FCC ID: BEJNTLU20 Tablet/Notebook PC with WLAN and Bluetooth

Using the AC adapter An AC adapter or battery pack is needed to supply power to your computer. The AC adapter can be used with a 100~240V AC power source. Use only the AC adapter that comes with your computer. Using any other adapter may cause damage to your computer. Connecting the AC adapter to an AC outlet (100~240V) Connect the power cord to the adapter, and then plug the other end into an AC outlet. Connecting AC adapter to the power device Connect AC adapter to the power device at the left side of the computer.

- 33 -

Opening and positioning the LCD panel Push the latch button, and open the display panel. Adjust the slope of the display panel for comfortable viewing. (Refer to page 24) Power On Press the power switch to turn on the computer. Turning the power on and off Before turning on the computer, make sure the AC adapter is connected or the battery is charged. Turning on the computer 1. Push the latch button to the right1 and open the display panel2. 1 2 2

- 34 -

2. Press the power switch. Note:

The power switch has an option to protect for pressing as users disposal. 3. Pressing the power switch starts the self-diagnostic procedures; then Windows(R) XP startup screen is displayed. 4. If you turn the power on the computer for the first time, you have to register your copy of Windows XP. The registration process may differ depending on the model, but the difference does not affect the use of your computer. 5. In a moment, Welcome to Microsoft Windows appears on the screen. Click 6.

[Next]. The End User License Agreement appears on the screen. Be sure to read the agreement, select Yes, I accept, and click [Next].

- 35 -

7. Whats your computers name? appears on the screen. Type the name and description of your computer, and click [Next]. 8. 9. Ready to register with Microsoft? appears on the screen. Select No, not at this time and click [Next]. Who will use this computer? appears on the screen. Type the names of the users and click [Next].

- 36 -

10. Thank you! appears on the screen. Click [Finish] to complete the regist-ration process. Turning off the computer Quit all running applications; click [Start] and choose [Turn Off Computer]

from the start up menu. LG In the Turn off computer window, choose Shut down.

- 37 -

The computer is turned off automatically. Caution If the Drive in use indicator is on, do not turn off the computer, as doing so may damage the data being read from or written to the drive. Warning If Windows does not shut down correctly, press and hold the power switch for more than 5 seconds; the system will shut down. Turning off the computer this way may damage the system. It is recommended that you always turn off the computer by choosing Shut down in the Start menu. If the computer does not shut down correctly while running applications, the data in the hard disk drive may be damaged. If a program does not respond, press the Ctrl+Alt+Delete combination to start the Task manager; then quit the program or restart the system. If Windows or program file is damaged by shutting down the system incorrectly, reinstall the program. The user is responsible for the loss of data caused by incorrect use of the computer.

- 38 -

Using Windows XP Windows XP is new, brilliant and easy-to-use. Background and title bar have been rearranged concisely, and it became easier to access the application programs from the start menu. Also, it allows the users with more diverse options to choose from when decorating their desktop. Overview Windows XP is an operating system that runs a computer. Learning the basics features in Windows is recommended to utilize a computer effectively. Click

[Start]->[Tour Windows XP] to explore the features and tools available in Windows XP. Window Buttons 1. Minimize 2. Maximize 3. Close 3 1 2 3

- 39 -

Help and Support Click [Help and Support] to learn how to troubleshoot problems you may encounter while using the computer. Click [Start]->[Help and Support]. LG LG The following window appears. You can search for useful Help and Support information. You can connect to the Internet and ask for assistance online. You can setup and configure your computer to personalize your computing environment Click to learn the features and troubleshooting information

- 40 -

Windows XP desktop 5 1. [Start] button 1 2 3 4 Click [Start] button to open the [Start] menu. Click [All Programs] to open the list of programs installed in the computer. 2. [Start] menu

[Start menu] shows everything you need to start working in the Windows XP environment. 3. Taskbar Taskbar shows programs that are currently open and running. 4. Taskbar icons and clock Taskbar icons show and let you configure ongoing activities such as battery power status, display properties, LAN settings, etc. 5. Recycle Bin Put your unused items and files in the Recycle Bin. Right-click the Recycle Bin

- 41 -

LG and select [Empty Recycle Bin] to permanently delete the items inside the Recycle Bin. Pinned items Control Panel lets you change the settings in your computer My computer shows the drive and network information for your computer Start menu Changing the look of the Start menu Right click [Start] button and select [Properties]. In the Start menu tab, choose from either Start menu or Classic Start menu. Click [OK] to apply the new setting. Changing the pinned items in the Start menu Right-click the item you want to pin it to the Start menu. Select [Pin To Start Menu]. The item is pinned at the top of the Start menu. Showing the recently used items on the Start menu Right-click on [Start] button and click [Properties]. In [Start Menu] tab, select [Start menu] and click [Customize]. In [Advanced] tab, check [List my most recently opened documents] and click [OK].In Taskbar and Start Menu Properties window, click [Apply]->[OK]. If you click [Start] button the next time, recently used items appear on the Start Menu. Recently used items

- 42 -

Control Panel The Windows XP Control Panel can display items in either Category View or Classic View. Category View Classic View

- 43 -

Setting up Local Area Network (LAN) connections Local Area Network (LAN) connection provides high-speed network connection for your home or company. Attach a LAN cable to the Ethernet (LAN) port. Click [Start]->[Control Panel]->[Network Connections]. Right-click a Local Area Connection and select [Properties].

- 44 -

If the following window appears, click [General] tab and 1. check if 3COM 3C920 Integrated Fast Ethernet Controller is installed in the computer 2. Then, check Internet Protocol, and 3. click on [Properties]

1 2 3 Click on [General] tab, and Select [Obtain an IP address automatically]

Click [Ok] when Internet protocol (TCP/IP) setting is completed. Note:

Ask your network administrator for the appropriate IP settings.

- 45 -

Using Wireless LAN You can use Wireless LAN to connect to the network and use the Internet in your home and office. You can share files and folders over the network without the attaching network cables to the computer. For saving power, Wireless LAN is set up as power off when shipping. If you use Wireless network devices such as LAN

/Bluetooth, use Wireless On/Off button after turning on wireless devices. Connecting and using the wireless network Right-click the Wireless network icon on the Taskbar and select [View available wireless network]. Select AP(Access Point) you want to connect to and type necessary information. Click [Connect]. If you place the mouse pointer on the Wireless network icon on the Taskbar, you can see the status of the wireless network.

- 46 -

Using IP Operator IP Operator is useful to access to network everywhere by notebook. User access to network at the several places (Home, Office, and Vendor etc.) can save and modify the network environment (IP address, Domain, Workgroup). For more detailed information, refer to [IP Operator]. Double click [IP Operator] icon on Desktop System tray. If the following window appears, select LAN or High-Speed Internet at the drop down menu and type the computer name you use.

- 47 -

Type the name is appropriate at [Profile List] after making a decision whether a user belonging to [Domain], or a member of [Work Group]. Choose one of setting options as below. If setting [Obtain an IP address automatically],

- IP address, Subnet mask, Default Gateway windows are changed the color as grey automatically. If setting [Use the following IP address]

- Insert IP address, Subnet mask, Default Gateway window. Then, insert DNS Server. Click the [Profile Save] button when finishing inserting items in [Profile List]

Note:

When setting [Obtaining an IP address automatically], it is unavailable to insert IP address, Subnet mask, and Default gateway. If pressing [Profile Apply], no items appear at [Profile List]. If a user needs to apply the specific item, select one of items at [Profile List], and click [Profile Apply]. Changing the Themes and Desktop background Using the Windows Classic Theme Click [Start]->[Control Panel]->[Display]. Click [Themes] tab Select [Windows Classic] from the [Theme] drop down menu.

- 48 -

Using a different theme 1. Click [Start]->[Control Panel]->[Display]. 2. Click [Themes] tab 3. Select another theme from the [Theme] drop down menu. Note:

In Appearance tab, you can click [Advanced] button and change the color scheme, font size, and windows and button styles. In Themes tab, you can change the overall appearance of the desktop. If there is more than one user using the computer, each user can apply different theme and desktop appearances. Changing the desktop background Click [Start]->[Control Panel]->[Display]. Click [Desktop] tab. (OR you can right click on the mouse while in desktop background. When a short cut menu pops up, choose [Properties]

Scroll down the [Background] drop down menu and select an image for the background. You can also click [Browse] button and select an image you have saved. Setting the Screen Saver Click [Start]->[Control Panel]->[Display]. Click [Screen Saver] tab.

- 49 -

Select the idle time before activating the Screen Saver from [Wait] drop down menu. Check [On resume, password protect] to protect the computer from unauthorized users. Taskbar Taskbar displays programs and files that are currently open. If there are many programs running on the computer, the Taskbar group together files from the same program to prevent taskbar icons from cluttering up the Taskbar. Desktop cleanup Desktop Cleanup Wizard removes unused desktop items to a folder. The Desktop Cleanup Wizard runs every 60 days but you can also run it manually. 1. Click [Start]->[Control Panel]->[Display]. 2. Click [Desktop] tab. 3. Click [Customize Desktop] -> [Clean Desktop Now] button.

- 50 -

Using the Power Options Windows XP uses its own power-saving program to manage the battery power. Click [Start]->[Control Panel]. Double-click [Power Options]. In Power Options Properties window, change the settings best suited for your computing environment. Power Options Properties Click [Power Schemes] tab. Drop down the menu and select [Portable/Laptop] to set notebook PC with the appropriate power schemes. This includes detailed timeline for [Turn off monitor], [Turn off hard disks], [System standby], and [System hibernates].

- 51 -

Note:

If the computer enters System standby mode, the hard disk is turned off to conserve the battery power. In System standby mode, you cannot save your work. Be sure to save your work before entering System standby mode. When the computer enters System hibernation, the computer saves all your work in the hard disk and turns off the computer. Caution If the computer enters System standby or hibernation mode while playing a computer game, a serious error may occur. Be sure to quit the computer game before entering a power-saving mode. Power Options Properties Click [Alarms] tab. Check [Low battery alarm] and [Critical battery alarm], and move the sliders to set the power level to activate low battery alarm and critical battery alarm.

- 52 -

You can be notified with Sound alarm or Display message. You can also set the alarm action such as putting the computer into System standby mode or System hibernation mode. You can also run a specific program when the alarm goes off. Advanced tab In Options, you can set the computer to prompt for password when computer resumes from standby. You can also set the computer to enter a power-saving mode when closing the display panel, pressing the power switch or the combination of Fn+F4.

- 53 -

Power Meter You can click the Power Meter icon on the Taskbar to check the power level of your computer. System Hibernation In Hibernate tab, you can enable or disable System hibernation mode and check the disk space needed for hibernation.

- 54 -

Caution Do not remove the battery pack when the AC adapter is not connected to the computer. If you keep using the computer while low on the battery power, you may lose the data when the battery power goes out. If you are notified of low battery power, save your data and connect the AC adapter, or turn off the computer and change the battery pack. Attaching external devices Attaching a USB device USB mouse (not included) You can connect to keyboard, hub, digital camera and other devices that support USB. Attaching an external monitor Note: Turn off the computer before attaching an external monitor. Use a standard VGA connector that should be 16mm wide. Connectors wider than 17mm will not fit in.

- 55 -

External monitor

(not included) Monitor toggle function (switch the monitor by short-cut keys) After install the external monitor to the notebook PC, use Fn + F7 to switch the main monitor to LCD only, monitor only, and LCD + monitor both, in sequence. Attaching an IEEE 1394 device (Option) Digital Camera

(Purchased separately) You can attach IEEE 1394 devices such as external hard disk drive or CD-RW drive, MP3 player, digital camera, and video camcorder.

- 56 -

Users guide Thank you for using the LG product. LG has manufactured and tested this product to provide you with a reliable computing environment. Please read this manual carefully before using the computer. The following signs call attention to features and operations that may be dangerous to the user. Follow the instruction closely to reduce the risk of physical harm or damage to the equipment. Danger: Not following the instruction will result in immediate death or serious injury. Warning: Not following the instruction could result in death or serious injury. Caution: Not following the instruction could result in minor or moderate injury and/or damage to the product. Microsoft, MS, MS-DOS, and Windows are trademarks of Microsoft Corporation in the United States and/or other countries. is a trademark of LG. Copyright 2003 LG Electronics, Inc., DigitalMate Co., Ltd. Information in this manual may include technical inaccuracies or typographical errors. Images in this manual are for illustrative purposes only and may be different from the actual product. LG reserves the rights to make improvements and/or changes to the product without notice. Reproducing any or all of the information contained in this publication without written permission is prohibited. Your computer complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use.

- 6 -

Important Safety Instructions These safety instructions will ensure many years of safe enjoyment from the product. Set up your computer on a flat, stable surface. (LG is not responsible for the problems and damages caused by incorrect use of the computer in an unsafe environment.) Selecting a place to work Warning Do not operate your computer near water; for example, in a bathroom or near a swimming pool. The computer may not function correctly, and there is the risk of electric shock. Operate the computer within a temperature range of 50 to 95 degrees F (10 to 35 degrees C) and 20 to 80% of relative humidity. Safely dispose of the packing materials, such as desiccant and plastic bags. Children may swallow desiccant or suffocate from plastic bags. Caution Keep your computing environment clean and free of dust. There is a risk of dysfunction to the computer. Keep your computer away from electromagnetic fields. Exposure to the electromagnetic field may result in loss of data in the hard disk drive and/or damage to the LCD. Do not block the fan louvers and leave enough space around the computer for ventilation. The computer may overheat and result in fire or injuries.

- 7 -

Using the battery pack Warning Use only a battery pack recommended by LG. Using a battery pack of a different type may result in explosion. Keep metallic objects, such as keys and clips, away from the battery pack. Objects that conduct electricity can short-circuit the battery pack and result in fire and/or injuries. Keep the battery pack away from heat. There is a risk of explosion or fire. Do not short-circuit battery terminals. There is a risk of explosion. Do not subject the battery pack to temperatures above 140 degrees F (60 degrees C). There is a risk of explosion or fire. Keep the battery pack away from children and/or pet. There is a risk of injury and damage to the battery pack. Do not put the battery pack in the water. There is a risk of fire or damage to the batter pack. Be cautious when handling the keen part of the battery pack hook. It may hurt you. Lock the Notebook locker at the bottom surface. There is a risk of battery damage.

- 8 -

Replacing and disposing of the backup (standby) battery Warning If the backup battery is incorrectly replace, there is danger of explosion. The lithium batterry contains lithium and can explode if it is not properly handled or disposed of. Replace only with a battery of the same type.

- 9 -

Connecting to an AC power source Warning Do not use loose or damaged power plugs. There is a risk of electric shock or fire. Use properly grounded outlet. Connecting the computer to an outlet without proper grounding may result in electric shock and damages to your computer. Do not touch or grab the power plug with wet hands. There is a risk of electric shock. Hold the plug body when removing the power cord from an outlet. There is a risk of fire and damages to the computer. Use your computer at the proper voltage/current level indicated. Supplying improper levels of voltage/current may result in electric shock, fire, and/or damage to the computer. If you hear a noise from the power cord or outlet, unplug the power cord immediately, and contact the customer service for help. There is a risk of fire or electric shock. Make sure the power plug fits snugly into the electrical outlet. Loose fit may result in fire. Do not bend or place a heavy object on top of the power cord. Keep the children and pets from damaging the power cord. Damaged power cord may result in electric shock or fire. Keep the power cord and plug clean and free of dust. There is a risk of fire.

- 10 -

If an object or liquid enters the computer or an adapter, remove power cord, battery, and any other cables from the computer, and contact the customer service for help. There is a risk of an electric shock, fire, or damage to the computer. Before cleaning the computer, disconnect the power cord, battery, and any other cables from the computer. There is a risk of electric shock or damage to the computer. Using the computer Warning For cleaning your computer, use mild detergent or computer cleaning products. Be sure to dry completely before using the computer. Using the computer without completely drying it may result in electric shock or fire. During a lightning storm, disconnect the power cord, telephone line, and LAN cable from the computer. There is a risk of electric shock or fire. Do not place water, chemicals, or liquid of any kind on the computer. Liquid of any kind entering inside the computer may result in an electric shock, fire, or damage to the computer. Do not connect the modem directly to a multi-line telephone. There is a risk of fire or damage to the computer. If you drop your computer, remove the power cord and battery pack, and then contact the customer service for check up. There is a risk of electric shock or fire.

- 11 -

Do not place a burning candle or cigarette on the computer. There is a risk of fire. If you see or smell smoke from the computer or adapter, turn off the computer, remove the power cord, and then contact the customer service for help. There is a risk of fire. The LCD monitors fluorescent lamp include hydrargyrum. Avoid direct contact with liquid from the broken LCD. If it spills into eyes or the other parts of your body, wash it out several times with clean water. If you feel something different, contact a doctor or a health administrator immediately. Using the computer Caution Do not place an object, such as a pen or clip, on the keyboard. If you close the LCD cover with an object on the keyboard, you may damage or break the LCD. Do not touch or scratch the LCD with sharp objects. The LCD may be damaged. Be sure to turn off the computer before closing the LCD cover. The computer may overheat, and be damaged or deformed. Do not exert excessive pressure on the LCD. LCD is made of glass, and an excessive force can break the LCD. Follow the instructions in the user's guide. There is a risk of damage to the computer. Do not place objects into the PC Card slot. There is the risk of electric shock or injury.

- 12 -

Upon completion of any service or repairs, ask service technician to perform safety checks. Ignoring safety checks may result in electric shock or fire. Use the Wireless LAN at least 5m away from a microwave oven or plasma lamp. When using the Wireless LAN near a plasma lamp, use the channel 11, 12, or 13. the connection may be unavailable or slow. Keep the computer away from heat. The computer may deform and there is the risk of fire. When attaching an external device, make sure the connector from the device and the port on the computer are of the same type. There is a risk of damage to the computer. Do not insert a damaged CD-ROM or floppy disk. There is a risk of damage to the computer.

- 13 -

Upgrading the computer Warning Before disassembling the computer for upgraing purposes, turn off the power and remove the power cord, phone line, and battery pack. There is the risk of electric shock or fire. If you need to open the computer cover, contact the customer service for help. Keep screws and other small parts away from children. Children may choke on a screw or other small part. If a child swallows a small part, receive a medical care. Upgrading the computer Caution Do not attempt to disassemble or modify the computer without consulting customer service. There is a risk of electric shock. Replace only with the parts approved by LG. There is a risk of fire and damage to the computer. Consult with the customer service before connecting and using the computer with any non-LG product. There is a risk of damage to the computer.

- 14 -

Carrying and storing the computer Caution Before moving the computer, turn the power off and remove all the cables. You may trip over the loose cables and fall. When traveling on an airplane, follow the instruction by flight attendant. Using the computer on an airplane may result in an airline accident. Do not travel with LCD monitor open. Do not expose your computer to the direct sunlight in a closed area such as inside a car. Prolonged exposure to high temperatures may deform the computer and also result in fire.

- 15 -

Preventing data lose (handling hard disk drives) Caution Be cautious when handling the hard disk drive. The hard disk drive is very delicate to any physical impact. Always make backups for your data.LG is not responsible for the data lose caused by users. The data on the hard disk or the drive itself may be damaged in the following situations:

1. Exposure to a physical shock during the disassembling or installing process. 2. The computer is reset (rebooted), for example by power outage, while the hard disk drive is operating. 3. Exposure to virus. 4. The computer is turned off during operation. 5. Exposure to a physical shock while the hard disk drive is operating. To prevent data lose due to hard disk drive damages, always backup your data. LG is not responsible for the lose of data.

- 16 -

Ergonomic information Warning Adjust the display position to avoid glare or reflections from overhead lighting. The top of the display should be on or below the level of your eyes. Keep your head and neck in an upright position. Keep your forearms, wrists, and hands in a horizontal position. Adjust your chair to keep your arms and hands in a comfortable position. Using the computer in the same position for a prolonged period of time may cause discomfort to your body. Take short frequent breaks from working with your computer. No more than 2 hours of computing per day is recommended. Stretch periodically to reduce muscular discomfort. Check the volume level Check if the volume level is too high before using headphones. Do not use the headphones for a prolonged period of time.

- 17 -

For Australian Users Warning For safety reasons, only connect equipment with a telecommunications compliance label. This includes customer equipment previously labelled or certified.

- 18 -

Laser compliance statement An optical storage drive (device), such as a CD-ROM, CD-RW, DVD-ROM drive, which can be installed in this unit is a laser product. The drivers classification label is on the surface of the drive as shown below. CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APPAREIL A LASER DE CLASSE 1 KLASS 1 LASER APPARAT The drive is certified by the manufacturer to comply with the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class I laser products at the date of manufacture. In other countries, the drive is certified to conform to the requirements of IEC825 and EN60825 for Class 1 laser products. DANGER Do not open the optical drive unit: no user adjustments or serviceable parts are inside. Use of controls, adjustments, or the performance of procedures other than those specified might result in hazardous radiation exposure.

- 19 -

Overview Package contents The following items are included in the package. Match the items on this list with the items in the box. Some items may look different from the pictures. LU20 Note: Make sure you have the correct AC adapter before connecting it to the computer. Installation guide power cord/AC adapter (65W) (Using offered cable) Modem cable Battery

- 20 -

Caution When cleaning your computer, use cleaning products manufactured specifically for computing equipment. Using abrasive chemicals, such as paint thinner, benzene, or alcohol, may damage your computer. Components Learning the components and their functions helps you to use the computer more easily and thoroughly. Front view LU20 Wireless Device On/Off button Volume Up button Volume Down button Power button Keyboard TouchPad Latch switch LCD LCD display panel rotation axis TouchPad button Latch button

- 21 -

Note: Power switch, Up/Down button, and Wireless Device On/Off button are coated for preventing static electricity purposes. Rear view USB(Universal Serial Bus) port Modem Port Fan louvers VGA port LAN Port Left view USB port PC Card eject button Microphone jack SD memory Card slot IEEE 1394 Port PC Card slot Headphone jack Built-in speaker

- 22 -

Right view Built-in speaker Key hole (Kensington Lock) Fan louvers Security key hole (Kensington Lock): User can attach a separately purchased chain lock into the security keyhole and connect it to a fixed object to prevent a notebook theft. Status indicators Note: Some models may look different from the picture below. 1 5 6 2 4 3

- 23 -

1. Power: Power status indicator indicates the following status of the computer. Green: The computer is turned on. Off: The computer is turned off or is in hibernation mode. Blinking: The computer is in standby mode. 2. Drive in use: Drive in use indicator lights up when data is being written to or read from the hard disk. 3. Wireless activity indicator: Wireless activity indicator indicates the following. Off: The wireless card does not have the power or RF is off. Blinking: The wireless client is not associated with the network. Slow blinking (3-4 seconds interval): the wireless card powered on and attempting to connect. Fast blinking: The wireless card transmitting and/or receiving data by the rate depending on blinking speed. 4. Num lock: Num lock indicator lights up when the combination of the Fn and Num lock key is pressed. When this indicator lights up, you can use the embedded numeric keys. (To use the numeric keys, you must enable the Internal Keypad setting under the Advanced menu in the BIOS Setup Utility) 5. Caps lock: Caps lock indicator lights up when the Caps lock key is pressed. When this indicator lights up, you can type capital letters without pressing the Shift key. 6. Battery: Battery status indicator indicates the following status of the battery. Off: The computer is not connected to an AC adapter and the battery is discharged. Amber (orange color): The computer is connected to an AC adapter and the battery is charged. (0% ~90%) Amber and Green (blinking) : The battery is nearly full charged (90~100%) Green: The computer is connected to an AC adapter and the battery is fully charged Red: There is some problem in the battery. Green blinking: The battery is fully discharged. Green blinking for three times: The battery is fully discharged / Pressing the power button when system is off

- 24 -

Using LCD panel LCD panel has the function of 180 rotation switching as tablet PC, and can be laid upward on the keyboard. Opening LCD Panel Push the latch button in the direction of the arrow1, and open the display panel 2. Adjust the slope of the display panel for comfortable viewing. 1 2 2 Using Tablet mode When using tablet mode, follow orders as below. 1. Open up LCD panel till the keyboard is 90.

- 25 -

Warning Do not prevent fan louvers when using tablet mode. Internal temperature rise can be a risk of damage to the computer. 2. Push down the tilt at the back of computer as direction (white arrow). Warning Do not make LCD rotate without pushing down the tilt. There is a risk of damage to the computer. 3. If LCD panel has 90 on the keyboard, rotate LCD as clock-wise to make an opposite side.

- 26 -

Warning Follow up defined orders. There is a risk of LCD Panel rotation axis crash when direction is different. 4. Pull down LCD panel to table PC body as direction (white arrow) with holding at the upper edge of LCD. 5. Fix the latch switch on LCD panel after folding as close to the keyboard completely.

- 27 -

Warning When using LCD as tablet mode, it can cause the button error. When using tablet mode, do the lock device before using the computer. Using notebook mode 1. If using notebook mode, lift up till LCD panel has 90 on the keyboard after pushing down the latch button. 2. If LCD has 90 on the keyboard, make it rotate as counter clock-wise. 3. Adjust the slope of the display panel for comfortable viewing after making a rotation completely.

- 28 -

Basics This section describes how to use the basic features of your computer. Read this section before using the computer. Using the battery pack The battery pack recommended fully charged before first use. 1. Turn the computer over so that the battery slot faces up.

- 29 -

2. Place the battery pack in the battery slot, and align the two protrusions on the battery pack with the two slits on the side of the battery slot. 3. Gently push the battery pack into the slot until it clicks. The battery pack is inserted. You can lock the battery pack in place by pushing the left battery latch in the direction shown above. If you hear a click, the battery pack is locked in. 4. Connect the AC adaptor and open the LCD panel. The battery is charged automatically right after connecting. (Refer to Page 38 Using the AC adapter) 5. Check the battery status indicator.

- 30 -

If the battery is fully charged, the indicator is green light. 6. To remove the battery pack, unlock the left battery latch to the right until it clicks, and push the right battery latch to the left and hold; then slide the battery pack out of the slot. Caution When you are not using the computer, remove the battery pack. Note:

Battery LED If pressing [PUSH) button, 3 LEDs are turned on and brightened by charging the battery. In the case of exchange the battery on standby mode.

- Anytime is available to exchange the battery when using AC adapter.

- Available to exchange the battery depends on the system activation when using the battery only without AC adapter.

* System is running (Power indicator LED: Green ):

Unavailable to exchange the battery. There is the risk of losing data.

- 31 -

* Standby mode (Power indicator LED :Green blinking): Available to exchange the battery.

* But in standby mode, if the battery is removed for a long time, the system is off and the data is blow up. So, there is the available time to exchange is limited to I minute.

* If the battery is left for a long time without charging, then after charging the battery for more than 12 hours, the battery exchange is possible.

* Hibernation mode / Windows off mode: (Power indicator LED off) : Anytime is available to exchange and there is no limit in time. Maximum power-saving mode / Turn off computer No time limit to exchange the battery. Note:

The battery pack has the following characteristics. Self-discharge: The battery gradually loses its power over time without ever being used. Periodic full discharge/charge: Frequent recharging of the battery pack can reduce the duration of the battery pack. Periodic performance of full discharge/charge will restore the capacity of the battery pack, in every 30 ~ 60 days. You should use the battery until its power is low; then fully charge the battery. To use the battery pack safely and effectively,

- Do not short-circuit the battery pack.

- Keep the battery pack away from heat or fire.

- Do not disassemble the battery pack.

- Do not expose the battery pack to water.

- Keep the battery pack away from children.

- If the temperature of the battery pack drops below 50 F (10 C), the trickle charging begins. The trickle charging may take up to 16 hours for the battery pack to be fully charged.

- 32 -

Using Battery Miser Battery Miser is the program to manage energy saving function makes the battery of notebook computer maximum. When using Battery Miser, it is available to use both original power management functions of Windows and the advanced power management functions of battery miser. For more detailed information, refer to [About Battery Miser]

Double click [Battery Miser] icon on Desktop System tray. Battery Miser main screen appears as below. Power scheme: The group that manages the power to reduce power consumption of computer peripheral units. Battery alarm: If the battery power gets down to low alarm, critical alarm, user can define the option for alarm is working.

- 57 -

Note:

When pressing the keys Fn + F8, it keeps unused sound device power management(Sound device is always ON). If pressing one more, it return to the original set point. When pressing the keys Fn + F9, it keeps unused Monitor power management(Monitor is always ON). If pressing one more, it return to the original set point.

- 58 -

Input/Output Using the keyboard The keyboard is used for entering text and commands in the computer. Component The keyboard is composed of character, number, and other special function keys. Function keys: Function keys enable you to perform different operations depending on the operating system and application program you use. Hot keys: Hot keys (shortcuts) are used in conjunction with Fn key to provide shortcuts for some of the predefined operations, such as entering power-saving mode.

- 59 -

Cursor control keys: You can move the cursor in the direction of the arrows. Editing keys: You can move the cursor to the beginning or end of the current line, or up and down the screen. Character and number keys: consist of character keys, number keys, special character keys, and spacebar. Spacebar is used for creating a space between characters. Embedded numeric keys: You can press the combination of Fn and ScrLk keys to enable the embedded numeric keypad. Num Lock indicator lights up and enables you to use the embedded numeric keypad shown below. You can press the combination of Fn and ScrLk keys again to disable the embedded numeric keys.

- 60 -

Caution Do not spill water, juice, coffee, etc on the keyboard as it may damage the computer and cause an electric shock. Note:

In the middle of entering characters, if numbers are entered instead of characters, press the combination of Shift and ScrLk to disable the embedded numeric keys. Modifier and special function keys 3 2 1 7 1 4 6 5 1. Shift key: Hold Shift key down and press another key to enter the upper case letter for the key. 2. Caps Lock key: Press Caps Lock key to lock the keyboard in the upper case position. When the Caps Lock indicator lights up, you can press another key in combination with Shift to enter the lower case letter for the key. 3. Esc key: Use Esc key to quit programs or cancel a operation in a program. 4. PrtSc (Print Screen) key: Press PrtSc key to take the snapshot of the entire area visible on your screen and store it in the clipboard. 5. Enter key: Press Enter key to enter a command or to end a line.

- 61 -

6.Shortcut menu key: Press Shortcut menu key to view shortcuts for the current program. (Shortcut menu key works the same as the right-clicking the mouse button) 7. Windows(R) key: Press Windows key to view the Start menu. LG LG Note:

You can lock the keyboard in the upper/lower case position by pressing Caps Lock key. Caps Lock indicator lights up in upper case position. You can use the combination of Shift and a character key to enter its upper/lower case letter. Hot keys The following Hot keys provide you with shortcuts to operations, such as adjusting the brightness of the computer display. Fn+F1 : User-defined Hot key. (Setting is available at OSD) Fn+F2 : User-defined Hot key. (Setting is available at OSD) Fn+F3 : User-defined Hot key. (Setting is available at OSD) Fn+F4: Force the computer to enter power-saving mode. (ex: system standby and hibernation)

- 62 -

Fn+F5:

Press the combination once to disable the touch pad, and press again to enable the touch pad. (The touch pad initialization takes 1~2 seconds, so wait for the Initialization to end before using the touch pad) Fn+F7:

When the computer is attached to an external monitor, you can change the display output location with Fn+F7 combination. You can switch to and from the three types of display modes, LCD display only, the external monitor only, or both at the same time. Fn+Home:

The computer display becomes darker. Fn+End:

The computer display becomes brighter. Fn+F8:

Enbale/disable Auto Sound power management (battery mode only). Refer to Battery Miser Help. Fn+F9:

Enable/disable Auto Brightness control. Refer to Battery Miser Help. Fn+Esc:

Maximum power-saving mode. (when OSD is installed) Fn+F10 : System information Fn + ScrLk/Num Lk: Number lock Fn+Delete : Insert Fn+: Scroll Up Fn+: Scroll Down Fn+ : Volume Up Fn+ : Volume Down Fn+F11: F12 Fn+PgUp : Prt SC Fn+PgDown : Pause

- 63 -

Using the touch pad (Mouse) The touch pad can be used with a mouse at the same time. It has a scroll button, which functions similar to a scroll wheel on a mouse. 1 2 3 1. Touch pad: used to move the pointer. 2. Left button: used to select or click items. 3. Right button: functions similar to the right button on a mouse. Caution Guidelines on using the touch pad Do not touch the touch pad with a sharp or pointed object as doing so may damage the touch pad. Do not remove the cover sheet of the touch pad as doing so may damage the touch pad. Do not use the touch pad with two fingers, wearing gloves, or wet hand as it may not function correctly. Using the touch pad with a dirty or oily finger may damage the touch pad. Do not exert too much pressure on the touch pad as doing so may result in injuries to your finger or wrist.

- 64 -

Moving the pointer on the screen Gently place your finger on the touch pad and slide it in the direction in which you want the pointer to move. Making the selection (Click) To click a button, quickly press and release the left button. You can click the left button or gently tap the touch pad once to select an item on a menu or an icon on the screen, or position the cursor in a document. OR

- 65 -

Double-click (Run) To double-click a button, quickly press and release the left button twice. You can also tap the touch pad twice to get the same result. To launch an application, you can select and double-click the .exe file or the program icon.

- 66 -

Drag and drop To drag an object, select and move the object by clicking and holding the left button and sliding the finger across the touch pad without releasing the button. To drop the object you have just dragged, release the left button. You can use drag and drop to move files from one location to another. For example, if you want to place a file in the recycle bin, place the pointer above the file you want to move, press the left button and hold, slide your finger across the touch pad to move the file and release the left button above the recycle bin. Drag: Move the icon without releasing the left button Drop: Release the left button above the recycle bin.

- 67 -

ClickLock: enables you to select text or drag a file without having to continuously hold down the mouse button or touch pad button. Follow the instruction below to enable ClickLock. If ClickLock is enabled, you can hold down the mouse button or touch pad button for a moment and then release it, and still get the same effect as continuously holding down the button. You can drag an object with ClickLock enabled and press again to release the button and drop the object. Click and open the Mouse Properties window. On the Buttons tab, under ClickLock, select Turn on ClickLock check box. Click Settings and adjust how long you need to hold down a mouse or touch pad button to enable ClickLock, and then Select [OK].

- 68 -

Using the scroll up/down function Your computer supports scroll function. When using scroll function, mouse cursor at the arrow does not move. Only the scroll function will move. You can use the scroll up/down function by pressing Fn + direction key. In a program window with a scroll bar, you can move up and down the windows using Fn + direction key. When you scroll a window using the scroll up/down function, the pointer on the screen does not move

- 69 -

System Setup The system setup saves your computers hardware configurations in CMOS RAM. The system setup provides you with information, such as the size and type of your hard disk, size of the installed memory, date, and time. Starting the system setup Setting a password. (Page 71) Changing or removing the password. (Page 74) Recovering the factory default settings. (Page 75) Caution Do not change the system setup arbitrarily. Incorrect system setup may result in errors while using the computer. The menu and default factory settings of the BIOS Setup Utility may look different from this manual. They may have been changed to improve the performance of the system. Keys used in the system setup Enter: Select the current item. Esc: Close the current window or move to the previous window. CursorControl Keys: Move up, down, left, and right.

+ -: Increase and decrease the value. Page Up: Move to the first item. Page Down: Move to the last item. F10: Save and exit the system setup. Note:

Cursor control keys (arrow keys) move the cursor up, down, to the left and right.

- 70 -

Turn on the computer. When LG logo appears on the screen, press F2. The BIOS Setup Utility window appears. Setting a password If you want to protect the system setup from an unauthorized user, follow the instructions below to set a password. You can set a password in the BIOS Setup Utility program. Caution If you forget the password, you cannot gain access to your system. Make sure you write down the password in a safe place only you can refer to in case you forget the password. Setting a supervisor password A password protects your computer from unauthorized users. The factory default

- 71 -

setup does not have a password. A supervisor password prevents unauthorized users from changing the system setup. Start the BIOS Setup Utility. Use arrow keys to select Set Supervisor Password under Security menu, and then press Enter. Note:

You can use a supervisor password to gain access and change items in the BIOS Setup Utility, and select Power on Boot. We recommend using a user password if someone else has to use the computer. If the following message appears, enter a new password and press Enter. A password must be consisted of character A~Z and numbers 0~9, and have the maximum length of 8. If the following message appears, press Enter. Press F10 to save the new settings.

- 72 -

If the following message appears, select [Yes] and press Enter to restart the computer. Setting a user password A user password is a secondary compared to a supervisor password. You must set a supervisor password in order to set a power-on password. Start the BIOS Setup Utility and use arrow keys to select Security menu. Use arrow keys to select Set User Password and press Enter. Note:

A power-on password gives limited access for changing the settings in the BIOS Setup Utility compared to a supervisor password. If the following message appears, enter a new password and then press Enter. A password must be consisted of character A~Z and numbers 0~9, and have the maximum length of 8.

- 73 -

If the following message appears, press Enter. Press F10 to save the new settings. If the following message appears, select [Yes] and press Enter to restart the computer. Changing or removing the password You must know the password to change or remove it. Start the BIOS Setup Utility, enter your password, and then press Enter. To change the password, follow the instruction on Setting a password. To remove the password, follow the instructions below. Use arrow keys to select Security menu, and select a password you want to remove, and then press Enter. If the following message appears, enter the current password in the bracket next to Enter Current Password, and then press Enter. Press Enter without entering a password in the brackets next to Enter New Password and Confirm New Password. If the following message appears, press Enter.

- 74 -

Press F10 to save the new settings. If the following message appears, select [Yes] and press Enter to restart the computer. Recovering the factory default settings If a user accidentally modifies the system setup, follow the instruction below to recover the factory default settings. Start the BIOS Setup Utility, and use arrow keys to select Exit. Use arrow keys to select Load Setup Defaults, and press Enter. If the following message appears, select [Yes] and press Enter to recover the factory default settings. Press F10 to save the new settings. If the following message appears, select

[Yes] and press Enter to restart the computer.

- 75 -

System Recovery System Recovery offers to format the hard disk as shipping statement of the product. User must make backup files to minimize a risk of losing data. Windows CD is not provided separately the product which offers system recovery contracted by Microsoft. Using Full Recovery To recover hard disk completely user must make backup for all software and data on the computer. If Windows installation is complete, user must fill out Windows user registration information as the first time to buy the product. 1. Press F11 with appearing preload image on the screen. 2. If the following screen appears, select one of items for work.

- 76 -

3. Select [Full Recovery without Format], or [Full Recovery after format].

* In the case of selecting [Full Recovery without Format].

- 77 -

[Recovering factory default] appears.

* In the case of selecting [Full Recovery after format]

Click [Start Recovery] .

- 78 -

"Formatting to NTFS" appears. When starting [Full Recovery], next procedures appears on the screen. If the following screen appears after restarting system, fill out Windows user registraion information. When clicking [Finish], the system returns to normal.

- 79 -

Driver re-installation 1. Turn on the computer and go to [Start]-[All Programs]-[GILJABI]. 2. Select the device driver you want to install. 3. Follow the instructions to complete the installation. Some device drivers require you to restart the computer after the installation.

- 80 -

Installing memory When you are using the computer, you may want to increase the memory capacity. About memory Your computer uses DDR (Double Data Rate) SDRAM SO-DIMM(Dual In-Line Memory Module) with 200 pins. Each memory socket can support a memory module from 64MB to 1024MB, and the maximum memory capacity of the computer is 2048MB. Before installing memory When installing or removing the memory modules, be careful not to expose them to the static electricity as it can damage the modules. Make sure the type of memory installed in your computer is the same as the memory you are about to install. Note:

Use only the correct type of memory module (DDR SDRAM using 2.5V). Different models of computer can use different memory modules. DDR memory has higher data-transfer rate and different shape compared to the typical memory. DDR SDRAM SDRAM Caution Your computer supports PC2700/DDR SDRAM SO-DIMM 333MHz/266MHz/200MHz with FSB Frequency of 400MHz.

- 81 -

Warning Before disassembling the computer for upgraing purposes, turn off the power and remove the power cord, phone line, and battery pack. There is the risk of electric shock or fire. If you need to open the computer cover, contact the customer service for help. Purchasing memory Be sure to buy the correct type of memory modules for your computer. Type: PC2700 (200 pin DDR SDRAM SO-DIMM) Speed: 333MHz (166MHz X2), 266MHz (133MHz X2), 200MHz (100MHz X2) Size: 128MB, 256MB, 512MB, 1024MB Installing memory Main board configuration, memory socket, and memory module may look different in different models of computer. Loosen the screw at the bottom of the computer, and remove the memory slot cover. Note:

Before removing the cover, shut down your computer, remove AC adaptor and battery pack, and detach any device or cable that are attached to the computer.

- 82 -

Use the notch on the memory to make sure the memory aligns with the socket, and then inserts the memory into the socket at an angle of approximately 30 degrees. Note:

Push down the memory until the latch firmly secures the memory on the socket. Push down the memory until you hear a click.

- 83 -

Caution Use only the memory module sold by LG. Using other memory modules can damage your computer. Close the cover and tighten the screw. After the installation, reboot the computer. If you see an error message regarding memory capacity, click F2 to enter the BIOS Setup Utility and save the settings. Note:

When rebooting the computer, make sure the size of installed memory is correct. If different, re-install the memory module.

- 84 -

Inserting SD Memory Card Turn on the computer, and place the SD Memory Card in the SD Memory Card slot. Note: It may look different product by its option. Push the SD Memory Card into the slot until it clicks. Removing SD Memory Card 1. Press the SD Memory Card with the tip of your finger. 2. The SD Memory Card ejects.

- 85 -

Features Model LU20 Processor Intel Mobile Pentium-M processor

(L2 cache: 1024KB, Micro-FCBGA package : 1.4GHz or more) Mobile Intel Celeron Processor

(L2 cache: 512KB, Micro-FCBGA package : 1.3GHz or more) Note: The CPU cannot be replaced or upgraded by the user. The computer is equipped with a different CPU depending on the model type. Memory Built-in: 256MB DDR SDRAM SO-DIMM Maximum: 1024MB on each slot and 2048MB combined Memory Type: DDR SDRAM SO-DIMM (128MB, 256MB, 512MB, and 1024MB) BIOS ROM ROM: 8Mbit Storage devices 2.5-inch hard disk drive (The capacity of the hard disk drive is different depending on the model type.) PC Card slot SD Memory Card slot

- 86 -

External I/O Interfaces External monitor port PC Card slot Microphone jack Speaker/Headphone jack 3 Universal Serial Bus (USB) port RJ11 Modem port RJ45 Ethernet port IEEE 1394 port SD Card slot Display Intel 855GME Internal Graphic Controller Video Memory: 64MB (Using Dynamic Memory Allocation Technology) Sound ANALOG DEVICES AC97 SoundMAX Codec (AD1981B) Built-in Stereo Speaker LCD 12.1 : XGA (1024X768) TFT Color LCD Modem QCOM MD560LMI (MDC Card) RJ11 Telephone connector. Blue Tooth + Modem AMBIT T60M665 (BMDC) LAN 3COM 3c920 RJ45 Ethernet connector

- 87 -

Power specification AC Adapter (Free Voltage) Power capacity: 65W Input: AC 100 ~ 240V, 1.6A, 50 ~ 60Hz Output: DC 18.5V, 3.5A Note: Use the correct adapter for your computer. Battery Pack (Li-Ion) DC 11.1V, 3600 mAh / 3800 mAh (6-cell) Charging time Less than 3 hours with the power off in room temperature (9.6 ~ 40 C/ 49.28

~104 F) More than 16 hours with the power off in low temperature (0 ~ 9.6 C/ 32 ~

49.28 F) Note: The battery cannot be charged below 0 degrees C (32 F). The temperature indicated above is the temperature inside the battery pack; the actual temperature may be different. Battery Life More than 5hours (Battery Mark(TM) V4.0.1) The life time may different from the system configuration. Backup (standby) battery RTC battery Ni-MH Coin 3V 60mm Recommended battery: CR2032 manufactured by Sony, or equivalent type.

- 88 -

Operating environment Operating 10 ~ 35 C(50 ~ 95 F), 20 ~ 80% relative humidity Non-operating

-10 ~ 60 C(14 ~ 140 F), 10 ~ 80% relative humidity

- 89 -

Acknowledging Special Precautions and the FCC Industry Canada Notice Cautions Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio Frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.