FCC ID: BEJTF24SENI Telematics(24CY DCM 5G)

Technical Specification (TF24SENI) FCC ID: BEJTF24SENI TF24SENI TF24SENI IC: 2703H-

Model Name :

1/10 History Ver. Date Contents 1.0 2022.12.02 Written by Checked by Approved by Note 2/10 Contents 1. Product Introduction ................................................................................................. 4 1.2 Environmental Specifications .................................................................................... 4 1.3 Electrical Specifications ............................................................................................. 5 1.3.1 Absolute Maximum Rating and ESD Ratings .......................................................... 5 1.3.2 Current Consumption ..............................................................................................5 1.4 Mechanical Specifications ......................................................................................... 5 1.4.1 Physical Dimensions and Connection Interface ...................................................... 5 1.4.2 Mechanical Drawing ............................................................................................... 6 2. RF Specification .......................................................................................................... 6 2.1 5G NR Specification .................................................................................................. 7 2.2 LTE Specification ...................................................................................................... 7 3/10 1. Product Introduction The TF24SENI are designed for the automotive industry. They support 5G NR, LTE and WCDMA, WIFI air Interface standards. The NAD module which is called as TM15FNNATY0 are based on the Qualcomm SA515M wireless chipsets and support the following bands. Only LTE, 5GNR supported in USA/Canada. Table 1. Supported Band Region NA (North America) NR n2/n5/n12/n66/n77 Band LTE B2/4/5/12/14/66 WCDMA

Only LTE, 5GNR supported in USA/Canada. 1.1 Block Diagram 1.2 Environmental Specifications The environmental specification for operating and storage of the TF24SENI are defined in the table below. 4/10 Table 2. Environmental Specifications Parameter Temperature Range Operating Temperature Storage Temperature

-30 to 95

-40 to 95 Humidity 85% or less 1.3 Electrical Specifications This section provides details for some of the key electrical specifications of the TM15FNNATY0 embedded modules. 1.3.1 Absolute Maximum Rating This section defines the Absolute Maximum Ratings of the TF24SENI embedded modules. Warning: If these parameters are exceeded, even momentarily, damage may occur to the device. 1.4 Mechanical Specifications 1.4.1 Physical Dimensions and Connection Interface The TM15FNNATY0 embedded modules are a Land Grid Array(LGA) form factor device. The device does not have a System or RF connectors. All electrical and mechanical connections are made via the LGA pad on the underside of the PCB. Units mm mm mm mm g Parameter Overall Dimension Table5. TM15FNNATY0 Embedded Module Dimensions Nominal 45 x 39 3.4 1.0 Max 45.35 x 39.35 3.6 1.1 Overall Module Height PCB Thickness Flatness Specification Weight TBD 0.15 5/10 2. RF Specification The specifications for the 5G NR & LTE interfaces are defined. TF24SENI is designed to be compliant with the standard shown in the table below. Table6. Standards Compliance Technology Standards 5G NR LTE 3GPP Release 15 3GPP Release 15

* The transmission of radio equipment is in vehicle use only. 6/10 2.1 5G NR Specification 2.1.1 NR RX Sensitivity The Receiver Sensitivity of the TF24SENI are specified in the following table. Table7. Conducted RX (Receive) Sensitivity NR Bands BAND Method (DL CH) Specification n2 Reference sensitivity level n5 Reference sensitivity level n12 Reference sensitivity level n66 Reference sensitivity level n77 Reference sensitivity level Measure BLER of Mid Channel (392000) in Band2 Measure BLER of Mid Channel (176300) in Band5 Measure BLER of Mid Channel (147500) in Band12 Measure BLER of Mid Channel (431000) in Band66 Measure BLER of Mid Channel (650000) in Band77 sensitivity : -94.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -94.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -93.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -95.6 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -84.1 BLER : 5%

(SCS:30 kHz / BW:100 MHz) 2.2 LTE Specification 2.2.1 LTE RX Sensitivity The Receiver Sensitivity of the TF24SENI are specified in the following table. Table7. Conducted RX (Receive) Sensitivity LTE Bands BAND Method (DL CH) BAND 2 Reference sensitivity level BAND 4 Reference sensitivity level Measure BLER of Mid Channel (900) in Band2 Measure BLER of Mid Channel (2175) in Band4 Specification sensitivity : -94.3 BLER : 5%

sensitivity : -96.3 BLER : 5%

7/10 BAND 5 Reference sensitivity level BAND 12 Reference sensitivity level BAND 14 Reference sensitivity level BAND 66 Reference sensitivity level Measure BLER of Mid Channel (2525) in Band5 Measure BLER of Mid Channel (5095) in Band12 Measure BLER of Mid Channel (5330) in Band14 Measure BLER of Mid Channel (66886) in Band66 sensitivity : -94.3 BLER : 5%

sensitivity : -93.3 BLER : 5%

sensitivity : -93.3 BLER : 5%

sensitivity : -95.8 BLER : 5%

8/10 Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user. 9/10 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence qui sont conformes aux RSS exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. Son fonctionnement est soumis aux deux conditions suivantes:(1) Cet appareil ne doit pas provoquer d'interfrences.(2) Cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable de l'appareil. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. Cet appareil doit tre install et utilis avec un minimum de 20 cm entre le radiateur et votre corps. 10/10

ID Label Information Model Name : TF24SENI FCC ID : BEJTF24SENI Contains FCC ID : BEJTM15FNNATY0 IC : 2703H-TF24SENI Contains IC : 2703H-TM15FNNATY0 1.2 Label Location Drawing The laser marking shown shall be permanently marked at a conspicuous location on the device.

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-23-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: BEJTF24SENI LG Electronics USA certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Heejae Cho Rev 1/26/2023 LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-23-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: BEJTF24SENI LG Electronics USA certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Heejae Cho Rev 1/26/2023

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 02/23/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 FCC ID: BEJTF24SENI To Whom It may Concern:

Request of Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA, Inc.. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA, Inc.. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT & SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Description Exhibit 1 2 3 4 5 6 7 8 9 Block Diagram Schematics Part Lists Operation Description NA Internal Photos External Photos Test-Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 02/23/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Geunki Son of Dt&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: BEJTF24SENI including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of Dt&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from LG Electronics USA. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02/23/2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: BEJ LG Electronics USA (the applicant) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information:

FRN: 0023476120 Name: LG Electronics USA Address: 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Contact Person: Heejae Cho Tel.: 201-470-2696 Email: heejae.cho@lge.com Sincerely, LG Electronics USA Heejae Cho Rev 1/26/2023