ENGLISH PRECAUTIONS
ENGLISH TABLE OF CONTENTS Introduction Format Compatibility.3 Recording Modes..3 System Configuration System Requirements...4 Software.4 Discs4 Installation Guide Installing CD Rewriter Drive5 Rear Panel.5 Set Master or Slave Jumper6 Connect to Primary/Secondary IDE Port...7 CD-RW Drive Front Panel...8 Troubleshooting Read Problems...9 Write Problems.11
ENGLISH INTRODUCTION
Format Compatibility
Recording Modes
SYSTEM CONFIGURATION System Requirements
ENGLISH
NOTE:
Software
Discs
ENGLISH INSTALLATION GUIDE Installing CD Rewriter Drive
7.
Rear Panel ENGLISH
Set Master or Slave Jumper
NOTE:Do not use two jumpers to set MA and SL simultaneously.
ENGLISH Connect to Primary/Secondary IDE Port
CD-RW
Note
, CD-RW DRIVE FRONT PANEL ENGLISH
0
Note: Turn off the power before doing this manual ejection.
ENGLISH TROUBLESHOOTING
Read Problems Symptom
Possible Causes
Solutions
) ENGLISH Symptom
Possible Causes
Solutions
ENGLISH Write Problems Symptom
Possible Causes
Solutions
ENGLISH Symptom Possible Causes
Solutions
Appendix A Specification Interface ATAPI / E-IDE Disc diameter 8cm/12cm Data transfer rate Read (CD-ROM) Maxx. 52X (7800KB/sec, CAV) Write (CD-R) 52X (7800KB/sec, CLV) Rewrite (CD-RW) 32X (4800KB/sec, CLV) Data buffer 2MB Applicable formats D-DA, CD-ROM, CD-Extra, CD-ROM XA, Photo CD, CD-I, CD-R, CD-RW Front panel/ Side Busy/write/rewrite LED, Lid button, Rotary volume panel control, Earphone jack, Eject key CD load Motorized loading system Installation condition Horizontally Random access time 80ms (typical) Error rate Hard Error 10-12bits or less Soft Error 10-9bits or less Sound level Sound output level 0.5V0.2Vrms S/N: 70dB Environmental Temperature operating: 5C to 50C storage: -40C to 60C Humidity operating: 15-80% R.H. (Non-condensation) Dimensions W x H x D 145.8 x 41.3 x 170 mm Weight 1Kg (typical) Power specification DC +12V 5%, DC +5 5%
M.T.B.F. 70000 POH, at room temperature 25% duty cycle condition ENGLISH