User MANUAL 802.11b/g/n 2T2R Wireless LAN USB Module Model Name: WN3604R Brand: LITEON Page 1/10 2020/12/2 CONTENT WARNING STATEMENTS .............................................................................................................. 3 PRODUCT FEATURES .................................................................................................................... 6 PRODUCT SPECIFICATIONS ........................................................................................................ 6 MAIN CHIPSET ....................................................................................................................................... 6 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 6 RECOMMENED OPEATION CONDITIONS................................................................................ 8 PIN DEFINIITON .............................................................................................................................. 8 MECHANICAL .................................................................................................................................. 9 MAC LABEL ...................................................................................................................................... 9 ENVIRONMENTAL ........................................................................................................................ 10 OPERATING .......................................................................................................................................... 10 STORAGE .............................................................................................................................................. 10 Page 2/10 2020/12/2 WARNING STATEMENTS FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment
- Connect the equipment into an outlet on a circuit different from that to which the receiver is measures:
and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with FCC multi transmitter product procedures. Referring to the multi transmitter policy, multiple transmitter(s) and module(s) can be operated simultaneously without C2PC. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. Page 3/10 2020/12/2 20 cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains FCC ID:
PPQ-WN3604R". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. OEM Integrator Checklist The party below will implement the LITE-ON Module in host systems in accordance with the instructions specified in this document and the documents referenced herein. 1.The OEM integrator will ensure the Module is integrated in a host systems using only the approved antenna model(s) described in this document. 2.The OEM integrator will ensure the antenna placement inside the host system willmaintain the required spacing to end user for RF Exposure compliance, as specified in this document. 3.If other radios are integrated inside the host with the LITE-ON Module, the OEM integrator will contact its test lab, TCB or LITE-ON to determine if additional FCC compliance evaluation is required to meet FCC collocation rules. 4.The OEM integrator will ensure end user documentation will contain the specified regulatory wording and ensure the host system and the Module itself are labeled as specified in this Page 4/10 2020/12/2 document. integrator IC statement:
5. The OEM integrator will ensure the Module is programmed in the factory with compliant transmit power not exceeding the levels specified in this document. LITE-ON requests that the OEM integrator acknowledge its receipt of this document and the above instructions. You may contact LITE-ON with any questions concerning this document or the responsibilities of the OEM This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference. operation of the device.
(2)This device must accept any interference, including interference that may cause undesired Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1.Lappareil ne doit pas produire de brouillage;
2.Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Dclaration dexposition la radiation : Cet quipement respecte les limites dexposition aux rayonnements IC dfinies pour un environnement non contrl. Cet quipement doit tre install et mis en marche une distance minimale de 20 cm qui spare llment rayonnant de votre corps. Lmetteur ne doit ni tre utilis avec une autre antenne ou un autre metteur ni se trouver leur proximit. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 25 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 4491A-WN3604R. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 25cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 4491A-WN3604R". Page 5/10 2020/12/2 PRODUCT FEATURES Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11b, 802.11g and 802.11n Support USB 2.0 host interface Enterprise level security supporting: WPA, WPA2, WPS2.0, WAPI Two-stream IEEE 802.11n support for 20MHz and 40MHz bandwidth channels provides PHY layer rates up to 300Mbps Integrated LNA, PA and T/R switch Support Wi-Fi Direct RoHS compliance Low Halogen compliance PRODUCT SPECIFICATIONS MAC/ Baseband/ RF: MediaTek MT7603U FUNCTIONAL SPECIFICATIONS MAIN CHIPSET WiFi Function Standard Bus Interface IEEE802.11b; IEEE 802.11g; IEEE 802.11n USB2.0 802.11b:
802.11g:
802.11n:
802.11b:
802.11g:
802.11n:
Data Rate 54, 48, 36, 24, 18, 12, 9, 6 Mbps 11, 5.5, 2, 1 Mbps MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz Media Access Control CSMA/CA with ACK Modulation Techniques Network Architecture Operation Channel CCK, DQPSK, DBPSK 64QAM, 16QAM, QPSK, BPSK 64QAM, 16QAM, QPSK, BPSK Ad-hoc mode (Peer-to-Peer) Infrastructure mode 2.4GHz 11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe Page 6/10 2020/12/2 Frequency Range Transmit Output Power 2x2 MAX: 16.5dBm
(Tolerance: +-1.5dBm) Receive Sensitivity 802.11bg 802.11b:
802.11g:
802.11n:
14: (Ch. 1-14) Japan 2.400 ~ 2.4835 GHz 15dBm@1-11Mbps 15dBm@6-54Mbps 20MHz 13dBm@MCS0-7 40MHz 13dBm@MCS0-7 802.11b:
802.11g:
-88dBm@1Mbps
-82dBm@11Mbps
-86dBm@6Mbps
-71dBm@54Mbps 802.11n:
20MHz 40MHz
-86dBm@MCS0
-68dBm@MCS7
-83dBm@MCS0
-65dBm@MCS7 Security WPA, WPA2, WPS, WEP 64/128, IEEE 802.11x, IEEE 802.11i Operating Voltage 3.3V 10% I/O supply voltage Power Consumption
(Average) Antenna Type 2x U.FL connector Page 7/10 2020/12/2 RECOMMENED OPEATION CONDITIONS PIN DEFINIITON Page 8/10 2020/12/2 MECHANICAL MAC Label Page 9/10 2020/12/2 ENVIRONMENTAL Operating Storage Operating Temperature: 0 to 70 C Relevant Humidity: 5-90% (non-condensing) Temperature: -20 to 70 C Relevant Humidity: 5-95% (non-condensing) Page 10/10 2020/12/2