FCC ID: BEJTLVUM3IU-N Telematics

TLVUM3IU-N

(OnlineConnectivityUnit) LG Electronics Inc. WhatistheOCU(OnlineConnectivityUnit) The OCU stands for Online Connectivity Unit Its a telematics device that LGE is developing for the Volkswagen vehicles. It is a small box installed deep inside passenger cars, and in charge of wireless communications in GSM, WCDMA and LTE network It provides voice and data call functions and various online services requested by VW Power, CAN, Audio and other data connector WCDMA/LTE DRx A ntenna Connector GNSS Antenna C onnector GSM/WCDMA/LTE Antenna Connector Product Image/ Function ProductImage Function TelematicsproductsupportingEmergencyCall/LTEservice Emergency Call Mobile Online Services Positioning/Dead Reckoning

-GPS, GLONASS, Galileo, BeiDou and QZSS Specification Specification Dimension SupportingBands GSM850/1900 WCMDAB2/B4/B5 LTEFDDB2/B4/B5/B12/B13/B17 ModemChip QualcommMDM9240 GNSS Bluetooth WiFi Size Weight Power GPS,GLONASS,Galileo,BeiDou and QZSS No No 130mmx70.14mmx37.5mm 300g DC 12V,2A The OCU3 Features Concept Major Services Safety & Security Services Oriented Telematics Terminal GNSS OCU Equipped Vehicles Emergency Call Automatic Collision Notification Call Road Side Assistance Call Vehicle Tracking Call Services

- Emergency Call

- Automatic Collision Notification Call

- Information Call

- Road Side Assistance Call Remote Function Services

- Honking And Flashing

- Speed Alert

- Vehicle Disabling

- Battery Charge Management

- Departure Time Programming

- Door Lock / Unlock

- Pre-Trip Climatisation

- Trip Statistics

- Vehicle Status Geo-Fencing POI Address Import Vehicle Health Report Vehicle Tracking Notice FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Major Services This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user. Major Services IC This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that necessary for successful communication. Le prsent metteur radio a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user. Cet appareil doit tre install et utilis avec une distance minimale de 20 cm entre l'lment rayonnant de cet appareil et l'utilisateur.

XXX XXX XXX SW XXXX XXS HW XXX LGS V Telematics FCC ID : BEJTLVUM3IU-N Online Connectivity Unit IC : 2703H-TLVUM3IUN MADE IN VIETNAM LG Becomes. IMEI XXXXXXXXXXXXXXX IE CID XXXXXXXXXAXXXXXKKKAK LG SIN 710VHAB000001 ae &

LGS-LGHDD.MM.YY00010001

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-15-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:

BEJTLVUM3IU-N LG Electronics USA certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Heejae Cho Rev 1/26/2023 LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-15-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:

BEJTLVUM3IU-N LG Electronics USA certifies that, as of the date of the filing of the application, the applicant List as an entity producing is covered equipment. identified on the Covered not Sincerely, Heejae Cho Rev 1/26/2023

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05/15/2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: BEJ LG Electronics USA (the applicant) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information:

FRN: 0023476120 Name: LG Electronics USA Address: 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Contact Person: Heejae Cho Tel.: 201-470-2696 Email: heejae.cho@lge.com Sincerely, LG Electronics USA Heejae Cho Rev 1/26/2023

LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 05/15/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Geunki Son of Dt&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: BEJTLVUM3IU-N including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of Dt&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from LG Electronics USA, Inc.. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 05/15/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 FCC ID: BEJTLVUM3IU-N To Whom It may Concern:

Request of Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA, Inc.. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA, Inc.. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT & SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Description Exhibit 1 2 3 4 5 6 7 8 9 Block Diagram Schematics Part Lists Operation Description Tune-up Procedure Internal Photos External Photos Test-Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs