all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual 1of2 | Users Manual | 3.15 MiB | ||||
1 |
|
User manual 2of2 | Users Manual | 2.79 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User manual 1of2 | Users Manual | 3.15 MiB |
LCD TV OWNERS MANUAL PLASMA TV PLASMA TV MODELS 42PG20C 42PG20 50PG20 50PG20C 50PG60F 60PG60F LCD TV MODEL 26LG30 32LG30 37LG30 42LG30 37LG50 42LG50 47LG50 52LG50 32LG60 37LG60 42LG60 47LG60 52LG60 32LG70 42LG70 47LG70 52LG70 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. P/NO : SAC30708020 (0711-REV00) www.lgusa.com / www.lg.ca / www.lgcommercial.com ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera-
ture accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE TO CABLE/TV INSTALLER CAUTION This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product 1 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled Important Safety Instructions. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturers option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. 1 2 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat. When mounting a TV it on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV. 4 5 2 6 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 7 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 8 Only use attachments/accessories specified by the manufacturer. 9 Unplug this apparatus when unused for long periods of time. 10 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Never touch this apparatus or antenna during a thunder or lighting storm. 15 11 12 13 14 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION concerning the Power Cord :
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates dam-
age or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Outdoor use marking :
WARNING - To reduce the risk of fire or elec-
tric shock, do not expose this appliance to rain or moisture. 16 Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus. 17 GGRROOUUNNDDIINNGG Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker 18 DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The plug must remain readily operable. 3 CONTENTS WARNING / CAUTION . 1 Channel Setup
- Auto Scan (Auto Tuning) . 48
- Add / Delete Channel (Manual Tuning) . 49
- Channel Editing . 50 Input List . 51 Input Label . 52 AV Mode . 53 SimpLink . 54 USB Entry Modes . 56 Photo List . 57 Music List . 61 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 64 Preset Picture Settings
- Picture Mode - Preset . 66
- Color Tone - Preset . 67 Manual Picture Adjustment
- Picture Mode - User Mode . 68
- Color Tone - User Mode . 69 Picture Improvement Technology . 70 Advanced - Black (Darkness) Level . 71 Advanced - Eye Care . 72 Advanced - Film Mode . 73 Advanced - TruMotion . 74 TruMotion Demo . 75 Picture Reset . 76 Power Indicator . 77 Image Sticking Minimization (ISM) Method . 78 Power Saving Picture Mode . 76 SAFETY INSTRUCTIONS . 2 FEATURE OF THIS TV . 6 PREPARATION Accessories . 7 Front Panel Information . 8 Back Panel Information . 10 Stand Installation . 14 Back Cover for Wire Arrangement . 16 Desktop Pedestal Installation . 18 VESA Wall Mounting . 18 Swivel Stand . 19 Not Using the Desk-Type Stand . 19 Attaching the TV to a Desk . 19 How to join the TV Assemble to the wall to protect the TV tumbling . 20 Antenna or Cable Connection . 21 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 22 DVD Setup . 25 VCR Setup . 27 Other A/V Source Setup . 29 PC Setup . 30 USB In Setup . 38 Audio Out Setup . 39 WATCHING TV / CHANNEL CONTROL Remote Control Functions . 40 Turning On TV . 42 Channel Selection . 42 Volume Adjustment . 42 Quick Menu . 43 Installation Guide . 44 On-Screen Menus Selection . 46 4 SOUND & LANGUAGE CONTROL APPENDIX Troubleshooting . 110 Maintenance . 112 Product Specifications . 113 Programming the Remote Control . 116 IR Codes . 119 External Control Through RS-232C . 121 Auto Volume Leveller (Auto Volume) . 80 Preset Sound Setting (Sound Mode) . 81 Sound Setting Adjustment - User Mode . 82 Clear Voice . 83 Balance . 84 TV Speakers On/Off Setup . 85 Audio Reset . 86 Stereo/SAP Broadcasts Setup . 87 Audio Language . 88 On-Screen Menus Language Selection . 89 Caption Mode
- Analog Broadcasting System Captions . 90
- Digital Broadcasting System Captions . 91
- Caption Option . 92 TIME SETTING Clock Setting
- Auto Clock Setup . 93
- Manual Clock Setup . 94 Auto On/Off Timer Setting . 95 Sleep Timer Setting . 96 Auto Shut-off Setting . 97 PARENTAL CONTROL / RATINGS Set Password & Lock System . 98 Channel Blocking . 101 Movie & TV Rating . 102 Downloadable Rating . 107 External Input Blocking . 108 Key lock . 109 5 FEATURE OF THIS TV is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. LG TV with this logo can play MP3 music from a MP3 player, such as iPOD, and JPEG images from a digital camera through the USB device. With HDMI CEC support of LGs audio/video device connected to the HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control. It has three HDMI ports that connect audio and video devices with one cable and produces the highest qual-
ity digital images and sound. It has 2 HDMI ports that connect audio and video devices with one cable and produces the highest quality digital images and sound. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital tele-
vision broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p res-
olutions. LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. FOR LCD TV I If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. I Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. I Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. 6 PREPARATION ACCESSORIES Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. The accessories can be different from the figures shown here. T V S T B Q. M E N U P O W E R M E N U D V D V C R IN P U T E N T E R R E T U R N V O L F A V A V M O D E 1 MUTE 4 2 C H P A G E 7 5 3 8 6 0 9 FLASHBK 1.5V 1.5V Copyright 2007 LGE, All Rights Reserved. Owners Manual CD Manual Remote Control, Batteries Power Cord 75ohm Round Cable or Protection Cover
(Refer to P.19)
(This accessories can be different from the figures shown here depending on your models.)
* Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior. Polishing Cloth
(This feature is not available for all models.)
* Do not wipe roughly when removing stain. Please be cau-
tions of that excessive pressure may cause scratch or dis-
coloration. FFoorr PPllaassmmaa TTVV mmooddeellss OOppttiioonn EExxttrraass Cable Management Clip D-sub 15 pin Cable FFoorr LLCCDD TTVV mmooddeellss x 4 x 4 Bolts for stand assembly
(Refer to P.15) Screw for stand fixing
(Refer to P.19)
(Only 26/32/37/42LG30,
(Only 26/32LG30, 37/42LG50) 32LG50) x 3 x 4 Bolts for stand assembly
(Refer to P.15) Cable Management Clip
(Only 32/37/42/47/52LG60) P R E P A R A T O N I 7 PREPARATION FRONT PANEL INFORMATION I Image shown may differ from your TV I NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Plasma TV Model P R E P A R A T O N I Remote Control Sensor POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on. INPUT MENU ENTER INPUT VOL MENU ENTER CH VOL CH INPUT MENU ENTER VOL CH INPUT Button MENU Button ENTER Button VOLUME
(-, +) Buttons CHANNEL
(EE,DD)Buttons 8 LCD TV Model 26/32/37/42/47/52LG30/50/70 Intelligent Sensor (Except **LG30) Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on. Note: You can adjust PPoowweerr IInnddiiccaattoorr in the OPTION menu. POWER Button 32/37/42/47/52LG60 Intelligent Sensor Adjusts picture according to the surrounding conditions. POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the TV is switched on. Note: You can adjust PPoowweerr IInnddiiccaattoorr in the OPTION menu. CH VOL ENTER MENU INPUT CH VOL ENTER MENU INPUT CHANNEL (DD,EE) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button CHANNEL (DD,EE) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button P R E P A R A T O N I 9 PREPARATION BACK PANEL INFORMATION I Image shown may differ from your TV Plasma TV Model 11 10 R 1 9 N I B S U 4 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 1 3 RGB IN HDMI/DVI IN RGB(PC) 5 4 ANTENNA/
CABLE IN AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL 6 7 3 2 1 2 1 COMPONENT IN RS-232C IN
(CONTROL & SERVICE) AUDIO OUT O E D V S
I
( ) AUDIO VIDEO
( ) MONO 1 N I V A VIDEO AUDIO 2 8 9 P R E P A R A T O N I 10 10 USB INPUT 11 Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 1 2 3 4 5 6 7 8 9 HDMI/DVI IN, HDMI IN Connect a HDMI signal to HDMI port. Or DVI (VIDEO) signal to the HDMI port with a DVI to HDMI cable. COMPONENT IN Connect a component video/audio device to these jacks. RGB (PC) Connect the output from a PC. AUDIO (RGB/DVI) Connect the audio from a PC. REMOTE CONTROL PORT Connect your wired remote control. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Note: In standby mode, these ports do not work. AUDIO OUT Connect analog audio to various types of equipment. AV (Audio/Video) IN Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. P R E P A R A T O N I 11 PREPARATION I Image shown may differ from your TV LCD TV Model 26/32/37/42/47/52LG30/50 32/37/42/47/52LG60 B S U Y L N O E C U V R E S 10 1 9 R R 3 N I I M D H R I O D U A O N O M L
O E D V I 11 AV IN 2 5 4 ANTENNA/
CABLE IN 6 11 37/42/47/52LG50 1 HDMI/DVI IN 2 1 (DVI) 26/32/37/42LG30 1 HDMI IN 2 1 2 1 2 1 3 RGB IN RGB(PC) 2 3 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL
( ) RS-232C IN
(CONTROL & SERVICE) AUDIO OUT VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO MONO
( ) AUDIO 5 4 ANTENNA/
CABLE IN 6 AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL 7 RS-232C IN
(CONTROL & SERVICE) AUDIO OUT 7 R 8
( ) 9 1 N I V A 8 9 1 N I V A HDMI/DVI IN VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO MONO
( ) AUDIO 2 P R E P A R A T O N I 12 32/42/47/52LG70 10 1 9 B S U Y L N O E C U V R E S R 4 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 1 HDMI/DVI IN 3 2 1 (DVI) 2 1 11 3 RGB IN RGB(PC) 5 4 ANTENNA/
CABLE IN 6 AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL 7 RS-232C IN
(CONTROL & SERVICE) AUDIO OUT VIDEO COMPONENT IN AUDIO S-VIDEO 2 VIDEO MONO
( ) AUDIO
( ) 8 9 1 N I V A 1 2 3 4 5 6 HDMI/DVI IN, HDMI IN Connect a HDMI signal to HDMI port. Or DVI (VIDEO) signal to the HDMI port with a DVI to HDMI cable. COMPONENT IN Connect a component video/audio device to these jacks. RGB (PC) Connect the output from a PC. AUDIO (RGB/DVI) Connect the audio from a PC. REMOTE CONTROL PORT Connect your wired remote control. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. 7 8 9 DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Note: In standby mode, these ports do not work. AUDIO OUT Connect analog audio to various types of equipment. AV (Audio/Video) IN Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. 10 USB INPUT 11 Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. P R E P A R A T O N I 13 PREPARATION STAND INSTALLATION I Image shown may differ from your TV Plasma TV Model 42PG20 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV P R E P A R A T O N I 14 LCD TV Model Only 26/32/37/42LG30, 37/42LG50 32/37/42/47/52LG60 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the SSTTAANNDD BBOODDYY with CCOOVVEERR BBAASSEE of the TV. 2 Assemble the parts of the SSTTAANNDD BBOODDYY with CCOOVVEERR BBAASSEE of the TV. SSTTAANNDD BBOODDYY CCOOVVEERR BBAASSEE SSTTAANNDD BBOODDYY CCOOVVEERR BBAASSEE 3 Assemble the TV as shown. 3 Assemble the TV as shown. 4 Fix the 4 bolts securely using the holes in the back of the TV 4 Fix the 4 bolts securely using the holes in the back of the TV P R E P A R A T O N I 15 PREPARATION BACK COVER FOR WIRE ARRANGEMENT I Image shown may differ from your TV. Plasma TV Model 50/60PG60F 1 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. P R E P A R A T O N I 42/50PG10/20 Arrange the cables as shown. 1 2 Install the CABLE MANAGEMENT CLIP as shown and manage the cable. CABLE MANAGEMENT CLIP How to remove the CABLE MANAGEMENT CLIP GG Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward. Separate CABLE MANAGEMENT CLIP from TV by pressing two latches. NOTE
GG Do not hold the CABLE MANAGEMENT CLIP when moving the TV.
- If the TV is dropped, you may be injured or the product may be broken. 16 LCD TV Model 26/32/37/42/47/52LG30/50/70 32/37/42/47/52LG60 1 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 1 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section of the manual. 2 Install the CABLE MANAGEMENT CLIP as shown and manage the cable. 2 Bundle the cables together using the supplied CABLE MANAGEMENT CLIP. CABLE MANAGEMENT CLIP 3 Fit the CABLE MANAGEMENT CLIP as shown. P R E P A R A T O N I 17 PREPARATION DESKTOP PEDESTAL INSTALLATION I Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. Plasma TV Model 600 mm 400 mm R LCD TV Model 200 mm
(Only 52 inches: 800 mm) 600 mm 200 mm
(52 inches: 400 mm 26, 32 inches: 100 mm) R
( ) 400 mm
NOTE GG Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.
( ) P R E P A R A T O N I 18 SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. NOT USING THE DESK-TYPE STAND I Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover for desk-type stand installation. ATTACHING THE TV TO A DESK (Only 26/32LG30, 32LG50) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand Desk 1-Screw
(provided as parts of the product) WARNING GG This apparatus must be securely attached to the floor/wall per installation instructions. Tipping, shak-
ing, or rocking the machine may cause injury/death. P R E P A R A T O N I 19 PREPARATION PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOESNT FALL OVER. I You should purchase necessary components to prevent TV from falling off of the stand. I Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. P R E P A R A T O N I I Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. I Use a sturdy rope (not provided as parts of the product, must pur-
chase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
NOTE GG When moving the TV, undo the cords first. GG Use a platform or cabinet strong and large enough to support the size and weight of the TV GG To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. 20 I To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION I Image shown may differ from your TV. 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments
(Connect to wall antenna socket) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) Copper Wire Wall Antenna Socket Outdoor Antenna
(VHF, UHF) 2. Cable Cable TV Wall Jack R R ANTENNA/
CABLE IN Be careful not to bend the bronze wire when connecting the antenna.
( ) ANTENNA/
CABLE IN R
( ) ANTENNA/
CABLE IN RF Coaxial Wire (75 ohm) Antenna UHF VHF Signal Amplifier I To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. I If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance.
NOTE GG The TV will let you know when the analog, cable, and digital channel scans are complete. P R E P A R A T O N I 21 EXTERNAL EQUIPMENT SETUP I To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. I This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 37/42/47/52LG50 models. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting Component cable 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11 jacks on the set. 2. How to use I Turn on the digital set-top box. I/DVI IN
(Refer to the owners manual for the digital set-top box. operation) I Select CCoommppoonneenntt 11 input source by using the IINNPPUUTT button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN22 input, select CCoommppoonneenntt 22 input source. Y PB PR L R 1 2 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN D RS
(CONTR 2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO S-V Signal 480i 480p 720p 1080i 1080p Component HDMI Yes Yes Yes Yes Yes No Yes Yes Yes Yes Y, CB/PB, CR/PR Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 E X T E R N A L E Q U I P M E N T S E T U P 22 When connecting HDMI cable 1. How to connect 1 2 Connect the digital set-top box to HHDDMMII//DDVVII IINN11, 22, 33 or 44 jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. 2. How to use I Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) I Select HHDDMMII11, HHDDMMII22, HHDDMMII33, or HHDDMMII44 input source with using the IINNPPUUTT button on the remote control. RGB IN RGB(PC) A
(RG 2 1 Y PB PR VIDEO COMPONENT HDMI/DVI IN 2 1 (DVI) 1 HDMI-DTV OUTPUT HDMI-DTV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480p 1280x720p 1920x1080i 1920x1080p 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.939 60.00 E X T E R N A L E Q U I P M E N T S E T U P 23 EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable ANTENNA/
CABLE IN HDMI/DVI IN 2 1 (DVI) 2 1 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT Y PB PR L R VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A 1 2 DVI-DTV OUTPUT L R 1. How to connect 1 2 Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN11((DDVVII)) jack on the set. Connect the audio output of the digital set-top box to the AAUUDDIIOO ((RRGGBB//DDVVII)) jack on the set. 2. How to use I Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) I Select HHDDMMII11 input source with using the IINNPPUUTT button on the remote control. E X T E R N A L E Q U I P M E N T S E T U P 24 DVD SETUP When connecting Component cable 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the DVD to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO11 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB PR L R 2 Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO11 jacks on the set. 2. How to use I Turn on the DVD player, insert a DVD. I Select CCoommppoonneenntt 11 input source by using the IINNPPUUTT VI IN button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN 22 input, select CCoommppoonneenntt 22 input source. I Refer to the DVD player's manual for operating instructions. 1 2 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN D O RS-
(CONTRO 2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO S-V Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr E X T E R N A L E Q U I P M E N T S E T U P 25 EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable 1. How to connect S-VIDEO AUDIO L R 1 2 Connect the S-VIDEO output of the DVD to the SS --VVIIDDEEOO input on the set. Connect the audio outputs of the DVD to the AAUUDDIIOO input jacks on the set. 2. How to use I Turn on the DVD player, insert a DVD. I Select AA VV 11 input source by using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. When connecting HDMI cable 1. How to connect 1 2 Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN11, 22, 33 or 44 jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. 2. How to use I Select HHDDMMII11, HHDDMMII22, HHDDMMII33, or HHDDMMII44 input source by using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. ANTENNA/
CABLE IN UDIO B/DVI) REMOTE CONTROL IN 2 1 DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT L R AUDIO N S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A HDMI/DVI IN 2 1 (DVI) RGB(PC) AUDIO
(RGB/D 2 1 Y PB PR L VIDEO COMPONENT IN A 1 HDMI-DVD OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 26 VCR SETUP I To avoid picture noise (interference), leave an adequate distance between the VCR and TV. I Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. When connecting with an antenna ANTENNA/
CABLE IN AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT PR L R AUDIO NENT IN S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A 1 ANT OUT S-VIDEO VIDEO L R ANT IN OUTPUT SWITCH Wall Jack 2 Antenna 1. How to connect 1 2 Connect the RF antenna out socket of the VCR to the AANNTTEENNNNAA//CCAABBLLEE IINN socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use I Set VCR output switch to 3 or 4 and then tune TV to the same channel number. I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) E X T E R N A L E Q U I P M E N T S E T U P 27 EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable ANT IN S-VIDEO VIDEO L R 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red) 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) I Select AA VV 11 input source by using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN22, select AA VV 22 input source. ANT OUT OUTPUT SWITCH 1 ANTENNA/
CABLE IN UDIO B/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT L R AUDIO N S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A
NOTE GG If you have a mono VCR, connect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the set. When connecting with an S-Video cable ANT IN S-VIDEO VIDEO L R 1. How to connect 1 2 Connect the S-VIDEO output of the VCR to the SS --VVIIDDEEOO input on the set. Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the set. 2. How to use ANT OUT OUTPUT SWITCH ANTENNA/
CABLE IN AUDIO
(RGB/DVI) REMOTE CONTROL IN 1 2 DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT I Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.) I Select AA VV 11 input source by using the IINNPPUUTT button on the remote control. L R AUDIO NT IN S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A
NOTE GG The picture quality is improved: compared to normal composite (RCA cable) input. CAUTION GG Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. E X T E R N A L E Q U I P M E N T S E T U P 28 OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and external equipment. Match the jack colors.
(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use I Select AA VV 22 input source by using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN11 input, select AA VV 11 input source. I Operate the corresponding external equipment. Camcorder Video Game Set VIDEO L R 1 B S U Y L N O E C U V R E S 3 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 E X T E R N A L E Q U I P M E N T S E T U P 29 EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15 pin cable 1. How to connect 1 2 Connect the RGB output of the PC to the RR GG BB ((PP CC)) jack on the set. MI/DVI IN Connect the PC audio output to the AAUUDDIIOO
((RRGGBB//DDVVII)) jack on the set. 2. How to use I Turn on the PC and the TV. I Select RRGGBB--PPCC input source by using the IINNPPUUTT button on the remote control. RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN
(CO 2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO 1 2 RGB OUTPUT AUDIO
NOTES GG For LCD TV: To get the the best picture quality, adjust the PC graphics card to 1366x768. GG For Plasma TV: To get the the best picture quality, adjust the PC graphics card to 1360x768. GG Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. GG Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolu-
tion, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. GG Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. GG The synchronization input form for Horizontal and Vertical frequencies is separate. E X T E R N A L E Q U I P M E N T S E T U P 30 When connecting HDMI to DVI cable RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL CABLE IN 1 N I V A HDMI/DVI IN 2 1 (DVI) 2 1 RS-232C IN
(CONTROL & SERVICE) AUDIO OUT Y PB PR L R VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO L
(MONO) AUDIO R 2 1 DVI-PC OUTPUT AUDIO 1. How to connect 1 2 Connect the DVI output of the PC to the HHDDMMII//DDVVII IINN11((DDVVII)) jack on the set. Connect the PC audio output to the AAUUDDIIOO
((RRGGBB//DDVVII)) jack on the set. 2. How to use I Turn on the PC and the TV. I Select HHDDMMII11 input source with using the IINNPPUUTT button on the remote control. E X T E R N A L E Q U I P M E N T S E T U P 31 EXTERNAL EQUIPMENT SETUP Supported Display Specifications (RGB-PC, HDMI-PC) For 26/32/37/42LG30 For 37/42/47/52LG50,32/37/42/47/52LG60 32/42/47/52LG70 Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.468 640x350 31.469 720x400 640x480 800x600 1024x768 1280x768 1360x768 1366x768 31.469 31.469 37.879 48.363 47.776 47.720 47.130 70.08 70.08 59.94 60.31 60.00 59.87 59.799 59.65
* Only RGB-PC mode 70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 720x400 640x480 800x600 1024x768 1280x768 1280x1024 1360x768 1600x1200 1920x1080 RGB-PC 1920x1080 HDMI-PC 66.587 59.934 67.5 60.00
* Only RGB-PC mode
NOTE GG Depending on graphic card and signal status, there can be some shaking to find best picture in a little time. E X T E R N A L E Q U I P M E N T S E T U P 32 For 50/60PG60F For 42/50PG20 Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.468 720x400 640x480 800x600 1024x768 1280x768 1280x1024 1360x768 1600x1200 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 640x350 31.468 720x400 640x480 800x600 1024x768 1280x768 1280x1024 1360x768 1600x1200 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 1920x1080 66.587 59.934 1920x1080 67.5 70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 60.00
* Only RGB-PC mode
NOTE GG Depending on graphic card and signal status, there can be some shaking to find best picture in a little time. E X T E R N A L E Q U I P M E N T S E T U P 33 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution When you change the resolution, select the proper resolution in present input to see the best picture appearance. XGA (1024, 1280, 1360) isnt distinguished because of having the same H/V Sync Time. This function is you to select the Default Sync Time. This feature operates only in RGB-PC mode. PICTURE Move Enter E Advanced Control Picture Reset Screen (RGB-PC) TruMotion Demo SCREEN Move MENU Prev. Resolution G Auto Config. 1024 x 768 1280 x 768 1360 x 768 Position Size Phase Reset Select PPIICCTTUURREE. Select SSCCRREEEENN ((RRGGBB--PPCC)). Select RReessoolluuttiioonn. Select the desired resolution. 1 MENU 2 3 4 5 ENTER ENTER ENTER E X T E R N A L E Q U I P M E N T S E T U P 34 Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. AAuuttoo ccoonnffiigguurree This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. PICTURE Move Enter E Advanced Control Picture Reset Screen (RGB-PC) TruMotion Demo SCREEN Move MENU Prev. Resolution Auto Config. G Position Size Phase Reset Auto config. 1 MENU Select PPIICCTTUURREE. 2 3 4 5 ENTER ENTER Select SSCCRREEEENN ((RRGGBB--PPCC)). Select AAuuttoo CCoonnffiigg... ENTER Select YY ee ss. ENTER Start Auto Configuration. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the PP oo ss ii tt ii oo nn, SS ii zz ee or PPhhaassee. E X T E R N A L E Q U I P M E N T S E T U P 35 PREPARATION Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. PICTURE Move Enter E Advanced Control Picture Reset Screen (RGB-PC) TruMotion Demo SCREEN Move MENU Prev. Resolution Auto Config. Position G Size Phase Reset F D E G Select PPIICCTTUURREE. Select SSCCRREEEENN ((RRGGBB--PPCC)). Select PPoossiittiioonn, SS ii zz ee, or PPhhaassee. Make appropriate adjustments. 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER PPoossiittiioonn: This function is to adjust pic-
ture to left/right and up/down as you prefer. SS ii zz ee: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. The SSiizzee adjustment range is --3300 ~ 3300. PP hh aa ss ee: This function allows you to remove any horizontal noise and clear or sharpen the image of characters. The PPhhaassee adjustment range is --1166 ~ 1166. P R E P A R A T O N I 36 Screen Reset (Reset to original factory values) Returns to the default settings Resolution, Auto Config., Position, Size and Phase at the factory. This feature operates only in RGB-PC mode. PICTURE Move Enter E Advanced Control Picture Reset Screen (RGB-PC) TruMotion Demo SCREEN Move MENU Prev. Resolution Auto Config. Position Size Phase Reset G To Set Select PPIICCTTUURREE. Select SSCCRREEEENN ((RRGGBB--PPCC)). Select RReesseett. Select YY ee ss. 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER P R E P A R A T O N I 37 EXTERNAL EQUIPMENT SETUP USB IN SETUP B S U Y L N O E C U V R E S or 1 3 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 1. How to connect 1 Connect the USB device to the UUSSBB SSEERRVVIICCEE OONNLLYY jack on the side of TV. 2. How to use I After connecting the UUSSBB jack, you use the USB function.
(GG pp..5566) E X T E R N A L E Q U I P M E N T S E T U P 38 AUDIO OUT SETUP Send the TVs audio to external audio equipment via the Audio Output port. Analog 1. How to connect 1 2 Connect audio outputs to the TVs AAUUDDIIOO OOUUTT jacks. Set the TV Speaker option - Off in the AUDIO menu.
(GG pp..8855). See the external audio equipment instruction manual for operation. Digital 1. How to connect 1 2 3 Connect one end of the optical or coaxial cable to the TVs OOPPTTIICCAALL or CCOOAAXXIIAALL (Except **LG30) port of DDIIGGIITTAALL AAUUDDIIOO OOUUTT. Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu. (GG pp..8855). See the external audio equipment instruction manual for operation.
CABLE IN O VI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT R AUDIO S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A 1 L R AUDIO ANTENNA/
CABLE IN AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN 1
(CONTROL & SERVICE) AUDIO OUT
NOTE GG When connecting with external audio equipments, such as ampli-
fiers or speakers, please turn the TV speakers off. (GG pp..8855) L R AUDIO NT IN S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A 2 CAUTION GG Do not look into the optical output port. Looking at the laser beam may damage your vision. GG Block the SPDIF out (optical/coaxial) about the contents with ACP(Audio Copy Protection) function. E X T E R N A L E Q U I P M E N T S E T U P 39 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR.
* If the mode of another product is selected, a button on the remote control which is not used for the selected product can control the TV. TV POWER DVD STB Q. MENU MENU VCR INPUT POWER Turns your TV or any other programmed equipment on or off, depending on the mode. Q.MENU Select the desired quick menu source. GG pp..4433 ENTER MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu. INPUT External input modes rotate in regular sequence VOLUME UP
/DOWN Increase/decrease the sound level. FAV Scroll through the programmed Favorite channels. GG pp..4433 MUTE Switch the sound on or off. GG pp..4422 CHANNEL UP/DOWN PAGE UP/DOWN NUMBER button
(DASH) Select available channels. Move from one full set of screen information to the next one. Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed. VCR/DVD buttons Control video cassette recorders or DVD players. Control USB menu (PHOTO LIST and MUSIC LIST.) Control the SIMPLINK compatible devices. RETURN AV MODE VOL 1 4 7 FAV MUTE 2 5 8 0 CH P A G E 3 6 9 FLASHBK W A T C H I N G T V
C H A N N E L C O N T R O L 40 THUMBSTICK
(Up/Down/Left Right/ENTER) Navigate the on-screen menus and adjust the system settings to your preference. RETURN Allows the user to move return one step in an interactive application or other user interaction function. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SimpLink menu appears at the screen. GG pp..5544--5555 AV MODE It helps you select and set images and sounds when connecting AV devices. GG pp..5533 Installing Batteries I Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). I Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. I Close cover. W A T C H I N G T V
C H A N N E L C O N T R O L 41 WATCHING TV / CHANNEL CONTROL TURNING ON TV 1 2 3 First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the button on the TV or press the PPOOWWEERR, IINNPPUUTT, CCHH((
button on the remote control.
, IINNPPUUTT, CCHH ((DD or EE))
)), NNuummbbeerr ((00~99)) Select the viewing source by using the IINNPPUUTT button on the remote control. I This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the PPOOWWEERR button on the remote control. The TV reverts to standby mode.
NOTE GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet. CHANNEL SELECTION 1 Press the CCHH ((
)) or NNUUMMBBEERR buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 2 3 Press the VVOOLL ((++ or --)) button to adjust the volume. If you want to switch the sound off, press the MMUUTTEE button. You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL ((++ or --)) button. W A T C H I N G T V
C H A N N E L C O N T R O L 42 QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. AAssppeecctt RRaattiioo: Selects your desired picture format. PPoowweerr SSaavviinngg (Only Plasma TV): Adjusts screen brightness to reduce the power consumption of the TV. BB rr ii gg hh tt nn ee ss ss (Only LCD TV): Adjusts screen brightness. It returns to the default settings bright-
ness by changing mode source. CClleeaarr VVooiiccee: By differentiating the human sound range from others, it helps users listen to human voices better. PPiiccttuurree MMooddee: Selects the factory preset picture depend on the viewing environment. SSoouunndd MMooddee: Selects the factory preset sound for type of program. CCaappttiioonn: Select a closed caption. MMuullttii AAuuddiioo: Selects MTS sound (Analog signal) or changes the audio language (Digital signal). SSlleeeepp TTiimmeerr: Select the amount of time before your TV turns off automatically. DDeell//AAdddd//FFaavv: Select channel you want to add or delete or add the channel to the Favorite List. UUSSBB EEjjeecctt: Select USB Eject in order to eject USB device. Plasma TV Q-Menu LCD TV Q-Menu Aspect Ratio FF 16:9 GG Aspect Ratio FF 16:9 GG Power Saving Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 3 Off Vivid Standard Off English Off Add Eject Brightness Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 3 Off Vivid Standard Off English Off Add Eject Close Close Only for 50/60PG60F Only for 32/37/42/47/52LG50/60/70 1Q. MENU 2 3Q. MENU Display each menu. Make appropriate adjustments. Return to TV viewing W A T C H I N G T V
C H A N N E L C O N T R O L 43 WATCHING TV /CHANNEL CONTROL INITIAL SETTING This OSD (On Screen Display) is displayed automatically on the screen as figure after turning on the TV and you can adjust the Location, Time, Language, Auto tuning. Step1. Mode setting Step1. Mode Setting It sets a use environment. Select the set where mode. In-Store Home Enter RETURN Exit Select HHoommee MMooddee. 1 2 ENTER Step2. Time setting Step2. Time Setting Current Time Setting FF Auto GG Year Month Date Hour Minute Time Zone Daylight Saving 2007 11 15 5 PM 52 Eastern Off Enter RETURN Exit Select AAuuttoo or MMaannuuaall. Select desired time option. 1 2 3 ENTER W A T C H I N G T V
C H A N N E L C O N T R O L 44 Step3. Option setting Step3. Option Setting 1. OSD Language Setting FF English GG 2. Audio Language Setting French Enter RETURN Exit Step4. Auto Tuning Step4. Auto Tuning Auto Tuning can change channel map. Do you want to start Auto Tuning?
Enter Enter RETURN Exit Select OOSSDD LLaanngguuaaggee SSeettttiinngg or AAuuddiioo LLaanngguuaaggee SSeettttiinngg. Select your desired language. 1 2 3 ENTER 1 ENTER Start AAuuttoo TTuunniinngg.
NOTE You can also adjust IInniittiiaall SSeettttiinngg in the OOPPTTIIOONN menu. OPTION E Initial Setting Move Enter 1 MENU 2 3 ENTER ENTER Select OOPPTTIIOONN. Select IInniittiiaall SSeettttiinngg. W A T C H I N G T V
C H A N N E L C O N T R O L 45 WATCHING TV /CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
* Only 32/37/42/47/52LG50/60/70, 50/60PG60F CHANNEL Move Enter PICTURE Move Enter Auto Tuning Manual Tuning Channel Edit Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 50 50 50 50 50 0 R G AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 R L
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID E Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 CHANNEL PICTURE AUDIO TIME OPTION LOCK INPUT USB TIME Move Enter
: DC/9/ 2007 02:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off LOCK Move Enter INPUT Move Enter USB Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada Antenna Cable AV1 AV2 Component1 Component2 RGB-PC HDMI1 E PHOTO LIST MUSIC LIST 1 MENU Display each menu. 2 3 ENTER Select a menu item. ENTER Enter to the pop up menu. 4 MENU Return to TV viewing
NOTE GG IISSMM MMeetthhoodd, PPoowweerr SSaavviinngg: Only PPllaassmmaa TTVV. GG BBaacckklliigghhtt: Only LLCCDD TTVV. GG TTrruuMMoottiioonn DDeemmoo: Only 3322//3377//4422//4477//5522LLGG6600//7700. GG PPoowweerr IInnddiiccaattoorr: Only 3322//3377//4422//4477//5522LLGG6600. W A T C H I N G T V
C H A N N E L C O N T R O L 46 Only 26/32/37/42LG30, 42/50/PG10/20 CHANNEL Move Enter PICTURE Move Enter AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 50 50 50 50 50 0 R G CHANNEL PICTURE AUDIO TIME OPTION LOCK Auto Tuning Manual Tuning Channel Edit TIME Move Enter
: DC/9/ 2007 02:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 E 1 MENU Display each menu. 2 3 ENTER Select a menu item. ENTER Enter to the pop up menu. 4 MENU Return to TV viewing R W A T C H I N G T V
C H A N N E L C O N T R O L 47 LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada NOTE GG IISSMM MMeetthhoodd, PPoowweerr SSaavviinngg: Only PPllaassmmaa TTVV. GG BBaacckklliigghhtt: Only LLCCDD TTVV. WATCHING TV /CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit Press Yes button to begin auto tuning. Yes No 1 MENU Select CCHHAANNNNEELL. 2 3 4 ENTER ENTER Select AAuuttoo TTuunniinngg. Select YY ee ss. ENTER Run AAuuttoo ttuunniinngg. 5RETURN MENU Return to the previous menu. Return to TV viewing I A password is required to gain access to Auto Tuning menu if the Lock System is turned on. W A T C H I N G T V
C H A N N E L C O N T R O L 48 Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter FF DTV GG Select channel type and RF-channel number. Channel DTV 2-0 2 Bad Normal Good Delete Close 1 MENU ENTER ENTER 2 3 4 5 6RETURN MENU Select CCHHAANNNNEELL. Select MMaannuuaall TTuunniinngg. Select DD TT VV, TT VV, CCAADDTTVV, or CC AA TT VV. Select channel you want to add or delete. ENTER Select AA dd dd or DDeelleettee. Return to the previous menu. Return to TV viewing I A password is required to gain access to Manual Tuning menu if the Lock System is turned on. W A T C H I N G T V
C H A N N E L C O N T R O L 49 WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Channel Editing From the default channel list created from the Auto Tuning channel search, you can create two different types of channel lists in memory: custom list and favorite channel list. A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-
left corner of the screen. Add/Delete Navigate CH Move Page MENU Previous RETURN Exit W A T C H I N G T V
C H A N N E L C O N T R O L 50 Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit 1 MENU Select CCHHAANNNNEELL. 2 3 4 ENTER Select CChhaannnneell EEddiitt. ENTER ENTER Select a channel. Select channel you want to add or delete. 5 MENU Return to the previous menu. RETURN Return to TV viewing
1 | User manual 2of2 | Users Manual | 2.79 MiB |
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Input List Antenna Cable AV1 AV2 Component1 1 INPUT ENTER Select the desired input source. Antenna Cable AV1 AV2 Component1 Component2 HDMI4 HDMI3 HDMI2 HDMI1 RGB-PC Except 26/32/37/42/47/52LG30/50, 42/50PG10/20 I You can also select the desired input source in the IINNPPUUTT menu (Only 32/37/42/47/52LG50/60/70, 50/60PG60F). Move Enter INPUT Antenna Cable AV1 AV2 Component1 Component2 RGB-PC HDMI1 E I AAnntteennnnaa: Select it when watching the DTV/TV. I CC aa bb ll ee: Select it when watching the CADTV/CATV. I AAVV 11--22: Select it when watching the VCR or external equipment. I CCoommppoonneenntt 11--22: Select it when using the DVD or the Digital set-top box depend on connector. I RR GG BB -- PP CC: Select it when using PC depend on connector. I HHDDMMII11--44: Select it when using DVD, PC or Digital set-top box depend on con-
nector. W A T C H I N G T V
C H A N N E L C O N T R O L 51 WATCHING TV / CHANNEL CONTROL INPUT LABEL Sets a label to each input source which is not in use. FF GG Move Enter
: English AV1
: On
: Off
: Off AV2 Component1 Component2 RGB-PC
: Level 0
: 1 HDMI1 HDMI2 EE HDMI3 HDMI4 Close Only for 32/37/42/47/52LG60/70, 50/60PG60F OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 EE OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select OOPPTTIIOONN. Select IInnppuutt LLaabbeell. Select the source. Select the label. Return to the previous menu. Return to TV viewing W A T C H I N G T V
C H A N N E L C O N T R O L 52 AV MODE You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Game Sport Press the AAVV MMOODDEE button repeatedly to select the desired source. Return to the previous menu. Return to TV viewing I If you select CCiinneemmaa in AV mode, CCiinneemmaa will be selected both for PIC-
TURE menu - Picture Mode and AUDIO menu - Sound Mode respectively. I If you select OO ff ff in AV mode, the pic-
ture and image which you initially set will be selected. 1AV MODE 2 ENTER 3RETURN MENU W A T C H I N G T V
C H A N N E L C O N T R O L 53 WATCHING TV / CHANNEL CONTROL This function operates only with devices with the This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you require the SIMPLINK menu, select OO nn. SIMPLINK function is not supported by HDMI IN 4 input source. logo. Please check the logo. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 E OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English Off On
: On
: Off
: Off
: Level 0
: 1 E 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OOPPTTIIOONN. Select SSIIMMPPLLIINNKK. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing
NOTE GG Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIM-
PLINK device with the HDMI cable. GG After connecting the HDMI terminal for the home theater with the SIMPLINK function using the above method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN ter-
minal on the back of the SIMPLINK device with the OPTICAL cable. GG When you switch the Input source with the INPUT button on the remote control, you can stop the opera-
tion of device controlled by SIMPLINK. GG When you select or operate the media device with home theater function, the speaker automatically switch-
es to home theater speaker (HT speaker). GG When you execute PHOTO LIST, MUSIC LIST function during DVD playback included in home theater sup-
ported the SimpLink stops and the applicable function is executed after switching the input to TV. (This feature is not available for alll models). W A T C H I N G T V
C H A N N E L C O N T R O L 54 SimpLink Functions I DDiirreecctt PPllaayy:: After connecting AV devices to the TV, you can directly control the devices and play media with-
out additional settings. I SSeelleecctt AAVV ddeevviiccee:: Enables you to select one of the AV devices connected to TV and play it. I DDiisscc ppllaayybbaacckk:: Control connected AV devices by pressing the
, ENTER, G, A, ll ll, FF and GG buttons.
(The button does not provide such functions.) buttons for play, stop, pause, fast reverse, fast forward, chapter skip. I PPoowweerr ooffff aallll ddeevviicceess:: When you power off the TV, all connected devices are turned off. I SSwwiittcchh aauuddiioo--oouutt:: Offers an easy way to switch audio-out. I SSyynncc PPoowweerr oonn:: When you play the connected AV device, TV will automatically turn on.
(A device, which is connected to the TV through a HDMI cable but does not support SimpLink, does not provide this function) Note: To operate SIMPLINK, the HDMI cable over 1.2 Version with *CEC function should be used. (*CEC: Consumer Electronics Control). SIMPLINK TV Display SSIIMMPPLLIINNKK menu. ENTER Select the desired device. 1 2 3 ENTER Control connected AV devices. SimpLink Menu 1 2 3 4 5 TTVV vviieewwiinngg: Switch to the previous TV channel regardless of the current mode. DDIISSCC ppllaayybbaacckk: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VVCCRR ppllaayybbaacckk: Control the connected VCR. HHDDDD RReeccoorrddiinnggss ppllaayybbaacckk: Control recordings stored in HDD. AAuuddiioo OOuutt ttoo HHoommee TThheeaatteerr ssppeeaakk--
eerr//AAuuddiioo OOuutt ttoo TTVV: Select Home Theater speaker or TV speaker for Audio Out. 1 2 3 4 5 GG Selected Device GG When no device is connected
(displayed in gray) GG When a device is connected
(displayed in bright color) W A T C H I N G T V
C H A N N E L C O N T R O L 55 USB I This feature is only for 32/37/42/47/52LG50/60/70, 50/60PG60F. ENTRY MODES When you connect a USB device, this screen is displayed, automatically. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the UUSSBB IINN jacks on the side of TV. B S U Y L N O E C U V R E S It doesnt support USB HDD This TV Supports on JPEG and MP3. When removing the USB device Select the USB EJECT menu before removing the USB device. Select PPHHOOTTOO LLIISSTT or MMUUSSIICC LL II SS TT PHOTO LIST MUSIC LIST 1Q. MENU 2 ENTER Select UUSSBB EEjjeecctt. 3 N I I M M E D I A H O S T 2 3 ENTER Precautions when using the USB device GG Only a USB storage device is recognizable. GG If the USB storage device is connected through a USB hub, the device is not recognizable. GG A USB storage device using an automatic recogni-
tion program may not be recognized. GG A USB storage device which uses its own driver may not be recognized. GG In case of a card reader, up to four memory cards are concurrently recognizable. GG The recognition speed of a USB storage device may depend on each device. GG Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. GG Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files. GG Please use only a USB storage device which was formatted as a FAT32 file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. GG Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. GG Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. GG Some USB storage devices may not be supported or operated smoothly. GG If the name of a folder or file is too long, it will not be displayed or recognized. GG Please backup the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage. 56 PHOTO LIST Its available to playback the photo file(*.jpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. PHOTO (*.JPEG) supporting file Baseline: width<=15360, height<=8640 You can play JPEG files only. Only baseline scan is supported among JPEG. Non-supported files are displayed in the form of icon? Bitmap?. Screen Components 1 MENU 2 Select UU SS BB. ENTER ENTER Select PPhhoottoo LLiisstt. 1 2 3 4 5 6 Moves to upper level file Preview: Display the thumbnail/folder name of the photo at the selected folder Current page/Total pages Total number of marked photos Usable USB memory Corresponding buttons on the remote control 2 1 3 4 5 USB Device Free Space 150MB Page 2/3 No Marked My Father Mulan Star 1 PHOTO LIST OST My Father 1366x768, 125KB Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit 6 M E D I A H O S T 57 USB Photo Selection and PopUp Menu PHOTO LIST OST My Father Page 2/3 No Marked My Father Mulan Star USB Device Free Space 150MB 1366x768, 125KB Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit PHOTO LIST Page 2/3 No Marked USB Device Free Space 150MB OST GanSik 1366x768, 125KB Upper OST Photo X.Box 1366x768, 125KB View Mark All Delete Cancel Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit When you select a file (not folder), this PopUp menu is displayed. GG VViieeww: Display the selected item. GG MMaarrkk AAllll: Mark all photos on the screen. GG UUnnmmaarrkk AAllll: Deselect all marked photos. GG DDeelleettee: Delete the selected photo item. GG CCaanncceell: Close the pop-up menu. 1 2 3 4 ENTER ENTER Select the target folder or drive. Select the desired photos. Show the PopUp menu. ENTER Select the desired PopUp menu. 5 RETURN Return to TV viewing Use the CC HH photo page. button to navigation in the Use the FFAAVV button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show. M E D I A H O S T 58 Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. PHOTO LIST OST My Father Page 2/3 No Marked My Father Mulan Star USB Device Free Space 150MB 1366x768, 125KB Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit PHOTO LIST Page 2/3 No Marked USB Device Free Space 150MB OST GanSik 1366x768, 125KB Upper OST Photo X.Box 1366x768, 125KB View Mark All Delete Cancel 1/17 Slideshow BGM Delete Option Hide Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. 1 2 3 4 5 ENTER ENTER Select the target folder or drive. Select the desired photos. show the PopUp menu. Select VV ii ee ww ENTER The selected photo is displayed in full size. Use the CC HH photo page. button to navigation in the M E D I A H O S T 59 USB M E D I A H O S T 60 6 ENTER Select the SSlliiddeesshhooww, BBGGMM, DDeelleettee, OOppttiioonn, or HHiiddee..
((RRoottaattee)), 1/17 Slideshow BGM Delete Option Hide Use button to select the previous or next photo. Use button to select and control the menu on the full-sized screen. GG SSlliiddeesshhooww : When no picture is selected, all photos in the current folder are displayed during slide show. When selected, the selected photos are displayed dur-
ing slide show. I Set the time interval of the slide show in OOppttiioonn. GG BB GG MM : Listen to music while viewing photos in full size. I Set the BGM device and album in OOppttiioonn. GG
((RRoottaattee)) : Rotate photos. I Rotates the photo 90, 180, 270, 360 clockwise. I A slide show continues for a maximum of 4 hours. After 4 hours, the slide show will end and go to TV mode or external input mode. GG DDeelleettee : Delete photos. GG OOppttiioonn : Set values for SSlliiddee SSppeeeedd and MMuussiicc Press FF GG to set the time interval between slides. Slide Speed Music Folder ENTER Fast Music Cancel FFoollddeerr. I Use Then go to tings. button and EENNTTEERR button to set values. and press EENNTTEERR to save the set-
I You cannot change MMuussiicc FFoollddeerr while BGM is playing. GG HHiiddee : Hide the menu on the full-sized screen. I To see the menu again on the full-sized screen, press EENNTTEERR button to display. NOTE
GG If it is Progressive JPEG format, some photos may be not decorded. MUSIC LIST Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be support-
ed by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV opera-
tion. MUSIC(*.MP3) supporting file Bitrate range 8? 40?Kbps ~ 320Kbps Sampling rate MPEG1 : 32000, 44100, 48000Hz MPEG2 : 16000, 24000, 22050Hz MPEG2.5 : 8000, 11025, 12000Hz Screen Components 1 MENU 2 Select UU SS BB. ENTER ENTER Select MMuussiicc LLiisstt. 1 2 3 4 5 6 Moves to upper level file Preview: If any album jacket for the file exists, this jack-
et is displayed. Current page/Total pages Total number of marked musics Usable USB memory Corresponding buttons on the remote control 2 1 3 4 5 MUSIC LIST Music Page 2/3 No Marked Title Upper USB Device Free Space 150MB Play Time 1:340, 120KB Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit 6 2 While the music file is being played, the information section does not show the selected file, but the playing file name and the play time information at the bottom. M E D I A H O S T 61 Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. MUSIC LIST Page 2/3 No Marked Music Title Up Folder USB Device Free Space 150MB Play Time 1:340, 120KB Upper Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit MUSIC LIST Page 2/3 No Marked Music Title Up Folder 1:340, 120KB Upper USB Device Free Space 150MB Play Time 4395KB 1Kbps Play Play with Photo Mark All Delete Cancel Navigate PopUp Menu CH Move Page FAV Mark RETURN Exit GG PPllaayy (During stop): Play the selected musics. Once a music finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current fold-
er will be played. If you go to a different folder and press the EENNTTEERR button, the current music in playback will stop. GG PPllaayy MMaarrkkeedd : Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. GG SSttoopp PPllaayy (During playback) : Stop the play-
ing musics. GG PPllaayy wwiitthh PPhhoottoo : Start playing the selected musics and then move to the Photo List. GG MMaarrkk AAllll : Mark all musics in the folder. GG UUnnmmaarrkk AAllll : Deselect all marked musics. GG DDeelleettee : Delete the selected musics. GG CCaanncceell : Close the pop-up menu. 1 2 3 4 ENTER ENTER Select the target folder or drive. 5RETURN Return to TV viewing Select the desired musics. Show the PopUp menu. ENTER Select the desired PopUp menu. Use the CC HH muisc page. button to navigation in the Use FF AA VV button to mark or unmark a music. When one or more music files are marked, the marked musics will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence. M E D I A H O S T 62 I If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. I The Screen Saver?
Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
NOTE GG When music is playing, GG A damaged or corrupted music does not play but displays 00:00 in playtime. GG A music downloaded from a paid service with copyright protection does not start but displays inappropri-
is displayed in front of the music play time. ate information in playtime. GG If you press EENNTTEERR, AA buttons, screen saver is stopped. GG The PPLLAAYY((GG)), PPaauussee((IIII)), AA buttons on the remote control are also available in this mode. GG Its not available to play MP3 file under 16Kbyte. M E D I A H O S T 63 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. I RGB-PC input source use 4:3 or 16:9 aspect ratio.
NOTE GG If a fixed image is displayed on the screen for a long time, the image may become imprinted on the screen and remain visible. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. PICTURE Move Enter PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R Set By Program 4:3 16:9 Zoom1 Zoom2 Just Scan G I You can also adjust AAssppeecctt RRaattiioo in the QQ--MMeennuu. Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Select PPIICCTTUURREE. Select AAssppeecctt RRaattiioo. Select the desired picture format. Return to the previous menu. Return to TV viewing 1 MENU 2 3 ENTER ENTER 4RETURN MENU P I C T U R E C O N T R O L 64 Set by program Selects the proper picture proportion to match the sources image.
(4:3 4:3) Zoom 1 Choose Zoom 1 when you want to view the pic-
ture without any alteration. However, the top and bottom portions of the picture will be cropped.
(16:9 16:9) Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. 16:9 Adjust the picture horizontally, in a linear pro-
portion to fill the entire screen. Just Scan Following selection will lead to you view the pic-
ture of best quality without loss of original pic-
ture in high resolution image. Notes: If there are noise in original picture, you can see the noise at the edge. JJuusstt SSccaann operates only in DTV/CADTV
(720p/1080i/1080p), HDMI-DTV, DVI-
DTV input source. P I C T U R E C O N T R O L 65 PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. PICTURE Move Enter PICTURE Aspect Ratio : 16:9 Picture Mode : Standard Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Backlight Contrast Brightness Sharpness Color Tint E Move Enter Intelligent Sensor Vivid Standard Cinema Sport Game Expert1 Expert2 G 80 90 50 60 60 0 R 1 MENU Select PPIICCTTUURREE. 2 3 ENTER Select PPiiccttuurree MMooddee. ENTER Select IInntteelllliiggeenntt SSeennssoorr (Only 26/32/37/42/47/52LG50/60/70), VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, or GGaammee. 4RETURN MENU Return to the previous menu. Return to TV viewing I IInntteelllliiggeenntt SSeennssoorr, DD yy nn aa mm ii cc, SSttaannddaarrdd, MMiilldd Settings are preset for the optimum picture quality at the facto-
ry and are not adjustable. I When selecting IInntteelllliiggeenntt SSeennssoorr
(Only 26/32/37/42/47/52LG50/60/70), the most suitable picture is automatically adjusted according to the surrounding conditions. I You can also adjust PPiiccttuurree MMooddee in the QQ.. MMeennuu. P I C T U R E C O N T R O L 66 Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. To initialize values (reset to default settings), select the Cool option. PICTURE Move Enter PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset Screen (RGB-PC) TruMotion Demo Screen (RGB-PC) TruMotion Demo Color Temperature FF Medium GG Fresh Contrast Fresh Color R Noise Reduction G Gamma Black Level Eye Care Film Mode TruMotion Off Off Auto Medium Low Off Off High Close 1 MENU 2 ENTER Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. ENTER Select CCoolloorr TTeemmppeerraattuurree. 3 4 Select CC oo oo ll, MMeeddiiuumm, or WW aa rr mm. 5RETURN MENU Return to the previous menu. Return to TV viewing P I C T U R E C O N T R O L 67 PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. This feature is disable in PPiiccttuurree MMooddee--IInntteelllliiggeenntt SSeennssoorr. Backlight EE 80 EE EE EE Enter PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Select PPIICCTTUURREE. Select PPiiccttuurree MMooddee. Select VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, or GGaammee. Select BBaacckklliigghhtt (Only LCD TV), CCoonnttrraasstt, BBrriigghhttnneessss, SShhaarrppnneessss, CCoolloorr, or TT ii nn tt. Make appropriate adjustments. Return to the previous menu. Return to TV viewing 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER 6RETURN MENU P I C T U R E C O N T R O L 68 Picture Mode - Expert Control By segmenting categories, EExxppeerrtt11 and EExxppeerrtt22 provide more categories which users can set as they see fit, offering the optimal picture quality for users. PICTURE Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E Move Enter Intelligent Sensor Vivid Standard Cinema Sport Game Expert1 Expert2 G 80 90 50 60 60 0 R 1 MENU ENTER ENTER ENTER ENTER 2 3 4 5 6 7RETURN MENU Select PPIICCTTUURREE. Select PPiiccttuurree MMooddee. Select EExxppeerrtt11 or EExxppeerrtt22. Select EExxppeerrtt CCoonnttrrooll. Select your desired menu option. Make appropriate adjustments. Return to the previous menu. Return to TV viewing PICTURE Move Enter E Brightness Sharpness Color Tint Expert Control Reset Black Level Fresh Contrast 50 60 60 Noise Reduction 0 Film Mode G R Screen (RGB-PC) TruMotion Demo Color Standard Gamma White Balance Red Gain Green Gain Blue Gain Red Offset E FF Off GG Low Off Off SD Medium 2 Point 128 128 128 64 P I C T U R E C O N T R O L 69 PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images. PICTURE Move Enter PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset Screen (RGB-PC) TruMotion Demo Screen (RGB-PC) TruMotion Demo Color Temperature Medium Fresh Contrast FF Off GG Fresh Color R G Noise Reduction Gamma Black Level Eye Care Film Mode TruMotion Off Auto Medium Low Off Off High Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. Select FFrreesshh CCoonnttrraasstt, FFrreesshh CCoolloorr, NNooiissee RReedduuccttiioonn, or GGaammmmaa. Select your desired options. Return to the previous menu. Return to TV viewing P I C T U R E C O N T R O L 70 ADVANCED - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV1-2, Component, or HDMI1-3 (or 4) mode. PICTURE Move Enter PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset Screen (RGB-PC) TruMotion Demo Screen (RGB-PC) TruMotion Demo Color Temperature Medium Fresh Contrast Fresh Color R G Noise Reduction Gamma Black Level Eye Care Film Mode TruMotion Off Off Auto Medium FF Low GG Off Off High Close Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. I HH ii gg hh: The reflection of the screen gets I LL oo ww: The r:flection of the screen gets darker. brighter. I AAuuttoo: Realizing the black level of the screen and set it to High or Low auto-
matically. Select BBllaacckk LLeevveell. Select LL oo ww or HH ii gg hh. Return to the previous menu. Return to TV viewing 1 MENU ENTER ENTER 2 3 4 5RETURN MENU P I C T U R E C O N T R O L 71 PICTURE CONTROL ADVANCED - EYE CARE - Only LCD TV It helps you adjust brightness when the screen is too bright to prevent dazzling. PICTURE Move Enter PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset Screen (RGB-PC) TruMotion Demo Screen (RGB-PC) TruMotion Demo Color Temperature Medium Fresh Contrast Fresh Color R Noise Reduction G Gamma Black Level Eye Care Film Mode TruMotion Off Off Auto Medium Low FF Off GG Auto High Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. Select EEyyee CCaarree. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing P I C T U R E C O N T R O L 72 ADVANCED - FILM MODE Set up the TV for the best picture appearance for viewing movies. When you operate Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode. PICTURE Move Enter PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset Screen (RGB-PC) TruMotion Demo Screen (RGB-PC) TruMotion Demo Color Temperature Medium Fresh Contrast Fresh Color R G Noise Reduction Gamma Black Level Eye Care Film Mode TruMotion Off Off Auto Medium Low Off FF Off GG High Close 1 MENU Select PPIICCTTUURREE. ENTER Select AAddvvaanncceedd CCoonnttrrooll. ENTER Select FFiillmm MMooddee. 2 3 4 Select OO nn or OO ff ff. 5RETURN MENU Return to the previous menu. Return to TV viewing P I C T U R E C O N T R O L 73 PICTURE CONTROL ADVANCED - TRUMOTION - Only 32/37/42/47/52LG60/70 It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. This feature is disable in RGB-PC, HDMI (PC) mode. PICTURE Move Enter PICTURE E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset Color Temperature Fresh Contrast Fresh Color R Noise Reduction G Gamma Screen (RGB-PC) TruMotion Demo Screen (RGB-PC) TruMotion Demo Black Level Eye Care Film Mode TruMotion Medium Off Off Auto Medium Low Off Auto FF High GG Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. Select TTrruuMMoottiioonn. Select OO ff ff, LL oo ww, or HH ii gg hh. Return to the previous menu. Return to TV viewing I LL oo ww: Set amount of film judder to low. I HH ii gg hh: Set amount of film judder to high. P I C T U R E C O N T R O L 74 TRUMOTION DEMO - Only 32/37/42/47/52LG60/70 Use it to see the difference between TruMotion Demo on and TruMotion Demo off. Its not available to use this function in RGB-PC, HDMI (PC) mode. PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo TruMotion On TruMotion Off 1 MENU 2 3 ENTER ENTER 4 MENU Select PPIICCTTUURREE. Select TTrruuMMoottiioonn DDeemmoo. Select TTrruuMMoottiioonn OOnn or OO ff ff .. Stop TTrruuMMoottiioonn. P I C T U R E C O N T R O L 75 PICTURE CONTROL PICTURE RESET Use to quickly reset all the Picture menu options to their original factory preset values.??
Settings of the selected picture modes return to the default factory settings.??
PICTURE Move Enter PICTURE E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset ii R G Resetting video configuration... Screen (RGB-PC) TruMotion Demo Screen (RGB-PC) TruMotion Demo 1 MENU 2 3 ENTER ENTER 4 MENU Select PPIICCTTUURREE. Select RReesseett. Initialize the adjusted value. Return to TV viewing P I C T U R E C O N T R O L 76 POWER INDICATOR It helps you adjust the brightness of moving LED and sound when power is turned on. OPTION Move Enter E OPTION Move Enter E Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Power Indicator
: On
: Off
: Off
: Level 0
: 1 Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Power Indicator
: On
: Off
: Off
: Level 0
: 1 Srartup Sound FF On GG Standby Light Power Light Demo Mode On On Off Close Only 32/37/42/47/52LG60/70 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select OOPPTTIIOONN. Select PPoowweerr IInnddiiccaattoorr. Select SS rr aa rr tt uu pp SS oo uu nn dd, SS tt aa nn dd bb yy LLiigghhtt, PPoowweerr LLiigghhtt or DDeemmoo MMooddee. ENTER Select your desired options. Return to the previous menu. Return to TV viewing I SSrraarrttuupp SSoouunndd:
If you select On, there will be a start up sound. I SSttaannddbbyy LLiigghhtt: If you select On, the Power Button LED will turn red in Stand By mode. I PPoowweerr LLiigghhtt:
If you select On, the screen will turn on and the brightness will go down 50%. If you switch off, White LED will gradually dim out and Red LED will turn on. I DDeemmoo MMooddee: It shows how power on/off lighting works. Red LED gradually fades into White LED and White LED gradually fades into Red LED. P I C T U R E C O N T R O L 77 PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD - Only Plasma TV A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image. Use our unique method to minimize any fixed image on the screen. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 EE Select OOPPTTIIOONN. Select IISSMM MMeetthhoodd. Select NNoorrmmaall,, OOrrbbiitteerr,, IInnvveerrssiioonn or WWhhiittee wwaasshh.. Return to the previous menu. Return to TV viewing 1 MENU 2 3 ENTER ENTER 4RETURN MENU P I C T U R E C O N T R O L 78 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID EE Move Enter
: English
: On
: Off
: Off Normal Orbiter Inversion White wash
: Level 0
: 1 I NNoorrmmaall: If image sticking is never a problem, ISM is not necessary - set to Normal. I OO rr bb ii tt ee rr: Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a ghost image on the screen, the image will move every 2 min-
utes. I IInnvveerrssiioonn: Inversion will automatically invert the plasma display panel color every 30 minutes. I WW hh ii tt ee WW aa ss hh: White Wash removes ghost images from the screen. Use spar-
ingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own. NOTE
GG An excessive ghosted image may be impossible to clear entirely with White Wash. To return to nor-
mal viewing, press the any button. POWER SAVING PICTURE MODE - Only Plasma TV Low power reduces the plasma display power consumption. Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 Level 0 Level 1 Level 2 Level 3 Level 4 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 EE OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID EE Select OOPPTTIIOONN. Select PPoowweerr SSaavviinngg. Select LLeevveell 00, LLeevveell 11, LLeevveell 22, LLeevveell 33, or LLeevveell 44. Return to the previous menu. Return to TV viewing I Level 0 is the brightest. I You can also adjust PPoowweerr SSaavviinngg in the QQ.. MMeennuu. 1 MENU 2 3 ENTER ENTER 4RETURN MENU P I C T U R E C O N T R O L 79 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELLER (AUTO VOLUME) Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter Off On 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 1 MENU Select AAUUDDIIOO. 2 3 ENTER Select AAuuttoo VVoolluummee. ENTER Select OO nn or OO ff ff. 4RETURN MENU Return to the previous menu. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 80 PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, and GG aa mm ee are preset for optimum sound quality at the factory and are not adjustable. AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E Standard Music Cinema Sport Game 50 50 1 MENU Select AAUUDDIIOO. 2 3 ENTER Select SSoouunndd MMooddee. ENTER Select SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, or GGaammee. 4RETURN MENU Return to the previous menu. Return to TV viewing I You can also adjust SSoouunndd MMooddee in the QQ.. MMeennuu. S O U N D
L A N G U A G E C O N T R O L 81 SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter
: Off
: On 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 1 MENU 2 ENTER 3 ENTER 4 ENTER Select AAUUDDIIOO. Select SSoouunndd MMooddee. Select SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, or GGaammee. Select TTrreebbllee or BB aass ss. SRS TRUSURROUND XT 1 MENU Select AAUUDDIIOO. 2 3 ENTER ENTER 4RETURN MENU Select SSRRSS TTrruuSSuurrrroouunndd XXTT Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 82 AUDIO Auto Volume Clear Voice Balance Sound Mode 5 6RETURN MENU
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Treble Bass SRS TruSurround XT Off EE EE 50 50 Close Make appropriate adjustments. Return to the previous menu. Return to TV viewing I SSRRSS TTrruuSSuurrrroouunndd XXTT: Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material. CLEAR VOICE By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter Off On 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 1 MENU Select AAUUDDIIOO. 2 3 ENTER Select CClleeaarr VVooiiccee. ENTER Select OO nn or OO ff ff. 4RETURN MENU Return to the previous menu. Return to TV viewing I If you select CClleeaarr VVooiiccee--OOnn, SS RR SS TT rr uu SS uu rr rr oo uu nn dd XX TT feature will not work. I You can also adjust CClleeaarr VVooiiccee in the QQ--MMeennuu. S O U N D
L A N G U A G E C O N T R O L 83 SOUND &LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter
: Off
: On 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter
: Off
: On 0 L Balance 0 R EE L R EE
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Close 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select AAUUDDIIOO. Select BBaallaannccee. Make appropriate adjustments. Return to the previous menu. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 84 TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. AUDIO Clear Voice Balance Sound Mode TV Speaker E
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset
: On 50 50 AUDIO Clear Voice Balance Sound Mode TV Speaker E
: On Move Enter Off On R 0 L
: Standard SRS TruSurround XT: Off Treble Bass Reset
: On 50 50 1 MENU Select AAUUDDIIOO. 2 3 ENTER Select TTVV SSppeeaakkeerr. ENTER Select OO nn or OO ff ff. 4RETURN MENU Return to the previous menu. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 85 SOUND &LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings.
: Off
: On Move Enter 0 L R Resetting audio configuration... ii
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter
: Off
: On 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode 1 MENU 2 3 ENTER ENTER 4 MENU Select AAUUDDIIOO. Select RReesseett. Initialize the adjusted value. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 86 STEREO/SAP BROADCAST SETUP This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting. Stereo or SAP can be received in Analog channel. Q-Menu Aspect Ratio Brightness Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 16:9 3 Off Vivid Standard Off FF English GG Off Add Eject Close Analog Broadcasting System Digital Broadcasting System 1Q. MENU 2 3 Q. MENU Select SS AA PP. Select MMoonnoo, SStteerreeoo, or SS AA PP. Return to TV viewing 1Q. MENU 2 3 Q. MENU Select MMuullttii AAuuddiioo. Select other languages. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 87 SOUND &LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 E OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English Menu Audio
: On
: Off
: Off
: Level 0
: 1 E English FF English GG Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select OOPPTTIIOONN. Select LLaanngguuaaggee. Select AAuuddiioo. Select your desired language:
EEnngglliisshh, SSppaanniisshh, or FFrreenncchh Return to the previous menu. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 88 ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 E OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English Menu FF English GG Audio English Close
: On
: Off
: Off
: Level 0
: 1 E 1 MENU Select OOPPTTIIOONN. 2 3 4 ENTER Select LLaanngguuaaggee. ENTER Select MMeennuu. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. 5RETURN MENU Return to the previous menu. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 89 SOUND &LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays infor-
mation at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memoririze the caption/text mode which was last set when you turn the power off. This function is only available when CCaappttiioonn Mode is set OO nn. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 E Select OOPPTTIIOONN. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off FF Mode On GG CC1
: Level 0
: 1 E Digital Option Close I When selecting OO ff ff, Sub-menus for Analog, DTV, and Digital Option become disabled. Select CCaappttiioonn I CCAAPPTTIIOONN Select OO nn. Select CC CC 11-44 or TTeexxtt11-44. Return to the previous menu. Return to TV viewing The term for the words that scroll across the bottom of the TV screen;
usually the audio portion of the pro-
gram provided for the hearing impaired. I TT EE XX TT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provid-
ed by the broadcaster. I You can also adjust AAssppeecctt RRaattiioo in the QQ--MMeennuu. 1 MENU ENTER ENTER 2 3 4 5RETURN MENU S O U N D
L A N G U A G E C O N T R O L 90 Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off FF Mode On GG CC1
: Level 0
: 1 E Digital Option Close OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 E Select OOPPTTIIOONN. Select CCaappttiioonn Select OO nn. Select CC CC 11-44, TTeexxtt11-44, or SSeerrvviiccee11 - 66. Return to the previous menu. Return to TV viewing 1 MENU ENTER ENTER 2 3 4 5RETURN MENU S O U N D
L A N G U A G E C O N T R O L 91 SOUND &LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 E OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID 1 MENU Select OOPPTTIIOONN. Move Enter
: English
: On
: Off
: Off FF Mode On GG Service1
: Level 0
: 1 E Digital Option Close FF Size Font Text Color Text Opacity Bg Color Bg Opacity Edge Type Edge Color Custom GG A Standard Font 1 White Solid Black Solid None Black Close I SS ii zz ee: Set the word size. I FFoonntt: Select a typeface for the text. I TTeexxtt CCoolloorr: Choose a color for the text. I TTeexxtt OOppaacciittyy: Specify the opacity for the text color. I BBgg ((BBaacckkggrroouunndd)) CCoolloorr: Select a background color. I BBgg ((BBaacckkggrroouunndd)) OOppaacciittyy: Select the opacity for the background color. I EEddggee TTyyppee: Select an edge type. I EEddggee CCoolloorr: Select a color for the edges. 2 3 4 5 6 ENTER ENTER Select CCaappttiioonn Select OO nn. Select DDiiggiittaall OOppttiioonn. ENTER Select CCuussttoomm. Customize the SSttyyllee, FFoonntt, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language. 7RETURN MENU Return to the previous menu. Return to TV viewing S O U N D
L A N G U A G E C O N T R O L 92 TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. TIME Move Enter
: Dc/14/2007, 02:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off 1 MENU Select TT II MM EE. ENTER ENTER 2 3 4 5 6RETURN MENU Select CClloocckk. Select AAuuttoo. Select your viewing area time zone. U.S.A: EE aa ss tt ee rr nn, CC ee nn tt rr aa ll, MM oo uu nn tt aa ii nn, PPaacciiffiicc, AAllaasskkaa, or HHaawwaaiiii. Canada: EEaasstteerrnn, CCeennttrraall, MMoouunnttaaiinn, PPaacciiffiicc, NNeeww FF..llaanndd, or AAttllaannttiicc. Select AAuuttoo, OO ff ff, or OO nn (depending on whether or not your viewing area observes Daylight Saving time). Return to the previous menu. Return to TV viewing TIME Move Enter
: Dc/14/2007, 02:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off Year Date Month FF Auto Hour Minute GG 2007 11 14 4 AM 28 Time Zone Eastern Daylight Saving Auto Close I T M E S E T T I N G 93 Manual Clock Setup If the current time setting is wrong, reset the clock manually. TIME Move Enter TIME Move Enter
: Dc/14/2007, 02:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off
: Dc/14/2007, 02:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off FF Year Month Date Hour Minute Manual GG 2007 11 14 4 AM 29 Time Zone Eastern Daylight Saving Auto Close 1 MENU Select TT II MM EE. ENTER ENTER 2 3 4 5 6RETURN MENU Select CClloocckk. Select MMaannuuaall. Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing I T M E S E T T I N G 94 AUTO ON/OFF TIMER SETTING This function operates only if the current time has been set. The OOffff TTiimmee function overrides the OOnn TTiimmee function if they are both set to the same time. The TV must be in standby mode for the OOnn TTiimmee to work. If you do not press any button within 2 hours after the TV turns on with the OOnn TTiimmee function, the TV will automatically revert to standby mode. TIME Move Enter
: DC/14/2007, 02:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off TIME Move Enter
: DC/14/2007, 02:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off Minute Repeat Hour FF Once 6 AM GG 20 DTV DTV2 30 Input Channel Volume Close 1 MENU Select TT II MM EE. I To cancel OOnn//OOffff TTiimmee function, select OO ff ff. I Only for On Time function ENTER ENTER 2 3 4 5 6RETURN MENU Select OOffff ttiimmee or OOnn ttiimmee. Select RReeppeeaatt. Select OO nn cc ee, EEvveerryyddaayy, MM oo nn~FF rr ii, MM oo nn~SS aa tt, WWeeeekkeenndd, or SSuunnddaayy. Select and set HHoouurr or MMiinnuuttee. Return to the previous menu. Return to TV viewing 1 2 3 4 ENTER Select IInnppuutt. Select TT VV or EExxtt..DDeevviiccee. Set the channel at turn-on. Adjust to sound level at turn-on. I T M E S E T T I N G 95 SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME Move Enter TIME Move Enter
: Dc/14/2007, 02:10 AM Clock
: Off Off Time
: Off On Time Sleep Timer : Off Auto Sleep : Off
: Dc/14/2007, 02:10 AM Clock
: Off Off Time
: Off On Time Sleep Timer : Off Auto Sleep : Off FF GG Off Close Select TT II MM EE. Select SSlleeeepp TTiimmeerr. Select 11 00, 22 00, 33 00, 66 00, 99 00, 11 22 00, 11 88 00, or 22 44 00 minutes. I You can also adjust SSlleeeepp TTiimmeerr in the QQ--MMeennuu. Return to the previous menu. Return to TV viewing 1 MENU 2 3 ENTER ENTER 4RETURN MENU I T M E S E T T I N G 96 AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME Move Enter
: Dc/14/2007, 02:10 AM Clock
: Off Off Time
: Off On Time Sleep Timer : Off Auto Sleep : Off TIME Move Enter
: Dc/14/2007, 02:10 AM Clock
: Off Off Time
: Off On Time Sleep Timer : Off Auto Sleep : Off Off On TV will be automatically turned off, in case of No Signal for 10 minutes. 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select TT II MM EE. Select AAuuttoo SSlleeeepp. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing I T M E S E T T I N G 97 PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad-
casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-
video movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies :
I TV-G (General audience) I TV-PG (Parental guidance suggested) I TV-14 (Parents strongly cautioned) I TV-MA (Mature audience only) I TV-Y I TV-Y7 (Children 7 years older)
(All children) SET PASSWORD & LOCK SYSTEM Setting up Your Password Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. For USA For Canada LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Enter Password
Close 1 MENU 2 1 4 7 3 6 9 2 5 8 0 ENTER Select LL OO CC KK. Input the password. I Enter the password as requested. I The TV is set up with the initial pass-
word 0-0-0-0. P A R E N T A L C O N T R O L
R A T I N G 98 Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Off On Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5RETURN MENU ENTER Select LL OO CC KK. Input the password. Select LLoocckk SSyysstteemm. Select OO nn or OO ff ff. I When you select OO nn, the Lock System is enable. Return to the previous menu. Return to TV viewing P A R E N T A L C O N T R O L
R A T I N G 99 PARENTAL CONTROL /RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block New
Confirm *
Close Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU ENTER Select LL OO CC KK. 2 1 4 7 3 4 3 6 9 2 5 8 0 Input the password. Select SSeett ppaasssswwoorrdd. ENTER 3 6 9 1 4 7 2 5 8 0 Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the CCoonnffiirrmm. 5RETURN MENU Return to the previous menu. Return to TV viewing P A R E N T A L C O N T R O L
R A T I N G 100 CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Block/Unblock Navigate CH Move Page MENU Previous RETURN Exit LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU ENTER Select LL OO CC KK. 2 1 4 7 3 4 5 3 6 9 2 5 8 0 Input the password. Select BBlloocckk CChhaannnneell. ENTER Select a channel to block or unblock. ENTER Block or unblock a channel. 6RETURN MENU Return to the previous menu. Return to TV viewing P A R E N T A L C O N T R O L
R A T I N G 101 PARENTAL CONTROL /RATINGS MOVIE & TV RATING Movie Rating (MPAA) - Only for USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block G PG PG-13 R NC-17 X Blocking Off 1 MENU ENTER Select LL OO CC KK. 2 1 4 7 3 4 3 6 9 2 5 8 0 Input the password. Select MMoovviiee RRaattiinngg. ENTER Select GG, PP GG, PPGG--1133, RR, NNCC--1177 or XX. 5RETURN MENU Return to the previous menu. Return to TV viewing I G (General audience) I PG (Parental guidance suggested) I PG-13 (Parents strongly cautioned) I R (Restricted) I NC-17 (No one 17 and under admitted) I X (Adult only) I Blocking Off (Permits all programs) GG If you set PG-13: G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. P A R E N T A L C O N T R O L
R A T I N G 102 TV Rating Children - Only for USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi-
ences in the TV Rating - sub menu, your children can view those programs. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Fantasy Violence Close 1 MENU 2 1 4 7 3 4 5 3 6 9 2 5 8 0 ENTER ENTER 6RETURN MENU ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--CChhiillddrreenn. Select AA gg ee or FFaannttaassyy VViioolleennccee. I Age (applies to TV-Y, TV-Y7) I Fantasy Violence (applies to TV-Y7) Select block options. Return to the previous menu. Return to TV viewing P A R E N T A L C O N T R O L
R A T I N G 103 PARENTAL CONTROL /RATINGS TV Rating General - Only for USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Dialogue Language Sex Violence Close LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--GGeenneerraall. Select AA gg ee, DDiiaalloogguuee, LLaanngguuaaggee, SS ee xx or VViioolleennccee. Select block options. Return to the previous menu. Return to TV viewing I Age: Applies to TV-G,TV-PG,TV-14,TV-
MA. I Dialogue-sexual dialogue: Applies to TV-PG,TV-14. I Language-adult language: Applies to TV-PG, TV-14, TV-MA. I Sex-sexual situations: Applies to TV-
PG, TV-14, TV-MA. I Violence: Applies to TV-PG, TV-14, TV-
MA. 1 MENU 2 1 4 7 3 4 3 6 9 2 5 8 0 ENTER 5 ENTER 6RETURN MENU P A R E N T A L C O N T R O L
R A T I N G 104 TV Rating English - Only for CANADA Selecting canadian english language rating system. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Blocking off : Permits all programs E C C8+
G PG 14+
18+
Blocking Off 1 MENU 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5RETURN MENU ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--EEnngglliisshh. Select EE, CC, CC88++, GG, PP GG, 1144++, 1188++, or BBlloocckkiinngg OOffff. Return to the previous menu. Return to TV viewing I E: Exempt I C: Children I C8+: Children eight years and older I G: General programming, suitable for all audiences I PG: Parental Guidance I 14+: Viewers 14 years and older I 18+: Adult programming I Blocking Off: Permits all programs P A R E N T A L C O N T R O L
R A T I N G 105 PARENTAL CONTROL /RATINGS TV Rating French - Only for CANADA Selecting canadian french language rating system. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block E G 8ans+
13ans+
16ans+
18ans+
Blocking Off 1 MENU 2 1 4 7 3 4 3 6 9 2 5 8 0 ENTER 5RETURN MENU ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--FFrreenncchh. Select EE, GG, 88aannss++, 1133aannss++, 1166aannss++, 1188aannss++, or BBlloocckkiinngg ooffff. Return to the previous menu. Return to TV viewing I E: Exempt I G: General I 8ans+: General-Not convenient for little children I 13ans+: Not convenient for children of 13 years and younger I 16ans+: Not convenient for children of 16 years and younger I 18ans+: This programs is only for adults I Blocking off: Permits all programs P A R E N T A L C O N T R O L
R A T I N G 106 DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channel signal. This function operates only when TV has received Region5 Rating data. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block E Humor Sport Cruelty Language Sadness Genre Age E Close I Based on rating table, your TV's OSD
(On Screen Display) may differ slightly from what is shown in this manual. 1 MENU 2 1 4 7 3 6 9 2 5 8 0 3 4 5 6 ENTER ENTER ENTER 7RETURN MENU ENTER Select LL OO CC KK. Input the password. Select DDoowwnnllooaaddaabbllee RRaattiinngg. Select desired DDoowwnnllooaaddaabbllee RRaattiinngg option. Select desired HHuummoorr, SSppoorrtt, CCrruueellttyy, LLaanngguuaaggee, SSaaddnneessss, GGeennrree, AA gg ee, or MMoovviiee option. Select block options. Return to the previous menu. Return to TV viewing P A R E N T A L C O N T R O L
R A T I N G 107 PARENTAL CONTROL /RATINGS EXTERNAL INPUT BLOCKING Enables you to select a source to block from the external source devices you have hooked up. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block AV1 AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 FF Off Off GG Off Off Off Off Off Off Off Close Only 32/37/42/47/52LG60/70 1 MENU ENTER Select LL OO CC KK. 2 1 4 7 3 4 5 3 6 9 2 5 8 0 Input the password. Select IInnppuutt BBlloocckk. ENTER Select input source. Select OO nn or OO ff ff. 6RETURN MENU Return to the previous menu. Return to TV viewing P A R E N T A L C O N T R O L
R A T I N G 108 KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 E OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off Off On
: Level 0
: 1 E 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OOPPTTIIOONN. Select KKeeyy LLoocckk. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing I In KKeeyy LLoocckk OO nn, if the TV is turned off, press the rr / I, INPUT, CH D or E button on the TV or POWER, INPUT, or NUMBER buttons on the CH remote control. I With the KKeeyy LLoocckk OOnn, the display KKeeyy LLoocckk OOnn appears on the screen if any button on the front panel is pressed while viewing the TV. P A R E N T A L C O N T R O L
R A T I N G 109 APPENDIX TROUBLESHOOTING TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy.. The remote control doesnt work I Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. I Ensure that the batteries are installed with correct polarity (+ to +, - to -). I Ensure that the correct remote operating mode is set: TV, VCR etc. I Install new batteries. Power is suddenly turned off I Is the sleep timer set?
I Check the power control settings. Power interrupted. I No broadcast on station tuned with Auto off activated. TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. No picture &No sound I Check whether the product is turned on. I Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet?
I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly after switching on I This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. A P P E N D I X No or poor color or poor picture I Adjust Color in menu option. I Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly?
I Activate any function to restore the brightness of the picture. Horizontal/vertical bars or picture shaking I Check for local interference such as an electrical appliance or power tool. Poor reception on some channels I Station or cable product experiencing problems, tune to another station. I Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference. Lines or streaks in pictures I Check antenna (Change the direction of the antenna). 110 TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product I Press the VOL or VOLUME button. I Sound muted? Press MUTE button. I Try another channel. The problem may be with the broadcast. I Are the audio cables installed properly?
I Adjust Balance in menu option. I A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd)) The signal is out of range I Adjust resolution, horizontal frequency, or vertical frequency. I Check the input source. Vertical bar or stripe on background &
Horizontal Noise &
Incorrect position I Work the Auto configure or adjust clock, phase, or H/V position. (Option) Screen color is unstable or single color I Check the signal cable. I Reinstall the PC video card. A P P E N D I X 111 MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet I To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. I Please be sure not to use a wet cloth. Extended Absence CAUTION GG If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. A P P E N D I X 112 PRODUCT SPECIFICATIONS MODELS Dimensions
(Width x Height x Depth) Weight MODELS Dimensions
(Width x Height x Depth) Weight MODELS Dimensions
(Width x Height x Depth) Weight MODELS Dimensions
(Width x Height x Depth) Weight Power requirement Television System Program Coverage External Antenna Impedance Environment condition With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand 26LG30
(26LG30-UA) 32LG30
(32LG30-UA) 26.1 x 20.0 x 9.1 inches 31.6 x 23.8 x 9.1 inches 663.8 x 508.2 x 231.9 mm 801.8 x 604.2 x 231.9 mm 26.1 x 17.7 x 3.6 inches 663.8 x 449.8 x 91.4 mm 31.6 x 21.4 x 4.0 inches 801.8 x 544.1 x 101.0 mm 22.3 pounds / 10.1 kg 19.0 pounds / 8.6 kg 29.5 pounds / 13.4 kg 26.2 pounds / 11.9 kg 37LG30
(37LG30-UA) 42LG30
(42LG30-UA) 36.2 x 26.9 x 11.6 inches 919.6 x 682.3 x 293.8 mm 36.2 x 24.0 x 4.5 inches 919.6 x 610.3 x 114.3 mm 40.7 x 29.2 x 11.6 inches 1032.8 x 742.3 x 293.8 mm 40.7 x 26.4 x 4.5 inches 1032.8 x 670.1 x 115.1 mm 45.6 pounds / 20.7 kg 37.9 pounds / 17.2 kg 51.8 pounds / 23.5 kg 44.1 pounds / 20.0 kg 37LG50
(37LG50-UA) 42LG50
(42LG50-UA) 36.9 x 27.0 x 11.6 inches 936.4 x 684.4 x 293.8 mm 36.9 x 24.1 x 3.5 inches 936.4 x 612.8 x 88.0 mm 36.9 x 27.0 x 11.6 inches 936.4 x 684.4 x 293.8 mm 36.9 x 24.1 x 3.5 inches 936.4 x 612.8 x 88.0 mm 40.3 pounds / 18.3 kg 34.4 pounds / 15.6 kg 40.3 pounds / 18.3 kg 34.4 pounds / 15.6 kg 47LG50
(47LG50-UA) 52LG50
(52LG50-UA) 45.4 x 31.8 x 12.8 inches 1153.7 x 807.2 x 326.0 mm 45.4 x 29.0 x 4.1 inches 1153.7 x 734.5 x 103.0 mm 50.9 x 35.1 x 13.5 inches 1291.7 x 892.2 x 342.9 mm 50.9 x 32.2 x 4.5 inches 1291.7 x 817.0 x 115.3 mm 85.1 pounds / 38.6 kg 77.0 pounds / 34.9 kg 87.1 pounds / 39.5 kg 77.0 pounds / 34.9 kg AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 A P P E N D I X Operating Temperature Operating Humidity Storage Temperature Storage Humidity 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
I The specifications shown above may be changed without prior notice for quality improvement. 113 APPENDIX MODELS Dimensions
(Width x Height x Depth) Weight MODELS Dimensions
(Width x Height x Depth) Weight MODELS Dimensions
(Width x Height x Depth) Weight MODELS Dimensions
(Width x Height x Depth) Weight Power requirement Television System Program Coverage External Antenna Impedance Environment condition With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand 32LG60
(32LG60-UA) 37LG60
(37LG60-UA) 42LG60
(42LG60-UA) 31.8 x 23.9x 9.8 inches 806.6 x 606.5 x 249.0mm 31.8 x 21.7 x 3.1 inches 806.6 x 552.3 x 79.0 mm 36.5 x 27.3 x 11.0 inches 927.0 x 692.8 x 280.5 mm 36.5 x24.8 x 3.5 inches 927.0 x 630.0 x 88.0 mm 40.7 x 29.5 x 11.3 inches 1033.4 x 750.0 x 287.6 mm 40.7 x 27.0x 3.5 inches 1033.4 x 686.8 x 88.5 mm 30.2 pounds / 13.7 kg 24.7 pounds / 11.2 kg 44.1 pounds / 20.0 kg 35.3 pounds / 16.0 kg 54.9 pounds / 24.9 kg 45.0 pounds / 20.4 kg 47LG60
(47LG60-UA) 52LG60
(52LG60-UA) 45.4 x 31.8 x 12.8 inches 1153.7 x 807.2 x 326.0 mm 45.4 x 29.0 x 4.1 inches 1153.7 x 734.5 x 103.0 mm 50.9 x 35.1 x 13.5 inches 1291.7 x 892.2 x 342.9 mm 50.9 x 32.2 x 4.5 inches 1291.7 x 817.0 x 115.3 mm 85.1 pounds / 38.6 kg 77.0 pounds / 34.9 kg 87.1 pounds / 39.5 kg 77.0 pounds / 34.9 kg 32LG70
(32LG70-UA) 31.8 x 23.9x 9.8 inches 806.6 x 606.5 x 249.0mm 31.8 x 21.7 x 3.1 inches 806.6 x 552.3 x 79.0 mm 42LG70
(42LG70-UA) 40.7 x 29.5 x 11.3 inches 1033.4 x 750.0 x 287.6 mm 40.7 x 27.0x 3.5 inches 1033.4 x 686.8 x 88.5 mm 30.2 pounds / 13.7 kg 24.7 pounds / 11.2 kg 54.9 pounds / 24.9 kg 45.0 pounds / 20.4 kg 47LG70
(47LG70-UA) 52LG70
(52LG70-UA) 45.4 x 31.8 x 12.8 inches 1153.7 x 807.2 x 326.0 mm 45.4 x 29.0 x 4.1 inches 1153.7 x 734.5 x 103.0 mm 50.9 x 35.1 x 13.5 inches 1291.7 x 892.2 x 342.9 mm 50.9 x 32.2 x 4.5 inches 1291.7 x 817.0 x 115.3 mm 85.1 pounds / 38.6 kg 77.0 pounds / 34.9 kg 87.1 pounds / 39.5 kg 77.0 pounds / 34.9 kg AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 Operating Temperature Operating Humidity Storage Temperature Storage Humidity 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
I The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 114 MODELS Dimensions
(Width x Height x Depth) With stand Without stand 42PG10
(42PG10-UA) 50PG10
(50PG10-UA) 41.3 x 30.2 x 12.2 inches 1048.0 x 766.0 x 310.0 mm 41.3 x 28.1 x 3.3 inches 1048.0 x 713.0 x 83.5 mm 48.9 x 34.9 x 14.6 inches 1242.0 x 887.6 x 370.0 mm 48.9 x 32.6 x 3.5 inches 1242.0 x 827.2 x 88.0 mm Weight With stand Without stand 61.7 pounds / 28.0 kg 54.2 pounds / 24.6 kg 86.6 pounds / 39.3 kg 76.3 pounds / 34.6 kg MODELS Dimensions
(Width x Height x Depth) Weight MODELS Dimensions
(Width x Height x Depth) Weight MODELS Dimensions
(Width x Height x Depth) Weight Power requirement Television System Program Coverage External Antenna Impedance Environment condition With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand With stand Without stand 42PG20
(42PG20-UA) 50PG20
(50PG20-UA) 41.3 x 30.2 x 12.2 inches 1048.0 x 766.0 x 310.0 mm 41.3 x 28.1 x 3.3 inches 1048.0 x 713.0 x 83.5 mm 48.9 x 34.9 x 14.6 inches 1242.0 x 887.6 x 370.0 mm 48.9 x 32.6 x 3.5 inches 1242.0 x 827.2 x 88.0 mm 61.7 pounds / 28.0 kg 54.2 pounds / 24.6 kg 86.6 pounds / 39.3 kg 76.3 pounds / 34.6 kg 50PG60F-UA
(50PG60F-UA) 60PG60F-UA
(60PG60F-UA) 48.9 x 34.9 x 14.6 inches 1242.0 x 887.6 x 370.0 mm 48.9 x 32.6 x 3.5 inches 1242.0 x 827.2 x 88.0 mm 57.3 x 38.8 x 16.3 inches 1455.0 x 985.0 x 414.0 mm 57.3 x 38.5 x 15.8 inches 1455.0 x 914.8 x 82.8 mm 86.6 pounds / 39.3 kg 76.3 pounds / 34.6 kg 137.6 pounds / 62.4 kg 127.8 pounds / 58.0 kg 50PG70F-UA
(50PG70F-UA) 60PG70F-UA
(60PG70F-UA) 48.9 x 34.9 x 14.6 inches 1242.0 x 887.6 x 370.0 mm 48.9 x 32.6 x 3.5 inches 1242.0 x 827.2 x 88.0 mm 57.5 x 38.5 x 15.8 inches 1459.4 x 976.8 x 401.0 mm 57.5 x 38.5 x 15.8 inches 1459.4 x 914.8 x 82.8 mm 86.6 pounds / 39.3 kg 76.3 pounds / 34.6 kg 86.6 pounds / 39.3 kg 76.3 pounds / 34.6 kg AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 Operating Temperature Operating Humidity Storage Temperature Storage Humidity 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
I The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 115 APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 2 3 4 5 6 Testing your remote control. To find out whether your remote control can operate other components without programming, turn on a component such as a STB and press the corresponding mode button (such as a SS TT BB) on the remote con-
trol, while pointing at the component. Test the PPOOWWEERR and CC HH buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device. Switch on the component to be programmed, then press the corresponding mode button (such as SS TT BB) on the remote control. The remote control button of the desired device is illumintated. Press the MMEENNUU and MMUUTTEE buttons simultaneously, the remote control is ready to be programmed with the code. Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off. Press the MMEENNUU button to store the code. Test the remote control functions to see if the component responds correctly. If not, repeat from step 2. A P P E N D I X 116 Codes Brand Codes Brand Codes VCR Brand AIWA AKAI 034 016 043 046 124 125 146 072 031 033 103 AMPRO ANAM AUDIO DYNAMICS 012 023 039 043 035 037 129 BROKSONIC 028 031 033 CANON 108 CAPEHART CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 132 136 012 045 004 018 026 034 043 063 137 150 DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO HARMAN KARDON HITACHI INSTANTREPLAY 031 033 031 033 JCL 012 013 015 033 JCPENNY 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 014 034 039 043 047 048 JENSEN JVC KENWOOD LG (GOLDSTAR) 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 SEARS SCOTT SAMSUNG SANSUI SANYO SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 008 009 010 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 040 101 TOTEVISION UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC WARDS SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 YAMAHA ZENITH A P P E N D I X 117 APPENDIX Remote Control Code HDSTB Brand Codes Brand Codes Brand Codes HOUSTON TRACKER 033 037 039 051 HUGHES JANIEL JERROLD KATHREIN LEGEND LG LUTRON LUXOR MACOM 057 104 068 060 147 061 108 057 001 132 062 144 010 059 063 064 065 057 028 124 125 069 070 MEMOREX NEXTWAVE NORSAT PACE SKY SATELLITE 143 060 142 PANASONIC PANSAT 121 PERSONAL CABLE 117 PHILIPS 071 105 PICO 019 102 PRESIDENT PRIMESTAR 030 110 111 PROSAT RCA REALISTIC SAMSUNG SATELLITE SERVICE CO 028 035 047 057 072 066 106 043 074 123 085 SCIENTIFIC ATLANTA 032 138 SONY STARCAST SUPER GUIDE TEECOM 103 041 020 124 125 023 026 075 087 088 090 107 130 137 002 127 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 TOSHIBA UNIDEN VIEWSTAR WINEGARD ZENITH Brand MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN Codes 002 023 008 017 003 009 013 004 026 021 005 006 Brand Codes RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 006 011 015 007 005 006 019 008 009 018 010 016 025 ALPHASTAR DSR 123 AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 018 036 055 008 009 012 077 054 CHAPARRAL CITOH CURTIS MATHES 050 145 DRAKE DX ANTENNA ECHOSTAR 005 006 007 010 011 052 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 ELECTRO HOME 089 114 EUROPLUS 017 021 022 027 FUJITSU 133 134 GENERAL INSTRUMENT 003 004 016 029 HITACHI 031 059 101 139 140 DVD Brand Codes 022 020 014 005 006 027 APEX DIGITAL DENON GE HARMAN KARDON JVC LG MAGNAVOX MARANTZ 012 001 010 016 025 013 024 A P P E N D I X 118 IR CODES 1. How to Connect I Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes I Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 I Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame I Lead code I Repeat code I BBiitt ddeessccrriippttiioonn Bit 0 Repeat code Tf 9 ms 4.5 ms 9 ms 2.25 ms 0.55 ms Bit 1 A P P E N D I X 0.56 ms 1.12 ms 0.56 ms 2.24 ms I FFrraammee iinntteerrvvaall:: TTff The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz 119 APPENDIX Code
(Hexa) Function Note 08 45 43 0B POWER Q.MENU MENU INPUT Remote control Button (Power On/Off) Remote control Button Remote control Button Remote control Button 10-19 Number Key 0-9 Remote control Button 4C 1A 09 02 03 00 01 1E 40 41 07 06 44 5B 7E 30 B0 BA B1 BD 8F 8E
- (Dash) FLASHBK MUTE VOL +
VOL -
CH CH FAV ENTER RETURN SIMPLINK AV MODE PLAY PAUSE STOP REC REW FF Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button A P P E N D I X 120 EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. I Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL CABLE IN DVI IN 2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO RS-232C IN
(CONTROL & SERVICE) AUDIO OUT 1 N I S-VIDEO VIDEO L
(MONO) AUDIO R V A PC Type of Connector; D-Sub 9-Pin Male Communication Parameters I Baud rate : 9600 bps (UART) I Data length : 8 bits I Parity : None I Stop bit : 1 bit I Communication code : ASCII code I Use a crossed (reverse) cable.
NOTE GG This product has command echo back in the RS-232C Command. No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection 1 6 5 9 A P P E N D I X 121 APPENDIX RS-232C Configurations Either cable below can be used. 7-Wire Configuration
(Serial female-female NULL modem cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations
(Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 FF 1 EE GG Close Set ID Use this function to specify a TV ID number. Refer to Real Data Mapping1. GG pp..112255. OPTION Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID Move Enter
: English
: On
: Off
: Off
: Level 0
: 1 EE Select OOPPTTIIOONN. Select SSeett IIDD. Choose the desired TV ID number. The adjustment range of Set ID is 1~99. Return to the previous menu. Return to TV viewing A P P E N D I X 122 1 MENU 2 3 ENTER ENTER 4RETURN MENU Command Reference List CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA
(Hexadecimal) CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA
(Hexadecimal) 01. Power 02. Input Select 03. Input Select 04. Aspect Ratio 05. Screen Mute 06. Volume Mute 07. Volume Control 08. Contrast 09. Brightness 10. Color 11. Tint 12. Sharpness 13. OSD Select 14. Remote Control Lock Mode k k x k k k k k k k k k k k a b b c d e f g h i j k l m 0 ~ 1
(GG p.124)
(GG p.124)
(GG p.124) 0 ~ 1 0 ~ 1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 1 0 ~ 1 k k k k k k k j j m m m 15. Treble 16. Bass 17. Balance 18. Color Temperature 19. Red Adjustment 20. Green Adjustment 21. Blue Adjustment 22. ISM Method 23. Low Power 25. Channel Add/Del 26. Key 27. Back Light Only LCD TV Model Only Plasma TV Model r s t u v w
p q b c g 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 3 0 ~ C8 0 ~ C8 0 ~ C8
(GG p.126) 0 ~ 1 0 ~ 1
(GG p.127) 0 ~ 64 CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA0 DATA1 DATA2 DATA3 DATA4 DATA5
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal) 24. Channel Tuning m a physical major major low minor high minor low attribute program high program low Transmission / Receiving Protocol TTrraannssmmiissssiioonn
[[CCoommmmaanndd11]][[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[DDaattaa]][[CCrr]]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission
/receiving protocol.
[DATA] : To transmit the command data. Transmit the FF data to read status of command.
[Cr] : Carriage Return ASCII code 0x0D
[ ] : ASCII code space (0x20)
* In this model, TV will not send the status during the standby mode. OOKK AAcckknnoowwlleeddggeemmeenntt
[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[OOKK]][[DDaattaa]][[xx]]
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.
[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.
[OK] : Use the large character. EErrrroorr AAcckknnoowwlleeddggeemmeenntt
[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[NNGG]][[DDaattaa]][[xx]]
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.
[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.
[NG] : Use the large character A P P E N D I X 123 APPENDIX 0011.. PPoowweerr ((CCoommmmaanndd:: kk aa)) To control Power On/Off of the TV. 0055.. SSccrreeeenn MMuuttee ((CCoommmmaanndd:: kk dd)) To select screen mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 0: Power Off Data 1: Power On Data 0: Screen mute off (Picture on) Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
Data 1: Screen mute on (Picture off)
* In a like manner, if other functions transmit FF data Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 0022.. IInnppuutt SSeelleecctt ((CCoommmmaanndd:: kk bb)) To select input source for the TV. Transmission [k][b][ ][Set ID][ ][Data][Cr]
Data 0: DTV Data 2: AV1 Data 1: Analog Data 3: AV2 Data 4: Component 1 Data 5: Component 2 Data 7: RGB-PC Data 9: HDMI2 Data 8: HDMI1 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
* You can select HDMI3 using ccoommmmaanndd xx bb.
* If you select input source, we recommend ccoommmmaanndd xx bb. 0066.. VVoolluummee MMuuttee ((CCoommmmaanndd:: kk ee)) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off) Data 1 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
0077.. VVoolluummee CCoonnttrrooll ((CCoommmmaanndd:: kk ff)) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1. See page 125. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
0033.. IInnppuutt SSeelleecctt ((CCoommmmaanndd:: xx bb)) To select input source for TV. 0088.. CCoonnttrraasstt ((CCoommmmaanndd:: kk gg)) To adjust screen contrast. You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1. See page 125. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
0099.. BBrriigghhttnneessss ((CCoommmmaanndd:: kk hh)) To adjust screen brightness. You can also adjust brightness in the Picture menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1. See page 125. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) Data 01: DTV (Cable) Data 10: Analog (Antenna) Data 11: Analog (Cable) Data 20: AV1 Data 21: AV2 Data 40: Component 1 Data 41: Component 2 Data 60: RGB-PC Data 91: HDMI2 Data 90: HDMI1 Data 92: HDMI3 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
0044.. AAssppeecctt RRaattiioo ((CCoommmmaanndd:: kk cc)) To adjust the screen format. You can also adjust the screen format using the RATIO button on remote control or in the Picture menu. Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 1: 4:3 5: Zoom 2 2: 16:9 4: Zoom 1 6: Set by program 9: Just scan Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
Reserved A P P E N D I X 124 1100.. CCoolloorr ((CCoommmmaanndd:: kk ii)) To adjust screen color. 1166.. BBaassss ((CCoommmmaanndd:: kk ss)) To adjust bass. You can also adjust color in the Picture menu. You can also adjust bass in the Audio menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1 as shown below. Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1 as shown below. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
1111.. TTiinntt ((CCoommmmaanndd:: kk jj)) To adjust screen tint. You can also adjust tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 0 ~ Green: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1 as shown below. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
1122.. SShhaarrppnneessss ((CCoommmmaanndd:: kk kk)) To adjust screen sharpness. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1 as shown below. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
1133.. OOSSDD SSeelleecctt ((CCoommmmaanndd:: kk ll)) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off Data 1: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
1144.. RReemmoottee CCoonnttrrooll LLoocckk MMooddee ((CCoommmmaanndd:: kk mm)) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off Data 1: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. 1155.. TTrreebbllee ((CCoommmmaanndd:: kk rr)) To adjust treble. You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1 as shown. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
1177.. BBaallaannccee ((CCoommmmaanndd:: kk tt)) To adjust balance. You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1 as shown below. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
1188.. CCoolloorr TTeemmppeerraattuurree ((CCoommmmaanndd:: kk uu)) To adjust color temperature. You can also adjust color temperature in the Picture menu. Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm 3: User Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
1199.. RReedd AAddjjuussttmmeenntt ((CCoommmmaanndd:: kk vv)) To adjust red in color temperature Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: C8
*Refer to Real data mapping 2 as shown below. Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
2200.. GGrreeeenn AAddjjuussttmmeenntt ((CCoommmmaanndd:: kk ww)) To adjust green in color temperature. Transmission [k][w][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: C8
*Refer to Real data mapping 2 as shown below. Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]
*Real data mapping 1
*Real data mapping 2 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 0 : -20 5 : -19 A : -18 5F: -1 64: 0 69: +1 C3 : +19 C8 : +20 A P P E N D I X 125 APPENDIX 2211.. BBlluuee AAddjjuussttmmeenntt ((CCoommmmaanndd:: kk $$)) To adjust blue in color temperature. Transmission [k][$][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: C8
*Refer to Real data mapping 2. See page 125. Acknowledgement [$][ ][Set ID][ ][OK/NG][Data][x]]
2222.. IISSMM MMeetthhoodd ((CCoommmmaanndd22:: jj pp))
(Only Plasma TV model) To avoid having a fixed image remain on screen. Transmission [ j ][p][ ][Set ID][ ][Data][Cr]
Data 1: Inversion 4: White Wash 2: Orbiter 8: Normal Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
2233.. LLooww PPoowweerr ((CCoommmmaanndd22:: jj qq))
(Only Plasma TV model) To control the low power function on/off. Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 0: Low Power off 1: Low Power on Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
2244.. CChhaannnneell TTuunniinngg ((CCoommmmaanndd:: mm aa)) To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 0: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 Data1 & 2: Major Channel Number Data1: High byte Data2: Low byte Two bytes are available for the Major and Minor, nor-
mally only the second byte is used. Data3 & 4: Minor Channel Number Not needed for NTSC. A P P E N D I X 126 Data5:
7 0 1 Main/Sub Picture Main Sub 6 0 1 Two/One Part Channel Two One 5 0 1 Using Physical Channel 4 Reserved Use No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 2 0 0 0 0 1 1 1 1 x 1 1 0 0 1 1 0 0 1 1 x 1 0 0 1 0 1 0 1 0 1 x 1 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved
... Reserved 2255.. CChhaannnneell AAdddd//DDeell ((CCoommmmaanndd:: mm bb)) To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete Data 1: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
2266.. KKeeyy ((CCoommmmaanndd:: mm cc)) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code: Refer to page 120. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
2277.. BBaacckk LLiigghhtt ((CCoommmmaanndd:: mm gg))
(Only LCD TV model) To adjust screen back light. Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:0 ~ Max:64 (*transmit by Hexadecimal code)
*Refer to Real data mapping 1. See page 125. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
The table above lists the binary code which must be converted to Hexadecimal before sending. For example:
The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.
* 7th bit : For which source do you want to change the channel.
* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.
* 5th bit: Use 0 with NTSC since it can only use the phys-
ical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
* Tune Command Examples:
1. Tune to the analog (NTSC) cable channel 35. Data 0 = Physical of 35 = 23 Data 1 & 2 = No Major = 00 00 Data 3 & 4 = No Minor = 00 00 Data 5 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital (ATSC) local channel 30-3. Data 0 = Dont know Physical = 00 Data 1 & 2 = Major is 30 = 00 1E Data 3 & 4 = Minor is 3 = 00 03 Data 5 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data0][Data1]
[Data2][Data3][Data4][x][a][ ][Set ID]
[ ][NG][Data0][x]
A P P E N D I X 127
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-12-27 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-12-27
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0023476120
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
37LG30UA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K**** H********
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD TV/MONITOR | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
ESTECH Co., Ltd.
|
||||
1 | Name |
Y****** J******
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
j******@estech.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 19 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC