all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.73 MiB | ||||
1 | Attestation Statements | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 1.73 MiB |
USER GUIDE Wireless ADSL2+ Modem Router Model: X2000 About This Guide About This Guide Copyright and Trademarks registered the Cisco Logo Linksys, Cisco and or trademarks are Systems, Inc. trademarks of Cisco and/or its affiliates in the U.S. and certain other countries. Other brands and product names are registered trademarks of their respective holders. Copyright 2009 Cisco Systems, Inc. All rights reserved. trademarks or Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons:
NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning of potential risk of bodily injury and/or it is something that could damage your property or product. WEB: This globe icon indicates a noteworthy website address or e-mail address. Online Resources Website addresses in this document are listed without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address. Resource Website Linksys www.linksysbycisco.com Linksys International www.linksysbycisco.com/international Glossary www.linksysbycisco.com/glossary Network Security Web Technical Support www.linksysbycisco.com/security www.linksysbycisco.com/support Wireless ADSL2+ Modem Router i Table of Contents Chapter 1:
Product Overview 1 Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Placement Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Chapter 2:
Wireless Security Checklist 3 General Network Security Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 3:
Advanced Configuration 4 How to Access the Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Using the Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 List of Screens in the Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Wireless Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Security Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Access Restrictions Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Applications & Gaming Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Administration Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appendix B:
Specifications 8 X2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Appendix A:
Troubleshooting 10 Appendix C:
Regulatory Information 11 European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 New Zealand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 United States of America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Wireless ADSL2+ Modem Router ii Chapter 1 Product Overview DSL (Green) The DSL LED lights up whenever there is a successful DSL connection. The LED flashes green while the Modem Router is establishing the ADSL connection. Internet (Green/Red) The Internet LED lights up green and stays on when a connection is made through the Internet port. It flashes to indicate network activity over the Internet port. The LED is lit red when an authentication error occurs. Back Panel DSL The DSL port connects to the ADSL line. Ethernet 3, 2, 1 The Ethernet ports (3, 2, 1) connect the Modem Router to wired computers and other Ethernet network devices. NOTE: The Ethernet 1 port can also be configured as the WAN access the Web-
port. To do this, based utility (refer to Chapter 3:
Advanced Configuration on page 4), then select the Setup > Ethernet tab. Reset There are two ways to reset the Modem Routers factory defaults. Either press and hold the Reset button for approximately five seconds, or restore the defaults from the Administration>Factory Defaults screen of the Modem Routers web-based utility. Power The Power port is where you will connect the power adapter. On/Off Button Press the On/Off button to turn power to the device on or off. Chapter 1:
Product Overview Thank you for choosing the Wireless ADSL2+ Modem Router. This device lets you access the Internet via a wireless connection or through one of its four switched ports. You can also use it to share resources such as computers, printers and files. A variety of security features, such as WPA2 security, a Stateful Packet Inspection (SPI) firewall and NAT technology, help to protect your data and your privacy while online. Configuration is easy using the provided browser-based utility. Front Panel Power The Power LED is continuously lit green while the device is powered on. The LED is lit amber if a POST (Power On Self Test) failure or device malfunction occurs. Ethernet 1-3 (Green) These numbered LEDs, one for each of the numbered ports on the Modem Routers back panel, serve two purposes. If the LED is continuously lit, the Modem Router is successfully connected to a device through that port. It flashes to indicate network activity over that port. NOTE: The Ethernet 1 LED is lit amber when the WAN link is established on that port. Wi-Fi Protected Setup Button Press this button to have Wi-Fi Protected Setup search for your Wi-Fi Protected Setup-supported wireless device. The LED is continuously lit green when a Wi-Fi Protected Setup connection is successfully established. The LED blinks slowly while Wi-Fi Protected Setup is setting up a connection, and is lit amber if an error occurs. The LED is off when Wi-Fi Protected Setup is idle. NOTE: Wi-Fi Protected Setup is a feature that makes it easy to configure your wireless network and its security settings. Wireless (Green) The Wireless LED lights up when the wireless feature is enabled. It flashes when the Modem Router is actively sending or receiving data over the network. Wireless ADSL2+ Modem Router 1 Chapter 1 Product Overview Placement Positions There are two ways to physically install the device. The first way is to place the device horizontally on a surface. The second way is to mount the device on a wall. The best place for the device is usually at the center of your wireless network, within range of all of your wireless devices. Horizontal Placement The device has four rubber feet on its bottom panel. Place the device on a level surface near an electrical outlet. Wall-Mounting Placement The device has two wall-mount slots on its bottom panel. The distance between the slots is 152 mm
(6 inches). Two screws are needed to mount the device. Suggested Mounting Hardware Follow these instructions:
1. Determine where you want to mount the device. Make sure that the wall you use is smooth, flat, dry, and sturdy. Also make sure the location is within reach of an electrical outlet. 2. Drill two holes into the wall. Make sure the holes are 3. 152 mm (6 inches) apart. Insert a screw into each hole and leave 3 mm
(0,12 inches) of its head exposed. 4. Maneuver the device so the wall-mount slots line up with the two screws. 5. Place the wall-mount slots over the screws and slide the device down until the screws fit snugly into the wall-mount slots. 4-5 mm 1-1,5 mm m m 0 3
5 2
, Note: Mounting hardware illustrations are not true to scale. NOTE: Cisco is not responsible for damages incurred by insecure wall-mounting hardware. 152 mm Wall Mounting Template Wireless ADSL2+ Modem Router 2 Chapter 2 Wireless Security Checklist 4. Enable encryption Encryption protects data transmitted over a wireless network. Wi-Fi Protected Access (WPA/WPA2) and Wired Equivalency Privacy (WEP) offer different levels of security for wireless communication. A network encrypted with WPA/WPA2 is more secure than a network encrypted with WEP, because WPA/WPA2 uses dynamic key encryption. To protect the information as it passes over the airwaves, you should enable the highest level of encryption supported by your network equipment. WEP is an older encryption standard and may be the only option available on some older devices that do not support WPA. General Network Security Guidelines Wireless network security is useless if the underlying network is not secure. Password protect all computers on the network and individually password protect sensitive files. Change passwords on a regular basis. Install anti-virus software and personal software. firewall Disable file sharing (peer-to-peer). Some applications may open file sharing without your consent and/or knowledge. Additional Security Tips Keep wireless routers, access points, or modem routers away from exterior walls and windows. Turn wireless routers, access points, or modem routers off when they are not being used (at night, during vacations). Use strong passphrases that are at least eight characters in length. Combine letters and numbers to avoid using standard words that can be found in the dictionary. WEB: For more information on wireless security, visit www.linksysbycisco.com/security Chapter 2:
Wireless Security Checklist Wireless networks are convenient and easy to install, so homes with high-speed Internet access are adopting them at a rapid pace. Because wireless networking operates by sending information over radio waves, it can be more vulnerable to intruders than a traditional wired network. Like signals from your cellular or cordless phones, signals from your wireless network can also be intercepted. Since you cannot physically prevent someone from connecting to your wireless network, you need to take some additional steps to keep your network secure. 1. Change the default wireless network name or SSID Wireless devices have a default wireless network name or Service Set Identifier (SSID) set by the factory. This is the name of your wireless network, and can be up to 32 characters in length. Linksys by Cisco wireless products use linksys as the default wireless network name. You should change the wireless network name to something unique to distinguish your wireless network from other wireless networks that may exist around you, but do not use personal information (such as your Social Security number) because this information may be available for anyone to see when browsing for wireless networks. 2. Change the default password For wireless products such as access points, routers, and modem routers, you will be asked for a password when you want to change their settings. These devices have a default password set by the factory. The default password is admin. Hackers know these defaults and may try to use them to access your wireless device and change your network settings. To thwart any unauthorized changes, customize the devices password so it will be hard to guess. 3. Enable MAC address filtering Linksys by Cisco routers and modem routers give you the ability to enable Media Access Control (MAC) address filtering. The MAC address is a unique series of numbers and letters assigned to every networking device. With MAC address filtering enabled, wireless network access is provided solely for wireless devices with specific MAC addresses. For example, you can specify the MAC address of each computer in your home so that only those computers can access your wireless network. Wireless ADSL2+ Modem Router 3 Chapter 3 Advanced Configuration Chapter 3:
Advanced Configuration After you finish running the Setup Wizard on the Setup CD-ROM, the device is ready for use. To change the devices advanced settings, access the Configuration Utility via a web browser on a computer connected to the device. NOTE FOR USERS IN NEW ZEALAND: Refer to the Note in Setup > Basic Setup, page 5 for setup instructions specific to your country. How to Access the Utility Launch the web browser on your computer, and enter the devices default IP address, 192.168.1.1, in the Address field. Then, press Enter. A login screen appears. Use the default user name and password, admin, unless you changed them when you ran the Setup Wizard. (You can set a new user name and password from the Administration tabs Management screen.) Click OK to continue. Login If you are unable to log in, press the Reset button on the back panel for at least 5 seconds, then wait for the device to reset and try again. Using the Utility Immediately after login, the Basic Setup screen appears. Near the top of the screen is a bar with selectable tabs. Use these tabs to navigate within the Utility. The primary tabs indicate the Utilitys main configuration categories. Each primary tab has one or more secondary tabs that provide access to the primary tabs configuration screens. Primary Tabs Setup Wireless Storage Security Access Applications &
Restrictions Gaming Administration Status Basic Setup Ethernet DDNS MAC Address Clone Advanced Routing Secondary Tabs Navigation Tabs To access a screen, click the appropriate primary tab, then click the appropriate secondary tab. The screen will appear, with its primary and secondary tabs highlighted. List of Screens in the Utility The screens are organized hierarchically as listed below.
(Some screens may not apply to all models.) Setup Tab Setup > Basic Setup Setup > Ethernet Setup > DDNS Setup > MAC Address Clone Setup > Advanced Routing Wireless Tab Wireless > Basic Wireless Settings Wireless > Wireless Security Wireless > Wireless MAC Filter Wireless > Advanced Wireless Settings Storage Tab (WAG320N Only) Storage > Disk Management Storage > Shared Folder Storage > Administration Storage > Media Server Security Tab Security > Firewall Security > VPN Passthrough Access Restrictions Tab Access Restrictions > Internet Access Policy Applications & Gaming Tab Applications & Gaming > Single Port Forwarding Applications & Gaming > Port Range Forwarding Applications & Gaming > Port Range Triggering Applications & Gaming > DMZ Applications & Gaming > QoS Administration Tab Administration > Management Administration > Reporting Administration > Diagnostics Administration > Back Up & Restore Administration > Factory Defaults Administration > Firmware Upgrade Administration > Language Status Tab Status > Modem Router Status > Local Network Status > Wireless Network Status > DSL Connection Wireless ADSL2+ Modem Router 4 Chapter 3 Advanced Configuration Setup Tab The Setup tab provides the devices basic setup functions. For detailed information on the Setup tab, refer to the Utilitys online help pages. Setup > Basic Setup The BasicSetup screen allows you to change the devices general settings. The types
(encapsulations) are available:
following connection RFC 2364 PPPoA RFC 2516 PPPoE RFC 2684 Routed IPoA RFC 2684 Bridged - Dynamic IP Address RFC 2684 Bridged - Static IP Address Bridge Mode Only NOTE FOR USERS IN NEW ZEALAND: To set up the device, follow these instructions:
1. Access the Setup>BasicSetup screen. 2. Select RFC 2364 PPPoA from the Encapsulation drop-down menu. 3. For the Virtual Circuit ID, enter 0 for the VPI and 100 for the VCI. 4. Select VC for Multiplexing. 5. Select Multimode from the DSL Modulation drop-down menu. 6. Enter your User Name and Password details from your ISP. 7. Click Save Settings. Setup > Ethernet The Ethernet screen allows you to configure the devices Ethernet settings. It also allows you to set up the first Ethernet port as a WAN port. Setup > DDNS The DDNS screen allows you to assign a fixed host and domain name to a network computer that has been assigned a dynamic Internet IP address. This is useful when you are hosting your own website, FTP server, or other server behind the device. Setup > MAC Address Clone Some service providers require you to register a MAC address in order to access the Internet. The MACAddress Clone screen lets you use the MAC address of a device that has already been registered with your service provider, by copying that MAC address to the device. Wireless ADSL2+ Modem Router Setup > Advanced Routing The AdvancedRouting screen allows you to configure the devices advanced routing functions, such as operating mode, dynamic mode, and static routing. Wireless Tab The Wireless tab allows you to configure the devices wireless functions. For detailed information on the Wireless tab, refer to the Utilitys online help pages. Wireless > Basic Wireless Settings The BasicWirelessSettings screen allows you to set up a network with Wi-Fi Protected Setup, change the radio band, select the network mode, change the wireless network name (SSID), change the wireless channel and disable the SSID broadcast. Note to US model owner: To comply with US FCC regulation, the country selection function has been completely removed from all US models. The above function is for non-US models only. Wireless > Wireless Security The Wireless Security screen allows you to configure the security of your wireless network(s). It allows you to select from a number of security modes, such as WPA2. Wireless > Wireless MAC Filter The WirelessMACFilterscreen allows you to control (block or allow) Internet access by individual devices on your wireless network by specifying their MAC addresses. Wireless > Advanced Wireless Settings The Advanced Wireless Settings screen allows you to configure the devices advanced wireless functions. Security Tab The Security tab allows you to enhance the security of your network. For detailed information on the Security tab, refer to the Utilitys online help pages. Security > Firewall The Firewall screen allows you to configure a firewall that can filter out various types of unwanted traffic on the devices local network. 5 Chapter 3 Advanced Configuration Security > VPN Passthrough The VPNPassthrough screen allows you to configure the devices VPN passthrough feature. This feature lets VPN tunnels using the IPSec, L2TP, or PPTP protocols to pass through the devices firewall. Access Restrictions Tab The Access Restrictions tab allows you to configure the Internet access restrictions for each device in your network. For detailed information on the Access Restrictions tab, refer to the Utilitys online help pages. Access Restrictions > Internet Access Policy The Internet Access Policy screen allows you to define policies that are used to block or allow specific kinds of Internet usage and traffic, such as Internet access, designated applications, websites, and inbound traffic during specific days and times, and for a specified list of devices in your network. Applications & Gaming Tab The Applications & Gaming tab allows you to configure functions such as port forwarding and quality of service that may be necessary for special applications such as hosting web servers, ftp servers, and e-mail servers on on your network, or other specialized internet applications such as videoconferencing or online gaming. For detailed information on the Applications & Gaming tab, refer to the Utilitys online help pages. Applications & Gaming > Single Port Forwarding The Single Port Forwarding screen allows you to set up port forwarding for a single port. You should assign static IP addresses to the destination computers before you use this feature. Applications & Gaming > Port Range Forwarding The Port Range Forwarding screen allows you to set up port forwarding for a range of ports. You should assign static IP addresses to the destination computers before you use this feature. Applications & Gaming > Port Range Triggering The PortRangeTriggeringscreen allows you to set up port triggering. When port triggering is configured, the device watches for specified port numbers in outgoing data. When a match is found, the device records the sending computers IP address so that when the requested data returns, it can be sent to the proper computer. Applications & Gaming > DMZ The DMZscreen allows you to expose one network user to the Internet for use of a special-purpose service such as Internet gaming or video conferencing. DMZ hosting forwards all the ports at the same time to one computer. You should assign static IP addresses to the destination computers before you use this feature. Applications & Gaming > QoS The QoSscreen allows you to specify priorities for different types of traffic. Lower priority traffic will be slowed down to allow greater throughput or less delay for high priority traffic. Administration Tab The Administration tab allows you to configure the devices administrative functions. For detailed information on the Administration tab, refer to the Utilitys online help pages. Administration > Management The Management screen allows you to manage specific functions for access and security. NOTE ON CISCO WEB ASSISTANT OPTION
(not on all models): If you see an error code 404 message (indicating that you entered an invalid web address), the Cisco Web Assistant will appear and automatically run a search based on the keywords in the web address. This feature can be enabled or disabled from this screen. NOTE ON TREND MICRO OPTION (not on all models): Trend Micro ProtectLink Gateway is a hosted security service that stops spam and filters URLS to prevent unwanted content from passing through your router. The Email Protection is the hosted messaging security solution provided by Trend Micro InterScan Messaging Hosted Security (IMHS). This feature can be enabled or disabled from this screen. Administration > Reporting The Reportingscreen allows you to configure system event logging and to configure sending of e-mail alerts when a Denial of Service attack is detected. Wireless ADSL2+ Modem Router 6 Chapter 3 Advanced Configuration Administration > Diagnostics The Diagnosticsscreen allows you to perform a ping test to check the status of your Internet connection. Administration > Back Up & Restore The BackUp&Restorescreen allows you to back up and restore the configuration settings of your device. Administration > Factory Defaults The Factory Defaults screen allows you to restore the factory defaults of the device. All savings you have saved will be lost NOTE: Restoring the factory defaults causes all settings you have previously saved to be lost. Administration > Firmware Upgrade The FirmwareUpgradescreen allows you to upgrade the devices firmware. Administration > Language The Language screen allows you to select an available language for the utility. Status Tab The Status tab allows you to display status information. For detailed information on the Status tab, refer to the Utilitys online help pages. Status > Modem Router The ModemRouterscreen displays information about the device and its current settings. The on-screen information will vary depending on the Internet Connection Type you use. Status > Local Network The LocalNetworkscreen displays the status of your Local Area Network. Status > Wireless Network The Wireless Network screen displays some basic information about the wireless network of the device. Status > DSL Connection The DSLConnectionscreen displays the status of your DSL connection. Wireless ADSL2+ Modem Router 7 Specifications
-20 to 70C (-4 to 158F) Operating Temp. 0 to 40C (32 to 104F) Storage Temp. Operating Humidity 10 to 85% Noncondensing Storage Humidity 5 to 90% Noncondensing Appendix B Appendix B:
Specifications WLAN: 802.11n draft 2.0, 802.11g, 802.11b Ethernet: 802.3, 802.3u ADSL: T1.413i2, G.992.1 (G.DMT), G.992.2 (G.Lite), G.992.3 (ADSL2), G.992.5 (ADSL2+) for Annex A, B, M, L, U-R2 for Annex B DSL, Ethernet (1-4), Power On/Off, Reset, Wi-Fi Protected Setup Power, Ethernet (1-4), Security, Wireless, DSL, Internet CAT5, RJ-11 (for Annex A), RJ-45 (for Annex B) 2 Internal 802.11b: CCK/QPSK, BPSK 802.11g: OFDM/BPSK, QPSK, 16-QAM, 64-QAM 802.11n: OFDM/BPSK, QPSK, 16-QAM, 64-QAM 802.11b: 17,0 1,0 dBm 802.11g: 15,0 1,0 dBm 802.11n: 13,0 1,5 dBm X2000 Standards Ports Buttons LEDs Cabling Type Antennas Modulations Transmit Power Receive Sensitivity -80 dBm (typical) @ 11 Mbps
-70 dBm (typical) @ 54 Mbps
-61 dBm (typical) @ 130 Mbps
-61 dBm (typical) @ 270 Mbps Antenna Gain 1,8 dBi Security Features WPA2/WPA Personal and Enterprise;
OS Requirements Windows XP, Vista, or Vista 64-bit edition with latest updates (for
(to run the Network Magic and Setup Wizard);
Setup CD) Mac OS X 10.4 or higher (for Setup Wizard) Environmental Dimensions Weight Power Certification 202 x 34 x 160 mm (8,0 x 1,3 x 6,3) 362 g (12,8 oz) 12VDC, 1A FCC, CE, Telepermit, K.21, UL, CB, Wi-Fi (802.11b/g), WPA, WPA2, WMM, Wi-Fi Protected Setup 128, 64 bits WEP;
MAC Address Filtering;
SPI Firewall Wireless ADSL2+ Modem Router 8 Appendix B Specifications Wireless ADSL2+ Modem Router 9 Troubleshooting You need to modify the basic settings on the deviceRouter. Run the Setup Wizard on the Setup CD-ROM. You need to modify the advanced settings on the device. Open the web browser (for example, Internet Explorer or Firefox), and enter the devices IP address in the address field (the default IP address is 192.168.1.1). When prompted, complete the User name and Password fields
(the default user name and password is admin). Click the appropriate tab to change the settings If your WEB:
addressed here, www.linksysbycisco.com/support questions refer to are not the website, Appendix A Appendix A:
Troubleshooting Your computer cannot connect to the Internet. Follow the instructions until your computer can connect to the Internet:
Make sure that the Modem Router is powered on. The Power LED should be green and not flashing. If the Power LED is flashing, then power off all of your network devices, including the Modem Router and computers. Then power on each device in the following order:
1. Modem Router 2. Computer Check the LEDs on the devices front panel. Make sure the Power, DSL, and at least one of the numbered Ethernet LEDs are lit. If they are not, then check the cable connections. The computer should be connected to one of the Ethernet ports numbered 1-4 on the device, and the devices DSL port must be connected to the ADSL line. When you double-click the web browser, you are prompted for a user name and password. If you want to get rid of the prompt, follow these instructions. Launch the web browser and perform the following steps
(these steps are specific to Internet Explorer but are similar for other browsers):
3. Select Tools > Internet Options. 4. Click the Connections tab. 5. Select Never dial a connection. 6. Click OK. You are using a static IP address and cannot connect. Refer to Windows Help and change your Internet Protocol
(TCP/IP) Properties to Obtain an IP address automatically. The computer cannot connect wirelessly to the network. Make sure the wireless network name or SSID is the same on both the computer and the device. If you have enabled wireless security, then make sure the same security method and key are used by both the computer and the device. Wireless ADSL2+ Modem Router 10 Appendix C Regulatory Information Appendix C:
Regulatory Information European Union The following information applies if you use the product within the European Union. Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) Compliance Information for 2,4-GHz and 5-GHz Wireless Products Relevant to the EU and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) NOTE: The 5 GHz information does not apply to Wireless-G (802.11g) only products.
[Bulgarian]
1999/5/. esky
[Czech]:
Dansk
[Danish]:
Deutsch
[German]:
Toto zazen je v souladu se zkladnmi poadavky odpovdajcmi ustanovenmi Smrnice 1999/5/EC. ostatnmi a Dette udstyr er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. Dieses Gert entspricht den grundlegenden Anforderungen weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. und den Eesti
[Estonian]:
See seade vastab direktiivi 1999/5/E olulistele nuetele ja teistele asjakohastele stetele. English:
Espaol
[Spanish]:
[Greek]:
Franais
[French]:
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Este equipo cumple con requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE. los 1999/5/EC. Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC. slenska
[Icelandic]:
etta tki er samkvmt grunnkrfum og rum vieigandi kvum Tilskipunar 1999/5/EC. Italiano
[Italian]:
Latviski
[Latvian]:
Questo apparato conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. iekrta atbilst Direktvas 1999/5/
EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi
[Lithuanian]:
is renginys tenkina 1999/5/EB Direktyvos esminius reikalavimus ir kitas ios direktyvos nuostatas. Nederlands
[Dutch]:
Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC. Malti
[Maltese]:
Dan l-apparat huwa konformi mal-tiiet essenzjali u l-provedimenti l-ora rilevanti tad-Direttiva 1999/5/EC. Magyar
[Hungarian]:
a teljesti Ez kszlk kvetelmnyeket s ms irnyelvben meghatrozott rendelkezseket. az alapvet 1999/5/EK vonatkoz Norsk
[Norwegian]:
Dette utstyret er samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF. i Polski
[Polish]:
jest Urzdzenie oglnymi wymaganiami oraz szczeglnymi warunkami okrelonymi Dyrektyw UE: 1999/5/EC. zgodne z Portugus
[Portuguese]:
Este equipamento est em conformidade com os requisitos essenciais e outras provises relevantes da Directiva 1999/5/EC. Romn
[Romanian]
Slovensko
[Slovenian]:
Slovensky
[Slovak]:
Suomi
[Finnish]:
Svenska
[Swedish]:
Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 1999/5/EC. Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC. Toto zariadenie je v zhode so zkladnmi poiadavkami prslunmi nariadeniami direktv: 1999/5/EC. inmi a laite Tm tytt direktiivin 1999/5/EY olennaiset vaatimukset ja on siin asetettujen muiden koskevien mrysten mukainen. laitetta Denna utrustning r i verensstmmelse med de vsentliga kraven och andra relevanta bestmmelser i Direktiv 1999/5/EC. Wireless ADSL2+ Modem Router 11 Appendix C Regulatory Information For all products, the Declaration of Conformity (DofC) is available through one or more of these options:
nessuna limitazione, eccetto per i paesi menzionati di seguito:
A pdf file is included on the products CD. A print copy is included with the product. A pdf file is available on the products webpage. Visit www.linksysbycisco.com/international and select your country or region. Then select your product. If you need any other technical documentation, see the Technical Documents on www.linksysbycisco.com/
international section, as shown later in this appendix. Non-Wireless Equipment (ADSL Modems/Gateways) The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC:
EMC: EN 55 022 and EN 55 024 Safety: EN 60950-1 CE Marking For the Linksys products such as the ADSL modems/
gateways, the following CE mark is added to the equipment. Wireless Equipment (Wireless-N/G/A/B Products) The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC:
Radio: EN 300 328 and/or EN 301 893 as applicable EMC: EN 301 489-1, EN 301 489-17 Safety: EN 60950-1 and either EN 50385 or EN 50371 For the Linksys Wireless-N, -G, -B, and/or -A products, the following CE mark, and class 2 identifier are added to the equipment. National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
CeproduitpeuttreutilisdanstouslespaysdelUE(etdans touslespaysayanttranspossladirective1999/5/CE)sans aucune limitation, except pour les pays mentionns ci-
dessous:
QuestoprodottoutilizzabileintutteipaesiEU(edintutti glialtripaesicheseguonoledirettiveEU1999/5/EC)senza Wireless ADSL2+ Modem Router DasProduktkanninallenEUStaatenohneEinschrnkungen eingesetzt werden (sowie in anderen Staaten die der EU Direktive 1999/5/CE folgen) mit Aunahme der folgenden aufgefhrtenStaaten:
In the majority of the EU and other European countries, the 2,4- and 5-GHz bands have been made available for the use of wireless local area networks (LANs). Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable. The requirements for any country may evolve. Linksys recommends that you check with the local authorities for the latest status of their national regulations for both the 2,4- and 5-GHz wireless LANs. following countries have The restrictions and/or requirements in addition to those given in the table labeled OverviewofRegulatoryRequirementsforWireless LANs:
Denmark In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. IDanmarkmfrekvensbndet5150-5350ogsanvendes udendrs. France For 2,4 GHz, the product should not be used outdoors in the band 2454 - 2483,5 MHz. There are no restrictions when used in other parts of the 2,4 GHz band OR when indoors. Check http://www.arcep.fr/ for more used details. Pour la bande 2,4 GHz, l quipement ne doit pas tre utilis en extrieur dans la bande 2454- 2483,5 MHz. Il ny a aucune restriction pour son utilisation dans dautres parties de la bande des 2,4 GHz ainsi que pour une utilisation en intrieur. Consultez http://www.arcep.fr/
pour de plus amples dtails. Italy This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this 2,4-GHz wireless LAN product is operating within the boundaries of the owners property, its use requires a general authorization. Bands 5150-5350 MHz and 5470-5725 MHz require general authorization if used outdoors. Please check http://www.comunicazioni.it/it/ for more details. Questo prodotto conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato allinterno del proprio fondo, lutilizzo di prodotti Wireless LAN a 12 Appendix C Regulatory Information Third-Party Software or Firmware The use of software or firmware not supported/provided by Linksys may result that the equipment is no longer compliant with the regulatory requirements. Technical Documents on www.linksysbycisco.com/international Follow these steps to access technical documents:
1. Enter http://www.linksysbycisco.com/international in your web browser. 2. Select the country or region in which you live. 3. Click the Products tab. 4. Select the appropriate product category. 5. Select the product sub-category, if necessary. 6. Select the product. Note to US model owner: To comply with US FCC regulation, the country selection function has been completely removed from all US models. The above function is for non-US models only. 7. Select the type of documentation you want from the More Information section. The document will open in PDF format if you have Adobe Acrobat installed on your computer. If you have questions NOTE:
regarding this product or you the compliance of information you need, cannot please contact your local sales office or visit www.linksysbycisco.com/international find the 2,4 GHz richiede una Autorizzazione Generale. Lutilizzo allaperto delle bande di frequenza 5150-5350 MHz e 5470-5725 MHz soggetto ad autorizzazione generale. Consultare per maggiori dettagli. http://www.comunicazioni.it/it/
Latvia The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details. 2,4 GHz frekveu nepiecieama atauja no Elektronisko sakaru direkcijas. Vairk informcijas: http://www.esd.lv. izmantoanai rpus telpm joslas Notes:
1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries. 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the antenna used
(specified in dBi) to the output power available at the connector (specified in dBm). Product Usage Restrictions This product is designed for indoor usage only. Outdoor usage is not recommended, unless otherwise noted. Outdoor usage may even be prohibited (see below). 2,4 GHz Restrictions This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with the equipment. However, some applications may require the antenna(s), if removable, to be separated from the product and installed remotely from the device by using extension cables. For these applications, Linksys offers an R SMA extension cable (AC9SMA) and an R-TNC extension cable (AC9TNC). Both of these cables are 9 meters long and have a cable loss (attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S (with R-SMA connector) and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi and may only be used with either the R-SMA or R-TNC extension cable. Combinations of extension cables and antennas resulting in a radiated power level exceeding 20 dBm (100 mW) EIRP (2,4 GHz band) are illegal. 5 GHz Restrictions Products that operate in any frequency within 5150 to 5350 MHz are restricted to indoor use only, in all European countries except Denmark. Wireless ADSL2+ Modem Router 13 Appendix C Regulatory Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:
English - Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.
(Bulgarian)
2002/96/EC ,
, . etina (Czech) - Informace o ochran ivotnho prosted pro zkaznky v zemch Evropsk unie Evropsk smrnice 2002/96/ES zakazuje, aby zazen oznaen tmto symbolem na produktu anebo na obalu bylo likvidovno s netdnm komunlnm odpadem. Tento symbol udv, e dan produkt mus bt likvidovn oddlen od bnho komunlnho odpadu. Odpovdte za likvidaci tohoto produktu a dalch elektrickch a elektronickch zazen prostednictvm urench sbrnch mst stanovench vldou nebo mstnmi ady. Sprvn likvidace a recyklace pomh pedchzet potencilnm negativnm dopadm na ivotn prosted a lidsk zdrav. Podrobnj informace o likvidaci starho vybaven si laskav vydejte od mstnch ad, podniku zabvajcho se likvidac komunlnch odpad nebo obchodu, kde jste produkt zakoupili. Dansk (Danish) - Miljinformation for kunder i EU EU-direktiv 2002/96/EF krver, at udstyr der brer dette symbol p produktet og/eller emballagen ikke m bortskaffes som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder. Korrekt bortskaffelse og genvinding vil hjlpe med til at undg mulige skader for miljet og menneskers sundhed. Kontakt venligst de lokale myndigheder, renovationstjenesten eller den butik, hvor du har kbt produktet, angende mere detaljeret information om bortskaffelse af dit gamle udstyr. Deutsch (German) - Umweltinformation fr Kunden innerhalb der Europischen Union Die Europische Richtlinie 2002/96/EC verlangt, dass technische Ausrstung, die direkt am Gert und/oder an der Verpackung mit diesem Symbol versehen ist
, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulrem Haushaltmll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gert und andere elektrische und elektronische Gerte ber die dafr zustndigen und von der Regierung oder rtlichen Behrden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemes Entsorgen und Recyceln trgt dazu bei, potentielle negative Folgen fr Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte an die rtlichen Behrden oder stdtischen Entsorgungsdienste oder an den Hndler, bei dem Sie das Produkt erworben haben. Wireless ADSL2+ Modem Router 14 Appendix C Regulatory Information informatsioon Eesti (Estonian) - Keskkonnaalane Euroopa Liidus asuvatele klientidele Euroopa Liidu direktiivi 2002/96/E nuete kohaselt on seadmeid, millel on tootel vi pakendil kesolev smbol
, keelatud krvaldada koos sorteerimata olmejtmetega. See smbol nitab, et toode tuleks krvaldada eraldi tavalistest olmejtmevoogudest. Olete kohustatud krvaldama kesoleva ja ka muud elektri- ja elektroonikaseadmed riigi vi kohalike ametiasutuste poolt ette nhtud kogumispunktide kaudu. Seadmete korrektne krvaldamine ja ringlussevtt aitab vltida vimalikke negatiivseid tagajrgi keskkonnale ning inimeste tervisele. Vanade seadmete krvaldamise kohta tpsema informatsiooni saamiseks vtke palun hendust kohalike ametiasutustega, jtmekitlusfirmaga vi kauplusega, kust te toote ostsite. Espaol (Spanish) - Informacin medioambiental para clientes de la Unin Europea La Directiva 2002/96/CE de la UE exige que los equipos que lleven este smbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El smbolo indica que el producto en cuestin debe separarse de los residuos domsticos convencionales con vistas a su eliminacin. Es responsabilidad suya desechar este y cualesquiera otros aparatos elctricos y electrnicos a travs de los puntos de recogida que ponen a su disposicin el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estar contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener informacin ms detallada sobre la eliminacin segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminacin de residuos de su zona o pregunte en la tienda donde adquiri el producto.
(Greek)
2002/96/EC,
. Franais (French) - Informations environnementales pour les clients de lUnion europenne La directive europenne 2002/96/CE exige que lquipement sur lequel est appos ce symbole sur le produit et/ou son emballage ne soit pas jet avec les autres ordures mnagres. Ce symbole indique que le produit doit tre limin dans un circuit distinct de celui pour les dchets des mnages. Il est de votre responsabilit de jeter ce matriel ainsi que tout autre matriel lectrique ou lectronique par les moyens de collecte indiqus par le gouvernement et les pouvoirs publics des collectivits territoriales. Llimination et le recyclage en bonne et due forme ont pour but de lutter contre limpact nfaste potentiel de ce type de produits sur lenvironnement et la sant publique. Pour plus dinformations sur le mode dlimination de votre ancien quipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des dchets, ou lendroit o vous avez achet le produit. Italiano (Italian) - Informazioni relative allambiente per i clienti residenti nellUnione Europea La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sullimballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. responsabilit del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per lambiente e per la salute dellessere umano. Per ricevere informazioni pi dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Latvieu valoda (Latvian) - Ekoloiska informcija klientiem Eiropas Savienbas jurisdikcij Direktv 2002/96/EK ir prasba, ka aprkojumu, kam pievienota zme uz paa izstrdjuma vai uz t iesaiojuma, nedrkst izmest neirot veid kop ar komunlajiem atkritumiem
(tiem, ko rada vietji iedzvotji un uzmumi). zme nozm to, ka ierce ir jizmet atkritumos t, lai t nenonktu kop ar parastiem mjsaimniecbas atkritumiem. Jsu pienkums ir o un citas elektriskas un elektroniskas ierces izmest atkritumos, izmantojot paus atkritumu savkanas veidus un ldzekus, ko nodroina valsts un pavaldbu iestdes. Ja izmeana atkritumos un prstrde tiek veikta pareizi, tad mazins iespjamais kaitjums dabai un cilvku veselbai. Skkas zias par novecojua aprkojuma izmeanu atkritumos js varat saemt vietj pavaldb, atkritumu savkanas dienest, k ar veikal, kur iegdjties o izstrdjumu. Wireless ADSL2+ Modem Router 15 Appendix C Regulatory Information Lietuvkai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sjungos vartotojams Europos direktyva 2002/96/EC numato, kad rangos, kuri ir kurios pakuot yra paymta iuo simboliu (veskite simbol), negalima alinti kartu su neriuotomis komunalinmis atliekomis. is simbolis rodo, kad gamin reikia alinti atskirai nuo bendro buitini atliek srauto. Js privalote utikrinti, kad i ir kita elektros ar elektronin ranga bt alinama per tam tikras nacionalins ar vietins valdios nustatytas atliek rinkimo sistemas. Tinkamai alinant ir perdirbant atliekas, bus ivengta galimos alos aplinkai ir moni sveikatai. Daugiau informacijos apie js senos rangos alinim gali pateikti vietins valdios institucijos, atliek alinimo tarnybos arba parduotuvs, kuriose sigijote t gamin. Informazzjoni Ambjentali gal Malti (Maltese) -
Klijenti fl-Unjoni Ewropea Id-Direttiva Ewropea 2002/96/KE titlob li t-tagmir li jkun fih fuq il-prodott u/jew fuq l-ippakkjar ma jistax is-simbolu jintrema ma skart muniipali li ma iex isseparat. Is-simbolu jindika li dan il-prodott gandu jintrema separatament minn ma l-iskart domestiku regolari. Hija responsabbilt tiegek li tarmi dan it-tagmir u kull tagmir ieor ta l-elettriku u elettroniku permezz ta failitajiet ta bir appuntati apposta mill-gvern jew mill-awtoritajiet lokali. Ir-rimi bmod korrett u r-riikla jgin jipprevjeni konsegwenzi negattivi potenzjali gall-ambjent u gas-saa tal-bniedem. Gal aktar informazzjoni dettaljata dwar ir-rimi tat-tagmir antik tiegek, jekk jogbok ikkuntattja lill-awtoritajiet lokali tiegek, is-servizzi gar-rimi ta l-iskart, jew il-anut minn fejn xtrajt il-prodott. Magyar (Hungarian) - Krnyezetvdelmi informci az eurpai unis vsrlk szmra A 2002/96/EC szm eurpai unis irnyelv megkvnja, hogy azokat a termkeket, amelyeken, s/vagy amelyek csomagolsn az albbi cmke megjelenik, tilos a tbbi szelektlatlan lakossgi hulladkkal egytt kidobni. A cmke azt jelli, hogy az adott termk kidobsakor a szokvnyos hztartsi hulladkelszlltsi rendszerektl elklntett eljrst kell alkalmazni. Az n felelssge, hogy ezt, s ms elektromos s elektronikus berendezseit a kormnyzati vagy a helyi hatsgok ltal kijellt gyjtredszereken keresztl szmolja fel. A megfelel hulladkfeldolgozs segt a krnyezetre s az emberi egszsgre potencilisan rtalmas negatv hatsok megelzsben. Ha elavult berendezseinek felszmolshoz tovbbi rszletes informcira van szksge, krjk, lpjen kapcsolatba a helyi hatsgokkal, a hulladkfeldolgozsi szolglattal, vagy azzal zlettel, ahol a termket vsrolta. Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool op het product of de verpakking, niet mag worden ingezameld met niet-gescheiden huishoudelijk afval. Dit symbool geeft aan dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de vernietiging van deze en andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen. De juiste vernietiging en recycling van deze apparatuur voorkomt mogelijke negatieve gevolgen voor het milieu en de gezondheid. Voor meer informatie over het vernietigen van uw oude apparatuur neemt u contact op met de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft. Norsk (Norwegian) - Miljinformasjon for kunder i EU EU-direktiv 2002/96/EF krever at utstyr med flgende symbol avbildet p produktet og/eller pakningen, ikke m kastes sammen med usortert avfall. Symbolet indikerer at dette produktet skal hndteres atskilt fra ordinr avfallsinnsamling for husholdningsavfall. Det er ditt ansvar kvitte deg med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunene bestemmer. Korrekt avfallshndtering og gjenvinning vil vre med p forhindre mulige negative konsekvenser for milj og helse. For nrmere informasjon om hndtering av det kasserte utstyret ditt, kan du ta kontakt med kommunen, en innsamlingsstasjon for avfall eller butikken der du kjpte produktet. znajdujcym si na produkcie Polski (Polish) - Informacja dla klientw w Unii Europejskiej o przepisach dotyczcych ochrony rodowiska Dyrektywa Europejska 2002/96/EC wymaga, aby sprzt oznaczony symbolem i/
lub jego opakowaniu nie by wyrzucany razem z innymi niesortowanymi odpadami komunalnymi. Symbol ten wskazuje, e produkt nie powinien by usuwany razem ze zwykymi odpadami z gospodarstw domowych. Na Pastwu spoczywa obowizek wyrzucania tego i innych urzdze elektrycznych oraz elektronicznych w punktach odbioru wyznaczonych przez wadze krajowe lub lokalne. Pozbywanie si sprztu we waciwy sposb jego recykling pomog zapobiec potencjalnie negatywnym konsekwencjom dla rodowiska i zdrowia ludzkiego. W celu uzyskania szczegowych informacji o usuwaniu starego sprztu, prosimy zwrci si do lokalnych wadz, sub oczyszczania miasta lub sklepu, w ktrym produkt zosta nabyty. i Wireless ADSL2+ Modem Router 16 Appendix C Regulatory Information Portugus (Portuguese) - Informao ambiental para clientes da Unio Europeia A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este smbolo no produto e/ou na sua embalagem no seja eliminado junto com os resduos municipais no separados. O smbolo indica que este produto deve ser eliminado separadamente dos resduos domsticos regulares. da sua responsabilidade eliminar este e qualquer outro equipamento elctrico e electrnico atravs das instalaes de recolha designadas pelas autoridades governamentais ou locais. A eliminao e reciclagem correctas ajudaro a prevenir as consequncias negativas para o ambiente e para a sade humana. Para obter informaes mais detalhadas sobre a forma de eliminar o seu equipamento antigo, contacte as autoridades locais, os servios de eliminao de resduos ou o estabelecimento comercial onde adquiriu o produto. Romn (Romanian) - Informaii de mediu pentru clienii din Uniunea European Directiva european 2002/96/CE impune ca echipamentele care prezint acest simbol pe produs i/sau pe ambalajul acestuia s nu fie casate mpreun cu gunoiul menajer municipal. Simbolul indic faptul c acest produs trebuie s fie casat separat de gunoiul menajer obinuit. Este responsabilitatea dvs. s casai acest produs i alte echipamente electrice i electronice prin intermediul unitilor de colectare special desemnate de guvern sau de autoritile locale. Casarea i reciclarea corecte vor ajuta la prevenirea potenialelor consecine negative asupra sntii mediului i a oamenilor. Pentru mai multe informaii detaliate cu privire la casarea acestui echipament vechi, contactai autoritile locale, serviciul de salubrizare sau magazinul de la care ai achiziionat produsul. Slovenina (Slovak) - Informcie o ochrane ivotnho prostredia pre zkaznkov v Eurpskej nii Poda eurpskej smernice 2002/96/ES zariadenie s tmto symbolom na produkte a/alebo jeho balen nesmie by likvidovan spolu s netriedenm komunlnym odpadom. Symbol znamen, e produkt by sa mal likvidova oddelene od benho odpadu z domcnost. Je vaou povinnosou likvidova toto i ostatn elektrick a elektronick zariadenia prostrednctvom pecializovanch zbernch zariaden urench vldou alebo miestnymi orgnmi. Sprvna likvidcia a recyklcia pome zabrni prpadnm negatvnym dopadom na ivotn prostredie a zdravie ud. Ak mte zujem o podrobnejie informcie o likvidcii starho zariadenia, obrte sa, prosm, na miestne orgny, organizcie zaoberajce sa likvidciou odpadov alebo obchod, v ktorom ste si produkt zakpili. informacije za Slovenina (Slovene) - Okoljske stranke v Evropski uniji Evropska direktiva 2002/96/ES prepoveduje odlaganje opreme s tem simbolom na izdelku in/ali na embalai z nesortiranimi komunalnimi odpadki. Ta simbol opozarja, da je treba izdelek zavrei loeno od preostalih gospodinjskih odpadkov. Vaa odgovornost je, da to in preostalo elektrino in elektronsko opremo oddate na posebna zbiralia, ki jih doloijo dravne ustanove ali in recikliranjem boste prepreili morebitne kodljive vplive na okolje in zdravje ljudi. e elite izvedeti ve o odlaganju stare opreme, se obrnite na lokalne oblasti, odlagalie odpadkov ali trgovino, kjer ste izdelek kupili. lokalne oblasti. S pravilnim odlaganjem Suomi (Finnish) - Ymprist koskevia tietoja EU-
alueen asiakkaille EU-direktiivi 2002/96/EY edellytt, ett jos laitteistossa on tm symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa ei saa hvitt lajittelemattoman yhdyskuntajtteen mukana. Symboli merkitsee sit, ett tm tuote on hvitettv erilln tavallisesta kotitalousjtteest. Sinun vastuullasi on hvitt tm elektroniikkatuote ja muut vastaavat elektroniikkatuotteet viemll tuotteet viranomaisten mrmn keryspisteeseen. Laitteiston oikea hvittminen est mahdolliset kielteiset vaikutukset ympristn ja ihmisten terveyteen. Listietoja vanhan laitteiston oikeasta hvitystavasta saa paikallisilta viranomaisilta, jtteenhvityspalvelusta tai siit myymlst, josta ostit tuotteen. tuote tai Svenska (Swedish) - Miljinformation fr kunder i Europeiska unionen Det europeiska direktivet 2002/96/EC krver att utrustning med denna symbol p produkten och/eller frpackningen inte fr kastas med osorterat kommunalt avfall. Symbolen visar att denna produkt br kastas efter att den avskiljts frn vanligt hushllsavfall. Det faller p ditt ansvar att kasta denna och annan elektrisk och elektronisk utrustning p faststllda insamlingsplatser utsedda av regeringen eller lokala myndigheter. Korrekt kassering och tervinning skyddar mot eventuella negativa konsekvenser fr miljn och personhlsa. Fr mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokala myndigheter, avfallshanteringen eller butiken dr du kpte produkten. WEB: For additional information, please visit www.linksysbycisco.com/international Wireless ADSL2+ Modem Router 17 Appendix C Regulatory Information Australia The following information applies if you use the product within Australia. Safety Notice WARNING: To ensure compliance with exposure limits to radiofrequency fields, the antenna of the device should be no closer than 20 cm from the body during use. New Zealand The following information applies if you use the product within New Zealand. Telepermit Statement The cabling between the phone port and the phone shall not exceed 100 metres. PTC200 General Warning The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecoms network services. Wireless Connectivity Security on Cisco-Linksys ADSL2+ Devices Setting up the security of the wireless connection associated with ADSL2+ device is the users responsibility. Telecom will take no responsibility for charges made to users accounts due to poorly organized wireless security allowing unknown users to connect to the Internet via this device. Do not complain to the Telecom Fault Service or Jetstream Helpdesk should this occur. General Warning for Cisco-Linksys ADSL2+
Devices and ADSL2+ Capability This device has been tested and found suitable to connect to the Telecom ADSL2+ capability. This indicates only that Telecom has accepted that this device complies with the spectrum management plan for ADSL2+ on copper cable and with simple voiceband compatibility tests included in PTC273. It does not indicate that this device is fully compatible with all services accessed via the ADSL2+
capability. Contact the supplier of the device when issues occur. Do not call the Telecom Fault Service or the Jetstream Helpdesk. Wireless ADSL2+ Modem Router Cisco-Linksys ADSL2+ Devices on Long Lines ADSL2+ devices may not achieve the type of high speed operation expected when attached to a line that is longer than intended by the ITU-T Rec. G.996.1 ADSL standard i.e. >3 km of 0.4mm cable or a shorter cable length with several tails or multiples. If the device is installed in such conditions and does not give the expected download performance, then do not refer the matter to the Telecom Fault Service or ADSL Helpdesk. United States of America The following information applies if you use the product within the United States of America. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. 18 Appendix C Regulatory Information If you experience trouble with this telephone equipment, Please contact the following address and phone number for information on obtaining service or repairs. The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. COMPANY:
ADDRESS:
TEL NO:
Cisco Consumer Products LLC 121 Theory , Irvine, Ca., 92617, USA 1 800-326-7114 Safety Notices WARNING: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: This equipment will be inoperable when main power fails. WARNING: To ensure compliance with explosure limits to radiofrequency fields, the antenna of the device should be no closer than 20 cm from the body during use. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. FCC Part 68 Statement This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: Q87DL01BX2000. If requested, this number must be provided to the telephone company. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US: Q87DL01BX2000. The digits represented by 01are the REN without a decimal point
(e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in it is facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. Wireless ADSL2+ Modem Router 19 Appendix C Regulatory Information Canada The following information applies if you use the product within Canada. Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including that may cause undesired operation. interference Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE IMPORTANTE: (Pour lutilisation de dispositifs mobiles) Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 01. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. AVIS : Le prsent matriel est conforme aux spcifications techniques dIndustrie Canadaapplicables au matriel Wireless ADSL2+ Modem Router le terminal. Cette conformit est confirme par numrodenregistrement. Le sigle IC, plac devant le numro denregistrement, signifie quelenregistrement sest effectu conformment une dclaration de conformit et indique queles spcifications techniques dIndustrie Canada ont t respectes. Il nimplique pasquIndustrie Canada a approuv le matriel. AVIS : Lindice dquivalence de la sonnerie (IES) du prsent matriel est de 01. LIESassign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent treraccords une interface tlphonique. La terminaison dune interface peut consister en unecombinaison quelconque de dispositifs, la seule condition que la somme dindicesdquivalence de la sonnerie de tous les dispositifs nexcde pas 5. Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. Avis de non-responsabilit concernant les appar-
eils sans fil Les performances maximales pour les rseaux sans fil sont tires des spcifications de la norme IEEE 802.11. Les performances relles peuvent varier, notamment en fonction de la capacit du rseau sans fil, du dbit de la transmission de donnes, de la porte et de la couverture. Les performances dpendent de facteurs, conditions et variables multiples, en particulier de la distance par rapport au point daccs, du volume du trafic rseau, des matriaux utiliss dans le btiment et du type de construction, du systme dexploitation et de la combinaison de produits sans fil utiliss, des interfrences et de toute autre condition dfavorable. 3425-01414 110310-10_20-10C-AI 20 www.linksys.com/support Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. 2011 Cisco and/or its affiliates. All rights reserved.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-05-20 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-05-20
|
||||
1 | Applicant's complete, legal business name |
LINKSYS LLC
|
||||
1 | FCC Registration Number (FRN) |
0008067837
|
||||
1 | Physical Address |
121 Theory Drive
|
||||
1 |
Irvine, California 92617
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
Q87
|
||||
1 | Equipment Product Code |
X2000
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** H******
|
||||
1 | Title |
Regulatory Compliance Manager
|
||||
1 | Telephone Number |
949-2********
|
||||
1 | Fax Number |
949-2********
|
||||
1 |
j******@belkin.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/30/2011 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless ADSL2+ Modem Router | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum combined conducted output power. Device is an 802.11bgn router operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas Hong Kong Limited
|
||||
1 | Name |
S****** T********
|
||||
1 | Telephone Number |
85223********
|
||||
1 |
s******@hk.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2412.00000000 | 2462.00000000 | 0.6180000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC