all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 2.39 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Attestation Statements | January 12 2008 | ||||||
1 2 | Block Diagram | January 12 2008 | ||||||
1 2 | ID Label/Location Info | January 12 2008 | ||||||
1 2 | Test Report | January 12 2008 | ||||||
1 2 | Test Setup Photos | January 12 2008 |
1 2 | Users Manual | Users Manual | 2.39 MiB |
Order Number Test Report Number
: GETEC-C1-09-191
: GETEC-E3-09-107 FCC Class B Class II Permissive Change Page 1 / 1 APPENDIX G
: USERS MANUAL EUT Type: LCD Monitor FCC ID.: BEJHSTND-2591-G HP LD4200tm LCD Monitor User Guide 2009 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. First Edition (November 2009) Document Part Number: 588044-001 About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. ENWW iii Table of contents 1 Product Features HP Digital Signage Model .................................................................................................................... 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 2 Maintenance Guidelines ....................................................................................................................... 3 Cleaning the Monitor ............................................................................................................ 3 Shipping the Monitor ............................................................................................................ 3 3 Setting Up the Monitor Installing the Stand ............................................................................................................................... 4 Connecting the Speakers ..................................................................................................................... 5 Rotating to the Portrait Position (Select Models) .................................................................................. 7 Using the Remote Control .................................................................................................................... 8 Inserting the Batteries .......................................................................................................... 8 Identifying Remote Control Buttons ..................................................................................... 9 Identifying Rear Components ............................................................................................................. 10 Connecting to External Devices ......................................................................................................... 11 Connecting to the Computer .............................................................................................. 11 Connecting Daisy Chain Monitors ..................................................................................... 13 VESA Mounting Support .................................................................................................... 13 Connecting Video Input ..................................................................................................... 14 Connecting Component Input (480p/720p/1080p/1080i/480i) ........................................... 15 Connecting HDMI Input (480p/720p/1080i/1080p) ............................................................ 16 Watching AV Outputs ........................................................................................................ 17 Connecting the USB (Universal Serial Bus) Cable ............................................................ 17 4 Operating the Monitor Software and Utilities .......................................................................................................................... 19 The Information File ........................................................................................................... 19 The Image Color Matching File .......................................................................................... 19 Installing the .INF and .ICM Files ....................................................................................................... 20 Installing from the CD ........................................................................................................ 20 ENWW v Downloading from the Worldwide Web .............................................................................. 20 Screen Adjustment Options ................................................................................................................ 21 Using the Auto-Adjustment Function ................................................................................. 22 Using the On-Screen Display Menu ................................................................................................... 23 Using the Remote Control to Adjust the OSD .................................................................... 23 OSD Menu Selections ....................................................................................................... 24 Selecting An Aspect Ratio Mode ....................................................................................... 27 Adjusting the Timer Function ............................................................................................. 28 Clock ................................................................................................................. 28 On/Off Timer ..................................................................................................... 28 Sleep Time ........................................................................................................ 28 Auto Sleep ......................................................................................................... 28 Selecting Options ............................................................................................................... 29 Using the Key Lock ........................................................................................... 29 Using the ISM Method Option ........................................................................... 29 Using the Tile Mode .......................................................................................... 29 5 Operating the Touch Screen Touch Software Installation ................................................................................................................ 32 Driver and Configuration Control Panel Utility .................................................................................... 33 Touch Device ..................................................................................................................... 33 Information ........................................................................................................................ 33 Setup ................................................................................................................................. 33 Multipoint Touch ................................................................................................................ 35 Option/Tools ...................................................................................................................... 35 Popup Control .................................................................................................................... 41 Popup Control Menu .......................................................................................................... 41 Multi Monitor Display ......................................................................................................... 41 Appendix A Troubleshooting Solving Common Problems ................................................................................................................ 42 Using the Worldwide Web .................................................................................................................. 44 Preparing to Call Technical Support ................................................................................................... 44 Appendix B Technical Specifications HP LD4200tm LCD Monitor ................................................................................................................ 45 Recognizing Preset Display Resolutions ............................................................................................ 47 HP LD4200tm Preset Display Modes ................................................................................ 47 DTV Mode .......................................................................................................................... 47 Power Indicator .................................................................................................................. 48 Appendix C Controlling the Multiple Product Connecting the Cable ......................................................................................................................... 49 vi ENWW RS-232C Configurations .................................................................................................... 49 Communication Parameter ................................................................................................ 50 Command Reference List ................................................................................................................... 50 Transmission / Receiving Protocol ..................................................................................................... 51 01. Power (Command : a) .................................................................................................. 52 02. Input Select (Command : b) (Main Picture Input) ........................................................ 53 03. Aspect Ratio (Command : c) (Main picture format) ..................................................... 53 04. Screen Mute (Command : d) ....................................................................................... 54 05. Volume Mute (Command : e) ....................................................................................... 54 06. Volume Control (Command : f) .................................................................................... 55 07. Contrast (Command : g) .............................................................................................. 55 08. Brightness (Command : h) ........................................................................................... 56 09. Color (Command : i) (Video only) ................................................................................ 56 10. Tint (Command : j) (Video only) ................................................................................... 57 11. Sharpness (Command : k) (Video only) ....................................................................... 57 12. OSD Select (Command : l) .......................................................................................... 57 13. Remote Lock /Key Lock (Command : m) ..................................................................... 58 14. Balance (Command : t) ................................................................................................ 58 15. Color Temperature (Command : u)v ............................................................................ 59 16. Abnomal state (Command : z) ..................................................................................... 59 17. ISM mode (Command: j p) ........................................................................................... 60 18. Auto Configure (Command: j u) ................................................................................... 60 19. Key (Command : m c) .................................................................................................. 60 20. Tile Mode (Command : d d) ......................................................................................... 61 21. Tile H Position (Command : d e) .................................................................................. 61 22. Tile V Position (Command : d f) ................................................................................... 62 23. Tile H Size (Command : d g) ....................................................................................... 62 24. Tile V Size (Command : d h) ........................................................................................ 62 25. Tile ID Set (Command : d i) ......................................................................................... 62 26. Natural Mode (In Tilemode) (Command : d j) .............................................................. 63 27. Elapsed time return (Command : d l) ........................................................................... 63 28. Temperature value (Command : d n) ........................................................................... 63 29. Lamp fault Check (Command : d p) ............................................................................. 64 30. Auto volume (Command : d u) ..................................................................................... 64 31. Speaker (Command : d v) ............................................................................................ 65 32. Time (Command : f a) .................................................................................................. 65 33. On Timer (On/Off Timer) On, Off (Command : F b) ..................................................... 66 34. Off Timer (On/Off Timer) On, Off (Command : f c) ...................................................... 66 35. On Timer (On/Off Timer) Time (Command : f d) .......................................................... 67 36. Off Timer (On/Off Timer) Time (Command : f e) .......................................................... 68 37. Sleep Time (Command : f f) ......................................................................................... 68 38. Auto Sleep (Command : f g) ........................................................................................ 69 39. Power On Delay (Command : f h) ................................................................................ 69 40. Language (Command : f i) ........................................................................................... 70 ENWW vii 41. DPM Select (Command : f j) ........................................................................................ 70 42. Reset (Command : f k) ................................................................................................. 70 43. S/W Version (Command : f z) ...................................................................................... 71 44. Input Select (Command : x b) ...................................................................................... 71 IR Codes ............................................................................................................................................ 72 Remote Control IR Code ................................................................................................... 72 Output Wave ..................................................................................................... 72 Configuration of Frame ..................................................................................... 72 Lead Code ......................................................................................................... 73 Repeat Code ..................................................................................................... 73 Bit Description ................................................................................................... 73 Frame Interval: Tf .............................................................................................. 73 IR Codes Table .................................................................................................................. 73 Appendix D Agency Regulatory Notices Federal Communications Commission Notice ................................................................................... 75 Modifications ...................................................................................................................... 75 Cables ................................................................................................................................ 75 Declaration of Conformity for Products Marked with the FCC Logo (United States Only) ................. 75 Canadian Notice ................................................................................................................................. 76 Avis Canadien .................................................................................................................................... 76 European Union Regulatory Notice .................................................................................................... 76 German Ergonomics Notice ............................................................................................................... 77 Japanese Notice ................................................................................................................................. 77 Korean Notice ..................................................................................................................................... 77 Power Cord Set Requirements ........................................................................................................... 77 Japanese Power Cord Requirements ................................................................................ 77 Product Environmental Notices .......................................................................................................... 78 Materials Disposal ............................................................................................................. 78 Disposal of Waste Equipment by Users in Private Household in the European Union ................................................................................................................................. 78 Chemical Substances ........................................................................................................ 78 HP Recycling Program ...................................................................................................... 78 Restriction of Hazardous Substances (RoHS) ................................................................... 78 Turkey EEE Regulation ..................................................................................................... 79 viii ENWW 1 Product Features HP Digital Signage Model The HP LCD digital signage monitor has a wide aspect active matrix thin-film transistor (TFT) panel. The monitor feature:
LD4200tm model, 106.7 cm (42-inch) widescreen diagonal viewable area display with 1920 x 1080 native resolution
Wide viewing angle up to 178 horizontal and 178 vertical
Landscape or portrait wall mounting position Remote control with AAA type batteries Video signal inputs to support HDMI and VGA analog with VGA cable provided USB cable provided to connect to the monitor and computer for touch driver functions Video inputs support HDMI, composite, S-video and RS232 signal inputs Picture mode, tile mode, color temperature, aspect ratio, audio modes, auto volume, on/off timer, key lock, ISM method and auto config user controls PC sound jack, audio ports and speaker ports Screen adjustment buttons on the back side of the monitor panel On-screen display (OSD) menu in several languages for ease of setup and screen optimization Plug and play capability if supported by the system Security cable provision on rear panel to lock down the monitor and help prevent theft Support VESA compliant mounting interface with 600 x 400 hole pattern Optional stand with cable management feature to position monitor on a desktop or table Optional mounting speakers Optional wall mount Optional Thin Client mounting adapter plate Software and documentation CD provided ENWW HP Digital Signage Model 1 2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 77. WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding feature. The grounding plug is an important safety feature. Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times. Disconnect power from the product by unplugging the power cord from the electrical outlet. For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug. To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor. For the protection of the monitor, as well as the computer, connect all power cords for the CAUTION:
computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if surge protection fails. Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor. WARNING! LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause personal injury. Care should be taken to route all cords and cables connected to the LCD monitor so that they can not be pulled, grabbed, or tripped over. 2 Chapter 2 Safety and Maintenance Guidelines ENWW Maintenance Guidelines To enhance the performance and extend the life of the monitor:
Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/
back plate of the monitor. Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device. Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord. Turn the monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use. Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. Do not drop the monitor or place it on an unstable surface. Do not allow anything to rest on the power cord. Do not walk on the cord. Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture. When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken. Cleaning the Monitor 1. Turn off the monitor and the computer. 2. Unplug the monitor from the wall outlet. 3. Clean the monitor plastics with a clean cloth dampened with water. 4. Clean the monitor screen with an antistatic screen cleaner. CAUTION: Do not use benzene, thinner, ammonia, or any other volatile substances to clean the monitor or the screen. These chemicals may damage the cabinet finish as well as the screen. Shipping the Monitor Keep the original packing box in a storage area. You may need it later if you move or ship the monitor. ENWW Maintenance Guidelines 3 3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Installing the Stand 1. Remove the six screws (1), monitor stand (2) and cable management clip (3) from the box. NOTE: The LD4200tm stand uses six M4 x 12mm screws. Figure 3-1 Stand Accessory Contents 2. Place a soft cloth on the table and place the product with the screen facing downward. Connect the stand as shown in the following illustrations. Figure 3-2 Sliding the Stand Onto the Monitor 4 Chapter 3 Setting Up the Monitor ENWW 3. Use the screws to secure the stand to the rear side of the product. Figure 3-3 Securing the Stand to the Monitor Connecting the Speakers 1. Mount the speakers onto the product. Figure 3-4 Mounting the Speakers 2. Use the four Taptite D3 x 12mm screws to secure the speakers to the monitor. Figure 3-5 Securing the Speakers to the Monitor ENWW Connecting the Speakers 5 3. After installing the speakers, use the cable holders and cable ties (available on select models) to organize the speaker cables. Figure 3-6 Using the Cable Holders (Feature Available on Select Models) Figure 3-7 Using the Cable Ties (Feature Available on Select Models) 6 Chapter 3 Setting Up the Monitor ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
4. After installing the speakers, connect the input terminal with a proper color match. Figure 3-8 Connecting to the Input Terminal Rotating to the Portrait Position (Select Models) When installing the monitor in the portrait position, rotate it clockwise based on its front. The monitor can be rotated in only one direction. NOTE: The monitor cannot be rotated if it is installed on the stand. Figure 3-9 Installing Portrait NOTE: LED orientation is on the bottom right corner in Landscape position and on the bottom left corner when rotated to Portrait position. ENWW Rotating to the Portrait Position (Select Models) 7 Using the Remote Control Inserting the Batteries 1. 2. Slide off the battery cover. Insert the batteries with correct polarity (+/-). 3. Close the battery cover. NOTE: Dispose of used batteries in the recycle bin to prevent environmental pollution. Figure 3-10 Inserting Batteries 8 Chapter 3 Setting Up the Monitor ENWW Identifying Remote Control Buttons Figure 3-11 Remote Control Buttons Component Function 1 2 3 4 5 6 7 8 9 10 11 AV Sleep PSM Menu Toggles through video: AV > Component1 > Component2 > RGB PC > HDMI/DVI. When watching AV, RGB PC, HDMI/DVI, Component1, Component2, the product will be automatically turned off after a certain period of time. Press the button repetitively to select an appropriate time duration. Toggles through present video settings. Opens the menu selection. Up and Down Provides up and down direction adjustment. Mute Power Input Select ARC Auto Exit Turns off sound. Turns the monitor on and off. Selects the video signal input. If you press the button once, the input signal window will open. Select the signal input type you want using the up or down button. Aspect Ratio Correction. Toggles through aspect ratio options. Automatic adjustment function (operational for the analog signal only). Exits the menu. ENWW Using the Remote Control 9 Component Function 12 13 Volume Adjusts the sound up and down. Set (Check) Press to select a menu item or save changes. Identifying Rear Components Figure 3-12 Rear Components (The product image in the user guide could be different from the actual image) Component Function 1 2 3 4 5 6 7 8 Power connector Connects the AC power cord to the monitor RS-232C serial ports Connects to RS-232 devices RGB PC, HDMI/DVI Ports HDMI supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals PC Sound Jack Connects the audio cable to the line-out jack of the PC sound card Wired Remote Control Port Connects a wired remote control to the monitor AV Ports Speaker Ports USB Port Connects the video and audio equipment to the monitor Connects the speakers to the monitor Connects the monitor and the PC with USB cable NOTE: The line-out terminal is used to connect to the speaker, including a built-in amplifier (AMP). Be sure the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of the PC sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program. Refer to the manual that comes with the sound card for additional instructions. 10 Chapter 3 Setting Up the Monitor ENWW Connecting to External Devices Connecting to the Computer 1. Be sure the monitor, computer and all attached devices are turned off. 2. Connect the signal input cable:
a. For analog operation, connect the VGA (D-sub) signal cable to the RGB IN (1) connector on the rear of the monitor and the other end to the VGA connector (2) on the computer. NOTE:
If connecting to a Mac computer, use the standard Macintosh adapter (3). Figure 3-13 Connecting the VGA Signal Cable b. For digital operation, connect the HDMI to DVI signal cable (not included) to the HDMI/DVI
(1) connector on the rear of the monitor and the other end to the DVI connector (2) on the computer. NOTE: Use shielded signal interface cables with ferrite cores to maintain standard compliance for this product. Figure 3-14 Connecting the HDMI to DVI Signal Cable 3. Connect the audio cable (sold separately) to the Audio (RGB/DVI) (1) connector on the rear of the monitor and the other end to the line out jack (2) on the computer. Figure 3-15 Connecting the Audio ENWW Connecting to External Devices 11 4. Connect the AC power cord to the power connector (1) on the rear of the monitor and the other end to an electrical outlet (2). WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding feature. The grounding plug is an important safety feature. Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times. Disconnect power from the product by unplugging the power cord from the electrical outlet. For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug. To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor. Figure 3-16 Connecting the Power Cord 5. Turn on power to the monitor by pressing the front panel power button. Figure 3-17 Front Panel Power Button 6. 7. Turn on the computer. Select an input signal. 12 Chapter 3 Setting Up the Monitor ENWW Press the INPUT button on the remote control to select the input signal. Press the SET button to save your change. Or, press the SOURCE button on the back side of the monitor panel. Press the AUTO/SET button to save your change. a. When connecting with a VGA signal input cable, select the RGB PC from the Input menu. b. When connecting with a HDMI to DVI signal input cable, select HDMI/DVI from the Input menu. NOTE:
computer. Press the INPUT button on the remote control to select the computer use. If connecting two computers, connect the signal cables (HDMI to DVI and VGA) to each CAUTION: Burn-in damage may occur on monitors that display the same static image on the screen for a prolonged period of time (12 consecutive hours of non-use). To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time or cycle between 5 minutes of static information and 10 seconds of a moving image. Image retention is a condition that may occur on all LCD screens. Screen burn-in is not covered under the HP warranty. Connecting Daisy Chain Monitors Use this function when displaying analog RGB inputs of a computer to the other product. To use different products connected to each other, connect one end of the signal input cable (15-pin D-
Sub VGA signal cable) to the RGB Out connector of product 1 and connect the other end of the RGB In connector of other products. Figure 3-18 Connecting Several Monitors to the Computer VESA Mounting Support This product supports a VESA FDMI compliant mounting interface. On the rear of the monitor are four VESA mounting holes that allow you to install a mounting device to the monitor. The mounting devices are purchased separately and not available from HP. Refer to the instructions included with the mount for additional information. ENWW Connecting to External Devices 13 A security cable provision is available on the rear of the monitor to help prevent theft. The cable and lock are available separate and can be purchased from HP. Figure 3-19 VESA Mounting Holes Connecting Video Input 1. Connect the video cable (sold separately) as shown in the following illustration, and then connect the power cable. a. When connecting with a BNC cable (1), connect the input terminal to the monitor and VCR/
DVD receiver. b. When connecting with an S-Video cable (2), connect the S-Video input terminal to the monitor and VCR/DVD receiver to watch high image quality movies. Figure 3-20 Connecting with the BNC and Audio Cables to VCR/DVD Receiver 2. Select an input signal. 14 Chapter 3 Setting Up the Monitor ENWW Press the INPUT button on the remote control to select the input signal. Press the SET button to save your change. Or, press the SOURCE button on the back side of the monitor panel. Press the AUTO/SET button to save your change. a. When connecting with a BNC cable, select AV from the Input menu. b. When connecting with an S-Video cable, select AV from the Input menu. NOTE: When the BNC cable is connected simultaneously with S-Video cable, the S-Video input has a priority. Connecting Component Input (480p/720p/1080p/1080i/480i) 1. Connect the video/audio cable (sold separately) as shown in the following illustration, and then connect the power cord. Connect the Component1 (1) or Component2 (2) input terminal to the monitor and HDTV receiver. Figure 3-21 Connecting the BNC and Audio Cables to HDTV Receiver NOTE: Some devices may require HDCP in order to display HD signals. Component does not support HDCP. 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. Press the SET button to save your change. Or, press the SOURCE button on the back side of the monitor panel. Press the AUTO/SET button to save your change. a. Select Component1 from the Input menu. b. Select Component2 from the Input menu. ENWW Connecting to External Devices 15 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Connecting HDMI Input (480p/720p/1080i/1080p) HDMI supports High Definition Input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. 1. Connect the video/audio cable (sold separately) as shown in the following illustration, and then connect the power cord.
(1) Connect an HDMI to DVI signal cable and RCA-PC audio cable to the monitor and VCR/DVD/
Set-top box
(2) Connecting an HDMI signal cable to the monitor and DVR/DVD/Set-top box Figure 3-22 Connecting HDMI Input to VCR/DVD/Set-Top Box 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. Press the SET button to save your change. Or, press the SOURCE button on the back side of the monitor panel. Press the AUTO/SET button to save your change. When connecting with an HDMI to DVI signal cable or HDMI signal input cable, select HDMI/DVI from the Input menu. 16 Chapter 3 Setting Up the Monitor ENWW Watching AV Outputs When using AV input, you can connect the AV Out to other monitors. Connect the BNC cable (1) and audio cable (2) to the video/TV (3) and to the monitor (4). Figure 3-23 Connecting AV Out Connecting the USB (Universal Serial Bus) Cable Use the touch screen functionality by connecting the monitor and the computer with a USB cable. Connect the USB cable for the touch screen before installing the Touch Driver Program. NOTE: The monitors USB terminal supports USB 2.0 and full speed (12Mbps). ENWW Connecting to External Devices 17 Figure 3-24 Connecting the USB Cable 18 Chapter 3 Setting Up the Monitor ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
4 Operating the Monitor Software and Utilities The CD that comes with the monitor contains files that you can install on the computer to enhance the performance of the monitor. HP monitor driver software, which automatically detects the computer's Microsoft Operating System and installs the corresponding .INF (Information) and .ICM (Image Color Matching) driver files that are used to configure the HP monitor Touch drivers (refer to chapter 5 for installation instructions) Auto-adjustment pattern utility to optimize the display PDF Complete is supplied on this CD and can be installed from the menu. NOTE:
monitors support Web site. See Downloading from the Worldwide Web on page 20 in this chapter. If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP The Information File The setup information, or .INF file, defines monitor resources used by Microsoft Windows operating systems to ensure monitor compatibility with the computers graphics adapter. The Image Color Matching File The image color matching, or .ICM file, is a color data file that is used in conjunction with graphics applications to provide consistent color matching from monitor screen to printer, or from scanner to the monitor screen. The .ICM file is only activated from within the graphics applications that support this feature. ENWW Software and Utilities 19 Installing the .INF and .ICM Files After you determine that you need to update, you can install the .INF and .ICM files from the CD or download them. Installing from the CD To install the .INF and .ICM files on the computer from the CD:
1. 2. 3. 4. 5. Insert the CD in the computer CD-ROM drive. The CD menu is displayed. View the Monitor Driver Software Readme file. Select Install Monitor Driver Software. Follow the on-screen instructions. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel. NOTE: You may need to install the digitally signed monitor .INF and .ICM files manually from the CD in the event of an installation error. Refer to the Monitor Driver Software Readme file on the CD. Downloading from the Worldwide Web To download the latest version of .INF and .ICM files from the HP monitors support Web site:
1. Refer to http://www.hp.com/support and select the country region. 2. 3. Follow the links for the monitor to the support page and download page. Ensure the system meets the requirements. 4. Download the software by following the instructions. 20 Chapter 4 Operating the Monitor ENWW Screen Adjustment Options Figure 4-1 Front Panel Controls Component 1 Source Function Toggles between video inputs:
AV - Composite Video, S-Video Component1 - HDTV, DVD Component2 - HDTV, DVD RGB PC - VGA or 15-pin D-Sub analog signal HDMI/DVI - Digital signal 2 3 4 5 6 7 Menu Opens or closes the OSD (On-screen Display) menu screen. OSD Select/Adjust buttons Selects an OSD menu icon or adjusts the settings in the OSD screen.
Adjusts up and down
Adjusts the volume Auto/Set Power IR Receiver Power Indicator When OSD window is closed, activates the auto adjustment feature to optimize the screen image. When OSD window is open, press to select a menu item or save changes. Press to turn on the power. Press again to turn it off. Receives signals from the remote control. Lights up blue when the display operates normally (on mode). If the display is in sleep (Energy Saving) mode, the indicator color changes to amber. ENWW Screen Adjustment Options 21 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using the Auto-Adjustment Function You can optimize the screen performance for the VGA (analog) input by using the Auto/Set button on the monitor (AUTO button on the remote control) and the auto-adjustment pattern software utility on the CD provided. Do not use this procedure if the monitor is using an HDMI to DVI input. If the monitor is using a VGA
(analog) input, this procedure can correct the following image quality conditions:
Fuzzy or unclear focus Ghosting, streaking or shadowing effects Faint vertical bars Thin, horizontal scrolling lines An off-center picture To use the auto-adjustment feature:
1. 2. 3. 4. 5. 6. Allow the monitor to warm up for 20 minutes before adjusting. Press the Auto/Set button on the back side of the monitor panel. If the result is not satisfactory, continue with the procedure. Insert the CD in the disc drive. The CD menu is displayed. Select Open Auto-Adjustment Software. The setup test pattern is displayed. Press the Auto/Set button on the back side of the monitor panel to produce a stable, centered image. Press the ESC key or any other key on the keyboard to exit the test pattern. 22 Chapter 4 Operating the Monitor ENWW Using the On-Screen Display Menu The monitor settings can be adjusted from the On-Screen Display (OSD) menu. Icon Main Menu Function Description Picture Adjusts screen brightness, contrast and color Audio Time Adjusts the audio options Adjusts the timer options Option Adjusts the screen status according to the circumstances Information Adjusts Set ID and check serial number and software version Using the Remote Control to Adjust the OSD Use the OSD to adjust the screen image based on your viewing preferences. To access the OSD, do the following:
1. If the monitor is not already on, press the power button to turn on the monitor. 2. 3. Press the MENU button (1) on the remote control. To access a control, use the buttons (2). 4. When the icon you want becomes highlighted, press the SET button (3). 5. Use the buttons (4) to adjust the item to the desired level. 6. Accept the changes by pressing the SET (5) button. 7. Exit the OSD menu by pressing the EXIT button (6). ENWW Using the On-Screen Display Menu 23 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. Icon Main Menu Submenu Description Picture Picture Mode Selects your screen presets. Toggle between:
Vivid - select to display with a sharp image. Standard - the most general and natural screen display status. Cinema - lowers brightness by one level. Sport - displays with a soft image. Game - to enjoy dynamic image when playing a game. User 1, 2 - allows the user defined settings:
Backlight: controls the brightness of the screen, adjust the brightness of the LCD panel. Contrast: adjusts the difference between the light and dark levels. Color: adjusts the color to desired level. Sharpness: adjusts the clearness of the screen. Tint: adjusts the tint to a desired level. Expert: compensates for each image mode, or adjust image values according to a particular image (applies only to User 2 menu.) If the Picture Mode setting in the Picture menu is set NOTE:
to Vivid, Standard, Cinema, Sport or Game, the subsequent menus will be automatically set. Color Temperature Selects color settings:
Cool - slightly bluish white. Medium - slightly purplish white. Warm - slightly reddish white. User - select this option to use the user-defined settings and set your own colors levels:
Red Green Blue 24 Chapter 4 Operating the Monitor ENWW Icon Main Menu Submenu Advanced Description Selects the following screen color adjustment settings:
Gamma - set your own gamma value. On the monitor, high gamma values display whitish images and low gamma values display high contrast images. Film Mode - function works in the following mode: AV, Component 480i. When you watch a movie, this function adjusts the set to the best picture appearance. Black Level - function works in the following mode: AV
(NTSC), HDMI/DVI adjusts the contrast and the brightness of the screen using the black level of the screen. NR - removing the noise up to the point where it does not damage the original picture. Aspect Ratio Selects the image size of the screen to:
16:9 - widescreen mode. Just Scan - allows you to enjoy the transmitted data fully without any images cut off. (This menu is activated only in 720p, 1080p and 1080i in Component mode.) Original - the aspect ratio is not adjusted from the original. It is set by the program being watched. 4:3 - the picture format is 4:3 aspect ratio. 1:1 - the aspect ratio is not adjusted from the original. Used in PC mode. (Only HDMI/DVI PC, RGB PC) 14:9 - programs are viewed normally in 14:9 with black bars added to the top and bottom. The 4:3 programs are magnified on the top/bottom and left/right sides. Zoom1,2 - 4:3 programs are magnified until they fill the 16:9 screen. The top and bottom will be cut off. Picture Reset Returns the Picture Mode, Color Temperature, and Advance menu settings to the default factory settings. Screen Adjusts the screen video to:
Auto config (RGB PC Input only): This button is for the automatic adjustment of the screen position, clock and phase. This function is available for analog signals only. Manual Config: If the picture isnt clear after auto adjustment and characters are still trembling, adjust the picture phase manually using the following functions:
Clock - minimizes any vertical bars or strips visible on the screen background. The horizontal screen size will also change. This function is available for analog signals only. The clock function is not available in Component, HDMI/DVI/AV. Phase - adjusts the focus of the display. This item allows you to move any horizontal noise and clear or sharpen the image of characters. This function is available for analog signals only. The phase function is not available in Component, HDMI/DVI/AV. ENWW Using the On-Screen Display Menu 25 Icon Main Menu Submenu Description H-Position - moves the screen position horizontally. V-Position - moves the screen position vertically. H-Size - adjusts the horizontal size of the screen. V-Size - adjusts the vertical size of the screen. XGA Mode (RGB-PC only) - provides improved or better picture quality, select the same mode corresponding to computer resolution. Reset: returns Manual Config to the default factory settings. Audio Sound Mode Automatically selects the best sound tone quality depending on the video type that youre currently watching:
Clear Voice - differentiates the human sound from others and helps users listen to human voices better. Standard - most commanding and natural audio. Music - select the option to enjoy the original sound when listening to the music. Cinema - select this option to enjoy sublime sound. Sport - select this option to watch sports broadcasting. Game - select this option to enjoy dynamic sound when playing a game. User - select this option to use the user-defined audio settings. NOTE: When connected to a computer and the Sound Mode setting, the audio menu is Clear Voice, Standard, Music, Cinema or Sport. The available menus are Balance, Auto Volume, Speaker. Auto Volume Adjusts uneven sound volumes across all channels or signals automatically to the most appropriate level. To use this feature select On. Balance Speaker Use this function to balance sound from the left and right speakers. Adjusts internal speaker status.If you want to use an external hi-
fi stereo system, turn off the internal speakers of the set. Time Clock Resets the clock if the current time is incorrect. On/Off Timer Sleep Time Auto Sleep The time off automatically switches the set to standby at the pre-
set time. Automatically turns off power when the time set by a user is passed. If active and there is no input signal, the set switches to off mode automatically after 10 minutes. Power On Delay When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload. 26 Chapter 4 Operating the Monitor ENWW Icon Main Menu Option Submenu Language Key Lock Description Selects the language in which the OSD menu is displayed. Sets up the monitor so that it can only be used with the remote control. This feature can prevent unauthorized viewing. ISM Method Avoids allowing a fixed or burn-in image to remain on the screen for a long period of time. Power Indicator Sets the power indicator on the front of the monitor to On or Off. DPM (Display Power Management) Select Tile Mode Turns the power saving mode on or off. Enlarges the screen and is also used with several products to view the screen. To use this function, it:
must be displayed with several other products. must be in a function that can be connected to RS232C or RGB Out. Factory Reset Select this option to return to the default factory settings. Information Set ID Assigns a unique Set ID number (name assignment) to each product when several products are connected for display. Specify the number (1 ~ 99) using the up and down buttons and exit. Use the assigned Set ID to individually control each product using the Product Control Program. Serial No Displays the serial numbers of the product. SW Version Displays the software version. Selecting An Aspect Ratio Mode The aspect ratio modes available for your selection depends on the current input source. Use the following table to determine which mode is available for your monitor. ARC \ Mode AV Component HDMI/DVI DTV PC 16:9 Just Scan Original 4:3 1:1 14:9 Zoom1 Zoom2 X X X X X X X X X X X X X X X RGB PC X X X ENWW Using the On-Screen Display Menu 27 Adjusting the Timer Function Use the remote control to set the following timer options. Clock The Clock menu allows you to reset the clock manually if the current time is incorrect. To reset the clock:
1. 2. 3. 4. Press the MENU button and then use buttons to select the Time menu. Press the button and then use buttons to select the Clock menu. Press the button and then use buttons to set the hour (00~23). Press the button and then use buttons to set the minutes (00~59). On/Off Timer The on/off timer menu lets you set the monitor to automatically switch to standby at a pre-set time:
1. 2. 3. 4. 5. Press the MENU button and then use buttons to select the Time menu. Press the button and then use buttons to select On/Off Timer. Press the button and then use buttons to set the hour (00~23). Press the button and then use buttons to set the minutes (00~59). Press the button and then use buttons to select On or Off. Sleep Time The sleep time menu lets you set the monitor power to automatically turn off when the time set by a user is passed. 1. 2. 3. Press the MENU button and then use buttons to select the Sleep Time menu. Press the button and then use buttons to set the hour (00~23). Press the button and then use buttons to set the minutes (00~59). Auto Sleep To set the monitor to switch to the off mode automatically after 10 minutes if Auto Sleep is active and there is no input signal:
1. 2. Press the MENU button and then use buttons to select the Auto Sleep menu. Press the button and then use buttons to select On or Off. NOTE:
be reset. In the event of a power interruption (disconnection or power failure), the Sleep Time clock must NOTE: Once the On or Off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set to the same time. When On time is operated, input screen is turned on as it was turned off. 28 Chapter 4 Operating the Monitor ENWW Selecting Options Using the Key Lock The monitor can be set up so you can only use the remote control. To lock or unlock the OSD screen adjustment:
1. Open the OSD menu and select Option. 2. 3. 4. Select Key Lock from the menu list. To lock the OSD screen adjustment, set the Key Lock tab to the ON position. To unlock the OSD screen adjustment, press the MENU button on the remote control and set the Key Lock tab to the Off position. Using the ISM Method Option A frozen or still picture from a PC/Video game that is displayed on the screen for a prolonged period of time could result in a ghost image remaining even when you change the image. To avoid a fixed or burn-
in image to remain on the screen for a long period of time:
1. Open the OSD menu and select Option. 2. 3. Select ISM Method from the menu list. Select one of the following menu options:
Normal - leave on normal if you dont foresee image burn-in being a problem. White wash - white wash fills the screen with solid white. This helps removes permanent images burned into the screen. A permanent image may be impossible to clear entirely with white wash. Orbiter - may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion - this function inverts the panel color of the screen. The panel color is automatically inverted every 30 minutes. Dot Wash - this function moves the black dots of the screen. The black dots are automatically moved every 5 second. Using the Tile Mode Tile Mode is used to enlarge the screen and also used with several products to view the screen. This function must be displayed with various other products and connected to RS-232C or RGB Out. Tile mode allows you to:
Choose tile alignment and set the ID of the current product to set location Set column by row (r = 1, 2, 3, 4, 5; c = 1, 2, 3, 4, 5) up to 5 x 5 Configure an integration screen as well as configure one by one display NOTE: Adjustments made to the settings will be saved only after pressing the SET button on the remote control. ENWW Using the On-Screen Display Menu 29 Figure 4-2 Tile Mode Enlarged Screen Figure 4-3 Tile Mode Product 1 ~ 4: C(2) x R(2) Figure 4-4 Tile Mode Product 1 ~ 9: C(3) x R(3) Figure 4-5 Tile Mode Product 1 ~ 2: C(2) x R(1) Figure 4-6 Tile Mode Product 1 ~ 16: C(4) x R(4) 30 Chapter 4 Operating the Monitor ENWW Use the following menu selections to adjust the Tile Mode:
H-Size - adjusts the horizontal size of the screen taking into account the size of the bezel. V-Size - adjusts the vertical size of the screen taking into account the size of the bezel. H-Position - moves the screen position horizontally. V-Position - moves the screen position vertically. Reset - function to initialize and release Tile. All Tile settings are released when selecting Tile recall and the screen returns to Full screen. Tile ID - selects the location of the Tile by setting an ID. Natural - the image is omitted by the distance between the screens to be naturally shown. Use the Factory Reset option to return to the default factory settings. ENWW Using the On-Screen Display Menu 31 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
5 Operating the Touch Screen The touch driver software controls the functionality of the Infrared Touch Screen. Once you install the touch driver, you can select, launch, and drag objects using the touch screen. To make a selection, touch the screen. Touch Software Installation The CD that comes with LD4200tm monitor contains files that you can install to communicate with the touch screen and use the touch screen with Windows applications. To install the touch driver:
1. Insert the CD in the computer CD-ROM. The CD menu is displayed. 2. Click Install Touch Driver. To continue, click Next. 3. Read the license agreement and click Yes to accept the terms of the License Agreement. To install the touch driver, you must accept the agreement to install the driver. 4. Choose a destination location. Select a folder where setup will install files. Install in the default folder or browse and select another folder, and then click Next. 5. Select a Program Folder and click Next to continue. 6. Review the settings. If you want to change the settings, click Back. Click Next to begin copying files. 7. If Windows cant verify the publisher of the driver software, click Install this driver software anyway or click Continue Anyway. Since this driver software was obtained from HP, don't stop the installation. 8. After setup has finished installing the touch driver, select Yes to restart and click Finish. 9. Connect Touch screen monitor cable (USB ) to your PC. After installing the touch driver, connecting the USB cable, and restarting your computer, the Found New Hardware Wizard is displayed to complete the driver installation. To install the IR Touch Device Driver:
1. 2. 3. Select Yes, this time only and click Next to continue. Select Install from a list or specific location (Advanced) and click Next to continue. In the Browse For Folder window that displays, select the folder that contains drivers for your hardware. 32 Chapter 5 Operating the Touch Screen ENWW 4. 5. 6. In the Choose your search and installation options window, accept the default option of Search for the best driver in these locations and the checked Include this location in the search. Click Next to continue. Select the RNDPLUS Touch USB Driver (oem25.inf) in the hardware list and click Next. If a Hardware Installation warning displays about the driver not passing Windows Logo testing, click Continue Anyway. 7. When prompted that files are needed from the IR Touch Controller Installation Disk, browse to the location of the file and click OK. 8. When the wizard finishes installing the software, click Finish to close the wizard. To Uninstall the Touch Monitor driver:
1. 2. Select Start > Programs > Uninstall iNexio Touch Driver to open the IR Touch Driver Setup Maintenance program and modify or uninstall the current installation. Select the Remove option to remove all installed features and click Next. 3. Click Yes to confirm you want to remove the touch driver. 4. Select Yes and click Finish to restart the computer to complete the uninstall process. NOTE: This version of the touch driver software supports USB controllers. The USB terminal supports USB 2.0 and full speed (12Mbps). Driver and Configuration Control Panel Utility With the Touch Control Panel utility, you can configure the full touch screen functionality for all software applications running under Microsoft Windows. The setup and configuration options are grouped on seven tabs labeled Touch Device, Information, Setup, Multipoint Touch, Options/Tools, Popup Control, Popup Control Menu and Multi Monitor Display. Each tab provides additional settings that may be modified for a specific application or user. The settings and options you select will depend on those application and user requirements. Opening the Touch Utility Double-click the iNexio Driver icon on the desktop or select Start >
Programs -iNexio > iNexio Touch Driver to open the Driver and Configuration Control Panel Utility. Click on the following seven tabs to configure the touch Driver. Touch Device The Touch Device tab displays setting information. It displays the Port No., Firmware Version, Device name, Comm. Device settings. Information The Information tab displays the copyright and warning information about the Touch Monitor Driver. Setup The Setup tab displays the setup options available to select or modify touch properties related to mode, sound, speed, area, action and rotation. Sound effect ENWW Driver and Configuration Control Panel Utility 33 In the Sound effect section, the Touch device has two button action modes labeled Touch down and Lift up. The No Sound mode is an option to mute the click sound. Select from the three Sound effect options:
No Sound Select to mute the sound when you Touch down or Lift up your finger from the touch screen. Touch down Select for the action and sound to occur when you Touch down. Enables you to create an immediate button action as soon as you touch the screen. Touching in this mode causes a button down action at the cursor location, followed by a short pause and then a button up action. You can leave your finger on the screen but only a single touch is registered until you lift your finger off the screen and touch down again to create a double-
click action. NOTE: Touching the screen is equivalent to pressing and releasing the mouse button. The action occurs as soon as you touch the screen. This mode is the best for button based applications, like a calculator. Lift up Select for the action and sound to occur when you Lift up. Enables you to position the cursor where you want before creating a button action. Touch in the Lift up mode causes the cursor to follow your finger for more accurate touch. When you want to select an item, lift your finger off the screen to cause a button down action at the cursor location, which is followed by a short pause and then the button up occurs. NOTE: Touching the screen is equivalent to moving the mouse position. The button down/
button up action occurs when you remove your finger from the screen. This mode is useful for applications requiring greater accuracy because it lets you carefully position the cursor prior to acting on it. Sound Tone/Sound Frequency Move the Low/High slider to adjust the tone of the sound. Move the Short/Long slider to adjust the duration of the sound. Double Click Speed Move the slider to define how fast or slow you need to touch in order to produce a double-click. Double Click Area Move the slider to define the space in which you must touch in order to produce a double-click. Double Click Test Click to test the double-click speed and area specified in Double Click Speed and Double Click Area. Touch Action Select either the Drawing Mode or the Touch only Mode to customize your Touch Monitor with the applications it will control. Drawing Mode Select if graphic illustration applications are used, especially where drawing and dragging are important. In Drawing Mode, a touch is equivalent to pressing and holding down the mouse button. Consider using this mode when immediate reaction to touch is most important. In this mode, lifting off is equivalent to releasing the mouse button. Touch only Mode Select if clicking type actions are only needed for navigating in the application. Drawing and/or dragging are not supported in this mode. Touch Rotation Select the proper degree to adjust the touch (cursor) position, in the case of a touch screen not properly mounted on the display. 34 Chapter 5 Operating the Touch Screen ENWW Multipoint Touch The Multipoint Touch displays the default configuration that can be modified to adjust the touch parameters related to applications, touch order, and modifying size of the touch object. Enable Mouse Action By default, touch action can be recognized on all Windows programs. By disabling this option, the touch is no longer recognized on all Windows programs. You can also use the Popup Control Menu to enable the function again. First Touch Only By default, the first touch point is not disturbed by the second touch while the first touch remains on the touch screen. Enable Multi-Touch Limit The size of a touch object can be adjusted in the X-Width Limit and Y-Width Limit functions described below. NOTE: The touch driver has the area recognition function on Single and Multipoint touch. With the X-Width Limit and Y-Width Limit functions, the size of a touch object can be adjusted on X Y limit in connection with Enable Multi-Touch Limit. Allow XY range Check to allow the XY range to be recognized within the size of the specified X-width and Y-width limits. Limit XY range Check to allow the XY range to be recognized without the size of the specified X-width and Y-width limits. X-Width Limit Move the right and left slider arrows to specify the Start and End range to define the X-Width Limit. Y-Width Limit Move the right and left slider arrows to specify the Start and End range to define the Y-Width Limit. Option/Tools The Options/Tools tab displays the tools available to calibrate and test the touch screen properties. Right Button Click the Right Button tool to open a Windows right mouse button simulation on the touch screen. When this application is run, it displays a typical two-button mouse icon in a small window on the desktop. The Right Button tool can also be opened from the Start menu. Select Start > All Programs > Touch Click Control. By default, the Right Button shows the left button shaded, indicating that the left button is active. Touch the desktop or an application and it will produce a left-click consistent with the Button settings in the Control Panel. Touch the Right Button and the shading will change to show the right mouse button active. Touch the desktop or an application and it will produce a right-click. Touch Calibration Use this tool to calibrate the touch screen. NOTE: The calibration process aligns the touch screen with the underlying monitor images. Specifically, calibration defines the dimensions of the active area of the touch screen and locates the center of the touch screen. If the screen is not calibrated, the active area of the touch screen may not be aligned properly or may be unnecessarily small in size. Once calibrated, the information is saved by the touch screen for each video resolution. Therefore, you only need to re-calibrate the touch screen the first time you change to a particular video resolution. ENWW Driver and Configuration Control Panel Utility 35 Clicking Auto calibration runs a calibration process automatically based on the resolution without user interaction. For more accuracy, use the following instructions and also refer to the following Fine Coordinate Correction function section. Click Calibration. This starts the calibration process. When the black screen displays, a blinking circle guides you through the calibration process pointing to the appropriate target. Touch the screen with your fingertip positioned at the center of the circle. The circle will stop blinking and display a white filled circle. Touch each additional calibration target until all the circles stop blinking. After this action, the process ends and the calibration screen closes. Figure 5-1 Touch Calibration Screen CAUTION:
If you accidentally touched the screen in the wrong place during calibration, this will distort the touch screen calibration. Test to make sure you are satisfied with the calibration results. Drawing Test Tool Use this tool to test calibration and to determine if you need more accuracy provided by the Fine Coordinate Correction function. This program is for drawing test purposes and is available only in Drawing Mode. Single-point Select Single-point and click Touch Test to test with your finger on the touch screen. Figure 5-2 Single-point Touch Test 36 Chapter 5 Operating the Touch Screen ENWW Multi-point Select Multi-point and click Touch Test to test with your fingers and palms simultaneously on the touch screen. When testing in Multi-point, the parts of area cognition and multi-points are shown in red circles. Figure 5-3 Multi-point Touch Test with Palms Figure 5-4 Multi-point Touch Test with Fingers ENWW Driver and Configuration Control Panel Utility 37 Multi-point Touch Test (First Touch Only) As you perform the multi-point touch test and when touch points are at the same axis of X or Y coordinates, the second touch point is not shown. This result is purposely programmed to not recognize the second touch in this context. Figure 5-5 Multi-point Touch Test First Touch Only 38 Chapter 5 Operating the Touch Screen ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Multitouch View Use this tool as a reference when developing software for the Touch Monitor with the API (Application Program Interface). Select either Multi-point or Single-
point and click Multitouch View and touch the screen with your fingers or palms simultaneously. The test shows the area of LED sensors that are recognized upon touch. Figure 5-6 Using Multitouch View with Palms There are virtual images besides the real touch point when fingers are positioned at different X or Y coordinates. The virtual images move in regulation according to the real touch points. Content developers should refer to this virtual image regulation. Figure 5-7 Virtual Image Regulation ENWW Driver and Configuration Control Panel Utility 39 Multitouch View (Second Touch active) The second touch is shown at the same axis of X or Y coordinates for reference for developers. Figure 5-8 Multitouch View First and Second Touch active Fine Coordinate Correction After you calibrate the touch screen, the Touch Point (2) and cursor should be located directly underneath your finger when you touch the screen. However, you may prefer to offset the Optical Point (1) or cursor slightly above your touch point so you can see the cursor and point more easily and precisely to small objects. The Touch Cursor Shift option lets you define the distance between your fingertip and the position of the cursor on the screen. Offsetting the cursor is helpful when selecting small items, such as single letters in word processing, check boxes, or radio buttons. Click [Up] [Down] [Left] [Right] to make X or Y offset. Click Reset to restore to default. Figure 5-9 Offsetting Optical Point from Touch Point Screen Shift Correction It is possible for the screen image to extend beyond the edge of the monitor bezel. In this case, it may be difficult to touch items at the left and right edges of the screen. Normally a monitor has an auto scaling function to correct. However, you can use the Screen shift function to adjust the auto scaled image for more accuracy. Click [X Zoom (+or-)] and [Y Zoom
(+or-)] to adjust the screen image. Click Reset to restore to default. 40 Chapter 5 Operating the Touch Screen ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Popup Control The Popup Control tab displays the parameter controls to enable the Popup Control Menu and specify how and where it can open from the touch screen. Popup Control START / STOP Click to start or stop the Popup Control Menu. Popup Activate Area Specify the active areas to touch to open the Popup Control Menu on the touch screen. The Popup Control Menu displays on the screen when you touch your finger on the activated areas in the Popup Active Area and remove your finger after the fixed time specified in the Popup Activate Time. Area Allow Percent Use the slider bars on the X Area Allow and Y Area Allow to specify the size of area where you touch the screen to open the Popup Control Menu. Popup Activate Time Specify the seconds required to touch down and then lift up your finger before thePopup Control Menuwill open. Specifying a time delay prevents random touches from opening the Popup Control Menu. Popup Control Menu The Popup Control Menu can be displayed by the user once it is configured and started in Popup Control tab in the touch driver. The following items are shown in the menu for quick user access. Disable Mouse Action Touch action is not recognized on all programs on the screen. By re-
click, the option is back to the basic function. Enable Touch Area Limit The size of a touch object can be adjusted on X Y limit. Open Touch Control Panel Click for the Touch Control Panel to display. Exit Click to close the Popup Control Menu. Multi Monitor Display The Multi Monitor Display tab displays the options to map the monitor and touch screen together and to activate and configure multi-monitor support. When mapping multiple monitors, you must map each touch screen to a monitor in the Touch Devices Monitor Mapping window. Click Mapping>> and double-click the icon of the desired monitor. You must do this in order to individually calibrate and configure each touch screen connected to your system. In Multi-monitor mode, check Support multiple monitors to activate this option. Select Clone mode, Independent mode, or Stretch mode depending on your required configuration. Clone Mode Select to make one of the monitors as the primary one. All other monitors have the same image as the primary monitor. The touch screen on each monitor functions as clone mode too. Independent Mode Select to make all screens show the same image and the touch screen on each monitor functions independently. Stretch Mode Select to make all screens combine as a single image. In this mode the touch screen on each monitor functions independently. ENWW Driver and Configuration Control Panel Utility 41 A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution No image is displayed. Power cord not connected. Be sure the power cord is properly connected to the outlet. Verify that the outlet has power to it. Check that the fuse or breaker has not tripped or burned out. See if the power switch is turned on. May need service. Power is on, power indicator is blue, but the screen appears extremely dark. Screen needs adjustments. Adjust brightness and contrast again. Power indicator is amber. Monitor in power saving mode. Out of Range message appears. Input signal is out of frequency range. Backlight may need repair. Move the mouse or press any key on the keyboard. Turn off equipment and then back on. The signal from the PC (video card) is out of the vertical or horizontal frequency range of the monitor. Adjust the frequency range by referring to the specifications in this manual (maximum resolution: RGB - 1920 x 1080 @ 60Hz;
HDMI - 1920 x 1080 @ 60Hz). NOTE: Vertical Frequency - to enable the user to watch the monitor display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is measured in Hz. Horizontal Frequency - the horizontal interval is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is measured in kHz. 42 Appendix A Troubleshooting ENWW Problem Possible Cause Solution Check signal cable message appears. Signal cable is not connected. Unknown Product message appears when the monitor is connected. Monitor driver is not installed. Key Lock On message appears when pressing the Menu button. Key Lock function is turned on. The screen looks abnormal; screen position is wrong. Screen is out of adjustment. Lines appear on the background screen. Screen is out of adjustment. Horizontal noise appears or the characters look blurred. Screen is out of adjustment. The screen displays abnormally. Using an incorrect Input signal. An after image appears when the monitor is turned off. Using a fixed image too long. The signal cable between the PC and monitor is not connected. Check the signal cable. Press the INPUT button on the remote control to check the input signal. Install the monitor driver, which is provided with the monitor or download from the HP Web site
(http://www.hp.com). See if the plug & play function is supported by referring to the video cards user manual. The control locking function prevents unintentional OSD setting change due to careless usage. To unlock the controls, simultaneously press the Menu button and button for several seconds. (You cannot set this function using the remote control buttons. You can set this function in the monitor only.) D-sub analog signal - press the AUTO button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, use the Position OSD menu. Check that the video card resolution and frequency are supported by the monitor. If the frequency is out of range, set to the recommended resolution in the Control Panel > Display > Setting menu of the operating system. D-sub analog signal - press the AUTO button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, use the Clock OSD menu. D-sub analog signal - press the AUTO button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, use the Phase OSD menu. The proper input signal is not connected to the signal port. Connect the signal cable that matches with the source input signal. If you used a fixed image for a long time, the pixels may be damaged. Use a screen-saver function. ENWW Solving Common Problems 43 Problem No sound. Sound is too dull. Sound is too low. Possible Cause Solution Audio cable not connected. Check that the audio cable is properly connected. Adjust the volume. Check if the sound is set properly. Equalizer is not balanced. Select the appropriate sound equalize. Sound needs adjusting. Screen has poor color resolution (16 colors). Color is not set correctly. Screen color is unstable or monocolored. Signal cable or video card connection is loose. Black spots appear on the screen. Characteristics of the LCD panel. Adjust the volume by pressing the volume buttons on the remote control. Set the number of colors to more than 24 bits (true color). Select Control Panel >
Display > Settings > Color table menu in the operating system. Check the connection status of the signal cable or reinsert the PC video card. Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. The power suddenly turned off. Sleep timer setting turned on or power interrupted. Check that the sleep timer is set. Check the power control settings. If power is turned off after the message, CAUTION! FAN ERROR! appears, the fan is out of order. Contact your local service center. Using the Worldwide Web For the online access to technical support information, self-solve tools, online assistance, community forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to http://www.hp.com/support Preparing to Call Technical Support If you can not solve a problem using the troubleshooting tips in this section, you may need to call technical support. Contact your regional HP authorized service provider. Have the following information available when you call:
Monitor model number Serial number for the monitor Purchase date on invoice Conditions under which the problem occurred Error messages received Hardware configuration Hardware and software you are using 44 Appendix A Troubleshooting ENWW B Technical Specifications NOTE: All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance may vary either higher or lower. HP LD4200tm LCD Monitor Table B-1 HP LD4200tm Specifications Display Type Viewable Image Size Pixel Pitch Maximum Weight Without Stand & Speaker With Speaker With Stand With Stand & Speaker Dimensions (Without Stand & Speaker) Height Depth Width Dimensions (With Speaker) Height Depth Width Dimensions (With Stand) Height Depth Width 106.73 cm TFT LCD 106.73 cm diagonal 0.681 mm x 0.681 mm 42 inches 42-inch diagonal 30.18 kg 30.98 kg 33.44 kg 34.24 kg 59.14 cm 12.14 cm 99.9 cm 59.14 cm 12.14 cm 99.9 cm 68.0 cm 29.3 cm 99.9 cm 66.53 lbs. 68.30 lbs. 73.72 lbs. 75.49 lbs. 23.2 inches 4.7 inches 39.3 inches 23.2 inches 4.7 inches 39.3 inches 26.7 inches 11.5 inches 39.3 inches ENWW HP LD4200tm LCD Monitor 45 Table B-1 HP LD4200tm Specifications (continued) Dimensions (With Stand & Speaker) Height Depth Width Power Rated Voltage Power Consumption On Mode Sleep Mode Off Mode Maximum Resolution RGB HDMI/DVI Recommended Resolution RGB HDMI/DVI Horizontal Frequency RGB HDMI/DVI Vertical Frequency RGB HDMI/DVI Synchronization Type Input Connector Environmental Conditions Operating Temperature Storage Temperature Audio (Select Models) RMS Audio Output Input Sensitivity Speaker Impedance 26.7 inches 11.5 inches 39.3 inches 68.0 cm 29.3 cm 99.9 cm AC 100-240V ~50/60Hz 2.2 A 220W Typical 1W (RGB) / 4W (HDMI/DVI) 1W 1920 x 1080 @ 60Hz 1920 x 1080 @ 60Hz (if supported by OS or video card type) 1920 x 1080 @ 60Hz 1920 x 1080 @ 60Hz (if supported by OS or video card type) 30 - 83kHz 30 - 83kHz 56 - 76Hz 56 - 60Hz Composite/Separate/Digital 15-pin D-Sub type, HDMI (digital), S-Video, Composite Video, Component, RS-232C 0 ~ 35 C, Humidity 10% ~ 80%
-20 ~ 60 C, Humidity 5% ~ 90%
10W + 10W (R+L) 0.7 rms 8 Ohms 46 Appendix B Technical Specifications ENWW Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. HP LD4200tm Preset Display Modes Table B-2 HP LD4200tm Factory Preset Display Modes Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 1 2
*3 4
*5 6 7
*8 9
*10
*11
*12
*13
*14 15 16
*17
*18 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1280 x 720 1280 x 768 1360 x 768 1366 x 768 1280 x 1024 1280 x 1024 1600 x 1200 1680 x 1050 1920 x 1080 31.469 31.468 31.469 37.5 37.879 46.875 49.725 48.363 60.123 44.772 47.7 47.72 47.4 63.981 79.98 75 65.290 67.5 70.8 70.8 59.94 75 60.317 75 74.55 60 75.029 59.855 60 54.799 60 60.02 75.02 60 60 60 1 ~18 RGB Mode
* HDMI/DVI Mode DTV Mode 480i 480p 720p Component HDMI/DVI (DTV) o o o x o o ENWW Recognizing Preset Display Resolutions 47 1080i 1080p Component HDMI/DVI (DTV) o o o o NOTE: DTV/PC selection on RGB and HDMI/DVI inputs is availabe for PC resolutions 640 x 480/60Hz, 1280 x 720/60Hz, 1920 x 1080/60Hz and DTV resolutions: 480p, 720p, 1080p. Power Indicator Mode On Mode Sleep Mode Off Mode Indicator Light Blue Amber 48 Appendix B Technical Specifications ENWW C Controlling the Multiple Product Use this method to connect several monitors to a single computer. You can control several monitors at a time by connecting them to a single computer. Connecting the Cable Connect the RS-232C cable as shown in the following illustration. The RS-232C protocol is used for communication between the computer and the monitor. You can turn the monitor on/off, select an input source or adjust the OSD menu from the computer. RS-232C Configurations 7-Wire Configurations
(Standard RS-232C cable) PC Monitor RXD 2 TXD 3 GND 5 DTR 4 DSR 6 RTS CTS 7 8 3 2 5 6 4 8 7 D-Sub
(Female) D-Sub 9
(Female) TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations
(Not Standard) PC RXD 2 TXD 3 GND 5 DTR 4 DSR 6 RTS CTS 7 8 D-Sub
(Female) Monitor 3 TXD 2 RXD 5 GND 6 DSR 4 DTR 8 CTS 7 RTS D-Sub 9
(Female) ENWW Connecting the Cable 49 Communication Parameter Baud Rate: 9600buadRate (UART) Data Length: 8bits Parity Bit: None Stop Bit: 1bit Flow Control: None Communication Code: ASCII code Use a crossed (reverse) cable Command Reference List 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Lock/ key Lock 14. Balance 15. Color Temperature 16. Abnormal state 17. ISM mode 18. Auto configuration 19. Key 20. Tile Mode 21. Tile H Position 22. Tile V Position 23. Tile H Size COMMAND1 COMMAND2 DATA1 DATA2 DATA3 k k k k k k k k k k k k k k k k j j m d d d d a b c d e f g h i j k l m t u z p u c d e f g 00H -01H 02H -09H 01H -09H 00H -01H 00H -01H 00H -64H 00H -64H 00H -64H 00H -64H 00H -64H 00H -64H 00H -01H 00H -01H 00H -64H 00H -03H FFH 00H -10H 01H Key Code 00H -55H 00H -64H 00H -64H 00H -64H 50 Appendix C Controlling the Multiple Product ENWW 24. Tile V Size 25. Tile ID Set 26. Natural Mode (In Tilemode) 27. Elapsed time return 28. Temperature value 29. Lamp fault check 30. Auto Volume 31. Speaker 32. Time 33. On Timer (On/Off Timer) On, Off 34. Off Timer (On/Off Timer) On, Off 35. On Timer (On/Off Timer) Time 36. Off Timer (On/Off Timer) Time 37. Sleep Time 38. Auto Sleep 39. Power On Delay 40. Language 41. DPM Select 42. Reset 43. S/W Version 44. Input Select COMMAND1 COMMAND2 DATA1 DATA2 DATA3 d d d d d d d d f f f f f f f f f f f f x h i j l n p u v a b c d e f g h i j k z b 00H -64H 00H -19H 00H -01H FFH FFH FFH 00H -01H 00H -01H 00H -06H 00H, FFH 00H, FFH 00H -07H 00H -07H 00H -08H 00H -01H 00H -64H 00H -09H 00H -01H 00H -02H FFH 20H -A0H 00H - 17H 0 - 3BH 00H - 17H 00H - 17H 00 - 3BH 00 - 3BH Transmission / Receiving Protocol Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*[Command 1]: First command. (k)
*[Command 2]: Second command.(a ~ u)
*[Set ID]: Set up the Set ID number of product. range : 01H~63H. by setting '00H', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack message. Because all sets will send the ack message, so it's impossible to check the whole ack messages. ENWW Transmission / Receiving Protocol 51
*[DATA]: To transmit command data. Transmit 'FF' data to read status of command.
*[Cr]: Carriage Return ASCII code 0x0D
*[ ]: ASCII code Space (0x20) OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
*The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is in data read mode, it indicates present status data. If the data is in data write mode, it returns the data of the PC computer. Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
*If there is error, it returns NG 01. Power (Command : a) To control Power On/Off of the Set. Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off 1 : Power On Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off. Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
52 Appendix C Controlling the Multiple Product ENWW Data 0 : Power Off 1 : Power On 02. Input Select (Command : b) (Main Picture Input) To select input source for the Set. You can also select an input source using the INPUT button on the remote control. Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 2: AV 4 : Component 1 5 : Component 2 7 : RGB (PC) 8 : HDMI (DTV) 9 : HDMI (PC) Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 2 : AV 4 : Component 1 5 : Component 2 7 : RGB (PC) 8 : HDMI (DTV) 9 : HDMI (PC) 03. Aspect Ratio (Command : c) (Main picture format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu. Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 1 : Normal Screen (4:3) 2 : Wide Screen (16 :9) ENWW Transmission / Receiving Protocol 53 4 : Zoom1 (AV) 5 : Zoom2 (AV) 6 : Original (AV) 7 : 14:9 (AV) 9 : Just Scan(HD DTV), 1:1 (RGB PC, HDMI/DVI PC) Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
04. Screen Mute (Command : d) To select screen mute on/off. Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command : e) To control On/Off of the Volume Mute. Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) 54 Appendix C Controlling the Multiple Product ENWW 06. Volume Control (Command : f) To adjust Volume. Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H
(Hexadecimal code) Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H Refer to Real data mapping in this appendix. 07. Contrast (Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H Refer to Real data mapping as shown below. Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
* Real data mapping 0 : Step 0
A : Step 10
F : Step 15 10 : Step 16
ENWW Transmission / Receiving Protocol 55 64 : Step 100 08. Brightness (Command : h) To adjust screen brightness. You can also adjust the brightness in the Picture menu. Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H Refer to Real data mapping as shown below. Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Real data mapping 0 : Step
A : Step 10
F : Step 15 10 : Step 16
64 : Step 100 09. Color (Command : i) (Video only) To adjust the screen color. You can also adjust the color in the Picture menu. Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code) Refer to Real data mapping in the previous section of this appendix. Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
56 Appendix C Controlling the Multiple Product ENWW Data Min : 00H ~ Max : 64H 10. Tint (Command : j) (Video only) To adjust the screen tint. You can also adjust the tint in the Picture menu. Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00H ~ Green: 64H (Hexadecimal code) Refer to Real data mapping in the previous section of this appendix. Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Red: 00H ~ Green: 64H
* Tint Real data mapping 0 : Step 0 - Red
64 : Step 100 - Green 11. Sharpness (Command : k) (Video only) To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu. Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H
(Hexadecimal code) Refer to Real data mapping in the previous section of this appendix. Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H 12. OSD Select (Command : l) To control OSD on/off to the set. ENWW Transmission / Receiving Protocol 57 Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD Off 1 : OSD On Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0 : OSD Off 1 : OSD On 13. Remote Lock /Key Lock (Command : m) To control Remote Lock on/off to the set. This function, when controlling RS-232C, locks the remote control and the local keys. Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Off 1 : On Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0 : Off 1 : On 14. Balance (Command : t) To adjust the sound balance. Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H
(Hexadecimal code) Refer to Real data mapping in the previous section of the appendix Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
58 Appendix C Controlling the Multiple Product ENWW Data Min : 00H ~ Max : 64H Balance : L50 ~ R50 15. Color Temperature (Command : u)v To adjust the screen color temperature. Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : Medium 1 : Cool 2 : Warm 3 : User Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0 : Medium 1 : Cool 2 : Warm 3 : User 16. Abnomal state (Command : z) Abnormal State : Used to Read the power off status when Stand-by mode. Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read 0 : Normal (Power on and signal exist) 1 : No signal (Power on) 2 : Turn the monitor off by remote control 3 : Turn the monitor off by sleep time function 4 : Turn the monitor off by RS-232C function 8 : Turn the monitor off by off time function ENWW Transmission / Receiving Protocol 59 9 : Turn the monitor off by auto off function Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
17. ISM mode (Command: j p) Used to select the afterimage preventing function. Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 1H : Inversion 2H : Orbiter 4H : White Wash 8H : Normal 10H : Dot Wash Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
18. Auto Configure (Command: j u) To adjust picture position and minimize image shaking automatically. It works only in RGB(PC) mode. Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1 : To set auto configure Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key (Command : m c) To send IR remote key code. Transmission
[m][c][ ][Set ID][ ][Data][Cr]
60 Appendix C Controlling the Multiple Product ENWW Data Key code : Refer to page IR Codes Table. Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
20. Tile Mode (Command : d d) Change a Tile Mode. Transmission
[d][d][][Set ID][][Data][Cr]
Data Description 00 12 13 14
... 55 Tile mode is off. 1 x 2 mode(column x row) 1 x 3 mode 1 x 4 mode
... 5 x 5 mode
*The data can not be set to 0X or X0 except 00 Acknowledgement
[d][][Set ID][][OK/NG][Data][x]
21. Tile H Position (Command : d e) To set the Horizontal position. Transmission
[d][e][][Set ID][][Data][Cr]
Data Min : 00H ~ Max : 64H Acknowledgement
[e][][Set ID][][OK/NG][Data][x]
ENWW Transmission / Receiving Protocol 61 22. Tile V Position (Command : d f) To set the Vertical position. Transmission
[d][f][][Set ID][][Data][Cr]
Data Min : 00H ~ Max : 64H Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
23. Tile H Size (Command : d g) To set the Horizontal size. Transmission
[d][g][][Set ID][][Data][Cr]
Data Min : 00H ~ Max : 64H Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
24. Tile V Size (Command : d h) To set the Vertical size. Transmission
[d][h][][Set ID][][Data][Cr]
Data Min : 00H ~ Max : 64H Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
25. Tile ID Set (Command : d i) To assign the Tile ID for Tiling function. Transmission 62 Appendix C Controlling the Multiple Product ENWW
[d][i][][Set ID][][Data][Cr]
Data Min : 00H ~ Max : 19H
(Hexadecimal code) Acknowledgement
[i][][Set ID][][OK/NG][Data][x]
26. Natural Mode (In Tilemode) (Command : d j) The image is omitted by the distance between the screens to be naturally shown. Transmission
[d][j][][Set ID][][Data][Cr]
Data 0 : Natural Off 1 : Natural On ff : Read Status Acknowledgement
[j][][Set ID][][OK/NG][Data][x]
27. Elapsed time return (Command : d l) To read the elapsed time. Transmission
[d][l][][Set ID][][Data][Cr]
* The data is always FF(in Hex). Acknowledgement
[l][][Set ID][][OK/NG][Data][x]
* The data means used hours. (Hexadecimal code) 28. Temperature value (Command : d n) To read the inside temperature value. ENWW Transmission / Receiving Protocol 63 Transmission
[d][n][][Set ID][][Data][Cr]
* The data is always FF(in Hex). Acknowledgement
[n][][Set ID][][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal. 29. Lamp fault Check (Command : d p) To check lamp fault. Transmission
[d][p][][Set ID][][Data][Cr]
* The data is always FF(in Hex). Acknowledgement
[p][][Set ID][][OK/NG][Data][x]
Data 0 : Lamp Fault 1 : Lamp OK 30. Auto volume (Command : d u) Automatically adjust the volume level. Transmission
[d][u][][Set ID][][Data][Cr]
Data 0 : Off 1 : On Acknowledgement
[u][][Set ID][][OK/NG][Data][x]
64 Appendix C Controlling the Multiple Product ENWW 31. Speaker (Command : d v) Turn the speaker on or off. Transmission
[d][v][][Set ID][][Data][Cr]
Data 0 : Off 1 : On Acknowledgement
[v][][Set ID][][OK/NG][Data][x]
32. Time (Command : f a) Set the current time. Transmission
[f][a][][Set ID][][Data1][][Data2][][Data3][Cr]
[Data1]
0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday
[Data2]
0H~17H (Hours)
[Data3]
00H~3BH (Minutes) Acknowledgement
[a][][Set ID][][OK/NG][Data1][Data2][Data3][x]
ENWW Transmission / Receiving Protocol 65
*When reading data, FFH is inputted for [Data1], [Data2] and [Data3]. In other cases, all are treated as NG. 33. On Timer (On/Off Timer) On, Off (Command : F b) Set days for On Timer. Transmission
[f][b][][Set ID][][Data1][][Data2][Cr]
[Data1]
0 (Write), FFH(Read)
[Data2]
00H~FFH bit0 : Monday On Timer On(1), Off(0) bit1 : Tuesday On Timer On(1), Off(0) bit2 : Wednesday On Timer On(1), Off(0) bit3 : Thursday On Timer On(1), Off(0) bit4 : Friday On Timer On(1), Off(0) bit5 : Saturday On Timer On(1), Off(0) bit6 : Sunday On Timer On(1), Off(0) bit7 : Everyday On Timer On(1), Off(0) Acknowledgement
[b][][Set ID][][OK/NG][Data1][Data2][x]
34. Off Timer (On/Off Timer) On, Off (Command : f c) Set days for Off Timer. Transmission
[f][c][][Set ID][][Data1][][Data2][Cr]
[Data1]
0 (Write), FFH(Read)
[Data2]
00H~FFH 66 Appendix C Controlling the Multiple Product ENWW bit0 : Monday Off Timer On(1), Off(0) bit1 : Tuesday Off Timer On(1), Off(0) bit2 : Wednesday Off Timer On(1), Off(0) bit3 : Thursday Off Timer On(1), Off(0) bit4 : Friday Off Timer On(1), Off(0) bit5 : Saturday Off Timer On(1), Off(0) bit6 : Sunday Off Timer On(1), Off(0) bit7 : Everyday Off Timer On(1), Off(0) Acknowledgement
[c][][Set ID][][OK/NG][Data1][Data2][x]
35. On Timer (On/Off Timer) Time (Command : f d) Set On Timer. Transmission
[f][d][][Set ID][][Data1][][Data2][Data3][Cr]
[Data1]
0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 : Everyday
[Data2]
00H~17H (Hours)
[Data3]
00H~3BH (Minutes) Acknowledgement
[d][][Set ID][][OK/NG][Data1][Data2][Data3][x]
ENWW Transmission / Receiving Protocol 67
*When reading data, FFH is inputted for [Data2], [Data3]. In other cases, all are treated as NG. 36. Off Timer (On/Off Timer) Time (Command : f e) Set Off Timer. Transmission
[f][e][][Set ID][][Data1][][Data2][][Data3][Cr]
[Data1]
0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 : Everyday
[Data2]
00H~17H (Hours)
[Data3]
00H~3BH (Minutes) Acknowledgement
[e][][Set ID][][OK/NG][Data1][Data2][Data3][x]
* When reading data, FFH is inputted for [Data2], [Data3]. In other cases, all are treated as NG. 37. Sleep Time (Command : f f) Set Sleep Time. Transmission
[f][f][][Set ID][][Data][Cr]
Data 0 : Off 68 Appendix C Controlling the Multiple Product ENWW 1 : 10 2 : 20 3 : 30 4 : 60 5 : 90 6 : 120 7 : 180 8 : 240
(Orderly) Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
38. Auto Sleep (Command : f g) Set Auto Sleep. Transmission
[f][g][][Set ID][][Data][Cr]
Data 0 : Off 1 : On Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
39. Power On Delay (Command : f h) Set the schedule delay when the power is turned on (Unit: second). Transmission
[f][h][][Set ID][][Data][Cr]
Data : 00H ~ 64H (Data value) Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
ENWW Transmission / Receiving Protocol 69 40. Language (Command : f i) Set the OSD language. Transmission
[f][i][][Set ID][][Data][Cr]
Data 0 : English 1 : France 2 : Deutch 3 : Spanish 4 : Italian 5 : Portuguese 6 : Chinese 7 : Japanese 8 : Korean 9 : Russian Acknowledgement
[i][][Set ID][][OK/NG][Data][x]
41. DPM Select (Command : f j) Set the DPM (Display Power Management) function. Transmission
[f][j][][Set ID][][Data][Cr]
Data 0 : Off 1 : On Acknowledgement
[j][][Set ID][][OK/NG][Data][x]
42. Reset (Command : f k) Execute the Picture, Screen and Factory Reset functions. 70 Appendix C Controlling the Multiple Product ENWW Transmission
[f][k][][Set ID][][Data][Cr]
Data 0 : Picture Reset 1 : Screen Reset 2 : Factory Reset Acknowledgement
[k][][Set ID][][OK/NG][Data][x]
43. S/W Version (Command : f z) Check the software version. Transmission
[f][z][][Set ID][][Data][Cr]
Data FFH : Read Acknowledgement
[z][][Set ID][][OK/NG][Data][x]
44. Input Select (Command : x b) To select input source for the Set. Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20H : AV 40H : Component 1 41H : Component 2 60H : RGB (PC) 90H : HDMI/DVI (DTV) A0H : HDMI/DVI (PC) ENWW Transmission / Receiving Protocol 71 Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 20H : AV 40H : Component 1 41H : Component 2 60H : RGB (PC) 90H : HDMI/DVI (DTV) A0H : HDMI/DVI (PC) IR Codes Use this method to connect your wired remote control port on the monitor. Remote Control IR Code Output Wave Single pulse, modulated with 37.9KHz signal at 455kHz Carrier Frequency FCAR = 1/Tc=fosc/12 Duty Ratio = T1/Tc = 1/3 Configuration of Frame First Frame Repeat Frame 72 Appendix C Controlling the Multiple Product ENWW Lead Code Repeat Code Bit Description Bit 0 Bit 1 Frame Interval: Tf The waveforem is transmitted as long as a key is depressed. IR Codes Table Code(Hexa) Function 00 01 02 03 08 C4 C5 09 98 0B 0E VOL() VOL() Note R/C Button R/C Button R/C Button R/C Button POWER ON/OFF R/C Button (Power On/Off) POWER ON POWER OFF Discrete IR Code (Only Power On) Discrete IR Code (Only Power On) MUTE AV INPUT SLEEP R/C Button R/C Button R/C Button R/C Button ENWW IR Codes 73 Code(Hexa) Function 43 5B 6E 44 10 11 12 13 14 15 16 17 18 19 5A BF D4 D5 C6 79 76 77 AF 99 MENU EXIT PSM SET Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 AV Note R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button Discrete IR Code(Input AV Selection) COMPONENT1 COMPONENT2 Discrete IR Code(Input COMPONENT1 Selection) Discrete IR Code(Input COMPONENT2 Selection) RGB PC HDMI/DVI ARC ARC (4:3) ARC (16:9) Discrete IR Code(Input RGB PC Selection) Discrete IR Code(Input HDMI/DVI Selection) R/C Button Discrete IR Code(Only 4:3 mode) Discrete IR Code(Only 16:9 mode) ARC (ZOOM) Discrete IR Code(Only ZOOM1, ZOOM2 mode) AUTO CONFIC Discrete IR Code 74 Appendix C Controlling the Multiple Product ENWW D Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with the FCC Logo (United States Only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. 2. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding the product, contact:
ENWW Federal Communications Commission Notice 75 Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact:
Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. European Union Regulatory Notice This product complies with the following EU Directives:
Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC Compliance with these directives implies conformity to applicable harmonized European standards
(European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family. This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth) This marking is valid for EU non-
harmonized Telecom products.
*Notified body number (used only if applicable refer to the product label). 76 Appendix D Agency Regulatory Notices ENWW Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany German Ergonomics Notice HP products which bear the GS approval mark, when forming part of a system comprising HP brand computers, keyboards and monitors that bear the GS approval mark, meet the applicable ergonomic requirements. The installation guides included with the products provide configuration information. Japanese Notice Korean Notice Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100120V or 200240V. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact an authorized HP service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japanese Power Cord Requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. ENWW German Ergonomics Notice 77 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Product Environmental Notices Materials Disposal This HP product contains mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities or the Electronic Industries Alliance (EIA) http://www.eiae.org. Disposal of Waste Equipment by Users in Private Household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling or waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact the local city office, the household waste disposal service or the shop where you purchased the product. Chemical Substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. HP Recycling Program HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/
recycle. Restriction of Hazardous Substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. 78 Appendix D Agency Regulatory Notices ENWW 11363-2006 11363-2006 Turkey EEE Regulation In Conformity with the EEE Regulation EEE Ynetmeliine Uygundur ENWW Product Environmental Notices 79
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-09-15 | JBP - Part 15 Class B Computing Device Peripheral | Class II permissive change or modification of presently authorized equipment | |
2 | 2008-12-01 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2009-09-15
|
||||
1 2 |
2008-12-01
|
|||||
1 2 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 2 | FCC Registration Number (FRN) |
0020917688
|
||||
1 2 | Physical Address |
1000 Sylvan Avenue
|
||||
1 2 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
BEJ
|
||||
1 2 | Equipment Product Code |
HSTND-2591-G
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
K******** H****
|
||||
1 2 | Title |
Director, Standards & Compliance
|
||||
1 2 | Telephone Number |
201-4********
|
||||
1 2 | Fax Number |
201-8********
|
||||
1 2 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | No | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | No | |||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/29/2009 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD MONITOR | ||||
1 2 | LCD Monitor | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
GUMI UNIVERSITY EMC CENTER
|
||||
1 2 | Name |
T****** P********
|
||||
1 2 | Telephone Number |
82-54********
|
||||
1 2 | Fax Number |
82-54********
|
||||
1 2 |
t******@gumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC