SPECIFICATIONS PRODUCT NAME : BLE Module MODEL NAME : ETWBCLDC01(LGIT), LGSBT12(LGE) The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek. Designed Checked Approved Y.U.JEONG I.H. PARK S.D. CHOI LG Innotek Co., Ltd. DOCUMENT No. 2021-PLM-D013 2021.02.03 2021.02.03 2021.02.03 PAGE 14
(00)-0073 REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
1 / 14 DOCUMENT No :
2021-PLM-D013 Page 2 2 2 3 3 4 4 5 6 7 8 9 10 11 12 13 14 Index No Description Features 1 3 4 5 7 8 9 2 Ordering Information Label Marking Block Diagram Absolute Maximum Ratings 6 Operating Conditions Standard Test Conditions Electrical Specifications for BLE Environment Tests 10 Life Test Conditions 11 Pin Description 12 Test Method 13 Mechanical Characteristics 14 Outline Drawing 15 LG CI Specification 16 Packing Information 17 Change History of Revision Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
2 / 14 DOCUMENT No :
2021-PLM-D013 1. Features ETWBCLDC01 is the small size and low power module for BLE on TV ETWBCLDC01 is based on Nordic nRF52820 solution. Main specification
- BT5.1 LE, single band (2.4GHz), 1T1R
- Main chipset: Nordic nRF52820 Customer requirement
- Size: 40 x 27 mm
- Host interface: SPI
- Antenna: Metal press antenna
- Certification: FCC, IC, CE, KC, RCM
- 2ea 1set (display + box pairing) 2. Ordering Information Model Description ETWBCLDC01 BLE for LGE TV 3. Label marking EAT65179501 ETWBCLDC01 2103A020110 010000010000 Customer P/N : EAT65179501 Product Lot No. : ex)2103A020110 Model No. : ETWBCLDC01 21 : Year 02 : Date Serial Number QR code 03 : Month 01: Manufactured Process Serial Number A : Lot No 10 : Change history of Revision Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
3 / 14 DOCUMENT No :
2021-PLM-D013 4. Block Diagram ANT nRF52820 MCU
(Cortex M4) Flash 256KB BLE5.1 MAC/BB Interface Block SPI i 1 4 P n C o n n e c t o r SRAM 32KB PMU 3.3V Clock (32MHz) 5. Absolute Maximum Ratings Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. Parameter Storage Temperature Storage Humidity (40)
. Other conditions Min
-20
< Table 1 >
Max
+80 90 Unit
1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40 and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
4 / 14 DOCUMENT No :
2021-PLM-D013 6. Operating Conditions Parameter Min Typ Max Ambient Temperature Ambient Humidity (40) 0
Supply Voltage 3.135 3.3 60 85 3.6 Unit
Vdc 7. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. 7-1. Ambient condition 7-2. Power supply voltages Temperature Humidity Input power VDD_3.3V 25 5 65 5%
Supply Voltage 3.135 ~ 3.6V 7-3. Current consumption Current Consumption Min. Typ. Max. TX Mode Idle and Associated state
12 4 25 Note 1 : This figure is the RMS(root mean square) Value. 7-4. ESD Information Human Body Model (HBM) Min. Contact Air Note 1 : IEC 61000-4-2 (150pF, 330R) Copyright. 2021. All Rights Reserved. Max. 4 15
Unit mA Unit kV REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
5 / 14 DOCUMENT No :
2021-PLM-D013 8. Electrical Specifications for BLE 8-1. RF Characteristics for BLE PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Receiver sensitivity 1 Mbps BLE ideal transmitter, Packet length<=255 bytes, BER=
0.1%
Maximum output power Conducted Test
4
-90
-80 CTQ dBm 7 8 dBm CTQ Modulation Characteristics 1 Mbps BLE delta F1 average 225 250 275 kHz ratio(delta F2/delta F1 ) 80
* Normal Condition : 25, VDD=3.3V. Note 1. This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. Note 2. The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details. Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
6 / 14 DOCUMENT No :
2021-PLM-D013 9. Environment Tests Item Test Conditions Specifications Heat Load Test Humidity Load Test Heat Test Cold Test Initial values are measured at standard test condition. Leave samples in 603 for 2005 hours, and in standard test condition for 30 minutes, then take measurements within 2 hour.
- Supply voltage : standard 5%
Initial values are measured at standard test condition. Leave samples in 403, 95% RH for 96 5 hours, and in standard test condition for 30 minutes, then take measurements within 2 hour.
- Supply voltage : standard + 5%
Initial values are measured at standard test condition. Leave samples in 702 for 96 5 hours, and in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. TX Power
: 4dB Max Initial values are measured at standard test condition. Leave samples in 252 for 96 5 hours, and Min Input Level
: 4dB Max in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. Take measurements in standard test condition. Temperature Shock Temp. : -45 ~ +125 Duration : 30 min Ramp-up & Ramp-down for 5 min Cycle : 200cycle. Vibration Test Initial value measure at standard test condition. Sweep rate : 1 single sweep/ minute Amplitude : 1.5 mm Frequency : 10-55Hz Duration : 1 Hours per direction (X,Y,Z) Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
7 / 14 DOCUMENT No :
2021-PLM-D013 10. Life Test Conditions Main Content MTBF(B1) : 60,000Hrs @ Ambient 25 Judgment : TX Power : 4dB Max item Life Time Life Calculation Test Condition B1 Life : 63,842Hours Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
8 / 14 DOCUMENT No :
2021-PLM-D013 11. Pin Description Pin No. Pin Name Pin Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VCC BT_SCL(Uart Tx) BT_SDA(Uart Rx) GND Key_DET VCC BDP_DET GND NRESET IR_DET BLE_FW_MODE BLE_CHECK_MODE GPIO_PREPARE_A GPIO_PREPARE_B I/O I/O I/O I
I I I
I I I I I/O I/O VDD 3.3V SPI_SCL SPI_SDA GND BT_Wake up VDD 3.3V BDP_DET GND Reset IR_DET FW MODE CHECK_MODE Spare GPIO Spare GPIO Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 MODEL NAME : ETWBCLDC01 (LGIT) LGSBT12(LGE) PAGE :
9 / 14 DOCUMENT No :
2021-PLM-D013 12. Test method This is a conducted test method of WiFi RF performance. 1) Test Condition. LAN Cable LitePoint IQxel l e b a C F R r o t a u n a t t A Auto test Program Cable Power 5V TESCOM Shield Box
( TC-5910DP) Power Supply 2) Test Set-up List.
- Instrument : LitePoint IQxel
- Shield Box : Tescom TC-5910DP
- RF Cable : TESCOM 4011-0011
- Attenuator : Mini-Circuit 15542 10dB attenuator
- USB Cable, LAN Cable, Murata RF Cable : MXHT83QE3000 or MXHS83QE3000
- Power Supply 3) Test Flow
- Install the test set-up.
- Power OFF.
- Open the Shield box and install the DUT for test.
- Close the shield box.
- Power ON.
- Check the driver icon.
- Start testing.
#. Notes.
- Be careful that you can consider a RF cable LOSS. Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
10 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 13. Mechanical Characteristics 1) Outline view Item Test Conditions Assembly No defects of wiring, soldering and assembling Appearance No dirt, rust, corrosion or foreign material 2) Appearance structure Item Test Conditions Dimension As assembly drawing Mounting As assembly drawing Weight 4.45g Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
11 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 14. Outline Drawing Copyright. 2021. All Rights Reserved. 3D ViewK.S Lee'21. 03. 02Y.U JeongS.D Chol'21. 03. 02'21. 03. 02 REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
12 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 15. LG CI Specification. LG CI regulation LG CI print in Carton box Logo Ratio 1 : 0.65 Logo Type Color -- Black Planar figure of Carton box Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
13 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 16. Packing Information Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
14 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 17. Change History of Revision Revision Date Contents of Revision Change 1.0 21.02.03 First release Remark Y.U.Jeong Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
15 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 Regulatory Statement (FCC) Part 15.19 Statement cause undesired operation. Part 15.105 Statement (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Part 15.21 Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Responsible Party Information (Supplier's Declaration of Conformity) LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs New Jersey, United States, 07632 Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
16 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 Regulatory Statement (FCC) Regulatory notice to host manufacturer according to KDB 996369 D03 OEM Manual v01 List of applicable FCC rules
- FCC Rule parts 15C(15.247) This module has been granted modular approval as below listed FCC rule parts. Summarize the specific operational use conditions The OEM integrator should use equivalent antennas which is the same type and equal or less gain then an antenna listed in this instruction manual. RF exposure considerations under the following condition:
The module has been certified for integration into products only by OEM integrators
-The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times.
-The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
-Mobile use required. As long as the three conditions above are met, further transmitter testing will not be OEM integrators should provide the minimum separation distance to end users in their end-product manuals. Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
17 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 Regulatory Statement (FCC) Antennas list This module is certified with the following integrated antenna.
-Type: Metal Press Antenna
-Max. peak Antenna gain Frequency 2402 ~ 2480 MHz BT Ant(dB) 1.50 Any new antenna type, higher gain than listed antenna should be met the requirements of FCC rule 15.203 and 2.1043 as permissive change procedure. Label and compliance information End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
Contains FCC ID: BEJLGSBT12 Contains IC: 2703H-LGSBT12 Information on test modes and additional testing requirements for any additional OEM integrator is still responsible for testing their end-product compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, additional transmitter in the host, etc.). Additional testing, Part 15 Subpart B disclaimer The final host product also requires Part 15 subpart B compliance testing with the modular transmitter installed to be properly authorized for operation as a Part 15 digital device. Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
18 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 Regulatory Statement (ISED) RSS-GEN, Sec. 7.1.3(licence-exempt radio apparatus) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna or transmitter. l'exposition aux RF Lantenne (ou les antennes) doit tre installe de faon maintenir tout instant une distance minimum de au moins 20 cm entre la source de radiation (lantenne) et toute personne physique. tiquetage du produit final (IC) Le module LGSBT12 est tiquet avec sa propre identification FCC et son propre numro de certification IC. Si lidentification FCC et le numro de certification IC ne sont pas visibles lorsque le module est install lintrieur dun autre dispositif, la partie externe du dispositif dans lequel le module est install devra galement prsenter une tiquette faisant rfrence au module inclus. Dans ce cas, le produit final devra tre tiquet sur une zone visible avec les informations suivantes :
Contient module metteur identification FCC ID: BEJLGSBT12 Contient module metteur IC : 2703H-LGSBT12 Copyright. 2021. All Rights Reserved. REG. DATE : 2021.02.03 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2021.02.03 LGSBT12(LGE) PAGE :
19 / 14 MODEL NAME : ETWBCLDC01 (LGIT) DOCUMENT No :
2021-PLM-D013 4. CE Statement Simplified EU Declaration of Conformity Hereby, LG Electronics Inc. declares that the radio equipment type RF Module is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
RF Exposure The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna or transmitter Manufacturer name: LG Electronics Inc. The postal address: LG Electronics European Shared Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands The host manufacturer has the responsibility that the host device should be compliance with all essential requirement of RED. Copyright. 2021. All Rights Reserved.