FCC ID: BEJTM13LNCAHK1 LTE Module

by: LG Electronics USA latest update: 2018-12-07 model: TM13LNCAHK1

One grant has been issued under this FCC ID on 12/07/2018 (this is one of eighty-nine releases in 2018 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked warrantee terms, instructions, password defaults, troubleshooting guides, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 17
1 ~ 2018-12-07 17

app s				submitted / available
1	User Manual	Users Manual	pdf	518.20 KiB	July 12 2018 / May 06 2019
1		Cover Letter(s)	pdf		July 12 2018
1	Block Diagram	Block Diagram	pdf		December 07 2018	confidential
1		Cover Letter(s)	pdf		July 12 2018
1		External Photos	pdf		July 12 2018 / May 06 2019
1		Internal Photos	pdf		July 12 2018 / May 06 2019
1		ID Label/Location Info	pdf		July 12 2018
1		Cover Letter(s)	pdf		July 12 2018
1	Operational Description	Operational Description	pdf		December 07 2018	confidential
1	Scehmatics	Schematics	pdf		December 07 2018	confidential
1		Test Report	pdf		July 12 2018
1		Test Report	pdf		July 12 2018
1		Test Report	pdf		July 12 2018
1		Test Report	pdf		July 12 2018
1		Test Report	pdf		July 12 2018
1		Test Setup Photos	pdf		July 12 2018 / May 06 2019
1	Tune Up Procedure	Parts List/Tune Up Info	pdf		December 07 2018	confidential

exhibit
download
text

User Manual

Users Manual

pdf

518.20 KiB

July 12 2018 / May 06 2019

Technical Specification

(TM13LNCAHK1) 1/10 History Ver. 1.0 Date 2018.06.12 Contents Written by Checked by Approved by Note 2/10 Contents 1. Product Introduction..................................................................................................... 4 1.1 Block Diagram .................................................................................................... 5 1.2 Environmental Specifications .............................................................................. 5 1.3 Electrical Specifications ...................................................................................... 5 1.3.1 Absolute Maximum and ESD Ratings ........................................................... 5 1.3.2 Current Consumption ................................................................................... 6 1.4 Mechanical Specifications ................................................................................. 6 1.4.1 Physical Dimensions and Connection Interface ........................................... 6 1.4.2 Mechanical Drawing ..................................................................................... 7 2. Pin Definitions.............................................................................................................. 8 3 RF Specification ........................................................................................................... 9 3.1. LTE B2,B4, B5,B7,B12,B17 Specification .......................................................... 9 3.2. WCDMA B2, B5 Specification.. 10 3/10 1. Product Introuction The TM13LNCAHK1 are designed for the automotive industry. They support LTE and CDMA air Interface standards. The TM13LNCAHK1 are based on the Qualcomm MDM9628 wireless chipsets and support the following bands. Table 1. Supported Band Region US LTE B2/B4/B5/B7/B12

/B17 Band WCDMA B2/B5 1.1 Block Diagram Figure 1.1. TM13LNCAHK1 Block diagram 4/10 1.2 Environmental Specifications The environmental specification for operating and storage of the TM13LNCAHK1 are defined in the the table below. Table 2. Environmental Specifications Parameter Operating Temperature Storage Temperature Humidity Temperature Range

-40 to 85

-40 to +90 95% or less 1.3 Electrical Specifications This section provides details for some of the key electrical specifications of the TM13LNCAHK1 embedded modules. 1.3.1 Absolute Maximum Rating and ESD Ratings This section defines the Absolute Maximum and Electrostatic Discharge (ESD) Ratings of the TM13LNCAHK1 embedded modules. Warning: If these parameters are exceeded, even momentarily, damage may occur to the device. Table 3. Absolute Maximum Ratings Parameter

+4.0_VPWR Power Supply Input VIN ESD Ratings ESD1) Voltage on any digital input or output pin VREG_MDME+0.5 Max 4.4V Units Min V V kV 10

Primary, Diversity antenna pads Contact 1) The ESD Simulator configured with 330pF, 2000. Caution: The TM13LNCAHK1 embedded modules are sensitive to Electrostatic Discharge. ESD countermeasures and handling methods must be used when handling the TM13LNCAHK1 devices. 5/10 LTE 1.3.2 Current Consumption Table 4. TM13LNCAHK1 Current Consumption (TBD) Mode Parameter Band2/4/7/12/17, Max TX Output /Full RB Band5, Max TX Output /Full RB Band5 Band2 Idle, Registered Idle, Registered Sleep Mode, Average Current WCDMA Sleep Mode, Average Current WCDMA WCDMA LTE LTE Typical Max 650 600 550 600 600 550 650 600 1.8 2.2 2.2 1.8 2.2 1.8 1.8 2.2 Units mA mA mA mA mA mA 1.4 Mechanical Specifications 1.4.1 Physical Dimensions and Connection Interface The TM13LNCAHK1 embedded modules are a Land Grid Array (LGA) form factor device. The device does not have a System or RF connectors. All electrical and mechanical connections are made via the 323 pad TM13LNCAHK1 on the underside of the PCB. Table5. TM13LNNAHK1 Embedded Module Dimensions Parameter Overall Dimension Overall Module Height PCB Thickness Flatness Specification Weight Max 34.35 x 40.35 3.85 1.1 0.1 TBD Nominal 34 x 40 3.5 1.0 12 Units mm mm mm mm g 6/10 1.4.2 Mechanical Drawing 1.4.2.1 Module PCB 40 mm 34 2. Pin Definitions 2.1 PIN Definitions HMC_MDM9628 module_Pinmap.xls 7/10 3. RF Specification The specifications for the LTE and CDMA interfaces are defined. TM13LNCAHK1 is designed to be compliant with the standard shown in the table below. Table20. Standards Compliance Technology LTE WCDMA 3.1 LTE B2,B4,B5,B7,B12,B17 Specification 3.1.1 LTE TX Output Power The Maximum / Minimum Transmitter Output Power of the TM13LNCAHK1 are specified in the following table. Table21. Conducted TX (Transmit) Max output Power Tolerances LTE Bands Standards 3GPP Release 8 3GPP Release 9 BAND BAND2 UE Maximum Output Power BAND4 UE Maximum Output Power BAND5 UE Maximum Output Power BAND7 UE Maximum Output Power BAND12 UE Maximum Output Power Method (UL CH) Measure Max and Min and Min Transmit Power of Low Channel (18650) Measure Max and Min Transmit Power of Mid Channel (18900) Measure Max and Min Transmit Power of High Channel (19150) Measure Max and Min and Min Transmit Power of Low Channel (20000) Measure Max and Min Transmit Power of Mid Channel (20175) Measure Max and Min Transmit Power of High Channel (20350) Measure Max and Min and Min Transmit Power of Low Channel (20450) Measure Max and Min Transmit Power of Mid Channel (20525) Measure Max and Min Transmit Power of High Channel (20600) Measure Max and Min and Min Transmit Power of Low Channel (20800) Measure Max and Min Transmit Power of Mid Channel (21100) Measure Max and Min Transmit Power of High Channel (21400) Measure Max and Min and Min Transmit Power of Low Channel (23060) Measure Max and Min Transmit Power of Mid Channel (23095) Measure Max and Min Transmit Power of High Channel (23130) Specification Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm 8/10 BAND17 UE Maximum Output Power Measure Max and Min and Min Transmit Power of Low Channel (23780) Measure Max and Min Transmit Power of Mid Channel (23790) Measure Max and Min Transmit Power of High Channel (23800) Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm Max Power : 20.3~25.7dBm Min Power : -39dBm 3.1.2 LTE RX Sensitivity The Receiver Sensitivity of the TM13LNCAHK1 are specified in the following table. Table22. Conducted RX (Receive) Sensitivity LTE Bands BAND Method (DL CH) BAND2 Reference sensitivity level(DUAL) BAND4 Reference sensitivity level(DUAL) BAND5 Reference sensitivity level(DUAL) BAND7 Reference sensitivity level(DUAL) BAND12 Reference sensitivity level(DUAL) BAND17 Reference sensitivity level(DUAL) Measure BLER of Low Channel (650) Measure BLER of Mid Channel (900) Measure BLER of High Channel (1150) Measure BLER of Low Channel (2000) Measure BLER of Mid Channel (2175) Measure BLER of High Channel (2350) Measure BLER of Low Channel (2450) Measure BLER of Mid Channel (2525) Measure BLER of High Channel (2600) Measure BLER of Low Channel (2800) Measure BLER of Mid Channel (3100) Measure BLER of High Channel (3400) Measure BLER of Low Channel (5060) Measure BLER of Mid Channel (5095) Measure BLER of High Channel (5130) Measure BLER of Low Channel (5780) Measure BLER of Mid Channel (5790) Measure BLER of High Channel (5800) Specification sensitivity : -95 BLER : 5%

sensitivity : -95 BLER : 5%

sensitivity : -97 BLER : 5%

sensitivity : -95 BLER : 5%

sensitivity : -94 BLER : 5%

3.2 WCDMA B2/B5 Specification 3.2.1 WCDMA TX Output Power The Maximum Transmitter Output Power of the TM13LNCAHK1 are specified in the following table. 9/10 Table23. Conducted TX (Transmit) Max output Power Tolerances WCDMA Bands Item Method (DL CH) WCDMA B2 Power Level WCDMA B5 Power Level Measure Max Transmit Power of Low Channel

(CH= 9263) Measure Max Transmit Power of Middle Channel

(CH= 9400) Measure Max Transmit Power of High Channel

(CH= 9537) Measure Max Transmit Power of Low Channel

(CH=4133) Measure Max Transmit Power of Middle Channel

(CH=4175) Measure Max Transmit Power of High Channel

(CH=4232) Specification Max Power : 20.3~25.7dBm Max Power : 20.3~25.7dBm Max Power : 20.3~25.7dBm Max Power : 20.3~25.7dBm Max Power : 20.3~25.7dBm Max Power : 20.3~25.7dBm 3.2.2 WCDMA RX Sensitivity The Receiver Sensitivity of the TM13LNCAHK1 are specified in the following table. Table24. Conducted RX (Receive) Sensitivity WCDMA Bands Item Method (DL CH) WCDMA B2 Power Level WCDMA B5 Power Level Measure BER of Low Channel (CH= 9663) Measure BER of Low Channel (CH= 9800) Measure BER of Low Channel (CH= 9937) Measure BER of Low Channel (CH=4358) Measure BER of Low Channel (CH=4400) Measure BER of Low Channel (CH=4457) Specification 0.1% @-106dBm 0.1% @-106dBm 0.1% @-106dBm 0.1% @-106dBm 0.1% @-106dBm 0.1% @-106dBm 10/10 FCC Warning Statement FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC ID : BEJTM13LNCAHK1 any similar wording that expresses the same meaning may be used. Manual Information to the End User The module is limited to OEM installation ONLY. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. The module is limited to installation in mobile application;

A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations. There is requirement that the grantee provide guidance to the host manufacturer for compliance with Part 15B requirements. Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mmesi le brouillage est susceptible d'en compromettre le fonctionnement. Please notice that if the IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains IC: 2703H-TM13LNCAHK1 any similar wording that expresses the same meaning may be used. Ltiquette dhomologation dun module dInnovation, Sciences et Dveloppement conomique Canada devra tre pose sur le produit hte un endroit bien en vue, en tout temps. En labsence dtiquette, le produit hte doit porter une tiquette sur laquelle figure le numro dhomologation du module dInnovation, Sciences et Dveloppement conomique Canada, prcd du mot contient , ou dune formulation similaire allant dans le mme sens et qui va comme suit :

Contient IC : 2703H-TM13LNCAHK1 est le numro dhomologation du module Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as shown in this manual. FCC and IC RF Radiation Exposure Statement: This equipment complies with FCC and IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. RF du FCC et IC d'exposition aux radiations: Cet quipement est conforme l'exposition de FCC et IC rayonnements RF limites -tablies pour un environnement non contrl. Lantenne pour ce transmetteur ne doit pas tre mme endroit avec dautres metteur sauf conformment FCC et IC procdures de produits Multi-

metteur. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps.

		frequency	equipment class	purpose
1	2018-12-07	2500 ~ 2570	PCB - PCS Licensed Transmitter	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2018-12-07
1	Applicant's complete, legal business name	LG Electronics USA
1	FCC Registration Number (FRN)	0023476120
1	Physical Address	1000 Sylvan Avenue
1		Englewood Cliffs, New Jersey 07632
1		United States

app s	TCB Information
1	TCB Application Email Address	u******@sgs.com
1	TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

app s	FCC ID
1	Grantee Code	BEJ
1	Equipment Product Code	TM13LNCAHK1

app s	Person at the applicant's address to receive grant or for contact
1	Name	K** H**
1	Title	Director, Standards & Compliance
1	Telephone Number	201-4********
1	Fax Number	201-8********
1	E-mail	k******@lge.com

app s	Technical Contact
1	Firm Name	SGS Korea Co., Ltd
1	Name	H** Y******
1	Physical Address	4, LS-ro, 182 beon-gil
1		Gunpo-si, 15807
1		South Korea
1	Telephone Number	82314********
1	Fax Number	82704********
1	E-mail	h******@sgs.com

app s	Non Technical Contact
1	Firm Name	SGS Korea Co., Ltd
1	Name	Y**** K****
1	Physical Address	4, LS-ro, 182 beon-gil
1		Gunpo-si, 15807
1		South Korea
1	Telephone Number	82314********
1	Fax Number	82704********
1	E-mail	y******@sgs.com

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	06/05/2019
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	PCB - PCS Licensed Transmitter
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	LTE Module
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Does not apply
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Single Modular Approval. Power out listed is ERP for below 1GHz or EIRP for above 1GHz. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed 3.12 dBi at 1900 MHz; 2.4 dBi at 1700 MHz; 4.16dBi at 850 MHz; 0.23 dBi at 2500MHz; 1.17 dBi at 700MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2 and 4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5 and 12; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7; 5 MHz and 10 MHz bandwidth modes for LTE Band 17.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	SGS Korea Co., Ltd
1	Name	J**** C**
1	Telephone Number	82-31********
1	Fax Number	+82-3********
1	E-mail	K******@sgs.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	24E		1850	1910	0.178	2.5 ppm	4M12F9W
1	2	22H		824	849	0.189	2.5 ppm	4M14F9W
1	3	24E		1850	1910	0.303	2.5 ppm	1M10G7D
1	4	24E		1850	1910	0.265	2.5 ppm	17M9G7D
1	5	24E		1850	1910	0.237	2.5 ppm	17M9W7D
1	6	27		1710	1755	0.153	2.5 ppm	8M94G7D
1	7	27		1710	1755	0.116	2.5 ppm	17M9G7D
1	8	27		1710	1755	0.099	2.5 ppm	17M9W7D
1	9	22H		824	849	0.181	2.5 ppm	4M52G7D
1	1	22H		824	849	0.179	2.5 ppm	8M92G7D
1	11	22H		824	849	0.152	2.5 ppm	8M94W7D
1	12	27		2500	2570	0.104	2.5 ppm	4M52G7D
1	13	27		2500	2570	0.098	2.5 ppm	17M9G7D
1	14	27		2500	2570	0.082	2.5 ppm	17M9W7D
1	15	27		699	716	0.151	2.5 ppm	4M52G7D
1	16	27		699	716	0.159	2.5 ppm	8M94G7D
1	17	27		699	716	0.127	2.5 ppm	8M94W7D
1	18	27		704	716	0.156	2.5 ppm	4M52G7D
1	19	27		704	716	0.173	2.5 ppm	8M97G7D
1	2	27		704	716	0.143	2.5 ppm	8M97W7D

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2AR2STAH6509 MMD Hong Kong Holding Limited A3LSMM356B Samsung Electronics Co Ltd 2A5XO-BY969D Shenzhen Boyi Electronics Co., Ltd. SQG-MT3202230 Ezurio LLC 2AX4YT30MAX Shenzhen DOOGEE Hengtong Technology CO.,LTD