E N G L I S H www.lg.com OWNERS MANUAL LCD MONITOR Please read this manual carefully before operating the your set and retain it for future reference. LCD MONITOR MODEL IPS225V IPS235V 20 TROUBLESHOOTING 22 SPECIFICATIONS IPS225V IPS235V reset Modes (Resolution) Indicator 22 23 24 P 24 E N E G N L G I S H 2 TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPARING 3 4 6 6 6 7 8 Unpacking Parts and buttons Setting up the Monitor set
- Attaching the Stand Base
- Detaching the Stand Base
- Mounting on a table
- Mounting on a wall 10 USING THE MONITOR SET 10 Connecting to a PC
- D-SUB connection 10
- DVI-D connection 10 10
- HDMI connection 12 CUSTOMIZING SETTINGS 12 Accessing The Main Menus 13 Customizing Settings 13 14 15 16 16 17 18 19
- Menu Settings
- PICUURE
COLOR
-DISPLAY
-VOLUME
-OTHERE MODE Setting DUAL PACKAGE Setting ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. E N E G N L G I S H CD(Owner's Manual) /
Card Power Cord D-SUB Cable
(This signal cable may be attached to this product before shipping out.) DVI-D Cable
(This cable is not included in all countries.) Stand Base CAUTION y Do not use any unapproved accessories to ensure the safety and product life span. y Any damages or injuries by using unapproved accessories are not covered by the warranty. NOTE y The accessories supplied with your product may vary depending on the model. y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. y User should use shielded signal interface cables (RGB cable / DVI-D cable) with ferrite cores to maintain standard compliance for the product. 4 ASSEMBLING AND PREPARING Parts and buttons E N E G N L G S H I Power Indicator Lighting On: Turned on Lighting Off: Turned off
(Power Button) Button (See p.13) AC-IN/
D-SUB DVI-D HDMI Connection panel (See p.10) Button MENU MODE DUAL AUTO INPUT EXIT
(Power Button) ASSEMBLING AND PREPARING 5 Description Accesses the main menus.(See p.13) OSD LOCKED/
UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. Use this button to enter USER , MOVE,TEXT, PHOTO,sRGB menus.(See p.18) Use this button to enter DUAL MONITOR and DUAL WEB menus.(See p.19) When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 E N E G N L G S H I You can choose the input signal. When two input signals are connected, you can select the input signal (D-SUB/DVI/
When only one signal is connected, it is automatically detected. The default setting is HDMI) you want. D-SUB. Exit the OSD(On Screen Display). Turns the power on or off. Power Indicator The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks blue. 6 ASSEMBLING AND PREPARING E N E G N G L S H I Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Attach the Stand Base and then tighten the screw to the right with a Coin. Detaching the Stand Base and Body 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 Turn the screw to the left, and then pull out the Stand Base from the Stand Body. Stand Base Stand Base CAUTION This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. ASSEMBLING AND PREPARING 7 Mounting on a table WARNING 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. When you adjust the angle, do not hold the buttom of the Monitor set frame as shown on the following illustration, as may injure your fingers. E N E G N L G S H I 10 cm 10 cm 10 cm 10 cm 2 Connect the Power Cord to a wall outlet. 3 Press
(Power) button on the front switch panel to turn the power on. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. Do not touch or press the screen when adjusting the angle of the monitor. NOTE Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. 5 -
51 Front Rear 8 ASSEMBLING AND PREPARING Using the Kensington security system E N E G N L G I S H The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com. Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Connect the Kensington security system cable between the Monitor set and a table. 10 cm 10 cm 10 cm 10 cm NOTE The Kensington security system is optional. You can obtain it from most electronics stores. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. Please use VESA standard as below. y 784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm y 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad and screws. USING THE MONITOR SET 9 E N E G N L G I S H Model VESA (A x B) Standard screw Number of screws IPS225V/IPS235V 100 x 100 M4 4 CAUTION y Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. y If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. y Use only an authorized LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. y Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE y Use the screws that are listed on the VESA standard screw specifications. y The wall mount kit will include an installation manual and necessary parts. y The wall mount bracket is optional. You can obtain additional accessories from your local dealer. y The length of screws may differ depending on the wall mount. Be sure to use the proper length. y For more information, refer to the instructions supplied with the wall mount. 10 USING THE MONITOR SET USING THE MONITOR SET E N E G N L G I S H Connecting to a PC y Your Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. D-SUB DVI-D HDMI RGB OUT NOTE y When using a D-Sub signal input cable connector for Macintosh DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations. D-SUB DVI-D HDMI DVI OUT HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. D-SUB DVI-D HDMI y Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. HDMI OUT HDMI OUT NOTE y If you use HDMI PC, it can cause compatibility problem. USING THE MONITOR SET 11 Self Image Setting Function Press the power button on the front panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) E N E G N L G S H I CAUTION Connect the signal input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE NOTE When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/
DVI-D/HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear on the screen. This is normal.
"Self Image Setting" Function. This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) AUTO Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.
(Only supported in Analog Mode) 12 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing The Main Menus E N E G N G L S H I 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow (
) button. 4 Select EXIT to leave the OSD menu. Monitor set Buttons MENU(See p.13) Sets the screen options. DUAL (See p.19) Sets the screen . EXIT Exits the OSD menu. MONITOR SETUP MODE 1 2 MENU MODE DUAL AUTO INPUT EXIT MODE (See p.18) Sets the mode. AUTO (See p.11) Optimizes the resolution. INPUT Sets the external input. NOTE Different menu items are enabled depending on the type of input signal. D-SUB / DVI Mode: MENU, MODE, DUAL, AUTO, INPUT, EXIT CUSTOMIZING SETTINGS 13 E N E G N L G S H I Customizing Settings Menu Settings 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available progam settings are described below. Menu Sub-menu Analog Digital HDMI Description To adjust the brightness, contrast and sharpness of the screen To customize the color of the screen. To adjust the position of the screen To improve the clarity and stability of the screen To adjust the volume To customize the screen status for a user's operating environment PICTURE COLOR DISPLAY VOLUME OTHERS BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL COLOR TEMP
(PRESET/USER) GAMMA COLOR RESET HORIZONTAL VERTICAL CLOCK PHASE OVERSCAN LANGUAGE POWER INDICATOR WHITE BALANCE ORIGINAL RATIO SUPER ENEYGY SAVING FACTORY RESET Analog: D-SUB(Analog signal) input. Digital: DVI-D(Digital signal) input. HDMI: HDMI(Digital signal) input. E N E G N L G S H I 14 CUSTOMIZING SETTINGS PICTURE 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select PICTURE by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. Menu BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL Description To adjust the brightness of the screen. To adjust the contrast of the screen. To adjust the clearness of the screen. You can set the offset level. If you select 'HIGH', the screen will be bright and if you select LOW, the screen will be dark.
* Offset? As the criteria for video signal, it is the darkest screen the monitor can show.
(only for HDMI input) COLOR 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select COLOR by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. CUSTOMIZING SETTINGS 15 E N E G N L G S H I COLOR SIX COLOR USER WARM COLOR RESET 2.2 NO SIX COLOR RED HUE SATURATION The available picture settings are described below. Menu COLOR TEMP GAMMA COLOR RESEST Description PRESET Select the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (More blue). USER SIX COLOUR:
Sets and stores the hue and saturation for six colors(RED/GREEN/BLUE/CYA N/MAGENTA/YELLOW) to satisfy the color requirements of a user. HUE SATURATION Adjusts the screen hue. Adjusts the color sharpness on the screen. Lower values color and colors darker. make the sharpness weaker and colors lighter while sharpness stronger Set your own red color levels. Set your own green color levels. Set your own blue color levels. RED:
GREEN:
BLUE:
Set your own gamma value. :
display whitish images and low gamma values display blackish images. 1.8/2.0/2.2/2.4/2.6 On the monitor, high gamma values Resets the color settings to the factory default settings for the current input device. E N E G N L G S H I 16 CUSTOMIZING SETTINGS DISPLAY 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select DISPLAY by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. Menu HORIZONTAL VERTICAL CLOCK PHASE OVERSCAN Description To move image left and right. To move image up and down. To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen To select the range of output image for DTV timing in HDMI input. (only for HDMI input) Recommend overscan function to turn on when connect AV equipment. the image of characters. VOLUME 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select VOLUME by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. Menu VOLUME To adjust the volume of headphone/ Earphone. (Only for HDMI input) Description CUSTOMIZING SETTINGS 17 OTHER 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select OTHERS by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. ORIGINAL RATIO SUPER ENEYGY SAVING WIDE SUPER ENERGY SAVING ON OFF RESET SUPER SAVING
: 5 W/h LED SAVING
: 12 W/h TOTAL POWER REDUCTION: 20 W TOTAL CO2 REDUCTION:
16 g E N G L S H I The available picture settings are described below. OK EXIT Menu LANGUAGE POWER INDICATOR WHITE BALANCE Description To choose the language in which the control names are displayed. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. If the output of the video card is different the required specifications, deteriorate due to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. the color level may to video signal distortion. Using this function, the signal level is adjusted ORIGINAL RATIO WIDE SUPER ENEYGY SAVING Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio (16:9). Sets the SUPER ENERGY SAVING function. ON OFF RESET Resets the values of total energy consumption reduction and CO2 emission reduction Enables SUPER ENERGY SAVING you can save energy with this energy-efficient Disables SUPER ENERGY SAVING. function. estimates. FACTORY RESET Restore all factory default settings except "LANGUAGE."
immediately. Press the , buttons to reset NOTE TOTAL POWER REDUCTION: How much power is saved while using the monitor. TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. SAVING DATA(W/h) SUPER SAVING LED SAVING 545 mm (22 inch) 4 W/h 15 W/h 584 mm (23 inch) 5 W/h 12 W/h Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using broadcast video signal. LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function. E N G L S H I 18 CUSTOMIZING SETTINGS MODE Setting 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MODE button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. MODE T sRGB USER MOVIE TEXT PHOTO sRGB EXIT Description The available picture settings are described below. Menu USER MOVIE TEXT PHOTO sRGB It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu. It is a mode that the screen is adjusted to the best to view the videos. It is a mode that the screen is adjusted to the best for the text works. It is a mode that the screen is adjusted to the best to view pictures. It is a mode that the screen is adjusted to the standard sRGB. CUSTOMIZING SETTINGS 19 DUAL PACKAGE Setting
* Before using below functions, please install DUAL PACKAGE programme.
* Only for D-SUB/DVI-D input. 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the DUAL button to display the options in the OSD menu. DUAL PACKAGE DUAL MONITOR 1 2 DUALWEB E N G L S H I 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. 1 2 OFF EXTENDED CLONE OK EXIT The available picture settings are described below. Menu DUAL MONTOR DUAL WEB OFF EXTENDED CLONE ON OFF Description If select OFF,DUALMONITOR off By selecting EXETNDED,user can use secondary monitor as extended mode of primary monitor. By selecting CLONE,user can use secondary monitor as done mode of primary monitor. Make the eye comfortable by reducing the background brightness in the web page. If select OFF,CINEMA MODE is off. NOTE When monitor goes to Power Saving Mode, on pressing any buttons user can bring back monitor to normal mode 20 TROUBLESHOOTING E N G L S H I TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected?
outlet. Check and see if the power cord is connected properly to the power Is the power indicator light on?
Is the power on and the power indicator blue or green?
Is the power indicator flickering?
Do you see an "OUT OF RANGE"
message on the screen?
Do you see a "CHECK SIGNAL CABLE" message on the screen?
Press the Power button. Adjust the brightness and the contrast. If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC. This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display again. This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen?
Do you see OSD LOCKED when you push MENU button?
You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message OSD UNLOCKED will appear. Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. Press the AUTO button to automatically adjust your display image to the ideal setting. Press the AUTO button to automatically adjust your display image to the ideal setting. Press the AUTO button to automatically adjust your display image to the ideal setting. Check Control Panel Display Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). TROUBLESHOOTING 21 E N G L S H I CAUTION Check Control Panel Display Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Display image is incorrect The screen color is mono or abnormal. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel Settings. The screen blinks. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. Make sure to check if the video card supports Plug&Play function. 22 SPECIFICATIONS SPECIFICATIONS IPS225V Display Screen Type E N G L S H I Sync Input Video Input Resolution Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max 54.5 cm (22 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 54.5 cm 0.247 mm x 0.247 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Separate Sync. Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector RGB Analog (0.7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug & Play Power Consumption Power Input Dimensions
(Width x Height x Depth) Weight Tilt Range Environmental conditions Stand Base Power cord Recommend DDC 2B(Analog,Digital) On Mode : 31 W(Typ.) Sleep Mode 0.3W Off Mode 0.3 W AC 100-240 V~ 50 / 60 Hz 1.2A With Stand Without Stand 3.28 kg
-5 to 15 Operating Temperature Operating Humidity Storage Temperature Storage Humidity Attached ( ), Detached (O) Wall-outlet type 51.3 cm x 39.8 cm x 19.1 cm 51.3 cm x 31.2 cm x 5.9 cm 10C to 35 C 20 % to 80 %
-10C to 60 C 5 % to 90 % non-Condensing Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS IPS235V Display Screen Type Sync Input Video Input Resolution Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max SPECIFICATIONS 23 E N G L S H I 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm 0.265 mm x 0.265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Separate Sync. Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector RGB Analog (0.7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug & Play Power Consumption Power Input Dimensions
(Width x Height x Depth) Weight Tilt Range Environmental conditions Stand Base Power cord Recommend DDC 2B(Analog,Digital) On Mode : 35W(Typ.) Sleep Mode 0.3 W Off Mode 0.3 W AC 100-240 V~ 50 / 60 Hz 1.2A With Stand Without Stand 3.57 kg
-5 to 15 Operating Temperature Operating Humidity Storage Temperature Storage Humidity Attached ( ), Detached (O) Wall-outlet type 54.7 cm x 41.7 cm x 19.1 cm 54.7 cm x 33.1 cm x 5.9 cm 10C to 35 C 20 % to 80 %
-10C to 60 C 5 % to 90 % non-Condensing Product specifications shown above may be changed without prior notice due to upgrade of product functions. 24 SPECIFICATIONS E N G L S H I Preset Modes (Resolution) Display Modes (Resolution) Horizontal 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 Frequency(kHz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 65.290 67.500 Vertical Frequency(Hz) 70 60 75 60 75 60 75 75 60 75 60 60 Polarity(H/V)
Recommend Mode HDMI TIMING Display Modes (Resolution) Horizontal 480P 576P 720P 720P 1080i 1080i 1080P 1080P Frequency(kHz) 31.50 31.25 37.50 45.00 28.12 33.75 56.25 67.50 Vertical Frequency(Hz) 60 50 50 60 50 60 50 60 Recommend Mode Indicator Mode On Mode Sleep Mode Off Mode LED Color Blue Blinking Blue Off Make sure to read the Safety Precautions before using the product. Keep the Owners Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.