FCC ID: BEJGVMRB Generic Video Module

Car RSE User Manual Model Name : GVMRB Product Name : GVM (Generic Video Module) 1. Overview and Specifications

(1) Overview 1) The GVM (Generic Video Module) operates as a controller to two or more touch-enabled displays in the rear seat, and/or in the front passenger seat for infotainment purposes. 2) Utilizing internal An-droid Operating system it allows users to stream media content from embedded apps, view vehicle information, and interact with HDMI ports in the front/rear consumer port inputs. 3) The GVM will drive touch display for entertainment, and supports audio streaming function for BT devices.

(device : BT headphone, BT earphone, BT speaker)

(2) Specifications

*Product Item Categories Specifications Product Name GVM (Generic Video Module) Model GVMRB Dimensions Refer to image Specification Weight 1.0kg Power Source DC 12V Operational Temperature range

-40 ~ 85

< Basic Design Concept >

Dimensions : 230.82mm x 122mm x 40.8mm

*RF specifications

[ Bluetooth ]

Item Frequency Modulation Type BT Power Data rate Channel spacing BT version Specifications 2400 ~ 2483.5 GFSK, /4 DQPSK, 8 DPSK

-2 (MIN.) / 1 (TYP.) / 4 (MAX.) 1 ~ 3 1 BT5.0 Unit MHz dBm Mbps MHz MHz

*Max output power: 4dBm (Maximum average power including tolerance)

*Tolerance: +/- 3dBm 2. Component 3. Operation Active Area Item Descriptions Display & Touch Display for viewing information and Touch screen for user operation

< Home Screen >

< Touch Gesture >

Symbol Gesture Description Tap (Press) You touch a part of the screen with your finger and then take the finger off from the screen Double tap A Double Touch gesture consists two Touches in quick succession. Long tap

/ Long press

(Press & Hold) A Long Press is performed by touching the screen and holding that touch location for some period of time. Flick (Flicking) Drag & Drop Pinch & Spread

(only in the browser) You move from one point to the other point quickly and then take the finger off from the screen (Factor: direction) You touch a part of the screen for 1 second or more while you move and then take the finger off from the screen Zoom out/in. Users place the two fingers a little distance apart on the screen and move them toward/spread each other without lifting them from the screen. 4. Precautions 1) Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving and always be fully aware of all driving conditions. Do not change settings or any functions. Pull over in a safe and legal manner before attempting such operations. To promote safety, certain functions are disabled unless the parking brake is on. 2) To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. 3) To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. 4) When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside. 5) Do not drop it and avoid heavy impacts at anytime. 6) The driver should not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident. 5. FCC/ISED Statements Federal Communications Commission(FCC) Statement (FCC Part 15.21) You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Part 15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help. FCC Part 15.19 Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment 5. FCC/ISED Statements FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance. This device must be installed the place inside the car where the antenna(s) is placed such that a minimum separation distance of at least 2 cm is maintained between the radiator

(antenna) and all persons at all times inside Vehicle. Responsible Party Information(Supplier'sDeclaration of Conformity) LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs New Jersey, United States, 07632 Contact Number of Information 5. FCC/ISED Statements Industry Canada Statement

[English]

Industry Canada Statement

(For Canada) This device complies with Industry Canadas licence-exempt RSS Stadard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Avis d'industrie canada Cet appareil est conforme aux normes CNR dIndustrie Canada applicables aux dispositifs exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement

(For Canada) This equipment complies with IC radiation exposure limits set forth for an Uncontrolled environment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. 5. FCC/ISED Statements

[French]

Avis d'Industrie Canada

(Pour le Canada) Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Avis dIndustrie Canada sur lexposition aux rayonnements Avis d'industrie canada

(Pour le Canada) Cet appareil est conforme aux limites dexposition aux rayonnements dIndustrie Canada pour un environnement non contrl. REMARQUE : LE FABRICANT NEST PAS RESPONSABLE DES INTERFRENCES RADIOLECTRIQUES CAUSES PAR DES MODIFICATIONS NON AUTORISES APPORTES CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT ANNULER LAUTORISATION ACCORDE LUTILISATEUR DE FAIRE FONCTIONNER LAPPAREIL. Cet appareil doit tre install l'intrieur de la voiture o l'antenne ou les antennes sont places de sorte qu'une distance de sparation minimale d'au moins 2 cm soit maintenue entre le radiateur (antenne) et toutes les personnes tout moment l'intrieur du vhicule.

Date:

June 16, 2023 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern:

Subject : FCC Agent Authorization Letter for FCC ID :BEJGVMRB We, the undersigned, hereby authorize HCT CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO., LTD. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. This authorization is valid until further written notice from the applicant. Sincerely, Signed by:

_________________________ Heejae Cho

(Name)

(Title)

(Email Address)

(Phone number) heejae.cho@lge.com 201-470-2696 Director, Regulatory and Environmental Affairs

(Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States

LG Electronics USA Attestation Letter (Section 2.911 (d)(5)(i)(ii) and 2.911(d)(7)) Date: 06-15-2023 FCC ID: BEJGVMRB To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046, USA We, LG Electronics USA, as requested by FCC, are declaring that both requirements of Section 2.911

(d)(5)(i)(ii) and 2.911(d)(7) are being satisfied likes below to the FCC requirements to protect the nation`s networks and supply chains from equipment (covered equipment) according to FCC 22-84 and KDB 986446 D01. 1. Section 2.911 (d)(5)(i)(ii)) 2.911

(d)(5)(i) 2.911

(d)(5)(ii) We certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. And, we certifies that one of following, 1. We are not identified on the Covered List and are not an affiliate or subsidiary of an entity identified on the Covered List. 2. We are identified on the Covered List as an entity producing covered equipment. But, we can be authorized since the reason as explained below. 3. We are an affiliate or subsidiary of an entity identified on the Covered List. But, we can be authorized since the reason as explained below.

*Only one of paragraphs 1, 2 or 3 should be checked, if checked on paragraphs 2 or 3, the reason why it does not include the covered equipment. 2. Section 2.911(d)(7) We, as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. We will maintain the agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. And we have the responsibility to inform the FCC whenever the agent information changes.

-. US Contact Name: Heejae Cho

-. US Address: LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs,

* FRN: 0023476120 New Jersey 07632, United States

-. Email: heejae.cho@lge.com Sincerely yours, Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs Company Name: LG Electronics USA

Date: June 15, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC Class II Permissive Change for FCC ID: BEJGVMRB Applicant: LG Electronics Inc. Product name: Generic Video Module Hereby we, LG Electronics Inc., request Class II Permissive Change to the authorized device (FCC ID: BEJGVMRB) for changing minimum separation distance between the antenna and user.

-. Minimum separation distance: 5 cm 20 mm All HW and SW are identical except above. If you have any question or comments, please contact the undersigned. Sincerely,

(Name) Heejae Cho

(Title) Director, Regulatory and Environmental Affairs

(Email Address) heejae.cho@lge.com

(Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States

Date:

June 16, 2023 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT: Request for Confidentiality for FCC ID: BEJGVMRB We hereby request confidential treatment of the information accompanying this application as outlined below:

LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description LONG-TERM CONFIDENTIAL SHORT-TERM CONFIDENTIAL

(180 DAYS) 1 2 3 4 5 6 7 8 Block Diagram Operational Description Parts List Schematics External Photos Internal Photos Test-Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signed by:

(Name)

(Title) Heejae Cho Director, Regulatory and Environmental Affairs

(Email Address) heejae.cho@lge.com

(Phone number) 201-470-2696

(Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States