all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
(CX870-3LB) UserMan 20121218 | Users Manual | 1.41 MiB | ||||
1 2 |
|
(CX870-3LB) UserMan 20130115 | Users Manual | 1.41 MiB | January 15 2013 | |||
1 2 |
|
(CX870-3LB) Inpho | Internal Photos | 777.96 KiB | January 15 2013 | |||
1 2 |
|
(CX870-3LB) Expho | External Photos | 157.99 KiB | January 15 2013 | |||
1 2 |
|
(CX870-3LB) LabelLoc | ID Label/Location Info | 97.41 KiB | ||||
1 2 |
|
(CX870-3LB) Labelsmpl | ID Label/Location Info | 56.55 KiB | ||||
1 2 |
|
(CX870-3LB) ATTESTATION | Cover Letter(s) | 10.27 KiB | January 15 2013 | |||
1 2 |
|
(CX870-3LB) Class II Change 20130115 | Cover Letter(s) | 10.83 KiB | January 15 2013 | |||
1 2 |
|
(CX870-3LB) Confidentiality | Cover Letter(s) | 82.51 KiB | January 15 2013 | |||
1 2 |
|
(CX870-3LB) Declaration of authorization | Cover Letter(s) | 65.45 KiB | January 15 2013 | |||
1 2 | RF Exposure Info | January 15 2013 | ||||||
1 2 | Test Report | January 15 2013 | ||||||
1 2 | Test Setup Photos | January 15 2013 | ||||||
1 2 | Confidential (CX870-3LB) BlkDia | Block Diagram | January 15 2013 | confidential | ||||
1 2 | Confidential (CX870-3LB) OPDes | Operational Description | January 15 2013 | confidential | ||||
1 2 | Confidential (CX870-3LB) Schem | Schematics | January 15 2013 | confidential | ||||
1 2 | Cover Letter(s) | December 19 2012 / December 24 2012 | ||||||
1 2 |
|
(CX870-3LB) FCC Modular Approval Request- 20121221v2 | Cover Letter(s) | 654.05 KiB | December 24 2012 | |||
1 2 | Test Report | December 19 2012 / December 24 2012 | ||||||
1 2 | Test Report | December 24 2012 | ||||||
1 2 | Test Setup Photos |
1 2 | (CX870-3LB) UserMan 20121218 | Users Manual | 1.41 MiB |
JukeBlox Networked Media Module CX Series Datasheet Integrated Ethernet + USB 2.0 Complete audio networking system on a small module WiFi-certified 802.11b/g Built-in strip antenna Optional 2X Diversity Antenna Glueless audio, video and control ports FCC certified Ideal for enabling network and USB audio playback for iPod docks, audio systems, AV Receivers, active speaker systems, internet radios, network playback adaptors SMSC CX Module Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Copyright 2012 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation (SMSC). Product names and company names are the trademarks of their respective holders. The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SMSC CX Module 2 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Table of Contents 1 INTRODUCTION............................................................................................................... 4 2 BLOCK DIAGRAM ............................................................................................................. 4 3 BOARD PICTURES............................................................................................................ 5 3.1 TOP VIEW OF CX MODULE................................................................................................... 5 3.2 BOTTOM VIEW OF CX MODULE.............................................................................................. 6 3.2.1 CX Module Bottom View w/64-pin Low Density Connector ........................................... 6 3.2.2 CX Module Bottom View w/120-pin Media Connector .................................................. 6 3.3 PRODUCTION MODULE WITH TOP AND RF SHIELDS IN PLACE TOP VIEW ............................................. 7 3.4 PRODUCTION MODULE WITH 64-PIN CONNECTOR OPTION SIDE VIEW .............................................. 7 3.5 EXAMPLE PRODUCTION MODULE SHOWING SOLDERED RF SHIELD ..................................................... 8 3.6 PRODUCTION MODULE WITH BOTTOM SHIELD (PART NUMBERS WITH A B AFTER THE CONFIGURATION LETTER) 9 3.6.1 Including J3 Low Density 64-pin connector Bottom View........................................... 9 Including J2 High Density 120-pin connector Bottom View ........................................ 9 3.6.2 4 ORDERING GUIDE ......................................................................................................... 10 4.1 PART NUMBER SYNTAX ..................................................................................................... 10 5 ELECTRICAL SPECIFICATIONS....................................................................................... 11 5.1 ABSOLUTE MAXIMUM RATINGS ............................................................................................ 12 5.2 OPERATING CONDITIONS................................................................................................... 12 5.3 WIFI SPECIFICATION (CX870 ONLY).................................................................................... 13 6 REGULATORY COMPLIANCE AND QUALITY .................................................................... 14 6.0.1 Antenna Considerations ........................................................................................... 15 6.0.2 CX Power Settings Used For Modular Approval ............................................................ 16 6.1 ROHS ........................................................................................................................ 16 6.2 ENVIRONMENTAL TEST...................................................................................................... 16 6.3 ESD AND TRANSIENT TEST (APPLIES TO LAN AND USB EXTERNAL CONNECTIONS ONLY)......................... 16 6.4 MAGNETIC FIELD TEST ..................................................................................................... 16 6.5 MTBF ........................................................................................................................ 16 6.6 MECHANICAL SPECIFICATIONS............................................................................................. 16 6.7 MODULE QUALITY ........................................................................................................... 16 7 BOARD DIMENSIONS AND WEIGHT ............................................................................... 17 7.1 TOP & BOTTOM VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD............................................... 17 7.1.1 Top & Bottom View of CX Module with Bottom Shield................................................ 17 7.2 SIDE VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD ........................................................... 18 7.2.1 Side View of CX Module with Bottom Shield except CX870-3JB .................................. 18 7.2.2 Side View of CX870 Module with Bottom Shield part number CX870-3JB only .............. 19 7.3 3D VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD............................................................. 19 7.4 MODULE WEIGHT ........................................................................................................... 20 8 CONNECTORS AND CONNECTIONS ................................................................................ 20 8.1 WLAN UFL ANTENNA CONNECTOR (OPTIONAL)........................................................................ 20 8.2 MODULE CONNECTORS ..................................................................................................... 20 8.2.1 Pin Descriptions ................................................................................................... 21 8.2.2 Connector PIN Assignments................................................................................... 26 8.2.3 GPIO Assignments................................................................................................ 28 9 APPLICATION GUIDELINES ........................................................................................... 28 9.1 POWER SUPPLY SEQUENCING AND RESET TIMING ....................................................................... 28 9.1.1 Power up, Reset and Power Down Timing ................................................................ 29 9.2 RF CONSIDERATIONS ...................................................................................................... 29 10 REVISION CONTROL .................................................................................................... 30 11 APPENDIX 1: CERTIFICATION NOTICES ...................................................................... 39 SMSC CX Module 3 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 1 Introduction The CX-series module is a single-board networked media player module, based on SMSCs DM870A and DM875 media processors, and enables fast product developments with Ethernet, USB and optional WiFi connectivity. The module connects to standard legacy components in various audio, video/LCD and control formats. 2 Block Diagram JukeBlox Networked Media Module CX Series 3.3V 1.2V 1.9V Reset In Ethernet Transceiver RJ-45
+
Transformer USB Type-A Display SD-Card 3x6bit RGB 4/8bit MMC Apple Co-
processor CCIR-656 A/D, D/A S/PDIF Video Out Audio I/O Host Controller/
LCD setup SPI Ctrl. GPIO I2C PWM DAC UART JTAG DM870A or DM875 RST RMII USB LCD SSM I2C DAC AV Ports UART JTAG SPI GPIO Flash Mem. Bus NAND-Flash 256 Mbit SDRAM NOR-Flash 802.11 2.4 GHz RF transceiver RF Amp. ANT switch Ext. Antenna PCB Antenna Ext. Antenna PCB Antenna 24.000 MHz Note: Choice of antenna is a build option, see Ordering Guide. SMSC CX Module 4 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 3 Board Pictures Please note that all production modules include the RF and top shield. The below top view has the shields temporarily removed to show the components. Also, please note that the 64-pin connector mounted on the module is the male gender. 3.1 Top View of CX Module 802.11b/g front-end External Antenna SMSC processor PCB antenna Ethernet PHY Connectors PCB antenna SDRAM SMSC CX Module 5 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 3.2 Bottom View of CX Module 3.2.1 CX Module Bottom View w/64-pin Low Density Connector LCD connector Low density connector 3.2.2 CX Module Bottom View w/120-pin Media Connector LCD connector FLASH FLASH Media connector SMSC CX Module 6 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 3.3 Production Module with Top and RF shields in place Top View 3.4 Production Module with 64-pin Connector Option Side View SMSC CX Module 7 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 3.5 Example Production Module Showing Soldered RF Shield SMSC CX Module 8 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 3.6 Production Module with Bottom Shield (Part Numbers with a B after the configuration letter) 3.6.1 Including J3 Low Density 64-pin connector Bottom View 3.6.2 View Including J2 High Density 120-pin connector Bottom SMSC CX Module 9 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 4 Ordering Guide Part Number Status SMSC ICs CX870-3A CX870-3B CX870-3D CX870-3DS CX870-3F CX870-3G CX870-3H CX870-3I CX870-3J CX870-3K CX870-3BB CX870-3HB CX870-3IB CX870-3JB CX870-3KB CX780-3LB CX870-3MB CX875-3PB CO O CO CO O O O O O CO SA SA SA SA CA CA CA SA DM870A+T6201 DM870A+T6201 DM870A+T6201
% DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM875+T6201 Internal PCB Diversity Antennas Ext. Diversity Antennas (UFL Conn.)+
Ethernet USB Host Low density 64-pin Conn. Hi density 120-pin Conn. Hi density LCD Conn. 32MB SDRAM 16MB SDRAM 8MB SDRAM 1Gb NAND 8MB NOR Top Module Shield Bottom Module Shield One Ant. X X X X X X Two Ant.
(X)*
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: Please note that the Apple Authentication Coprocessor will not be provided on the CX module. The Apple Authentication Coprocessor should be provided on the product motherboard, connected to the SDA, SCL signals from the CX module. Note: Shaded rows indicate Custom or Obsolete configuration - NOT TO BE USED FOR NEW/STANDARD MP DESIGNS. Status code: C - Custom | S - Standard | O - Obsolete | A - Available
* Connector on board, but requires board modification to enable the connector.
+ The position of the X in the One Ant. column indicates that there is one external antenna connector provided. The position of the X in the Two Ant. column indicates that there are two external antenna connectors provided. Do not use a module which has two external antenna connectors with only one external antenna connected. Leaving one antenna socket open will degrade WiFi performance. SMSC recommends always using modules with two external antennas for best performance.
% The CX870-3DS is the same as CX870-3D, except that the RF shield is soldered in place. 4.1 Part Number Syntax SMSC CX Module 10 SMSC CONFIDENTIAL Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 5 Electrical Specifications Parameter State Model Voltage Power Supply Input Voltage Logic Input high voltage Logic Input low voltage Logic Input threshold voltage Schmitt-trigger input low to high threshold voltage Schmitt-trigger input high to low threshold voltage Logic Output high voltage Logic Output low voltage Logic Low-level output current
(VOL=0.4V) Logic High-level output current
(VOH=2.4V) Reset State Current Consumption Operating in idle state CX870 Playback over WiFi high mips
& rate condition 3.3 1.2 1.9 3.3 1.2 1.9 3.3 1.2 1.9 VIN Symbol min. 3.0 1.08 1.8 1.7
-0.3 1.29 VIH VIL VIT typ. max. Units 3.3 V 1.2 V 1.9 V V V V 3.6 1.32 2.0 5.5 0.7 1.5 1.39 VIT+
VIT-
VOH VOL IOL IOH I3.3 I1.2 I1.9 I3.3 I1.2 I1.9 I3.3 I1.2 I1.9 1.58 1.65 1.71 0.95 1.01 1.06 2.4 0.4 V V V V
-9.6
-15.6
-19.3 mA 11.1 22.5 35.3 mA 60 32 18 185 337 257 240 347 258 78 42 23 241 438 334 312 451 335 mA mA mA mA mA mA mA mA mA Note: The maximum current values are 30% larger than the typical values. The maximum values are intended to be used for power supply sizing calculations. SMSC CX Module 11 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 5.1 Absolute Maximum Ratings Parameter Component Min Max Units 3.3V Supply Voltage 1.2V Supply Voltage 1.9V Supply Voltage Main Logic Input Voltage Logic Output Voltage
-0.5
-0.5
-0.5
-0.5
-0.5 4.6 1.8 2.2 6 4.6 V V V V V 5.2 Operating Conditions Parameter Operating Temperature Operating Humidity Storage Temperature Storage Humidity Storage Temperature Cycle Test 24 hrs Min 0 10
-10 10
-10 Max
+70 90 (non condensing)
+75 95 (non condensing)
+75 Units C
%RH C
%RH C SMSC CX Module 12 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 5.3 WiFi Specification (CX870 only) Feature WLAN Standards Frequency Band Modulation Transmission Speed Tx Power Power-on Ramp RF Carrier Suppression TX EVM Rx Sensitivity
(incl. CE2 Mother board) Description IEEE 802.11b IEEE 802.11g 2.412 2.472 GHz (2.4GHz ISM Band, 13 Channels) Channel 1 - Channel 13 North America FCC, Japan Telec, Europe ETSI 802.11b mode (DS-SS: IEEE 802.11b) 802.11g mode (OFDM: IEEE 802.11g) 802.11b mode 11Mbps, 5.5Mbps, 2Mbps, 1Mbps 802.11g mode 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps 802.11b mode: 16.5dBm, +/-1dB 802.11g mode: 15.0dBm, +/-1dB Using nominal production settings as follows:
Channel RF11 Rate: 11B ='3' (11Mbps), 11G = '8' (54Mbps) MIB: 11B=9, 11G=1 (Reference for Tx Power Tuning) Room temperature The above TX Power specifications will apply to modules shipped from Liteon after 9 April 2012.
< 2us
< 15dBc 802.11b mode: <-22dB 802.11g mode: <-25dB 802.11b mode:
<=-82dBm @ 1Mbps, <=81dBm @ 2Mbps, <=-81dBm @ 5.5Mbps,
<=-78dBm @ 11Mbps 802.11g mode:
<=-82dBm @ 9Mbps, <=-81dBm @ 18Mbps, <=-75dBm @ 36Mbps,
<=-70dBm @ 54Mbps Throughput Rate
(measured for each module) See factory test specification Note: About Tx Power, different (higher/lower) RF output power settings may be used for specific regions, antennas and/or enclosures, in which case re-certification may be required. SMSC CX Module 13 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 6 Regulatory Compliance and Quality Description Electromagnetic Compatibility
(Prescan) Country USA Europe Radio Regulations (CX870 only) USA Japan Canada Europe New Zealand/Australia China Korea Compliance FCC CFR47 Part15B EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 61000-4-11 FCC Part 15C Telec IC RSS-210 CE AZ/NZS:4268 SRRC KCC Module Versions Passed B, D, F, H, I, J B B, D, F, H, I, J B SMSC does not certify all module variants for all countries. Please see above table for those module versions for which certain certifications have already been done. Please contact your SMSC sales office for the latest information about which modules are certified for which countries, and arranging for additional certification for your chosen module if needed. Any additional certifications will need to be paid for by the customer. Product manufacturers are responsible for the end product certification. SMSC can help manufacturers to prepare for the WiFi Alliance tests by providing an example test plan and the required commands to enable special test modes. Please contact your SMSC sales office about WiFi Alliance logo certification assistance. The CX module has received Limited Module Approval (LMA) from FCC. This is because the CX module does not have a built-in +3.3V regulator circuit. SMSC recommends that customers follow the +3.3V supply voltage requirements given in this data sheet, and follow the +3.3V power supply design given in CX Module Power Supply_V1.1.pdf document or later version. If the power supply recommendations are followed, then customers will not need to go through formal certification of the product for WiFi related RF behavior for FCC. It is the product manufacturers responsibility to make sure that the power supply recommendations are followed, and that the RF behavior meets the certification requirements when the module is installed in the final product. Please check the SMSC/BridgeCo Customer Portal at https://portal.bridgeco.net/ for documents about WiFi certification and recommended interfacing and power supply schematics. SMSC CX Module 14 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 6.0.1 Antenna Considerations Here are the antennas used for certification:
Cfg Code CX870-3F Ant. Type Printed on PCB 3.56 Ant. Gain (dBi) Ant. Model Name CX870-3J Dipole CX870-3K PIFA CX870-3IB Dipole CX870-3B-D60 PIFA CX870-3BB Dipole CX870-3HB Dipole CX870-3HB PIFA CX870-3LB Linear polarization 2 2.1 2 2 2 1.7 1.7 1.7 1.7 1.7 1.7 3.2 2 3 2.8 1.28 0.84 Liteon N/A MAG. LAYERS EDA-8709-2G4C1-A66 MAG. LAYERS MSA-3612-2G4C1-A1 MAG. LAYERS EDA-8709-2G4C1-A66 MSA-0354-2G4C1-A3, black 200mm (max) MSA-0345-2G4C1-A3, gray 200mm (max) MSA-5103-2G4C1-A1, black 200mm MSA-5403-2G4C1-A1, gray 200mm MSA-5103-2G4C1-A3, black 300mm MSA-5403-2G4C1-A3, gray 300mm MSA-5103-2G4C1-A2, black 400mm MSA-5403-2G4C1-A2, gray 400mm WINiZEN W1E-WO-08 MAG. LAYERS EDA-8709-2G4C1-A66 3010000243ID (DA-E670) 3010000218ID (DA-E750) 1-888-241-00 (MFR:SKYTECH UNION INC) 1-888-241-00 (MFR: LEAD JUMP Development LTD.) Notes about antenna changes:
1) Equivalent antennas from other manufacturers may be substituted, and then marketed without a Class II permissive change 2) Equivalent antennas must be of the same type (e.g. dipole, PIFA, etc.), must be of equal or less gain than the antennas listed and previously authorized under the same FCC ID, and must have similar in band and out of band characteristics (consult specification sheet for cutoff frequencies). 3) In case of new antenna types, or higher gain antennas, a Class II permissive change is required and compliance with FCC section 15.203 must be met. SMSC CX Module 15 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 6.0.2 CX Power Settings Used For Modular Approval 6.1 RoHS Uses only RoHS compliant components 6.2 Environmental Test Withstands 4 hours at 70C, 90% RH 6.3 ESD and Transient Test (Applies to LAN and USB external connections only) ESD: +/- 2kV operation, +/- 4kV no destruction (part of CE test) Fast electrical transients: +/- 500V operation, +/- 1000V no destruction (part of CE test) 6.4 Magnetic Field Test Passes EN55022 and EN55024 (part of CE test) 6.5 MTBF
>10000 hours 6.6 Mechanical Specifications Passes drop test according to I.E.C. 68-2-32, height 100 cm, 1 corner, 6 faces. Passes vibration test with sine, vertical, 60 minutes, 600 to 18000 cpm, 1G 6.7 Module Quality Defect Rate: < 1%
AQL CR=0, MA=0.4, MI=0.4 SMSC CX Module 16 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 7 Board Dimensions and Weight 7.1 Top & Bottom View of CX870 Module without Bottom Shield 7.1.1 Top & Bottom View of CX Module with Bottom Shield SMSC CX Module 17 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 7.2 Side View of CX870 module without Bottom Shield Note:
1. All dimensions are measured in millimetres (mm). 2. PCBs thickness: 1.00 +/- 0.10mm 3. Tolerance: +/-0.10mm 4. Outline Tolerance: +/-0.10mm 5. NPTH Hole: +/-0.05mm 6. PTH Hole: +/-0.075mm 7. Connector positions, board dimensions, mounting hole positions and sizes are the same for all module variants. 8. Connector position tolerance: +/- 0.38mm 9. The 64-pin connector mounted on the module along one edge is the male gender. 10. Not all module variants have all connectors. Please see the Ordering Guide table for details of connector options. 7.2.1 Side View of CX Module with Bottom Shield except CX870-
3JB SMSC CX Module 18 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 7.2.2 Side View of CX870 Module with Bottom Shield part number CX870-3JB only 7.3 3D View of CX870 Module without Bottom Shield Note: A 3D file of the CX module in .stp format is available from the SMSC Customer Portal. SMSC CX Module 19 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 7.4 Module Weight CX870: 20g Note: Module weight applies to all versions of the module. 8 Connectors and Connections 8.1 WLAN UFL Antenna Connector (optional) The module includes two PCB strip antennas operated in diversity mode. Alternatively, one or two coaxial antenna connectors are provided for connecting external (to the module) antennas. The choice between using the strip antenna or using the coaxial sockets is a build option, determined by the position of surface mount capacitors on the module PCB. If the PCB antennas are chosen, then diversity mode is always used. If external (to the module) antenna sockets are used, then two external antennas should be used to provide 2X diversity operation. If external antenna is used, please choose the proper part number indicating two external antenna sockets. Do not use a module which has two external antenna sockets with only one external antenna connected; this will result in reduced WiFi performance. Please see ordering guide for build option details. The surface-mount antenna socket used in the CX module is:
UF.L type Ultra Small Surface Mount Coaxial Connector 8.2 Module Connectors The CX860/870 module uses 3 board-to-board connectors as interfaces to the product main board. The part numbers for the connectors needed on the product main board, which mate with the connectors on the CX module, are shown in the table below. Connector Number J1 J2 J3 14-5046-030-145-829+ (Kyocera) 14-5046-120-145-829+ (Kyocera) CSHA201-3202A001A1AB 2 x 15 x 0.5mm 2 x 60 x 0.5mm 2 x 32 x 2.54mm LCD Media Low Density Mating Connector Part Numbers Pin Configuration Connector Type Connector Purpose Number of Pins 30 120 64 Connector B2B SMSC CX Module 20 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet The pinout and signal names are shown on the next page. The following table provides an overview for the most important control and interface signals. 8.2.1 Pin Descriptions Signal(s) POWER VIN(+3.3V) VIN (+1.2V) VIN (+1.9V) 3V3RTC GND SPI SPI_DOUT SPI_DIN SPI_CLK SPI_NCS0 PDOUT1 SPI_NCS1 UART RXD1 TXD1 RXD0 TXD0 Type Description P P P P P O I I I O I I O I O Power supply input ; +3.3V. Power supply input ; +1.2V. Power Supply input; +1.9V for powering RF section. Make sure this is a clean supply. The RTC function is no longer supported. This pin should be left open. Ground (GND) connection for power supply 0V, signal returns and shielding. SPI data from DM870A to host controller. SPI data from host controller to DM870A. SPI clock from host controller to DM870A. Maximum recommended frequency is 2MHz, typical frequency is 1MHz. See Note 2 below. SPI chip select from host controller to DM870A. This signal is used as SPI_REQ, SPI request signal, from DM870A to host controller for eDMP applications. Logic 1 indicates that there is an SPI message waiting to be read, the host controller should start the SPI clock and read any changed registers. Logic 0 indicates that all changed register messages have been read and the message buffer is empty. Also GPIO-06. Not used. Leave open. UART1 input to the DM870A, used for shell access. SMSC recommends providing a connection to an external RS-232 transceiver and DB9 connector to connect to a PC COM port. Such a connection can be used for product development debugging, and for module programming control on the product manufacturing line and for module control during certification procedures. UART1 output from the DM870A, used for shell access. SMSC recommends providing a connection to an external RS-232 transceiver and DB9 connector to connect to a PC COM port. Such a connection can be used for product development debugging, and for module programming control on the product manufacturing line and for module control during certification procedures. UART0 input. Optionally used for controlling an iPod via UART. UART0 output. Optionally used for controlling an iPod via UART. SMSC CX Module 21 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet AUDIO AV2DATA0 AV2CTRL0 AV2CTRL1 AV2CLK AV4DATA1 AV4DATA0 AV2DATA1 AOUTLP/AOUTLN, AOUTRP/AOUTRN AV2DATA2 AV2DATA3 CONTROL NCS3 PDOUT0 VCO0 AV3CLK AV3CTRL0, AV3CTRL1 NRESET_MOD NPD_RF O O O O O I O O I I I I I O I/O I I I2S or left justified audio data output. Typically connected to external D/A converter input or to external DSP for further audio processing. Used for main left and right channel audio output data. See Note 3. LRCK, audio data word clock at the audio sample rate (Fs). Maximum currently supported frequency is 192kHz. MCLK, audio master clock at 256Fs. This can be used to clock an external D/A converter or DSP. SCLK, audio data bit clock at 64Fs. Allows for up to 32 audio data bits per sample word. SPDIF format output. Can support samples rates up to 192kHz, so the maximum instantaneous frequency on this pin is 24.576MHz. SPDIF input. Not used at present. Leave open. I2S or left justified audio data output. Not used at present. Leave open. Differential stereo output from PWM-DAC, right and left channels. These signals require analog low pass filtering. SMSC is not recommending using the PWM-DAC outputs because of the potential for high out-of-band noise and uncharacterized audio quality. SMSC recommends using an external D/A converter connected to AV2DATA0. I2S or left justified audio data input. Can be driven from an optional external A/D converter used to interface to iPod analog output or other analog audio sources. If not used, leave open. I2S or left justified audio data input. Not used at present. Leave open. This signal is configured as GPIO-17 and is currently not used. DM870A-internal pull-up. Leave this pin open. Factory Reset. GPIO-04. Return the CnE to factory settings. High-active input, DM870A-
internal pull-down. Pull to GND with a 10kohm resistor, unless return to factory settings from a hardware control is needed. Normally, return to factory settings is controlled from the host controller via SPI register. This pin is only monitored during the boot up process. Infrared sensor input. GPIO-05. This is a Schmitt-Trigger input and can handle inputs with slow slopes. Used for aDMP firmware builds for infrared remote control sensor output connection to DM870A. For applications with a host controller, pull this pin to +3.3V via a 10kohm resistor. ETH_NRESET Low-active reset for the on-board ethernet PHY. This output is driven by the DM870A. GPIO-12. Leave this pin open. I2C_SCL, I2C_SDA bus created by GPIO-13 and GPIO-14. No internal pull-ups; Use 4.7kohm pull up resistor on each pin to +3.3V. Maximum frequency is 400kHz. Low-active input to reset the module. This signal must be driven by an external reset generator, or by a GPIO output from a host controller. See the application section of this data sheet for the timing requirements for NRESET_MOD. Includes internal 10K pull-up resistor to +3.3V. Active low input to shut down the power for the 802.11 RF section. Internal 10kohm pull-
up resistor to +3.3V. Leave open if powering down the RF section is not required. SMSC CX Module 22 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Ethernet signals between the PHY on the module and the external magnetics
(transformer). See Note 4. Maximum bit rate is 100Mbps. 3.3V push-pull outputs (max. 12mA) to drive the ethernet LEDs. 100Mbps speed mode and activity are indicated by the outputs being low. Connect to LEDs through 220ohm resistors. USB data signals, normally connected to type A connector, USB switch or iPod dock connector. Maximum bit rate is USB High Speed at 480Mbps. Analog input for monitoring USB type A connector power. Connect to the +5V power which is driving the USB type A connector power pins. If this pin drops below 4.6V, then the DM870A will drive the USBVBUSDRV signal low to control an external power MOSFET to disconnect +5V power from the USB type A connector. See Note 5. Logic output to control an external MOSFET that is in series with USB type A connector power. See USB_VBUS above and Note 5. JTAG port for DM870A. Leave open. Can be used to drive external shift registers to make extended GPIO signals (see Note 6), or as individual GPIO signals, or to make an SD card interface. SD card firmware is not supported at present in JB2. Can be mapped to GPIO #s 08,09,10,11. Leave open if not used. Used to make an SD card interface. SD card firmware is not supported at present in JB2. Leave open. ITU-R BT.656 digital video output signals. Optionally used to make a TVout menu display, or to display decoded album art. Can be connected to video D/A converter (see Note 7), or connected to a video DSP. M O M M O I/O I/O I/O O ETHERNET ETH_RXN, ETH_RXP, ETH_TXN, ETH_TXP ETH_LED_SPEED, ETH_LED_ACT USB USB_DN, USB_DP USB_VBUS USBVBUSDRV JTAG TMS,TCK,TDI, TDO SSM SSMD4, SSMD5, SSMD6, SSMD7 SSMD0, SSMD1, SSMD2, SSMD3, SSMCLK, SSMCP, SSMCMD, SSMWP VIDEO AV0CLK, AV0CTRL0, AV0CTRL1, AV0CTRL2, AV0DATA0, AV0DATA1, AV0DATA2, AV0DATA3, AV1DATA0, AV1DATA1, AV1DATA2, AV1DATA3 SMSC CX Module 23 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet O O I/O I I/O I/O I/O I/O I/O I/O O GPIO18 Reserved for NOR flash address A22. Leave open. GPIO-16 Reserved for NOR flash address A23. Leave open. GPIO-15 Not currently assigned. Leave open. GPIO-19 Assigned to iPod dock connector iPod NDETECT. See Note 8. GPIO-07 Not currently assigned. Leave open. GPIO-00 Not currently assigned. Leave open. GPIO-01 Not currently assigned. Leave open. GPIO-02 Not currently assigned. Leave open. GPIO-03 iPod dock connector Accessory Power signal. See Note 8. Can be used, with GPIO signals above, to drive an external ethernet PHY. This is not supported by JB2 firmware. Leave open. Uses optional J1 LCD connector. Connect to local LCD display. See Note 9. Leave open if not used. GPIO (not already mentioned elsewhere in this table) A22 A23 NWAIT NCS2 VCO1 MIICRS MIICOL MIITXER MIITXCLK MII MIITXD0, MIITXD1, MIIRXD0, MIIRXD1 LCD LCDD0, LCDD1, LCDD2, LCDD3, LCDD4, LCDD5, LCDD6, LCDD7, LCDD8, LCDD9, LCDD10, LCDD11, LCDD12, LCDD13, LCDD14, LCDD15, LCD16, LCDD17, LCDCLK, LCDCTRL0, LCDCTRL1, LCDCTRL2, LCDCTRL3 SMSC CX Module 24 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Notes:
1. Signal type codes:
I 3.3V level Digital Logic Input into the DM870A O 3.3V level Digital Logic Output from the DM870A IO 3.3V level Digital Logic Input and Output (bi-directional) signal M Miscellaneous, see text for description P Power Supply 2. For SPI timing diagram for eDMP applications, please see:
BridgeCo_JB2x - DeviceControlProtocol_Registers_v_2_1.pdf, or later version. For detailed setup and hold timing details, see DM870A IC data sheet:
DM870A DS rev. 1.3_12-15-11.pdf, or later version. 3. For audio port timing diagrams, and for detailed setup and hold timing, please see DM870A IC data sheet:
DM870A DS rev. 1.3_12-15-11.pdf, or later version. 4. For example ethernet external schematic, see:
CX Module Ethernet (RJ45 + Ext.Magnetics)_V1.2.pdf, or later version. This schematic is typically compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar 5. For example USB schematics, see:
CX Module USB_V1.2.pdf, or later version. This schematic is typically compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar 6. For example use of extended GPIO shift registers, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version. 7. For example connection to a video D/A converter, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version. 8. iPod dock connector pin and GPIO assignments are under discussion. Please contact SMSC for recommendations for iPod dock connections to CX870 module. 9. For example connection to an LCD display, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version. 10. All the above signals are brought out to J2 pins. Not all the above signals are brought out to J3, the 64-pin low density connector. The J3 pin assignments table shows which signals are brought out to the J3 pins. 11. SMSC has a set of example motherboard schematics that shows example external circuitry that is typically connected to the module. Please check the SMSC/BridgeCo customer portal at https://portal.bridgeco.net/ for a copy of these example schematics. These schematics are typically compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar 12. Please check the SMSC/BridgeCo Customer Portal Download area for the latest version of the SMSC documents. Go to https://portal.bridgeco.net/. If you do not have an account, please contact SMSC. SMSC CX Module 25 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 8.2.2 Connector PIN Assignments J2 Media Connector Function GPIO IC PIN Signal PIN Number Signal IC PIN GPIO Function GND VIN (+3.3V) VIN (+3.3V) GND VIN (+1.2V) VIN (+1.2V) GND VIN (+1.9V) GND 3V3RTC GND GND SPI_DOUT SPI_DIN SPI_CLK TXD0 RXD0 RXD1 TXD1 GND SSMD7 SSMD5 SSMD3 SSMD0 SSMCLK SSMCP GND USB_DN USB_DP USBVBUSDRV GND AOUTLP AOUTLN GND A23 A22 AV3CTRL1 AV3CTRL0 AV0CTRL2 AV0CTRL1 AV0CLK AV0DATA3 AV0DATA2 AV0DATA1 AV0DATA0 GND AV2CTRL0 AV2DATA3 AV2DATA2 AV2DATA1 AV2DATA0 GND ETH_RXN ETH_RXP ETH_TXN ETH_TXP GND NWAIT NPD_RF 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 101 103 105 107 109 111 113 115 117 119 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100 102 104 106 108 110 112 114 116 118 120 GND VIN (+3.3V) VIN (+3.3V) GND VIN (+1.2V) VIN (+1.2V) GND VIN (+1.9V) GND GND TMS TCK TDI TDO SPI_NCS0 SPI_NCS1 NRESET_MOD SSMD6 SSMD4 SSMD2 SSMD1 SSMCMD SSMWP NCS3 NCS2 GND USB_VBUS GND AOUTRN AOUTRP GND PDOUT1 VCO1 PDOUT0 VCO0 AV3CLK AV0CTRL0 AV1DATA3 AV1DATA2 AV1DATA1 AV1DATA0 GND AV2CTRL1 GND AV2CLK GND AV4DATA1 AV4DATA0 GND ETH_LED_ACT ETH_LED_SPEED MIICRS MIICOL MIITXER MIITXCLK MIITXD0 MIITXD1 MIIRXD0 MIIRXD1 GND B15 C14 A16 A15 C15 B17 C12 A12 C11 B11 A13 D9 H18 J17 D2 L3 L4 J1 J2 K1 K2 R4 M1 N4 P1 P2 P3 T1 R1 U3 V2 R14 T13 T11 R12 U10 V10 U12 V12 JTAG SPI Module reset input GPIO-10 SPI_E_CLK GPIO-08 SPI_E_SDO GPIO-17 BIST activate GPIO-19 iPod NDETECT USB GPIO-06 SPI_REQ GPIO-07 GPIO-04 Factory reset GPIO-05 IR input GPIO-12 ETH NRESET Video Output MCLK SCLK SPDIF output SPDIF input Ethernet GPIO-00 GPIO-01 GPIO-02 GPIO-03 iPod Access Power D15 D14 B16 C13 B14 A14 B13 D12 B12 D11 A11 C10 D10 A1 B1 E3 K4 L2 H17 H16 T3 U2 M3 M2 L1 M4 N1 N2 N3 T1 P4 R3 T2 U1 SPI Debug UART SPI_E_NCS SPI_E_SDI GPIO-11 GPIO-09 USB I2C SDA I2C SCL GPIO-16 GPIO-18 GPIO-14 GPIO-13 Video Output LRCK A/D data 1 A/D data 0 D/A data 1 D/A data 0 Ethernet GPIO-15 K18 Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit. This allows for easy cross-reference to the DM860A or DM870A data sheet information. SMSC CX Module 26 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet J1 LCD Connector Function GPIO IC PIN Signal PIN Number Signal IC PIN GPIO Function V8 T8 V7 T7 V6 T6 V5 T5 U4 T10 T9 V9 GND LCDD0 LCDD2 LCDD4 LCDD6 LCDD8 LCDD10 LCDD12 LCDD14 LCDD16 GND LCDCLK LCDCTRL1 LCDCTRL3 GND 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 GND LCDD1 LCDD3 LCDD5 LCDD7 LCDD9 LCDD11 LCDD13 LCDD15 LCDD17 GND LCDCTRL0 LCDCTRL2 GND GND U8 R8 U7 R7 U6 R6 U5 V4 V3 R9 U9 LCD Interface LCD Interface LCD Interface LCD Interface Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit. This allows for easy cross-reference to the DM860A or DM870A data sheet information. J3 Low Density Connector Function GPIO IC PIN Signal PIN Number Signal IC PIN GPIO Function GND VIN (+3.3) VIN (+3.3) GND VIN (+1.9) VIN (+1.9) GND NWAIT NCS2 NRESET 3V3RTC GND SPI_DIN SPI_DOUT SPI_CLK SPI_NCS0 NCS3 GND SSMD7 AV3CTRL1 AV3CTRL0 GND PDOUT1 PDOUT0 VCO0 GND ETH_LED_SPEED MIITXCLK ETH_RXN ETH_TXN MIICRS GND 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 GND RXD0 TXD0 GND VIN (+1.2) VIN (+1.2) GND RXD1 TXD1 GND AV2CTRL1 AV2CTRL0 AV2CLK AV2DATA2 AV2DATA0 AV4DATA1 AV4DATA0 GND USB_DN USB_DP USBVBUSDRV USB_VBUS GND SSMD5 SSMD4 GND ETH_LED_ACT SSMD6 ETH_RXP ETH_TXP MIICOL GND B14 C13 A14 B13 R2 T1 R1 R3 U1 T2 V2 A1 B1 E3 D2 Debug UART MCLK LRCK SCLK A/D data 0 D/A data 0 SPDIF output SPDIF input USB B12 A12 GPIO-09 E-GPIO_SDI/TBA GPIO-08 E-GPIO_SDO/TBA Ethernet GPIO-10 E-GPIO_CLK/TBA C12 Ethernet T13 GPIO-01 Free Free iPod NDETECT GPIO-15 GPIO-19 SPI Free GPIO-17 E-GPIO_NCS/TBA GPIO-11 GPIO-14 I2C SDA I2C SCL GPIO-13 SPI_REQ Factory Reset IR input GPIO-06 GPIO-04 GPIO-05 Ethernet iPod Access Power GPIO-03 Ethernet K18 J17 D13 D14 D15 B16 C15 H18 D12 T3 U2 J1 K1 K2 R12 Free GPIO-00 R14 Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit. This allows for easy cross-reference to the DM860A or DM870A data sheet information. SMSC CX Module 27 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 8.2.3 GPIO Assignments GPIO Assignments for J3 64-pin Low Density Connector GPIO PIN Name 00 01 03 04 05 06 08 09 10 11 13 14 15 17 19 MIICRS MIICOL MIITXCLK PDOUT0 VCO0 PDOUT1 SSMD4 SSMD5 SSMD6 SSMD7 AV3CTRL0 AV3CTRL1 NWAIT NCS3 NCS2 PIN Number 61 62 55 47 49 45 50 48 56 37 41 39 15 33 17 Function Free Free iPOD Access Power Factory Reset IR Input Host NIREQ E_GPIO_SDO/TBA E_GPIO_SDI/TBA E_GPIO_CLK/TBA E_GPIO_NCS/TBA I2C_SCL I2C_SDA Free Free IPOD NDETECT Note: Not all 20 GPIO signals are brought out to J3 64-pin low density connector. For the CX870-3K, GPIOs 00, 01 and 03 are not brought out to J3 64-pin low density connector. J3 pin numbers 61, 62 and 55 are not connected to any signal in the CX870-3K module. 9 Application Guidelines 9.1 Power Supply sequencing and Reset Timing There are strict power sequencing and reset timing requirements. Power up the I/O voltage (3.3V) first and hold NRESET_MOD low. The core voltage (1.2V) must never be higher than (I/O voltage +0.5 V). The core voltage (1.2V) must be within the specified core voltage limits less than 300ms after the I/O voltage
(3.3V) reaches the specified I/O voltage limits. Throughout the power down process, the 3.3V supply must maintain a higher voltage than the 1.2V supply, until both have reached ground potential. To assure a proper IC reset, the power supplies must be present for a minimum time of 2ms before NRESET_MOD is de-asserted. Please see the power and reset timing figure in Section 9.1.1 below. About 1.9V, the arrival of 1.9V supply should lag behind the arrival of the 3.3V. The delay between the 1.9V and the 3.3V is not critical. Typical delay is approximately 10ms, for example using 10kohm resistor and 0.1uF capacitor on the enable pin of a 1.9V dc-to-dc converter. SMSC CX Module 28 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 9.1.1 Power up, Reset and Power Down Timing Power Up Power Down Voltage
+3.3V
+1.2V 0V
< 300ms NRESET_MOD
>= 2ms Time 9.2 RF Considerations Note that overall system, RF and WiFi performance is significantly affected by the product design, environment and the application. It is the responsibility of the product designer to ensure proper system level shielding (if required) and to verify performance and fitness for the given product features and applications. The WiFi performance will be affected by the RF environment surrounding the CX module. Please ensure that the CX module is positioned in a quiet RF environment, as far away as possible from high frequency clock signals and any other sources of RF energy. Also, make sure the antenna is not shielded by any metal objects, for example loudspeakers or other metal parts. Please make sure that the power supplies, in particular the +1.9V supply, are quiet and free from noise. SMSC recommends that systems implementing AirPlay should use a module configuration that includes on-module shielding, as well as paying particular attention to system configuration and shielding. In particular, SMSC is recommending the use of the Bottom Shield versions of the modules, which allows greater freedom in antenna positioning. Also, please see the SMSC Application Note:
SMSCAppNote - CX870_Antenna_Placement_V1_4.pdf regarding antenna positioning guidelines. Please see below picture for the recommended keep out area and cable routing for the antennas. SMSC CX Module 29 SMSC CONFIDENTIAL Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 10 Revision Control Revision V2.8
(093012) Date / Author Sept 30, 2012
/ SHs V2.8
(092412) Sept 24, 2012
/ SHs V2.8
(090912) Sept 9, 2012 /
SHs Details of Change Updated Section 4 Ordering Guide with 2 new rows for CX870-3LB & CX870-3MB and moved the row for CX870-3KB to be with them. Updated cover page with new Microchip logo;
removed SMSC logo from header; removed SMSC logo & address from legal text (page 2);
added info about Microchip to legal text;
updated to 2012. Updated filename to CX_Module_DS_Rev2-
8_MM-DD-YY.pdf. Removed CX860 from Section 7.4 Module Weight. Updated left side of footer to SMSC CX Module. Updated title of Section 7.1.1 to Top & Bottom View of CX Module with Bottom Shield. Updated title of Section 7.2.1 to Side View of CX Module with Bottom Shield except CX870-
3JB. In Sections 3.1, 3.2, 3.2.1 & 3.2.2, updated occurrences of CX870 to CX Module. Updated Section 4 Ordering Guide to remove rows for CX870-3DB and CX870-3DBS, and add a row for CX870-3KB. Removed I2C box, arrow & label in Section 2 Block Diagram. Updated Section 2 Block Diagram to show obscured black lines leading out from LCD &
SSM blocks. In Section 2 Block Diagram changed DM860A or DM870A to DM870A or DM875 In Section 1 Introduction, changed DM860A and DM870A to DM870A and DM875 In Section 4 Ordering Guide, added a Status column and status code key. In Section 4 Ordering Guide, added row for CX875-3PB. In Section 4 Ordering Guide, changed SMSC ICs heading to SMSC ICs. In Section 6.0.1 Antenna Considerations, replaced text list with a new table. Added a new section 6.0.2 CX Power Settings Used For Modular Approval. In Section 6 Regulatory Compliance and Quality, updated the Compliance entry for New Zealand / Australia for Radio Regulations from CE to AZ/NZS:4268 In Section 9.2 RF Considerations, changed the application note file path from App Note Antenna Placement recommendation CX870 modules rev1.1.pdf to SMSCAppNote -
CX870_Antenna_Placement_V1_4.pdf Reason for Change New SKUs available. Microchip purchased SMSC. Data covers all CX modules. No CX860 module available. Data sheet is for all CX modules. Drawings are for all CX modules. Drawings are for all CX modules. Pictures are for all CX modules. Updated to show actual status. Correction. Correction. CX module uses DM870A and DM875. CX module uses DM870A and DM875. To show current availability status of each module version. To give details of newly available module version. Correction. Updated information and in a clearer format. To provide more details about CX module power settings. Updated information. Provide most up to date Application Note file. SMSC CX Module 30 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author V2.7
(061312) June 13, 2012 / SHs V2.6
(050812) May 8, 2012 /
SHs V2.5
(042212) April 22, 2012
/ SHs V2.4
(032312) March 23, 2012 / SHs V2.4
(031712) March 17, 2012 / SHs Details of Change In Section 9.2 RF Considerations, added note &
picture regarding recommended keep out area and cable routing for antennas. In Notes of Section 8.2.1 Pin Descriptions, added text regarding schematics being compressed into zip files to Notes 4, 5 & 11. In Section 4 Ordering Guide, made rows for CX870-3B, 3H, 3I, 3J shaded. Removed entries in 8MByte NOR column for modules 3A, 3B, 3D, 3DS in Section 4 Ordering Guide Updated title of Section 7.2.1 Side View of CX870 Module with Bottom Shield to include except CX870-3JB Added Section 7.2.2 Side View of CX870 Module with Bottom Shield part number CX870-
3JB only Added IC PIN entry for MIICRS in J3 Low Density Connector table in Section 8.2.2 Connector PIN Assignments. Changed "MMIICRS" to "MIICRS" in Section 8.2.3 GPIO Assignments. Changed "MMIICRS" to "MIICRS" in J3 Low Density Connector table in Section 8.2.2 Connector PIN Assignments. Changed "MMIICRS" to "MIICRS" in GPIO table in Section 8.2.1 Pin Descriptions. Added important note text to Tx Power row in Section 5.3 WiFi Specification. Removed the m from "+/-1dBm" in the Tx Power row in Section 5.3 WiFi Specification. In Section 5.3 WiFi Specifications, updated Transmission Speed entry In Section 4 Ordering Guide, changed all occurrences of DM870 to DM870A & DM860 to DM860A In Section 2 Block Diagram, changed all occurrences of DM870 to DM870A & DM860 to DM860A In Section 1 Introduction, changed all occurrences of DM870 to DM870A & DM860 to DM860A In Section 8.2.1 Pin Descriptions, changed all occurrences of DM870 to DM870A In the Notes for Section 8.2.1 Pin Descriptions, changed dat_DM870_16_datasheet.pdf to DM870A DS rev. 1.3_12-15-11.pdf Changed all occurrences of DM870 to DM870A throughout the datasheet. Updated J1, J2 & J3 tables in Section 8.2.2 Connector PIN Assignments, changing DM870 to DM870A. Reason for Change Provide information about keep out areas and cable routing. Provide further information about schematic files. All new designs should use modules with a bottom shield, so modules without a bottom shield are now marked as "NOT TO BE USED FOR NEW/STANDARD MP DESIGNS" by shading the rows in the Ordering Guide table for those modules with no bottom shield. Correction. Reflect addition of separate section (7.2.2) for the CX870-3JB module. CX870-3JB has thinner bottom shield than other modules. CX module uses DM870A. Correction. Correction. Correction. To indicate which modules the Tx Power specifications relate to. Correction. Add missing 2Mbps speed. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. SMSC CX Module 31 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author V2.4
(031212) March 12, 2012 / SHs V2.4
(031012) March 10, 2012 / SHs V2.3
(112011) V2.2
(110811) V2.1
(100711) November 20, 2011 / SHs November 8, 2011 / SHs October 7, 2011 / SHs V2.0
(100211) October 2, 2011 / SHs Details of Change Changed "WiFi (on-module PCB diversity)"
column heading to "Internal PCB Diversity Antennas" in Section 4 Ordering Guide Added FCC to North America in Frequency Band entry in Section 5.3 WiFi Specification Updated TX EVM entry in Section 5.3 WiFi Specifications Updated Rx Sensitivity entry in Section 5.3 WiFi Specifications Updated Tx Power entry in Section 5.3 WiFi Specifications Added Section 3.6 Production Module with Bottom shield (Part Numbers with a "B" after the configuration letter) Added Section 3.6.1 Including J3 Low Density 64-pin connector - Bottom View Added Section 3.6.2 Including J2 High Density 120-pin connector - Bottom View Updated Section 4 Ordering Guide & Section 4.1 Part Number Syntax drawing with bottom shield versions Added another note to Section 8.2.3 GPIO Assignments Updated TX Power row in Section 5.3 WiFi Specification (CX870 only) Added Section 7.1.1 Top & Bottom View of CX870 Module with Bottom Shield Added Section 7.2.1 Side View of CX870 Module with Bottom Shield Added a note to Section 7.3 3D View of CX870 Module Added additional text to Section 9.2 RF Considerations Added CX870-3DS option to Section 4 Ordering Guide Added CX870-3K option to Section 4 Ordering Guide. Updated title of Section 6.1 from 1 RoHS to RoHS. In Section 10 Revision Control table, updated an entry for V2.0 b in the Reason for Change column from RTV to RTC Removed Preliminary Datasheet from the footer. Removed the word Preliminary from the title page. Updated Section 5.3 WiFi Specification TX Power entry for 802.11g Updated Section 6.0.1 Antenna Considerations with updated module numbering scheme Updated Section 6.7 Module Quality with new Defect Rate Reason for Change Improve clarity of meaning. Specify North American WiFi regulatory certification body. Update values to better reflect actual performance. Update values to better reflect actual performance. Show test conditions. Show module versions with bottom shield. Show bottom shield. Show bottom shield. Bottom shield versions added to table and Syntax drawing. Document missing GPIOs for CX870-3K. Show improved tolerances for TX power. Show drawings of module with Bottom Shield. Show drawings of module with Bottom Shield. To indicate availability of digital copy of 3D view of module. Providing further recommendations regarding the use of bottom shield versions and to indicate the availability of a pdf about antenna positioning guidelines. To indicate soldered shield version. Added -3K option. Correcting typo. Correcting typo. CX module is in production, so the datasheet is no longer preliminary. CX module is in production, so the datasheet is no longer preliminary. Correspond to actual production test limits. Revert to original module numbering scheme. Data is now available. SMSC CX Module 32 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author V2.0
(092611) Sept. 26, 2011 / SHs V2.0 c Sept. 14, 2011 / SHs Details of Change Updated Section 4.1 Part Number Syntax with removal of Antenna Configuration number and Note Updated Section 10 Revision Control with new Reason for Change column Change from BridgeCo logos and disclaimer text to SMSC logos and disclaimer text Updated location of red boxes in Section 3.2.1 CX870 Bottom View with 64-pin Low density connector Updated location of red boxes in Section 3.2.2 CX870 Bottom View with 120-pin Media connector Moved Section 5.3 WiFi Specification on to one page Updated Customer Portal information in Section 6 Regulatory Compliance and Quality Reverted Antenna Considerations back to Section 6.0.1; subsequently all subsections in Section 6 reverted back to original numbering Updated Notes 11 & 12 in Section 8.2.1 Pin Descriptions with updated Customer Portal information Updated Table of Contents Updated font styling of Table of Contents Update Section 2 Block Diagram : moved RJ45+Transformer & USB Type A boxes inside the drawing boundary Updated Section 5.3 WiFi Specification (CX870 only) TX Power Description entry Updated Section 5.3 WiFi Specification (CX870 only) Rx Sensitivity Description entry Updated Section 5.3 WiFi Specification (CX870 only) : add a Note underneath the table Updated Section 4 Ordering Guide : changed CX870-3D row Two Ant entry from (X)* to X Updated Section 4 Ordering Guide : removed the two blank rows Reason for Change Revert to original part numbering scheme. Corporate standard. Corporate standard. Improve alignment of red box to photo. Improve alignment of red box to photo. Improve readability. Easier to access URL directly. Decided to keep original part numbering scheme to avoid unnecessary paper work and the need to redo certifications. Easier to access URL directly. Keep TOC aligned with actual content. Easier to read. Improve accuracy of drawing. Align data with test limits. Align data with test limits. Clarification of the possible effect of changing the TX Power setting. Change to match final CX870-3D configuration. Improve readability. SMSC CX Module 33 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Revision V2.0 b Date / Author Sept. 10, 2011 / SHs V2.0 a V2.0 August 22, 2011 / SHs August 12, 2011 / SHs V1.9 c August 2, 2011 / SHs V1.9 b July 28, 2011
/ SHs Details of Change Updated the Description for pin NCS3 in Section 8.2.1 Pin Descriptions Updated Section 4 Ordering Guide : added gray background to CX870-3F & CX870-3G Updated Section 4 Ordering Guide : removed the 2 from A, H, I & J version Part Numbers Updated Section 4 Ordering Guide : split Ext. Diversity Antennas column into two, added two sub-columns One Ant. & Two Ant., moved Xs to correspond with correct sub-column Updated Section 4 Ordering Guide : CX870-3D :
removed X from WiFi column Updated Section 4 Ordering Guide : updated +
Note text Updated Section 4 Ordering Guide : moved the
+ from Part Numbers column to Ext. Diversity Antennas column Updated Section 4 Ordering Guide : removed #
Note completely Updated Section 4.1 Part Number Syntax :
Updated graphic Updated Section 4.1 Part Number Syntax :
Updated Note text Updated text in Section 8.1 WLAN UFL Antenna Connector Removed RTC elements from Section 2 Block Diagram Updated the Description for pin 3V3RTC in Section 8.2.1 Pin Descriptions Added Section 3.5 Example Production Module Showing Soldered RF Shield Updated Note Section 4.1 Part number syntax Updated all Section 3 Board Pictures to new versions + inserted new Sections 3.2.1 & 3.2.2 which show two different bottom views Updated Key Features on Title page:
removed (optional) from WiFi-certified 802.11b/g entry Updated Antenna Configuration entry in Section 4.1 Part number syntax Updated Section 4.1 Part number syntax o Updated graphic o Added a Note Changed intro text in Section 3 Board Pictures Reason for Change Update to align with actual use. Internal antenna versions are not available until performance issues are resolved. Decided to keep original part numbering scheme to avoid unnecessary paper work and the need to redo certifications. Show the number of external antenna connections. CX870-3D is not configured for internal antenna. Explained about one or two external antenna options. Proper link for "+" Note. Content now covered by "+" Note Explain antenna configuration field Explain about one or two antenna configuration. Remove references to part numbering scheme which includes the number of antennas, and repeat advice to use two external antennas. Support for RTC is removed. Support for RTC is removed. Photo shows that RF shield is soldered, needed for Japan Telec certification. Highlighted that CX870-3D does not follow the new part numbering scheme. This Note was subsequently deleted, so this is not relevant any more. Improve accuracy of data sheet photos. Updated Section 4 Ordering Guide o Changed CX870-3B1 to CX870-
3B o Updated the text for + note o Added a note to CX870-3B Ext. Diversity Antenna column o Added a new # note SMSC CX Module 34 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author Details of Change Reason for Change V1.9 a July 25, 2011
/ SHs Added Section 6.0.1 Antenna Considerations Inserted new photo for Section 3.1 Top View of CX870 Inserted new photo for Section 3.2 Bottom View of CX870 Added new Section 3.3 Production Module with Top & RF shields Added new Section 3.4 Production Module with 64-pin Connector Option Updated Section 4 Ordering Guide o Added gray background to CX870-3D o Changed CX870-3A to CX870-
o Changed CX870-3B to CX870-
o Changed CX870-3H to CX870-
3B1 o Changed CX870-3I to CX870-
o Changed CX870-3J to CX870-
3I2 3A2 3H2 3J2 o Added a Note to the Part Number title Updated Section 8.1 WLAN UFL Antenna Connector with new text Updated Section 5.3 WiFi Specification TX EVM entry to
-9dB@6MHz Updated Section 6 Regulatory Compliance
& Quality with Module Versions Passed for Radio Regulations entries Replaced the Note in Section 6 to be main body text and updated the text. Added new Section 4.1 Part number syntax Updated module weight to 20g Update section 8.1 WLAN UFL Antenna Connector Deleted section 8.1.1 Coaxial antenna connector dimensions Updated the acceptable surface-mount receptacle parts in Section 8.1 WLAN UFL Antenna Connector Added Appendix 1: Certification Notices Updated Module Quality Defect Rate field entry Updated Board Dimensions & Weight drawings Updated the Electrical Specifications table Added another Note to the Pin Descriptions section Updated Note 8 in Pin Descriptions table Re-imported Board Dimensions &
Weight drawings Updated Board Pictures images Updated board photo on Cover page V1.8 a July 10, 2011
/ SHs V1.8 July 5, 2011 /
SHs V1.7 c May 13, 2011
/ SHs V1.7 b May 11, 2011
/ SHs SMSC CX Module 35 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author Details of Change Reason for Change Updated the Feature list on Cover page Updated J1, J2 & J3 Connector PIN Assignments tables: removed Power column & re-organised columns Changed Application Notes title to Application Guidelines Updated Copyright date to 2011 Updated Table of Contents font styling Re-imported Block Diagram as a wmf file Updated Power up, Reset & Power down Timing figure Updated Pin Descriptions table Re-organised text in Power Supply sequencing & Reset Timing Re-imported J2 & J3 Connector PIN Assignment tables Added note to Module Weight section Updated the Ordering Guide Part Numbers & added new J version Added new text to the Board Pictures section Updated all Mechanical Drawings and added & removed Notes Updated the J3 Low Density Connector table Updated the GPIO Assignment table Added new Power Supply & Timing figure Updated the text in the Power Supply sequencing and Reset Timing section Updated the Key Connections table Updated Key Connections section title to Pin Descriptions Updated Detailed Connector PIN Descriptions section title to Connector PIN Assignments Updated J2 Media Connector table Updated J3 Low Density Connector table Update GPIO Assignments section and table Deleted warning note in Board Dimensions and Weights section Updated J3-Low density connector pin description table Updated GPIO Assignments table Entirely updated the Ordering Guide Added a Note to the Ordering Guide Updated the subsection titles for the Board Pictures section Updated the Block Diagram changed WiFi Antenna to Ext. Antenna Added Note to Board Dimensions and Weight section Updated the Ordering Guide removed Mfg column and consolidated into one table V1.7 a May 6, 2011 /
SHs V1.7 May 4, 2011 /
SHs V1.6 d V1.6 c V1.6 b V1.6 March 3, 2011 / SHs February 23, 2011 / SHs February 11, 2011 / SHs V1.5 b V1.5 a January 27, 2011 / SHs January 24, 2011 / SHs February 24, 2011 / SHs Updated all mechanical drawings in Board Dimensions and Weights section SMSC CX Module 36 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author Details of Change Reason for Change V1.5 January 22, 2011 / SHs V1.4 b V1.4 January 11, 2011 / SHs January 3, 2011 / SHs V1.3 December 23, 2010 / SHs V1.2 V1.1 December 19, 2010 / SHs December 13, 2010 / SHs Updated the Header to reflect Preliminary nature of datasheet Updated the datasheet to be a Preliminary Datasheet Added new feature to Summary on Front Page Updated J3 - Low Density Connector table Updated GPIO Assignments table Added note to Board Dimensions &
Weight Side Views of CX870 module section Updated text in Application Notes Power Supply Sequencing & Reset Timing section Updated Block Diagram Updated text in Connectors &
Connections WLAN UFL Antenna Connector section Updated the Application Notes, RF Considerations section Updated the module photo on the Title page Updated the Application Notes, RF Considerations section Updated Ordering Guide Added Notes to Ordering Guide Updated Block Diagram Updated J3 Low Density Connector table Updated Electrical Specifications table Added Power Consumption data to Electrical Specifications table Updated the Board Dimensions and Weight images Updated the GPIO Assignments table Added another Application Note Added titles to Application Notes Inserted CX860 and CX870 Module Weights Updated module image on Front Page Added the Ordering Guide. Updated the Block Diagram. Updated the Electrical Specifications table Updated the Absolute Maximum Ratings table Updated the Notes for Regulatory Compliance and Quality section Updated Key Connections table Updated J2 Media Connector table Updated J3 Low Density Connector table Updated GPIO Assignments table Added Board Pictures Replaced Mechanical Drawings in Board Dimensions and Weight section SMSC CX Module 37 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Revision V1.0 Date / Author October 18, 2010 / SHs Details of Change Initial Version Reason for Change SMSC CX Module 38 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet 11 Appendix 1: Certification Notices Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Labeling requirements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. This device is intended for OEM integrators only. Please see the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved access point. Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating an adapter in compliance with local regulations. Host system must be labeled with "Contains FCC ID:ZQO-CX870-3X, FCC ID displayed on the label. The label text should be updated according to the table shown in Ordering Guide section of this document. The proper letter shown in Ordering Guide Part Number column should be substituted for X. For example, for the CX870-3B module, the label text should be Contains FCC ID:ZQO-CX870-3B. SMSC CX Module 39 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL JukeBlox Networked Media Modules CX Series Datasheet Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). This device has been certified for use in Canada. Status of the listing in the Industry Canadas REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Canada, avis d'Industry Canada (IC) Cet appareil numrique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence et
(2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil Dell est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil Dell de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (les antennes se situent moins de 20 cm du corps d'une personne). Ce priphrique est homologu pour l'utilisation au Canada. Pour consulter l'entre correspondant lappareil dans la liste d'quipement radio (REL - Radio Equipment List) d'Industry Canada rendez-vous sur:
Pour des informations supplmentaires concernant l'exposition aux RF au Canada rendez-vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html SMSC CX Module 40 Revision 2.8 (09-30-12) SMSC CONFIDENTIAL
1 2 | (CX870-3LB) UserMan 20130115 | Users Manual | 1.41 MiB | January 15 2013 |
JukeBlox Networked Media Module CX Series Datasheet Integrated Ethernet + USB 2.0 Complete audio networking system on a small module WiFi-certified 802.11b/g Built-in strip antenna Optional 2X Diversity Antenna Glueless audio, video and control ports FCC certified Ideal for enabling network and USB audio playback for iPod docks, audio systems, AV Receivers, active speaker systems, internet radios, network playback adaptors SMSC CX Module Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Copyright 2012 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation (SMSC). Product names and company names are the trademarks of their respective holders. The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SMSC CX Module 2 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Table of Contents 1 INTRODUCTION............................................................................................................... 4 2 BLOCK DIAGRAM ............................................................................................................. 4 3 BOARD PICTURES............................................................................................................ 5 3.1 TOP VIEW OF CX MODULE................................................................................................... 5 3.2 BOTTOM VIEW OF CX MODULE.............................................................................................. 6 3.2.1 CX Module Bottom View w/64-pin Low Density Connector ........................................... 6 3.2.2 CX Module Bottom View w/120-pin Media Connector .................................................. 6 3.3 PRODUCTION MODULE WITH TOP AND RF SHIELDS IN PLACE TOP VIEW ............................................. 7 3.4 PRODUCTION MODULE WITH 64-PIN CONNECTOR OPTION SIDE VIEW .............................................. 7 3.5 EXAMPLE PRODUCTION MODULE SHOWING SOLDERED RF SHIELD ..................................................... 8 3.6 PRODUCTION MODULE WITH BOTTOM SHIELD (PART NUMBERS WITH A B AFTER THE CONFIGURATION LETTER) 9 3.6.1 Including J3 Low Density 64-pin connector Bottom View........................................... 9 Including J2 High Density 120-pin connector Bottom View ........................................ 9 3.6.2 4 ORDERING GUIDE ......................................................................................................... 10 4.1 PART NUMBER SYNTAX ..................................................................................................... 10 5 ELECTRICAL SPECIFICATIONS....................................................................................... 11 5.1 ABSOLUTE MAXIMUM RATINGS ............................................................................................ 12 5.2 OPERATING CONDITIONS................................................................................................... 12 5.3 WIFI SPECIFICATION (CX870 ONLY).................................................................................... 13 6 REGULATORY COMPLIANCE AND QUALITY .................................................................... 14 6.0.1 Antenna Considerations ........................................................................................... 15 6.0.2 CX Power Settings Used For Modular Approval ............................................................ 16 6.1 ROHS ........................................................................................................................ 16 6.2 ENVIRONMENTAL TEST...................................................................................................... 16 6.3 ESD AND TRANSIENT TEST (APPLIES TO LAN AND USB EXTERNAL CONNECTIONS ONLY)......................... 16 6.4 MAGNETIC FIELD TEST ..................................................................................................... 16 6.5 MTBF ........................................................................................................................ 16 6.6 MECHANICAL SPECIFICATIONS............................................................................................. 16 6.7 MODULE QUALITY ........................................................................................................... 16 7 BOARD DIMENSIONS AND WEIGHT ............................................................................... 17 7.1 TOP & BOTTOM VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD............................................... 17 7.1.1 Top & Bottom View of CX Module with Bottom Shield................................................ 17 7.2 SIDE VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD ........................................................... 18 7.2.1 Side View of CX Module with Bottom Shield except CX870-3JB .................................. 18 7.2.2 Side View of CX870 Module with Bottom Shield part number CX870-3JB only .............. 19 7.3 3D VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD............................................................. 19 7.4 MODULE WEIGHT ........................................................................................................... 20 8 CONNECTORS AND CONNECTIONS ................................................................................ 20 8.1 WLAN UFL ANTENNA CONNECTOR (OPTIONAL)........................................................................ 20 8.2 MODULE CONNECTORS ..................................................................................................... 20 8.2.1 Pin Descriptions ................................................................................................... 21 8.2.2 Connector PIN Assignments................................................................................... 26 8.2.3 GPIO Assignments................................................................................................ 28 9 APPLICATION GUIDELINES ........................................................................................... 28 9.1 POWER SUPPLY SEQUENCING AND RESET TIMING ....................................................................... 28 9.1.1 Power up, Reset and Power Down Timing ................................................................ 29 9.2 RF CONSIDERATIONS ...................................................................................................... 29 10 REVISION CONTROL .................................................................................................... 30 11 APPENDIX 1: CERTIFICATION NOTICES ...................................................................... 39 SMSC CX Module 3 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 1 Introduction The CX-series module is a single-board networked media player module, based on SMSCs DM870A and DM875 media processors, and enables fast product developments with Ethernet, USB and optional WiFi connectivity. The module connects to standard legacy components in various audio, video/LCD and control formats. 2 Block Diagram JukeBlox Networked Media Module CX Series 3.3V 1.2V 1.9V Reset In Ethernet Transceiver RJ-45
+
Transformer USB Type-A Display SD-Card 3x6bit RGB 4/8bit MMC Apple Co-
processor CCIR-656 A/D, D/A S/PDIF Video Out Audio I/O Host Controller/
LCD setup SPI Ctrl. GPIO I2C PWM DAC UART JTAG DM870A or DM875 RST RMII USB LCD SSM I2C DAC AV Ports UART JTAG SPI GPIO Flash Mem. Bus NAND-Flash 256 Mbit SDRAM NOR-Flash 802.11 2.4 GHz RF transceiver RF Amp. ANT switch Ext. Antenna PCB Antenna Ext. Antenna PCB Antenna 24.000 MHz Note: Choice of antenna is a build option, see Ordering Guide. SMSC CX Module 4 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 3 Board Pictures Please note that all production modules include the RF and top shield. The below top view has the shields temporarily removed to show the components. Also, please note that the 64-pin connector mounted on the module is the male gender. 3.1 Top View of CX Module 802.11b/g front-end External Antenna SMSC processor PCB antenna Ethernet PHY Connectors PCB antenna SDRAM SMSC CX Module 5 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 3.2 Bottom View of CX Module 3.2.1 CX Module Bottom View w/64-pin Low Density Connector LCD connector Low density connector 3.2.2 CX Module Bottom View w/120-pin Media Connector LCD connector FLASH FLASH Media connector SMSC CX Module 6 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 3.3 Production Module with Top and RF shields in place Top View 3.4 Production Module with 64-pin Connector Option Side View 7 Revision 2.8 (09-30-12) SMSC CX Module JukeBlox Networked Media Modules CX Series Datasheet 3.5 Example Production Module Showing Soldered RF Shield Revision 2.8 (09-30-12) 8 SMSC CX Module JukeBlox Networked Media Modules CX Series Datasheet 3.6 Production Module with Bottom Shield (Part Numbers with a B after the configuration letter) 3.6.1 Including J3 Low Density 64-pin connector Bottom View 3.6.2 View Including J2 High Density 120-pin connector Bottom 9 SMSC CX Module Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 4 Ordering Guide Part Number Status SMSC ICs CX870-3A CX870-3B CX870-3D CX870-3DS CX870-3F CX870-3G CX870-3H CX870-3I CX870-3J CX870-3K CX870-3BB CX870-3HB CX870-3IB CX870-3JB CX870-3KB CX780-3LB CX870-3MB CX875-3PB CO O CO CO O O O O O CO SA SA SA SA CA CA CA SA DM870A+T6201 DM870A+T6201 DM870A+T6201
% DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM870A+T6201 DM875+T6201 Internal PCB Diversity Antennas Ext. Diversity Antennas (UFL Conn.)+
Ethernet USB Host Low density 64-pin Conn. Hi density 120-pin Conn. Hi density LCD Conn. 32MB SDRAM 16MB SDRAM 8MB SDRAM 1Gb NAND 8MB NOR Top Module Shield Bottom Module Shield One Ant. X X X X X X Two Ant.
(X)*
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: Please note that the Apple Authentication Coprocessor will not be provided on the CX module. The Apple Authentication Coprocessor should be provided on the product motherboard, connected to the SDA, SCL signals from the CX module. Note: Shaded rows indicate Custom or Obsolete configuration - NOT TO BE USED FOR NEW/STANDARD MP DESIGNS. Status code: C - Custom | S - Standard | O - Obsolete | A - Available
* Connector on board, but requires board modification to enable the connector.
+ The position of the X in the One Ant. column indicates that there is one external antenna connector provided. The position of the X in the Two Ant. column indicates that there are two external antenna connectors provided. Do not use a module which has two external antenna connectors with only one external antenna connected. Leaving one antenna socket open will degrade WiFi performance. SMSC recommends always using modules with two external antennas for best performance.
% The CX870-3DS is the same as CX870-3D, except that the RF shield is soldered in place. 4.1 Part Number Syntax SMSC CX Module 10 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 5 Electrical Specifications Parameter State Model Voltage Power Supply Input Voltage Logic Input high voltage Logic Input low voltage Logic Input threshold voltage Schmitt-trigger input low to high threshold voltage Schmitt-trigger input high to low threshold voltage Logic Output high voltage Logic Output low voltage Logic Low-level output current
(VOL=0.4V) Logic High-level output current
(VOH=2.4V) Reset State Current Consumption Operating in idle state CX870 Playback over WiFi high mips
& rate condition 3.3 1.2 1.9 3.3 1.2 1.9 3.3 1.2 1.9 VIN Symbol min. 3.0 1.08 1.8 1.7
-0.3 1.29 VIH VIL VIT typ. max. Units 3.3 V 1.2 V 1.9 V V V V 3.6 1.32 2.0 5.5 0.7 1.5 1.39 VIT+
VIT-
VOH VOL IOL IOH I3.3 I1.2 I1.9 I3.3 I1.2 I1.9 I3.3 I1.2 I1.9 1.58 1.65 1.71 0.95 1.01 1.06 2.4 0.4 V V V V
-9.6
-15.6
-19.3 mA 11.1 22.5 35.3 mA 60 32 18 185 337 257 240 347 258 78 42 23 241 438 334 312 451 335 mA mA mA mA mA mA mA mA mA Note: The maximum current values are 30% larger than the typical values. The maximum values are intended to be used for power supply sizing calculations. SMSC CX Module 11 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 5.1 Absolute Maximum Ratings Parameter Component Min Max Units 3.3V Supply Voltage 1.2V Supply Voltage 1.9V Supply Voltage Main Logic Input Voltage Logic Output Voltage
-0.5
-0.5
-0.5
-0.5
-0.5 4.6 1.8 2.2 6 4.6 V V V V V 5.2 Operating Conditions Parameter Operating Temperature Operating Humidity Storage Temperature Storage Humidity Storage Temperature Cycle Test 24 hrs Min 0 10
-10 10
-10 Max
+70 90 (non condensing)
+75 95 (non condensing)
+75 Units C
%RH C
%RH C SMSC CX Module 12 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 5.3 WiFi Specification (CX870 only) Feature WLAN Standards Frequency Band Modulation Transmission Speed Tx Power Power-on Ramp RF Carrier Suppression TX EVM Rx Sensitivity
(incl. CE2 Mother board) Throughput Rate
(measured for each module) SMSC CX Module Description IEEE 802.11b IEEE 802.11g 2.412 2.472 GHz (2.4GHz ISM Band, 13 Channels) Channel 1 - Channel 13 North America FCC, Japan Telec, Europe ETSI 802.11b mode (DS-SS: IEEE 802.11b) 802.11g mode (OFDM: IEEE 802.11g) 802.11b mode 11Mbps, 5.5Mbps, 2Mbps, 1Mbps 802.11g mode 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps 802.11b mode: 16.5dBm, +/-1dB 802.11g mode: 15.0dBm, +/-1dB Using nominal production settings as follows:
Channel RF11 Rate: 11B ='3' (11Mbps), 11G = '8' (54Mbps) MIB: 11B=9, 11G=1 (Reference for Tx Power Tuning) Room temperature The above TX Power specifications will apply to modules shipped from Liteon after 9 April 2012.
< 2us
< 15dBc 802.11b mode: <-22dB 802.11g mode: <-25dB 802.11b mode:
<=-82dBm @ 1Mbps, <=81dBm @ 2Mbps, <=-81dBm @ 5.5Mbps,
<=-78dBm @ 11Mbps 802.11g mode:
<=-82dBm @ 9Mbps, <=-81dBm @ 18Mbps, <=-75dBm @ 36Mbps,
<=-70dBm @ 54Mbps See factory test specification Note: About Tx Power, different (higher/lower) RF output power settings may be used for specific regions, antennas and/or enclosures, in which case re-certification may be required. 13 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 6 Regulatory Compliance and Quality Description Electromagnetic Compatibility
(Prescan) Country USA Europe Radio Regulations (CX870 only) USA Japan Canada Europe New Zealand/Australia China Korea Compliance FCC CFR47 Part15B EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 61000-4-11 FCC Part 15C Telec IC RSS-210 CE AZ/NZS:4268 SRRC KCC Module Versions Passed B, D, F, H, I, J B B, D, F, H, I, J B SMSC does not certify all module variants for all countries. Please see above table for those module versions for which certain certifications have already been done. Please contact your SMSC sales office for the latest information about which modules are certified for which countries, and arranging for additional certification for your chosen module if needed. Any additional certifications will need to be paid for by the customer. Product manufacturers are responsible for the end product certification. SMSC can help manufacturers to prepare for the WiFi Alliance tests by providing an example test plan and the required commands to enable special test modes. Please contact your SMSC sales office about WiFi Alliance logo certification assistance. The CX module has received Limited Module Approval (LMA) from FCC. This is because the CX module does not have a built-in +3.3V regulator circuit. SMSC recommends that customers follow the +3.3V supply voltage requirements given in this data sheet, and follow the +3.3V power supply design given in CX Module Power Supply_V1.1.pdf document or later version. If the power supply recommendations are followed, then customers will not need to go through formal certification of the product for WiFi related RF behavior for FCC. It is the product manufacturers responsibility to make sure that the power supply recommendations are followed, and that the RF behavior meets the certification requirements when the module is installed in the final product. Please check the SMSC/BridgeCo Customer Portal at https://portal.bridgeco.net/ for documents about WiFi certification and recommended interfacing and power supply schematics. SMSC CX Module 14 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 6.0.1 Antenna Considerations Here are the antennas used for certification:
Cfg Code CX870-3F Ant. Type Printed on PCB 3.56 Ant. Gain (dBi) Ant. Model Name CX870-3J Dipole CX870-3K PIFA CX870-3IB Dipole CX870-3B-D60 PIFA CX870-3BB Dipole CX870-3HB Dipole CX870-3HB PIFA CX870-3LB Linear polarization Inverted-F Antenna 2 2.1 2 2 2 1.7 1.7 1.7 1.7 1.7 1.7 3.2 2 3 2.8 1.28 0.84 2.67 2.19 Liteon N/A MAG. LAYERS EDA-8709-2G4C1-A66 MAG. LAYERS MSA-3612-2G4C1-A1 MAG. LAYERS EDA-8709-2G4C1-A66 MSA-0354-2G4C1-A3, black 200mm (max) MSA-0345-2G4C1-A3, gray 200mm (max) MSA-5103-2G4C1-A1, black 200mm MSA-5403-2G4C1-A1, gray 200mm MSA-5103-2G4C1-A3, black 300mm MSA-5403-2G4C1-A3, gray 300mm MSA-5103-2G4C1-A2, black 400mm MSA-5403-2G4C1-A2, gray 400mm WINiZEN W1E-WO-08 MAG. LAYERS EDA-8709-2G4C1-A66 3010000243ID (DA-E670) 3010000218ID (DA-E750) 1-888-241-00 (MFR:SKYTECH UNION INC) 1-888-241-00 (MFR: LEAD JUMP Development LTD.) 2174241-2 (Length of cable: 390mm) 2174241-1 (Length of cable: 330mm) Notes about antenna changes:
1) Equivalent antennas from other manufacturers may be substituted, and then marketed without a Class II permissive change 2) Equivalent antennas must be of the same type (e.g. dipole, PIFA, etc.), must be of equal or less gain than the antennas listed and previously authorized under the same FCC ID, and must have similar in band and out of band characteristics (consult specification sheet for cutoff frequencies). 3) In case of new antenna types, or higher gain antennas, a Class II permissive change is required and compliance with FCC section 15.203 must be met. 15 Revision 2.8 (09-30-12) SMSC CX Module JukeBlox Networked Media Modules CX Series Datasheet 6.0.2 CX Power Settings Used For Modular Approval 6.1 RoHS Uses only RoHS compliant components 6.2 Environmental Test Withstands 4 hours at 70C, 90% RH 6.3 ESD and Transient Test (Applies to LAN and USB external connections only) ESD: +/- 2kV operation, +/- 4kV no destruction (part of CE test) Fast electrical transients: +/- 500V operation, +/- 1000V no destruction (part of CE test) 6.4 Magnetic Field Test Passes EN55022 and EN55024 (part of CE test) 6.5 MTBF
>10000 hours 6.6 Mechanical Specifications Passes drop test according to I.E.C. 68-2-32, height 100 cm, 1 corner, 6 faces. Passes vibration test with sine, vertical, 60 minutes, 600 to 18000 cpm, 1G 6.7 Module Quality Defect Rate: < 1%
AQL CR=0, MA=0.4, MI=0.4 SMSC CX Module 16 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 7 Board Dimensions and Weight 7.1 Top & Bottom View of CX870 Module without Bottom Shield 7.1.1 Top & Bottom View of CX Module with Bottom Shield SMSC CX Module 17 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 7.2 Side View of CX870 module without Bottom Shield Note:
1. All dimensions are measured in millimetres (mm). 2. PCBs thickness: 1.00 +/- 0.10mm 3. Tolerance: +/-0.10mm 4. Outline Tolerance: +/-0.10mm 5. NPTH Hole: +/-0.05mm 6. PTH Hole: +/-0.075mm 7. Connector positions, board dimensions, mounting hole positions and sizes are the same for all module variants. 8. Connector position tolerance: +/- 0.38mm 9. The 64-pin connector mounted on the module along one edge is the male gender. 10. Not all module variants have all connectors. Please see the Ordering Guide table for details of connector options. 7.2.1 Side View of CX Module with Bottom Shield except CX870-
3JB SMSC CX Module 18 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 7.2.2 Side View of CX870 Module with Bottom Shield part number CX870-3JB only 7.3 3D View of CX870 Module without Bottom Shield Note: A 3D file of the CX module in .stp format is available from the SMSC Customer Portal. SMSC CX Module 19 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 7.4 Module Weight CX870: 20g Note: Module weight applies to all versions of the module. 8 Connectors and Connections 8.1 WLAN UFL Antenna Connector (optional) The module includes two PCB strip antennas operated in diversity mode. Alternatively, one or two coaxial antenna connectors are provided for connecting external (to the module) antennas. The choice between using the strip antenna or using the coaxial sockets is a build option, determined by the position of surface mount capacitors on the module PCB. If the PCB antennas are chosen, then diversity mode is always used. If external (to the module) antenna sockets are used, then two external antennas should be used to provide 2X diversity operation. If external antenna is used, please choose the proper part number indicating two external antenna sockets. Do not use a module which has two external antenna sockets with only one external antenna connected; this will result in reduced WiFi performance. Please see ordering guide for build option details. The surface-mount antenna socket used in the CX module is:
UF.L type Ultra Small Surface Mount Coaxial Connector 8.2 Module Connectors The CX860/870 module uses 3 board-to-board connectors as interfaces to the product main board. The part numbers for the connectors needed on the product main board, which mate with the connectors on the CX module, are shown in the table below. Connector Number J1 J2 J3 14-5046-030-145-829+ (Kyocera) 14-5046-120-145-829+ (Kyocera) CSHA201-3202A001A1AB 2 x 15 x 0.5mm 2 x 60 x 0.5mm 2 x 32 x 2.54mm LCD Media Low Density Mating Connector Part Numbers Pin Configuration Connector Type Connector Purpose Number of Pins 30 120 64 Connector B2B SMSC CX Module 20 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet The pinout and signal names are shown on the next page. The following table provides an overview for the most important control and interface signals. 8.2.1 Pin Descriptions Signal(s) POWER VIN(+3.3V) VIN (+1.2V) VIN (+1.9V) 3V3RTC GND SPI SPI_DOUT SPI_DIN SPI_CLK SPI_NCS0 PDOUT1 SPI_NCS1 UART RXD1 TXD1 RXD0 TXD0 Type Description P P P P P O I I I O I I O I O Power supply input ; +3.3V. Power supply input ; +1.2V. Power Supply input; +1.9V for powering RF section. Make sure this is a clean supply. The RTC function is no longer supported. This pin should be left open. Ground (GND) connection for power supply 0V, signal returns and shielding. SPI data from DM870A to host controller. SPI data from host controller to DM870A. SPI clock from host controller to DM870A. Maximum recommended frequency is 2MHz, typical frequency is 1MHz. See Note 2 below. SPI chip select from host controller to DM870A. This signal is used as SPI_REQ, SPI request signal, from DM870A to host controller for eDMP applications. Logic 1 indicates that there is an SPI message waiting to be read, the host controller should start the SPI clock and read any changed registers. Logic 0 indicates that all changed register messages have been read and the message buffer is empty. Also GPIO-06. Not used. Leave open. UART1 input to the DM870A, used for shell access. SMSC recommends providing a connection to an external RS-232 transceiver and DB9 connector to connect to a PC COM port. Such a connection can be used for product development debugging, and for module programming control on the product manufacturing line and for module control during certification procedures. UART1 output from the DM870A, used for shell access. SMSC recommends providing a connection to an external RS-232 transceiver and DB9 connector to connect to a PC COM port. Such a connection can be used for product development debugging, and for module programming control on the product manufacturing line and for module control during certification procedures. UART0 input. Optionally used for controlling an iPod via UART. UART0 output. Optionally used for controlling an iPod via UART. SMSC CX Module 21 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet AUDIO AV2DATA0 AV2CTRL0 AV2CTRL1 AV2CLK AV4DATA1 AV4DATA0 AV2DATA1 AOUTLP/AOUTLN, AOUTRP/AOUTRN AV2DATA2 AV2DATA3 CONTROL NCS3 PDOUT0 VCO0 AV3CLK AV3CTRL0, AV3CTRL1 NRESET_MOD NPD_RF O O O O O I O O I I I I I O I/O I I I2S or left justified audio data output. Typically connected to external D/A converter input or to external DSP for further audio processing. Used for main left and right channel audio output data. See Note 3. LRCK, audio data word clock at the audio sample rate (Fs). Maximum currently supported frequency is 192kHz. MCLK, audio master clock at 256Fs. This can be used to clock an external D/A converter or DSP. SCLK, audio data bit clock at 64Fs. Allows for up to 32 audio data bits per sample word. SPDIF format output. Can support samples rates up to 192kHz, so the maximum instantaneous frequency on this pin is 24.576MHz. SPDIF input. Not used at present. Leave open. I2S or left justified audio data output. Not used at present. Leave open. Differential stereo output from PWM-DAC, right and left channels. These signals require analog low pass filtering. SMSC is not recommending using the PWM-DAC outputs because of the potential for high out-of-band noise and uncharacterized audio quality. SMSC recommends using an external D/A converter connected to AV2DATA0. I2S or left justified audio data input. Can be driven from an optional external A/D converter used to interface to iPod analog output or other analog audio sources. If not used, leave open. I2S or left justified audio data input. Not used at present. Leave open. This signal is configured as GPIO-17 and is currently not used. DM870A-internal pull-up. Leave this pin open. Factory Reset. GPIO-04. Return the CnE to factory settings. High-active input, DM870A-
internal pull-down. Pull to GND with a 10kohm resistor, unless return to factory settings from a hardware control is needed. Normally, return to factory settings is controlled from the host controller via SPI register. This pin is only monitored during the boot up process. Infrared sensor input. GPIO-05. This is a Schmitt-Trigger input and can handle inputs with slow slopes. Used for aDMP firmware builds for infrared remote control sensor output connection to DM870A. For applications with a host controller, pull this pin to +3.3V via a 10kohm resistor. ETH_NRESET Low-active reset for the on-board ethernet PHY. This output is driven by the DM870A. GPIO-12. Leave this pin open. I2C_SCL, I2C_SDA bus created by GPIO-13 and GPIO-14. No internal pull-ups; Use 4.7kohm pull up resistor on each pin to +3.3V. Maximum frequency is 400kHz. Low-active input to reset the module. This signal must be driven by an external reset generator, or by a GPIO output from a host controller. See the application section of this data sheet for the timing requirements for NRESET_MOD. Includes internal 10K pull-up resistor to +3.3V. Active low input to shut down the power for the 802.11 RF section. Internal 10kohm pull-
up resistor to +3.3V. Leave open if powering down the RF section is not required. SMSC CX Module 22 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Ethernet signals between the PHY on the module and the external magnetics
(transformer). See Note 4. Maximum bit rate is 100Mbps. 3.3V push-pull outputs (max. 12mA) to drive the ethernet LEDs. 100Mbps speed mode and activity are indicated by the outputs being low. Connect to LEDs through 220ohm resistors. USB data signals, normally connected to type A connector, USB switch or iPod dock connector. Maximum bit rate is USB High Speed at 480Mbps. Analog input for monitoring USB type A connector power. Connect to the +5V power which is driving the USB type A connector power pins. If this pin drops below 4.6V, then the DM870A will drive the USBVBUSDRV signal low to control an external power MOSFET to disconnect +5V power from the USB type A connector. See Note 5. Logic output to control an external MOSFET that is in series with USB type A connector power. See USB_VBUS above and Note 5. JTAG port for DM870A. Leave open. Can be used to drive external shift registers to make extended GPIO signals (see Note 6), or as individual GPIO signals, or to make an SD card interface. SD card firmware is not supported at present in JB2. Can be mapped to GPIO #s 08,09,10,11. Leave open if not used. Used to make an SD card interface. SD card firmware is not supported at present in JB2. Leave open. ITU-R BT.656 digital video output signals. Optionally used to make a TVout menu display, or to display decoded album art. Can be connected to video D/A converter (see Note 7), or connected to a video DSP. M O M M O I/O I/O I/O O ETHERNET ETH_RXN, ETH_RXP, ETH_TXN, ETH_TXP ETH_LED_SPEED, ETH_LED_ACT USB USB_DN, USB_DP USB_VBUS USBVBUSDRV JTAG TMS,TCK,TDI, TDO SSM SSMD4, SSMD5, SSMD6, SSMD7 SSMD0, SSMD1, SSMD2, SSMD3, SSMCLK, SSMCP, SSMCMD, SSMWP VIDEO AV0CLK, AV0CTRL0, AV0CTRL1, AV0CTRL2, AV0DATA0, AV0DATA1, AV0DATA2, AV0DATA3, AV1DATA0, AV1DATA1, AV1DATA2, AV1DATA3 SMSC CX Module 23 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet O O I/O I I/O I/O I/O I/O I/O I/O O GPIO18 Reserved for NOR flash address A22. Leave open. GPIO-16 Reserved for NOR flash address A23. Leave open. GPIO-15 Not currently assigned. Leave open. GPIO-19 Assigned to iPod dock connector iPod NDETECT. See Note 8. GPIO-07 Not currently assigned. Leave open. GPIO-00 Not currently assigned. Leave open. GPIO-01 Not currently assigned. Leave open. GPIO-02 Not currently assigned. Leave open. GPIO-03 iPod dock connector Accessory Power signal. See Note 8. Can be used, with GPIO signals above, to drive an external ethernet PHY. This is not supported by JB2 firmware. Leave open. Uses optional J1 LCD connector. Connect to local LCD display. See Note 9. Leave open if not used. GPIO (not already mentioned elsewhere in this table) A22 A23 NWAIT NCS2 VCO1 MIICRS MIICOL MIITXER MIITXCLK MII MIITXD0, MIITXD1, MIIRXD0, MIIRXD1 LCD LCDD0, LCDD1, LCDD2, LCDD3, LCDD4, LCDD5, LCDD6, LCDD7, LCDD8, LCDD9, LCDD10, LCDD11, LCDD12, LCDD13, LCDD14, LCDD15, LCD16, LCDD17, LCDCLK, LCDCTRL0, LCDCTRL1, LCDCTRL2, LCDCTRL3 SMSC CX Module 24 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Notes:
1. Signal type codes:
I 3.3V level Digital Logic Input into the DM870A O 3.3V level Digital Logic Output from the DM870A IO 3.3V level Digital Logic Input and Output (bi-directional) signal M Miscellaneous, see text for description P Power Supply 2. For SPI timing diagram for eDMP applications, please see:
BridgeCo_JB2x - DeviceControlProtocol_Registers_v_2_1.pdf, or later version. For detailed setup and hold timing details, see DM870A IC data sheet:
DM870A DS rev. 1.3_12-15-11.pdf, or later version. 3. For audio port timing diagrams, and for detailed setup and hold timing, please see DM870A IC data sheet:
DM870A DS rev. 1.3_12-15-11.pdf, or later version. 4. For example ethernet external schematic, see:
CX Module Ethernet (RJ45 + Ext.Magnetics)_V1.2.pdf, or later version. This schematic is typically compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar 5. For example USB schematics, see:
CX Module USB_V1.2.pdf, or later version. This schematic is typically compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar 6. For example use of extended GPIO shift registers, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version. 7. For example connection to a video D/A converter, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version. 8. iPod dock connector pin and GPIO assignments are under discussion. Please contact SMSC for recommendations for iPod dock connections to CX870 module. 9. For example connection to an LCD display, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version. 10. All the above signals are brought out to J2 pins. Not all the above signals are brought out to J3, the 64-pin low density connector. The J3 pin assignments table shows which signals are brought out to the J3 pins. 11. SMSC has a set of example motherboard schematics that shows example external circuitry that is typically connected to the module. Please check the SMSC/BridgeCo customer portal at https://portal.bridgeco.net/ for a copy of these example schematics. These schematics are typically compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar 12. Please check the SMSC/BridgeCo Customer Portal Download area for the latest version of the SMSC documents. Go to https://portal.bridgeco.net/. If you do not have an account, please contact SMSC. SMSC CX Module 25 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 8.2.2 Connector PIN Assignments J2 Media Connector Function GPIO IC PIN Signal PIN Number Signal IC PIN GPIO Function GND VIN (+3.3V) VIN (+3.3V) GND VIN (+1.2V) VIN (+1.2V) GND VIN (+1.9V) GND 3V3RTC GND GND SPI_DOUT SPI_DIN SPI_CLK TXD0 RXD0 RXD1 TXD1 GND SSMD7 SSMD5 SSMD3 SSMD0 SSMCLK SSMCP GND USB_DN USB_DP USBVBUSDRV GND AOUTLP AOUTLN GND A23 A22 AV3CTRL1 AV3CTRL0 AV0CTRL2 AV0CTRL1 AV0CLK AV0DATA3 AV0DATA2 AV0DATA1 AV0DATA0 GND AV2CTRL0 AV2DATA3 AV2DATA2 AV2DATA1 AV2DATA0 GND ETH_RXN ETH_RXP ETH_TXN ETH_TXP GND NWAIT NPD_RF 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 101 103 105 107 109 111 113 115 117 119 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100 102 104 106 108 110 112 114 116 118 120 GND VIN (+3.3V) VIN (+3.3V) GND VIN (+1.2V) VIN (+1.2V) GND VIN (+1.9V) GND GND TMS TCK TDI TDO SPI_NCS0 SPI_NCS1 NRESET_MOD SSMD6 SSMD4 SSMD2 SSMD1 SSMCMD SSMWP NCS3 NCS2 GND USB_VBUS GND AOUTRN AOUTRP GND PDOUT1 VCO1 PDOUT0 VCO0 AV3CLK AV0CTRL0 AV1DATA3 AV1DATA2 AV1DATA1 AV1DATA0 GND AV2CTRL1 GND AV2CLK GND AV4DATA1 AV4DATA0 GND ETH_LED_ACT ETH_LED_SPEED MIICRS MIICOL MIITXER MIITXCLK MIITXD0 MIITXD1 MIIRXD0 MIIRXD1 GND B15 C14 A16 A15 C15 B17 C12 A12 C11 B11 A13 D9 H18 J17 D2 L3 L4 J1 J2 K1 K2 R4 M1 N4 P1 P2 P3 T1 R1 U3 V2 R14 T13 T11 R12 U10 V10 U12 V12 JTAG SPI Module reset input GPIO-10 SPI_E_CLK GPIO-08 SPI_E_SDO GPIO-17 BIST activate GPIO-19 iPod NDETECT USB GPIO-06 SPI_REQ GPIO-07 GPIO-04 Factory reset GPIO-05 IR input GPIO-12 ETH NRESET Video Output MCLK SCLK SPDIF output SPDIF input Ethernet GPIO-00 GPIO-01 GPIO-02 GPIO-03 iPod Access Power D15 D14 B16 C13 B14 A14 B13 D12 B12 D11 A11 C10 D10 A1 B1 E3 K4 L2 H17 H16 T3 U2 M3 M2 L1 M4 N1 N2 N3 T1 P4 R3 T2 U1 SPI Debug UART SPI_E_NCS SPI_E_SDI GPIO-11 GPIO-09 USB I2C SDA I2C SCL GPIO-16 GPIO-18 GPIO-14 GPIO-13 Video Output LRCK A/D data 1 A/D data 0 D/A data 1 D/A data 0 Ethernet GPIO-15 K18 Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit. This allows for easy cross-reference to the DM860A or DM870A data sheet information. SMSC CX Module 26 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet J1 LCD Connector Function GPIO IC PIN Signal PIN Number Signal IC PIN GPIO Function V8 T8 V7 T7 V6 T6 V5 T5 U4 T10 T9 V9 GND LCDD0 LCDD2 LCDD4 LCDD6 LCDD8 LCDD10 LCDD12 LCDD14 LCDD16 GND LCDCLK LCDCTRL1 LCDCTRL3 GND 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 GND LCDD1 LCDD3 LCDD5 LCDD7 LCDD9 LCDD11 LCDD13 LCDD15 LCDD17 GND LCDCTRL0 LCDCTRL2 GND GND U8 R8 U7 R7 U6 R6 U5 V4 V3 R9 U9 LCD Interface LCD Interface LCD Interface LCD Interface Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit. This allows for easy cross-reference to the DM860A or DM870A data sheet information. J3 Low Density Connector Function GPIO IC PIN Signal PIN Number Signal IC PIN GPIO Function GND VIN (+3.3) VIN (+3.3) GND VIN (+1.9) VIN (+1.9) GND NWAIT NCS2 NRESET 3V3RTC GND SPI_DIN SPI_DOUT SPI_CLK SPI_NCS0 NCS3 GND SSMD7 AV3CTRL1 AV3CTRL0 GND PDOUT1 PDOUT0 VCO0 GND ETH_LED_SPEED MIITXCLK ETH_RXN ETH_TXN MIICRS GND 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 GND RXD0 TXD0 GND VIN (+1.2) VIN (+1.2) GND RXD1 TXD1 GND AV2CTRL1 AV2CTRL0 AV2CLK AV2DATA2 AV2DATA0 AV4DATA1 AV4DATA0 GND USB_DN USB_DP USBVBUSDRV USB_VBUS GND SSMD5 SSMD4 GND ETH_LED_ACT SSMD6 ETH_RXP ETH_TXP MIICOL GND B14 C13 A14 B13 R2 T1 R1 R3 U1 T2 V2 A1 B1 E3 D2 Debug UART MCLK LRCK SCLK A/D data 0 D/A data 0 SPDIF output SPDIF input USB B12 A12 GPIO-09 E-GPIO_SDI/TBA GPIO-08 E-GPIO_SDO/TBA Ethernet GPIO-10 E-GPIO_CLK/TBA C12 Ethernet T13 GPIO-01 Free Free iPod NDETECT GPIO-15 GPIO-19 SPI Free GPIO-17 E-GPIO_NCS/TBA GPIO-11 GPIO-14 I2C SDA I2C SCL GPIO-13 SPI_REQ Factory Reset IR input GPIO-06 GPIO-04 GPIO-05 Ethernet iPod Access Power GPIO-03 Ethernet K18 J17 D13 D14 D15 B16 C15 H18 D12 T3 U2 J1 K1 K2 R12 Free GPIO-00 R14 Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit. This allows for easy cross-reference to the DM860A or DM870A data sheet information. SMSC CX Module 27 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 8.2.3 GPIO Assignments GPIO Assignments for J3 64-pin Low Density Connector GPIO PIN Name 00 01 03 04 05 06 08 09 10 11 13 14 15 17 19 MIICRS MIICOL MIITXCLK PDOUT0 VCO0 PDOUT1 SSMD4 SSMD5 SSMD6 SSMD7 AV3CTRL0 AV3CTRL1 NWAIT NCS3 NCS2 PIN Number 61 62 55 47 49 45 50 48 56 37 41 39 15 33 17 Function Free Free iPOD Access Power Factory Reset IR Input Host NIREQ E_GPIO_SDO/TBA E_GPIO_SDI/TBA E_GPIO_CLK/TBA E_GPIO_NCS/TBA I2C_SCL I2C_SDA Free Free IPOD NDETECT Note: Not all 20 GPIO signals are brought out to J3 64-pin low density connector. For the CX870-3K, GPIOs 00, 01 and 03 are not brought out to J3 64-pin low density connector. J3 pin numbers 61, 62 and 55 are not connected to any signal in the CX870-3K module. 9 Application Guidelines 9.1 Power Supply sequencing and Reset Timing There are strict power sequencing and reset timing requirements. Power up the I/O voltage (3.3V) first and hold NRESET_MOD low. The core voltage (1.2V) must never be higher than (I/O voltage +0.5 V). The core voltage (1.2V) must be within the specified core voltage limits less than 300ms after the I/O voltage
(3.3V) reaches the specified I/O voltage limits. Throughout the power down process, the 3.3V supply must maintain a higher voltage than the 1.2V supply, until both have reached ground potential. To assure a proper IC reset, the power supplies must be present for a minimum time of 2ms before NRESET_MOD is de-asserted. Please see the power and reset timing figure in Section 9.1.1 below. About 1.9V, the arrival of 1.9V supply should lag behind the arrival of the 3.3V. The delay between the 1.9V and the 3.3V is not critical. Typical delay is approximately 10ms, for example using 10kohm resistor and 0.1uF capacitor on the enable pin of a 1.9V dc-to-dc converter. SMSC CX Module 28 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 9.1.1 Power up, Reset and Power Down Timing Power Up Power Down Voltage
+3.3V
+1.2V 0V
< 300ms NRESET_MOD
>= 2ms Time 9.2 RF Considerations Note that overall system, RF and WiFi performance is significantly affected by the product design, environment and the application. It is the responsibility of the product designer to ensure proper system level shielding (if required) and to verify performance and fitness for the given product features and applications. The WiFi performance will be affected by the RF environment surrounding the CX module. Please ensure that the CX module is positioned in a quiet RF environment, as far away as possible from high frequency clock signals and any other sources of RF energy. Also, make sure the antenna is not shielded by any metal objects, for example loudspeakers or other metal parts. Please make sure that the power supplies, in particular the +1.9V supply, are quiet and free from noise. SMSC recommends that systems implementing AirPlay should use a module configuration that includes on-module shielding, as well as paying particular attention to system configuration and shielding. In particular, SMSC is recommending the use of the Bottom Shield versions of the modules, which allows greater freedom in antenna positioning. Also, please see the SMSC Application Note:
SMSCAppNote - CX870_Antenna_Placement_V1_4.pdf regarding antenna positioning guidelines. Please see below picture for the recommended keep out area and cable routing for the antennas. SMSC CX Module 29 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 10 Revision Control Revision V2.8
(093012) Date / Author Sept 30, 2012
/ SHs V2.8
(092412) Sept 24, 2012
/ SHs V2.8
(090912) Sept 9, 2012 /
SHs Details of Change Updated Section 4 Ordering Guide with 2 new rows for CX870-3LB & CX870-3MB and moved the row for CX870-3KB to be with them. Updated cover page with new Microchip logo;
removed SMSC logo from header; removed SMSC logo & address from legal text (page 2);
added info about Microchip to legal text;
updated to 2012. Updated filename to CX_Module_DS_Rev2-
8_MM-DD-YY.pdf. Removed CX860 from Section 7.4 Module Weight. Updated left side of footer to SMSC CX Module. Updated title of Section 7.1.1 to Top & Bottom View of CX Module with Bottom Shield. Updated title of Section 7.2.1 to Side View of CX Module with Bottom Shield except CX870-
3JB. In Sections 3.1, 3.2, 3.2.1 & 3.2.2, updated occurrences of CX870 to CX Module. Updated Section 4 Ordering Guide to remove rows for CX870-3DB and CX870-3DBS, and add a row for CX870-3KB. Removed I2C box, arrow & label in Section 2 Block Diagram. Updated Section 2 Block Diagram to show obscured black lines leading out from LCD &
SSM blocks. In Section 2 Block Diagram changed DM860A or DM870A to DM870A or DM875 In Section 1 Introduction, changed DM860A and DM870A to DM870A and DM875 In Section 4 Ordering Guide, added a Status column and status code key. In Section 4 Ordering Guide, added row for CX875-3PB. In Section 4 Ordering Guide, changed SMSC ICs heading to SMSC ICs. In Section 6.0.1 Antenna Considerations, replaced text list with a new table. Added a new section 6.0.2 CX Power Settings Used For Modular Approval. In Section 6 Regulatory Compliance and Quality, updated the Compliance entry for New Zealand / Australia for Radio Regulations from CE to AZ/NZS:4268 In Section 9.2 RF Considerations, changed the application note file path from App Note Antenna Placement recommendation CX870 modules rev1.1.pdf to SMSCAppNote -
CX870_Antenna_Placement_V1_4.pdf Reason for Change New SKUs available. Microchip purchased SMSC. Data covers all CX modules. No CX860 module available. Data sheet is for all CX modules. Drawings are for all CX modules. Drawings are for all CX modules. Pictures are for all CX modules. Updated to show actual status. Correction. Correction. CX module uses DM870A and DM875. CX module uses DM870A and DM875. To show current availability status of each module version. To give details of newly available module version. Correction. Updated information and in a clearer format. To provide more details about CX module power settings. Updated information. Provide most up to date Application Note file. SMSC CX Module 30 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author V2.7
(061312) June 13, 2012 / SHs V2.6
(050812) May 8, 2012 /
SHs V2.5
(042212) April 22, 2012
/ SHs V2.4
(032312) March 23, 2012 / SHs V2.4
(031712) March 17, 2012 / SHs Details of Change In Section 9.2 RF Considerations, added note &
picture regarding recommended keep out area and cable routing for antennas. In Notes of Section 8.2.1 Pin Descriptions, added text regarding schematics being compressed into zip files to Notes 4, 5 & 11. In Section 4 Ordering Guide, made rows for CX870-3B, 3H, 3I, 3J shaded. Removed entries in 8MByte NOR column for modules 3A, 3B, 3D, 3DS in Section 4 Ordering Guide Updated title of Section 7.2.1 Side View of CX870 Module with Bottom Shield to include except CX870-3JB Added Section 7.2.2 Side View of CX870 Module with Bottom Shield part number CX870-
3JB only Added IC PIN entry for MIICRS in J3 Low Density Connector table in Section 8.2.2 Connector PIN Assignments. Changed "MMIICRS" to "MIICRS" in Section 8.2.3 GPIO Assignments. Changed "MMIICRS" to "MIICRS" in J3 Low Density Connector table in Section 8.2.2 Connector PIN Assignments. Changed "MMIICRS" to "MIICRS" in GPIO table in Section 8.2.1 Pin Descriptions. Added important note text to Tx Power row in Section 5.3 WiFi Specification. Removed the m from "+/-1dBm" in the Tx Power row in Section 5.3 WiFi Specification. In Section 5.3 WiFi Specifications, updated Transmission Speed entry In Section 4 Ordering Guide, changed all occurrences of DM870 to DM870A & DM860 to DM860A In Section 2 Block Diagram, changed all occurrences of DM870 to DM870A & DM860 to DM860A In Section 1 Introduction, changed all occurrences of DM870 to DM870A & DM860 to DM860A In Section 8.2.1 Pin Descriptions, changed all occurrences of DM870 to DM870A In the Notes for Section 8.2.1 Pin Descriptions, changed dat_DM870_16_datasheet.pdf to DM870A DS rev. 1.3_12-15-11.pdf Changed all occurrences of DM870 to DM870A throughout the datasheet. Updated J1, J2 & J3 tables in Section 8.2.2 Connector PIN Assignments, changing DM870 to DM870A. Reason for Change Provide information about keep out areas and cable routing. Provide further information about schematic files. All new designs should use modules with a bottom shield, so modules without a bottom shield are now marked as "NOT TO BE USED FOR NEW/STANDARD MP DESIGNS" by shading the rows in the Ordering Guide table for those modules with no bottom shield. Correction. Reflect addition of separate section (7.2.2) for the CX870-3JB module. CX870-3JB has thinner bottom shield than other modules. CX module uses DM870A. Correction. Correction. Correction. To indicate which modules the Tx Power specifications relate to. Correction. Add missing 2Mbps speed. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. CX module uses DM870A. SMSC CX Module 31 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author V2.4
(031212) March 12, 2012 / SHs V2.4
(031012) March 10, 2012 / SHs V2.3
(112011) V2.2
(110811) V2.1
(100711) November 20, 2011 / SHs November 8, 2011 / SHs October 7, 2011 / SHs V2.0
(100211) October 2, 2011 / SHs Details of Change Changed "WiFi (on-module PCB diversity)"
column heading to "Internal PCB Diversity Antennas" in Section 4 Ordering Guide Added FCC to North America in Frequency Band entry in Section 5.3 WiFi Specification Updated TX EVM entry in Section 5.3 WiFi Specifications Updated Rx Sensitivity entry in Section 5.3 WiFi Specifications Updated Tx Power entry in Section 5.3 WiFi Specifications Added Section 3.6 Production Module with Bottom shield (Part Numbers with a "B" after the configuration letter) Added Section 3.6.1 Including J3 Low Density 64-pin connector - Bottom View Added Section 3.6.2 Including J2 High Density 120-pin connector - Bottom View Updated Section 4 Ordering Guide & Section 4.1 Part Number Syntax drawing with bottom shield versions Added another note to Section 8.2.3 GPIO Assignments Updated TX Power row in Section 5.3 WiFi Specification (CX870 only) Added Section 7.1.1 Top & Bottom View of CX870 Module with Bottom Shield Added Section 7.2.1 Side View of CX870 Module with Bottom Shield Added a note to Section 7.3 3D View of CX870 Module Added additional text to Section 9.2 RF Considerations Added CX870-3DS option to Section 4 Ordering Guide Added CX870-3K option to Section 4 Ordering Guide. Updated title of Section 6.1 from 1 RoHS to RoHS. In Section 10 Revision Control table, updated an entry for V2.0 b in the Reason for Change column from RTV to RTC Removed Preliminary Datasheet from the footer. Removed the word Preliminary from the title page. Updated Section 5.3 WiFi Specification TX Power entry for 802.11g Updated Section 6.0.1 Antenna Considerations with updated module numbering scheme Updated Section 6.7 Module Quality with new Defect Rate Reason for Change Improve clarity of meaning. Specify North American WiFi regulatory certification body. Update values to better reflect actual performance. Update values to better reflect actual performance. Show test conditions. Show module versions with bottom shield. Show bottom shield. Show bottom shield. Bottom shield versions added to table and Syntax drawing. Document missing GPIOs for CX870-3K. Show improved tolerances for TX power. Show drawings of module with Bottom Shield. Show drawings of module with Bottom Shield. To indicate availability of digital copy of 3D view of module. Providing further recommendations regarding the use of bottom shield versions and to indicate the availability of a pdf about antenna positioning guidelines. To indicate soldered shield version. Added -3K option. Correcting typo. Correcting typo. CX module is in production, so the datasheet is no longer preliminary. CX module is in production, so the datasheet is no longer preliminary. Correspond to actual production test limits. Revert to original module numbering scheme. Data is now available. SMSC CX Module 32 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author V2.0
(092611) Sept. 26, 2011 / SHs V2.0 c Sept. 14, 2011 / SHs Details of Change Updated Section 4.1 Part Number Syntax with removal of Antenna Configuration number and Note Updated Section 10 Revision Control with new Reason for Change column Change from BridgeCo logos and disclaimer text to SMSC logos and disclaimer text Updated location of red boxes in Section 3.2.1 CX870 Bottom View with 64-pin Low density connector Updated location of red boxes in Section 3.2.2 CX870 Bottom View with 120-pin Media connector Moved Section 5.3 WiFi Specification on to one page Updated Customer Portal information in Section 6 Regulatory Compliance and Quality Reverted Antenna Considerations back to Section 6.0.1; subsequently all subsections in Section 6 reverted back to original numbering Updated Notes 11 & 12 in Section 8.2.1 Pin Descriptions with updated Customer Portal information Updated Table of Contents Updated font styling of Table of Contents Update Section 2 Block Diagram : moved RJ45+Transformer & USB Type A boxes inside the drawing boundary Updated Section 5.3 WiFi Specification (CX870 only) TX Power Description entry Updated Section 5.3 WiFi Specification (CX870 only) Rx Sensitivity Description entry Updated Section 5.3 WiFi Specification (CX870 only) : add a Note underneath the table Updated Section 4 Ordering Guide : changed CX870-3D row Two Ant entry from (X)* to X Updated Section 4 Ordering Guide : removed the two blank rows Reason for Change Revert to original part numbering scheme. Corporate standard. Corporate standard. Improve alignment of red box to photo. Improve alignment of red box to photo. Improve readability. Easier to access URL directly. Decided to keep original part numbering scheme to avoid unnecessary paper work and the need to redo certifications. Easier to access URL directly. Keep TOC aligned with actual content. Easier to read. Improve accuracy of drawing. Align data with test limits. Align data with test limits. Clarification of the possible effect of changing the TX Power setting. Change to match final CX870-3D configuration. Improve readability. SMSC CX Module 33 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Revision V2.0 b Date / Author Sept. 10, 2011 / SHs V2.0 a V2.0 August 22, 2011 / SHs August 12, 2011 / SHs V1.9 c August 2, 2011 / SHs V1.9 b July 28, 2011
/ SHs Details of Change Updated the Description for pin NCS3 in Section 8.2.1 Pin Descriptions Updated Section 4 Ordering Guide : added gray background to CX870-3F & CX870-3G Updated Section 4 Ordering Guide : removed the 2 from A, H, I & J version Part Numbers Updated Section 4 Ordering Guide : split Ext. Diversity Antennas column into two, added two sub-columns One Ant. & Two Ant., moved Xs to correspond with correct sub-column Updated Section 4 Ordering Guide : CX870-3D :
removed X from WiFi column Updated Section 4 Ordering Guide : updated +
Note text Updated Section 4 Ordering Guide : moved the
+ from Part Numbers column to Ext. Diversity Antennas column Updated Section 4 Ordering Guide : removed #
Note completely Updated Section 4.1 Part Number Syntax :
Updated graphic Updated Section 4.1 Part Number Syntax :
Updated Note text Updated text in Section 8.1 WLAN UFL Antenna Connector Removed RTC elements from Section 2 Block Diagram Updated the Description for pin 3V3RTC in Section 8.2.1 Pin Descriptions Added Section 3.5 Example Production Module Showing Soldered RF Shield Updated Note Section 4.1 Part number syntax Updated all Section 3 Board Pictures to new versions + inserted new Sections 3.2.1 & 3.2.2 which show two different bottom views Updated Key Features on Title page:
removed (optional) from WiFi-certified 802.11b/g entry Updated Antenna Configuration entry in Section 4.1 Part number syntax Updated Section 4.1 Part number syntax o Updated graphic o Added a Note Changed intro text in Section 3 Board Pictures Reason for Change Update to align with actual use. Internal antenna versions are not available until performance issues are resolved. Decided to keep original part numbering scheme to avoid unnecessary paper work and the need to redo certifications. Show the number of external antenna connections. CX870-3D is not configured for internal antenna. Explained about one or two external antenna options. Proper link for "+" Note. Content now covered by "+" Note Explain antenna configuration field Explain about one or two antenna configuration. Remove references to part numbering scheme which includes the number of antennas, and repeat advice to use two external antennas. Support for RTC is removed. Support for RTC is removed. Photo shows that RF shield is soldered, needed for Japan Telec certification. Highlighted that CX870-3D does not follow the new part numbering scheme. This Note was subsequently deleted, so this is not relevant any more. Improve accuracy of data sheet photos. Updated Section 4 Ordering Guide o Changed CX870-3B1 to CX870-
3B o Updated the text for + note o Added a note to CX870-3B Ext. Diversity Antenna column o Added a new # note SMSC CX Module 34 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author Details of Change Reason for Change V1.9 a July 25, 2011
/ SHs Added Section 6.0.1 Antenna Considerations Inserted new photo for Section 3.1 Top View of CX870 Inserted new photo for Section 3.2 Bottom View of CX870 Added new Section 3.3 Production Module with Top & RF shields Added new Section 3.4 Production Module with 64-pin Connector Option Updated Section 4 Ordering Guide o Added gray background to CX870-3D o Changed CX870-3A to CX870-
o Changed CX870-3B to CX870-
o Changed CX870-3H to CX870-
3B1 o Changed CX870-3I to CX870-
o Changed CX870-3J to CX870-
3I2 3A2 3H2 3J2 o Added a Note to the Part Number title Updated Section 8.1 WLAN UFL Antenna Connector with new text Updated Section 5.3 WiFi Specification TX EVM entry to
-9dB@6MHz Updated Section 6 Regulatory Compliance
& Quality with Module Versions Passed for Radio Regulations entries Replaced the Note in Section 6 to be main body text and updated the text. Added new Section 4.1 Part number syntax Updated module weight to 20g Update section 8.1 WLAN UFL Antenna Connector Deleted section 8.1.1 Coaxial antenna connector dimensions Updated the acceptable surface-mount receptacle parts in Section 8.1 WLAN UFL Antenna Connector Added Appendix 1: Certification Notices Updated Module Quality Defect Rate field entry Updated Board Dimensions & Weight drawings Updated the Electrical Specifications table Added another Note to the Pin Descriptions section Updated Note 8 in Pin Descriptions table Re-imported Board Dimensions &
Weight drawings Updated Board Pictures images Updated board photo on Cover page V1.8 a July 10, 2011
/ SHs V1.8 July 5, 2011 /
SHs V1.7 c May 13, 2011
/ SHs V1.7 b May 11, 2011
/ SHs SMSC CX Module 35 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author Details of Change Reason for Change Updated the Feature list on Cover page Updated J1, J2 & J3 Connector PIN Assignments tables: removed Power column & re-organised columns Changed Application Notes title to Application Guidelines Updated Copyright date to 2011 Updated Table of Contents font styling Re-imported Block Diagram as a wmf file Updated Power up, Reset & Power down Timing figure Updated Pin Descriptions table Re-organised text in Power Supply sequencing & Reset Timing Re-imported J2 & J3 Connector PIN Assignment tables Added note to Module Weight section Updated the Ordering Guide Part Numbers & added new J version Added new text to the Board Pictures section Updated all Mechanical Drawings and added & removed Notes Updated the J3 Low Density Connector table Updated the GPIO Assignment table Added new Power Supply & Timing figure Updated the text in the Power Supply sequencing and Reset Timing section Updated the Key Connections table Updated Key Connections section title to Pin Descriptions Updated Detailed Connector PIN Descriptions section title to Connector PIN Assignments Updated J2 Media Connector table Updated J3 Low Density Connector table Update GPIO Assignments section and table Deleted warning note in Board Dimensions and Weights section Updated J3-Low density connector pin description table Updated GPIO Assignments table Entirely updated the Ordering Guide Added a Note to the Ordering Guide Updated the subsection titles for the Board Pictures section Updated the Block Diagram changed WiFi Antenna to Ext. Antenna Added Note to Board Dimensions and Weight section Updated the Ordering Guide removed Mfg column and consolidated into one table V1.7 a May 6, 2011 /
SHs V1.7 May 4, 2011 /
SHs V1.6 d V1.6 c V1.6 b V1.6 March 3, 2011 / SHs February 23, 2011 / SHs February 11, 2011 / SHs V1.5 b V1.5 a January 27, 2011 / SHs January 24, 2011 / SHs SMSC CX Module February 24, 2011 / SHs Updated all mechanical drawings in Board Dimensions and Weights section 36 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Revision Date / Author Details of Change Reason for Change V1.5 January 22, 2011 / SHs V1.4 b V1.4 January 11, 2011 / SHs January 3, 2011 / SHs V1.3 December 23, 2010 / SHs V1.2 V1.1 December 19, 2010 / SHs December 13, 2010 / SHs Updated the Header to reflect Preliminary nature of datasheet Updated the datasheet to be a Preliminary Datasheet Added new feature to Summary on Front Page Updated J3 - Low Density Connector table Updated GPIO Assignments table Added note to Board Dimensions &
Weight Side Views of CX870 module section Updated text in Application Notes Power Supply Sequencing & Reset Timing section Updated Block Diagram Updated text in Connectors &
Connections WLAN UFL Antenna Connector section Updated the Application Notes, RF Considerations section Updated the module photo on the Title page Updated the Application Notes, RF Considerations section Updated Ordering Guide Added Notes to Ordering Guide Updated Block Diagram Updated J3 Low Density Connector table Updated Electrical Specifications table Added Power Consumption data to Electrical Specifications table Updated the Board Dimensions and Weight images Updated the GPIO Assignments table Added another Application Note Added titles to Application Notes Inserted CX860 and CX870 Module Weights Updated module image on Front Page Added the Ordering Guide. Updated the Block Diagram. Updated the Electrical Specifications table Updated the Absolute Maximum Ratings table Updated the Notes for Regulatory Compliance and Quality section Updated Key Connections table Updated J2 Media Connector table Updated J3 Low Density Connector table Updated GPIO Assignments table Added Board Pictures Replaced Mechanical Drawings in Board Dimensions and Weight section SMSC CX Module 37 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Revision V1.0 Date / Author October 18, 2010 / SHs Details of Change Initial Version Reason for Change SMSC CX Module 38 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet 11 Appendix 1: Certification Notices Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Labeling requirements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. This device is intended for OEM integrators only. Please see the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved access point. Information To Be Supplied to the End User by the OEM or Integrator The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system incorporating an adapter in compliance with local regulations. Host system must be labeled with "Contains FCC ID: ZQO-CX870-3X, FCC ID displayed on the label. The label text should be updated according to the table shown in Ordering Guide section of this document. The proper letter shown in Ordering Guide Part Number column should be substituted for X. For example, for the CX870-3B module, the label text should be Contains FCC ID: ZQO-CX870-3B. Antenna List No. Manufacturer 1 2 3 4 SKYTECH UNION INC. LEAD JUMP Development LTD. Tyco Electronics Tyco Electronics Peak Gain Model No. 1.28 dBi for 2.4GHz 1-888-241-00 1-888-241-00 0.84 dBi for 2.4GHz 2174241-2 (Length of cable: 390mm) 2.67 dBi for 2.4GHz 2174241-1 (Length of cable: 330mm) 2.19 dBi for 2.4GHz SMSC CX Module 39 Revision 2.8 (09-30-12) JukeBlox Networked Media Modules CX Series Datasheet Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). This device has been certified for use in Canada. Status of the listing in the Industry Canadas REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Canada, avis d'Industry Canada (IC) Cet appareil numrique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence et
(2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil Dell est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil Dell de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (les antennes se situent moins de 20 cm du corps d'une personne). Ce priphrique est homologu pour l'utilisation au Canada. Pour consulter l'entre correspondant lappareil dans la liste d'quipement radio (REL - Radio Equipment List) d'Industry Canada rendez-vous sur:
Pour des informations supplmentaires concernant l'exposition aux RF au Canada rendez-vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html SMSC CX Module 40 Revision 2.8 (09-30-12)
1 2 | (CX870-3LB) Inpho | Internal Photos | 777.96 KiB | January 15 2013 |
Report No.: 12C249R-RFUSP42V01
(3) EUT Photo
(4) EUT Photo No action Page : 2 of 9 Report No.: 12C249R-RFUSP42V01
(5) EUT Photo
(6) EUT Photo Page : 3 of 9 Report No.: 12C249R-RFUSP42V01
(7) EUT Photo
(8) EUT Photo Page : 4 of 9
(9) EUT Photo Report No.: 12C249R-RFUSP42V01
(10) EUT Photo Page : 5 of 9
(11) EUT Photo (Antenna: Tyco Electronics / 2174241-1) Report No.: 12C249R-RFUSP42V01
(12) EUT Photo (Antenna: Tyco Electronics / 2174241-1) Page : 6 of 9
(13) EUT Photo (Antenna: Tyco Electronics / 2174241-1) Report No.: 12C249R-RFUSP42V01
(14) EUT Photo (Antenna: Tyco Electronics / 2174241-2) Page : 7 of 9
(15) EUT Photo (Antenna: Tyco Electronics / 2174241-2) Report No.: 12C249R-RFUSP42V01
(16) EUT Photo (Antenna: Tyco Electronics / 2174241-2) Page : 8 of 9 Report No.: 12C249R-RFUSP42V01
(17) EUT Photo Page : 9 of 9
1 2 | (CX870-3LB) Expho | External Photos | 157.99 KiB | January 15 2013 |
Attachment 2 : EUT Detailed Photographs
(1) EUT Photo Report No.: 12C249R-RFUSP42V01
(2) EUT Photo Page : 1 of 9
1 2 | (CX870-3LB) LabelLoc | ID Label/Location Info | 97.41 KiB |
LITE-ON TECHNOLOGY CORP. FCC ID.: PPQ-CX8703LB FCC ID Label 4F, 90, Chien 1 Road, Chung Ho, Taipei Hsien 235, Taiwan, R.O.C.Tel : 886-2-2222-6181
1 2 | (CX870-3LB) Labelsmpl | ID Label/Location Info | 56.55 KiB |
LITE-ON TECHNOLOGY CORP. FCC ID.: PPQ-CX8703LB The FCC ID and will be placed on the equipment as shown in the photograph below. 4F, 90, Chien 1 Road, Chung Ho, Taipei Hsien 235, Taiwan, R.O.C.Tel : 886-2-2222-6181
1 2 | (CX870-3LB) ATTESTATION | Cover Letter(s) | 10.27 KiB | January 15 2013 |
LITE-ON TECHNOLOGY CORP. FCC ID.: PPQ-CX8703LB Dec. 28., 2012 Federal Communications Commission Authorization and Evaluation Division ATTESTATION FCC ID: PPQ-CX8703LB Product: JukeBlox Networked Media Module Model: CX870-3LB We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely,
TC WU / Director LITE-ON TECHNOLOGY CORP. 4F, 90, Chien 1 Road, Chung Ho, Taipei Hsien 235, Taiwan, R.O.C.Tel : 886-2-2222-6181
1 2 | (CX870-3LB) Class II Change 20130115 | Cover Letter(s) | 10.83 KiB | January 15 2013 |
LITE-ON TECHNOLOGY CORP. Declaration of Product Modifications This is to request a Class II permissive change for FCC ID: PPQ-CX8703LB, originally granted on 12/24/2012. The major change filed under this application is:
Change #1: Addition two new antennas, antenna type and antenna gain is different with the original application. Antenna type: Inverted-F Antenna Tyco Electronics / 2174241-2 antenna gain: 2.67dBi, Tyco Electronics / 2174241-1 antenna gain: 2.19dBi. Sincerely,
TC WU / Director LITE-ON TECHNOLOGY CORP.3 4F, 90, Chien 1 Road, Chung Ho, Taipei Hsien 235, Taiwan, R.O.C.
1 2 | (CX870-3LB) Confidentiality | Cover Letter(s) | 82.51 KiB | January 15 2013 |
LITE-ON TECHNOLOGY CORP. FCC ID.: PPQ-CX8703LB Dec. 28., 2012 LITE-ON TECHNOLOGY CORP. 4F, 90, Chien 1 Road, Chung Ho, Taipei Hsien 235, Taiwan, R.O.C. Tel : 886-2-2222-6181 Fax: 886-2-2226-6749 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:
Schematics: (CX870-3LB) Schem Block Diagram: (CX870-3LB) BlkDia Operational Description: (CX870-3LB) OPDes The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely,
TC WU / Director LITE-ON TECHNOLOGY CORP. 4F, 90, Chien 1 Road, Chung Ho, Taipei Hsien 235, Taiwan, R.O.C. Tel : 886-2-2222-6181
1 2 | (CX870-3LB) Declaration of authorization | Cover Letter(s) | 65.45 KiB | January 15 2013 |
LITE-ON TECHNOLOGY CORP. RF_160, Issue 02 LITE-ON TECHNOLOGY CORP. 4F, 90 ,Chien 1 Road,Chung-Ho,Taipei Hsien 235,Taiwan,R.O.C. Taipei . Taiwan.. Declaration of Authorization We Name:
Address:
City:
Country:
Declare that:
Name Representative of agent:
Agent Company name:
Address:
City:
Country is authorized to apply for Certification of the following product(s):
Product description: JukeBlox Networked Media Module Type designation: CX870-3LB PICO Module Gene Chang (1) QuieTek Corp. Fl.2, No.345, Xin-hu 2nd Rd., Nei-hu District Taipei Taiwan Trademark:
on our behalf. Date:
City:
Name:
Function:
2012/12/28.. Taipei .. TC WU .. (2) Director Signature:
Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
1 2 | (CX870-3LB) FCC Modular Approval Request- 20121221v2 | Cover Letter(s) | 654.05 KiB | December 24 2012 |
Modular Approval Request FCC (per FCC 15.212) Items to be covered 1. The modular transmitter must have its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provi ded) t o ensure t hat the module will co mply w ith Part 15 requi rements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its own power supply regulation. 4. The modular transmitter must co mply wit h t he an tenna r equirements of Sect ion 15.203 and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable)..
5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. 6. The modular transmitter must be l abeled with its own FC C ID number, and, i f the FCC ID i s not visible when t he module is installed inside another device, then t he outside of t he device into which the module is installed must also di splay a label referring to the enclosed module. Thi s exterior label can use wordi ng such as t he following: Contains Transmitter Module FCC ID: XYZMODEL1 or C ontains FCC ID: XYZMODEL1 . An y si milar wo rding th at ex presses th e sa me meaning may be us ed. The Grantee may either provide such a label, an exa mple of which must be included in the application for equi pment authorization, or, m ust provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of t hese inst ructions must be i ncluded i n t he appli cation for equipment authorization. 7. The modular transmitter must co mply w ith any speci fic rul e or operati ng requirements a pplicable to the transmitter and t he manufacturer must provi de adequate instructions along with the module to expl ain any such requi rements. A copy of t hese i nstructions must be i ncluded i n t he ap plication for equi pment authorization. For exam ple, t here are very st rict operat ional and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case t here are separate fi eld strength level and timing requirements. Compliance with these requirements must be assured. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. FCC ID: PPQ-CX8703LB Answer from applicant Please review external photos. The buffered integrated in chip 6201C.
(Chip_U7). Not have power regulation. Please review external photos or test report. Please refer to the user manual instructions (page 39). The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a Limited Modular Approval (LMA). Name and surname of applicant (or authorized representative): TC WU Date: Nov. 21, 2012 Signature:
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-01-15 | 2412 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 2012-12-24 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2013-01-15
|
||||
1 2 |
2012-12-24
|
|||||
1 2 | Applicant's complete, legal business name |
LITE-ON Technology Corp.
|
||||
1 2 | FCC Registration Number (FRN) |
0014765044
|
||||
1 2 | Physical Address |
Bldg. C, 90, Chien 1 Rd., Chung-Ho
|
||||
1 2 |
New Taipei City,
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
PPQ
|
||||
1 2 | Equipment Product Code |
CX8703LB
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
T******** W********
|
||||
1 2 | Title |
Deputy Director(R & D Division)
|
||||
1 2 | Telephone Number |
86-22******** Extension:
|
||||
1 2 | Fax Number |
86-22********
|
||||
1 2 |
t******@liteon.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Quietek Corporation
|
||||
1 2 |
QuieTek Corporation
|
|||||
1 2 | Name |
S**** C****
|
||||
1 2 | Physical Address |
No. 5-22, Rueishu Keng, Linkou Dist.
|
||||
1 2 |
New Taipei City, 24451
|
|||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
s******@quietek.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | JukeBlox Networked Media Module | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Limited Single Modular Approval | ||||
1 2 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Limited Single Modular Approval. Power Output listed is conducted. This device is granted for use in Mobile only configurations in which the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filling cannot be met installation of this device into specific final products may require the submission of a permissive. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure complacence. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. Class II Permissive Change for adding two more Antennas as documented in this filing. | ||||
1 2 | Limited Single Modular Approval. Power Output listed is conducted. This device is granted for use in Mobile only configurations in which the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Installation of this device into specific final products may require the submission of a Class II permissive change or new submission as appropriate. Approval is limited to Grantee or OEM installation only. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure complacence. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
DEKRA Testing and Certification Co., Ltd.
|
||||
1 2 | Name |
S**** H********
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
s******@quietek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1745000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1745000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC