User MANUAL 802.11b/g/n 2Tx2R + BT5.0 USB WLAN Module Model Name: WCBN4606L Brand: LITE-ON Page 1/15 CONTENT PRODUCT FEATURES ....................................................................................................................7 BT FEATURE:.........................................................................................................................................7 WI-FI FEATURE:.....................................................................................................................................7 PRODUCT SPECIFICATIONS........................................................................................................8 MAIN CHIPSET .......................................................................................................................................8 FUNCTIONAL SPECIFICATIONS ...............................................................................................................8 RECOMMENDED OPERATION CONDITIONS........................................................................11 DC CHARACTERISTICS...............................................................................................................11 RESET TIMING SPEC....................................................................................................................11 PIN ASSIGMENT.............................................................................................................................12 USB CONNECTOR SPEC...............................................................................................................12 MECHANICAL ................................................................................................................................13 I-PEX CONNECTOR SPEC............................................................................................................14 MODULE PHOTO ...........................................................................................................................15 EEPROM INFORMATION ............................................................................................................15 WI-FI/BT .............................................................................................................................................15 ENVIRONMENTAL ........................................................................................................................15 OPERATING ..........................................................................................................................................15 STORAGE..............................................................................................................................................15 Page 2/15 Page 3/15 FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with FCC multi transmitter product procedures. Referring to the multi transmitter policy, multiple transmitter(s) and module(s) can be operated simultaneously without C2PC. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. Page 4/15 20 cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains FCC ID:
PPQ-WCBN4606L ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. OEM Integrator Checklist The party below will implement the LITE-ON Module in host systems in accordance with the instructions specified in this document and the documents referenced herein. 1.The OEM integrator will ensure the Module is integrated in a host systems using only the approved antenna model(s) described in this document. 2.The OEM integrator will ensure the antenna placement inside the host system willmaintain the required spacing to end user for RF Exposure compliance, as specified in this document. 3.If other radios are integrated inside the host with the LITE-ON Module, the OEM integrator will contact its test lab, TCB or LITE-ON to determine if additional FCC compliance evaluation is required to meet FCC collocation rules. 4.The OEM integrator will ensure end user documentation will contain the specified regulatory wording and ensure the host system and the Module itself are labeled as specified in this document. Page 5/15 5. The OEM integrator will ensure the Module is programmed in the factory with compliant transmit power not exceeding the levels specified in this document. LITE-ON requests that the OEM integrator acknowledge its receipt of this document and the above instructions. You may contact LITE-ON with any questions concerning this document or the responsibilities of the OEM integrator Page 6/15 PRODUCT FEATURES BT FEATURE:
Bluetooth V5.0 system Backwards compatible with BT version of 1.1, 1.2, 2.0, 2.1, 3.0+HS and 4.0LE Bluetooth Class I transmission power Support all packet types in basic rate and enhance data rate Support Secure Simple Pairing Support multiple low energy states Fast AGC control to improve receiving dynamic range Support Wake On Bluetooth WI-FI FEATURE:
Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11b, 802.11g, 802.11n Support for both 20 MHz, 40MHz channel width in 2.4GHz band Enterprise level security supporting: WAPI, WPA, WPA2 Support 2 transmission and 2 receiving, transmission rate can up to 300Mbps
(Physical Rate) in downstream and upstream QoS support of WFA WMM, WMMPS Wi-Fi Direct support wireless peer to peer application Channel management and co-existene Support Wake On WLAN via Magic packets and wake-up frame RTL8725A is a single chip integrated IEEE 802.11 b/g/n and Bluetooth 5.0 with a single USB interface Enhanced BT/WI-FI coexistence control to improve transmission quality in different profiles Fully compliance with USB v2.0 specification RoHS compliance Low Halogen compliance Page 7/15 PRODUCT SPECIFICATIONS MAIN CHIPSET Realtek RTL8725A FUNCTIONAL SPECIFICATIONS BT Function Standard Bus Interface Data Rate Bluetooth V5.0LE USB2.0 1 Mbps, 2Mbps and Up to 3Mbps Modulation Scheme GFSK, /4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power
+4 Output Power +10dBm; Class I Device Receiver Sensitivity
< 0.1% BER at -88dBm Wi-Fi Function Standard Bus Interface Data Rate Media Access Control Modulation Technique Network Architecture Operation Channel Frequency Range EVM IEEE802.11b; IEEE 802.11g; IEEE 802.11n. USB2.0 802.11b:
802.11g:
802.11n:
11, 5.5, 2, 1 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz CSMA/CA with ACK 802.11b:
CCK, DQPSK, DBPSK 802.11g:
802.11n:
64QAM, 16QAM, QPSK, BPSK 64QAM, 16QAM, QPSK, BPSK Ad-hoc mode (Peer-to-Peer) Infrastructure mode 2.4GHz 11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe 14: (Ch. 1-14) Japan 802.11bg 2.400 ~ 2.4835 GHz CCK < 35%
OFDM < -25dB MCS0(HT20/40MHz) < -5dB Page 8/15 Frequency Offset MCS7(HT20/40MHz) < -28dB MCS0(VHT20/40/80MHz) < -5dB MCS7(VHT 20/40/80MHz) < -27dB 2.4GHz
-20ppm < Center Frequency < +20ppm Transmit Output Power - single chain @ant;
Tolerance: 1.5dBm@2.4GHz 802.11b Tgtpwr
(dBm) 802.11g Tgtpwr
(dBm) 802.11n HT20 Tgtpwr
(dBm) 802.11n HT40 Tgtpwr
(dBm) 1Mbps 17 2Mbps 17 6~24Mbps 17 36Mbps 16 5.5Mbps 17 48Mbps 16 11Mbps 17 54Mbps 16 MCS0 16 MCS5 14 MCS0 16 MCS5 14 MCS1 16 MCS6 14 MCS1 16 MCS6 14 MCS2 16 MCS7 14 MCS2 16 MCS7 14 MCS3 15 MCS8 MCS3 15 MCS8 MCS4 15 MCS9 MCS4 15 MCS9 Receiver Sensitivity Rate Condition Frequency Band 2.4G Security 11b-1M 11b-11M 11g-6M 11g-54M 11n-HT20MCS0 11n-HT20MCS7 11n-HT40MCS0 11n-HT40MCS7 PER < 8%
PER < 8%
PER < 10%
PER < 10%
PER < 10%
PER < 10%
PER < 10%
PER < 10%
Typical (1SS)
(dBm)
-94
-86
-90
-71
-87
-70
-84
-67 WPS, WPA, WPA2, WEP 64bit & 128bit, IEEE 802.1X, IEEE 802.11i Common Function Operating Voltage 5V 10% I/O supply voltage Page 9/15 Mode Average Peak 829mA 796mA 442mA 185mA 31mA TX RX Unassociated Idle Standby for Wake up mode 2x Metal Antennas for WiF; 1x U.FL connectors for BT 37mA Power Consumption Antenna Type Page 10/15 RECOMMENDED OPERATION CONDITIONS Symbol
+5VCC Rating 5V Supply Voltage Min 4.5 Typ 5 Max 5.5 VDD33_USB VA33X VR33_SYN VR33_RTX_S0 VR33_RTX_S1 BT_BD33PA VD33_SPS VA10_AFE VA10_SYN VR10_RTX_S0 VR10_RTX_S1 VD10D VA10_USB VDD12BT BT_VD12RTXBB BT_BD12RTXFE BT_VD12SYN 3.3V Supply Voltage 3.0 3.3 3.6 1.05V Core Supply Voltage 1.15 1.25 1.37 1.2V Supply Voltage 1.08 1.2 1.32 Units V V V V DC CHARACTERISTICS Symbol Parameter VIL VIH VOL VOH Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage RESET TIMING SPEC Min
2.0 0 2.97 Typ 0 3.3
Max 0.9 3.63 0.33 3.3 Units V V V Symbol Ton TPOR Min 0.2
Typ 1.5 2 Max 5 10 Units ms ms Noted: Reset time , Page 11/15 PIN ASSIGMENT Pin. 1 2 3 4 5 6 7 8 9 10 Pin Define
+5V
+5V USB_D-
USB_D+
GND RESET#
WoWLAN#
GND WoBT GND Description 5V source 5V source USB Data-
USB Data+
Ground System reset RTL8192FC, low active Wake up system via wifi, low active Ground Wake up system via BT, high active Ground Status YES YES YES YES YES YES YES YES YES YES USB CONNECTOR SPEC Manufacture P/N: S1315-10RVB-SB3-KH Thickness of gold flash printed: 1u Page 12/15 MECHANICAL Weight: 3.6g Page 13/15 I-PEX CONNECTOR SPEC Page 14/15 MODULE PHOTO Front Side Bottom Side EEPROM INFORMATION WI-FI/BT World Wide 2.4G Read from registry; Control by driver 0x7F 0x0BDA 0xA725 Reg Domain Vendor ID Device ID ENVIRONMENTAL OPERATING Ambient Operating Temperature: 0 to 70 C (32 to 158 F) Ambient Relative Humidity: 5-90% (non-condensing) STORAGE Ambient Temperature: -40 to 80 C (-40 to 176 F) Ambient Relative Humidity: 5-95% (non-condensing Page 15/15