FCC ID: BEJTM05FNNAGM0 Telematics Module

User Manual

(TM05FNNAGM0 Alt. TM05FNNAGM1) BEJTM05FNNAGM0 [FCC ID]

2703H-TM05FNNAGM0 [ISED ID]

1/12 History Ver. Date Contents Written by Checked by Approved by Note 1.0 1.1 2022.07.25 2022.01.02 Namjun Park 2/12 Contents 1. Product Introduction ................................................................................................. 4 1.1 Block Diagram ........................................................................................................... 4 1.2 Environmental Specifications .................................................................................... 5 1.3 Electrical Specifications ............................................................................................. 5 1.3.1 Absolute Maximum Rating and ESD Ratings .......................................................... 5 1.3.2 Current Consumption .............................................................................................. 6 1.4 Mechanical Specifications ......................................................................................... 6 1.4.1 Physical Dimensions and Connection Interface ...................................................... 6 1.4.2 Mechanical Drawing ............................................................................................... 7 2. RF Specification .......................................................................................................... 8 2.1 5G NR Specification .................................................................................................. 8 2.2 LTE Specification ...................................................................................................... 9 2.3 WCDMA Specification ............................................................................................. 10 3/12 1. Product Introduction The TM05FNNAGM0 are designed for the automotive industry. They support 5G NR, LTE and WCDMA air Interface standards. The TM05FNNAGM0 are based on the Qualcomm SA515M wireless chipsets and support the following bands. Table 1. Supported Band Region NA (North America) n2/n5/n7/n12/n13/n14/n25/n26/

n29(Rx only)/n30(Rx only)/n41/n66

/n71/n77/n78 NR LTE Band MX (Mexico)

B2/B4/B5/B7/B12/B13/B14/

B29(Rx only)/B30(Rx only)/B66 B2/B4/B5/B12/B13/B14/B17/B28

/ B29(Rx only)/B30(Rx only)/B66 WCDMA B2/B4/B5 B2/B4/B5 1.1 Block Diagram CONFIDENTIAL REFER TO SEPARATED DOCUMENT Figure 1.1. TM05FNNAGM0 Block diagram 4/12 1.2 Environmental Specifications The environmental specification for operating and storage of the TM05FNNAGM0 are defined in the table below. Table 2. Environmental Specifications Parameter Temperature Range Operating Temperature Storage Temperature Humidity

-40 to 90

-40 to 95 95% or less 1.3 Electrical Specifications This section provides details for some of the key electrical specifications of the TM05FNNAGM0 embedded modules. 1.3.1 Absolute Maximum Rating This section defines the Absolute Maximum Ratings of the TM05FNNAGM0 embedded modules. Warning: If these parameters are exceeded, even momentarily, damage may occur to the device. Max 6 6 Units V V Table 3. Absolute Maximum Ratings (input voltage of PMIC) Min

Parameter VPH_PWR Power Supply Input VIN Voltage on any digital input or output pin

5/12 1.3.2 Current Consumption Table 4. TM05FNNAGM0 Current Consumption (@3.9V) Mode Parameter Typical Max Units LTE Max TX Output /Full RB WCDMA Max TX Output /Full RB LTE Idle, Registered WCDMA Idle, Registered 550 550 2 2 TBD TBD

mA mA mA mA 1.4 Mechanical Specifications 1.4.1 Physical Dimensions and Connection Interface The TM05FNNAGM0 embedded modules are a Land Grid Array(LGA) form factor device. The device does not have a System or RF connectors. All electrical and mechanical connections are made via the LGA pad on the underside of the PCB. Table5. TM05FNNAGM0 Embedded Module Dimensions Nominal 55 x 43 Parameter Overall Dimension Overall Module Height 3.5 PCB Thickness 1.0 Flatness Specification Weight TBD Max 55.35 x 43.35 3.7 1.1 0.15 Units mm mm mm mm g 6/12 1.4.2 Mechanical Drawing 1.4.2.1 NAD PCB

[TOP View_Without shield Can cover] [TOP View_With shield Can cover]

[SIDE View_With shield Can cover]

7/12 2. RF Specification The specifications for the 5G NR, LTE and WCDMA interfaces are defined. TM05FNNAGM0 is designed to be compliant with the standard shown in the table below. Table6. Standards Compliance Technology Standards 5G NR LTE WCDMA GSM*

3GPP Release 15 3GPP Release 15 3GPP Release 9 3GPP Release 9

* This product does not use GSM. 2.1 5G NR Specification 2.1.1 NR RX Sensitivity The Receiver Sensitivity of the TM05FNNAGM0 are specified in the following table. Table7. Conducted RX (Receive) Sensitivity NR Bands BAND Method (DL CH) Specification n2 Reference sensitivity level n5 Reference sensitivity level n7 Reference sensitivity level n12 Reference sensitivity level n13 Reference sensitivity level n14 Reference sensitivity level n25 Reference sensitivity level Measure BLER of Mid Channel (392000) in Band2 Measure BLER of Mid Channel (176300) in Band5 Measure BLER of Mid Channel (531000) in Band7 Measure BLER of Mid Channel (147500) in Band12 Measure BLER of Mid Channel (150200) in Band13 Measure BLER of Mid Channel (152600) in Band14 Measure BLER of Mid Channel (392500) in Band25 sensitivity : -91.1 BLER : 5%

(SCS:15 kHz / BW:20 MHz) sensitivity : -90.1 BLER : 5%

(SCS:15 kHz / BW:20 MHz) sensitivity : -91.1 BLER : 5%

(SCS:15 kHz / BW:20 MHz) sensitivity : -83.3 BLER : 5%

(SCS:15 kHz / BW:15 MHz) sensitivity : -93.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -93.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -89.6 BLER : 5%

(SCS:15 kHz / BW:20 MHz) 8/12 n26 Reference sensitivity level n29 Reference sensitivity level n30 Reference sensitivity level n41 Reference sensitivity level n66 Reference sensitivity level n71 Reference sensitivity level n77 Reference sensitivity level n78 Reference sensitivity level Measure BLER of Mid Channel (175300) in Band26 Measure BLER of Mid Channel in Band29 Measure BLER of Mid Channel (471000) in Band30 Measure BLER of Mid Channel (518598) in Band41 Measure BLER of Mid Channel (431000) in Band66 Measure BLER of Mid Channel (126900) in Band71 Measure BLER of Mid Channel (650000) in Band77 Measure BLER of Mid Channel (636667) in Band78 sensitivity : -87.6 BLER : 5%

(SCS:15 kHz / BW:20 MHz) sensitivity : -93.8 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -95.1 BLER : 5%

(SCS:15 kHz / BW:10 MHz) sensitivity : -84 BLER : 5%

(SCS:30 kHz / BW:100 MHz) sensitivity : -92.6 BLER : 5%

(SCS:15 kHz / BW:20 MHz) sensitivity : -85.3 BLER : 5%

(SCS:15 kHz / BW:20 MHz) sensitivity : -84.1 BLER : 5%

(SCS:30 kHz / BW:100 MHz) sensitivity : -84.6 BLER : 5%

(SCS:30 kHz / BW:100 MHz) 2.2 LTE Specification 2.2.1 LTE RX Sensitivity The Receiver Sensitivity of the TM05FNNAGM0 are specified in the following table. Table7. Conducted RX (Receive) Sensitivity LTE Bands BAND Method (DL CH) BAND 2 Reference sensitivity level BAND 4 Reference sensitivity level BAND 5 Reference sensitivity level Measure BLER of Mid Channel (900) in Band2 Measure BLER of Mid Channel (2175) in Band4 Measure BLER of Mid Channel (2525) in Band5 Specification sensitivity : -94.3 BLER : 5%

sensitivity : -96.3 BLER : 5%

sensitivity : -94.3 BLER : 5%

9/12 BAND 7 Reference sensitivity level BAND 12 Reference sensitivity level BAND 13 Reference sensitivity level BAND 14 Reference sensitivity level BAND 28 Reference sensitivity level BAND 29 Reference sensitivity level BAND 30 Reference sensitivity level BAND 66 Reference sensitivity level Measure BLER of Mid Channel (3100) in Band7 Measure BLER of Mid Channel (5095) in Band12 Measure BLER of Mid Channel (5230) in Band13 Measure BLER of Mid Channel (5330) in Band14 Measure BLER of Mid Channel (9435) in Band28 sensitivity : -94.3 BLER : 5%

sensitivity : -93.3 BLER : 5%

sensitivity : -93.3 BLER : 5%

sensitivity : -93.3 BLER : 5%

sensitivity : -94.8 BLER : 5%

Measure BLER of Mid Channel (9715) in Band29 CA operation Measure BLER of Mid Channel (9820) in Band30 CA operation Measure BLER of Mid Channel (66886) in Band66 sensitivity : -95.8 BLER : 5%

2.3 WCDMA Specification 2.3.1 WCDMA RX Sensitivity The Receiver Sensitivity of the TM05FNNAGM0 are specified in the following table. Table8. Conducted RX (Receive) Sensitivity WCDMA Bands Item Method (DL CH) Specification BAND2 BER(Bit Error Rate) BAND4 BER(Bit Error Rate) BAND5 BER(Bit Error Rate) Measure BER of Middle Channel (CH=9800) in Band2 0.1% @-106.7dBm Measure BER of Middle Channel (CH=1675) in Band4. 0.1% @-106.7dBm Measure BER of Middle Channel (CH=4400) in Band5 0.1% @-106.7dBm 10/12 Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 17 cm between the radiating element of this device and the user. 11/12 Notice This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 17 cm between the radiator & your body. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. Avis dIndustrie Canada sur lexposition aux rayonnements Cet appareil est conforme aux limites dexposition aux rayonnements dIndustrie Canada pour un environment non contrl. Il doit tre install de faon garder une distance minimale de 17 centimtres entre la source de rayonnements et votre corps. REMARQUE: LE FABRICANT N'EST PAS RESPONSABLE DES INTERFRENCES RADIOLECTRIQUES CAUSES PAR DES MODIFICATIONS NON AUTORISES APPORTES CET APPAREIL. DE TELLES MODIFICATIONS POURRAIT ANNULER L'AUTORISATION ACCORDE LUTILISATEUR DE FAIRE FONCTIONNER L'APPAREIL. Operation is subject to the following two conditions:

1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. Lexploitation est autorise aux deux conditions suivantes :

1.Lappareil ne doit pas produire de brouillage;

2.Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 12/12 KDB 996369 D03 OEM Manual, Integration Isntructions 2.2 List of Applicable FCC Rules Part 22, 24, 27, 90 2.3 Summarize the specific operational use conditions Single module, vehicle-use only. Only vehicle manufacturer can use/install this device on their vehicle. 2.4 Limited module procedure N/A 2.5 Trace antenna designs N/A 2.6 RF Exposure consideration RF Exposure evaluation was performed with very specific installation condition at 17 cm. Any other installation condition may require additional test and permissive change procedure. 2.7 Antennas The product test was performed with metal antenna. Any other antenna may require additional test and permissive change procedure. 2.8 Label and compliance information Host equipment shall have compliance information and label information Contains FCC ID with FCC ID: BEJTM05FNNAGM0 Notice;

The host manufacturer is responsible for additional testing to verify compliance as a composite system. when testing the host device for compliance with part 15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation should confirm that the module's intentional emissions are compliant. The host manufacturer must vertify that there are no additional unintentional emissions other than what is permitted in part 15 Subpart B or emissions are complaint with the transmitter rule. The grantee will provide guidance to the host manufacurer for part 15 Subpart B requirements if needed. 11/11

Label Information FCCID:BEJTM05FNNAGM0 IC:2703HTM05FNNAGM0 0 0 0 0 0 0 0 0 0 0 0 EBR12345678 0 0 0 0 0 0 0 0 0 0 0 IC:2703HTM05FNNAGM0 FCCID:BEJTM05FNNAGM0 EBR12345678

(FID,22digits)

LG Electronics USA 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, United States, 07632 February 17, 2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 LETTERFORAUTHORIZATION FCC ID: BEJTM05FNNAGM0 Towhomitmayconcern:

I,theundersigned,herebyauthorizeSGS KoreaCo.,Ltd. andhereafterreferredtoasSGS Korea,toactonourbehalfinallmannersrelatingtoapplicationforequipmentauthorization, includingsigningofalldocumentsrelatingtothesematters.Anyandallactscarriedoutby SGSKoreaCo., Ltd.onourbehalfshallhavethesameeffectasactsofourown. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includesFCCbenefits,pursuanttoSection5301oftheAntiDrugAbuseActof1988,21U.S.C. 853(a). InauthorizingSGSKoreaasouragent,westillrecognizethatweareresponsibleto:

a) complywiththerelevantprovisionsofthecertificationprogram;

b) makeallnecessaryarrangementsfortheconductoftheevaluation,includingprovision forexaminingdocumentationandaccesstoallareas,records(includinginternalaudit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment,surveillance,reassessment)andresolutionofcomplaints;

c) makeclaimsregardingcertificationonlyinrespectofthescopeforwhichcertification hasbeengranted;

d) do not use our product certification in such a manner as to bring the Certification Divisionintodisreputeandnotmakeanystatementregardingourproductcertification whichtheCertificationDivisionmayconsidermisleadingorunauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any referencethereto and returnanycertification documents as requiredbytheCertificationDivision;

f) usecertificationonlytoindicatetheproductsarecertifiedasbeinginconformitywith specifiedstandards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleadingmanner;

h) ensurethatanyreferencetoourproductcertificationincommunicationmediasuchas documents, brochures or advertising, complies with the requirements of the CertificationDivision;

LG Electronics USA 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, United States, 07632 i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records availabletotheCertificationDivisionwhenrequested;

takeappropriateactionwithrespecttosuchcomplaintsandanydeficienciesfoundin productsorservicesthataffectcompliancewiththerequirementsforcertification;

k) documenttheactionstaken. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours Mr. Heejae Cho Director, Regulatory & Environmental Affairs LG Electronics USA, Inc.

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name LG Electronics USA Applicant Declaration Address Grantee Code FCC ID Authorized Contact Name Contact Email Contact Phone 111 Sylvan Ave, North Building, Englewood Cliffs, NJ 07632 United States BEJ BEJTM05FNNAGM0 Heejae Cho heejae.cho@lge.com 201-470-2696 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List LG Electronics USA (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. LG Electronics USA (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date: February 17, 2023 Print Name: Heejae Cho Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Director, Regulatory and Environmental Affairs QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

LG Electronics USA 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey, United States, 07632 February 17, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 REQUEST FOR CONFIDENTIALITY FCC ID: BEJTM05FNNAGM0 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows:

Long-Term CONFIDENTIAL LIST Short-Term 1 2 3 4 5 6 7 8 9 10 External Photos Internal Photos Test-Setup Photos User Manual Operational Description Block Diagram Schematics PCB Layout Part List Tune-Up Procedure The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours Heejae Cho Director, NA Regulatory & Environmental Affairs LG Electronics USA, Inc.

Cover Letter-Modular Approval FCC ID: BEJTM05FNNAGM0 Date: 21 February 2023 Gentlemen:

Theres a Cellular Module that would like to have your authorization as a modular approval. The specific product as below, Cellular Module, with its designed features and specified description, meets special requirements for full modular approval on Requirement of FCC KDB996369 by cross-reference list below. Company Model Name Model Number FCC ID LG Electronics Inc. Telematics Module TM05FNNAGM0 BEJTM05FNNAGM0 Comply(Y/N) a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly;

b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal;

c) The module must contain power supply regulation on the module;

d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b);

e) The module must contain power supply regulation on the module;

f) The module must demonstrate compliance in a stand-alone configuration; 6) The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748);

g) The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee;

h) The module must comply with RF exposure requirements (see Clause V below). Y Y Y Y Y Y Y Y Thank you. Sincerely, By:

Heejae Cho

(Print name) Title: Director, Regulatory and Environmental Affairs On behalf of:

LG Electronics Inc.

(Company Name) Telephone:

201-470-2696

PRODUCTEQUALITYDECLARATION ProductEquality January4,2023 We,asamanufacturer,herebydeclarethatourproducthasvariantmodelnamesaslistedbelow. Eachmodelhasadifferentconfigurationandentiretestwasperformedwithbasicmodel.Thereisnotechnical differenceamongthelistedmodelsthathavedifferentconfigurations. BasicModel VariantModel ModelName TM05FNNAGM0 TM05FNNAGM1 Description DualGNSS SameRFcircuit andPCB as basicmodelexpectGNSSPart SingleGNSS SincerelyYours HeeJaeCho Director,NARegulatory&EnvironmentalAffairsLG ElectronicsUSA

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-02-21 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: LG Electronics USA Grantee Code:

BEJ Contact Name:

Heejae Cho Address:

111 Sylvan Ave, North Building, Englewood Cliffs City/Province/Zip: Englewood Cliffs/New U.S. designated agent Company Name: LG Electronics USA FRN:

Contact Name:

Address:

0023476120 Heejae Cho 111 Sylvan Ave, North Building, Englewood Cliffs City/Province/Zip: Englewood Cliffs/New Telephone:

Fax:

Email:

Jersey/07632 201-470-2696 201-816-2003 Heejae.cho@lge.com Telephone:

Fax:

Email:

Jersey/07632 201-470-2696 201-816-2003 Heejae.cho@lge.com Applicable Equipment: FCC ID: BEJTM05FNNAGM0 ATTN: Director of Certification:

We, LG Electronics USA, understand and acknowledge the applicants consent and the designated agents obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, LG Electronics USA, acknowledge the applicants acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name Heejae Cho Name (Printed): Heejae Cho Title: Director, Regulatory and Environmental Affairs Signature:

Title: Director, Regulatory and Environmental Affairs Signature: