FCC ID: BEJMR24GN Magic Remote

Magic Remote User Information Model Name : MR24GN English Table of Contents 1. Overview and specification of the remote control

(1) Overview

(2) Specification 2. Precautions 3. Customer Support 1. Overview and Specifications for the Remote Control

(1) Overview

- Instructions for using the Premium Magic Remote control are in the TV manual. this remote uses RF(Radio Frequency) instead of IR (InfaRed light). this remote will operate within 10m of the tv and does not require it be pointed at the tv.(voice recognition support)

(2) Specifications Categories Details Model No. MR24GN Range of frequency 2.402 GHz ~ 2.480 GHz NFC frequency 13.56MHz (NFC is only using TAG) Output Power(Max.) 8dBm (EIRP) Channel 40 channels Power source AA 1.5 V, 2 alkaline batteries are used Operational temperature range 0 ~ 40

"This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum"

2. Precautions

(1) After replacement of the battery, use the remote control following pairing in accordance with user manual.

(2) If the unit does not operate after replacement of battery, reattempt pairing in accordance with the user manual.

(3) If the remote controller is not being used for prolonged period of time, it is recommended you remove the battery from the unit.

(4) Do not dismantle or exert heat to the battery.

(5) Do not drop battery or exert extreme impact that may even cause the case to be damaged.

(6) Do not immerse the battery in water.

(7) There is danger of explosion if a the battery is inserted reversely.

(8) Properly dispose of used batteries.

(9) Open the battery cover to find the label. 3. Customer Support Refer to the contact number for services provided in the TV Manual. Federal Communications Commission(FCC) Statement Federal Communications Commission(FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment and For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance. Industry Canada Statement

[English]

Industry Canada Statement

(For Canada) This device complies with Industry Canadas licence-exempt RSS Stadard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Avis d'industrie canada Cet appareil est conforme aux normes CNR dIndustrie Canada applicables aux dispositifs exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) 2) lappareil ne doit pas produire de brouillage;

lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement

(For Canada) This equipment complies with IC radiation exposure limits set forth for an Uncontrolled environment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.

[French]

Avis d'Industrie Canada

(Pour le Canada) Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) 2) lappareil ne doit pas produire de brouillage;

lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Avis dIndustrie Canada sur lexposition aux rayonnements Avis d'industrie canada

(Pour le Canada) Cet appareil est conforme aux limites dexposition aux rayonnements dIndustrie Canada pour un environnement non contrl. REMARQUE : LE FABRICANT NEST PAS RESPONSABLE DES INTERFRENCES RADIOLECTRIQUES CAUSES PAR DES MODIFICATIONS NON AUTORISES APPORTES CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT ANNULER LAUTORISATION ACCORDE LUTILISATEUR DE FAIRE FONCTIONNER LAPPAREIL. Conformity Notice :

1) Certification Marking

[ENGLISH]

Hereby, LG Electronics declares that the radio equipment type

[Magic Remote] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://www.lg.com/global/support/cedoc/cedoc#

LG Electronics European Shared Service Center B.V. Krijgsman 1 1186 DM Amstelveen The Netherlands Wireless function S/W Version: 1.0.192.2 H/W Version: HSP-C002AH/PMCFA1616A 2) UKCA Statement SIMPLIFIED UK DECLARATION OF CONFORMITY Hereby, LG Electronics declares that the radio equipment type

[MR24GN] is in compliance with the relevant statutory require-

ments. The full text of the UK declaration of conformity is available at the following internet address :

http://www.lg.com/global/support/cedoc/cedoc#

UK Importer: LG Electronics U.K. Ltd Address: Velocity 2, Brooklands Drive, Weybridge, KT13 0SL

MR24GN Label size, position MR24GN Label size SIZE : 15.5 X 30.5 MR24GN Label position Label position FCC ID: BEJMR24GN IC: 2703H-MR24GN

Date:

June 28, 2023 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern:

Subject : FCC Agent Authorization Letter for FCC ID :BEJMR24GN We, the undersigned, hereby authorize HCT CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO., LTD. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. This authorization is valid until further written notice from the applicant. Sincerely, Signed by:

_________________________ Heejae Cho

(Name)

(Title)

(Email Address)

(Phone number) heejae.cho@lge.com 201-470-2696 Director, Regulatory and Environmental Affairs

(Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States

Date:

June 28, 2023 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT: Request for Confidentiality for FCC ID: BEJMR24GN We hereby request confidential treatment of the information accompanying this application as outlined below:

LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description LONG-TERM CONFIDENTIAL SHORT-TERM CONFIDENTIAL

(180 DAYS) 1 2 3 4 5 6 7 8 Block Diagram Operational Description Parts List Schematics External Photos Internal Photos Test-Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signed by:

(Name)

(Title) Heejae Cho Director, Regulatory and Environmental Affairs

(Email Address) heejae.cho@lge.com

(Phone number) 201-470-2696

(Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States