Date : Jul. 16, 2018
Rev : 3.2
Modular Approval
Declaration Letter
HACS-F007
Modular Approval
Declaration Letter
HCT America LLC
(TCB@hctamerica.com)
1726 Ringwood Ave., San Jose, CA 95131
TEL: +1.510.933.8848, Fax: +1.510.933.8849
Page 1 of 2
This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the
controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be
forwarded or reproduced in whole or in part without written permissions from HCT America LLC
Date : Jul. 16, 2018
Rev : 3.2
REVISION TABLE
Rev
1.0
2.0
2.1
3.0
3.1
3.2
Description of Change
Original Release(Obsolete)
Updated Template(Obsolete)
Updated address (Obsolete)
Updated Template(Obsolete)
Updated Address
Changed File Name and Split Files FCC/IC
Date
Approved
06/14/2012
10/01/2012
01/10/2014
03/30/2015
06/21/2018
7/16/2018
QM
QM
QM
QM
QM
QM
HACS-F007
Modular Approval
Declaration Letter
HCT America LLC
(TCB@hctamerica.com)
1726 Ringwood Ave., San Jose, CA 95131
TEL: +1.510.933.8848, Fax: +1.510.933.8849
Page 2 of 2
This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the
controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be
forwarded or reproduced in whole or in part without written permissions from HCT America LLC
Date : August 16, 2022
LG Electronics USA
FCC Modular Approval Attestation
FCC ID: BEJ-LCWB-003 is seeking FCC equipment authorization as
Single Modular Transmitter
Single Limited Modular Transmitter
Product Information
Product Description:
RF Module
FRN:
0023476120
Model Name(s):
LCWB-003
FCC Product ID:
FCC Module ID:
-
BEJ-LCWB003
Modular Checklist/Information
For Modular Approval, the module shall meet all the requirements listed below. Please check () if
the module complies with the stated requirement.
The modular transmitter must have its own shielding.
The modular transmitter must have buffered modulation/data inputs.
The modular transmitter must have its own power supply regulation.
The modular transmitter must comply with the antenna requirements of section 15.203 and
15.204(c).
The modular transmitter must tested in a stand-alone configuration.
The modular transmitter must be labeled with its own FCC ID number.
The modular transmitter must comply with any specific rule or operating requirements applicable
to the transmitter and the manufacturer must provide adequate instruction along with the module to
explain any such requirements.
The modular transmitter must comply with any applicable RF exposure requirements.
If a module(s) does NOT meet one or more of the above listed requirements, the applicant may
request Limited Modular Approval (LMA). For LMA, please state details about why the above
requirement(s) could not be met; and state how control of the end product, into which the module
will be installed, will be maintained by the applicant / manufacturer, such that full compliance of the
end product is always ensured:
((Name / Title) Sung Soo Kim / Director, Regulatory and Environmental Affairs
(Email Address) sungsoo.kim@lge.com
(Phone number) 201-266-2215
(Address) LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood
Cliffs, New Jersey 07632, United States
HACS-F007-1 FCC Modular Approval Declaration Letter
Rev : 3.2