FCC ID: PPQ-WPX8988 Wireless Access Point

298mm m m 9 0 2 plug the other end into the LAN 1(PoE) port. If using power adapter (optional), insert the power adapter plug into the AC power outlet and the other end into the DC IN port of AP Step 2: Connect to the network If using PoE, make sure the PoE switch or injector is connected to your LAN network with Internet access. If using power adapter, plug one end of an Ethernet cable into LAN 1(PoE) port and the other end to an Ethernet port of your Switch or Router on the network. Step 3: Check the LED status Wait for a few minutes until the Power LED turns solid Blue and LAN1 LED turns Blue or Amber. The AP is then online for operation. Troubleshooting The following table shows the status of the APs LED indicators. WPX8988 LED Description PWR LAN1 LAN2 2.4G 5G Radio 3 Blue*

Amber Blue*

Amber Blue*

Amber Blue*

On: Power is ON and ready for operation Off: Power is OFF On: CPU or System Failed Blinking: System Initial or reset (Software self-testing and loading) On: Good Link at 2.5Gbps Blinking: Receiving/Transmitting data at 2.5Gbps from LAN port On: Good Link at 100/1000Mbps Blinking: Receiving/Transmitting data at 100/1000Mbps from LAN Port On: Good link at 2.5Gbps Blinking: receiving/transmitting data at 2.5Gbps from LAN port On: Good Link at 100/1000Mbps Blinking: Receiving/Transmitting data at 100/1000Mbps from LAN Port On: Good link on 2.4GHz, off: radio disabled or off Blinking: Receiving/Transmitting data from wireless LAN Blue*

On: Good link on 5GHz, off: radio disable or off Blinking: Receiving/Transmitting data from wireless LAN Amber Reserved Amber Reserved Blue*

Amber On: Good link on Sniffer, off: radio disable or off Blinking: receiving data from sniffer On: Good link on BT, off: radio disable or off Blinking: receiving/transmitting data from BT

*Optional: Blue or Green If the AP fails to connect to the cloud server, please check the following:

1. Ensure that the Ethernet cable is plugged into the LAN 1(PoE) port, and LAN1 2. LED is NOT OFF. If the AP fails to get a valid IP address from the local DHCP server, ensure that the DHCP service is ENABLED on your router. 3. Ensure there is Internet connectivity on the local LAN network to which the AP is connected Getting AP online Step 1: Power up If using PoE, plug one end of the Ethernet cable into the PoE switch or injector and 149mm m m 5

. 4 0 1

():128g

():CMYK

():NO

():298x209mm

():+-1mm WI-RDC-016 Dereck 2021-09-13 for WPX8988 QSG 5150000563M7 A0

298mm m m 9 0 2 with Internet access. If using power adapter, plug one end of an Ethernet cable into LAN 1(PoE) port and the other end to an Ethernet port of your Switch or Router on the network. Step 3: Check the LED status Wait for a few minutes until the Power LED turns solid Blue and LAN1 LED turns Blue or Amber. The AP is then online for operation. Troubleshooting The following table shows the status of the APs LED indicators. WPX8988-1 LED Description Blue*

Amber Blue*

Amber Blue*

Amber Blue*

On: Power is ON and ready for operation Off: Power is OFF On: CPU or System Failed Blinking: System Initial or reset (Software self-testing and loading) On: Good Link at 2.5Gbps Blinking: Receiving/Transmitting data at 2.5Gbps from LAN port On: Good Link at 100/1000Mbps Blinking: Receiving/Transmitting data at 100/1000Mbps from LAN Port On: Good link at 2.5Gbps Blinking: receiving/transmitting data at 2.5Gbps from LAN port On: Good Link at 100/1000Mbps Blinking: Receiving/Transmitting data at 100/1000Mbps from LAN Port On: Good link on 2.4GHz, off: radio disabled or off Blinking: Receiving/Transmitting data from wireless LAN Amber Reserved Blue*

On: Good link on 5GHz, off: radio disable or off Blinking: Receiving/Transmitting data from wireless LAN PWR LAN1 LAN2 2.4G 5G Amber Reserved

*Optional: Blue or Green If the AP fails to connect to the cloud server, please check the following:

1. Ensure that the Ethernet cable is plugged into the LAN 1(PoE) port, and LAN1 2. LED is NOT OFF. If the AP fails to get a valid IP address from the local DHCP server, ensure that the DHCP service is ENABLED on your router. 3. Ensure there is Internet connectivity on the local LAN network to which the AP is connected Getting AP online Step 1: Power up If using PoE, plug one end of the Ethernet cable into the PoE switch or injector and plug the other end into the LAN 1(PoE) port. If using power adapter (optional), insert the power adapter plug into the AC power outlet and the other end into the DC IN port of AP Step 2: Connect to the network If using PoE, make sure the PoE switch or injector is connected to your LAN network 149mm m m 5

. 4 0 1

():128g

():CMYK

():NO

():298x209mm

():+-1mm WI-RDC-016 Dereck 2021-09-13 for WPX8988 QSG 5150000562M7 A0

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This device is restricted to indoor use. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm between the radiator & your body. 5 4 0 1 400g P WI-RDC-016 FCC 515*

A0 Luby 2021-11-19

2.85 36. 500.20 69.00.20 Product type: Wireless Access Point Model number: WPX8988 FCC ID: PPQ-WPX8988 CONTAINS FCC ID:PPQ-WM6321 MAC: XX:XX:XX:XX:XX:X0 Fe SN: YYWWXXXXX 2.85 36. 500.20 69.05 t 0). 20 Product type: Wireless Access Point Model number: WPX8988 FCC ID: PPQ-WPX8988 MAC: XX:XX:XX:XX:XX:X fl 0 FE SN: YYWWXXXXX 2.85 36.500. 20 ns 69.500. 20 2.8) LI POEVVIt Product type: Wireless Access Point Model number: WAP-1 FCC ID: PPQ-WPX8988 FC CONTAINS FCC ID:PPQ-WM6321 MAC: DOB214XXXXXX = SN: LCWAPXXXXXXXX

Confidentiality Request Letter Date: November 30, 2021 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: PPQ-WPX8988 To whom it may concern:

Short-term Confidentiality Pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. 2.803 and the importation rules in 47 C.F.R. 2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. 1. Internal Photographs 2. External Photographs 3. Users manual 4. Test Set up photos Permanent Confidentiality from public disclosure indefinitely. 1. Block Diagram 2. Schematics Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document 3. Operational Description / Software Security For U-NII Devices It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued.

: LITE-ON TECHNOLOGY CORP.

: Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City, 23585 Taiwan Sincerely, Applicant Address Signature E-mail Tel. Name and Job Title.

: TC Wu, Deputy Director(R & D Division) _________________________________

: TC.Wu@liteon.com

: +886-2-2222-6181 ext.8301

Declaration of Multiple Models Date: November 30, 2021 We, LITE-ON TECHNOLOGY CORP., hereby declare under our responsibility that the following products are electrical identical except for the difference. FCC ID: PPQ-WPX8988 Product Name: Wireless Access Point Model WPX8988 WAP-1 WPX8988-1 Brand LITEON PoEWit LITEON Difference Contain Radio 3 module (QCA9886) YES YES NO In addition, the model WPX8988-1 has the following differences:

1. Remove DVDD33_PCIE and VDD_3P3_radio power net: R137 and R7093. 2. Remove PCIe connector and level shifter: J1, C7252, C7268, Q26, Q27, and Q50. And 2 screw holes: J13 and J14. 3. Remove Sniffer LED control: Q7 and R7232 4. Remove 2pcs 5GHz Sniffer Antennas 5. Remove PCIE Sniffer Radio 3 (QCA9886, 802.11a/b/g/n/ac, 5G Only) The models listed above are identical in circuitry and electrical, mechanical and physical Detailed contact information for this declaration has been listed below as the window of any issues relevant for this declaration.

: LITE-ON TECHNOLOGY CORP.

: Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City, 23585 Taiwan construction. Sincerely, Applicant Address Signature

Name and Job Title.

: TC Wu, Deputy Director(R & D Division) _________________________________ E-mail Tel.

: TC.Wu@liteon.com

: +886-2-2222-6181 ext.8301

Letter of Authorization Date: November 30, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 FCC ID: PPQ-WPX8988 Product Name: Wireless Access Point To whom it may concern:

Subject: Product Certification Representative Authorization Letter We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address

: No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Name

: Leo Huang Job Title : Manager e-mail

: Leohuang@sporton.com.tw We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent.

: LITE-ON TECHNOLOGY CORP.

: Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City, 23585 Taiwan Applicant Address Signature

Name and Job Title.

: TC Wu, Deputy Director(R & D Division) _________________________________ E-mail Tel.

: TC.Wu@liteon.com

: +886-2-2222-6181 ext.8301

Date: November 30, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Professional Installation Attestation FCC ID: PPQ-WPX8988 Product Name: Wireless Access Point To whom it may concern:

We, the undersigned, hereby declares that the device will be distributed through a controlled distribution channels. This device is not intended for sale to the general public. Professional training and support is provided as part of the Authorized Partner programs.

: LITE-ON TECHNOLOGY CORP.

: Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City, 23585 Taiwan Sincerely, Applicant Address Signature E-mail Tel.

Name and Job Title.

: TC Wu, Deputy Director(R & D Division) _________________________________

: TC.Wu@liteon.com

: +886-2-2222-6181 ext.8301

Date: November 30, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 To Whom it may concern, Subject: Declaration of composite/rated equipment for FCC ID: PPQ-WPX8988 We, the undersigned, would like to declare that the composite portion catagorized as Class B personal computers and peripherals has been authorized under the Supplier's Declaration of Conformity (SDoC) procedures.

: LITE-ON TECHNOLOGY CORP.

: Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City, 23585 Taiwan Sincerely, Applicant Address Signature

Name and Job Title.

: TC Wu, Deputy Director(R & D Division) _________________________________ E-mail Tel.

: TC.Wu@liteon.com

: +886-2-2222-6181 ext.8301