Installation Instructions When installing, please avoid locations exposed to direct sunlight for a long time, locations with high temperatures due to heating apparatuses, etc. Failure to do so may result in fire or explosion. Do not install or store the product in enclosed locations. Doing so may result in fire or explosion. LG Power Supply Instructions Cleaning Instructions Installing the Smart ThinQ hub Donot bend the power cable, Internet cable, or charging cable or place heavy objects e When cleaning the product, do not use chemical substances such as thinner or ben-
on them. zene. Doing so may result in fire or electric shock. Life's Good e Use a dry rag or a soft cloth to wipe the product off. Do not touch the power plug with wet hands. Doing so may result in electric shock or injury. If water has leaked into the product, immediately dry the affected area and contact Firmly plug the adapter into the power outlet after removing any moisture or dust. thie LG lElactronicsiservice center. Moisture or dust may result in fire or electric shock. + Donot spray water or disinfectant on the product. When unplugging the adapter, always pull the body of the adapter, not the power OWN 3 aS) YY UAL cord. The company will not be held liable for product malfunctions or electrical accidents Failure to do so could cause fire or damage to the adapter. caused by customer negligence that results in water, disinfectant, or other foreign 1 Connect the power cable to the Smart Thin hub and adapter. H bi Please use only the voltage or current indicated on the adapter. Smart ThinQ Failure to do so could result in fire. alate mented AVE THESE INSTRUC LIONS. 2 Connect the Internet cable to the Smart ThinQ hub and wireless router (AP). OR INSTALLING 3. Plug the adapter connected to the Smart ThinQ hub into a power outlet. Check whether the Power LED lights up. Operating Instructions Product Contents Only the service engineers of LG Electronics service centers are allowed to disas- Smart ThinQ hub semble, repair, or modify the product. Names and functions of Smart ThinQ sensor Doing so could result in fire, electric shock, explosion, or injury. Keep out of reach of children or pets. Placing the battery in the mouth or applying impact to it causes electrocution or exposure to electromagnetic radiation. Read this owners manual thoroughly before operating the appliance and keep it handy for refere i When the adapter is inserted into the power outlet, do not insert metal objects such as pins or wires into the power connection. Doing so could cause electrocution. ne Smart ThinQ hub Power cable Internet connection cable Adapter Do not use or keep the product near flammable materials (candles, lamps, etc.) or (1x) (1x) (1x) (1x) combustibles (ether, benzene, alcohol, drugs, propane, butane, combustible spray, insecticide, air freshener, cosmetics, etc.). MFL69410401 | Doing so could result in fire or explosion. Smart ThinQ sensor When using the product, if strange smell or smoke is detected, immediately remove the adapter and contact an LG Electronics service center. Failure to do so may result in fire or electric shock. IR communication unit B LED indicator Charging: Red LED is lit. Fully charged: Green LED is lit. 8 thing to strike the product. We have provided many important safety messages in this Smart ThinQ sensor Charging cable Silicone water- Reflector Adhesive tape manual and on your appliance. Always read and follow all safety (3x) (ax) proof ring (3x) (ax) Sensor operational: Blue LED is lt. messages. To reduce injury or damage to the product to persons when (1x)
(B)_ Settings button Data transmission: When the blue LED lights up with a push of the button, this indicates that the sensor is connected.
(A blinking red LED indicates that the sensor is not connected.) using the appliance, follow basic safety precautions, includin:
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or A jure you and others. All safety messages will follow the safety alert symbol and The actual appearance of the components may be different. Smart ThinQ hub components are available only as part of the Smart ThinQ Sensor Kit. Do not charge or use the product for prolonged periods when the product is placed (If you require Smart ThinQ hub components, please contact an LG Electronics service center.) Initialize settings: Press and hold the button for at least 10 seconds. The red and blue LEDs will blink alternately, and the settings registered in the product will be either the word WARNING, or CAUTION. on blankets, electric blankets, or carpets. initialized. Doing so could result in fire. Installing (@) Temperature and humidity sensor unit These words mean : Donot swallow the product or its components. This sensor detects temperature and humidity. This may lead to suffocation. Names and functions of Smart ThinQ hub Installation Instructions
(5) Reset Separate the container (detachable cover), and then press the hole next to the cable connection port with a sharp tool for at least 3 seconds. This will reset the product. (At this time, information registered in the product is not initialized. Please use this feature
(ly Power :
only when the product malfunctions.) The LED is lit when power is connected. A WARNING ~ You may be killed or seriously injured if you do not follow instructions. LED indicator
- You may be slightly injured or cause Ad CAUTION damage to the product if you do not follow instructions. Container (detachable cover) BB, Network The LED is lit when Internet is connected nor-
mally. Please install the product in a location free from electromagnetic interference. Failure to do so may cause the product to malfunction. E Wirel iz . oe Charging the Smart ThinQ sensor The LED blinks when an active wireless connec-
. tion has been established with the Smart Thin Operating Instructions sensor. IMPORTANT SAFETY INSTRUCTIONS A WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following :
Please use only the dedicated adapter provided. (2) Settings Failure to do so may cause the product to fail, voiding your warranty. Initializing settings: Insert a sharp tool into the ENT hole on the side of the product and press a . 5 and hold for at least 10 seconds. The power LED, This could result in product malfunction. network LED, and wireless LED will blink, initial-
izing all information registered in the product. Donot drop or expose the product to impact. 4, Remove the container (detachable cover) from the Smart ThinQ sensor. hen removing the power cable or connection cable from the product, always hold A WARNIN the end of the cable. Reset: Insert a sharp tool into the ENT hole on the
. side of the product and press for around 1-2 sec- Connect the charging cable to the Smart ThinQ sensor and adapter.
| lifornia Safe Drinking Water and Toxic Enforcement Act Failure to do so may cause the product to fall and malfunction. conds to power down and restart the product (at 2 ue California Safe Dri ig . this time, information registered in the product is 3 Plug the adapter connected to the Smart ThinQ sensor into a power outlet. This product contains chemicals known to the state of California to not hitler}
cause cancer ai nd birth defects or other reproductive harm. Wash 160321_Smart ThinQ.itd_ko-KR_en-US.indd 1 2016-05-24 2% 2:06159 TI (a Attaching the Smart ThinQ Sensor and Reflector SING THE PROD PRODUCT SPECIFICATIONS AND CERTIFICATIONS PRODUCT WARRANTY Before Using the Product Attach the Smart ThinQ sensor to an LG home appliance to view various kinds of information on your home appliances conveniently through the "LG Smart ThinQ" app. Washing machine sensor It notifies you to remove laundry when a cycle is complete. Refrigerator sensor The storage periods of foods stored in the refrigerator are indicated. Temperature and humidity sensor It notifies you when the preset temperature or humidity range is exceeded. Door and window sensor It notifies you when door or window movement is detected Automatic air conditioner operation sensor The air conditioner is automatically turned on if the temperature in the space where the air conditioner is installed exceeds the preset value, The air conditioner settings can be changed remotely. Automatic robot vacuum cleaner operation sensor The robot vacuum cleaner begins cleaning at the preset time. The robot vacuum cleaner set-
tings can be changed remotely. Installing the Application Install the "LG Smart ThinQ application on your smart phone to use the product more conve-
niently. The application can be installed from the Google Play Store. Please refer to the Help section of the application for details on how to use "LG Smart ThinQ."
Installing from the Google Play Store On your smart phone, go to Google Play Store, search for "LG Smart ThinQ, and install. Registration Using the "LG Smart ThinQ application, you can experience a wide range of LG Electronics ser-
vices. 4, Onyour smart phone, run the "LG Smart ThinQ application, and then click Create new account. 2 Follow the registration procedure to read the terms of service and enter member infor-
mation, and then press the OK button. Avverification email will be sent to the email address entered. 3 Access your email account, open the email, and press the Authenticate button in order to register your LG account. Information The email address you entered when registering your LG account is your ID. Registering the Product Step 1. Registering the Smart ThinQ hub 4 Run the application and press the Register button on the smart phone screen. 2. Select Smart ThinQ hub (standard) and follow the instructions on your smart phone screen. Step 2. Registering the Smart ThinQ sensor Select the registered Smart ThinQ hub (standard) and press the Register Sensor button. 2 Please follow the instructions on the smart phone screen. Information After resetting the product, the product can be re-registered by following the Registering the Product" procedure above. For instructions on how to reset the product, refer to "Installing."
During firmware updates through the application, please do not turn off Smart ThinQ hub. This may cause Smart ThinQ hub to malfunction. The contents of this manual may vary depending on the version of the "LG Smart Thin ap-
plication, and they may be changed in part without prior notice. 160321_Smart ThinQ.itd_ko-KR_en-US.indd 2 Attach adhesive tape to the bottom of the Smart ThinQ sensor container (detachable cover) and the reflector. Smart ThinQ sensor
(A 2. Attach the Smart ThinQ and reflector as indicated below. Reflector (attach to door and window only) Only LG home appliances may be used. Washing machine Attach the Smart ThinQ sensor near the handle to the washing machine door. Tokeep water from entering the Smart ThinQ sensor, please install the waterproof silicone ring. Front-loading washing machine Top-loading washing machine Refrigerator Attach the Smart ThinQ sensor near the refrigerator door handle, which is most frequently used. Side-by-Side Refrigerators
| Standard L refrigerator Air conditioner With the IR communication unit of the Smart ThinQ sensor facing the remote control signal receiver of the air conditioner, place within 20 cm. The location of the remote control signal receiver may vary depending on the model. wall-mounted air conditioner Floor standing air
conditioner Within 20 cm i Robot vacuum cleaner Temperature and humidity Attach on the upper left or right corner of Attach the Smart ThinQ sensor on a wall the charging station, with the IR commu- surface 1-1.5 m off the floor. nication unit of the Smart ThinQ sensor facing the robot vacuum cleaner. Within 1-1.5 m @) LU @
peas Door and window Attach the reflector on a wall near the door handle or on the doorframe. With the IR communication unit of the Smart ThinQ sensor facing the reflector attached on the wall or doorframe, attach within cm. OS . |
icm 2 Window {|
Door For details on positioning and use, please refer to the "LG Smart ThinQ" application. Trade name of certified party: LG Electronics Co., Ltd. Device name: Specific low power wireless device (wireless data communication system wireless device) Customers have the right to receive free services for one year after the purchase date for any errors that occur while using the product. This product is eligible for free service during the war-
ranty period within South Korea only. As wireless equipment may cause radio interference, it must not be used to provide life saving Model Name Warranty Period:
services. Date of purchase lyear akin The warranty period is calculated from the purchase date. Please record your purchase date Model Name AIHC61 ISC61G-2B here.(If the purchase date cannot be verified, the warranty period is calculated from three months after the manufacturing date or import clearance date.) Frequency used 2405-2480 MHz 2405-2480 MHz Requested output. 10 mW/MH: 10 mW/MH: . _ .. 7 a e we ee Consumer Dispute Resolution Criteria Modulation method O-QPSK O-QPSK
+ Only products found to have manufacturing defects or which have experienced natural failure signal type /channels | 20/16 20/16 within the warranty period are eligible for free repairs. inp gonr/enment | SV/0SSA aaah Please present your receipt for refund. Power consumption max. 400 mA max, 210 mA Compensation Type of consumer damage - fare Operating temperature | - 20C to 40C - 20C to 60C Within the warranty period | aranty period Manufacturer / Coun- : ; - if major repairs are required within 10 days | Product exchange or refund yates / UG Electronics Co, Ltd./China | LG Electronics Co.,Ltd. / Korea cf purchase efthe purchate pee if major repairs are required within 1 Certification number MSIP-CRM-LGE-AIHC61 MSIP-CRM-LGE-ISC61G-ZB month of purchase Product exchange Open Source Software License Notice The following applies only to the Smart ThinQ hub:
Please visit http://opensource.lge.com to obtain open source codes developed under GPL, LGPL, MPL or other open source licenses that are included in this product. In addition to source codes, you can also download the contents of all licenses, copy-
right indications and indication of no warranty. If you request open source codes for any software included in this product by send-
ing an email to opensource @lge.com within three years of purchasing the product, we will send the codes on a CD-ROM with minimal charges for the CD and shipping. CHECKLIST BEFORE REQUESTING SERVICE If any of the following symptoms occurs while using the product, please double-check. It may not be a malfunction. Smart ThinQ hub Is the power cable properly | Firmly connect the power cable to the The power does | onnected to the Smart Smart ThinQ hub. OL tum ont ThinQ hub?
Check whether the network LED of the Smart ThinQ hub is lit. Please connect the network cable and
, power cable between the Smart ThinQ ees wireless router (AP) | jiu) and wireless router (AP) properly. Power down and restart the wireless the SmanThind router (AP), confirm that it operates rae terete propery, and then power dv nd registered/found restart the Smart ThinQ hub. inthe "LG Smart [isthe network LED off? |e checkwhether the IP address has Thin" applica- been set successfully from the wireless tion. router (AP). Check whether the DHCP (dynamic IP) function of the wireless router (AP) is enabled. Isthe Smart ThinQhub | For better performance, please sepa-
installed near the wireless rate by at least 10 cm from the wireless router (AP)? router (AP). Smart ThinQ sensor When the Smart ThinQ |e The battery has been discharged. The power does sensor button is pressed, Please charge the battery,
: does the LED blink?
Ifthe red LED blinks, connection with the Smart ThinQ hub has been cut. he productis _ | When the Smart Thing Please re-register the Smart ThinQ'sen-
sensor button is pressed sor. notworking. | briefly, does the LED blink? | ifthe blue LED blinks, the Smart Thin hub is connected normally. Power down and restart the Smart ThinQ sensor. Ifadefect occurs. _| Product exchange Product exchange or refund of the purchase price Any performance | If repair is not pos-
or functional de- | sible. fect that occurred [7 exchange is not pos-
during normal use | sisle, within the war-
ranty period Exchange (paid) Refund of the purchase price The exchanged product requires a major repair | Refund of the purchase price within one month. Product exchange
(In case of entrustment toa Damages during transportation after pur- _| transportation company, how-
chasing the product ever, the seller will exercise his/ NA. her right to indemnity against the transporting company). Damages that occurred while the selleris [pact exchange ia installing the product The above compensation criteria are based on the consumer dispute resolution standards reported by the Fair Trade Commission.
* Follow the "Consumer Dispute Resolution Criteria for matters not covered above. Cleaning, adjustment, and manual are not covered by the service. Liability for paid-for services (expenses paid for by the customer) If service is requested in any of the following cases, any service provided will be subject to a fee even during the warranty period:
You will be charged if you request service for non-failure. Therefore, please read the Owner's Manual carefully.
* You will be charged for equipment failure due to dropping, flooding, impact, damage, forced operation, or other improper handling by the user.
* If failure occurs due to repairs or modifications made by a person other than a qualified tech-
nician from an LG Electronics service center If product failure or damage occurs due to use of parts other than genuine LG parts Lost or damaged parts due to arbitrary disassembly of the product by the customer Malfunctions caused by natural disasters such as lightning, fire, storm and flood, seawater, gas, and earthquakes
* If consumable parts are replaced under normal wear and tear conditions LG Electronics Service Center For inquiries or inconveniences experienced while using the product, please inquire by telephone before visiting an LG Electronics service center. Pitot heck ues Internet service request 1544-7777, 1588-7777 (paid) 080-023-7777 (toll-free) www.lgservice.co.kr What is the Korea Service Quality Certification?
This certification is given by the Korea Association for Service to compa-
nies with excellent service quality and customer satisfaction. Consumer Centered Management This certification mark is attached to products and services of consumer-
oriented companies that make consumers their top priority. This mark is assessed by the Korea Consumer Agency and certified by the AUMeAaS Zueinenii zene Fair Trade Commission.(www.kca.go.kr) 2016-05-24 2 2:0707 Open Source Software Notice Information 2 USS Smart Thing eH AASiLch To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://
opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product. Wireless LAN Module Specifications Model Frequency Range AIHC61 2405-2480 MHz ISC61G-ZB 2405-2480 MHz Output Power
(max.) 10 mW/MHz 10 mW/MHz FCC Notice (For transmitter module contained in this product) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver.
~ Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.
ae