FCC ID: BEJ32LC4D LCD TV/Monitor

 

LCD TV OWNERS MANUAL LCD TV MODELS 26LC7D 32LC4D 42LC4D Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. www.lgusa.com / www.lg.ca ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. With HDMI CEC support of LGs audio/video device connected to the HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. It has 2 HDMI ports that connect audio and video devices with one cable and produces the highest quality digital images and sound. WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera-

ture accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE TO CABLE/TV INSTALLER CAUTION This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product 1 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled Important Safety Instructions. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturers option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 Do not use this apparatus near water. Clean only with dry cloth. 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers)that produce heat. 5 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Unplug this apparatus when unused for long periods of time. 2 9 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Never touch this apparatus or antenna during a thunder or lighting storm. 14 10 11 12 13 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION concerning the Power Cord :

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates dam-

age or deterioration, unplug it, discontinue use O of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. r l a a e u n n w M Outdoor use marking :

WARNING - To reduce the risk of fire or elec-

tric shock, do not expose this appliance to rain or moisture. 15 Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus. 16 GGRROOUUNNDDIINNGG Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker 17 DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The plug must remain readily operable. 3 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 44 Preset Picture Settings

- Picture Mode - Preset . 45

- Color Tone - Preset . 46 Manual Picture Adjustment

- Picture Mode - User Mode . 47

- Color Tone - User Mode . 48 XD - Picture Improvement Technology . 49 Advanced - Cinema 3:2 Pulldown Mode . 50 Advanced - Black (Darkness) Level . 51 Picture Reset . 52 SOUND & LANGUAGE CONTROL Auto Volume Leveller (Auto Volume) . 53 Preset Sound Setting (Sound Mode) . 54 Sound Setting Adjustment - User Mode . 55 Balance . 56 TV Speakers On/Off Setup . 57 Stereo/SAP Broadcasts Setup . 58 Audio Language . 59 On-Screen Menus Language Selection . 60 Caption Mode . 61

- Analog Broadcasting System Captions . 62

- Digital Broadcasting System Captions . 63

- Caption Option . 64 CONTENTS WARNING / CAUTION . 1 SAFETY INSTRUCTIONS . 2 FEATURE OF THIS TV . 6 PREPARATION Accessories . 7 Front Panel Information . 8 Back Panel Information . 10 Stand Installation . 12 VESA Wall Mounting . 13 Desktop Pedestal Installation . 13 Back Cover for Wire Arrangement . 14 Attaching the TV to a wall . 15 Antenna or Cable Connection . 16 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 17 DVD Setup . 20 VCR Setup . 22 Other A/V Source Setup . 24 PC Setup . 25 Audio Output . 30 Digital Audio Output . 31 WATCHING TV / CHANNEL CONTROL Remote Control Key Functions . 32 Turning On TV . 34 Channel Selection . 34 Volume Adjustment . 34 On-Screen Menus Selection . 35 Channel Setup

- Auto Scan (Auto Tuning) . 36

- Add / Delete Channel (Manual Tuning) . 37

- Channel Editing . 38 Input List . 39 SimpLink . 40 Input Label . 42 Key Lock . 43 4 TIME SETTING Clock Setting

- Auto Clock Setup . 65

- Manual Clock Setup . 66 Auto On/Off Timer Setting . 67 Sleep Timer Setting . 68 Auto Shut-off Setting . 69 PARENTAL CONTROL / RATINGS Set Password & Lock System . 70 Channel Blocking . 72 External Input Blocking . 72 Movie & TV Rating . 73 APPENDIX Troubleshooting . 76 Maintenance . 78 Product Specifications . 79 Programming the Remote Control . 80 IR Codes . 83 External Control Through RS-232C . 85 5 FEATURE OF THIS TV LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. With HDMI CEC support of LGs audio/video device connected to the HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. It has 2 HDMI ports that connect audio and video devices with one cable and produces the highest quality digital images and sound. If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is noth-

ing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. 6 PREPARATION ACCESSORIES Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. The accssories can be different from the figures shown here. Owner's Manual 7 5 3 8 6 0 9 BACK IN P U T R ATIO P O W E R M O D E T V C O M P1 PICTURE D V D V C R H D MI1 SOUND RGB-PC ADJUST SIMPLINK

C C E XIT M E N U S A P ENTER TIM E R FAV C H C C E XIT V O L M U TE 1 4 2 IN P T V U T IN P U T R ATIO P O W E R M O D E T V C O M P1 PICTURE D V D V C R H D MI1 SOUND RGB-PC ADJUST SIMPLINK

M E N U S A P ENTER TIM E R FAV C H V O L M U TE 1 4 2 LCD TV PLASMA TV Owner's Manual http://www.lgusa.com www.lg.ca Copyright 2007 LGE, All Rights Reserved. 7 5 3 8 6 0 9 BACK 1.5V 1.5V Owners Manual CD Manual Remote Control, Batteries Power Cord 2- TV Bracket Bolts

(Refer to p.15) 2- TV Brackets, 2- Wall Brackets

(Refer to p.15) Cable Management Twist Holder Arrange the wires with the twist holder. OOppttiioonn EExxttrraass 75ohm Round Cable D-sub 15 pin Cable FFoorr 2266//3322 iinncchheess FFoorr 2266//4422 iinncchheess 4-Bolts for stand assembly

(Refer to p.12) Polishing Cloth

* Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior.

* Do not wipe roughly when removing stain. Please be cautions of that excessive pressure may cause scratch or discoloration. P R E P A R A T O N I 7 PREPARATION FRONT PANEL INFORMATION I Here shown may be somewhat different from your TV. I NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Front Panel Controls (26 inches) CHCH VOLOL ENTER ENTER MENUMENU INPUT INPUT CHANNEL (DD,EE)Buttons VOLUME (FF,GG)Buttons ENTER Button MENU Button INPUT Button POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks green and then illuminates green before the picture is displayed. P R E P A R A T O N I 8 Front Panel Controls (32/42 inches) CHCH VOLOL ENTER ENTER MENUMENU INPUT INPUT R CHANNEL (DD,EE)Buttons VOLUME (FF,GG)Buttons ENTER Button MENU Button INPUT Button POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks green and then illuminates green before the picture is displayed. P R E P A R A T O N I 9 PREPARATION BACK PANEL INFORMATION I Here shown may be somewhat different from your TV. Back Connection Panel 11 1 3 RGB IN 5 4 S-VIDEO R 12 R I O D U A O N O M L

O E D V I AV IN 2 ANTENNA/

CABLE IN 6 DIGITAL AUDIO OUT OPTICAL 7 HDMI/DVI IN RGB(PC) AUDIO

(RGB/DVI) SERVICE REMOTE CONTROL IN 2 1(DVI) 2 1 COMPONENT IN RS-232C IN

(CONTROL & SERVICE) AUDIO OUT

( ) AUDIO S-VIDEO VIDEO

) AUDIO

MONO V A VIDEO 2 1 N I 8 9 10 P R E P A R A T O N I 10 1 2 3 4 5 6 HDMI/DVI IN 1 (DVI), 2 Connect a HDMI (DVI) connection to either input. COMPONENT IN Connect a component video/audio device to these jacks. RGB (PC) Connect the output from a PC. AUDIO (RGB/DVI) Connect the audio from a PC or DTV. SERVICE Remote Control Port Connect a wired remote control. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. 7 8 9 10 DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. RS-232C IN (CONTROL & SERVICE) PORT For external control devices. AUDIO OUT Connect analog audio to various types of equipment. AV (Audio/Video) IN 1/2 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. 11 Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. P R E P A R A T O N I 11 PREPARATION STAND INSTALLATION (Only 26/32 inches LCD TV models) I Here shown may be somewhat different from your TV. 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Securely install the 4 bolts provided. P R E P A R A T O N I 12 VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. 26/32 inches 200 mm 42 inches 600 mm R 100 mm R 400 mm

NOTE GG Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.

( ) DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION Ensure adequate ventilation by following the clearance recommendations. P R E P A R A T O N I 13 PREPARATION BACK COVER FOR WIRE ARRANGEMENT I Here shown may be somewhat different from your TV. 1 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT as shown. CABLE MANAGEMENT TWIST HOLDER 3 Bundle the cables using the supplied TWIST HOLDER. NOTE

GG Do not hold the CABLE MANAGEMENT when moving the product.

- If the product is dropped, you may be injured or the product may be broken. How to remove the CABLE MANAGEMENT GG Hold the CABLE MANAGEMENT with both hands and pull it backward. P R E P A R A T O N I 14 ATTACHING THE TV TO A WALL We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. I Insert the TV brackets and bolts to tighten the product to the wall as shown in the picture.

* Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. I Use a sturdy rope (not provided as parts of the product, must pur-

chase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. P R E P A R A T O N I 15 PREPARATION ANTENNA OR CABLE CONNECTION I Here shown may be somewhat different from your TV. R 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. P R E P A R A T O N I Multi-family Dwellings/Apartments

(Connect to wall antenna socket) R ANTENNA/

CABLE IN RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna) Copper Wire Wall Antenna Socket Outdoor Antenna

(VHF, UHF) 2. Cable Cable TV Wall Jack Be careful not to bend the bronze wire when connecting the antenna.

( ) R ANTENNA/

CABLE IN R

( ) Diplexer

(Signal Combiner) ANTENNA/

CABLE IN ANTENNA/

CABLE IN

( ) RF Coaxial Wire (75 ohm) 3. Using both cable and antenna Antenna Cable TV Wall Jack Antenna RF Coaxial Wire (75 ohm) RF Coaxial Wire (75 ohm) UHF VHF Signal Amplifier I To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. I If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance. 16

NOTE GG The TV will let you know when the analog, cable, and digital channel scans are complete.

( ) EXTERNAL EQUIPMENT SETUP I To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. I This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting Component cable 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11 jacks on the set. Match the jack colors

(Y = green, PB = blue, and PR = red). 2 Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11 jacks on the set. 2. How to use I Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box. operation) I Select CCoommppoonneenntt 11 input source by using the IINNPPUUTT button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN22 input, select CCoommppoonneenntt 22 input source. Signal 480i 480p 720p 1080i 1080p Component 1/2 HDMI1/DVI, HDMI2 Yes Yes Yes Yes Yes No Yes Yes Yes Yes E X T E R N A L E Q U I P M E N T S E T U P RGB IN

/DVI IN RGB(PC) AUDIO

(RGB/DVI) SERVICE REM CONT COMPONENT IN RS

(CONTR 2 1 VIDEO AUDIO S-V

( ) 1 2 Y PB PR L R 17 HDMI/DVI IN RGB(PC) AUDIO

(RGB/D RGB IN COMPONENT IN 2 1 (DVI) 2 1 VIDEO 1 HDMI-DTV OUTPUT When connecting HDMI cable 1. How to connect 1 2 Connect the digital set-top box to HHDDMMII//DDVVII IINN 11

((DDVVII)) or 22 jack on the set. No separated audio connection is necessary. HDMI supports both audio and video.

( ) 2. How to use I Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box.) I Select HHDDMMII11 or HHDDMMII22 input source by using the IINNPPUUTT button on the remote control.

NOTE GG When connected, the TV will tell a connected device what resolution it supports and the resolution it prefers. If the device supports this Auto HDMI function, the player output resolution will be automatically set to 720p. GG If the device does not support Auto HDMI, you need to set the output resolution appropriately.

( ) E X T E R N A L E Q U I P M E N T S E T U P 18 When connecting HDMI to DVI cable ANTENNA/

CABLE IN HDMI/DVI IN RGB(PC) AUDIO

(RGB/DVI) SERVICE REMOTE CONTROL IN RGB IN DIGITAL AUDIO OUT OPTICAL 2 1 (DVI) 2 1 COMPONENT IN RS-232C IN

(CONTROL & SERVICE) AUDIO OUT VIDEO AUDIO S-VIDEO

) AUDIO

VIDEO MONO 1 N I V A 1 2 DVI-DTV OUTPUT L R 1. How to connect 1 2 Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN 11 ((DDVVII)) jack on the set. Connect the audio output of the digital set-top box to the AAUUDDIIOO ((RRGGBB//DDVVII)) jack on the set. 2. How to use I Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) I Select HHDDMMII11 input source by using the IINNPPUUTT button on the remote control. E X T E R N A L E Q U I P M E N T S E T U P 19 EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the DVD to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO11 jacks on the set. Match the jack colors

(Y = green, PB = blue, and PR = red). 2 Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO11 jacks on the set. 2. How to use I Turn on the DVD player, insert a DVD. RGB IN VI IN RGB(PC) AUDIO

(RGB/DVI) SERVICE REM CONT COMPONENT IN RS

(CONTR 2 1 VIDEO AUDIO S-VI

( ) I Select CCoommppoonneenntt 11 input source by using the IINNPPUUTT button on the remote control. 1 2 I If connected to CCOOMMPPOONNEENNTT IINN 22 input, select CCoommppoonneenntt 22 input source. I Refer to the DVD player's manual for operating instructions. Y PB PR L R Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr E X T E R N A L E Q U I P M E N T S E T U P 20 When connecting with an S-Video cable 1. How to connect 1 2 Connect the S-VIDEO output of the DVD to the SS --VVIIDDEEOO input on the set. Connect the audio outputs of the DVD to the AAUUDDIIOO input jacks on the set. 2. How to use I Turn on the DVD player, insert a DVD. I Select AA VV 11 input source by using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN22, select AA VV 22 input source. I Refer to the DVD player's manual for operating instructions. When connecting HDMI cable 1. How to connect 1 2 Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN 11 ((DDVVII)) or 22 jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. 2. How to use

( ) I Select HHDDMMII11 or HHDDMMII22 input source by using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. NOTE

GG When connected, the TV will tell a connected device what resolution it supports and the resolution it prefers. If the device supports this Auto HDMI function, the player out-

put resolution will be automatically set to 720p. GG If the device does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the DVD to 720p. S-VIDEO AUDIO L R ANTENNA/

CABLE IN 1 IO DVI) SERVICE REMOTE CONTROL IN 2 DIGITAL AUDIO OUT OPTICAL N RS-232C IN

(CONTROL & SERVICE) AUDIO OUT AUDIO S-VIDEO VIDEO

) AUDIO

MONO 1 N I V A HDMI/DVI IN RGB(PC) AUDIO

(RGB/DVI RGB IN 2 1 (DVI) 2 1 COMPONENT IN VIDEO A 1 HDMI-DVD OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 21 EXTERNAL EQUIPMENT SETUP VCR SETUP I To avoid picture noise (interference), leave an adequate distance between the VCR and TV. I Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long peri-

od of time (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in conse-

quence the manufactures warranty does not cover the product bearing this phenomenon.

( ) When connecting with an antenna ANTENNA/

CABLE IN 1 GB IN AUDIO

(RGB/DVI) SERVICE REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL MPONENT IN RS-232C IN

(CONTROL & SERVICE) AUDIO OUT ANT OUT S-VIDEO VIDEO L R ANT IN OUTPUT SWITCH 2 Wall Jack E X T E R N A L E Q U I P M E N T S E T U P 1 N I EO AUDIO S-VIDEO

) AUDIO

VIDEO MONO V A Antenna 1. How to connect 1 2 Connect the RF antenna out socket of the VCR to the AANNTTEENNNNAA//CCAABBLLEE IINN socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use I Set VCR output switch to 3 or 4 and then tune TV to the same channel number. I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) 22

( ) When connecting with a RCA cable ANT IN S-VIDEO VIDEO L R 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left

= white, and Audio Right = red) 2. How to use ANT OUT OUTPUT SWITCH 1 ANTENNA/

CABLE IN UDIO B/DVI) SERVICE REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) T IN RS-232C IN

(CONTROL & SERVICE) I Select AA VV 11 input source by using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN22, select AA VV 22 input source.

( ) AUDIO OUT AUDIO S-VIDEO

) AUDIO

VIDEO MONO

NOTE GG If you have a mono VCR, connect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the set. When connecting with an S-Video cable ANT IN S-VIDEO VIDEO L R 1. How to connect 1 2 Connect the S-VIDEO output of the VCR to the SS --VVIIDDEEOO input on the set. Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the set. ANT OUT OUTPUT SWITCH 1 ANTENNA/

CABLE IN 2 DIGITAL AUDIO OUT

( ) OPTICAL UDIO B/DVI) SERVICE REMOTE CONTROL IN 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR.

(Refer to the VCR owners manual.) T IN RS-232C IN

(CONTROL & SERVICE) AUDIO OUT I Select AA VV 11 input source by using the IINNPPUUTT button on the AUDIO S-VIDEO

) AUDIO

VIDEO MONO remote control. I If connected to AAVV IINN22, select AA VV 22 input source. CAUTION 1 N I V A 1 N I V A

NOTE GG The picture quality is improved: compared to normal composite (RCA cable) input. GG Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. E X T E R N A L E Q U I P M E N T S E T U P 23 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and external equipment. Match the jack colors.

(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use Camcorder Video Game Set VIDEO L R I Select AA VV 22 input source by using the IINNPPUUTT S-VIDEO button on the remote control. 1 I If connected to AAVV IINN11 input, select AA VV 11 input source. I Operate the corresponding external equipment. R I O D U A O N O M L

O E D V I AV IN 2 ex) LCD TV Model E X T E R N A L E Q U I P M E N T S E T U P 24 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15 pin cable 1. How to connect 1 2 Connect the RGB output of the PC to the RR GG BB ((PP CC)) jack on the set. Connect the PC audio output to the AAUUDDIIOO

((RRGGBB//DDVVII)) jack on the set. 2. How to use I Turn on the PC and the TV. I Select RRGGBB--PPCC input source by using the IINNPPUUTT button on the remote control. RGB IN I/DVI IN RGB(PC) AUDIO

(RGB/DVI) SERVICE CO COMPONENT IN

(CO 2 1 VIDEO AUDIO 1 2 E X T E R N A L E Q U I P M E N T S E T U P

( ) RGB OUTPUT L R

( ) 25 EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable HDMI/DVI IN RGB(PC) AUDIO

(RGB/DVI) SERVICE REMOTE CONTROL IN RGB IN DIGITAL AUDIO OUT OPTICAL CABLE IN 2 1 (DVI) 2 1 COMPONENT IN RS-232C IN

(CONTROL & SERVICE) AUDIO OUT VIDEO AUDIO S-VIDEO

) AUDIO

VIDEO MONO 1 N I V A 2 1 1. How to connect DVI-PC OUTPUT L R Connect the DVI output of the PC to the HHDDMMII//DDVVII IINN 11 ((DDVVII)) jack on the set. Connect the PC audio output to the AAUUDDIIOO ((RRGGBB//DDVVII)) jack on the set. 1 2 2. How to use I Turn on the PC and the TV. I Select HHDDMMII11 input source by using the IINNPPUUTT button on the remote control.

NOTE GG If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. GG If the PC does not support Auto DVI, you need to set the output resolution appropriately. E X T E R N A L E Q U I P M E N T S E T U P 26

NOTES GG To get the the best picture quality, adjust the PC graphics card to 1920x1080, 60Hz. the PC graphic card or consult the manufacturer of the PC graphic card. GG Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. GG The synchronization input form for Horizontal and Vertical frequencies is separate. GG Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. GG Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolu-

tion, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change Supported Display Specifications RGB-PC, HDMI1/DVI-PC mode HDMI1/DVI-DTV, HDMI2-DTV mode Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.469 720x400 640x480 800x600 1024x768 1280x768 1360x768 1366x768 31.469 31.469 37.879 48.363 47.776 47.720 47.130 70.08 70.08 59.94 60.31 60.00 59.87 59.799 59.65

* RGB-PC mode only: 640x350, 720X400 720x480 1280x720 1920x1080i 1920x1080p 31.47 31.47 44.960 45.000 33.720 33.750 26.97 27.000 33.71 33.750 67.432 67.500 59.94 60.00 59.94 60.00 59.94 60.00 23.94 24.00 29.97 30.00 59.939 60.00 E X T E R N A L E Q U I P M E N T S E T U P 27 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Overview When the RGB input of the set is connected to a PC Output, select RGB-PC with using the IINNPPUUTT button on the remote control. When you change the resolution, select the proper resolu-

tion in present input to see the best picture appearance. 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select SSccrreeeenn. Press the GG button to enter the screen adjustment menu. E X T E R N A L E Q U I P M E N T S E T U P 28 Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset Screen G 1 Selection ( G or ) leads you to the screen adjustment menu. 2 3 Auto Config. Resolution Position Size Phase Reset Auto configuration ADJUST Prev FF GG Select Ok Adjustment for screen Resolution, Position, Size, and Phase 1 2 3 Press the AADDJJUUSSTT button and then use DD or EE button to select RReessoolluuttiioonn, PPoossiittiioonn, SSiizzee, or PPhhaassee. Press the EENNTTEERR button and then use DD EE FF GG button to make appropriate adjustments. I The PPhhaassee adjustment range is --1166 ~ ++1166. I The SSiizzee adjustment range is --3300 ~ ++3300. Press the EENNTTEERR button. Auto Configuration and Initializing (Reset to original factory values) To initialize the adjusted values. 1 2 3 Press the AADDJJUUSSTT button and then use DD or EE button to select RReesseett or AAuuttoo CCoonnffiigg... Press the EENNTTEERR button and then use FF or GG button to select YY ee ss. Press the EENNTTEERR button. Auto Config. Resolution Position Size Phase Reset 1024 x 768 1280 x 768 1360 x 768 1366 x 768 ADJUST Prev DD EE Select Ok 1 2 3 AAuuttoo CCoonnffiigg.. This function is to adjust pic-

ture position and minimizes image shaking automatically. SS ii zz ee PPoossiittiioonn RReessoolluuttiioonn XGA(1024, 1280, 1360) isnt distinguished because of hav-

ing the same H/V Sync Time. This function is you to select the Default Sync Time. This function is to adjust pic-

ture to left/right and up/down as you prefer. This function is to minimize any vertical bars or stripes vis-

ible on the screen back-

ground. And the horizontal screen size will also change. This function allows you to remove any horizontal noise and clear or sharpen the image of characters. PPhhaassee Auto Config. Resolution Position Size Phase Reset Auto Config. Resolution Position Size Phase Reset Start Auto configuration Yes No ADJUST Prev FF GG Select Ok Initialize Settings Yes No ADJUST Prev FF GG Select Ok 1 2 3 E X T E R N A L E Q U I P M E N T S E T U P 29 EXTERNAL EQUIPMENT SETUP AUDIO OUTPUT The TV has a special signal output capability which allows you to hook up the second TV or monitor. 1. How to connect 1 2 Connect the second TV or monitor to the TVs AAUUDDIIOO OOUUTT jacks. See the Operating Manual of the second TV or monitor for further details regarding that devices input settings. RS-232C IN

(CONTROL & SERVICE) AUDIO OUT 1 N I V A S-VIDEO

) AUDIO

VIDEO MONO 1

NOTE GG Component1-2, RGB-PC, HDMI1/DVI, HDMI2, DTV input sources cannot be used for AUDIO out. VIDEO L R S-VIDEO E X T E R N A L E Q U I P M E N T S E T U P 30 DIGITAL AUDIO OUTPUT Send the TVs audio to external audio equipment via the Digital Audio Output (Optical) port. ANTENNA/

CABLE IN O VI) SERVICE REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL N RS-232C IN

(CONTROL & SERVICE) 1 AUDIO OUT 1 N I AUDIO S-VIDEO

) AUDIO

VIDEO MONO V A 2 1. How to connect 1 2 3 Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu.

(GG pp .. 55 77). See the external audio equipment instruction manual for operation.

NOTE GG When connecting with external audio equipments, such as ampli-

fiers or speakers, please turn the TV speakers off. (GG pp..5577) CAUTION GG Do not look into the optical output port. Looking at the laser beam may damage your vision. GG Block the SPDIF out(optical/coaxial) about the contents with ACP(Audio Copy Protection) function. E X T E R N A L E Q U I P M E N T S E T U P 31 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: TV, AV1-

2, Component 1-2, RGB-PC, HDMI1/DVI and HDMI2.

(AV 1-2, Component 1-2, RGB-PC, HDMI1/DVI, and HDMI2 input sources are linked automatically, only if a device is connected.) RATIO Change the aspect ratio. GG pp..4444 Adjusts brightness on screen. POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

CC MENU SAP EXIT TIMER Control video cassette recorders or DVD players. ENTER VCR/DVD control buttons THUMBSTICK

(Up/Down/Left

/Right/ENTER) VOLUME UP

/DOWN Navigate the on-screen menus and adjust the system settings to your preference. Increase/decrease the sound level. FAV Scroll through the programmed Favorite channels.GG pp..3388 MUTE Switch the sound on or off. GG pp..3344 CHANNEL UP/DOWN Select available channels. NUMBER button

(DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. BACK Tune to the last channel viewed. VOL FAV MUTE 1 4 7 2 5 8 0 CH 3 6 9 BACK W A T C H I N G T V

C H A N N E L C O N T R O L 32 MODE Select the remotes operating mode: TV, DVD, VCR. COMP1 Directly, select Component1 input. HDMI 1 Directly, select HDMI1/DVI input. RGB-PC Directly, select RGB-PC input. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SimpLink menu appears at the screen. GG pp..4400 PICTURE SOUND ADJUST Selects the factory preset picture depend on the viewing environment. GG pp..4455 Selects the factory preset sound for type of program. GG pp..5544 Adjust the screen resolution, position, size and phase. GG pp..2299 Not functional

EXIT Clears all on-screen displays and returns to TV viewing from any menu. CC Select a closed caption. GG pp..6611 MENU Displays the main menu. SAP Analog mode: Selects MTS sound (Mono, Stereo, or a SAP) GG pp..5588 DTV mode: Changes the audio language. TIMER Select the amount of time before your TV turns off automatically. GG pp..6688 Installing Batteries Remote control effective range I Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). I Install two 1.5V AA batteries. Dont mix old or used batteries with new ones. I Close cover. POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

CC MENU SAP EXIT TIMER ENTER FAV VOL CH R POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH I Use a remote control up to 7 meters distance and 30 degree (left/right) within the receiving unit scope. I Dispose of used batteries in a recycle bin to preserve environment. W A T C H I N G T V

C H A N N E L C O N T R O L 33 WATCHING TV / CHANNEL CONTROL TURNING ON TV 1 2 First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the

, IINNPPUUTT, CCHH ((DD or EE)) button on the TV or press the PPOOWWEERR, IINNPPUUTT, TTVV IINNPPUUTT, CCHH ((+ or -))

, NNuummbbeerr ((00~99)) button on the remote control. Select the viewing source by using the TTVV IINNPPUUTT, IINNPPUUTT button on the remote control. I This TV is programmed to remember which power state it was last set to, even if the power cord is out. 3 When finished using the TV, press the PPOOWWEERR button on the remote control. The TV reverts to standby mode. INPUT TV INPUT POWER MODE TV DVD VOL FAV MUTE 1 4 7 2 5 8 0 CH 3 6 9 BACK

NOTE GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet. CHANNEL SELECTION 1 Press the CCHH ((+ or -)) or NNUUMMBBEERR buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 2 3 Press the VVOOLL ((+ or -)) button to adjust the volume. If you want to switch the sound off, press the MMUUTTEE button. You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL ((+ or -)) button. VOL FAV MUTE 1 4 7 2 5 8 0 CH 3 6 9 BACK ENTER VOL FAV MUTE CH 1 2 3 W A T C H I N G T V

C H A N N E L C O N T R O L 34 ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 2 Press the MMEENNUU button and then use DD or EE button to select the each menu. Press the GG button and then use DD EE FF GG button to display the available menus. SETUP PICTURE Auto Tuning Manual Tuning Channel Edit LOCK For USA For Canada Lock System : Off Lock System : Off AUDIO Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Set Password Block Channel TV Rating-English TV Rating-French Input Block Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen Sound Mode : Standard Auto Volume

: On Balance : 0 TV Speaker : On OPTION TIME Language : English Clock : Oct 19, 2006, 03:44 AM Input Label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Off Time On Time Sleep Time Auto Sleep

: Off

: Off

: Off

: Off W A T C H I N G T V

C H A N N E L C O N T R O L 35 WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the SSEETTUUPP menu. Auto Tuning Manual Tuning Channel Edit Press the GG button and then use DD or EE button to select AAuuttoo TTuunniinngg. Press the EENNTTEERR button to begin the channel search. Allow AAuuttoo TTuunniinngg to complete the channel search cycle for AANNTTEENNNNAA and CCAABBLLEE.

NOTE Analog TV antenna Digital DTV antenna Analog CATV cable Digital CADTV cable 1 Auto Tuning G Manual Tuning Channel Edit Selection ( G or ) leads you to the Auto Tuning screen. Auto Tuning Manual Tuning Channel Edit 2 Processing Auto Tuning... Selection ( G or ) leads DTV Ch.23 you to the Auto Tuning Found Channel(s): 16 screen. Press to stop the current scan and start ANALOG ANTENNA channel scan. Next MENU Prev 3 W A T C H I N G T V

C H A N N E L C O N T R O L 36 Add/Delete Channel (Manual Tuning) A password is required to gain access to Manual Tuning menu if the Lock System is turned on. If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 1 2 3 4 5 6 Press the MMEENNUU button and then use DD or EE button to select the SSEETTUUPP menu. Auto Tuning Manual Tuning Channel Edit Press the GG button and then use DD or EE button to select MMaannuuaall TTuunniinngg. Press the GG button and then use DD or EE button to select TT VV, DD TT VV, CCAATTVV, and CCAADDTTVV. Press the GG button and then use DD or EE button to select channel you want to add or delete. Press the EENNTTEERR button to add or delete the channel. Auto Tuning Manual Tuning G Channel Edit Select channel type and RF-channel number. DTV 2 1 2 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Auto Tuning Manual Tuning Channel Edit

NOTE GG This digital channel number is a physical channel number, which is different from the normal channel number shown in Channel Edit. Select channel type and RF-channel number. DD EE DTV GG 12 DTV 12-0 Bad Normal Good Press to delete the channel. 3 4 5 W A T C H I N G T V

C H A N N E L C O N T R O L 37 WATCHING TV / CHANNEL CONTROL Channel Editing From the default channel list created from the Auto Tuning channel search, you can create two different types of chan-

nel lists in memory: custom list and favorite channel list. A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is high-

lighted you can add or delete the channel by referring to the small window at the top-left corner of the screen. You can create your own Favorite List. Use the FF AA VV button on the remote control when a channel is highlighted and then add or delete the channel to/from your Favorite List. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the SSEETTUUPP menu. Press the GG button and then use DD or EE button to select CChhaannnneell EEddiitt. Press the GG button. You will now see a screen filled with channel numbers and a preview picture. Use DD EE FF GG button to select a channel and then use the EENNTTEERR button to add or delete it. Press FFAAVV button to add the channel to the Favorite List. The surfing icon will appear in front of that channel num-

ber. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 5 W A T C H I N G T V

C H A N N E L C O N T R O L 38 CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Auto Tuning Manual Tuning Channel Edit 1 Auto Tuning Manual Tuning Channel Edit G Selection ( G or

) leads you to the channel edit screen. 2 3 4 INPUT LIST Press the IINNPPUUTT button to display external device that is connected to the unit, on screen. Press the EENNTTEERR button to change the input to the active external device. Use the DD or EE button to select the input source. AV 2 Input List Antenna Cable AV 1 AV 2 Component1 EE 1 If all external input sources are connected:

AAnntteennnnaa CCaabbllee AAVV11 AAVV22 CCoommppoonneenntt11 HHDDMMII33 HHDDMMII22 HHDDMMII11 RRGGBB--PPCC CCoommppoonneenntt22 2 If no external input sources are not connected:

AAnntteennnnaa CCaabbllee 3 If there is any external input source connected:

(ex: When connected only to AV 2) AAnntteennnnaa CCaabbllee AAVV22 AAnntteennnnaa : Select it when watching the DTV/TV. CCaabbllee: Select it when watching the CADTV/CATV. AAVV 11,, AAVV 22 : Select it when watching the VCR or external equipment. CCoommppoonneenntt 11--22 : Select it when using the DVD or the Digital set-top box depend on connector. RRGGBB--PPCC : Select it when using PC depend on connector. HHDDMMII,, HHDDMMII22,, HHDDMMII33 : Select it when using DVD, PC or Digital set-top box depend on connector. W A T C H I N G T V

C H A N N E L C O N T R O L 39 WATCHING TV / CHANNEL CONTROL This operates only for the devices with the Please check the This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. logo. logo. W A T C H I N G T V

C H A N N E L C O N T R O L 40 SimpLink Preparations 1 2 3 4 5 Connect the HDMI/DVI IN 1, 2 or 3 terminal of the TV to the rear terminal (HDMI output) of the Simplink device with the HDMI cable. After connecting the HDMI jack for the home theater with simplink function in the above method, connect the DIGITAL AUDIO OUT OPTICAL on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the simplink device with the Optical cable. Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select SSiimmppLLiinnkk. Press the GG button and then use DD or EE button to select OOnn. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Language : English Input label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input Label SimpLink Key Lock Caption Set ID G Off On 2 3 4

NOTE GG When operating the external device with SimpLink, press the TV button among the MODE button on the remote control. GG When you switch the Input source with the INPUT button on the remote control, you can stop the opera-

tion of device worked by SimpLink. GG When you select or operate the media device with home theater function, the speaker automatically switch-

es to home theater speaker (HT speaker). GG When you execute Photo List, Music List function during DVD playback included in home theater sup-

ported the SimpLink stops and the applicable function is executed after switching the input to TV. SimpLink Functions I DDiirreecctt PPllaayy:: After connecting AV devices to TV, you can directly control the devices and play media without additional settings. I SSeelleecctt AAVV ddeevviiccee:: Enables you to select one of AV devices connected to TV and play it. I DDiisscc ppllaayybbaacckk:: Control connected AV devices by pressing the

, DD EE FF GG, EENNTTEERR buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip. I PPoowweerr ooffff aallll ddeevviicceess:: When you power off TV, all connected devices are turned off. I SSwwiittcchh aauuddiioo--oouutt:: Offers an easy way to switch audio-out.

(A device, which is connected to TV through HDMI cable but does not support SimpLink, does not provide this function) 1 2 3 After selecting the TT VV button of the MODE on the remote control, press the SSIIMMPPLLIINNKK button. Use DD EE FF GG button to select the desired device and then press the EENNTTEERR button. Control connected AV devices by pressing the

, DDEEFF GG, EENNTTEERR buttons. SimpLink Menu 1 2 3 4 5 TTVV vviieewwiinngg: Switch to the previous TV channel regardless of the current mode. DDIISSCC ppllaayybbaacckk: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VVCCRR ppllaayybbaacckk: Play and control the con-

nected VCR. HHDDDD RReeccoorrddiinnggss ppllaayybbaacckk: Play and control recordings stored in HDD. AAuuddiioo OOuutt ttoo HHTT ssppeeaakkeerr//AAuuddiioo OOuutt ttoo TTVV: Select HT speaker or TV speaker for Audio Out. 1 2 3 4 5 1 2 3 GG Selected Device GG When no device is connected

(displayed in gray) GG When a device is connected

(displayed in bright color) W A T C H I N G T V

C H A N N E L C O N T R O L 41 WATCHING TV / CHANNEL CONTROL INPUT LABEL Sets a label to each input source which is not in use when you press the INPUT button. 1 2 3 4 5 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select IInnppuutt LLaabbeell. Press the GG button and then use DD or EE button to select the source: AV1, AV2, Component1, Component2, RGB-PC, HDMI1, HDMI2 or HDMI3. Press the FF or GG button to select the label. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. W A T C H I N G T V

C H A N N E L C O N T R O L 42 CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Language : English Input label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input label G SimpLink Key Lock Caption Set ID 1 AV1 AV2 Component1 Cable Box VCR DVD Component2 Set Top Box RGB-PC HDMI1 HDMI2 HDMI3 VCR Game Satellite Cable Box 2 3 4 KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select KKeeyy LLoocckk. Press the GG button and then use DD or EE button to select OOnn or OOffff. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Language : English Input label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input Label SimpLink Key Lock Caption Set ID G Off On 1 2 3 W A T C H I N G T V

C H A N N E L C O N T R O L 43 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. I RGB-PC input source use 4:3 or 16:9 aspect ratio. I DTV or HDMI input source use JJuusstt SSccaann. POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

NOTE GG If a fixed image is displayed on the screen for a long time, the image may become imprinted on the screen and remain visible. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. CC MENU SAP EXIT TIMER ENTER 1 Press the RRAATTIIOO button repeatedly to select the desired picture format. I You can also adjust AAssppeecctt RRaattiioo in the PPIICCTTUURREE menu. Set by program Selects the proper picture proportion to match the sources image.

(4:3 4:3)

(16:9 16:9) Zoom 1 Choose Zoom 1 when you want to view the pic-

ture without any alteration. However, the top and bottom portions of the picture will be cropped. Set By Program Set By Program Zoom 1 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. 4:3 Zoom 2 16:9 Adjust the picture horizontally, in a linear pro-

portion to fill the entire screen. Just Scan Following selection will lead to you view the pic-

ture of best quality without loss of original pic-

ture in high resolution image. 16:9 Just Scan P I C T U R E C O N T R O L 44 POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

CC MENU SAP EXIT TIMER ENTER PRESET PICTURE SETTINGS Picture Mode - Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. IInntteelllliiggeenntt EEyyee, DDyynnaammiicc, SSttaannddaarrdd, MM ii ll dd Settings are pre-

set for the optimum picture quality at the factory and are not adjustable. In the UUsseerr11 and UUsseerr22 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint. Press the PPIICCTTUURREE button repeatedly to select the picture appearance setup option as below :

IInntteelllliiggeenntt EEyyee (LCD TV only), DDyynnaammiicc, SSttaannddaarrdd, MMiilldd, UUsseerr11, and UUsseerr22 (your own settings). Press the EEXXIITT button to save and return to TV viewing. 1 2 I You can also use the PPIICCTTUURREE menu to adjust PPiiccttuurree MMooddee. Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen Picture Mode G Intelligent Eye Color Temperature XD Advanced Aspect Ratio Picture Reset Screen Dynamic Standard Mild User 1 User 2 P I C T U R E C O N T R O L 45 PICTURE CONTROL Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), CCoolloorr TTeemmppeerraattuurree is automatically change. When selecting Picture Mode options (User 1 and User 2), you can choose the CCoolloorr TTeemmppeerraattuurree. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DD or EE button to select either CCooooll, MMeeddiiuumm, WWaarrmm or UUsseerr. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen Picture Mode Color Temperature G XD Advanced Aspect Ratio Picture Reset Screen Cool Medium Warm User 1 2 3 P I C T U R E C O N T R O L 46 MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. 1 2 3 4 5 6 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select PPiiccttuurree MMooddee. Press the GG button and then use DD or EE button to select UUsseerr 11 or UUsseerr22. Press the GG button and then use DD or EE button to

((CCoonnttrraasstt, select BBrriigghhttnneessss, CCoolloorr, SShhaarrppnneessss, TTiinntt, or BBaacckk LLiigghhtt)). the desired picture option I BBaacckk LLiigghhtt To control the brightness of the screen, adjust the brightness of LCD panel. Press the GG button and then use FF or GG button to make appropriate adjustments. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen 1 Intelligent Eye Dynamic Standard Mild User 1 G User 2 Selection ( G or ) leads you to the detailed setting screen. 2 3 G R G Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset Screen User1 Contrast Brightness Color Sharpness Tint 85 50 50 50 0 Back Light 100 Press to confirm. MENU EE Contrast 85 EE P I C T U R E C O N T R O L 4 5 47 PICTURE CONTROL Color Tone - User Mode You can also adjust the detailed settings (Red, Green, Blue) by selecting the CCoolloorr TTeemmppeerraattuurree--UUsseerr menu. This feature operate only if the picture mode set UUsseerr 11 or UUsseerr 22. 1 2 3 4 5 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DD or EE button to select UUsseerr. Press the GG button and then use DD or EE button to select RR ee dd, GGrreeeenn, or BBlluuee. Press the GG button and then use FF or GG button to make appropriate adjustments. I The adjustment range of RR ee dd, GG rr ee ee nn, or BB ll uu ee is

-20~ +20. 6 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. P I C T U R E C O N T R O L 48 CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset Screen Cool Medium Warm User 1 G Selection ( G or ) leads you to the detailed setting screen. User Red Green Blue 0 0 0 Press to confirm. MENU EE Red EE 0 2 3 G 4 5 XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG Electronics unique picture improving technology to display a real HD source through an advanced digital sig-

nal processing algorithm. When selecting Picture Mode options (Dynamic, Standard, and Mild), XD is automatically changed to Auto. When selecting Picture Mode options (User 1 and User 2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD color and XD Noise. 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select XX DD. Press the GG button and then use FF or GG button to select AAuuttoo or MMaannuuaall. SSeelleeccttiinngg tthhee MMaannuuaall 1. Press the EE button and then use DD or EE but-

ton to select XXDD CCoonnttrraasstt, XXDD CCoolloorr or XXDD NNooiissee. I XXDD CCoonnttrraasstt:: Optimizing the contrast automatically according to the brightness of the reflection. I XXDD CCoolloorr:: Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors. I XXDD NNooiissee :: Removing the noise up to the point where it does not damage the original picture. 2. Use the FF or GG button to select OO nn or OO ff ff. 4 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen P I C T U R E C O N T R O L 1 Picture Mode Color Temperature XD G Manual Advanced Aspect Ratio Picture Reset Screen XD Contrast XD Color XD Noise On On On 2 3 49 PICTURE CONTROL ADVANCED - CINEMA 3:2 PULL DOWN MODE Set up the TV for the best picture appearance for viewing movies. When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog, DTV), AV1, AV2, and Component 480i mode. Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select AAddvvaanncceedd. Press the GG button and then use DD or EE button to select CCiinneemmaa 33::22 MMooddee. Press the GG button and then use FF or GG button to select OO nn or OO ff ff. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen 1 Picture Mode Color Temperature XD Advanced G Aspect Ratio Picture Reset Screen Cinema 3:2 Mode Off Black Level Low Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 2 3 4 1 2 3 4 5 P I C T U R E C O N T R O L 50 ADVANCED - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV1, AV2, HDMI1, HDMI2, or HDMI3 mode. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select AAddvvaanncceedd. Press the GG button and then use DD or EE button to select BBllaacckk lleevveell. Press the GG button and then use FF or GG button to select LL oo ww or HHiigghh. I LL oo ww The screen gets darker. I HHiigghh The screen gets brighter. 5 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen P I C T U R E C O N T R O L 1 Picture Mode Color Temperature XD Advanced G Cinema 3:2 Mode Off Aspect Ratio Picture Reset Screen Black Level Low 2 3 4 51 PICTURE CONTROL PICTURE RESET Use to quickly reset all the Picture menu options to their original factory preset values. P I C T U R E C O N T R O L 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select PPiiccttuurree RReesseett. Press the GG button to reset the Picture menu options to original values. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen 1 Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset G Screen Selection ( G or ) resets to the factory settings(defaults). 2 3 52 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELLER (AUTO VOLUME) Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV pro-

gram. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume

: On Balance : 0 TV Speaker : On Press the GG button and then use DD or EE button to select AAuuttoo VVoolluummee. Press the GG button and then use DD or EE button to select OO nn or OO ff ff. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Sound Mode Auto Volume G Balance TV Speaker Off On 1 2 3 P I C T U R E C O N T R O L 53 SOUND &LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. SSttaannddaarrdd, MMuussiicc, MMoovviiee, and SSppoorrttss are preset for good sound quality at the factory and are not adjustable. POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

CC MENU SAP EXIT TIMER ENTER Press the SSOOUUNNDD button repeatedly to select the appropriate sound setup as below :

SSttaannddaarrdd, MMuussiicc, MMoovviiee, SSppoorrttss, and UUsseerr (your own settings). Press EEXXIITT button to return to TV viewing. 1 2 I You can also adjust SSoouunndd MMooddee in the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume

: On Balance : 0 TV Speaker : On Sound Mode G Standard Auto Volume Balance TV Speaker Music Movie Sports User S O U N D

L A N G U A G E C O N T R O L 54 SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Press the MMEENNUU button and then use DD or EE button to select the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume

: On Balance : 0 TV Speaker : On 1 2 3 4 5 Press the GG button and then use DD or EE button to select SSoouunndd MMooddee. Press the GG button and then use DD or EE button to select UUsseerr. Press the GG button and then use DD or EE button to select the desired sound option (TTrreebbllee, BBaassss, or FFrroonntt SSuurrrroouunndd). Press the GG button and then use FF or GG button to make appropriate adjustments. SSeelleeccttiinngg tthhee FFrroonntt ssuurrrroouunndd Press the GG button and then use FF or GG button to select OO ff ff, 33DD EEcchhooSSoouunndd SSyysstteemm or SSRRSS (Sound Retrieval System) TTrruuSSuurrrroouunndd XXTT. 6 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. SSRRSS TTrruuSSuurrrroouunndd XXTT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material. 33DD EEcchhooSSoouunndd SSyysstteemm Creates a stunning simulated stereo effect from any mono sound and a realistic three-dimensional sound with a very wide and deep sound stage. Sound Mode Auto Volume Balance TV Speaker Standard Music Movie Sports User 1 G Selection ( G or ) leads you to the detailed setting screen. 2 3 G User Treble 50 Bass 50 Front Surround Off Press to confirm. MENU Front Surround 3D EchoSound System 4 5 S O U N D

L A N G U A G E C O N T R O L 55 SOUND &LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume

: On Balance : 0 TV Speaker : On Press the GG button and then use DD or EE button to select BBaallaannccee. Press the GG button and then use FF or GG button to make appropriate adjustments. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker 0 L R Balance 0 L R 1 2 3 1 2 3 4 S O U N D

L A N G U A G E C O N T R O L 56 TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume

: On Balance : 0 TV Speaker : On Press the GG button and then use DD or EE button to select TTVV SSppeeaakkeerr. Press the GG button and then use DD or EE button to select OO nn or OO ff ff. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker G Off On 1 2 3 4 1 2 3 S O U N D

L A N G U A G E C O N T R O L 57 SOUND &LANGUAGE CONTROL POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

CC MENU SAP EXIT TIMER ENTER STEREO/SAP BROADCAST SETUP This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the sta-

tion transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting. Stereo or SAP can be received in Analog channel. 1 Use the SS AA PP button to select your desired MTS mode in analog signal. Each time you press the SS AA PP button, MMoonnoo, SStteerreeoo, or SS AA PP appear in turn. I If other languages available on the digital signal, select them with the SS AA PP button. 2 Press EEXXIITT button to save and return to TV viewing. S O U N D

L A N G U A G E C O N T R O L 58 AUDIO LANGUAGE Other languages may be available if a digital signal is pro-

vided by the broadcasting station. This feature operates only in DTV/CADTV mode. 1 2 3 4 5 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select LLaanngguuaaggee. Press the GG button and then use DD or EE button to select AAuuddiioo. Press the GG button and then use FF or GG button to select : EEnngglliisshh, SSppaanniisshh, or FFrreenncchh. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Language : English Input Label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input Label SimpLink Key Lock Caption Set ID Language Input Label SimpLink Key Lock Caption Set ID 1 G Menu Audio English English 2 3 Menu Audio English English 4 S O U N D

L A N G U A G E C O N T R O L 59 SOUND &LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected lan-

guage. First select your language. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select LLaanngguuaaggee.. Press the GG button and then use DD or EE button to select MMeennuu.. Press the GG button and then use FF or GG button to select your desired language. From this point on, the on-screen menus will be shown in the selected language. 5 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Language : English Input Label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input Label SimpLink Key Lock Caption Set ID Language Input Label SimpLink Key Lock Caption Set ID 1 G Menu Audio English English 2 3 Menu Audio English English 4 S O U N D

L A N G U A G E C O N T R O L 60 POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

CC MENU SAP EXIT TIMER ENTER CAPTION MODE Caption must be provided to help people with hearing loss watch TV. Use the CC CC button to select Caption OO nn or OO ff ff. I When selecting OO ff ff, Sub-menus for Analog, DTV, and Digital Option become disabled. Press EEXXIITT to save and return to TV viewing. 1 2 I You can also adjust CCaappttiioonn in the OOPPTTIIOONN menu. Language : English Input Label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input Label SimpLink Key Lock Caption Set ID G Mode On Analog Text1 Digital Service3 Digital Option S O U N D

L A N G U A G E C O N T R O L 61 SOUND &LANGUAGE CONTROL Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memoririze the caption/text mode which was last set when you turn the power off. This function is only available when CCaappttiioonn Mode is set OO nn. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Language : English Input Label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input Label SimpLink Key Lock Caption Set ID 1 Mode Analog Digital On Text1 Service3 Digital Option 2 3 4 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select CCaappttiioonn.. Press the GG button and then use DD or EE button to select AAnnaalloogg.. Press the GG button and then use FF or GG button to select CC CC 11, CC CC 22, CC CC 33, CC CC 44, TT ee xx tt 11, TT ee xx tt 22, TTeexxtt33 or TTeexxtt44 I CCAAPPTTIIOONN The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. I TTEEXXTT The term for the words that appear in a large black frame and almost cover the entire screen; usually mes-

sages provided by the broadcaster. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 5 S O U N D

L A N G U A G E C O N T R O L 62 Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 1 2 3 4 5 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select CCaappttiioonn. Language : English Input Label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Press the GG button and then use DD or EE button to select DDiiggiittaall. Press the GG button and then use FF or GG button to select SSeerrvviiccee11 ~ SSeerrvviiccee66. Language Input Label SimpLink Key Lock Caption Set ID Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 1 Mode Analog Digital On Text1 Service3 Digital Option 2 3 4 S O U N D

L A N G U A G E C O N T R O L 63 SOUND &LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. 1 2 3 4 5 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select CCaappttiioonn. Press the GG button and then use DD or EE button to select DDiiggiittaall OOppttiioonn. Press the GG button and then use FF or GG button to select CCuussttoomm. Use DD or EE button to customize the SSttyyllee, FFoonntt, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language. I SSiizzee : Set the word size. I FFoonntt : Select a typeface for the text. I TTeexxtt CCoolloorr : Choose a color for the text. I TTeexxtt OOppaacciittyy : Specify the opacity for the text color. I BBgg ((BBaacckkggrroouunndd)) CCoolloorr : Select a background color. I BBgg ((BBaacckkggrroouunndd)) OOppaacciittyy : Select the opacity for the background color. I EEddggee TTyyppee : Select an edge type. I ddggee CCoolloorr : Select a color for the edges. 6 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. S O U N D

L A N G U A G E C O N T R O L 64 CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Language : English Input Label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input Label SimpLink Key Lock Caption Set ID Language Input Label SimpLink Key Lock Caption Set ID 1 Mode Analog Digital On Text1 Service3 Digital Option G Selection ( Gor ) leads you to the Caption Option screen. 2 3 Mode Analog Digital On Text1 Custom Style Size A Standard Font Font 0 Text Color White Text Opacity Solid Bg Color Black Bg Opacity Solid Edge Type None Edge Color Black Service3 Digital Option G Selection ( Gor ) leads you to the Caption Option screen. 4 5 TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the TTIIMMEE menu. Press the GG button and then use DD or EE button to select CClloocckk. Press the GG button and then use DD or EE button to select AAuuttoo. Press the GG button and then use DD or EE button to select your viewing area time zone:

U.S.A : EE aa ss tt ee rr nn, CC ee nn tt rr aa ll, MM oo uu nn tt aa ii nn, PP aa cc ii ff ii cc, AAllaasskkaa or HHaawwaaiiii. Canada : EE aa ss tt ee rr nn, CC ee nn tt rr aa ll, MM oo uu nn tt aa ii nn, PP aa cc ii ff ii cc, NNeeww FF..llaanndd or AAttllaannttiicc. 5 Press the GG button and then use DD or EE button to select AAuuttoo, OO ff ff, OO nn, depending on whether or not your viewing area observes Daylight Saving time. 6 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3

: Oct 19, 2006, 03:44 AM

: Off

: Off

: Off

: Off 1 G DD EE Auto G Year - - - -

Date - - / - -

Time - - : - - - -

Time Zone Eastern Daylight Saving Auto 2 3 G Auto Year - - - -

Date - - / - -

Time - - : - - - -

Time Zone Eastern DD EE G Daylight Saving Auto 4 5 Clock Off Time On Time Sleep Time Auto Sleep Clock Off Time On Time Sleep Time Auto Sleep Clock Off Time On Time Sleep Time Auto Sleep S O U N D

L A N G U A G E C O N T R O L 65 Manual Clock Setup If the current time setting is wrong, reset the clock manually. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the TTIIMMEE menu. Press the GG button and then use DD or EE button to select CClloocckk. Press the GG button and then use DD or EE button to select MMaannuuaall. Press the GG button and then use FF or GG button to select either the year, date, or time option. Once selected, use the DD or EE button to set the year, date, and time options. 5 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3

: Oct 19, 2007, 03:44 AM

: Off

: Off

: Off

: Off Clock Off Time On Time Sleep Time Auto Sleep 1 Clock Off Time On Time Sleep Time Auto Sleep G DD EE Manual G Year - - - -

Date - - / - -

Time - - : - - - -

2 3 I T M E S E T T I N G 66 AUTO ON/OFF TIMER SETTING This function operates only if the current time has been set. The OOffff TTiimmee function overrides the OOnn TTiimmee function if they are both set to the same time. The TV must be in standby mode for the OOnn TTiimmee to work. If you do not press any button within 2 hours after the TV turns on with the OOnn TTiimmee function, the TV will automati-

cally revert to standby mode. 1 2 3 4 5 6 Press the MMEENNUU button and then use DD or EE button to select the TTIIMMEE menu. Press the GG button and then use DD or EE button to select OOffff TTiimmee or OOnn TTiimmee. Press the GG button and then use DD or EE button to select OO nn. I To cancel the OOnn//OOffff ttiimmee function, select OO ff ff. Press the GG button and then use DD or EE button to the hour. Press the GG button and then use DD or EE button to the minutes. OOnnllyy OOnn TTiimmee Press the GG button and then use DD or EE button to select the channel at turn-on. Press the GG button and then use DD or EE button to the sound level at turn-on. 7 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Clock Off Time On Time Sleep Time Auto Sleep

: Oct 19, 2007, 03:44 AM

: Off

: Off

: Off

: Off Clock Off Time On Time Sleep Time Auto Sleep 1 G Off On Time 6 : 30 AM Ch. TV 2-0 Vol 17 2 3 4 5 6 I T M E S E T T I N G 67 TIME SETTING SLEEP TIME SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. 1 2 3 4 Press the TTIIMMEERR button repeatedly to select the number of minutes. First the OO ff ff option appears on the screen, fol-

lowed by the following sleep time options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you want is displayed on the screen, press the EENNTTEERR button. The timer begins to count down from the number of minutes selected. To check the remaining minutes before the TV turns off, press the TTIIMMEERR button once. To cancel the Sleep Time, press the TTIIMMEERR button repeat-

edly to select OO ff ff. I You can also set up the SSlleeeepp TTiimmee in the TTIIMMEE menu. Clock Off Time On Time Sleep Time Auto Sleep

: Oct 19, 2006, 03:44 AM

: Off

: Off

: Off

: Off I T M E S E T T I N G 68 POWER INPUT TV INPUT RATIO MODE TV DVD VCR COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST

CC MENU SAP EXIT TIMER ENTER Clock Off Time On Time Sleep Time Auto Sleep G Off 10 min 20 min 30 min 60 min 90 min 120 min 180 min 240 min AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the TTIIMMEE menu. Press the GG button and then use DD or EE button to select AAuuttoo SSlleeeepp. Press the GG button and then use DD or EE button to select OO nn or OO ff ff. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3

: Oct 19, 2007, 03:44 AM

: Off

: Off

: Off

: Off Clock Off Time On Time Sleep Time Auto Sleep 1 I T M E S E T T I N G Clock Off Time On Time Sleep Time Auto Sleep TV will be automatically turned off, in case of No Signal for 10 minutes. G Off On 2 3 69 PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possi-

ble to block all program viewing for a time period. To use this function, the following must be done :

1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies :

I TV-G (General audience) I TV-PG (Parental guidance suggested) I TV-14 (Parents strongly cautioned) I TV-MA (Mature audience only) I TV-Y I TV-Y7 (Children 7 years older)

(All children) SET PASSWORD & LOCK SYSTEM Setting up Your Password Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. 1 Press the MMEENNUU button and then use the DD or EE button to select the LLOOCCKK menu. Then, press the GG button. I Enter the password as requested. I The TV is set up with the initial password 0-0-0-0. Enter Password Enter Password

P A R E N T A L C O N T R O L

R A T I N G 70 CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Set Password Change the password by inputting a new password twice. 1 2 After inputting the password, use the DD or EE button to choose SSeett ppaasssswwoorrdd. Press the GG button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the CCoonnffiirrmm. Then your changed password has been memorized. 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Lock System Enables or disables the blocking scheme you set up previously. 1 2 After inputting the password, use the DD or EE button to choose LLoocckk SSyysstteemm. Press the GG button and then use the DD or EE button to select OO nn or OO ff ff. I When you select OO nn, the Lock System is enable. 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. For USA For Canada Lock System : Off Lock System : Off Set Password Block Channel Movie Rating Set Password Block Channel TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Input Block Input Block G New Confirm

Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block 1 2 For USA For Canada Lock System : Off Lock System : Off Set Password Block Channel Movie Rating Set Password Block Channel TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Input Block Input Block G Off On Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block 1 2 P A R E N T A L C O N T R O L

R A T I N G 71 PARENTAL CONTROL /RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. 1 2 3 4 After inputting the password, use the DD or EE button to choose BBlloocckk CChhaannnneell. Press the GG button. You will now see a screen filled with channel numbers and a preview picture. Use DD EE FF GG button to select a channel and then use the EENNTTEERR button to block or unblock it. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. EXTERNAL INPUT BLOCKING Enables you to select a source to block from the external source devices you have hooked up. 1 2 3 4 After inputting the password, use the DD or EE button to choose IInnppuutt BBlloocckk. Press the GG button and then use the DD or EE button to select a source. Press the GG button and then use the FF or GG button to select OO nn or OO ff ff on the each source. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. P A R E N T A L C O N T R O L

R A T I N G 72 Lock System Set Password Block Channel G Selection ( G or ) leads you to the block channel screen. Movie Rating TV Rating-Children TV Rating-General Input Block 1 2 3 For USA For Canada Lock System : Off Lock System : Off Set Password Block Channel Movie Rating Set Password Block Channel TV Rating-English TV Rating-Children TV Rating-French TV Rating-General Input Block Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block 1 AV1 On AV2 On Component1 Off Component2 On RGB-PC Off G HDMI1 Off HDMI2 Off HDMI3 Off 2 3 MOVIE & TV RATING Movie Rating (MPAA) - for USA only Blocks movies according to the movie ratings limits speci-

fied, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. 1 2 After inputting the password, use the DD or EE button to choose MMoovviiee RRaattiinngg. Press the GG button and then use the DD or EE button to select GG, PP GG, PPGG--1133, RR, NNCC--1177 or XX. I G (General audience) I PG (Parental guidance suggested) I PG-13 (Parents strongly cautioned) I R (Restricted) I NC-17 (No one 17 and under admitted) I X (Adult only) I Blocking Off (Permits all programs) GG If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. CC MENU SAP EXIT TIMER ENTER VOL FAV MUTE CH 1 2 3 Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block G 1 Blocking off : permits all programs G PG PG-13 R NC-17 X Blocking Off 2 P A R E N T A L C O N T R O L

R A T I N G 73 PARENTAL CONTROL /RATINGS TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV pro-

grams intended for mature audiences in the TV Rating - sub menu, your children can view those programs. 1 2 After inputting the password, use the DD or EE button to choose TTVV RRaattiinngg--CChhiillddrreenn. Press the GG button and then use the DD or EE button to select AA gg ee, or FFaannttaassyy VViioolleennccee. Press the GG button and then use the DD or EE button to select block options. I Age(applies to TV-Y, TV-Y7) I Fantasy Violence(applies to TV-Y7) 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. TV Rating General - for USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view. 1 2 After inputting the password, use the DD or EE button to choose TTVV RRaattiinngg--GGeenneerraall. Press the GG button and then use the DD or EE button to select AA gg ee, DDiiaalloogguuee, LLaanngguuaaggee, SS ee xx or VViioolleennccee. Press the GG button and then use the DD or EE button to select block options. I Age(applies to TV-G,TV-PG,TV-14,TV-MA) I Dialogue-sexual dialogue (applies to TV-PG,TV-14) I Language-adult language (applies to TV-PG,TV-14,TV-MA) I Sex-sexual situations (applies to TV-PG,TV-14,TV-MA) I Violence (applies to TV-PG,TV-14,TV-MA) 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. P A R E N T A L C O N T R O L

R A T I N G 74 Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children G TV Rating-General Input Block Age Fantasy Violence Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General G Input Block Age Dialogue Language Sex Violence 1 2 1 2 TV Rating English - for CANADA only Selecting canadian english language rating system. 1 2 After inputting the password, use the DD or EE button to choose TTVV RRaattiinngg--EEnngglliisshh. Press the GG button and then use the DD or EE button to select EE, CC, CC88++, GG, PP GG, 1144++, 1188++, or BBlloocckkiinngg OOffff. Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Input Block I E (Exempt) I C (Children) I C8+ (Children eight years and older) I G (General programming, suitable for all audiences) I PG (Parental Guidance ) I 14+ (Viewers 14 years and older) I 18+ (Adult programming) I Blocking Off (Permits all programs) 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. TV Rating French - for CANADA only Selecting canadian french language rating system. 1 2 After inputting the password, use the DD or EE button to choose TTVV RRaattiinngg--FFrreenncchh. Press the GG button and then use the DD or EE button to select EE, GG, 88aannss++, 1133aannss++, 1166aannss++, 1188aannss++, or BBlloocckkiinngg ooffff. I E(Exempt) I G(General) I 8ans+ (General-Not convenient for little children) I 13ans+ (Not convenient for children of 13 years and younger) I 16ans+ (Not convenient for children of 16 years and younger) I 18ans+ (This programs is only for adults) I Blocking off (Permits all programs) 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Lock System Set Password Block Channel TV Rating-English G TV Rating-French Input Block 1 Blocking off : permits all programs E C C8+

G PG 14+

18+

Blocking Off 2 1 P A R E N T A L C O N T R O L

R A T I N G Lock System Set Password Block Channel TV Rating-English TV Rating-French G Input Block Blocking off : permits all programs E G 8 ans+

13 ans+

16 ans+

18 ans+

Blocking Off 2 75 APPENDIX TROUBLESHOOTING TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy.. The remote control doesnt work I Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. I Ensure that the batteries are installed with correct polarity (+ to +, - to -). I Ensure that the correct remote operating mode is set: TV, VCR etc. I Install new batteries. Power is suddenly turned off I Is the sleep timer set?

I Check the power control settings. Power interrupted. I No broadcast on station tuned with Auto off activated. TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. No picture &No sound I Check whether the product is turned on. I Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet?

I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly after switching on I This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. No or poor color or poor picture Horizontal/vertical bars or picture shaking I Adjust Color in menu option. I Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly?

I Activate any function to restore the brightness of the picture. I Check for local interference such as an electrical appliance or power tool. Poor reception on some channels I Station or cable product experiencing problems, tune to another station. I Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference. Lines or streaks in pictures I Check antenna (Change the direction of the antenna). A P P E N D I X 76 TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product I Press the VOL or VOLUME button. I Sound muted? Press MUTE button. I Try another channel. The problem may be with the broadcast. I Are the audio cables installed properly?

I Adjust Balance in menu option. I A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd)) The signal is out of range I Adjust resolution, horizontal frequency, or vertical frequency. I Check the input source. Vertical bar or stripe on background &

Horizontal Noise &

Incorrect position I Work the Auto configure or adjust clock, phase, or H/V position. (Option) Screen color is unstable or single color I Check the signal cable. I Reinstall the PC video card. A P P E N D I X 77 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet I To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. I Please be sure not to use a wet cloth. Extended Absence CAUTION GG If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. A P P E N D I X 78 PRODUCT SPECIFICATIONS I The specifications shown above may be changed without prior notice for quality improvement. MODELS 26LC7D

(26LC7D-UK) 32LC4D

(32LC4D-UJ) 42LC4D

(42LC4D-UJ) Dimensions Including stand 26.6 x 20.9x 8.7 inches 31.8 x 23.8x 9.8 inches 40.7 x 29.5 x 11.3 inches 676.5 x 531.0 x 221.0mm 806.8 x 605.6 x 249.0mm 1032.7 x 750.0 x 287.6 mm

(Width x Height x Depth) Excluding stand 26.6 x 18.8 x 3.3 inches 31.8 x 21.6 x 3.1 inches 40.7 x 27.0x 3.5 inches 676.5 x 478.7 x 84.0 mm 806.8 x 548.6 x 79.0 mm 1032.7 x 685.5 x 88.5 mm Weight including stand excluding stand 21.2 pounds / 9.62 kg 30.4 pounds / 13.8kg 54.0 pounds / 24.5 kg 19.0 pounds / 8.62 kg 24.9 pounds / 11.3 kg 44.1 pounds / 20.0 kg Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%

-4 ~ 140F (-20 ~ 60C) Less than 85%

A P P E N D I X 79 APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode To find out whether your remote control can operate each device without programming, turn on the device

(such as a VCR) and press the corresponding mode button on the remote. After that, press the PPOOWWEERR button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The program-

ming procedures are explained below. Press the MMEENNUU and MMUUTTEE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2. Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful. Press the MMEENNUU button to store the code. After blinking twice, this code is stored. Test the remote control functions to see if the device responds properly. If not, steps 2-5. 1 2 3 4 5 A P P E N D I X 80 Codes Brand Codes Brand Codes Remote Control Code VCR Brand AIWA AKAI 034 016 043 046 124 125 146 072 031 033 103 AMPRO ANAM AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 132 136 012 045 004 018 026 034 043 063 137 150 DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO HARMAN KARDON HITACHI INSTANTREPLAY 031 033 031 033 JCL 012 013 015 033 JCPENNY 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 014 034 039 043 047 048 JENSEN JVC KENWOOD LG (GOLDSTAR) 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 SEARS SCOTT SAMSUNG SANSUI SANYO SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 008 009 010 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC WARDS SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 YAMAHA ZENITH A P P E N D I X 81 APPENDIX DVD Brand Codes 022 020 014 005 006 027 APEX DIGITAL DENON GE HARMAN KARDON JVC LG MAGNAVOX MARANTZ 012 001 010 016 025 013 024 Brand MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN Codes 002 023 008 017 003 009 013 004 026 021 005 006 Brand Codes RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 006 011 015 007 005 006 019 008 009 018 010 016 025 A P P E N D I X 82 IR CODES 1. How to Connect I Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes I Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 I Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame I Lead code I Repeat code I BBiitt ddeessccrriippttiioonn Bit 0 Repeat code Tf 9 ms 4.5 ms 9 ms 2.25 ms 0.55 ms Bit 1 0.56 ms 1.12 ms 0.56 ms 2.24 ms I FFrraammee iinntteerrvvaall:: TTff The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz A P P E N D I X 83 APPENDIX Code

(Hexa) Function Note Code

(Hexa) Function Note 0F 0B 08 79 0E TV INPUT Remote control Button BF COMPONENT1 Discrete IR Code INPUT POWER RATIO TIMER Remote control Button

(Component1 Input Selection) Remote control Button (Power On/Off) D4 COMPONENT2 Discrete IR Code Remote control Button

(Component2 Input Selection) Remote control Button D5 RGB-PC Discrete IR Code 10-19 Number Key 0-9 Remote control Button

(RGB-PC Input Selection)

- (Dash) Remote control Button CE HDMI1/DVI Discrete IR Code Remote control Button

(HDMI1/DVI Input Selection) Remote control Button CC HDMI2 Discrete IR Code

(HDMI2 Input Selection) 76 77 AF Ratio 4:3 Discrete IR Code

(Only 4:3 Mode) Ratio 16:9 Discrete IR Code

(Only 16:9 Mode) Ratio Zoom Discrete IR Code

(Only Zoom1 Mode) 4C 1A 09 02 03 00 01 1E 7E 39 40 41 07 06 44 43 52 4D 5B 0A CB E1 E0 D6 C4 C5 5A BACK MUTE VOL +

VOL -

CH +

CH -

FAV Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button SIMPLINK Remote control Button CC DD EE FF GG ENTER MENU SOUND PICTURE EXIT SAP Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button ADJUST Remote control Button TV Remote control Button Remote control Button Discrete IR Code

(TV Input Selection) POWER ON Discrete IR Code

(Only Power On) POWER OFF Discrete IR Code AV1

(Only Power Off) Discrete IR Code

(AV1 Input Selection) D0 AV2 Discrete IR Code

(AV2 Input Selection) A P P E N D I X 84 EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. I Note: RS-232C on this unit is intended to be used with third party RS-232 control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup B IN AUDIO

(RGB/DVI) SERVICE REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL PONENT IN RS-232C IN

(CONTROL & SERVICE) AUDIO OUT AUDIO S-VIDEO

) AUDIO

VIDEO MONO 1 N I V A Type of Connector; D-Sub 9-Pin Male No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection 1 6 5 9 PC A P P E N D I X 85 APPENDIX RS-232C Configurations Either cable below can be used. 7-Wire Configuration

(Serial female-female NULL modem cable) 3-Wire Configurations

(Not standard) PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS TV 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS Set ID CC MENU SAP EXIT TIMER ENTER Language : English Input Label SimpLink Key Lock Caption Set ID

: Off

: Off

: Off

: 1 Language Input label SimpLink Key Lock Caption Set ID G 1 1 2 3 Use this function to specify a TV ID number. Refer to Real Data Mapping1. GG pp..8888. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select SSeett IIDD. Press the GG button and then use DD or EE button to adjust SSeett IIDD to choose the desired TV ID number. The adjustment range of Set ID is 1~99. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Communication Parameters I Baud rate : 9600 bps (UART) I Data length : 8 bits I Parity : None I Stop bit : 1 bit I Communication code : ASCII code I Use a crossed (reverse) cable.

NOTE GG This product has command echo back in the RS-232C Command. A P P E N D I X 86 Command Reference List CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA

(Hexadecimal) CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA

(Hexadecimal) 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 21. Channel Tuning 22. Channel Add/Del 23. Key 24. Input Select 25. Back Light k k k k k k k k k k k k a b c d e f g h i j k l 0 ~ 1 0 ~ 9

(GG p.88) 0 ~ 1 0 ~ 1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 1 13. Remote Control Lock Mode 14. Treble 15. Bass 16. Balance 17. Color Temperature 18. Red Adjustment 19. Green Adjustment 20. Blue Adjustment k k k k k k k k m r s t u v w

0 ~ 1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 3 0 ~ C8 0 ~ C8 0 ~ C8 CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA0 DATA1 DATA2 DATA3 DATA4 DATA5

(Hexadecimal)

(Hexadecimal)

(Hexadecimal)

(Hexadecimal)

(Hexadecimal)

(Hexadecimal) physical major major low minor high minor low attribute m a program high program low 0 ~ 1 m

(GG p.91) m

(GG p.91) x m g 0~64 b c b Transmission / Receiving Protocol TTrraannssmmiissssiioonn

[[CCoommmmaanndd11]][[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[DDaattaa]][[CCrr]]

[Command 1] : First command to control the set.(j, k, m or x)

[Command 2] : Second command to control the set.

[Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission

/receiving protocol.

[DATA] : To transmit command data. Transmit FF data to read status of command.

* In this model, TV will not send the status during the standby mode.

[Cr] : Carriage Return ASCII code 0x0D

[ ] : ASCII code space (0x20) OOKK AAcckknnoowwlleeddggeemmeenntt

[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[OOKK]][[DDaattaa]][[xx]]

The TV transmits ACK (acknowledgement) based on this for-

mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

* In this model, TV will not send the status during the standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.

[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.

[OK] : Use the large character.

* In this model, TV will send the echo, CR, LF with acknowl-

edgement message.

* When it send the power on acknowledgement message, it will be like below. ex) ka 01 01 (CR) (LF) a 01 OK 01 x (CR) (LF) EErrrroorr AAcckknnoowwlleeddggeemmeenntt

[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[NNGG]][[DDaattaa]][[xx]]

The TV transmits ACK (acknowledgement) based on this for-

mat when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time

* In this model, TV will not send the status during the standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.

[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.

[NG] : Use the large character

* In this model, TV will send the echo, CR, LF with acknowl-

edgement message.

* When it send the power on acknowledgement message, it will be like below. ex) ka 01 01 (CR) (LF) a 01 NG 01 x (CR) (LF) A P P E N D I X 87 APPENDIX 0011.. PPoowweerr ((CCoommmmaanndd22::aa)) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 0: Power Off Data 1: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function.

* Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 0022.. IInnppuutt SSeelleecctt ((CCoommmmaanndd22::bb)) ((MMaaiinn PPiiccttuurree IInnppuutt)) To select input source for the TV. Transmission [k][b][ ][Set ID][ ][Data][Cr]

Data 0: DTV 5: Component 2 1: Analog 2: AV1 3: AV2 4: Component 1 7: RGB-PC 8: HDMI1/DVI 9: HDMI2 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

0033.. AAssppeecctt RRaattiioo ((CCoommmmaanndd22::cc)) To adjust the screen format. You can also adjust the screen format using the RATIO button on remote control or in the Picture menu. Transmission [k][c][ ][Set ID][ ][Data][Cr]

Date 1: 4:3 2: 16:9 3: Horizon 4: Zoom 1 5: Zoom 2 6: Set by program Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

0044.. SSccrreeeenn MMuuttee ((CCoommmmaanndd22::dd)) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 0: Screen mute off (Picture on) Data 1: Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

0055.. VVoolluummee MMuuttee ((CCoommmmaanndd22::ee)) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 0 : Volume mute on (Volume off) Data 1 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

0066.. VVoolluummee CCoonnttrrooll ((CCoommmmaanndd22::ff)) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64 Refer to Real data mapping 1 as shown below. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

0077.. CCoonnttrraasstt ((CCoommmmaanndd22::gg)) To adjust screen contrast. You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

*Refer to Real data mapping 1 as shown below. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

0088.. BBrriigghhttnneessss ((CCoommmmaanndd22::hh)) To adjust screen brightness. You can also adjust brightness in the Picture menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code)

*Refer to Real data mapping 1 as shown below. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

*Real data mapping 1 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 A P P E N D I X 88 0099.. CCoolloorr ((CCoommmmaanndd22::ii)) To adjust the screen color. You can also adjust color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

*Refer to Real data mapping 1. See page 88. 1155.. BBaassss ((CCoommmmaanndd22::ss)) To adjust bass. You can also adjust bass in the Audio menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)

*Refer to Real data mapping 1. See page 88. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

1100.. TTiinntt ((CCoommmmaanndd22::jj)) To adjust the screen tint. You can also adjust tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red: 0 ~ Green: 64

*Refer to Real data mapping 1. See page 88. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

1111.. SShhaarrppnneessss ((CCoommmmaanndd22::kk)) To adjust the screen sharpness. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

*Refer to Real data mapping 1. See page 88. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

1122.. OOSSDD SSeelleecctt ((CCoommmmaanndd22::ll)) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 0: OSD off Data 1: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

1133.. RReemmoottee CCoonnttrrooll LLoocckk MMooddee ((CCoommmmaanndd22::mm)) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 0: Lock off Data 1: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. 1144.. TTrreebbllee ((CCoommmmaanndd22::rr)) To adjust treble. You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping 1. See page 88. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

1166.. BBaallaannccee ((CCoommmmaanndd22::tt)) To adjust balance. You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)

*Refer to Real data mapping 1. See page 88. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

1177.. CCoolloorr TTeemmppeerraattuurree ((CCoommmmaanndd22::uu)) To adjust color temperature. You can also adjust color temperature in the Picture menu. Transmission [k][u][ ][Set ID][ ][Data][Cr]

Data 0: Medium 1: Cool 2: Warm 3: User Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

1188.. RReedd AAddjjuussttmmeenntt ((CCoommmmaanndd::vv)) To adjust red in color temperature Transmission [k][v][ ][Set ID][ ][Data][Cr]

Data Min:0 ~ Max:C8

*Refer to Real data mapping 2 as shown below. Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]

1199.. GGrreeeenn AAddjjuussttmmeenntt ((CCoommmmaanndd::ww)) To adjust green in color temperature. Transmission [k][w][ ][Set ID][ ][Data][Cr]

Max: C8

*Refer to Real data mapping 2 as shown below. Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]

*Real data mapping 2 0 : -20 5 : -19 A : -18 5F: -1 64: 0 69: +1 C3 : +19 C8 : +20 A P P E N D I X 89 APPENDIX 2200.. BBlluuee AAddjjuussttmmeenntt ((CCoommmmaanndd::$$)) To adjust blue in color temperature. Transmission [k][$][ ][Set ID][ ][Data][Cr]

Data Min:0 ~ Max:C8

*Refer to Real data mapping 2. See page 89. Acknowledgement [$][ ][Set ID][ ][OK/NG][Data][x]]

2211.. CChhaannnneell TTuunniinngg ((CCoommmmaanndd:: mm aa)) To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]

[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]

Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 0: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 Data1 & 2: Major Channel Number Data1: High byte Data2: Low byte Two bytes are available for the Major and Minor, nor-

mally only the second byte is used. Data3 & 4: Minor Channel Number Not needed for NTSC. A P P E N D I X 90 Data5:

7 0 1 Main/Sub Picture Main Sub 6 0 1 Two/One Part Channel Two One 5 0 1 Using Physical Channel 4 Reserved Use No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 2 0 0 0 0 1 1 1 1 x 1 1 0 0 1 1 0 0 1 1 x 1 0 0 1 0 1 0 1 0 1 x 1 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved

... Reserved The table above lists the binary code which must be converted to Hexadecimal before sending. For example:

The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.

* 7th bit : For which source do you want to change the channel.

* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.

* 5th bit: Use 0 with NTSC since it can only use the phys-

ical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.

* 4th bit: Set to 0.

* 3-0 bits: Choose signal type.

* Tune Command Examples:

1. Tune to the analog (NTSC) cable channel 35. Data 0 = Physical of 35 = 23 Data 1 & 2 = No Major = 00 00 Data 3 & 4 = No Minor = 00 00 Data 5 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital (ATSC) local channel 30-3. Data 0 = Dont know Physical = 00 Data 1 & 2 = Major is 30 = 00 1E Data 3 & 4 = Minor is 3 = 00 03 Data 5 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data0][Data1]

[Data2][Data3][Data4][x][a][ ][Set ID]

[ ][NG][Data0][x]

2222.. CChhaannnneell AAdddd//DDeell ((CCoommmmaanndd:: mm bb)) To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 0: Channel Delete Data 1: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

2233.. KKeeyy ((CCoommmmaanndd:: mm cc)) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]s Data Key code: Refer to page 84. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

2244.. IInnppuutt SSeelleecctt ((CCoommmmaanndd:: xx bb)) To select input source for TV. Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00 : DTV (Antenna) Data 40 : Component 1 Data 01 : DTV (Cable) Data 41 : Component 2 Data 10 : Analog (Antenna) Data 60 : RGB PC Data 11 : Analog (Cable) Data 90 : HDMI1/DVI Data 20 : AV1 Data 21 : AV2 Data 91 : HDMI2 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

2255.. BBaacckk LLiigghhtt ((CCoommmmaanndd:: mm gg)) To adjust screen back light. Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min:0 ~ Max:64 Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

A P P E N D I X 91