Configuring Network
Allow you to configure network by L-05A connection software. a Click from the application option screen
(Application)
(Prior network)
(Application)
(Network Search)
(Application)
(Network Information) b Specify a "(Prior network)"
(Network priority order selection setting) 116 Overseas Use Note
How to manually configure network
- Select "(Manual)"
- The available network list will be displayed after searching.
- Select one from the available networks.
- Click
Network is not displayed in FOMA area when even if
"display" is set in network information.
Connecting to Internet or sending SMS may not be able to operate properly when network setting is changed manually.
While using OverseaP111
- When you are in roaming area and set FOMA terminal to automatically find and you can have automatic roaming service. If network can not be found automatically, select the available network service manually.
- Some communication services may not available depending on the overseas carrier or network. Overseas Use 117 Appendix/Troubleshooting AT Commands 120 AT Command List 121 Troubleshooting 130 Error Messages 132 Warranty and After-Sales Service 134 Updating software 135 Main specifications 136 Export Controls of the Product and Accessories 137 Intellectual Property Rights 139 Index 141 119 AT Commands AT commands are used to check the FOMA terminal function settings or status by using a PC. Usually, the communication software issues AT commands so you do not need to be concerned about them. Use AT commands if you want to control the FOMA terminal in your own way. Form of AT Commands AT commands should be entered on the Terminal Mode screen of the communication software. Use only single-
byte alphanumeric characters.
<Example>
ATD 99 3#
Hard Return Parameter: Content Command Name
An AT command must be entered on a single line including parameters (numbers and symbols) following the command. On the Terminal Mode screen of the communication software,"one line" is from the first character to the character before
. Note
In the Terminal mode, a PC functions as a communication terminal. Characters entered from the keyboard are sent to a line connected to a communication port. 120 Appendix/Troubleshooting AT Command List The following AT commands can be used on the L-05Amodem port.
[&F]A command to initialize settings used as AT&F command.
[?][=?]The current settings appear when adding?at the end of the command, and the effective range of the current settings appears when adding=?at the end of the command.
Command Overview Parameters/Description Comments Examples AT&C<n>
AT&F<n>
Select the operating conditions of the circuit CD for DTE Reset the FOMA terminal AT command set values to factory defaults If executed during a communication, the line is disconnected. n=0: Always keeps CD singal ON n=1 (default): CD changes depending on the other party's modem status. AT&C1 OK Only n=0 can be set (Skippable)
AT+CGDCONT [?] [=?] Set APN when sending Packet AT+CGEQMIN [?] [=?]
AT+CGEQREQ [?] [=?]
AT+CGMR communication. Register criteria value for determining if QoS (Quality of Service) sent from network when PPP Packet communication is established, is acceptable or not. Set QoS(Quality of Service) to request for the network when PPP Packet communication is established. Display the version of the AT+CGMR FOMA terminal. Refer to P128 Refer to P128 Refer to P128 Refer to P128 Refer to P128 Refer to P128
AT+CGMR 1234567890123 456 OK Appendix/Troubleshooting 121 Command AT+CGREG=<n>
[&F]
Set whether to be notified of the network registration status. Overview Parameters/Description n n=0(default): Do not note. n=1: Notify when outside and inside the service area is changed. ExecuteAT+CGREG?
then appears as
+CGREG:<n>,<state>
state 0:Not registered 1:Registered Home Network 4: Unknown 5: Registered (while roaming)
n=0: DisplayERROR n=1: Display in the form of +CMEE ERROR: xxxx(where xxxx are numbers) n=2(default): Display in the form of
+CMEE ERROR: xxxx(where xxxx are text) If using ATZ or AT&F command to default, "0" is setup. Note that when connecting L-05A to power, the value of ATZ or AT&F command differs. Comments Examples AT+CGREG?
+CGREG: 0,1 OK AT+CGREG=?
+CGREG: (0-2) OK AT+CGSN 12345678901 2345 OK AT+CMEE=0 OK AT+CMEE?
+CMEE: 0 OK AT+CMEE=?
+CMEE: (0, 1, 2) OK AT+CGSN Display the serial number of the FOMA terminal. AT+CMEE=<n>
[&F]
Set the error report form of the FOMA terminal. 122 Appendix/Troubleshooting Command Overview Parameters/Description AT+ CNUM Display the own number of the FOMA terminal AT+COPS=
<mode>,<format>
,<oper>,<stat>
Select and set carrier's name/Plmn Number.
ExecutingAT+CNUMdisplays in the form of+CNUM: <number>, <type>
number: phone number type=129: Excluding the international access code+
type=145: Including the international access code+
<mode>
0Auto (Searching network automatically and then change communication service) 1Manualto connect <oper>
communication service) 2Disconnection communication service Not supported 3Mapping don't excute. 4Auto manualIn case, to disconnect
<oper>communication service that excute automatically Not supported Comments Examples AT+CNUM
+CNUM:, 09080189242
,129 OK AT+COPS?
+COPS: 0,0,,2 OK AT+COPS=?
+COPS:2,,
,44010,2, 3,,, 44020,2,, 0,1,2,3,4, 0,1,2 OK
<format>
2Fixed number
<oper> represents country code(MCC) plus network code(MNC). 44010is displayed for MCC=440 and MNC=10 Appendix/Troubleshooting 123 Command Overview Parameters/Description AT+CPAS
Display FOMA terminal state AT+CPIN=PIN/
AT+CPIN=PUK PIN
Command to enter the PIN code or unblocking PIN code for FOMA card. AT+CUSD
[&F]
Inquire the change or setting contents of Internet configuration related to the extra service. Displays in the form of+CPAS : <n>. n=0: Available to set AT commands. n=3: Available and receiving n=4: Available and receiving Enter the PIN1 code for PIN, and enter unblocking PIN code for PUK. ExecutingAT+CPIN?displays
+CPIN: <n>. n=READY: Authenticated n=SIM PIN: Waiting for entry n=SIM PUK: Waiting for unblocking PIN1 code entry n=ERROR: Locked Form : AT+CUSD=<n>,"<str>"[,0]
n=0 : middle result Do not send <m>[<str>,<dcs>]
(default) n=1 : middle result Send <m>[<str>,<dcs>]
Middle result :
m=0 : setting finishes m=1 : information requirement from network exists. str :09
<str>""
Comments Examples AT+CPAS
+CPAS:0 OK AT+CPAS=?
+CPAS :0,3,4 OK
(+CPIN:SIM PIN status) AT+CPIN=
1234 OK
(+CPIN:SIM PUK status) AT+CPIN=
12345678, 1234 OK AT+CUSD=0,
"xxxxxxxxx"
OK AT+CUSD=1,"
1481 0000#",0
+CUSD:0,"148 7#",0 OK AT+CUSD=?
+CUSD: 0 OK AT+CUSD=?
+CUSD:(0-2) OK 124 Appendix/Troubleshooting Command Overview Parameters/Description ATDANTE Display the signal strength (number of antenna bars) of the FOMA terminal. AT+GCAP Display the capability list of the FOMA terminal. AT+GMI Display the manufacturer of the FOMA terminal. AT+GMM Display the name of the FOMA terminal. AT+GMR Display the s/w version of the FOMA terminal. Result format:
DANTE:<m>
m=0 Out of the service area m=1 : State of 0 or 1 antenna bar displayed m=2 : State of 2 antenna bars displayed m=3 : State of 3 antenna bars displayed
Comments Examples ATDANTE DANTE:3 OK AT+GCAP
+GCAP:
+CGSM,+DS,+ES OK AT+GMI LG Electronics Inc. OK AT+GMM FOMA L05A OK AT+GMR L05A-01-Vxxx-
440-10 OK Appendix/Troubleshooting 125 Command Overview Parameters/Description AT+IFC=<n>,<m>
[&F]
Set the local flow control method between the PC and the FOMA terminal. n : DCE by DTE control n=0 : No flow control. n=1 : Perform XON/XOFF control. n=2 (default): Perform RS/CS (RTS/
CTS) flow control. m : DTE by DCE control. m=0 : Perform No flow control. m=1: XON/XOFF control. m=2(default) : Perform RS/CS (RTS/
CTS) flow control AT+WS46=<n>
[&F]
Set the wireless network to be used by the FOMA terminal when dialing. 12: GSM 22: 3G (WCDMA) 25: GSM+3G (WCDMA) A/
ATD ATE<n>
[&F]
ATI<n>
Retry a command just before performing Sending packet Set whether to echo back the text sent from a PC. Display the recognition code 126 Appendix/Troubleshooting is not needed after entering command. Sending packetATD*99***
cid#
cid110 +
Display the APN that configured
+CGDCONT n=0 : Not echo back. n=1default) : Echo back. n=0 : Display [NTT DOCOMO]
n=1 : Display the name of the FOMA terminalSame as +GMM n=2 : Display the FOMA terminal version same as +GMR n=3 : Display OK n=4 : Display the details of communication functions of the FOMA terminal. Comments Examples AT+IFC=2, 2 OK AT+IFC?
+IFC: 2,2 OK AT+WS46?
25 OK A/
OK ATD*99***3#
CONNECT 7200000 ATE1 OK ATIO NTT DoCoMo OK Command Overview Parameters/Description ATS3=<n>
[&F] [?]
ATS4=<n>
[&F] [?]
ATS5=<n>
[&F] [?]
ATV<n>
[&F]
ATZ Set the return character (CR) to recognize the end of AT command text string. Set the line feed (LF) character. It is positioned next to the return character
(CR) if displaying the result code in alphanumeric characters. Set the back space (BS) character to delete the last character in the input buffer while AT commands are entered. Set the display method of the result code. Reset the settings on the FOMA terminal with the nonvolatile memory contents. If performed during a communication, the line is disconnected. n=13default : only n=13 can be specified. Only n=10 (default) can be specified. Only n=8 (default) can be specified. n=0 :Display in numeric characters. n=1(default): Display in text.
Comments Examples ATS3=13 OK ATS4=10 OK ATS5=8 OK ATV1 OK ATZ OK Appendix/Troubleshooting 127 Supplementary Explanation of AT Commands Command name+CGDCONT
Overview Set APN when sending packet connection.
Form
+CGDCONT=[<cid>[,<PDP type>[,<APN>]]]
Parameter descriptions Set the destination (APN) when sending packets. See the following examples for command operations.
<cid>1110
<PDP type>2PPP or IP
<APN>3Optional 1 <cid> is the number used to control the destination
(APN) for the packet communication to be registered in FOMA terminal. 1 to 10 can be registered. The default value of <cid>=1 is mopera.ne.jp and <cid>=3 is mopera.net. Set cid to 2 or a number between 4 and 10. 2 <PDP type> is a protocol for packet communication. 3 <APN> is optional string that indicates each destination.
Command examples Command to register an APN with the name of abc
(When PDP type is PPP, cid is 3 AT+CGDCONT=2,IP,abc OK
Operations without a parameter AT+CGDCONT=
Clear all the settings of <cid>. However, the setting of <cid>=1 or <cid>=3 is reset to the value when purchasing. AT+CGDCONT?Display the current settings. 128 Appendix/Troubleshooting Command name: +CGEQMIN=[Parameter]
Overview Register the threshold to accept the QoS (Quality of Service) sent from the network when packet communication is established.
Format
+CGEQMIN=<cid>[,,<Maximum bitrateUL>[,<Maximum bitrate DL>]]]
Parameter description
<cid>1110
<Maximum bitrate UL>2None (default)
<Maximum bitrate DL>2None (default) 1 <cid> is a number used to manage the access point
(APN) for the packet communication registered in the FOMA terminal. 2 <Maximum bitrate UL> and <Maximum bitrate DL>indicate the minimum communication speed [kbps] of upload and download traffic respectively between the FOMA terminal and the base station. If these are set to None (default), all speeds are permissible. Be aware that a packet communication may not be established because any other speed than this is not permissible.
Command examples
(1) Command to permit all speeds for both upload and download (When cid=2) AT+CGEQMIN=2 OK
(2) Command to permit only 5,700kbps for upload and 7,232kbps for download (When cid=2) AT+CGEQMIN=2,,5700,7232 OK
(3) Command to permit 5,700kbps for upload and all speeds for download (When cid=2) AT+CGEQMIN=2,,5700 OK
(4) Command to permit all speeds for upload and only 7,232kbps for download (When cid=4) AT+CGEQMIN=4,,,7232 OK
Operations without a parameter AT+CGEQMIN=Reset all <cid> to their defaults. AT+CGEQMIN=<cid>Reset the specified <cid> to its default. Command name: +CGEQREQ=[Parameter]
Overview Set the QoS (Quality of Service) requested to the network when packet communication is dialed.
Format
+CGEQREQ=[<cid>[,,<Maximum bitrate UL>[,<Maximum bitrate DL>]]]
Parameter description
<cid>1110
<Maximum bitrate UL>2None (default)
<Maximum bitrate DL>2None (default) 1 <cid> is a number used to manage the access point
(APN) for the packet communication registered in the FOMA terminal. 2 <Maximum bitrate UL> and <Maximum bitrate DL>indicate the minimum communication speed [kbps] of upload and download traffic respectively between the FOMA terminal and the base station. If these are set to None (default), all speeds are permissible. Be aware that a packet communication may not be established because any other speed than this is not permissible.
Operations without a parameter AT+CGEQREQ=Reset all <cid> to their defaults AT+CGEQREQ=<cid>Set the specified <cid> as default. Note
This command, (+CGDCONT, +CGEQMIN, + CGEQREQ) is not reset by [&F] and [Z], either. Result Codes List of result codes Numeric display Text display Description 0 1 3 4 OK CONNECT NO CARRIER ERROR Operation performed properly Connected to other party Line disconnected Unable to accept command
Command example Command to require 5,700kbps for upload and 7,232kbps for download (When cid=2) AT+CGEQREQ=2,2,5700,7232 OK Appendix/Troubleshooting 129 Troubleshooting First, check whether software is required to update. Update software if necessary. (Updating SoftwareP135) Contact General Inquiries specified by DOCOMO located in
"Repairs" at the last page of the manual if the symptom is not improved after confirming the check box. The FOMA terminal is not recognized Symptom FOMA terminal is not recognized Check Reinsert the FOMA terminal all the way into the USB port securely. Verify the L-05A Communication Configuration Files (Drivers) for the FOMA terminal functioning properly.P35, P42 Communication may fail and the FOMA terminal cannot be properly recognized and functioned, if the PC is started up or restarted with the FOMA terminal FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. When connecting the FOMA terminal with a USB port, if data communication is not available without being recognzied, double click the "DOCOMO" icon recognized as a CD drive or start "L-05A connection software" or
"DOCOMO connection manager" to recognize the FOMA terminal as a modem. The FOMA card will not be able to use if PIN1 unlock code is wrongly entered 10 times in a low. For further information, visit DOCOMO shop. 130 Appendix/Troubleshooting Communication problems Symptom Communications are not possible Check Verify that signals are received in the service area. In the setting of Send Caller ID does not conform to the provider's instructions, communication may not be performed. P74, P90 Check if you set the FOMA Card Setting to PIN1 unblocking.P69 If set to (PIN1 Lock), launch the L-05A connection software, then change FOMA card setting to PIN1 unblocking.P71 Check the property settings of the modem and the registration of the destination (APN) Problems with AT Commands Symptom
[ERROR]
appears when a command is entered
[OK] does not appear after an AT command is entered. Check Verify that you entered a correct ATcommand. Check the properties of the terminal software to see whether a device other than the FOMA terminal is selected Check the L-05A Communication Configuration Files (Drivers) have been installed and functioned properly. Verify that the commands start with "AT" or
"at". Other problems Symptom The terminal stopped working suddenly The FOMA terminal is not detected if it is inserted into a USB port while installing the L-05A Communication Configuration Files (Drivers). Check Verify that the FOMA CARD is properly inserted to FOMA terminal.P19 Your PC operating environments may have changed because a new peripheral or software was installed. Make a confirmation with manufacturer or maker of accessory or software. Please confirm the followings.
Whether the PC or OS you are using is in the latest condition?
(If required, apply revision program of OS or a maker.)
Whether the FOMA terminal recognizes normally when other USB devices are inserted into the USB port?
Whether the FOMA terminal operates normally when being inserted into another PC?
Whether the FOMA terminal operates normally when being reset to its default?
For inquiries related to OS or PC, contact Microsoft or PC manufactures. Internet connection speed decreased significantly Inserting FOMA terminal directly to a PC may result in deterioration of performance depending on the type of PC, specification and degree of electromagnetic interference. Deterioration of performance may occur to the service areas where W-CDMA/HSDPA/
GSM network are unstable. In this case, move to other area and try to connect again. Appendix/Troubleshooting 131 Error Messages Error Messages
PINPIN FOMA FOMA FOMA PIN1 PIN1 blockedPIN1 PIN1/3 PIN1PIN1 0123456789 PIN148 Description You are out of service area or available network. You may be out of service area or available network, or network error. Please do network setting again. Communication may fail and the FOMA terminal cannot be properly recognized if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. Contact DOCOMO shop if the same problems persist. You cannot customize setting during data communication. Try again after closing data communication. Two of new PIN1 are not identical each other. New PIN1 you want to change is not matched to the PIN1 you entered for verification purpose. Enter correct PIN1. Make sure to insert FOMA card into FOMA terminal before inserting to a PC. Do not remove FOMA card while using FOMA terminal. Verify the FOMA terminal is properly inserted into a PC. Verify that the FOMA terminal is properly recognized by the PC. An incorrect PIN1wasimproperly entered 3 times in a row. Available functions will be limited. Enter PIN unblocking code to unlock. An incorrect PIN1 code has been entered. Enter the correct PIN1 code again You can use 0,1,2,3,4,5,6,7,8,9 as a valid PIN1 code. Others are invalid. Valid PIN1 code is from 4 to 8 digit. 132 Appendix/Troubleshooting Error Messages PIN1PIN PIN/
10 SMS PIN1 FOMA FOMAFOMA To change the PIN1, PIN must be locked. Switch PIN unblocking to PIN blocking. Description An incorrect PIN was imporperly entered 10 times in a row. Available functions will be limited. Please enter the contact unblocking PIN code You may be out of service or available network.You may encounter problems due to the network error. You are no longer able to use FOMA card that PIN unblocking code has been improperly entered10 times in a row. Please contact DOCOMO shop. Communication may fail and the FOMA terminal cannot be properly recognized, if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. When no data transmission has been incurred for a certain period of time. Communication will be resumed when data transmission is incurred, so stay as it is. Appendix/Troubleshooting 133 Replacement parts Basically, replacement parts (parts required to maintain product function) will be kept in stock for at least 4 years after termination of production. Please note that the product may not be repaired even during this period, depending on the malfunctioning parts due to a shortage of those parts. Depending on the nature of the required repairs, it may still be possible to repair your terminal even after this period. Contact Repairs listed on the back of this manual. Updating software Download the modification file of FOMA terminal from download site on the Internet and then update the software. If software update is necessary, you will be informed at the DOCOMO web site with "
Information". Pay attention Note
Do not modify the FOMA terminal, the FOMA card or its accessories.
- Fire, injury or damage may result.
- If the FOMA terminal is modified (part replacement, modification, painting, etc.), it will be repaired only after the modified parts have been restored to the condition at the time of purchase. However, repair may be refused depending on the nature of modification. Using sticker to decorate the FOMA terminal. Exchanging the packing with those other than DOCOMO product.
- Repair of failures or damage caused by modification are charged even during the warranty period.
Do not unplug the FOMA terminal with the computer during software update.
Software update (downloading and rewriting) may take a while. If software update fails, all operations become unavailable. In this case, bring your FOMA terminal to a DOCOMO service center.
Do not remove any inscription stickers attached to the FOMA terminal. The inscription stickers certify that the FOMA terminal satisfies specific technical standards. If stickers are removed intentionally or are reattached in such a way that confirmation of the sticker's contents is impossible, repair or servicing may be refused because confirmation of whether or not the device conforms to relevant technical standards cannot be made. Appendix/Troubleshooting 135 Power source Power voltage DC5V5%(Supplied from PC) Max Current consumption Max Current consumption while communicating 3G: Approx. 550mA or below GSM/GPRS: Approx. 300mA or below Average Current consumption while communicating 3G: Approx. 180mA or below GSM/GPRS: Approx. 170mA or below Average Current consumption while Standby:
3G: Approx. 90mA or below GSM/GPRS: Approx. 90mA or below Depending on the usage, power consumption fluctuates. Form factor USB connection type Dimensions Height: approx. 80mm Width: approx. 32mm Depth: approx. 13mm Weight Approx. 37g Main specifications Operation system Windows 2000 Professional Japanese version
(Service Pack 4 or later) Windows XP Home Edition Japanese version
(Service Pack 2 or later) Windows XP Professional Japanese version
(Service Pack 2 or later) Windows Vista 32 bit Japanese version (Service Pack1 or later) Windows Vista 64 bit Japanese version (Service Pack1 or later) Mac OS X 10.4.11 Japanese version Mac OS X 10.5.6 Japanese version Communication Speed Packet Communication:
Maximum receiving: 7.2MbpsBest effort Maximum sending: 5.7MbpsBest effort The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending is theoretical values and does not show the actual ones.The actual communication speed depends on communication environment and network congestion. Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps Operating environment Temperature535 Humidity45%85%
136 Appendix/Troubleshooting Export Controls of the Product and Accessories Japan Export Control Regulations (Foreign Exchange and Foreign Trade Law and relevant laws and regulations) and U.S. Reexport Regulations (Export Administration Regulations: EAR) apply to this product and its accessories. If you export or re-export this product or its accessories, please follow the necessary procedures at your own risk and expense. For details on the procedures, contact the Ministry of Economy, Trade and Industry or the U.S. Department of Commerce. European Union Directives Conformance Statement Hereby, LG Electronics, Inc. declares that this product is in compliance with:
The essential requirements and other relevant provisions of Directive 1999/5/EC
All other relevant EU Directives 0168 The above gives an example of a typical Product Approval Number. FCC Regulations Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Appendix/Troubleshooting 137 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:
This device & its accessories may not cause harmful interference.
This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This device has been tested for typical body-worn operations with the distance of 0.19inches (0.5cm) from the user's body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.19inches(0.5cm) must be maintained from the user's body. Consumer Information on SAR (Specific Absorption Rate) THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications 'Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the device transmitting at its highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 138 Appendix/Troubleshooting Before a device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., worn on the body) as required by the FCC for each model. The highest SAR value for this device when worn on the body is 1.17W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Gant section of http://
www.fcc.gov/ after searching on FCC ID BEJL05A. Additional information about Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. Intellectual Property Rights Copyrights and Rights of Portrait Without permission of the copyright owner you may not duplicate, modify, transmit over public communication lines, etc. any document, image, music, software, or other content owned by a third party that you have used this product to download from an Internet web site, etc., except for private uses such as duplication and indexing that are allowed by copyright law. Appendix/Troubleshooting 139
1 2 | Users Manual 1 | Users Manual | 3.16 MiB |
Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:
(1) This device & its accessories may not cause harmful interference.
(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This Mobile Broadband USB Modem, model L-05A, is approved for use in normal size laptop computers only (typically with 12" or larger display screens). To comply with FCC RF exposure requirements, this modem should not be used in configurations that cannot maintain at least 5mm (approximately 0.2 inches) from users and bystanders, and 12mm (approximately 0.47 inches) from the top of the USB modem. This USB modem has been tested for compliance with FCC/IC RF exposure limits in the laptop computer(s) configurations with horizontal and vertical USB slots and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. This USB modem must not be used with any other antenna or transmitter that has not been approved to operate in conjunction with this modem. DOCOMO W-CDMA GSM/GPRS System Thank You for Purchasing theData Commu-
nication Device L-05A Before or while using the L-05A, be sure to thoroughly read this manual and the individual manual for other operation devices to ensure its correct use. For further information, contact the "docomo Information Center" on the back of this manual. The L-05A is designed to be your close partner. Treat it carefully at all times to ensure longterm performance.
DOCOMO is not responsible for any economic losses incurred through lost communication opportunities caused by external factors such as malfunction or failure of the FOMA terminal, or electrical outage.
The FOMA terminal can be operated in FOMA Plus-Areas and FOMA HIGH-SPEED Areas.
The FOMA terminal can be used only via the FOMA network provided by DOCOMO and DOCOMO's roaming area.
This FOMA terminal does not support i-mode functions (i-mode mail, connection to official i-mode sites or i-ppli, etc.) For Those Who Use the FOMA Terminal for the First Time Before Using the FOMA Terminal Because the FOMA terminal uses radio waves, it may not function in locations where it is difficult for radio waves to penetrate, such as tunnels, underground passages and some buildings in areas where radio wave signals are weak or out of the service area. Even when you are on a higher floor of a tall building or condominium and nothing blocks your view outside, the FOMA terminal may not be able to receive or transmit signals. Also communication may be interrupted even when the Antenna Indication Lamp on the FOMA terminal lights green indicating a strong signal reception with 3 antenna indication bar.
Use the FOMA terminal in ways that do not disturb others in public places, crowded locations, or quiet locations.
The FOMA terminal communicates via radio waves by converting voices into digital signals. If you move into an area where signal reception is poor, the digital signals may not be accurately decoded and what you hear may differ slightly from what was actually said. If this is the first time for you to use the FOMA terminal, it is recommended that you read this manual in the following order to learn basic operations. 1. Learning the precautions. P7 2. Learning the names of parts and functions of the FOMA terminal. P18 3. Inserting the FOMA terminal into a PC . P24 4. Having the FOMA terminal recognized by your PC. P24 5. Setting up the FOMA terminal for communication. P66 The latest version of this manual can be downloaded from the DOCOMO web site. The URL of PDF for Instruction Manual http://www.nttdocomo.co.jp/english/support/manual/
index.html The URL and the information contained in the manual are subject to change without prior notice. How to Read/Refer to This Manual Contents L-05A Manual is composed ofL-05A Instruction ManualConnection Guideand L-05A INSTRUCTION MANUAL
(included CD-ROM)(this manual) recorded in CD-ROM. L-05A Instruction ManualConnection Guide The following contents such as connection to computer, troubleshooting methods, specifications of L-05A are written.
Contents/Precautions
Before Using the FOMA Terminal
Setting up
Appendix/Troubleshooting L-05A INSTRUCTION MANUAL (included CD-ROM)this manual Besides the above contents described inL-05A Instruction ManualConnection Guide, the contents of configuring communication through special application are also written. This manual is supplied with PDF. To view this manual, Adobe Reader (Version6.0 or later is recommended) is necessary.
L-05A Connection Software
DOCOMO Connection Manager
Configuring Network Manually
Overseas Use 1 How to Refer to This Manual This manual offers you the following methods to easily find a page describing functions or services you want to know about. See next page for detailed descriptions From the Index P141 Search from the index when you know the names of functions or services. From the Tabs on the Cover Front cover Search functions or services from the index tabs printed on the front cover. From the Contents Search from the contents that categorize functions. From the Main Features P5 P6 Search from the features when you want to use specific functions. Please understand thatL-05A Manual refers to theL-05Aas theFOMA Terminal. This manual describes, some steps and screens may differ depending on your operating environment. Reprinting all or parts of this manual is prohibited. Information contained in this manual is subject to change without prior notice. 2 A way to find a destination page is explained with an example of installing L-05A connection software on Windows
(including a driver). From the Index
P141 Search or a function name or a service name as shown below. From the Index Tabs on the Front Cover
Front cover Search for the function in the order of "Front cover"
"Chapter title page"
"Target page" as shown below. P35 The page describing installation of L-05A connection software on Windows
(including a driver)"
3 Displays a section title. Useful Information or suggestions relating to an operation. The above page is an example. Screen images and illustrations contained in this manual are for reference only. They may differ from those seen for the actual product. 4 Explains Operation steps A key screen for an operation step. This is an image of a screen seen on the PC. Numbers, settings or characters entered are for reference only. Index:
Searching each chapter is available. Contents How to Read/Refer to This Manual 1 Contents 5 Features of the L-05A 6 Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) 7 Handling and Care 12 Purchased Product and Accessories 15 Before Using the FOMA Terminal 17 Setting Up 31 L-05A Connection Software 49 DOCOMO Connection Manager 77 Names of Parts and Functions Using FOMA Card Available Communications Connecting FOMA Terminal with a PC Setting Up Windows version Macintosh version L-05A Connection Software Using Packet Communication Using SMS Using Phonebook Using Application Option DOCOMO Connection Manager Windows version Macintosh version Configuring Network Manually 89 Overseas Use 111 Appendix/
Trouble-
shooting 119 Configuring Dial-up Network Manually Conducting Communication
(Connecting Dial-up) International Roaming Service
(WORLD WING) Services Available Overseas Confirming before Using Overseas Setting the Searching Method for Available Networks Configuring Network AT Commands AT Command List Troubleshooting Error Messages Warranty and After-Sales Service Software update Main Specifications Export Controls of the Product and Accessories Intellectual Property Rights Index Contents/Precautions 5 FOMA (Freedom Of Mobile multimedia Access) is the name of a service provided by DOCOMO based on the W-CDMA system, which is certified as one of the global standards of 3rd generation mobile communication systems (IMT-2000). Features of the L-05A Correspondence with the FOMA HIGH-SPEED Area International Roaming Service You can enjoy high speed communication (Best effort systemat a maximum of 7.2Mbps for receiving and 5.7Mbps for sending.
The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending are theoretical values and they do not show the actual performance.
Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps.
The actual communication speed varies depending on surrounding communication conditions and network condition.
DOCOMO offers Internet connection services, such as mopera U. For details, visit the mopera U web site http://www.mopera.net/ (Japanese only) The packet communication in FOMA HIGHSPEED area, the amount of send/receive data is expected to increase. Note that the communication fees may become high. Communications are available from a PC even in foreign countries that have adapted the W-CDMA (3G) network system or GPRS network.P112 If you subscribed to the FOMA service after September 1, 2005, a separate subscription is not required. However, if you unsubscribed to the FOMA service subscription or canceled the service, a separate subscription is required. If you initially subscribed to the FOMA service before August 31, 2005, and have not subscribed to "WORLD WING", a separate subscription is required. This service is not available with some billing plans. FOMA Card Interchangeability The same FOMA card can be used in more than one FOMA terminal.P19 SMS Feature Allows you to send and receive SMS by using L-05A Connection Software P54 6 Contents/Precautions The following symbols indicate special warnings regarding product usage. Denotes things not to do (prohibition). Not disassembly Not liquids Denotes not to disassemble. Denotes not to use where it could get wet. Denotes mandatory instructions
(matters that must be complied with).
"Safety Precautions" are explained in the following 4 sections. General Precautions for the FOMA Terminal and FOMA Card 8 Precautions for the FOMA Terminal 9 Precautions for the FOMA Card 10 Notes on Using near Electronic Medical Equipment 11 Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) Before using your FOMA terminal, read these Safety Precautionscarefully so that you can use it properly. After reading the safety precautions, keep this manual in a safe place for later reference. These precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property. The signs below indicate the levels of danger or damage that may occur if the particular precautions are not observed . DANGER WARNING CAUTION This sign indicates that incorrect handling has a high possibility of causing death or serious injury. This sign indicates that incorrect handling poses a risk of causing death or serious injury. This sign indicates that incorrect handling poses a risk of causing injury or damage to the product or property. Contents/Precautions 7 General Precautions for the FOMA Terminal and FOMA Card Do not use or leave the FOMA terminal and FOMA card in places with a high temperature such as in cars under the blazing sun. Deformation, malfunction heating or the deterioration of performance may result. Also, part of the case could get heated, causing bare skin burns. Not disassembly Not liquids Do not disassemble Disassemble, remodel or solder the terminal and FOMA card. Fire, injury, electric shock or malfunction may result. Do not let FOMA terminal and FOMA card get wet. Contact with water or other liquids may cause heating, electric shock, fire, malfunction or injury. Take care not to use the terminal and FOMA card in areas where they could get wet. WARNING Do not put the FOMA terminal or FOMA card in microwave ovens or other heating. The FOMA terminal may over heat, smoke or catch fire, or its circuit parts may burst. Do not throw the FOMA terminal or FOMA card, or subject them to severe shocks. Malfunction or fire may result. Be careful not to let electro conductive materials (metal pieces, pencil leads etc.) contact with the connector terminal. Also, make sure that these are not entered into the inside of the FOMA terminal. Fire or other malfunctions may result from a short circuit. Make sure you have the power of the computer which is connected with FOMA terminal switched off before you go near a flammable gas such as gasoline fumes. Using the terminal in such an environment may result in a fire. 8 Contents/Precautions CAUTION Do not place the FOMA terminal or FOMA card on unstable locations such as wobbly tables or slanted locations. The FOMA terminal or FOMA card may fall, resulting in injury or malfunction. Do not store the FOMA terminal or FOMA card in humid or dusty places, or in hot areas. Malfunction may result. If children use the FOMA terminal or FOMA card, a guardian should explain the precautions and correct operations. The guardian should also make sure that the instructions are followed during use. Injury may result. Keep out of reach of babies and infants. Accidental swallowing or injury may result. Precautions for the FOMA Terminal WARNING Do not put the FOMA terminal in the place where it could be affected by an expanded airbag, e.g. on the dashboard. If the airbag expands, the FOMA terminal could hit you and others, causing accidents such as injury and the FOMA terminal could get malfunction or damaged. Do not place the terminal in breast or inner pocket when electronic medical equipment is near by. Using FOMA terminal closed to electronic medical equipment may result malfunction. Do not allow liquids such as water, or foreign materials such as metal pieces or flammable materials to get into the FOMA card opening in the FOMA terminal. Fire, electronic shock or malfunction may result. Contents/Precautions 9 Turn off the FOMA terminal in places where use is prohibited such as airplanes or hospitals. Electronic and electronic medical appliances may be adversely affected. For use inside medical facilities, make sure that you comply with their regulations. Remove FOMA terminal from the USB port in places near high-precision electronic devices or devices using weak electronic signals. The FOMA terminal may possibly cause these devices to malfunction. Electronic devices that may be affected Hearing aids, implanted cardiac pacemakers, implanted defibrillators, other medical electronic devices, fire alarms, automatic doors and other automatically controlled devices. If you are using an implanted cardiac pace maker, implanted defibrillator or any other electronic medical device, consult the manufacturer or retailer of the device for advice regarding possible effects from radio waves. CAUTION Electronic devices in some types of cars can be affected by use of the FOMA terminal. For safety's sake, do not use the FOMA terminal inside such cars. Itching, rash or eczema may be caused depending on your physical conditions or predisposition. If an abnormality occurs, stop using the FOMA terminal immediately, and then seek medical attention. Metal(chrome plating) is used to the following parts. Parts that are used: USB connector Precautions for the FOMA Card CAUTION Be careful when removing the FOMA card(IC portion). Your hands or fingers may be injured. 10 Contents/Precautions Notes on Using near Electronic Medical Equipment The description below meets Guideline on the Use of Radio-communication Equipment such as Cellular Telephones - Safeguards for Electronic Medical Equipment by the Electromagnetic Compatibility Conference. WARNING Be sure to adhere to the following regulations inside medical facilities. Keep the FOMA terminal out of operating rooms, intensive care units (ICUs) or coronary care units (CCUs). Turn off the PC in hospital wards. Turn off the PC in hospital lobbies and corridors if electrical medical devices could be nearby. If the medical facility has specific zones where use or possession of mobile terminals is prohibited, follow those regulations. If the function which automatically turns on the power is set, cancel the setting before turning off your PC. Turn off the PC in crowded trains or other public places where implanted cardiac pacemaker or defibrillator wearers could be nearby. Signals from the FOMA terminal may affect the operation of implanted cardiac pacemakers or defibrillators. If you use an implanted cardiac pacemaker or implanted defibrillator, use the mobile terminal 22cm or more away from the implanted cardiac pacemaker or implanted defibrillator. Operation of an implanted cardiac pacemaker or implanted defibrillator may be affected by radio waves. Patients using electronic medical equipment other than implanted cardiac pacemakers or implanted defibrillators
(using outside medical facilities for treatment at home, etc.) should check the influence of radio waves upon the equipment by consulting the manufacturer. Operation of electronic medical equipment may be affected by radio waves. Contents/Precautions 11 Handling and Care General Usage Guidelines Keep the FOMA terminal away from water. The FOMA terminal and FOMA card are not waterproof. Do not use the terminal in places with high humidity such as a bath or where rain may get it wet. If you carry the card close to your body, moisture from sweat may corrode the internal parts causing a malfunction. Note that malfunctions deemed to be caused by water are not covered by the warranty, and may be impossible to repair. Since these malfunctions are not under warranty, even when repair is possible, it will be done at the user's expense. Clean the FOMA terminal with a dry, soft cloth
(Lens cleaning cloth). If the FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing may disappear or color may fade. Keep the connector contacts clean with a dry, soft cloth. Dirty contacts can result in intermittent connections. Do not place the equipment near air conditioner outlets. Condensation may form due to rapid changes in temperature, and this may corrode internal parts and cause malfunction. Do not place the FOMA terminal where excessive force will be applied to it. If FOMA terminal is inserted to a full bag, or placed in a pocket and sat on, its internal PCBs may be damaged or malfunction. Such damage is not covered by warranty. Read the individual manual attached to the FOMA terminal. FOMA Terminal Avoid using in extremely high or low temperatures. The FOMA terminal should be used within a temperature range from 5 C to 35 C and a humidity range from 45 % to 85 %. FOMA terminal may affect fixed phones, televisions or radios in use nearby. Use as far as possible from such appliances. Keep a separate record of any information stored on the FOMA terminal and store the copies in a safe location. DOCOMO assumes no responsibility for the loss of any of your data. 12 Contents/Precautions Remove the FOMA terminal from the PC when transporting. Malfunction or damage may result. It is normal for the FOMA terminal to become warm during use. You can continue to use it even when it is warm. Take care not to drop the FOMA terminal when removing the FOMA terminal from the carrying case. When it is not in use, keep the FOMA terminal in its carrying case to keep the connector contacts clean. Dirty contacts may result in intermittent connections. When putting the FOMA terminal in carrying case, keep it away from wet or high temperature place. Pay attention not to put excessive force on the FOMA terminal. Transformation, tarnish, color staining may result. FOMA Card Do not put excessive force on the FOMA card when inserting or removing it into the FOMA terminal. It is normal for the FOMA card to become warm during use. You can continue to use it even when it is warm. Always keep the IC portion of the FOMA card clean. Clean the FOMA card with a soft, dry cloth (Lens cleaning cloth). Be sure to keep a separate note of the information registered to the FOMA terminal. DOCOMO is not responsible for any losses of registered information. Visit DOCOMO shop to return the FOMA card for the environmental purpose. Avoid extreme temperature. Do not scratch, touch carelessly or short circuit the IC portion. Data loss or malfunction may result. Do not drop or give shock to the FOMA card . Malfunction may result. Do not bend or put heavy things on the FOMA card. Malfunction may result. Do not insert UIM into the FOMA terminal with labels or stickers attached on. Contents/Precautions 13 CAUTION Do not use the modified FOMA terminal. Using modified FOMA terminal result in violating the law of Electromagnetic Compatibility. FOMA terminal has been complied with technical standard of wireless equipment stipulated by law of Electromagnetic Compatibility. As for the proof, the technical standard compliance mark, is indicated in the inscription seal. If FOMA terminal is modified by turning the screw to the left to disassemble, technical standard compliance becomes invalid. Please do not use FOMA terminal during the time when technical standard compliance is being invalid, since you are in violation of the law of Electromagnetic Compatibility. 14 Contents/Precautions Purchased Product and Accessories L-05A Terminal (With Rear Cover L13, Warranty) L-05A CD-ROM L-05A Instruction ManualConnection Guide Carrying Case (Sample)
L-05A Connection Software (For Windows/Macintosh
DOCOMO Connection Manager (For Windows/Macintosh
L-05A INSTRUCTION MANUALPDF Software specifications are subject to change without prior notice. USB Extension Cable (Sample) Use when "USB Extension Cable" is written in this manual. Mounting folder (Sample) Use when "A mounting Folder" is written in this manual. Contents/Precautions 15 Before Using the FOMA Terminal Names of Parts and Functions 18 Using a FOMA Card 19 Available Communications 23 Connecting FOMA Terminal to a PC 24 17 Names of Parts and Functions b c d a a USB ConnectorP25 Connection contacts to a PC. Pull out from the FOMA terminal and use. The tip part of the USB connector is able to turn 90 degree. However, only one direction is available to turn. b Antenna Part The antenna is inside the FOMA terminal. c PWR LampP19 Indicates the power supply conditions. d IDLE/BUSY LampP19 Indicates the FOMA terminal status. 18 Before Using the FOMA Terminal Examples of a Ex. 1:
Ex. 2:
Mode Indication Lamp Operation indicating lamp FOMA Terminal Status When powered on Waiting to connect to the FOMA network a b Using a FOMA Card The FOMA card is an IC card that stores personal information such as your phone number. Without a FOMA card installed in the FOMA terminal, you cannot use data communication. For detailed information, refer to FOMA Card Manual. Inserting/Removing Inserting aPower Indication Lamp bMode Indication Lamp
Green Green Inserting the UIM with two hands. a While pushing the cover in the direction of a, slide the rear cover in the direction of b. Lift the cover as shown by c. Packet communication SMS PIN Attempting to communicate Communicating While receiving Opening SMS Sending SMS PIN Lock Waiting to unlock PIN1 Green Green Green
(Flash) Green Green Green Green Blue
(Flash) Blue Green Green Green
a b c R Rear Cover Before Using the FOMA Terminal 19 b Insert the UIM into slot at the direction of arrow with the IC chip side down IC is faced FOMA card Notch FOMA card slot c Fit the rear cover to the ditch of FOMA terminal at approximately 3mm from the top tip of the FOMA terminal. While pressing along direction b, slide the rear cover along direction a till hear rear cover clicked. Removing Remove the UIM with two hands. a While pushing the cover in the direction of a, slide the rear cover in the direction of b. Lift the cover as shown by c. a b c Rear Cover b Slide the UIM in the direction of arrow and remove it from the FOMA Card slot. ab Approx.3mm FOMA card 20 Before Using the FOMA Terminal c Fit the rear cover to the ditch of FOMA terminal at approximately 3mm from the top tip of the FOMA terminal. While pressing along direction b, slide the rear cover along direction a till hear rear cover clicked. ab Approx.3mm Note
Make sure not lose the removed FOMA card.
Make sure to check the direction of FOMA card. IC
Be careful not to scratch FOMA card's IC parts.
Inserting FOMA card in the reverse direction may cause malfunction. Inserting and removing FOMA card with an excessive force may cause damage to your FOMA card.
Do not remove FOMA card while FOMA terminal is inserted to a PC, it may causes damage to your FOMA card. PIN1 Code You can set PIN codes (Personal Identification Number) for FOMA Card. The default setting for the PIN1 code is
"0000". The PIN1 code is a 4 to 8-digit security code to be entered every time the FOMA terminal is turned on for user verification to prevent any unauthorized use by others. If your FOMA card is set to require a PIN1 code, data communication cannot be performed until the PIN1 is entered. Start the L-05A High Speed Utility and verify the PIN1 code, or set (P69)not to verify the PIN1 code in advance. Changing the PIN1 Code You can change the PIN1 code to any number. To prevent any unauthorized use by third parties, change it to your own number. If you improperly enter the PIN1 code 3 times in a row, further entry is locked automatically (PIN lock), so be sure to keep a separate note of the numbers you set.
Entering PIN1 Code/ Changing PIN1 codeP70 PIN Unblocking Code The PIN Unblocking Code is the number used to unblock the PIN1 code. You are notified of your PIN Unblocking Code when you purchase your FOMA terminal. Entering the Unblocking Code (8-digit) unblocks the PIN lock. If you improperly enter the Unblocking Code 10 times in a row, the FOMA card locks automatically, so be sure to keep a separate note of the number. Before Using the FOMA Terminal 21 Start up L-05A Connection Software The PIN1 code Verification screen appears Enter PIN1 Code Incorrect entry 3 times in a row Enter Unblocking PIN Code OK Incorrect entry 10 times in a row You can set a new PIN1 code Contact a DOCOMO shop 22 Before Using the FOMA Terminal FOMA Card Types Please be aware that the FOMA card (Blue) has different functions from the FOMA card (Green/White) as follows:
FOMA card
(Green/White) Up to 20 digits Up to 26 digits FOMA card Function
(Blue) This terminal allows up to 20 digits. The number of digits of a phone number that can be saved to the FOMA card Phonebook WORLD WING Not available Available WORLD WING WORLD WING is DOCOMO's FOMA international roaming service that provides telephone and other types of mobile communications. It allows the subscriber to use the same phone number overseas as in Japan by inserting a FOMA card(green/white) into a FOMA terminal or a mobile phone designed for overseas use.
If you subscribed to the FOMA service after September 1, 2005, a separate subscription is not required. However, if you unsubscribed to the FOMA service subscription or canceled the service, a separate subscription is required. If you initially subscribed to the FOMA service before August 31, 2005 and have not subscribed to "WORLD WING", a separate subscription is required.
This service is not available with some billing plans.
Your FOMA card (green/white) is lost or stolen overseas, contact DOCOMO immediately and temporarily suspend your subscription. For contact information, see "docomo Information Center" on the back of this manual. Call and communication charges after the terminal was lost or stolen are still charged to you. Note
Communication fees become high when performing communications with large amount of data such as browsing websites with many graphics or downloading data.
Data communication fees under international roaming differ from those in Japan.
FOMA terminal does not support 64K data communication.
This FOMA terminal does not support Remote Wakeup.
This FOMA terminal does not support FAX communication. Available Communications Packet Communication Fees for this communication method are based on the amount of exchanged data. You can perform data communication at a maximum of 7.2Mbps for receiving and 5.7Mbps for transmitting by using a connection that allows FOMA communication such as mopera U, one of DOCOMO's Internet connection services. The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending is theoretical values and does not show the actual ones. The actual communication speed depends on communication environment and network congestion.
You can perform communication using international roaming undermopera U
Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps.
The communication speed varies depending on the access point and radio wave status.
The communication speed varies depending on the access point under international roaming.
Use theDOCOMO Connection Managerin the CD-ROM to check the approximate number of transmission bytes and charges under the communication. Before Using the FOMA Terminal 23 Usage Notes Internet service provider fees Fees to an Internet service provider may be required to connect to the Internet. These fees are added to the FOMA service fees and are paid to your Internet service provider directly. For details on connection fees, contact your Internet service provider. You can subscribe to such asmopera U, one of DOCOMO's Internet connection services. Charge for subscribing mopera U is required. For service and connection/settings of mopera, visit themopera web site. http://www.mopera.net/mopera/index.html (Japanese only) User authentication to access networks Depending on the access point, user authentication (ID and password) may be required to connect. If required, enter the ID and password from the dial-up network. The ID and password will be provided by the network administrator of your Internet service provider or the access point. For details, contact your provider or access point network administrator. Connecting FOMA Terminal to a PC When connecting FOMA terminal with computer for the first time, it is required to install L-05A connection software (including a driver). For installing L-05A connection software, refer to the followings.
For Windows: "Preparation for using L-05A" (P35)
For Macintosh: "Preparation for using L-05A" (P42) Inserting a Turn on a PC b Connecting the FOMA terminal with a PC When using a mounting folder and a USB extension cable
Use a mounting folder and a USB extension cable to fix on the top of a PC Requirements for packet communication The following conditions must be met to perform communications using the FOMA terminal. However, a connection may not be established if traffic is heavy at the base station or if radio signals are weak.
The FOMA terminal must be in a FOMA network or DOCOMO's roaming service area.
The access point corresponds to the FOMA packet communication. 24 Before Using the FOMA Terminal aPull out the projection part of USB connector 180 degree by fingertip cPut the FOMA terminal between the mounting folder and fix on the top of the PC Projection part bHold the connector part of USB extension cable and insert into the USB connector near the FOMA terminal along arrow direction USB connector Mounting folder PC dHold the connector part of USB cable and insert into PC USB port along arrow direction USB extension cable USB port USB extension cable Before Using the FOMA Terminal 25 When connecting with a PC directly
Insert the FOMA terminal into a PC USB port and use it directly.
The USB connector of FOMA terminal is able to turn 90 degree complying to directions of USB port aPull out the projection part of USB connector 90 degree by fingertip Projection part USB connector bThe FOMA terminal body turn the tip part of USB connector 90 degree as shown in the illustration cInsert the USB connector of FOMA terminal into a PC USB port USB connector USB port It is available to use without turning USB connector 90 degree as the above-mentioned procedure b.
USB connector USB port Note
Refrain from turning the FOMA terminal after inserting USB connector into PC USB port. Malfunction or damage may result when subject the FOMA terminal to severe shocks due to carelessness. 26 Before Using the FOMA Terminal c Start communication connecting Note Power Indication lamp Mode Indication Lamp
Confirm whether power indication lamp changes to red and mode indication lamp changes to green.
Using "L-05A connection software"P49
Using "DOCOMO connection manager"P77
Configuring manually (OS Standard)P89 Removing a End data communication
If the L-05A connection software/DOCOMO connection manager is already running, exit the L-05A connection software/DOCOMO connection manager. Verify that data connection is disconnected. b Remove the FOMA terminal When using a mounting folder and a USB extension cable aHold the connector part of a USB extension cable and pull out the FOMA terminal from PC USB port along arrow direction USB port USB extension cable Before Using the FOMA Terminal 27 bRemove the FOMA terminal along with the mounting folder from the top of the PC. Remove the mounting folder from the FOMA terminal dPack the USB connector into the FOMA terminal Mounting folder PC USB connector When connecting to a PC directly aHold the USB connector part of FOMA terminal. Pull out the FOMA terminal straightly from PC USB port cHold the connector part of the USB extension cable and pull out from the USB connector near the FOMA terminal along arrow direction USB connector USB port USB connector USB extension cable 28 Before Using the FOMA Terminal bTurn the tip part of the USB connector 90 degree as shown in the illustration USB connector cPack the USB connector into FOMA terminal USB connector Caution
If you force to remove FOMA terminal and pull out the USB extension cable, this may result malfunction.
Removing FOMA terminal from USB connector during data communication may suspend data communication and result malfunction or data losses. Before Using the FOMA Terminal 29 Setting up Setting up 32 Windows Version 35 Macintosh Version 42 31 Setting up Data communication with L-05A
"Communication configuration file (Driver)" and "L-05A connection software" are required to install for a PC to recognize the FOMA terminal. "Communication configuration file (Driver)" will be installed along with "L-05A connection software". Although data communication is available with only L-05A connection software, if necessary using it after installing DOCOMO connection manager in addition is also available. Data communication is also available based on configuring manually after installing L-05A connection software. Installation of L-05A connection software Since L-05A has zero installation, when connecting the FOMA terminal to a PC for the first time, "L-05A connection software" installation screen appears automatically. "Zero installation" is supported by the PC with Windows OS in it. If zero installation works improperly, install L-05A connection software with the included CD-ROM. In addition, although Macintosh does not support the zero installation feature, installation continues through the CD-
ROM icon appears when connecting the FOMA terminal to a PC. The procedure of setting up is described on the next page. 32 Setting up Work Flow of Setting up Connecting the FOMA terminal with a PC Windows VersionP35 Macintosh VersionP42 Preparing the included CD-ROM Windows VersionP38 Macintosh VersionP45 Installing L-05A connection software (Driver) Windows VersionP39/ Macintosh VersionP45 Confirmation after Setup Using L-05A connection software Using DOCOMO connection manager Configuring manually(Only Windows) Operation configurations of L-05A connection softwareP66 Installing DOCOMO connection manager Windows VersionP79 Macintosh VersionP83 Communication configuring manuallyP90 Communication connection with L-05A connection softwareP50 Operatino configuration/communication connection with DOCOMO connection manager
DOCOMO connection manager manual Communication configuring manually with OS functionP109 Setting up 33 1 DOCOMO does not guarantee the operation under the supported OS of the OS is changed through update. 2 Required memory or available hard disk space may vary depending on the system environment of a PC. 3 Only Mac with CPU made by Intel Corporation is available. For latest information of operation environment, visit DOCOMO's "international web site"
Note
The software may not work depending on the operating system environment. DOCOMO does not guarantee any operation other than the environment operation described on the left side. Operating Environments Using this FOMA terminal under the following operational environments. Item PC Main Unit Requirement
Available CD-ROM drive to use from PC-AT compatible.
USB port (Comply with Universal Serial Bus Specification Rev1.1/2.0)
DOCOMO is not responsible for any incompatibility of the operation performed through the USB Hub (including USB port available from the monitor, keyboard, etc.)
Display resolution of 800600 pixels, High Color (65.536) or higher is recommended. OS1 Required Memory2 Hard Disk Space2 Windows 2000 SP4 or later (Japanese versions) Windows XP SP2 or later (Japanese versions) Windows Vista SP1 or later (Japanese versions) Mac OS X 10.4.11 (Japanese versions)3 Mac OS X 10.5.6 (Japanese versions)3 Windows 2000 : 64Mbytes or more Windows XP : 128Mbytes or more Windows Vista : 512Mbytes or more Mac OS X 10.4.11512Mbytes or more Mac OS X 10.5.6512Mbytes or more 50Mbytes or more available space 34 Setting up Windows Version The L-05A connection software only need to be installed when you connect the FOMA terminal to your PC for the first time. Note
Do not remove the FOMA terminal while installing.
Installation may take several minutes depending on the PC you use.
Do not install or uninstall during data communication.
When installing, make sure to install from the account with PC supervisor privileges. An error will occur during installation if you install from the account without these privileges.
For details on setting up PC supervisor privileges, contact your computer manufacturer or Microsoft Corporation. Preparation for Using L-05A Setting Zero Installation (Auto) For Windows Vista a Connect the FOMA terminal with a PC The setup screen of L-05A connection software is automatically displayed by zero installation.
"" screen will be displayed depending on setting.If the screen is displayed, check "
" and select "Launcher.exe"
np When the Setting up screen of L-05A connection software is not automatically displayed, install with the included CD-ROM (P38) Setting up 35 d Click " (I Agree)"
Installation starts. e Click "(Next)"
b Click "(Allow)" on "
(User account control)" screen For Windows XP/2000
Because "(User account control)"
screen is not displayed, follow the next step c Click "(Next)"
36 Setting up f Click [OK]
g Click "(Finish)"
h Confirm whether the FOMA terminal is recognized by PC On the lower right side of task tray, "
(Device driver software is being installed)" message is displayed, and the FOMA terminal is recognized automatically. If the FOMA terminal is recognized properly, "
(The device is ready for use)" message is displayed. Installation of L-05A communication configuration file
(Driver) continues. Setting up 37 For Windows XP
On the lower right side of task tray, "
(A new hardware has been found.)"
message is displayed, and the FOMA terminal is recognized automatically.
If the FOMA terminal is recognized properly, "
(A new hardware has been installed and ready for use.)"
message is displayed. For Windows 2000
The warning screen of removing device is displayed which has nothing to do with using continually.
"(A new hardware has been found.)" message is displayed, and the FOMA terminal is recognized automatically. Setting Manually (CD) For Windows Vista a After starting a PCInsert the included CD-
ROM into the PC b "(Start)""(All programs)""(Accessory)"Click
"(Specify a file name and run)"
For Windows XP/2000 Click [(Start)]
(Specify a file) c Enter "<CD-ROM>:Windows L-05A StartCD.exe" in "
(Name)" Click "OK"
"" screen will be displayed depending on setting.If the screen is displayed, check "
" and select "Launcher.exe"
d Perform the same operations as those after step 2 or later on "Setting Zero Installation
(Auto) (P36)"
38 Setting up Confirmation after Installation Confirming L-05A Connection Software a Double click L-05A connection software icon When the following screen is displayed, the confirmation of installation finishes. Confirming the Installed L-05A Configuration File
(Drivers) Confirm whether L-05A Communication Configuration File
(Drivers) is set in a PC. For Windows Vista a Click
"(Start)""
(Control panel)""
(System and maintenance)""
(Device manager)""(Continue)"
For Windows XP Click "(Start)""(Control panel)""(Performance and maintenance)""(System)""
(Device manager)" of "(Hardware)"
tab For Windows 2000 Click "(Start)""(Settings)""
(Control panel)""(System)""
(Device manager)" of "(Hardware)"
tab Setting up 39 b Click each device display to confirm the driver name installed
Confirm whether the driver name is displayed below "
(COM LPT)(Port (COM and LPT))", "(Modem)"
Note
If FOMA terminal is not recognized through the PC's USB port, try other available USB port. FOMA terminal may not be recognized properly with some USB port of PC.
When communicating data with L-05A connection software, application operation of L-05A is required. P66
When communicating data with DOCOMO connection manager without L-05A connection software, installation of DOCOMO connection manager is required.P79
When communicating data with neither L-05A connection software nor DOCOMO connection manager, configure it manually.P90
COM port number differs depending on user and PC. Device name Port
(COM and LPT) Modem Driver name FOMA L05A USB Serial1 Device FOMA L05A USB Serial2 Device FOMA L05A 40 Setting up Uninstalling L-05A Connection Software
(including a driver)
Before uninstalling, remove the FOMA terminal from the PC.
When uninstalling, make sure to install from the account with PC supervisor privileges.
Make sure to save important data in FOMA card. Uninstallation will results in data loss when Phonebook or SMS data is saved in PC. For Windows Vista a
"(Start)"" (All programs)""L-05A (L-05A connection software)"Click "Uninstall"
For Windows XP
" (Start)"" (All programs)"
"L-05A (L-05A connection software)"Click
"Uninstall"
For Windows 2000
" (Start)"" (Program)""L-05A
(L-05A connection software)"Click "Uninstall"
b Click "(Allow)" on "
(User account control)" screen If "(Cancel)" is clicked, uninstallation will be stopped. For Windows XP/2000
Since " (User account control)"
screen is not displayed, follow the next procedure. c Click " (Uninstall)"
d Click [OK]
Setting up 41 Macintosh Version When installing L-05A connection software, make sure to finish " (DOCOMO connection manager)" first. Note
Do not remove the FOMA terminal while installing.
When installing, make sure to install from the account with PC supervisor privileges. Preparation for Using L-05A Setting Zero Installation (Auto) a Connect the FOMA terminal with a Mac CD-ROM icon is displayed on the desktop. b Double click the CD-ROM icon e Click [OK]
f Click " (Finish)"
Uninstallation finishes. 42 Setting up c Double click "L-05A
.mpkg (L-05A connection software installer.mpkg)"
e Click " (Continue)"
d Click " (Continue)"
f Confirm " (The license agreement)". If agree with the content, click
" (I Agree)"
Setting up 43 g Click " (Install)"
i Click "(Continue installing)"
h Enter administrator passwordClick "OK"
j Click "(Restart)"
Mac restarts. Installation finishes. 44 Setting up Setting Manually (CD) a Start MacInsert the CD-ROM into Mac b Double click CD-ROM icon"Mac""L-05A CD-ROM icon on desktop appears. connection software"
c For subsequent steps, operate the same procedures as those after procedure 3 in "Set Zero Installation (Auto)" (P43) Confirmation after Installation Confirming L-05A Connection Software a Double click L-05A connection software icon When the following screen is displayed, the confirmation of installation finishes. Note
When communicating data with L-05A connection software, setting application operations of L-05A is required.P66
When communicating data with DOCOMO connection manager without L-05A connection software, installation of DOCOMO connection manager is required.P79 Setting up 45 Uninstalling L-05A Connection Software
(including a driver)
Before uninstalling, remove the FOMA terminal from the Mac.
When uninstalling, make sure to install from the account with PC supervisor privileges.
Make sure to save important data in FOMA card. Uninstallation will results in data loss when Phonebook or SMS data is saved in PC.
End "DOCOMO connection manager" when uninstalling L-05A connection software. Insert the included CD-ROM into a Mac CD-ROM icon is displayed on the desktop. a b Double click the CD-ROM icon c Double click "Mac"
d Double click "L-05A (L-05A connection software)"
e Double click ".app
(Uninstaller.app)"
46 Setting up f Click "(Uninstall)"
g Enter administrator password Click "OK"
h Confirm whether the FOMA terminal is connected to USB port before restarting i Click "(Restart)"
Mac restarts. Uninstallation finishes. Setting up 47 L-05A Connection Software L-05A Connection Software 50 Using Packet Communication 53 Using SMS 54 Using Phonebook 63 Using Application Option 66 L-05A connection software is available to use on either Windows or Macintosh. Despite the display images of Windows version and Macintosh version are a little different, icons on the screen and available functions are same. Please note that in this chapter the descriptions are based on screen images of Windows. 49 L-05A Connection Software The L-05A connection software allows you to use packet communication/SMS/Phonebook. Using Packet CommunicationP53 Allows you to easily use packet communication. Launching and Exiting Connection Software (For Windows) Launching
Double click Exiting created on the desktop.
Click located on the top of main application screen. Using SMSP54 Features of composing messages, Inbox, Outbox, Drafts box and Saving to FOMA card are available. Using PhonebookP63 Features of composing messages, adding and deleting new group, transferring group, adding new item, modifying user, delection are available. Using Application OptionP66 Confirm the amount of packet communication data usage, configure internet option, configure FOMA card, enter PIN1 code, configure the connection type (PDP), reset FOMA terminal, configure network are available. Note
Data of L-05A connection software will be saved in PC if no destination is specified. 50 L-05A Connection Software Launching and Exiting Connection Software (For Macintosh) If connect with L-05A, it will be recognized as a CD-ROM first. For recognizing as a modem, drug the CD-ROM icon into trash. Launching
Launch "Finder" "(Application)" "L-05A
.app (L-05A connection software.app)"
Exiting
Menu bar "L-05A (L-05A connection software)"
"L-05A (Quit L-05A connection software)"
Main Application Screen
(Out of service area) In no signal reception area Internet Connection International Roaming Unopened message found 1 W-CDMA (3G) A third generation mobile communication network complying with 3GPP Global standards. 3Gpp means 3rd Generation Partnership Project. The local standardization organization established for the development of common technical specifications related to 3rd Generation Mobile Communication Systems (IMT-2000). 2 HSDPA (Short for High Speed Downlink Packet Access) HSUPA (Short for High Speed Uplink Packet Access) A high speed type of W-CDMA data communication. It is called
"3.5G" since it is the improvement version of 3rd generation
(3G) cell phone (W-CDMA). 3 GSM (Short for Global System for Mobile Communication) The second generation mobile communication network in a digital communication system that is most widely used around the world. 4 GPRS (Short for General Packet Radio Service) GPRS is the 2.5 generation mobile communication system that enables highspeed packet communication using GSM. a b c d e f a List of icon indicating FOMA terminal status Signal reception level Strong Weak Network type W-CDMA1, HSDPA2, HSUPA2, GSM3/GPRS4 L-05A Connection Software 51 b StatusMessage display area
FOMA terminal,warning messages, operation status, network name.
The information of currently accessed network operator is displayed when "network information" is set to "display"P116 f Current time/data display area
Current date and time are displayed.
Time is set conformable to PC time. Confirming My Number Click will see the following messages displayed. from the main application screen, and then you Version information My number c Buttons for connecting and disconnecting to Internet
Click this button when connecting or disconnecting Internet. d Data communication information display area
During connecting to Internet, connection time and amount of loaded data are displayed. e Operation button
Buttons are available for SMS, Phonebook, Settings and Information.
: SMSP54
: (Phonebook)P63
: (Settings)P66
:(Information) P51 52 L-05A Connection Software Using Packet Communication You can use packet communication if click main application screen. from the Start Packet Communication a Click from the main application screen
Displays connection time, amount of downloaded data connection status icon
. Disconnecting to Packet Communication a Click from the main application screen
Packet communication will be disconnected after the messages displayed "(Connection is being disconnected)". Note
The packet communication may be automatically
disconnected depending on the network status or location. In packet communication, fees apply on the amount of sent/received data. Note that the communication fees may become high if you perform heavy communications such as by browsing websites which include large multimediacontents or if you download a lot of data.
Data communication fees under international roaming differ from those in Japan. L-05A Connection Software 53 Using SMS Allows you to use various SMS features if click the main application screen.
Maximum number of SMS stored in PC is 1000. Depending on PC's available hard disk space, number may differ. (Excluding FOMA card SMS box) from When Receiving SMS The following screen appears when receiving SMS. a Click Composing SMS a Click from the SMS application screen b Enter the SMS from the SMS composing screen
SMS can be entered up to 70 characters (English alphabet
& numeric characters can be entered up to 160 characters) Composing SMS Transferring to phonebook Entering receiver's phone number Message/receiversreset, sending SMS Composing SMS Outbox Inbox Drafts box FOMA card SMS box 54 L-05A Connection Software c Enter the receiver's phone number
Enter the receiver's phone number by clicking the input or click to display phonebook and decide a receiver.
If you edit SMS or receiver, enter directly in SMS edit screen or phone number field to modify. Note
You will be prompted whether you want to save the SMS to Drafts box or not, when moving to other applications or when failure incurred in transmission. If you click
, the SMS will be saved to Drafts box. If you click , SMS will not be saved to Drafts box. the d Click
SMS are being sent.
Result of sending SMS.
Setting "SMS(Multi-refuse SMS)"
By using the following AT command, SMS is set in terminal software. For details of terminal software, refer to "
(Configuring Network Manually)" P90 SMS refuse: AT+CUSD=1,"*141*1#",15 Unlock SMS refuse: AT+CUSD=1,"*141#",15 L-05A Connection Software 55 Inbox
Allows you to store SMS to Inbox. Confirming SMS from Inbox a Click
Displays the list of received SMS. from the SMS application screen Replying and Forwarding SMS from Inbox a Click b Select the reply/forward from Inbox list from SMS application screen Click
"(Reply)/(Forward)" menu is displayed b Select and confirm the SMS from the SMS list
: SMS opened
: SMS unopened
"(Reply)" Receiver phone number is automatically entered and move to the SMS composing screen.
"(Forward)" SMS to be sent are automatically entered, and move to the SMS composing screen. The receiver phone number is required to enter. Receiver phone number Browse phonebook application screen P64 c Click Note
The SMS status becomes opened once you click the received SMS. 56 L-05A Connection Software Copying Inbox SMS to FOMA Card a Click b Select the SMS and right-clickClick "FOMA from SMS application screen
(Save to FOMA card)"
Outbox
Allows you to store SMS in Outbox. Confirming SMS from Outbox a Click
Displays the list of sent SMS. from SMS application screen
"FOMA(Save to FOMA card)": Copy the received SMS of PC to FOMA card.
You can copy 20 SMS in total including sent and received to your FOMA card. b Select and confirm the SMS from the list Deleting SMS from Inbox a Click b Select the SMS to delete from the list of from SMS application screen InboxClick
"(Delete)""(Delete all)" menu displayed
"(Delete)"
"(Delete all)" Delete all SMS The message for confirming is displayed. Delete the selected SMS. c Click Sent SMS Receiver's phone number Browse phonebook application screen P64 L-05A Connection Software 57 Editing SMS from Outbox a Click from SMS application screen b Select the SMS to send from the list of OutboxClick
SMS composing screen Copying SMS from Inbox to FOMA Card a Click b Select the SMS and right clickClick "FOMA from SMS application screen
(Save to FOMA card)"
You will be prompted with SMS composing screen as soon as the receiver phone number and SMS are entered.
You can add or edit SMS and receiver phone number. c Click
"FOMA(Save to FOMA card)" Copy sent SMS stored in a PC to FOMA card.
Up to 20 received and sent SMS can be stored in FOMA card. Note
The information of time will not be saved when SMS are copied from Inbox to FOMA card. 58 L-05A Connection Software Deleting SMS from Outbox a Click b Select the SMS to delete from the list of from SMS application screen InboxClick
"(Delete)""(Delete all)" menu is displayed.
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click Drafts Box
Allows you store temporary SMS in Drafts box. Confirming SMS from Drafts box a Click from SMS application screen
The list of SMS from Drafts box will be displayed. b Select and confirm the SMS from the list of Drafts box L-05A Connection Software 59 FOMA Card SMS Box
Allows you to save SMS copied from Inbox or Outbox are to FOMA card SMS box.
Up to 20 received and sent SMS can be stored in FOMA card. Confirming SMS from FOMA Card SMS Box from SMS application screen a Click
The list of SMS from Drafts box will be displayed. b Select and confirm the SMS from the FOMA card SMS box
:Received SMS
(SMS unopened)
:Received SMS
(SMS opened)
:Sent SMS Editing from Drafts Box a Click b Select the SMS to edit from the list of drafts from SMS application screen boxClick
You will be prompted with SMS composing screen as soon as the receiver's phone number and SMS are entered.
You can add or edit SMS and receiver's phone number. c Click Deleting SMS from Drafts box a Click b Select the SMS to delete from the list of from SMS application screen drafts boxClick
"(Delete)" and " (Delete all)" menu is displayed.
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click 60 L-05A Connection Software Replying and Forwarding SMS from FOMA Card SMS Box a Click b Select the SMS to reply/forward from the list from SMS application screen of FOMA card SMS boxClick
"(Reply)""(Forward)" menu is displayed. Deleting SMS from FOMA Card SMS box a Click b Select the SMS to delete from the list of from SMS application screen FOMA card SMS boxClick
"(Delete)""(Delete all)" menu is displayed.
"(Reply)"
You will be prompted with SMS composing screen as soon as the receiptor's phone number and SMS are entered.
"(Forward)" The SMS to be sent will be automatically entered, and move to SMS composing screen. The receiver's phone number is required to enter. c Click
"(Delete)"
"(Delete all)" Delete all SMS. The message for confirming is displayed. Delete the selected SMS. c Click L-05A Connection Software 61 Saving SMS in FOMA Card SMS Box to PC a Click from SMS application screen b Select the SMS to save from the list of FOMA card SMS boxRight click c Click "(Save to PC)"
d Click 62 L-05A Connection Software Sending SMS from Phonebook a Select the phonebook record to send b Click from the phonebook application
Receiver's phone number is automatically entered and move to the SMS composing screen. c Click d Click Note
Refert to "SMS (Composing SMS)" to enter the SMS.P54 Sending SMS from Japan to Overseas SMS
You can use the same mobile phone number overseas as is
used in Japan. If receiptor's terminal is FOMA terminal Enter "+", and
"country code", in front of receiptor's phone number, if receiptor is subscribed to overseas carrier other than NTT DOCOMO. Also, enter the "010" "Country code" "Receiptor's mobile phone number" in order. (If receiptor's phone number starts with "0", enter the phone number without "0"
If the receiptor received unsupported characters of SMS from the sender who subscribed to other overseas carrier, the message may not be displayed properly. Using Phonebook Click allows you to use various features of phonebook. The list of stored phonebook records are displayed when Phonebook records are stored in FOMA card.
Total number of phonebook records to be stored may be different depending on PC's available hard disk space. Total number of phonebook records stored in FOMA card is maximum 50.
:Phonebook record stored in FOMA card
:Phone number stored in PC
:Composing SMS
:Adding and deleting new group
:Transferring group
:New record
:Editing record
:Delete L-05A Connection Software 63 Adding Phonebook Record
Follow the steps to add new phonebook record from the Phonebook application a Click b Start the following operations Select a group Enter the name to be added Enter the phonebook to be added Searching Phonebook Record a Enter the name to be searched
You can search phonebook record by entering phone number. b Click Editing Phonebook Record a Select the phonebook record to be edited
You can enter Kanji, Hiragana, Katakana, English, number, character. (Full-width 10 character. Half-width 21character). You can enter the 20 character length. c Click
Save entered information to phonebook. Not save entered information to phonebook. d Click 64 L-05A Connection Software b Click from the phonebook application
Edit phonebook record number if editing screen appears. c Click
Save entered information to phonebook. Not save entered information to phonebook. d Click Deleting Phonebook Record a Select phonebook record to delete b Click from the phonebook application Adding New Group a Click b Enter the group name to be added from the phonebook application
You can enter Kanji, Hiragana, Katakana, English, number, character. (Full-width 20character , Half-width 20character). Delete phonebook record. Cancel deleting phonebook record.
Note
If you have many phonebook record to delete, multi-select phonebook records by using shift or Ctrl keys from key board and then click delete button to delete the selected phonebook record. c Click d Click L-05A Connection Software 65 from the phonebook application Deleting Group Name a Click b Select the group name to be deleted c Click d Click Note
"(Default)" group and "FOMA (FOMA card)"
group can not be deleted. Phonebook Record Transfering Other Group a Select the phonebook record to be transferred b Click from the phonebook application c Select the group name to be transferred d Click
Transfer the selected phonebook record to the group you want to transfer to. Note
If selecting two or more record, select records by using Shift or Ctrl keys and then click "(Transfer)" to collectively transfer. 66 L-05A Connection Software Using Application Option Click option by clicking from the main application screen. allows you to use various features of application Amount of downloaded data Internet option FOMA card Connection configuration FOMA terminal reset Network setup The following s are required to connect Internet with L-05A connection software. a The setting of provider information Register APN with other registration number (<cid>) on
"(Connection type configuration)" screen.
(P72) b Basic setting Configure "*99***<cid>#" as a dial number during packet communication on "Basic setting (Internet Option)"
screen. Also configure "User name", "Passward" provided by provider if required. Based on the above preparations, the APN with registration number entered in <cid> will be connected to. Confirming Packet Communication Volume
Confirms that the amount of data transmission used in packet communication a Click from the application option screen.
(Total usage) 1 (Monthly usage)
(Current usage)
(Total usage) Accumulated total data usage Initialize total usage to zero 1(Monthly usage) Monthly usage Initialize monthly usage to zero data usage of current session Note
The data usage displayed on the screen may differ from the actual volume of packet communication. Configuring Internet Option
Allows you to configure basic settingsfor connecting to Internet. from the application option screen a Click b Start the following operations
(ID)
(Password)
(Service number)
(Configuration) SMS
(SMS center number)
(Configuration)
(Basic setting reset) L-05A Connection Software 67
1 2 | Users Manual 2 | Users Manual | 3.75 MiB |
(ID) ID supplied from service provider
(Password) The password supplied from service provider
(Service number) number of service provider For packet communication, enter *99***<cid>. Enter the registration number of APN set in <cid>(P72). SMS(SMS center number) Normally, change in setting is not necessary. Enter SMS center number when using SMS from the network operator other than DOCOMO.
(Configuration) Click to change setting
(Basic setting reset) Click to return to basic setting c Click the applicable Note Configuring FOMA Card
Allows you to configure "PIN1(PIN1 lock)", "PIN1
(PIN1 unblocking)", "PIN1 (PIN1code change)"
a Click from the application option PIN1
(PIN1 Mode) PIN1
Click
"(Configuration)" to renew the setting. Always remember to click when setting is changed.
You will not connect to Internet if ID, password and service number are incorrect.
SMS may not be sent or received when SMS service
number has been improperly entered. In Macintosh, input any character in user name and passward. 68 L-05A Connection Software Locking PIN1
Set security to FOMA card. a Select "PIN1(PIN1 locking)" from PIN1 mode b Enter the PIN1 code configured in FOMA card to "PIN1"
Unblocking PIN1 a Select "PIN1(Unblocking PIN1)" from PIN mode b Enter the PIN1 code configured in FOMA card to "PIN1"
c Click d Click Note
When starting L-05A connection software with PIN1 locked, you need to enter PIN1 code from the screen of entering PIN1 code.You can not use FOMA terminal properly unless you enter correct PIN1 code. c Click d Click Note
If PIN1 unblocking code is set, you can use FOMA card information from FOMA terminal without verifying PIN1 code. L-05A Connection Software 69 d Enter the PIN1 code entered in "PIN1
(New PIN1code)" code in "
(Confirming New PIN 1code)"again to verify e Click f Click Modifying PIN1 Code
Set the password required when unlocking or locking PIN1.
Changing PIN1 code is only available when PIN is locked. a Select "PIN1(Changing password of PIN1)" from PIN1 mode PIN1 (PIN1 Mode) PIN1 (PIN1 Code) PIN1
(Current PIN1 Code) PIN1
(PIN1 Code to change) PIN1
(Confirming PIN1 Code to change) b Enter the FOMA card PIN1 code to "PIN1"
c Enter the PIN1 code change in "PIN1
(New PIN1 code)"
70 L-05A Connection Software Entering PIN1 Code
When L-05A connection software is started after setting PIN1 Lock, PIN1 code input screen will appear or it is restart to reset FOMA terminal.
a Enter PIN1code Enter the 4 to 8 PIN1 code Ex.3 When PIN1 code has been improperly entered 3 times in a row. If you improperly enter the PIN1 code 3 times in a row, the verification screen for unblocking PIN1 code will be displayed. Unblocking locked PIN1 code a Enter the unblocking PIN1 code to "PIN1
(Unblock)"
code)" to change b Enter the PIN1 code to "PIN1(New PIN1 c Enter the PIN1 entered in "PIN1(New PIN1 code)" in "(confirming New PIN1 code)" to confirm d Click b Verify the result after entering PIN1 code Ex.1 When PIN1 code has been successfully entered. Ex.2 When PIN1 code has been improperly entered. L-05A Connection Software 71 Caution
Be careful not to lose FOMA card. DOCOMO is not responsible for the lost or stolen device.
Do not transfer FOMA card to others.
Treat it carefully as the data stored in FOMA card can be easily damaged from scratching or bending.
When connecting FOMA terminal to a PC for the first time,
you are required to enter PIN1 code to use FOMA card. If an incorrect PIN1 code is entered 3 times in a row, the service will be suspended. To use it again, you must enter unblocking PIN1 code. If an incorrect unblocking PIN1 code is entered 10 times in a row, FOMA card locks automatically, so be sure to keep a separate note of the number. Contact a DOCOMO shop if you are not able to unblock the locked PIN 1. Configuring Connection type (PDP Type)
Configure connection type. from Internet Option screen a Click b Start the following operations a
(Registration number (cid)) b (Connection type) c
(Access Point Name (APN)) d
(Connection type registration) e
(Connection type setting reset) a (Registration Number(cid)) The registration numbers are available from cid1 to cid 10 in FOMA terminal. To connect to a provider other than mopera Uor mopera, you can set the access point name (APN) to any of cid2 or cid4 to cid10. b (Connection type) PDP type IP and PDP type PPP are available for Internet connection type. You can select the Internet connection type you want to use or check the currently configured internet connection type. 72 L-05A Connection Software c (Access Point Name (APN)) Configure APN for packet communication. You can configure APN of provider you want to use or check the currently configured APN. Connection type registration Save the modified information to FOMA terminal. Connection type setting reset d e Reset all PDP configurations. b Select the Internet connection type supporting Access Point. Saving and Editing the Provider Information
Save or edit the provider information you want to use. a Select cidSelect the registration number to save/edit cid The registration numbers are available from cid1 to cid 10 in FOMA terminal.
To connect to a provider other thanmopera Uor mopera, you can set the access point name (APN) to any of cid2 or cid4 to cid10. Registration numbercid 1 2 3 Access Point nameAPN mopera.ne.jpmopera Unassigned mopera.netmopera U 410 Unassigned c Enter APN
When "cid=3"selected "PDP type IP" Configure mopera.net This service provides a maximum data speed of 7.2Mbps for receiving and 5.7Mbps for sending.
When "cid=1" selected "PDP type PPP" onfigure mopera.ne.jp This service provides a maximum data speed of 384kbps for receiving and 384kbps for sending. L-05A Connection Software 73 Note Configuring sender ID You can configure to display sender ID or not by adding 186/184 before APN.
Add "186." before APN if you want to display sender ID.
Add "184." before APN if you don't want to display sender. Resetting FOMA Terminal
Allows you to reset FOMA terminal. a Click from the application option Registration Display sender ID Not display Sender ID APN 186.mopera.net 184.mopera.net d Click
Click FOMA
(FOMA terminal reset) Retrieving Provider Information aIf select the cid of the "(Registration Number(cid))" b"(connection type)" and c"
(Access Point Name (APN))"will be displayed. FOMA(FOMA terminal reset) Reset FOMA terminal for the following cases
When FOMA terminal is operating improperly.
When FOMA card is reinserted while inserting the FOMA terminal to a PC. 74 L-05A Connection Software b Click
FOMA terminal is restarting. L-05A Connection Software 75 DOCOMO Connection Manager DOCOMO Connection Manager Windows Version Macintosh Version 78 79 83 77 This manual introduces the installation method of DOCOMO connection manager. For connecting the terminal with Internet, agreement with the Internet service provider (mopera U etc.) supporting service and data communication is required. View DOCOMO web site for detailed information (Japanese only). Note Using a flat-rate data plan
For using a flat-rate data plan, the agreement with the charge plan corresponding to the flat-rate data communication and internet service provider is required. View DOCOMO web site for further information. Using measured-rate data communication
Note that the communication fees may come high if you perform heavy packet communications such as viewing home page with pictures inside, downloading data (Ex. Application/Music/Data/OS/anti-virus software update) etc. Note that when performing data communication after connecting this FOMA terminal with a PC by a USB cable,
(Pake-hodai) (Pake-
hodaifull)Biz (Biz-hodai) andBiz
(Biz-hodai double) are not included in the FOMA packet Flat-rate service. Using mopera
For connection configuration, view mopera web site. http://www.mopera.net/mopera/support/index.html
(Japanese only) DOCOMO Connection Manager DOCOMO connection manager is a software packets the necessary connection software to operate "
(Flat-rate data plan connection software)" and measured data communication which are necessary when using flat-rate data plan. DOCOMO connection manageris a software to connect data communication terminal by data communication correponding terminal. Subscribing mopera Uor configuring a PC operates easily. Also, confirming amount of data communication and charges through charge counter feature is available. Charge counter Windows version Macintosh version Connect/disconnect 78 DOCOMO Connection Manager Windows Version Before Installing DOCOMO Connection Manager Setting Internet Explorer Before installing this software, set connection setting to
" (Do not dial)" in Internet Option of Internet Explorer. Note Use other connection software besides DOCOMO connection manager This software has equate features with the following software. Therefore, it is not necessary to use the following software at the same time. If required, change the setting to not start or uninstall.
- mopera U start up tools
- mopera U connection & setting tool
- FOMA PC configuration software
- FOMA byte counter Also, when using Mzone (Public Wireless LAN Connection) in this software, uninstall the following public wireless LAN connection software. When the following software are installed at the same time, the Mzone connection of this software is not available.
- U Public Wireless LAN Utility Software
- DOCOMO Public Wireless LAN Utility Software
- DOCOMO Public Wireless LAN Utility Program a Start Internet ExplorerSelect " (Tool)""
(Internet Option)"
b Select " (Connection)" tabSelect " (Do not dial)"
c Click "OK"
DOCOMO Connection Manager 79 For Windows Vista a Log on by DOCOMO connection manager user An administrator is required. When logged on by other people than the administrator, entering user name and password will be asked. For Windows XP/2000 The user belongs to administrators group or the user of " (Administrator of computer)"
operates log-on. b Exiting all the applications launched Besides anti-virus software, programs resident in Windows are also finished.
Ex: Right click the icon shown on task bar, and select "
(Close)" or " (Finish)". Installing DOCOMO Connection Manager a Launch the installer of DOCOMO connection manager using the included CD-ROM Select "CD-ROM (the included CD-ROM)" "Windows"
"dcm_connect_manager""dcm_connect_full_setup.exe"
Note
When Windows XP does not contain MSXML6 and Wireless LAN API, installation is required before installing DOCOMO connection manager. Press "Install" when the confirmation screen is displayed.
After finishing installing MSXML6 and Wireless LAN API, if reboot Windows, the installation of DOCOMO connection manager starts automatically. b Click " (Continue)"
For Windows XP/2000, " (User account control)" screen is not displayed. Setup program starts right away. 80 DOCOMO Connection Manager c Click " (Next)"
e Confirm the content of the license agreement. When agree with the content, select "
(I agree with the license agreement stipulations)" and click "
(Next)"
d Make sure to confirm the caution and then click " (Next)"
f Confirm the destination folder and click "
(Next)"
DOCOMO Connection Manager 81 g Click " (Install)"
Installing starts. h Click " (Finish)"
Installing finishes. Launching DOCOMO Connection Manager a
" (Start)""(All programs)""NTT DOCOMO""
(DOCOMO connection manager)""
(DOCOMO connection manager)"
DOCOMO connection manager starts. b For the first launching, the wizard setting is displayed automatically. The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual).pdf for detailed information. 82 DOCOMO Connection Manager Note
Just exiting the Internet browser or mail software does not disconnect the connection. When do not use communication, make sure to press "
(Disconnect)" button to disconnect the connection. For OS update, if auto update is set, the software will be updated automatically. Note that the packet communication fee may come high. Macintosh Version Installing DOCOMO Connection Manager Note
Use Ver. 1.00.0003 or later for "DOCOMO connection manager for Mac". a Launch the installer of DOCOMO connection manager from the included CD-ROM
Select "CD-ROM (included CD-ROM)" "Mac"
"dcm_connect_manager" "dcm_for_Mac" "
(Install)" Select "
(Install DOCOMO connection manager)" and click
"OK"
Disconnect DOCOMO Connection Manager 83 b Click " (Continue)"
d Click " (Continue)"
c Make sure to confirm " (Important information)", and click " (Continue)"
84 DOCOMO Connection Manager e Confirm " (The license agreement)", when agree with the content, click " (I Agree)"Click "
(Continue)"
f Confirming the destination folder to install and click " (Install)"
g Enter administrator name and passwordClick "OK"
The user account created after Mac OS X is set becomes the administrator of PC. Enter the used name and password. DOCOMO Connection Manager 85 h Click " (Continue installing)"
Note
If click " (Log out)", setting assistant screen is displayed. The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual) for detailed information. i Click " (Log out)"
Installing finishes. 86 DOCOMO Connection Manager Note
Just exiting the Internet browser or mail software does not disconnect the connection. When do not use communication, make sure to press "
(Disconnect)" button to disconnect the connection. For OS update, if auto update is set, the software will be updated automatically. Note that the packet communication fee may come high. Launching DOCOMO Connection Manager a
" (Application)" "
(DOCOMO connection manager)" "
(DOCOMO connection manager)"
DOCOMO connection manager starts. b For the first launching, the wizard setting is displayed automatically The connection with Internet gets prepared when operating or setting following the instruction of software. Refer to
(DOCOMO connection manager operation manual.pdf) for detailed information. Disconnect DOCOMO Connection Manager 87 Configuring Network Manually Configuring a Dial-up Network Manually 90 Communicating (Connecting by Dial-up) 109 89 For Windows XP a Connect the FOMA terminal with a PC
Connecting methodP24 b Click "(Start)" "
(All programs)" " (Accessories)"
"(Communication)" "
(Hyper Terminal)"
Hyper Terminal starts. For Windows 2000 Click "(Start)" " (Programs)" "
(Accessories)" "(Communication)" "
(Hyper Terminal)". c Enter a connection name in the " (Name)"
field Click "OK"
Configuring a Dial-up Network Manually This section describes the steps to configure settings for packet communication without using L-05A connection software or DOCOMO connection manager. Setting APN Set the access point (APN) in packet communication. Up to 10 APN can be set up and they are managed with cid's. Communication software is required to enter AT commands. This section describes the steps necessary for using the "(Hyper Terminal)" that comes with Windows.
The registration number (cid) 1 is set to mopera.ne.jp and the registration number 3 is set to mopera.net by default. Use cid 2 or from 4 to 10 when setting another access point.
"(Hyper Terminal)" does not come with Windows Vista. To configure the settings in Windows Vista, use communication software compatible with Windows Vista. For the setting procedures, refer to the instruction manual and other documentation that came with the software to be used. For a connection (APN) other than mopera U or mopera
, contact your ISP or network administrator.
90 Configuring Network Manually d Enter a non-existing phone number (such as
"0") in the "(Phone Number)" field Check that "FOMA L05A" is displayed for "
(Connection Method)" Click "OK"
If more than one modem name are displayed in the "
(Connection Method)" field, check the FOMA terminal modem name and select the proper one.P40 o e Click "(Cancel)" on the connection screen The Hyper Termina screen opens. f Enter the APN in the following formatPress Enter AT+CGDCONT=<cid>,"<PDP type>","<APN>"
Enter the following information in the corresponding <cid>,
<PDP type> and <APN> sections. If "OK" appears after you enter the information, the APN has been setup. cid Enter any number from 2, and from 4 to 10. Keep in mind that the old setting information will be overwritten if you select a cid number which has already been set. PDP type Select either PPP or IP for the connection method supported by the access point, and then enter the information enclosed in quotation marks (""). APN Enter the connection (APN) enclose it in quotation marks " ".
If the entered characters do not appear, enter ATE1. If register an access point with PPP in the PDP type and XXX.com in the APN of cid2 To reset the specified APN settings Enter AT+CGDCONT=<cid>
To view the registered APN Enter AT+CGDCONT Configuring Network Manually 91 g Check if "OK" is displayed h Click "(File)" "
(Exit Hyper Terminal)"
i Click "(Yes)" on the confirming disconnection screen Click "(No)" on the confirming to save screen Hyper Terminal will quit, and the setting of the APN completes. Note Configuring Dial-up Network Set up the dial-up network on the PC.
For setting up a connection to other than mopera U or mopera, contact your ISP or network administrator. Example: Connecting to the DOCOMO Internet connection service mopera U, which is registered to <cid>=3 For Windows Vista a Click
(Connection)"
"(Start)" "
b Click "
(Set up connection or network)"
The APN information is saved in the FOMA terminal. If you
connect a different FOMA terminal, save the APN information again. If you want to use the APN information registered on the PC, register the same APN in the same cid of the FOMA terminal. 92 Configuring Network Manually c Select "
(Set up dial-up connection)" Click "
(Next)"
d When the modem selection screen appears, click "FOMA L05A"
The modem selection screen opens only when the PC has more than one modem. Configuring Network Manually 93 f Click "(Skip)" on the "()...
(Connecting to (APN))" screen The connection test will not be performed. Only the settings will be checked.
If you do not click "(Skip)", the connection to the Internet will be established. e Configure various settings, then click "
(Connect)"
Enter the APN number in the "
(Phone number to a dial-up connection)".
Enter the user name and password specified by your ISP or network administrator in the "(User name)" and "
(Password)" fields.
You can leave the user name and password fields unfilled when connecting to mopera U/mopera.
Enter a connection name in the " (Connection Name)"
field. 94 Configuring Network Manually g Click "(Set up the connection)" "(Close)"
j Check the settings on the "(General)" tab window If two or more modems are connected to a PC, enable only "
- FOMA L05A (Modem - FOMA L05A)" in the "
(Connection Method)" field.
Disable "(Use dialing information)". h Click
(Connection)"
"(Start)" "
i Select the created dial-up connection icon Right click " (Properties)"
Configuring Network Manually 95 k Click "(Networking)" tab Configure each setting Place a checkmark next to the "
4 (TCP/IPv4) (Internet Protocol 4 (TCP/IPv4))"
checkbox in the "(This connection uses the following items)" field. Obtain the settings for "QoS(QoS Packet Scheduler)" from your ISP or network administrator.
To set up TCP/IP, click " (Properties)". Contact your ISP or network administrator for setting up. l Click the "(Option)" tab Click
"PPP(PPP Settings)"
m Remove checkmarks from all items Click
"OK"
n On the "(Option)" tab window, click
"OK"
96 Configuring Network Manually c Select "(Connect to the Internet)" Click "(Next)"
For Windows XP a Click "(Start)" "
(All programs)" " (Accessories)"
"(Communication)" "
(New Connection Wizard)"
b On the New connection wizard screen, click "
(Next)"
d Select "(Set up the connection manually)" Click "
(Next)"
Configuring Network Manually 97 e Select "
(Use a dial-up modem to connect)" Click "
(Next)"
g Enter a name in the "ISP(ISP Name)"field Click "(Next)"
f If "(Select a device)" screen appears, check in " - FOMA L05A
(COM4) (Modem - FOMA L05A(COM4))"
checkbox Click "(Next)"
The "(Select a device)" screen appears only when the PC has more than one modem. h Enter the APN phone number in the "
(Phone Number)" field Click " (Next)"
98 Configuring Network Manually For packet communication Enter "*99***<cid>#". Enter the registered number of APN in <cid>. (P73) i Select the connection usage range Click "
(Next)"
Select a user.
Depending on the PC settings, this screen may not appear. k Click "(Finish)"
The new connection wizard appears. j Fill in the "(User Name)", "
(Password)", and "
(Confirm password)" fields Click "
(Next)"
Enter the information provided by your ISP or network administrator.
Enter "(User name)" and " (Password)"
correctly according to the instruction from the provider. Pay attention to the capital characters.
To connect to mopera U or mopera, these fields can be left unfilled. l Click "(Start)" "
(All programs)" "(Accessories)"
"(Communication)" "
(Network Connection)"
Configuring Network Manually 99 n Check the settings on the "(General)" tab window
If more than one modem is connected to a PC, enable only
" - FOMA L05A (COM4) (Modem - FOMA L05A
(COM4))" in the " (Connection Method)" field.
Disable "(Use dialing information)". m Select the created dial-up connection icon Right click Click "(Properties)"
100 Configuring Network Manually o Click the "(Networking)"
tabConfirm each itemClick "
(Settings)"
Select "PPP:Windows 95/98/NT4/2000, Internet" in the "
(Dial-up server type to call)" field
Enable "(Internet Protocol) (TCP/
IP)" in the "(This connection uses the following items)" field. You cannot change the settings of "Qos (QoS Packet Scheduler)". Use it as usual.
When connecting to provider, to confirm the TCP/IP setting contact the provider or network administrator. q Remove checkmarks from all items Click
"OK"
r click "OK" on the "(Networking)"
tab window For Windows 2000 a Click "(Start)" "
(Programs)" "(Accessories)" "
(Communication)" "
(Network and Dialup Connections)"
b On the Network and Dial-up connection screen, double-click the"
(Create new connection)" icon p Click "(Settings)"
Configuring Network Manually 101 c If the location information screen appears, enter "(City code)" Click "OK"
This appears only when " (Create new connection)" is launched for the first time. Go to Step 5 when launching this for the second time or later. d On the phone and modem option screen, click
"OK"
e On the Network connection wizard screen, click "(Next)"
f Select "
(Connect to Internet via dial-up)" Click "
(Next)"
102 Configuring Network Manually g Select "
(LAN)
(Set up the Internet connection manually, or connect to the Internet using LAN)" Click "(Next)"
h Select "
(Connect to the Internet using a telephone line and a modem)" Click "
(Next)"
Configuring Network Manually 103 i If the modem selection screen opens, select
"FOMA L05A" Click " (Next)"
The modem selection screen opens only when the PC has more than one modem.
If "FOMA L05A" is not displayed, click "
(Select the modem used to connect to the Internet)" field and then select "FOMA L05A". j Enter the APN phone number in the "
(Phone Number)" field Click "
(Advanced settings)"
Do not enter anything in "(City code)" field
Disable "(Use the city code and dialing information)". Packet communication information Enter "*99***<cid>#". Enter registration number of APN in <cid>. 104 Configuring Network Manually k Configure the settings on the "
(Connection)" tab window according to the examples on the screen.
If you are connecting to other thanmopera U or mopera, fill in the " (Connection type)" and "
(Log on procedures)" fields according to the information provided by your ISP or network administrator. l Click the "(Address)" tabSet each itemClick "OK"
If you are connecting to other than mopera U or mopera, fill in the "IP (IP address)" and "ISP DNS ()
(Assign DNS address automatically by ISP)" fields according to the information provided by your ISP, and follow the instruction from provider. m On the "
(Internet account connection information)"
screen, click "(Next)"
Configuring Network Manually 105 n Enter "(User Name)" and "
(Password)" Click "(Next)"
Enter "(User name) and "(Password)"
correctly according to the instruction from the provider. Pay attention to the capital characters. Note
For mopera U or mopera, connection is operated even when "(User name)" field and "
(Password)" field are empty. The screen "
(Is it OK to enter nothing in User name?)" is displayed in this case. Click "(OK)" in each screen. 106 Configuring Network Manually o Enter a connection name in the "
(Connection Name)" field Click " (Next)"
q Click "(Finish)"
If "
(Select this to connect to the Internet now and click Finish)" appears, disable the option. p Select "(No)" Click "(Next)"
When setting Internet mail, select "(OK)". Contact the provider for detailed information of setting. r Select the created dial-up connection icon
Click "(File)" "
(Properties)"
Configuring Network Manually 107 s Check the settings on the "(General)" tab window
If more than one modem is connected to a PC, enable only
" - FOMA L05A (COM3) (Modem - FOMA L05A
(COM3))" in the " (Connection Method)" field
Disable "(Use dialing information)". 108 Configuring Network Manually t Click the "(Networking)"
tabConfirm each itemClick "
(Settings)"
Select "PPP:Windows 95/98/NT4/2000, Internet" in the "
(Dial-up server type to call)" field.
Enable only " (Internet protocol)
(TCP/IP)" in the "(Components)" field. u Click "(Settings)"
v Remove checkmarks from all items Click "OK"
w Click "OK" on the "(Networking)"
tab window b Enter "(User Name)" and "
(Password)" Click "(Dial)"
The APN will be connected.
To connect to mopera U or mopera , you can leave the " (User Name)" and "(Password)"
fields unfilled and click "(Dial)". If another ISP or dialup connection is selected, fill in the "(User Name)" and " (Password)" fields and click "
(Dial)".
You can save the user name and password or just the password to skip entering them next time.
Depending on the operating system, a connection completion screen may appear when the dial-up connection is established. However, the connection completion screen does not appear if you previously set the completion message not to appear. Communicating (Connecting by Dial-up) This section describes steps to start and terminate communication without using L-05A connection software or DOCOMO connection manager.
Check whether the FOMA terminal and the PC are connected properly before starting communication.P24
When performing communication, connect the FOMA terminal you used to configure the settings. If a different FOMA terminal is connected, L-05A Communication Configuration Files
(Drivers) may need to be reinstalled. For Windows Vista a Click
"(Start)" " (Connect to)" Select the access point that has been set up Click " (Connect)."
For Windows XP Click " (Start)" "(All programs)" " (Accessories)" "
(Communication)" "(Network connection)" Double click the APN that has been set up For Windows 2000 Click "(Start)" " (Programs)" "
(Accessories)" "(Communication)" "
(Network and Dialup Connections)" Double-click the APN icon that has been set up. Configuring Network Manually 109 c Click "(Disconnect)"
The communication will be terminated. Disconnecting Communication Exiting the Internet browser may not terminate the connection. Perform the following steps to terminate the connection securely. For Windows Vista a Click the PC A screen indicating the connection status appears. the dial-up icon in the task tray of b Click "(Connect or disconnect)"
For Window XP/2000 The above screen will not be displayed. Follow the next procedure. Note
The communication speed shown on the PC screen may be different from the actual communication speed. 110 Configuring Network Manually Overseas Use International Roaming Service (WORLD WING) 112 Services Available Overseas 112 Before Using Overseas 113 Setting the Searching Method for Available Networks 115 Configuring Network 116 111 International Roaming Service
(WORLD WING) WORLD WING is DOCOMO's international roaming service that provides telephone and other types of communication services overseas out of the service area of FOMA network, using affiliated overseas network.
The following 3 types of communication are included in overseas network. 3G network A third generation mobile communication network complying with 3GPP Global standards. (3rd Generation Partnership Project) The local satandardization organization established for the development of common technical specifications related to 3rd Generation Mobile Communication Systems
(IMT-2000) Services Available Overseas Available communication services may vary depending on the overseas carrier or network. Available Communication Services Service Description Data Communication Available for data communication using packets communication. Sending and receiving SMS may be available in overseas. Please understand that communication fee is counted when sending SMS. Packet communication is not available for GSM network communication type. GSM (Global System for Mobile Communication) network The second generation mobile communication network in a digital communication system that is most widely used around the world. GPRS (3General Packet Radio Service) network GPRS is the 2.5 generation mobile communication system that enables high speed packet communication using GSM. It is available to use 3G network or GSM/GPRS network service within service area. For countries/areas support 3G850MHz/
GSM850MHz, it is also available to use.
Before using the FOMA terminal overseas, refer to the followings.
- "Mobile Phone User's Guide [International Services]"
- DOCOMO "International Service Web site"
112 Overseas Use Note
For details on available communication services while using international roaming, refer to Mobile Phone User's Guide [International Services] or visit DOCOMO
"International Service Web site".
Voice call or video telephony features are not supported by L-05A. Before Using Overseas STEP1Before Leaving Japan STEP2While Overseas STEP3After Coming Back to Japan Before Leaving Japan Before using the FOMA terminal overseas, refer to the followings.
"Mobile Phone User's Guide [International Services]"
"Mobile Phone User's Guide [Network Services]"
DOCOMO "International Service Web site"
Subscription
If you subscribed to the FOMA service after September 1, 2005, no separate subscription is required to use WORLD WING. If you subscribed to the FOMA service on or before August 31, 2005 and have not subscribed to WORLD WING, a separate subscription is required to use it.
A FOMA card (green/White) made available for WORLD WING must be inserted in the FOMA terminal. Power source and voltage in the country or region of stay
Countries and regions may have different power sources, voltages or power outlet shapes. Check these in the instruction manual for your PC or web sites of the PC manufacturer in advance. Network setup
You can change network setup from overseas.P116 Internet access
For overseas access points or settings for using the Internet overseas, contact your Internet service provider.
If you subscribe to mopera U, visit the mopera U web site. http://www.mopera.net/ (Japanese only) While Overseas Switching networks Searching for and connecting to an access point are performed automatically by default. No special settings are required. Main screen display area The name of the connected carrier can be viewed in the display area of the Main screen.P116 Note
You can manually switch networks if you want to connect to a particular network. See procedure 3 of "
(Configuring Networks)" (P116) Inquries overseas If your FOMA card (green/white) is lost or stolen overseas, contact DOCOMO immediately and temporarily suspend your subscription. For inquiry information, see "docomo Information Center" on the back of this manual. Call or data communication charge will still on you after the terminal was lost or stolen. Overseas Use 113 Country Codes for Major Countries Area Code Area Code U.S.A U.K. Italy India Indonesia Egypt Australia Austria Netherlands Canada Korea Greece Singapore Switzerland Sweden Spain Thailand Taiwan Tahiti Czech China Germany Turkey Japan New Caledonia New Zealand Norway Hungary Fiji Philippines Finland France Brazil Vietnam Peru Belgium Hong Kong Macau Malaysia Maldives Russia 49 90 81 687 64 47 36 679 63 358 33 55 84 51 32 852 853 60 960 7 1 44 39 91 62 20 61 43 31 1 82 30 65 41 46 34 66 886 689 420 86 International Access Codes for Major Countries (Table 1) Area Code Area Code Ireland U.S.A. U.A.E. U.K. Italy India Indonesia Australia Netherlands Canada Korea Greece Singapore Switzerland Sweden Spain Thailand Taiwan Czech China Denmark Germany Turkey New Zealand Norway Hungary Philippines Finland France Brazil Vietnam Belgium Poland Portugal Hong Kong Macau Malaysia Monaco Luxembourg Russia 00 011 00 00 00 00 001 0011 00 011 001 00 001 00 00 00 001 002 00 00 00 00 00 00 00 00 00 00 00 0021 0014 00 00 00 00 001 00 00 00 00 810 For country code or detailed information, refer to "Mobile Phone User's Guide [International Services]" or DOCOMO
"International Service Web site". For codes of other countries or details, visit DOCOMO
"International Service Web site". 114 Overseas Use International Phone Codes for Universal Number(Table 2) Area Code Area Code Ireland U.S.A. Argentina U.K. Israel Italy Australia Austria Netherlands Canada Korea Colombia Singapore Switzerland Sweden Spain Thailand 00 011 00 00 014 00 0011 00 00 011 001 009 001 00 00 00 001 Taiwan China Denmark Germany New Zealand Norway Hungary Philippines Finland France Brazil Belgium Portugal Hong Kong Malaysia South Africa Luxembourg 00 00 00 00 00 00 00 00 990 00 0021 00 00 001 00 09 00 For codes of other countries or details, visit DOCOMO
"International Service Web site". After Coming Back to Japan After coming back to Japan, the FOMA network will be connected automatically. If connection can not be established Set to "(Auto)" from "(Search Network )" of "(Configuring network)"
(P116) Setting the Searching Method for Available Networks Switching Carriers Manually The FOMA terminal is set to automatically find and switch to an available network in the country of stay by default. However, if you have a preferred network in the area or network cannot be found automatically, you can set to a network manually. For details, see "Configuring Networks"
(P116). Overseas Use 115 c Searching network
(Auto) Network can be searched automatically.
(Manual) Connect to the listed networks manually. If network search mode is set to "manual" overseas, reset to "Auto" after coming back to Japan. d Specify if display or hide the network information
(Display) The name of the network receiving current service is displayed on the screen.
(Hide) The name of the network receiving current service is not displayed on the screen. e Click the applicable
The information entered will not be set without clicking the applicable f Click Configuring Network
Allow you to configure network by L-05A connection software. a Click from the application option screen
(Application)
(Prior network)
(Application)
(Network Search)
(Application)
(Network Information) b Specify a "(Prior network)"
(Network priority order selection setting) 116 Overseas Use Note
How to manually configure network
- Select "(Manual)"
- The available network list will be displayed after searching.
- Select one from the available networks.
- Click
Network is not displayed in FOMA area when even if
"display" is set in network information.
Connecting to Internet or sending SMS may not be able to operate properly when network setting is changed manually.
While using OverseaP111
- When you are in roaming area and set FOMA terminal to automatically find and you can have automatic roaming service. If network can not be found automatically, select the available network service manually.
- Some communication services may not available depending on the overseas carrier or network. Overseas Use 117 Appendix/Troubleshooting AT Commands 120 AT Command List 121 Troubleshooting 130 Error Messages 132 Warranty and After-Sales Service 134 Updating software 135 Main specifications 136 Export Controls of the Product and Accessories 137 Intellectual Property Rights 139 Index 141 119 AT Commands AT commands are used to check the FOMA terminal function settings or status by using a PC. Usually, the communication software issues AT commands so you do not need to be concerned about them. Use AT commands if you want to control the FOMA terminal in your own way. Form of AT Commands AT commands should be entered on the Terminal Mode screen of the communication software. Use only single-
byte alphanumeric characters.
<Example>
ATD 99 3#
Hard Return Parameter: Content Command Name
An AT command must be entered on a single line including parameters (numbers and symbols) following the command. On the Terminal Mode screen of the communication software,"one line" is from the first character to the character before
. Note
In the Terminal mode, a PC functions as a communication terminal. Characters entered from the keyboard are sent to a line connected to a communication port. 120 Appendix/Troubleshooting AT Command List The following AT commands can be used on the L-05Amodem port.
[&F]A command to initialize settings used as AT&F command.
[?][=?]The current settings appear when adding?at the end of the command, and the effective range of the current settings appears when adding=?at the end of the command.
Command Overview Parameters/Description Comments Examples AT&C<n>
AT&F<n>
Select the operating conditions of the circuit CD for DTE Reset the FOMA terminal AT command set values to factory defaults If executed during a communication, the line is disconnected. n=0: Always keeps CD singal ON n=1 (default): CD changes depending on the other party's modem status. AT&C1 OK Only n=0 can be set (Skippable)
AT+CGDCONT [?] [=?] Set APN when sending Packet AT+CGEQMIN [?] [=?]
AT+CGEQREQ [?] [=?]
AT+CGMR communication. Register criteria value for determining if QoS (Quality of Service) sent from network when PPP Packet communication is established, is acceptable or not. Set QoS(Quality of Service) to request for the network when PPP Packet communication is established. Display the version of the AT+CGMR FOMA terminal. Refer to P128 Refer to P128 Refer to P128 Refer to P128 Refer to P128 Refer to P128
AT+CGMR 1234567890123 456 OK Appendix/Troubleshooting 121 Command AT+CGREG=<n>
[&F]
Set whether to be notified of the network registration status. Overview Parameters/Description n n=0(default): Do not note. n=1: Notify when outside and inside the service area is changed. ExecuteAT+CGREG?
then appears as
+CGREG:<n>,<state>
state 0:Not registered 1:Registered Home Network 4: Unknown 5: Registered (while roaming)
n=0: DisplayERROR n=1: Display in the form of +CMEE ERROR: xxxx(where xxxx are numbers) n=2(default): Display in the form of
+CMEE ERROR: xxxx(where xxxx are text) If using ATZ or AT&F command to default, "0" is setup. Note that when connecting L-05A to power, the value of ATZ or AT&F command differs. Comments Examples AT+CGREG?
+CGREG: 0,1 OK AT+CGREG=?
+CGREG: (0-2) OK AT+CGSN 12345678901 2345 OK AT+CMEE=0 OK AT+CMEE?
+CMEE: 0 OK AT+CMEE=?
+CMEE: (0, 1, 2) OK AT+CGSN Display the serial number of the FOMA terminal. AT+CMEE=<n>
[&F]
Set the error report form of the FOMA terminal. 122 Appendix/Troubleshooting Command Overview Parameters/Description AT+ CNUM Display the own number of the FOMA terminal AT+COPS=
<mode>,<format>
,<oper>,<stat>
Select and set carrier's name/Plmn Number.
ExecutingAT+CNUMdisplays in the form of+CNUM: <number>, <type>
number: phone number type=129: Excluding the international access code+
type=145: Including the international access code+
<mode>
0Auto (Searching network automatically and then change communication service) 1Manualto connect <oper>
communication service) 2Disconnection communication service Not supported 3Mapping don't excute. 4Auto manualIn case, to disconnect
<oper>communication service that excute automatically Not supported Comments Examples AT+CNUM
+CNUM:, 09080189242
,129 OK AT+COPS?
+COPS: 0,0,,2 OK AT+COPS=?
+COPS:2,,
,44010,2, 3,,, 44020,2,, 0,1,2,3,4, 0,1,2 OK
<format>
2Fixed number
<oper> represents country code(MCC) plus network code(MNC). 44010is displayed for MCC=440 and MNC=10 Appendix/Troubleshooting 123 Command Overview Parameters/Description AT+CPAS
Display FOMA terminal state AT+CPIN=PIN/
AT+CPIN=PUK PIN
Command to enter the PIN code or unblocking PIN code for FOMA card. AT+CUSD
[&F]
Inquire the change or setting contents of Internet configuration related to the extra service. Displays in the form of+CPAS : <n>. n=0: Available to set AT commands. n=3: Available and receiving n=4: Available and receiving Enter the PIN1 code for PIN, and enter unblocking PIN code for PUK. ExecutingAT+CPIN?displays
+CPIN: <n>. n=READY: Authenticated n=SIM PIN: Waiting for entry n=SIM PUK: Waiting for unblocking PIN1 code entry n=ERROR: Locked Form : AT+CUSD=<n>,"<str>"[,0]
n=0 : middle result Do not send <m>[<str>,<dcs>]
(default) n=1 : middle result Send <m>[<str>,<dcs>]
Middle result :
m=0 : setting finishes m=1 : information requirement from network exists. str :09
<str>""
Comments Examples AT+CPAS
+CPAS:0 OK AT+CPAS=?
+CPAS :0,3,4 OK
(+CPIN:SIM PIN status) AT+CPIN=
1234 OK
(+CPIN:SIM PUK status) AT+CPIN=
12345678, 1234 OK AT+CUSD=0,
"xxxxxxxxx"
OK AT+CUSD=1,"
1481 0000#",0
+CUSD:0,"148 7#",0 OK AT+CUSD=?
+CUSD: 0 OK AT+CUSD=?
+CUSD:(0-2) OK 124 Appendix/Troubleshooting Command Overview Parameters/Description ATDANTE Display the signal strength (number of antenna bars) of the FOMA terminal. AT+GCAP Display the capability list of the FOMA terminal. AT+GMI Display the manufacturer of the FOMA terminal. AT+GMM Display the name of the FOMA terminal. AT+GMR Display the s/w version of the FOMA terminal. Result format:
DANTE:<m>
m=0 Out of the service area m=1 : State of 0 or 1 antenna bar displayed m=2 : State of 2 antenna bars displayed m=3 : State of 3 antenna bars displayed
Comments Examples ATDANTE DANTE:3 OK AT+GCAP
+GCAP:
+CGSM,+DS,+ES OK AT+GMI LG Electronics Inc. OK AT+GMM FOMA L05A OK AT+GMR L05A-01-Vxxx-
440-10 OK Appendix/Troubleshooting 125 Command Overview Parameters/Description AT+IFC=<n>,<m>
[&F]
Set the local flow control method between the PC and the FOMA terminal. n : DCE by DTE control n=0 : No flow control. n=1 : Perform XON/XOFF control. n=2 (default): Perform RS/CS (RTS/
CTS) flow control. m : DTE by DCE control. m=0 : Perform No flow control. m=1: XON/XOFF control. m=2(default) : Perform RS/CS (RTS/
CTS) flow control AT+WS46=<n>
[&F]
Set the wireless network to be used by the FOMA terminal when dialing. 12: GSM 22: 3G (WCDMA) 25: GSM+3G (WCDMA) A/
ATD ATE<n>
[&F]
ATI<n>
Retry a command just before performing Sending packet Set whether to echo back the text sent from a PC. Display the recognition code 126 Appendix/Troubleshooting is not needed after entering command. Sending packetATD*99***
cid#
cid110 +
Display the APN that configured
+CGDCONT n=0 : Not echo back. n=1default) : Echo back. n=0 : Display [NTT DOCOMO]
n=1 : Display the name of the FOMA terminalSame as +GMM n=2 : Display the FOMA terminal version same as +GMR n=3 : Display OK n=4 : Display the details of communication functions of the FOMA terminal. Comments Examples AT+IFC=2, 2 OK AT+IFC?
+IFC: 2,2 OK AT+WS46?
25 OK A/
OK ATD*99***3#
CONNECT 7200000 ATE1 OK ATIO NTT DoCoMo OK Command Overview Parameters/Description ATS3=<n>
[&F] [?]
ATS4=<n>
[&F] [?]
ATS5=<n>
[&F] [?]
ATV<n>
[&F]
ATZ Set the return character (CR) to recognize the end of AT command text string. Set the line feed (LF) character. It is positioned next to the return character
(CR) if displaying the result code in alphanumeric characters. Set the back space (BS) character to delete the last character in the input buffer while AT commands are entered. Set the display method of the result code. Reset the settings on the FOMA terminal with the nonvolatile memory contents. If performed during a communication, the line is disconnected. n=13default : only n=13 can be specified. Only n=10 (default) can be specified. Only n=8 (default) can be specified. n=0 :Display in numeric characters. n=1(default): Display in text.
Comments Examples ATS3=13 OK ATS4=10 OK ATS5=8 OK ATV1 OK ATZ OK Appendix/Troubleshooting 127 Supplementary Explanation of AT Commands Command name+CGDCONT
Overview Set APN when sending packet connection.
Form
+CGDCONT=[<cid>[,<PDP type>[,<APN>]]]
Parameter descriptions Set the destination (APN) when sending packets. See the following examples for command operations.
<cid>1110
<PDP type>2PPP or IP
<APN>3Optional 1 <cid> is the number used to control the destination
(APN) for the packet communication to be registered in FOMA terminal. 1 to 10 can be registered. The default value of <cid>=1 is mopera.ne.jp and <cid>=3 is mopera.net. Set cid to 2 or a number between 4 and 10. 2 <PDP type> is a protocol for packet communication. 3 <APN> is optional string that indicates each destination.
Command examples Command to register an APN with the name of abc
(When PDP type is PPP, cid is 3 AT+CGDCONT=2,IP,abc OK
Operations without a parameter AT+CGDCONT=
Clear all the settings of <cid>. However, the setting of <cid>=1 or <cid>=3 is reset to the value when purchasing. AT+CGDCONT?Display the current settings. 128 Appendix/Troubleshooting Command name: +CGEQMIN=[Parameter]
Overview Register the threshold to accept the QoS (Quality of Service) sent from the network when packet communication is established.
Format
+CGEQMIN=<cid>[,,<Maximum bitrateUL>[,<Maximum bitrate DL>]]]
Parameter description
<cid>1110
<Maximum bitrate UL>2None (default)
<Maximum bitrate DL>2None (default) 1 <cid> is a number used to manage the access point
(APN) for the packet communication registered in the FOMA terminal. 2 <Maximum bitrate UL> and <Maximum bitrate DL>indicate the minimum communication speed [kbps] of upload and download traffic respectively between the FOMA terminal and the base station. If these are set to None (default), all speeds are permissible. Be aware that a packet communication may not be established because any other speed than this is not permissible.
Command examples
(1) Command to permit all speeds for both upload and download (When cid=2) AT+CGEQMIN=2 OK
(2) Command to permit only 5,700kbps for upload and 7,232kbps for download (When cid=2) AT+CGEQMIN=2,,5700,7232 OK
(3) Command to permit 5,700kbps for upload and all speeds for download (When cid=2) AT+CGEQMIN=2,,5700 OK
(4) Command to permit all speeds for upload and only 7,232kbps for download (When cid=4) AT+CGEQMIN=4,,,7232 OK
Operations without a parameter AT+CGEQMIN=Reset all <cid> to their defaults. AT+CGEQMIN=<cid>Reset the specified <cid> to its default. Command name: +CGEQREQ=[Parameter]
Overview Set the QoS (Quality of Service) requested to the network when packet communication is dialed.
Format
+CGEQREQ=[<cid>[,,<Maximum bitrate UL>[,<Maximum bitrate DL>]]]
Parameter description
<cid>1110
<Maximum bitrate UL>2None (default)
<Maximum bitrate DL>2None (default) 1 <cid> is a number used to manage the access point
(APN) for the packet communication registered in the FOMA terminal. 2 <Maximum bitrate UL> and <Maximum bitrate DL>indicate the minimum communication speed [kbps] of upload and download traffic respectively between the FOMA terminal and the base station. If these are set to None (default), all speeds are permissible. Be aware that a packet communication may not be established because any other speed than this is not permissible.
Operations without a parameter AT+CGEQREQ=Reset all <cid> to their defaults AT+CGEQREQ=<cid>Set the specified <cid> as default. Note
This command, (+CGDCONT, +CGEQMIN, + CGEQREQ) is not reset by [&F] and [Z], either. Result Codes List of result codes Numeric display Text display Description 0 1 3 4 OK CONNECT NO CARRIER ERROR Operation performed properly Connected to other party Line disconnected Unable to accept command
Command example Command to require 5,700kbps for upload and 7,232kbps for download (When cid=2) AT+CGEQREQ=2,2,5700,7232 OK Appendix/Troubleshooting 129 Troubleshooting First, check whether software is required to update. Update software if necessary. (Updating SoftwareP135) Contact General Inquiries specified by DOCOMO located in
"Repairs" at the last page of the manual if the symptom is not improved after confirming the check box. The FOMA terminal is not recognized Symptom FOMA terminal is not recognized Check Reinsert the FOMA terminal all the way into the USB port securely. Verify the L-05A Communication Configuration Files (Drivers) for the FOMA terminal functioning properly.P35, P42 Communication may fail and the FOMA terminal cannot be properly recognized and functioned, if the PC is started up or restarted with the FOMA terminal FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. When connecting the FOMA terminal with a USB port, if data communication is not available without being recognzied, double click the "DOCOMO" icon recognized as a CD drive or start "L-05A connection software" or
"DOCOMO connection manager" to recognize the FOMA terminal as a modem. The FOMA card will not be able to use if PIN1 unlock code is wrongly entered 10 times in a low. For further information, visit DOCOMO shop. 130 Appendix/Troubleshooting Communication problems Symptom Communications are not possible Check Verify that signals are received in the service area. In the setting of Send Caller ID does not conform to the provider's instructions, communication may not be performed. P74, P90 Check if you set the FOMA Card Setting to PIN1 unblocking.P69 If set to (PIN1 Lock), launch the L-05A connection software, then change FOMA card setting to PIN1 unblocking.P71 Check the property settings of the modem and the registration of the destination (APN) Problems with AT Commands Symptom
[ERROR]
appears when a command is entered
[OK] does not appear after an AT command is entered. Check Verify that you entered a correct ATcommand. Check the properties of the terminal software to see whether a device other than the FOMA terminal is selected Check the L-05A Communication Configuration Files (Drivers) have been installed and functioned properly. Verify that the commands start with "AT" or
"at". Other problems Symptom The terminal stopped working suddenly The FOMA terminal is not detected if it is inserted into a USB port while installing the L-05A Communication Configuration Files (Drivers). Check Verify that the FOMA CARD is properly inserted to FOMA terminal.P19 Your PC operating environments may have changed because a new peripheral or software was installed. Make a confirmation with manufacturer or maker of accessory or software. Please confirm the followings.
Whether the PC or OS you are using is in the latest condition?
(If required, apply revision program of OS or a maker.)
Whether the FOMA terminal recognizes normally when other USB devices are inserted into the USB port?
Whether the FOMA terminal operates normally when being inserted into another PC?
Whether the FOMA terminal operates normally when being reset to its default?
For inquiries related to OS or PC, contact Microsoft or PC manufactures. Internet connection speed decreased significantly Inserting FOMA terminal directly to a PC may result in deterioration of performance depending on the type of PC, specification and degree of electromagnetic interference. Deterioration of performance may occur to the service areas where W-CDMA/HSDPA/
GSM network are unstable. In this case, move to other area and try to connect again. Appendix/Troubleshooting 131 Error Messages Error Messages
PINPIN FOMA FOMA FOMA PIN1 PIN1 blockedPIN1 PIN1/3 PIN1PIN1 0123456789 PIN148 Description You are out of service area or available network. You may be out of service area or available network, or network error. Please do network setting again. Communication may fail and the FOMA terminal cannot be properly recognized if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. Contact DOCOMO shop if the same problems persist. You cannot customize setting during data communication. Try again after closing data communication. Two of new PIN1 are not identical each other. New PIN1 you want to change is not matched to the PIN1 you entered for verification purpose. Enter correct PIN1. Make sure to insert FOMA card into FOMA terminal before inserting to a PC. Do not remove FOMA card while using FOMA terminal. Verify the FOMA terminal is properly inserted into a PC. Verify that the FOMA terminal is properly recognized by the PC. An incorrect PIN1wasimproperly entered 3 times in a row. Available functions will be limited. Enter PIN unblocking code to unlock. An incorrect PIN1 code has been entered. Enter the correct PIN1 code again You can use 0,1,2,3,4,5,6,7,8,9 as a valid PIN1 code. Others are invalid. Valid PIN1 code is from 4 to 8 digit. 132 Appendix/Troubleshooting Error Messages PIN1PIN PIN/
10 SMS PIN1 FOMA FOMAFOMA To change the PIN1, PIN must be locked. Switch PIN unblocking to PIN blocking. Description An incorrect PIN was imporperly entered 10 times in a row. Available functions will be limited. Please enter the contact unblocking PIN code You may be out of service or available network.You may encounter problems due to the network error. You are no longer able to use FOMA card that PIN unblocking code has been improperly entered10 times in a row. Please contact DOCOMO shop. Communication may fail and the FOMA terminal cannot be properly recognized, if the PC is started up or restarted with the FOMA terminal left inserted in it. In this case, remove and reinsert the FOMA terminal. If communication fails even after the FOMA terminal is inserted again, remove it once, restart the PC, then insert the FOMA terminal into the PC again. When no data transmission has been incurred for a certain period of time. Communication will be resumed when data transmission is incurred, so stay as it is. Appendix/Troubleshooting 133 Replacement parts Basically, replacement parts (parts required to maintain product function) will be kept in stock for at least 4 years after termination of production. Please note that the product may not be repaired even during this period, depending on the malfunctioning parts due to a shortage of those parts. Depending on the nature of the required repairs, it may still be possible to repair your terminal even after this period. Contact Repairs listed on the back of this manual. Updating software Download the modification file of FOMA terminal from download site on the Internet and then update the software. If software update is necessary, you will be informed at the DOCOMO web site with "
Information". Pay attention Note
Do not modify the FOMA terminal, the FOMA card or its accessories.
- Fire, injury or damage may result.
- If the FOMA terminal is modified (part replacement, modification, painting, etc.), it will be repaired only after the modified parts have been restored to the condition at the time of purchase. However, repair may be refused depending on the nature of modification. Using sticker to decorate the FOMA terminal. Exchanging the packing with those other than DOCOMO product.
- Repair of failures or damage caused by modification are charged even during the warranty period.
Do not unplug the FOMA terminal with the computer during software update.
Software update (downloading and rewriting) may take a while. If software update fails, all operations become unavailable. In this case, bring your FOMA terminal to a DOCOMO service center.
Do not remove any inscription stickers attached to the FOMA terminal. The inscription stickers certify that the FOMA terminal satisfies specific technical standards. If stickers are removed intentionally or are reattached in such a way that confirmation of the sticker's contents is impossible, repair or servicing may be refused because confirmation of whether or not the device conforms to relevant technical standards cannot be made. Appendix/Troubleshooting 135 Power source Power voltage DC5V5%(Supplied from PC) Max Current consumption Max Current consumption while communicating 3G: Approx. 550mA or below GSM/GPRS: Approx. 300mA or below Average Current consumption while communicating 3G: Approx. 180mA or below GSM/GPRS: Approx. 170mA or below Average Current consumption while Standby:
3G: Approx. 90mA or below GSM/GPRS: Approx. 90mA or below Depending on the usage, power consumption fluctuates. Form factor USB connection type Dimensions Height: approx. 80mm Width: approx. 32mm Depth: approx. 13mm Weight Approx. 37g Main specifications Operation system Windows 2000 Professional Japanese version
(Service Pack 4 or later) Windows XP Home Edition Japanese version
(Service Pack 2 or later) Windows XP Professional Japanese version
(Service Pack 2 or later) Windows Vista 32 bit Japanese version (Service Pack1 or later) Windows Vista 64 bit Japanese version (Service Pack1 or later) Mac OS X 10.4.11 Japanese version Mac OS X 10.5.6 Japanese version Communication Speed Packet Communication:
Maximum receiving: 7.2MbpsBest effort Maximum sending: 5.7MbpsBest effort The maximum speed of 7.2Mbps for receiving and 5.7Mbps for sending is theoretical values and does not show the actual ones.The actual communication speed depends on communication environment and network congestion. Out of High-Speed area, the maximum communication speed for receiving and sending is 384kbps Operating environment Temperature535 Humidity45%85%
136 Appendix/Troubleshooting Export Controls of the Product and Accessories Japan Export Control Regulations (Foreign Exchange and Foreign Trade Law and relevant laws and regulations) and U.S. Reexport Regulations (Export Administration Regulations: EAR) apply to this product and its accessories. If you export or re-export this product or its accessories, please follow the necessary procedures at your own risk and expense. For details on the procedures, contact the Ministry of Economy, Trade and Industry or the U.S. Department of Commerce. European Union Directives Conformance Statement Hereby, LG Electronics, Inc. declares that this product is in compliance with:
The essential requirements and other relevant provisions of Directive 1999/5/EC
All other relevant EU Directives 0168 The above gives an example of a typical Product Approval Number. FCC Regulations Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Appendix/Troubleshooting 137 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:
This device & its accessories may not cause harmful interference.
This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This device has been tested for typical body-worn operations with the distance of 0.19inches (0.5cm) from the user's body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.19inches(0.5cm) must be maintained from the user's body. Consumer Information on SAR (Specific Absorption Rate) THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications 'Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the device transmitting at its highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 138 Appendix/Troubleshooting Before a device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., worn on the body) as required by the FCC for each model. The highest SAR value for this device when worn on the body is 1.17W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Gant section of http://
www.fcc.gov/ after searching on FCC ID BEJL05A. Additional information about Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. Intellectual Property Rights Copyrights and Rights of Portrait Without permission of the copyright owner you may not duplicate, modify, transmit over public communication lines, etc. any document, image, music, software, or other content owned by a third party that you have used this product to download from an Internet web site, etc., except for private uses such as duplication and indexing that are allowed by copyright law. Appendix/Troubleshooting 139
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-06-05 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
2 | 1850.2 ~ 1909.8 | PCB - PCS Licensed Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2009-06-05
|
||||
1 2 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 2 | FCC Registration Number (FRN) |
0020917688
|
||||
1 2 | Physical Address |
1000 Sylvan Avenue
|
||||
1 2 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
BEJ
|
||||
1 2 | Equipment Product Code |
L05A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
K**** H****
|
||||
1 2 | Title |
Director, Standards & Compliance
|
||||
1 2 | Telephone Number |
201-4********
|
||||
1 2 | Fax Number |
201-8********
|
||||
1 2 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 2 |
PCTEST Engineering Laboratory, Inc.
|
|||||
1 2 | Name |
R******** O********
|
||||
1 2 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 |
Columbia, Maryland 21045
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
410-2********
|
||||
1 2 | Fax Number |
410-2********
|
||||
1 2 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/13/2009 | ||||
1 2 | 07/20/2009 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 | PCB - PCS Licensed Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 850/ 1900 GSM/ GPRS/ EDGE and 850 WCDMA USB Dongle | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Yes | |||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power is ERP for Part 22 and EIRP for Part 24. This device contains 900 / 1800 MHz and WCDMA FDD band I functions that are not operational in U.S. Territories. Device was tested for SAR compliance for use in notebook computers with connector configurations as described in this filing, and can be used with notebook computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. For mounting-clip accessory configuration, the antenna(s) used for this transmitter must not be operating in conjunction with any other antenna or transmitter within a host device. End-users must be provided with specific information required to satisfy RF exposure compliance for all final notebook computer host devices. The maximum reported body SAR values are: Part 22 - 1.28 W/kg; Part 24 - 1.31 W/kg. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 | Name |
R**** O****
|
||||
1 2 | Telephone Number |
410-2********
|
||||
1 2 | Fax Number |
410 2********
|
||||
1 2 |
410-2********
|
|||||
1 2 |
r******@pctestlab.com
|
|||||
1 2 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 22H | 824.2 | 848.8 | 0.676 | 2.5 ppm | 247KGXW | ||||||||||||||||||||||||||||||||||
2 | 2 | 22H | 824.2 | 848.8 | 0.203 | 2.5 ppm | 271KG7W | ||||||||||||||||||||||||||||||||||
2 | 3 | 22H | 826.4 | 846.6 | 0.11 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
2 | 4 | 24E | 1850.2 | 1909.8 | 0.39 | 2.5 ppm | 245KGXW | ||||||||||||||||||||||||||||||||||
2 | 5 | 24E | 1850.2 | 1909.8 | 0.207 | 2.5 ppm | 282KG7W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC