CAR RSI
User Manual
Model Name : IR12PT
1. Overview and Specifications
(1) Overview
1) RSI (Rear Seat Infortainment) is the video screen monitor system that provides
movies and music in your car, using the latest technology. See your dealer to have
the system or software updated and upgraded.
2) The Bluetooth connection function allows for the use of wireless BT headset.
3) The Infotainment system can use Miracast for the use of WIFI function.
4) The Infotainment system can use touch screen function.
5) The IR (infrared) function allows for the use of wireless IR headset.
(2) Specifications
*Product
Specification
Item
Categories
Specifications
Equipment
DISPLAY ASM-VIDEO
Model Name
IR12PT-TS
면적
Weight
Power
Refer to image
1.60kg
DC 12V
Temperature Range
-40 ℃ ~ 85 ℃
< Basic Design Concept >
1) Size : 324.3mm x 206mm x 39.6mm ( Weight : 1.60kg)
*RF specifications
[ BT ]
Item
Frequency
BT Power
Data rate
Channel spacing
BT version
Modulation Type
GFSK, π/4 DQPSK, 8 DPSK
Specifications
2400 ~ 2483.5
10
1 ~ 3
1
BT4.2 + EDR
Unit
MHz
dBm
Mbps
MHz
MHz
2. Component
3. Home screen
4. Precautions
1) Always operate the vehicle in a safe manner. Do not become distracted by
the vehicle while driving and always be fully aware of all driving conditions.
Do not change settings or any functions. Pull over in a safe and legal
manner before attempting such operations. To promote safety, certain
functions are disabled unless the parking brake is on.
2) To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
3) To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
4) When driving your vehicle, be sure to keep the volume of the unit low
enough to allow you to hear sounds coming from the outside.
5) Do not drop it and avoid heavy impacts at anytime.
6) The driver should not watch the monitor while driving. If the driver
watches the monitor while driving, it may lead to carelessness and cause an
accident.
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for CLASS B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to
operate the equipment.
IMPORTANT NOTE: FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC Information
This device complies with Industry Canada license-exempt RSS standard(s). Operation in subject to The
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes:
1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.