PRODUCT SPECIFICATION 802.11a/b/g/n/ac, 2T2R Wireless LAN USB2.0 Module WN4510L Realtek RTL8812AU Version 1.0 User Manual
* This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC Page 1/11 CONTENT FCC WARING STATEMENT .......................................................................................................... 3 IC WARING STATEMENT .............................................................................................................. 4 PRODUCT FEATURES .................................................................................................................... 5 PRODUCT SPECIFICATIONS ........................................................................................................ 6 MAIN CHIPSET ....................................................................................................................................... 6 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 6 CONNECTOR SPEC ......................................................................................................................... 9 PIN ASSIGNMENT .......................................................................................................................... 10 MECHANICAL ................................................................................................................................ 10 BLOCK DIAGRAM ............................................................................................................................... 11 EEPROM INFORMATION ............................................................................................................ 11 ENVIRONMENTAL ........................................................................................................................ 11 OPERATING .......................................................................................................................................... 11 STORAGE .............................................................................................................................................. 11 Page 2/11 FCC WARING STATEMENT FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Page 3/11 End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID:
PPQ-WN4510L Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. This device is operation in 5.15 5.25GHz frequency range, then restricted in indoor use only, Outdoor operations in the 5150~5250MHz is prohibit. This device is slave equipment, the device is not radar detection and not ad-hoc operation in the DFS band. IC WARING STATEMENT Canada, avis d'Industry Canada (IC) Cet appareil numrique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Page 4/11 Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (les antennes se situent moins de 20 cm du corps d'une personne). PRODUCT FEATURES Operate at ISM frequency Band (2.4/5GHz) IEEE Standards Support, 802.11a, 802.11b, 802.11g, 802.11n,and 802.11ac USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed Enterprise level security supporting: WEP 64/128, WPA, WPA2, WAPI Support 2 transmission and 2 receiving, transmission rate can up to 300Mbps
(Physical Rate) in 802.11n; and 866.7Mbps in 802.11ac Wi-Fi Direct supports wireless peer to peer applications RoHS compliance Low Halogen compliance Page 5/11 PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: Realtek 8812AU-VS-CG FUNCTIONAL SPECIFICATIONS WiFi Function Standard IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n; IEEE802.11ac Bus Interface Universal Serial Bus (USB2.0) 802.11a:
54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b:
11, 5.5, 2, 1 Mbps 802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps Data Rate 802.11n:
MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz 802.11ac:
MCS 0 to 8 for HT20MHz MCS 0 to 9 for HT40MHz MCS 0 to 9 for HT80MHz Media Access Control CSMA/CA with ACK Modulation Techniques 802.11a:
54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b:
CCK, DQPSK, DBPSK 802.11g:
64QAM, 16QAM, QPSK, BPSK 802.11n:
64QAM, 16QAM, QPSK, BPSK 802.11ac:
256QAM, 64QAM, 16QAM, QPSK, BPSK Network Architecture Operation Channel Ad-hoc mode (Peer-to-Peer) Infrastructure mode 5GHz 12: United States 19: Europe 8: Japan 2.4GHz 11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe 14: (Ch. 1-14) Japan Frequency Range Transmit Output Power 2x2
(Tolerance: 1.5dBm) 802.11a/ac 5.15~5.85 GHz 802.11bg 2.400 ~ 2.4835 GHz 802.11a:
15 dBm@6Mbps 13 dBm@54Mbps Page 6/11 802.11b:
16 dBm@1Mbps 16 dBm@11Mbps 802.11g:
16 dBm@6Mbps 14 dBm@54Mbps 802.11n(2.4GHz):
20MHz:
16dBm@MCS0 13dBm@MCS7 13dBm@MCS15 40MHz:
16dBm@MCS0 13dBm@MCS7 13dBm@MCS15 802.11n(5GHz):
20MHz:
15dBm@MCS0 13dBm@MCS7 40MHz:
15dBm@MCS0 13dBm@MCS7 802.11ac:
20MHz:
13dBm@MCS8 40MHz:
13dBm@MCS9 80MHz:
13dBm@MCS9 802.11a:
-85 dBm@6Mbps
-70 dBm@54Mbps 802.11b:
-83 dBm@11Mbps 802.11g:
-86 dBm@6Mbps
-70 dBm@54Mbps 802.11n(2.4GHz):
20MHz
-69 dBm@MCS7 40MHz
-66 dBm@MCS7 802.11n(5GHz):
20MHz
-69 dBm@MCS7 40MHz
-66 dBm@MCS7 802.11ac:
20MHz
-63 dBm@MCS8 40MHz
-60 dBm@MCS9 80MHz
-57 dBm@MCS9 Receiver Sensitivity Security WPA, WPA2, WPS, WEP 64/128, IEEE 802.1x, IEEE 802.11i Page 7/11 Operating Voltage 5V 10% I/O supply voltage OS Supported Microsoft Windows Win7/Win8/Win8.1/Linux Power Consumption TX Mode:
TBD RX Mode:
TBD Standby Mode:
TBD RF off:
TBD Antenna Type Metal Antenna Page 8/11 CONNECTOR SPEC Page 9/11 PIN ASSIGNMENT Pin. Pin Define Status 1 2 3 4 5
+5V USB_D-
USB_D+
GND RESET#
YES YES YES YES YES MECHANICAL Page 10/11 BLOCK DIAGRAM EEPROM INFORMATION World Wide_13 0x7F 0x0BDA 0x881A Reg Domain Vendor ID Product ID ENVIRONMENTAL Operating Operating Temperature: 0 to 70 C Relevant Humidity: 5-90% (non-condensing) Storage Temperature: -40 to 85 C (-40 to 185 F) Relevant Humidity: 5-95% (non-condensing) Page 11/11