E N G L I S H www.lg.com OWNERS MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LCD MONITOR MODEL IPS225P IPS235P Important Precautions NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE This epuipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. A3 20 TROUBLESHOOTING 22 SPECIFICATIONS 22 23 24 24 IPS225P IPS235P Preset Modes (Resolution) Indicator E N E G N L G I S H 2 TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPARING Unpacking Parts and buttons Setting up the Monitor set
- Attaching the Stand Base
- Detaching the Stand Base
- Mounting on a table
- Mounting on a wall 3 4 6 6 6 7 8 10 USING THE MONITOR SET 10 10 10 10 Connecting to a PC
- D-SUB connection
- DVI-D connection
- HDMI connection 12 CUSTOMIZING SETTINGS 12 13 13 14 15 16 16 17 18 MODE Setting 19 Accessing The Main Menus Customizing Settings
- Menu Settings
-PICTURE
-COLOR
-DISPLAY
-VOLUME
-OTHERS DUAL PACKAGE Setting ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. E N E G N L G I S H CD(Owner's Manual) /
Card Power Cord D-SUB Cable
(This signal cable may be attached to this product before shipping out.) DVI-D Cable
(This cable is not included in all countries.) Stand Base Display Quality Assurance Report CAUTION
Do not use any unapproved accessories to ensure the safety and product life span.
Any damages or injuries by using unapproved accessories are not covered by the warranty. NOTE
The accessories supplied with your product may vary depending on the model.
Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions. User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores
(core in the connector) to maintain standard compliance for the product 4 ASSEMBLING AND PREPARING Parts and buttons E N E G N L G I S H Power Indicator Lighting On: Turned on
Lighting Off: Turned off
(Power Button) Button (See p.13) Connection panel (See p.10) ASSEMBLING AND PREPARING 5 Button MENU MODE DUAL AUTO INPUT EXIT
(Power Button) E N E G N L G I S H Description Accesses the main menus.(See p.13) OSD LOCKED/
UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. Use this button to enter USER, MOVIE,TEXT,PHOTO,sRGB menus.(See p.18) Use this button to enter DUAL MONITOR and DUAL WEB menus.(See p.19) When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 You can choose the input signal. When two input signals are connected, you can select the input signal (D-SUB/DVI/
HDMI) you want.
When only one signal is connected, it is automatically detected. The default setting is D-SUB. Exit the OSD(On Screen Display). Turns the power on or off. Power Indicator The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks blue. 6 ASSEMBLING AND PREPARING Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. E N E G N L G I S H CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Attach the Stand Base and then tighten the screw to the right with a Coin. Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 Turn the screw to the left, and then pull out the Stand Base from the Stand Body. Stand Base Stand Base 1 CAUTION y This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. y Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. ASSEMBLING AND PREPARING 7 Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. NOTE Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. 5 -
51 E N E G N L G I S H 10 cm 10 cm 10 cm 10 cm Front Rear Swivel Range : -
45(+/- 2) 2 Connect the Power Cord to a wall outlet. 45(+/- 2) Height Range : maximum 5.12 inches (130.0 mm) 130.0 mm 3 Press
(Power) button on the front switch panel to turn the power on. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
* Please be sure to remove the Locking pin to adjust the height. 8 ASSEMBLING AND PREPARING Using the Kensington security system WARNING E N E G N L G I S H The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and a table. When adjusting the angle of the screen, do not put your finger(s) in between the head of the m-
onitor and the stand body. You can hurt your finger(s). When adjusting the height of the screen, do not put your finger(s) in between the head of the mo-
nitor and the stand base. You can hurt your finger(s). WARNING You do not need to replace the Locking pin after it is removed, to adjust its height. ERGONOMIC It is recommended that in order to maintain an erg-
onomic and comfortable viewing position, the forw-
ard tilt angle of the monitor should not exceed 5 degrees. NOTE The Kensington security system is optional. You can obtain it from most electronics stores. ASSEMBLING AND PREPARING 9 Using the Pivot function
-The pivot function allows you to rotate the screen 90 degrees clockwise. 1. Lift the monitor to its highest height to utilize the Pivot function. 2. Landscape & Portrait : You can rotate the panel 90o clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. E N E G N L G I S H Head section
....... Stand section
..... 3. Be careful with the cables when rotating the screen. 10 ASSEMBLING AND PREPARING E N E G N L G I S H Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Model VESA (A x B) Standard screw Number of screws IPS225P/IPS235P 100 x 100 M4 4 10 cm 10 cm 10 cm 10 cm When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. Please use VESA standard as below. y 784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
*Screw:4.0mmxPitch0.7mmx Length 10 mm y 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad and screws. CAUTION y Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. y If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. y Use only an authorized LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. y Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE y Use the screws that are listed on the VESA standard screw specifications. y The wall mount kit will include an installation manual and necessary parts. y The wall mount bracket is optional. You can obtain additional accessories from your local dealer. y The length of screws may differ depending on the wall mount. Be sure to use the proper length. y For more information, refer to the instructions supplied with the wall mount. USING THE MONITOR SET 11 USING THE MONITOR SET DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations. E N E G N L G I S H Connecting to a PC y Your Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. NOTE y When using a D-Sub signal input cable connector for Macintosh y Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. NOTE y If you use HDMI PC, it can cause compatibility problem. 12 USING THE MONITOR SET E N E G N L G I S H CAUTION y Connect the signal input cable and tighten it by turning the screws clockwise. y Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. y Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. Self Image Setting Function Press the power button on the front panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) E N G L I S H NOTE NOTE y When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/
DVI-D/HDMI) respectively in Monitor set. y If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. y Some red, green, or blue spots may appear on the screen. This is normal. y "Self Image Setting" Function. This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) y AUTO Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.
(Only supported in Analog Mode) CUSTOMIZING SETTINGS 13 CUSTOMIZING SETTINGS Accessing The Main Menus 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow (
) button. 4 Select EXIT to leave the OSD menu. E N E G N L G I S H MENU (See p.14) Sets the screen options. DUAL (See p.20) Sets the screen. EXIT Exits the OSD menu. Monitor set Buttons MODE (See p.19) Sets the mode. AUTO (See p.12) Optimizes the resolution. INPUT Sets the external input. NOTE Different menu items are enabled depending on the type of input signal. y D-SUB / DVI Mode: MENU, MODE, DUAL, AUTO, INPUT, EXIT y HDMI Mode: MENU, MODE, INPUT, EXIT E N E G N L G I S H 14 CUSTOMIZING SETTINGS Customizing Settings Menu Settings 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available program settings are described below. Menu Sub-menu Analog Digital HDMI Description PICTURE BRIGHTNESS COLOR CONTRAST SHARPNESS BLACK LEVEL COLOR TEMP
(PRESET/USER) GAMMA COLOR RESET DISPLAY HORIZONTAL VERTICAL CLOCK PHASE OVERSCAN VOLUME OTHERS LANGUAGE POWER INDICATOR WHITE BALANCE ORIGINAL RATIO SUPER ENERGY SAVING FACTORY RESET To adjust the brightness, contrast and sharpness of the screen To set offset level To customize the color of the screen To adjust the position of the screen To improve the clarity and stability of the screen To adjust the volume To customize the screen status for a user's operating environment y Analog: D-SUB(Analog signal) input. y Digital: DVI-D(Digital signal) input. y HDMI: HDMI(Digital signal) input. CUSTOMIZING SETTINGS 15 E N E G N L G I S H PICTURE 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select PICTURE by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. Menu BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL Description To adjust the brightness of the screen. To adjust the contrast of the screen. To adjust the clearness of the screen. You can set the offset level. If you select'HIGH', the screen will be bright and if you select LOW, the screen will be dark. (only for HDMI input)
* Offset?As the criteria for video signal, it is the darkest screen the monitor can show. 16 CUSTOMIZING SETTINGS COLOR E N E G N L G I S H 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select COLOR by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. Menu COLOR TEMP Description PRESET Select the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (More blue). USER SIX COLOR:
Sets and stores the hue and saturation for six colors(RED/ GREEN/BLUE/
CYAN/MAGENTA/YELLOW) to satisfy the color requirements of a user. HUE SATURATION Adjusts the color sharpness on the screen. Lower values make Adjusts the screen hue. the color sharpness weaker and colors lighter while higher values make the color sharpness stronger and colors dark. Set your own red color levels. Set your own green color levels. Set your own blue color levels. RED:
GREEN:
BLUE:
Set your own gamma value. : 1.8/2.0/2.2/2.4/2.6 On the monitor, high gamma values display whitish images and low gamma values display blackish images. Resets the color settings to the factory default settings for the current input device. GAMMA COLOR RESET CUSTOMIZING SETTINGS 17 E N E G N L G I S H DISPLAY 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select DISPLAY by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. To move image left and right. To move image up and down. Description To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To select the range of output image for DTV timing in HDMI input.(only for HDMI input)Recommend overscan function to turn on when connect AV equipment. Menu HORIZONTAL VERTICAL CLOCK PHASE OVERSCAN VOLUME 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select VOLUME by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. Menu VOLUME To adjust the volume of headphone/Earphone.(Only for HDMI input) Description 18 CUSTOMIZING SETTINGS OTHERS E N E G N L G I S H 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select OTHERS by pressing the buttons on the front of the Monitor set and set the options. RTC 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. Menu LANGUAGE POWER INDICATOR WHITE BALANCE Description To choose the language in which the control names are displayed. Use this function to set the power indicator on the front side of the monitor to ON or OFF.If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. If the output of the video card is different the required specifications,the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.Activate this function when white and black colors are present in the screen. ORIGINAL RATIO WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio (16:9). Sets the SUPER ENERGY SAVING function. ON OFF RESET Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function Disables SUPER ENERGY SAVING. Resets the values of total energy consumption reduction and CO2 emission reduction estimates. If you set ON,you enable the Response Time Control function If you set OFF,you disenable the Response Time Control function. Restore all factory default settings except"LANGUAGE." Press the , buttons to reset immediately. SUPER ENERGY SAVING RTC FACTORY RESET NOTE y TOTAL POWER REDUCTION: How much power is saved while using the monitor. y TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. y SAVING DATA(W/h) SUPER SAVING LED SAVING 545 mm (21.5 inch) 584 mm (23 inch) 4 W/h 15 W/h 5 W/h 12 W/h y Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. y LG calculated these values by using broadcast video signal. y LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. y SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function. CUSTOMIZING SETTINGS 19 MODE Setting 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MODE button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. E N E G N L G I S H The available picture settings are described below. Menu USER MOVIE TEXT PHOTO sRGB Description It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu. It is a mode that the screen is adjusted to the best to view the videos. It is a mode that the screen is adjusted to the best for the text works. It is a mode that the screen is adjusted to the best to view pictures. It is a mode that the screen is adjusted to the standard sRGB. 20 CUSTOMIZING SETTINGS DUAL PACKAGE Setting
* Before using below functions, please install DUAL PACKAGE programme.
* Only for D-SUB/DVI-D input. E N E G N L G I S H 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the DUAL button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (
) button. The available picture settings are described below. Menu DUAL MONITOR DUAL WEB Description OFF EXTENDED CLONE ON OFF If select OFF,DUALMONITOR off By selecting EXTENDED,user can use secondary monitor as extended mode of primary monitor. By selecting CLONE,user can use secondary monitor as done mode of primary monitor. Help user to browse web efficiently by dividing in half. Help to arrange and move windowson screen. Help user to control dividedwindows ratio. If select OFF,DUAL WEB is off. NOTE y When monitor goes to Power Saving Mode with PC power saving option, on pressing any button and selecting Dual option user can bring back monitor to normal mode. TROUBLESHOOTING 21 E N E G N L G I S H TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected?
outlet. y Check and see if the power cord is connected properly to the power Is the power indicator light on?
Is the power on and the power indicator blue or green?
Is the power indicator flickering?
Do you see an "OUT OF RANGE"
message on the screen?
Do you see a "CHECK SIGNAL CABLE" message on the screen?
y Press the Power button. y Adjust the brightness and the contrast. y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. y Try to turn on the PC. y This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display again. y This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen?
Do you see OSD LOCKED when you push MENU button?
y You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message OSD UNLOCKED will appear. Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Check Control Panel Display Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). 22 TROUBLESHOOTING E N E G N L G I S H CAUTION y Check Control Panel Display Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. y If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. y The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Display image is incorrect The screen color is mono or abnormal. y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (true color) at Control Panel Settings. The screen blinks. y Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
y Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function. SPECIFICATIONS 23 E N E G N L G I S H SPECIFICATIONS IPS225P Display Screen Type Sync Input Video Input Resolution Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max 54.5 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coating Visible diagonal size: 54.5 cm 0.247 mm x 0.247 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Separate Sync. Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector RGB Analog (0.7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug & Play Power Consumption Power Input Dimensions
(Width x Height x Depth) Weight Tilt Range Environmental conditions Stand Base Power cord Recommend DDC 2B(Analog,Digital,HDMI) On Mode : 31 W(Typ.) Sleep Mode 0.3 W Off Mode 0.3 W AC 100-240 V~ 50 / 60 Hz 1.0A With Stand Without Stand 5.45 kg
-5 to 15 Operating Temperature Operating Humidity Storage Temperature Storage Humidity Attached ( ), Detached (O) Wall-outlet type 51.3 cm x 51.6 cm x 22.2 cm (Max) 51.3 cm x 38.6 cm x 22.2 cm (Min ) 51.3 cm x 31.2 cm x 5.9 cm 10C to 35 C 10 % to 80 %
-20C to 60 C 5 % to 90 % non-Condensing Product specifications shown above may be changed without prior notice due to upgrade of product functions. 24 SPECIFICATIONS SPECIFICATIONS IPS235P Display Screen Type E N E G N L G I S H 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm 0.265 mm x 0.265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Separate Sync. Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector RGB Analog (0.7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Sync Input Video Input Resolution Plug & Play Power Consumption Power Input Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend DDC 2B(Analog,Digital,HDMI) On Mode : 35 W(Typ.) Sleep Mode 0.3 W Off Mode 0.3 W AC 100-240 V~ 50 / 60 Hz 1.0 A Dimensions
(Width x Height x Depth) With Stand Without Stand 54.7 cm x 51.6 cm x 22.2 cm (Max) 54.7 cm x 38.6 cm x 22.2 cm (Min ) 54.7 cm x 33.1 cm x 5.9 cm Weight 5.75 kg Tilt Range Environmental conditions Stand Base Power cord
-5 to 15 Operating Temperature Operating Humidity Storage Temperature Storage Humidity Attached ( ), Detached (O) Wall-outlet type 10C to 35 C 10 % to 80 %
-20C to 60 C 5 % to 90 % non-Condensing Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS 25 E N E G N L G I S H Recommend Mode Recommend Mode Preset Modes (Resolution) Display Modes (Resolution) Horizontal 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 Frequency(kHz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 65.290 67.500 Vertical Frequency(Hz) 70 60 75 60 75 60 75 75 60 75 60 60 Polarity(H/V)
HDMI TIMING Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) 60 50 50 60 50 60 50 60 480P 576P 720P 720P 1080i 1080i 1080P 1080P Indicator Mode On Mode Sleep Mode Off Mode 31.50 31.25 37.50 45.00 28.12 33.75 56.25 67.50 LED Color Blue Blinking Blue Off Make sure to read the Safety Precautions before using the product. Keep the Owners Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.