FCC ID: BEJ65LA9700UA LED TV

 

Order Number Test Report Number

: GETEC-C1-13-204

: GETEC-E3-13-045 FCC Part 15 subpart B Page 1 / 1

APPENDIX G

: USERS MANUAL EUT Type: LED TV FCC ID.: BEJ65LA9700UA OWNERS MANUAL LED TV*

* LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 55LA9700 65LA9700 84LA9800 P/NO : MFL67652632 (1306-REV00) www.lg.com 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

y Do not use this apparatus near water.

y Clean only with a dry cloth.

y Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

y Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

y Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country). E N G L I S H WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. NOTE The note helps you understand and use the product safely. Please read the note carefully before using the product. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

y Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

y Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

y Only use attachments/accessories specified by the manufacturer.

y Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

y Unplug this apparatus during lightning storms or when unused for long periods of time. IMPORTANT SAFETY INSTRUCTIONS 3

y Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

y CAUTION concerning the Power Cord

(Can differ by country):

It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owners manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. E N G L I S H

y Refer all servicing to qualified service personnel.

y Warning - To reduce the risk of fire or electrical Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

y Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in. 4 IMPORTANT SAFETY INSTRUCTIONS

y Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

y Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker E N G L I S H

y As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

y Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product.

y Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code

(NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Ground Clamp Electric Service Equipment Ground Clamp

y Cleaning NEC: National Electrical Code Antenna Lead in Wire Antenna Discharge Unit

(NEC Section 810-20) Grounding Conductor

(NEC Section 810-21) Power Service Grounding Electrode System

(NEC Art 250, Part H) When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.

y Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

y Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

y If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

y Keep the product away from direct sunlight.

y Never touch this apparatus or antenna during a thunder or lightning storm.

y When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

y Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

y Disconnecting the Main Power The power outlet used with this device must remain easily accessible.

y Store the accessories (battery, etc.) in a safe location out of the reach of children.

y This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

y Do not dispose of batteries in a fire.

y Do not short circuit, disassemble or allow the batteries to overheat.

y Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. g In a very few cases, you could see fine dots on the screen while youre viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

y Generated Sound Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

y Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

y If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TVs performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. Preventing Image burn or Burn-in on your TV screen

y If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

y If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

y Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn. IMPORTANT SAFETY INSTRUCTIONS 5 For USA and Canada FCC NOTICE

y This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

y - Reorient or relocate the receiving antenna.

y - Increase the separation between the equipment and the receiver.

y - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

y - Consult the dealer or an experienced radio/

TV technician for help.

y This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE TO CABLE/TV INSTALLER

y This reminder is provided to call the CATV system installers attention to Article 820-

40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. E N G L I S H 6 IMPORTANT SAFETY INSTRUCTIONS Viewing 3D Imaging CAUTION WARNING Viewing Environment

y Viewing Time

- When watching 3D content, take 5 - 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness

y Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D content.

y Do not watch 3D videos if you feel nauseous, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

y 3D Content is not recommended for those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

y If you have strabismus (cross-eyed), amblyopia

(weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

y If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D content. E N G L I S H Symptoms which require discontinuation or refraining from watching 3D content

y Do not watch 3D content when you feel fatigue from lack of sleep, overwork or intoxication.

y When these symptoms are experienced, stop using/watching 3D content and get enough rest until the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue. Viewing Environment

y Viewing Distance

- Maintain a distance of at least twice the screen diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV. Viewing Age

y Infants / Children

- Usage/ Viewing 3D content for children under the age of 5 are prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D content.

- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

y Teenagers

- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

y Elderly Cautions when using the 3D glasses

y Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

y Using modified 3D glasses may cause eye strain or image distortion.

y Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

y The 3D glasses are fragile and are easy to scratched. Use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals. LICENSES / OPEN SOURCE SOFTWARE NOTICE 7 LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX, DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents:

7,295,673; 7,460,668; 7,515,710; 7,519,274 E N G L I S H Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;

6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product. 8 TABLE OF CONTENTS TABLE OF CONTENTS 2 6 7 7 8 9 9 9 12 13 15 16 16 18 19 20 21 23 23 24 24 E N G L I S H IMPORTANT SAFETY INSTRUCTIONS Viewing 3D Imaging LICENSES OPEN SOURCE SOFTWARE NOTICE TABLE OF CONTENTS 36 MAGIC REMOTE CONTROL FUNCTIONS 37 37 37 Registering Magic Remote Control How to use Magic Remote Control Precautions to Take when Using the Magic Remote Control 38 WATCHING TV 38 Turning the TV on for the first time INSTALLATION PROCEDURE 39 USING THE USER GUIDE ASSEMBLING AND PREPARING 40 SPECIFICATIONS Unpacking Optional Extras Parts and Buttons Lifting and moving the TV Setting up the TV

- Attaching the stand

- Mounting on a table

- Tidying cables

- Using Sliding Speaker

- Mounting on a wall Using Built-in Camera

- Preparing Built-in Camera

- Name of Parts for the Built-In Camera

- Checking the Cameras Shooting Range 43 EXTERNAL CONTROL DEVICE SETUP 44 MAINTENANCE 44 44 44 Cleaning Your TV

- Screen, Frame, Cabinet and Stand

- Power Cord 44 TROUBLESHOOTING 25 MAKING CONNECTIONS 25 26 26 27 28 29 30 31 31 33 33 34 35 Connecting to an antenna or cable Connecting to a HD receiver, DVD Player or VCR

- HDMI Connection

- DVI to HDMI Connection

- Connecting to a mobile phone

- Component Connection

- Composite Connection Connecting a PC

- HDMI Connection or DVI to HDMI Connection Connecting to an Audio System

- Digital Optical Audio Connection Connecting Headphones Connecting a USB Device NOTE

y Image shown may differ from your TV.

y Your TVs OSD (On Screen Display) may differ slightly from that shown in this manual.

y The available menus and options may differ from the input source or product model that you are using.

y New features may be added to this TV in the future. INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9 INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION

y Do not use any unapproved items to ensure the safety and product life span.

y Any damages or injuries by using unapproved items are not covered by the warranty.

y Some models appear to have a thin film on the screen. It is actually part of the screen, do not remove it. E N G L I S H NOTE

y The items supplied with your product may vary depending on the model.

y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

(0.39 inches) thick and 18 mm (0.7 inches) width.

y Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TVs USB port. B B A A

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches) 10 ASSEMBLING AND PREPARING Magic Remote Control, Batteries (AA)

(See p. 36) Owners Manual Power Cord

(Depending on model)

(For 84LA9800)

(For 55/65LA9700) Tag On Tag On Stand Screws 4 EA, M4 x L20 6 EA, M5 x L16

(See p. 17)

(For 84LA9800) E N G L I S H Stand Screws 4 EA, M4 x L14

(See p. 16)

(For 55/65LA9700) Stand Body / Stand Base

(See p. 17) Stand Base

(See p. 16) Cable Holder

(See p. 19, 20)

(For 55/65LA9700) Component Video Cable

(See p. 29) Composite Video Cable

(See p. 29, 30) Wall Mount Inner Spacers 4 EA

(See p. 22) ASSEMBLING AND PREPARING 11

(For 55LA9700) Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country. Dual Play Glasses The number of Dual play glasses may differ depending on the model or country.

(Depending on model) Wall Mount Screws 4 EA, M6 x 54

(For 65LA9700) Wall Mount Screws 4 EA, M8 x 44 E N G L I S H 12 ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed manufacturers circumstances or policies. AN-MR400 Magic Remote

(For 84LA9800) AG-F***

Cinema 3D Glasses AG-F***DP Dual Play Glasses Tag On E N G L I S H LG Audio Device Tag On AN-BL***

Wireless IR Blaster

(Depending on model)

(For 84LA9800) AN-VC5**

Video Call Camera ASSEMBLING AND PREPARING 13 Parts and Buttons For LA9700 Series Video call camera Screen OK SETTINGS INPUT E N G L I S H Buttons Speakers Remote control and Intellgent1 sensors. Power Indicator Button

(OK

(SETTINGS)

(INPUT

) Description Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menus, or saves your input and exits the menus. Changes the input source. Turns the power on or off. 1.Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 14 ASSEMBLING AND PREPARING For LA9800 Series Screen OK SETTINGS INPUT E N G L I S H Speakers Buttons Remote control and Intellgent1 sensors. Logo light Button

(OK

(SETTINGS)

(INPUT

) Description Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menus, or saves your input and exits the menus. Changes the input source. Turns the power on or off. 1.Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. ASSEMBLING AND PREPARING 15

y When transporting a large TV, there should be at least 2 people.

y When transporting the TV by hand, hold the TV as shown in the following illustration.

y When transporting the TV, do not expose the TV to jolts or excessive vibration.

y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION

y Avoid touching the screen at all times, as this may result in damage to the screen.

y Do not place the product on the floor with its front facing down. Doing so may result in damage to the screen.

y It is recommended to move the TV in the box or packing material that the TV originally came in.

y Before moving or lifting the TV, disconnect the power cord and all cables.

y When holding the TV, the screen should face away from you to avoid damage.

y Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. E N G L I S H 16 ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTION

y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

y Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

y Do not tighten the screws with too much force; otherwise they may be damaged and come loose later. NOTE

y Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. For LA9700 Series E N G L I S H 1 Front 4 2 Wrapping bag

(Depending on model) Stand Base M4 x L14 2 EA M4 x L14 2 EA 3 For LA9800 Series ASSEMBLING AND PREPARING 17 Front 4 Stand Body Stand Base Front M5 x 16 6 EA 1 2 3 M4 x L20 4 EA E N G L I S H 18 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table.

- Leave a 10 cm (minimum) space from the wall for proper ventilation. Adjusting the angle of the TV to suit view Swivel 7 degrees to the left or right and adjust the angle of the TV to suit your view.

(For 84LA9800) 7 7 10 cm 10 cm 10 cm 10 cm CAUTION E N G L I S H 5 cm 10 cm

y When adjusting the angle of the TV, watch out for your fingers.

y Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. Rear Front 2 Connect the power cord to a wall outlet. CAUTION

y Do not place the TV near or on sources of heat, as this may result in fire or other damage. ASSEMBLING AND PREPARING 19 Securing the TV to a wall (optional) Tidying cables

(Depending on model)

(For LA9700 Series) Gather and bind the cables with the cable holder on the back of the TV. Cable Holder E N G L I S H CAUTION

y Do not move the TV by holding the cable holder , as the cable holders may break, and injuries and damage to the TV may occur. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTION

y Make sure that children do not climb on or hang on the TV. NOTE

y Use a platform or cabinet that is strong and large enough to support the TV securely.

y Brackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer. 20 ASSEMBLING AND PREPARING

(For LA9800 Series) 1 Gather and bind the cables with the cable management. Using Sliding Speaker

(For LA9700 Series) Sliding Speaker 1 When TV is turned ON, the hidden Speaker slides out from inside the TV. 2 Go to More Settings SOUND Sliding Speaker to set Sliding Speaker. If you are mounting TV on entertainment table/unit, please make sure there is enough clearance between yourself and foreign objects to allow operation of internal sliding speaker otherwise injury to yourself or damage to TV could occur. Please Do NOT use excessive force during operation of internal sliding Speaker as it may cause it to malfunction. Make sure Speaker is in OPEN position when viewing TV as sound will be abnormal or distorted. 3 When transporting the TV, make sure that the Sliding Speaker is closed. If the Sliding Speaker is open when being transported, it may become damaged, resulting in malfunction. To close the Sliding Speaker, go to SOUND Sliding Speaker, select Open when TV is turned on and press the POWER button. Cable Management E N G L I S H 2 Gather and bind the cables with the cable holder. Cable Holder CAUTION

y Do not move the TV by holding the cable holder , as the cable holders may break, and injuries and damage to the TV may occur. ASSEMBLING AND PREPARING 21 Mounting on a wall An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. Model VESA (A x B) A B 65LA9700 84LA9800 600 x 400 Standard screw Number of screws Wall mount bracket

(optional) M8 4 LSW630B Wall mount bracket (optional) LSW430B LSW630B 10 cm 10 cm 10 cm 10 cm Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Model VESA (A x B) A B 55LA9700 400 x 400 Standard screw Number of screws Wall mount bracket

(optional) M6 4 LSW430B E N G L I S H 22 ASSEMBLING AND PREPARING CAUTION

y Disconnect the power before moving or installing the TV. Otherwise electric shock may occur.

y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

y Do not over tighten the screws as this may cause damage to the TV and void your warranty.

y Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE

y Use the screws that are listed in the VESA standard screw specifications.

y The wall mount kit includes an installation manual and necessary parts.

y The wall mount bracket is optional. You can obtain additional accessories from your local dealer.

y The length of screws may differ depending on the wall mount. Make sure to use the proper length.

y For more information, refer to the manual supplied with the wall mount.

y When attaching a third-party wall mounting bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket. E N G L I S H Wall Mount Inner Spacer

(For LA9700 Series) Using Built-in Camera Preparing Built-in Camera ASSEMBLING AND PREPARING 23 1 Pull up the built-in camera at the back of the TV.

(For LA9700 Series) You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. NOTE

y Before using the built-in camera, you must recognize the fact that you are legally responsible for the use or misuse of the camera by the relevant national laws including the criminal law.

y The relevant laws include the Personal Information Protection law which regulates the processing and transferring of personal information and the law which regulates the monitoring by camera in a workplace and other places.

y When using the built-in camera, the user must gain consent from the persons being observed. Please avoid using the camera in the following manner. We suggest avoiding the following situations:

(1) Using the camera in areas where the use of camera is generally prohibited such as restroom, locker room, fitting room and security area.

(2) Using the camera while causing the infringement of privacy.

(3) Using the camera while causing the violation of the relevant regulations or laws. E N G L I S H NOTE

y Remove the protective film before using the built-in camera. 2 You can adjust the angle of the camera with the angle adjustment lever on the back of the built-in camera (within 5 degrees vertically). Angle Adjustment Lever 24 ASSEMBLING AND PREPARING 3 Pull down the built-in camera when you are not using it. Checking the Cameras Shooting Range 1 Press the SMART button on the remote control to display the More menu. 2 Select Settings from the More menu and then press the

Wheel (OK) button. 3 Go to OPTION Camera Setting Help and press the

Wheel (OK) button. NOTE

y The optimal distance from the camera to use the motion recognition function is between 1.5 m and 4.5 m. E N G L I S H Name of Parts for the Built-In Camera Microphone Indicator Camera Lens MAKING CONNECTIONS 25 MAKING CONNECTIONS

y This section uses illustrations of the LA9700 series. You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external devices connection, refer to the manual provided with each device. NOTE

y If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.

y The external device connections shown may differ slightly from illustrations in this manual.

y Connect external devices to the TV regardless of the order of the TV port.

y If you connect a gaming device to the TV, use the cable supplied with the gaming device.

y Refer to the external equipments manual for operating instructions. Connecting to an antenna or cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. E N G L I S H VHF Antenna UHF Antenna Antenna Terminal NOTE

y Use a signal splitter to use more than 2 TVs.

y Visit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna.

y DTV Audio Supported Codec: MPEG, Dolby Digital.

(*Not Provided) Coaxial (75) CAUTION

y Make sure not to bend the copper wire of the RF cable. Copper wire

y Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. 26 MAKING CONNECTIONS Connecting to a HD receiver, DVD Player or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE

y Use the latest High Speed HDMI Cable that supports CEC (Customer Electronics Control) function.

y High Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher.

y HDMI Audio Supported Format: PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz / 88 kHz / 96 kHz / 176 kHz / 192 kHz). Choose any HDMI input port to connect. It does not matter which port you use. E N G L I S H

(*Not Provided) HDMI DVD / Blu-Ray / HD Cable Box / HD STB ARC (Audio Return Channel)

y When connected with a high-speed HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable.

y ARC is only supported on the HDMI input 1 (ARC) port. An external audio device that supports ARC should be connected to HDMI 1 if you wish to use ARC. MAKING CONNECTIONS 27 DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. NOTE

y When using the HDMI/DVI cable, Single link is only supported. Choose any HDMI input port to connect. It does not matter which port you use.

(*Not Provided) E N G L I S H DVI OUT AUDIO OUT DVD / Blu-Ray / HD Cable Box YELLOW

(*Not Provided) 28 MAKING CONNECTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE

y Connect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV.

y This only works with an MHL-enabled phone.

y With some MHL supporting mobile phones, you can use the TV remote to control the phone.

y An MHL passive cable is needed to connect the TV and a mobile phone.

y Remove the MHL cable from the TV when:

- the MHL function is disabled

- your mobile device is fully charged in standby mode

) L H M

3 MHL Cable

(*Not Provided) Mobile phone E N G L I S H MAKING CONNECTIONS 29 Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE

y If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.

y Check to ensure the cables are matched with the corresponding color connection. IN COMPONENT Y PR PB AV VIDEO AUDIO E N G L I S H YELLOW

(Use the composite video cable provided.) GREEN

(Use the component video cable provided.) Y E L L O W

(*Not Provided) W H T E I W H T E I W H T E I R E D R E D R E D R E D B L U E B L U E R E D R E D B L U E L R G R E E N G R E E N G R E E N AUDIO VIDEO DVD / Blu-Ray / HD Cable Box

(*Not Provided) 30 MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE

y If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.

y Check to ensure the cables are matched with the corresponding color connection. IN COMPONENT Y PR PB AV VIDEO AUDIO E N G L I S H YELLOW

(Use the composite video cable provided.)

(*Not Provided) Y E L L O W Y E L L O W Y E L L O W W H T E I W H T E I W H T E I R E D R E D R E D VIDEO L

MONO

) AUDIO R VCR / DVD / Blu-Ray / HD Cable Box Connecting a PC NOTE MAKING CONNECTIONS 31

y It is recommended to use an HDMI connection for the best image quality.

y Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.

y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

y The synchronization input form for Horizontal and Vertical frequencies is separate.

y Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

y If you are using DVI out from a PC, you have to connect analog audio separately. Refer to the instructions on the next page.

y When using the HDMI/DVI cable, Single link is only supported. HDMI Connection or DVI to HDMI Connection Choose method A or B to make connection. Method A: HDMI Connection Choose any HDMI input port to connect. It does not matter which port you use. E N G L I S H

(*Not Provided) HDMI PC 32 MAKING CONNECTIONS Method B: DVI to HDMI Connection Choose any HDMI input port to connect. It does not matter which port you use.

(*Not Provided) E N G L I S H YELLOW

(*Not Provided) AUDIO OUT DVI OUT PC MAKING CONNECTIONS 33 Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE

y Do not look into the optical output port. Looking at the laser beam may damage your vision.

y Audio with ACP (Audio Copy Protection) function may block digital audio output. E N G L I S H

(*Not Provided) Digital Audio System OPTICAL AUDIO IN 34 MAKING CONNECTIONS Connecting Headphones Listening to sound with headphones NOTE

y AUDIO menu options are disabled when using headphones.

y When changing AV MODE with headphones connected, the change is applied to video but not to audio.

y Optical Digital Audio Out is not available when headphones are connected.

y Headphone impedance: 16 :

y Max audio output: 0.6 mW to 1.3 mW

y Headphone jack size: 0.35 cm (0.13 inches) CAUTION hearing.

y Do not use headsets (earphones) at high volume or for a long time. It may cause damage to your E N G L I S H Headphone

(*Not Provided) MAKING CONNECTIONS 35 Connecting a USB Device Connect a USB storage device such as USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE

y To use Time Machine function, make sure your USB drive is connected to the USB IN 1 Time Machine Ready port.

y Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it directly to the USB port on the TV. Choose any USB input port to connect. It does not matter which port you use.

(*Not Provided) E N G L I S H USB / USB HUB / HDD 36 MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS When the message Magic remote control battery is low. Change the battery. is displayed, replace the battery. To install batteries, open the battery cover, replace ends to the label inside the compartment, batteries (1.5 V AA) matching and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. and CAUTION

y Do not mix old and new batteries, as this may damage the remote control. This remote uses infrared light. When in use, it should be pointed in the direction of the TVs remote sensor. E N G L I S H

Wheel (OK) Selects menus or options and confirms your input. Scrolls through the saved channels. If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. To display the pointer again, shake the Magic remote control from side to side.

BACK Returns to the previous level.

Voice recognition

-This is a beta version and only available in selected functions for supported models.

-Network connection is required to use the voice recognition function. 1. Press the Voice recognition button. 2. Speak slowly and precisely. When a voice is recognized, the processing message appears on the screen. f8VHWKHPDJLFUHPRWHFRQWUROQR

further than 10 cm from your face. Used for viewing 3D video. Pointer (RF transmitter) BACK SMART

(POWER) Turns the TV on or off. Navigation buttons

(up/down/left/right) Scrolls through menus or options. SMART Accesses the Smart Home menu.

/Q.MENU VOL CH

Q.MENU Accesses the Universal Control.

(Depending on country) Accesses the quick menu. Adjusts the volume level.

VOL CH Scrolls through the saved channels.

(MUTE) Mutes all sounds. Registering Magic Remote Control The Magic Remote Control operates by pairing with your TV. Please register the remote as follows. How to register the Magic Remote Control To register automatically, turn the TV on and press the

. When registration is completed, the completion message appears on the screen. If registration fails, turn the TV off and back on, then press the

to complete registration.

(Wheel) How to Re-register the Magic Remote Control BACK SMART 1 Press and hold the BACK and SMART buttons together for 5 seconds to reset, then register it by following How to register the Magic remote control above. 2 To re-register the Magic remote control, press and hold the BACK button for 5 seconds toward the TV. How to use Magic Remote Control 1 You can move the pointer by aiming the Pointer Receiver of the remote control at your TV then move it left, right, up or down.

 If the pointer does not work properly leave the remote control for 10 seconds then use it again. 2 If the pointer disappears, move the remote control slightly to left or right. Then, it will automatically appear on the screen.

 If the pointer has not been used for a certain period of time, it will disappear. MAGIC REMOTE CONTROL FUNCTIONS 37 1 Wheel (OK) on the If you press Magic remote control, the screen appears. Shows information about the current program and screen. 2 You can select My Apps Menu. Precautions to Take when Using the Magic Remote Control

y Use the Magic remote control within the maximum communication distance (10 m, 32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure.

y A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth

(2.4 GHz) as the Magic remote control.

y The Magic remote control may be damaged or may malfunction if it is dropped or receives a heavy impact.

y Take care not to bump into nearby furniture or other people when using the Magic remote control.

y Manufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference.

y It is recommended that an Access Point (AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m (3.28 ft), the Magic remote control may not perform as expected due to frequency interference. E N G L I S H 38 WATCHING TV WATCHING TV Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time. NOTE

y You can also access Initial Setting by accessing OPTION in the main menu. 3 Follow the on-screen instructions to customize your TV settings according to your preferences. Language Selection Environment Selection Time Zone Setting Auto Energy Saving mode Network Connection Select TV watching Type Selects a language to display. Select Home for the home environment. Selects the time zone and daylight saving.

(Depending on country) Select Auto Energy Saving mode. Sets your network to enable network-related features on the TV. Set the TV and set-top box for each watching type.

(Depending on country) E N G L I S H Auto Tuning Scans and saves available channels automatically. Using camera and microphone To use voice and gesture recognition feature, lift up the built-in camera.

(Depending on country) Setting is complete Confirms the setting options. Experience Magic Remote Control Simple guide of Magic Remote Control

(Depending on model) NOTE

y Select Home when prompted. Store mode puts the TV in demo mode.

y If you select Store, the any customized settings will switch back to the default settings of Store in 5 minutes.

y The Standby light feature is disabled in Store Demo mode. 4 When the basic settings are complete, Wheel (OK). press the NOTE

y If you do not complete the Initial setting, it will appear whenever the TV turns on.

y Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. 5 To turn the TV off, press the power button on the remote control. USING THE USER GUIDE 39 USING THE USER GUIDE User Guide allows you to easily access detailed TV information. 1 Press SMART Home menus. button to access the Smart 2 Select User Guide and press the

Wheel

(OK) button. 1 User Guide CHANNEL Setting PICTURE, SOUND Setting OPTION LG SMART Function Advanced Function Information To use input device To set time options To set TV lock options To set language To set caption To set Magic remote control To set other options User Guide 2 3 Index Online User Guide 4 5

(Depending on country) 1 Shows the video you were watching. 2 Guide categories. 3 List of topics in the current category. You can use

button to move between pages. 4 An index of key words present in the User Guide. 5 Provides the detailed information on the functions of LG Smart TV when the Internet is connected.

(It may not be available depending on the country/language.) E N G L I S H OPTION > To set language Settings OPTION Language SMART Selects Menu Language and Audio Language displayed on the screen. Menu Language Audio Language Voice Recognition Language Selects a screen menu language.

[In Digital Mode Only]

Selects the desired language when watching digital broadcasting containing several audio languages Select the language to make voice search

Only the voice search adopted model support this setting. 1 2 Try Now Close Index Online User Guide 1 Shows the description of the selected menu. You can use between pages. to move

2 Moves to the selected menu directly from the User Guide. 40 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement Television System Program Coverage AC 100 - 240 V ~ 50 / 60 Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance 75 Environment condition Operating Temperature 0 C ~ 40 C (32 F ~ 104 F) Operating Humidity Less than 80 %

Storage Temperature

-20 C ~ 60 C (-4 F ~ 140 F) Storage Humidity Less than 85 %

MODELS Dimensions (Width x Height x Depth) Weight With stand Without stand With stand Without stand Current Value / Power consumption MODELS E N G L I S H Dimensions (Width x Height x Depth) Weight With stand Without stand With stand Without stand Current Value / Power consumption MODELS Dimensions (Width x Height x Depth) Weight With stand Without stand With stand Without stand Current Value / Power consumption 55LA9700

(55LA9700-UA) 1,230 x 781 x 274 (mm) 48.4 x 30.7 x 10.7 (inch) 1,230 x 714 x 40.2 (mm) 48.4 x 28.1 x 1.5 (inch) 31 (Kg) (68.3 Ibs) 27.9 (Kg) (61.5 Ibs) 2.8 A / 280 W 65LA9700

(65LA9700-UA) 1,451 x 910 x 325 (mm) 57.1 x 35.8 x 12.7 (inch) 1,451 x 838 x 40.8 (mm) 57.1 x 32.9 x 1.6 (inch) 44.2 (Kg) (97.4 Ibs) 40.6 (Kg) (89.5 Ibs) 3.7 A / 370W 84LA9800

(84LA9800-UA) 1,916 x 1214 x 399 (mm) 75.4 x 47.7 x 15.7 (inch) 1,916 x 1120 x 39.9 (mm) 75.4 x 44.0 x 1.5 (inch) 81.7 (Kg) (180.1 Ibs) 70.4 (Kg) (155.2 Ibs) 5.2 A / 520 W HDMI (DTV) supported mode HDMI (PC) supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) SPECIFICATIONS 37 720 x 480 1280 x 720 1920 x 1080 3840 x 2160 31.469 31.50 44.96 45.00 33.72 33.75 26.97 27.000 33.716 33.75 67.43 67.500 53.95 54 56.25 61.43 67.5 59.94 60.00 59.94 60.00 59.94 60.00 23.97 24.000 29.976 30.00 59.94 60 23.976 24.00 25.00 29.970 30.00 Component supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 480i 720 x 480p 1280 x 720p 1920 x 1080i 1920 x 1080p 3840 x 2160p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.500 54 56.25 67.5 59.94 60.00 59.94 60 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 24.00 25.00 30.00 640 x 480 800 x 600 1024 x 768 1152 x 864 1360 x 768 1280 x 1024 1920 x 1080 3840 x 2160 31.469 37.879 48.363 54.348 47.712 63.981 67.5 54 56.25 67.5 59.94 60.31 60.00 60.053 60.015 60.020 60.00 24.00 25.00 30.00 Wireless LAN module (WN8122E1) specification Standard IEEE802.11a/b/g/n Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 5725 to 5850 MHz 802.11a: 16.5 dBm 802.11b: 16 dBm 802.11g: 15.5 dBm 802.11n - 2.4GHz: 15.5 dBm 802.11n - 5GHz: 16.5 dBm E N G L I S H y Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. y Contains FCC ID: BEJWN8122E1 Contains IC: 2703H-WN8122E1 Bluetooth module (BM-LDS401) specification Standard Bluetooth Version 3.0 Frequency Range 2400 ~ 2483.5 MHz Output Power (Max.) 10 dBm or lower Component port connecting information y Contains FCC ID: BEJLDS401 Contains IC: 2703H-LDS401 Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr 42 SPECIFICATIONS 3D supported mode

y Video, which is input as below media contents is switched into the 3D screen automatically. 3D supported mode automatically Input Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) Playable 3D video format 1080p 1080i 720p 480p 54.00 67.50 27.00 33.75 67.50 67.50 33.75 90.00 45.00 63.00 31.50 1080p 33.75 HDMI USB DLNA 24 30 24 30 60 60 30 F/P, L/A S/S, T&B, S/S Full S/S, T&B F/P, F/A S/S, T&B, S/S Full F/P, L/A S/S, T&B, S/S Full F/P, L/A T/B, S/S, S/S Full S/S, T&B, C/B, MPO(Photo) S/S : Side by Side, S/S Full : Side by Side Full, S/S Half :Side by Side Half, T/B : Top & Bottom, F/P : Frame Packing, F/A : Field Alternative, L/A : Line Alternative, C/B : Checker Board, R/I : Row Interleaving, C/I: Column Interleaving, F/S : Single Frame Sequential E N G L I S H SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP 43 3D supported mode manually Signal Playable 3D video format

1080p Others Interlace Progressive 704 x 480p (Over) 704 x 480i (Over) 704 x 480 (Under) 320 x 240 (Over) 320 x 240 (Under) 1024 x 768p 1280 x 720p 1920 x 1080p Others 2D to 3D, S/S, T&B 2D to 3D, S/S, T&B, C/B, R/I, C/I

(60Hz : F/S) 2D to 3D, S/S, T&B 2D to 3D, S/S, T&B 2D to 3D, S/S, T&B, C/B, R/I, C/I

(60Hz : F/S ) 2D to 3D, S/S, T&B, C/B, R/I, C/I

(60Hz : F/S ) 2D to 3D, S/S, T&B 2D to 3D 2D to 3D, S/S, T&B 2D to 3D 2D to 3D, S/S, T&B 2D to 3D E N G L I S H Input TV ATV(CVBS) Component HDMI-PC HDMI-DTV USB / DLNA

(Movie) USB / DLNA

(Photo) Miracast /

WiDi EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit www.lg.com. 44 MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. CAUTION

y Before cleaning, turn the power off and disconnect the power cord and all other cables.

y When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, Frame, Cabinet and Stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTION

y Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.

y Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners or lubricants, as these may damage the screens finish and cause discoloration.

y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. Power Cord Remove the accumulated dust or dirt on the power cord regularly. TROUBLESHOOTING Problem Solution Cannot control the TV with the remote control. No image display and no sound is produced. The TV turns off suddenly.

y Check the remote control sensor on the product and try again.

y Check if there is any obstacle between the product and the remote control.

y Check if the batteries are still working and properly installed (

to

, to

y Check if the product is turned on.

y Check if the power cord is connected to a wall outlet.

y Check if there is a problem in the wall outlet by connecting other products.

y Check the power control settings. The power supply may be interrupted.

y Check if the Auto sleep feature is activated in the Time settings.

y If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. E N G L I S H CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE y The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturers recommendations. y Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury. THIS MANUFACURER CARES!

y The consumer electronics industry is committed to making home entertainment enjoyable and safe. TUNE INTO SAFETY y O n e s i z e d o e s N O T f i t a l l . F o l l o w t h e m a n u f a c t u r e r s recommendations for the safe installation and use of your flat panel display. y Carefully read and understand all enclosed instructions for proper use of this product. y Dont allow children to climb on or play with furniture and television sets. y Dont allow place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers. y Remember that children can become excited while watching a program, especially on a larger than life flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down. y Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children. WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

y Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory

(such as UL, CSA, ETL). y Follow all instructions supplied by the display and wall mount manufacturers. y If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation. y Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer. y A m i n i m u m o f t w o p e o p l e a r e r e q u i r e d f o r i n s t a l l a t i o n . Flat panel displays can be heavy LG Customer Information Center The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL For inquires or comments, visit www.lg.com or call;

1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA Register your product Online!

www.lg.com