User manual 802.11ac, 2T2R Wireless LAN USB2.0 Module WN4505L Version 1.2 Author: Kaysa Lee Editor: Kaysa Lee Change History Revision Date Version 1.0 2013/03/04 Version 1.1 2013/12/06 Version 1.2 2014/04/22 Author Kaysa Lee Kaysa Lee Kaysa Lee Change List Preliminary Update Pin definition for WOW function Update Power Consumption
* This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC WN4505L Specification Page 1/8 2014/4/22 LTC Network Access Confidential CONTENT PRODUCT FEATURES .................................................................................................................... 4 PRODUCT SPECIFICATIONS ........................................................................................................ 5 MAIN CHIPSET ....................................................................................................................................... 5 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 5 CONNECTOR SPEC (CONNECTOR 1.25MM 1*5P 50271-0050N-001 SMD()) ................ 7 PIN ASSIGNMENT ............................................................................................................................ 7 BLOCK DIAGRAM ................................................................................................................................. 8 EEPROM INFORMATION .............................................................................................................. 8 ENVIRONMENTAL .......................................................................................................................... 8 OPERATING ............................................................................................................................................ 8 STORAGE ................................................................................................................................................ 8 WN4505L Specification Page 3/8 2014/4/22 LTC Network Access Confidential PRODUCT FEATURES Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac The WN4505L is developed using single-chip designed by Realtek Technology Corporation USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed Enterprise level security supporting: WPA, WPA2, WEP 64/128 Support 2 transmission and 2 receiving, transmission rate can up to 867Mbps
(Physical Rate) in downstream and upstream Full feature software utility for easy configuration and management RoHS compliance Low Halogen compliance WN4505L Specification Page 4/8 2014/4/22 LTC Network Access Confidential PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: Realtek 8812AU-VS-CG FUNCTIONAL SPECIFICATIONS WiFi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface Universal Serial Bus (USB2.0) 802.11b:
11, 5.5, 2, 1 Mbps 802.11g:
Data Rate 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n:
MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz Media Access Control CSMA/CA with ACK Modulation Techniques Network Architecture Operation Channel Frequency Range Transmit Output Power 2x2
(Tolerance: +-1.5dBm) 802.11b:
CCK, DQPSK, DBPSK 802.11g:
64QAM, 16QAM, QPSK, BPSK 802.11n:
BPSK, QPSK, 16QAM, 64QAM Ad-hoc mode (Peer-to-Peer) Infrastructure mode 2.4GHz 11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe 14: (Ch. 1-14) Japan 802.11bg 2.412 ~ 2.462 GHz 802.11b:
16 dBm@1~11Mbps 802.11g:
16 dBm@6~24Mbps 15 dBm@36Mbps~54Mbps 802.11a:
16 dBm@6~24Mbps 15 dBm@36Mbps~54Mbps 802.11n:
2.4G 16dBm@MCS0~3 15dBm@MCS4 14dBm@MCS5 13dBm@MCS6 13dBm@MCS7 16dBm@MCS0~3 15dBm@MCS4 5G WN4505L Specification Page 5/8 2014/4/22 LTC Network Access Confidential EVM Transmit Spectrum flatness/Mask Transmit center frequency tolerance Receive Sensitivity 14dBm@MCS5 13dBm@MCS6 13dBm@MCS7 13dBm@MCS9 11 MHz Offset -30dBr 22 MHz Offset-50dBr 9 MHz Offset0 dBr 11 MHz Offset -20 dBr 20 MHz Offset-28 dBr 30 MHz Offset-40 dBr 802.11g mode (54Mbps) < -25dB HT20 (MCS7) < -28dB HT40(MCS7) < -28dB HT80(MCS9) < -32dB 802.11b at 802.11b at 802.11a/g at 802.11a/g at 802.11a/g at 802.11a/g at 802.11n at 802.11n at 802.11n at 802.11n at 802.11n above 30MHz offset-53dBm/MHz
+/-20ppm(48kHz) frequency stability vs. temperature and aging. 802.11b:
9 MHz offset0 dBr 11 MHz offset-20 dBr 20 MHz offset-28 dBr 30 MHz offset-45 dBr
-94dBm@1Mbps
-82dBm@11Mbps 802.11g:
-90dBm@6Mbps
-68dBm@54Mbps 802.11n:
20MHz
-89dBM@MCS0
-67dBm@MCS7
-65dBm@MCS15 40MHz
-88dBm@MCS0
-64dBm@MCS7
-62dBm@MCS15 Security WPA, WPA2, WPS, WEP 64/128, IEEE 802.11x, IEEE 802.11i Operating Voltage 5V 10% I/O supply voltage OS Supported Microsoft Windows XP/Vista/Win7/Win8/Linux Power Consumption TX Mode:
580mA RX Mode:
165mA Standby Mode:
165mA Antenna Type Two Metallic Antenna WN4505L Specification Page 6/8 2014/4/22 LTC Network Access Confidential CONNECTOR SPEC (CONNECTOR 1.25MM 1*5P 50271-0050N-001 SMD()) PIN ASSIGNMENT PIN. PIN DEFINE 1 2 3 4 5 6 MECHANICAL
+5V D-
D+
GND WOW - Device wake Host function Host inform Device function WN4505L Specification Page 7/8 2014/4/22 LTC Network Access Confidential BLOCK DIAGRAM EEPROM INFORMATION Reg Domain Vendor ID Product ID ENVIRONMENTAL Operating World Wide_13 0x7F 0x0BDA 0x881A Operating Temperature: 0 to 75 C (32 to 167 F) Relevant Humidity: 5-90% (non-condensing) Storage Temperature: -40 to 85 C (-40 to 185 F) Relevant Humidity: 5-95% (non-condensing) WN4505L Specification Page 8/8 2014/4/22 LTC Network Access Confidential This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC rules. These limits are designed to provide r easonable protection against harmful interference in a residential installation. This equ ipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio co mmunications. However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or televi sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measu res: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the recei ver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party r esponsible for compliance could void your authority to operate the equipment. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an unco ntrolled environment. This equipment should be installed and operated with a minimu m distance of 20 centimeters between the radiator and your body. According to FCC 15.407(e), the device is intended to operate in the frequency band o f 5.15GHz to 5.25GHz under all conditions of normal operation. Normal operation of this device is restricted to indoor used only to reduce any potential for harmful interfer ence to cochannel MSS operations. Information to OEM integrator The OEM integrator has to be aware not to provide information to the end user regard ing how to install or remove this RF module in the user manual of the end product. Th e user manual which is provided by OEM integrators for end users must include the fo llowing information in a prominent location. 1. To comply with IC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with IC multitransmitter product transmitter product procedures. 2. Only those antennas with same type and lesser gain filed under this IC ID number c an be used with this device. 3. The regulatory label on the final system must include the statement: Contains IC I D: xxxx . 4. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented two ways authentication between module and the host system. 5. If the end product integrating this module is going to be operated in 5.15 ~5.25GHz frequency range, the warning statement in the user manual of the end product should include the restriction of operating this device in indoor could void the users authorit y to operate the equipment.