Mouse for Dell QSG_1.ai 2007/2/8/P| U 15:16:27 Mouse for Dell QSG_1.ai 2007/2/8/P| U 15:16:27 Setting Up Your Dell BT Travel Mouse (Part 1) CAUTION:
Before you set up and operate your Dell computer, read and follow the safety instructions in your computer Owners Manual. Note: If you have the Widcomm Bluetooth Software installed or run the Microsoft Vista OS on a Dell notebook computer, complete the steps on part 2 or part 3. If you have the Toshiba Bluetooth Software installed on a Dell notebook computer, complete the following steps:
All required mouse software is pre-installed on your notebook computer. If you must restore this software, insert the Setup CD-ROM, and then follow the on-screen instructions (about 5 minutes).Note: To uninstall your mouse software, in the Windows Control Panel, click Add/Remove Programs, and then remove the SetPoint program. 1 2 3 Turn off any other Bluetooth-enabled mice, because during setup, the receiver may detect such devices if they are in the 33 foot (10 meter) signal range. B. In the Windows taskbar at the bottom of the screen, right-click , click Start Bluetooth, follow the instructions to activate Bluetooth, and then double-click . Insert two batteries into your mouse, and then turn it on (I). On Off On Off On Off On Off On Off C. In the Bluetooth Settings window that appears, click New Connection. A. Do one of the following:
If your computers Bluetooth LED is on (blue), proceed to step B. If your computers Bluetooth LED is off, please follow your computers user manual to enable the Bluetooth radio. D. When the Add New Connection Wizard appears, press the Bluetooth button on your mouse for 2 seconds, and then click Next in the Add New Connection Wizard. Note: Be sure to complete steps E and F within 3 minutes; otherwise, return to step B. Bluetooth E. Wait for a minimum of 20 seconds while the Searching for Bluetooth devices window appears to let your computer connect with your mouse. F. When the connection is complete and Dell BT Travel Mouse appears in the list, select the mouse, and click next. G. Close the Bluetooth setting window that appears (With Dell BT Travel Mouse in the list) by clicking X in the upper-right corner. C M Y CM MY CY CMY K Setting Up Your Dell BT Travel Mouse (Part 2) CAUTION:
Before you set up and operate your Dell computer, read and follow the safety instructions in your computer Owners Manual. Note: If you have the Toshiba Bluetooth Software installed or run the Microsoft Vista OS on a Dell notebook computer, complete the steps on part 1 or part 3. If you have the Widcomm Bluetooth Software installed on a Dell notebook computer, complete the following steps:
All required mouse software is pre-installed on your notebook computer. If you must restore this software, insert the Setup CD-ROM, and then follow the on-screen instructions (about 5 minutes).Note: To uninstall your mouse software, in the Windows Control Panel, click Add/Remove Programs, and then remove the SetPoint program. 1 2 3 Turn off any other Bluetooth-enabled mice, because during setup, the receiver may detect such devices if they are in the 33 foot (10 meter) signal range. Insert two batteries into your mouse, and then turn it on (I). On Off On Off On Off On Off On Off A. Do one of the following:
If your computers Bluetooth LED is on (blue), proceed to step B. If your computers Bluetooth LED is off, please follow your computers user manual to enable the Bluetooth radio. B. In the Windows taskbar at the bottom of the screen, right-click , click Start Using Bluetooth, follow the instructions to activate Bluetooth, right click , and then click Bluetooth Setup Wizard. E. When the Bluetooth Device Selection window appears, press the Bluetooth button on your mouse for 2 seconds, and then wait a minimum of 20 seconds until Dell BT Travel Mouse appears in the list. Bluetooth Setting Up Your Dell BT Travel Mouse (Part 3) C. In the Bluetooth Settings window that appears, click Next. F. In the Bluetooth Device Selection window, double-click Dell BT Travel Mouse to let your computer connect with your mouse. E. When the Bluetooth Device Selection window appears, press the Bluetooth button on your mouse D. In the Bluetooth Service Selection window that appears, select Human Interface Device, and then click Next. G. In the Confirmation Required window that appears, click Click here before the countdown reaches zero to confirm that the correct mouse is connected. CAUTION:
Before you set up and operate your Dell computer, read and follow the safety instructions in your computer Owners Manual. Note: If you have the Widcomm Bluetooth Software and Toshiba Bluetooth Software installed or run the Microsoft Vista OS on a Dell notebook computer, complete the steps on part 1 or part 2. If you have the Microsoft Vista Operation System installed on a Dell notebook computer, complete the following steps:
All required mouse software is pre-installed on your notebook computer. If you must restore this software, insert the Setup CD-ROM, and then follow the on-screen instructions (about 5 minutes).Note: To uninstall your mouse software, in the Windows Control Panel, click Add/Remove Programs, and then remove the SetPoint program. Mouse for Dell QSG 2.ai 2007/2/8/P| U 15:00:44 Mouse for Dell QSG 2.ai 2007/2/8/P| U 15:00:44 Turn off any other Bluetooth-enabled mice, because during setup, the receiver may detect such devices if they are in the 33 foot (10 meter) signal range. B. In the Windows taskbar at the bottom of the screen, click Start, click Control Panel. In the Control Panel, make sure the window is switched to Classic View, and then double-click the Bluetooth devices. E. In the Add Bluetooth Device Wizard window, wait for a minimum of 20 seconds until Dell BT Travel Mouse appears in the list, select the mouse, and click next Insert two batteries into your mouse, and then turn it on (I). On Off On Off On Off On Off On Off C. In the Bluetooth Devices window that apprears, click Add. F. In the next page, check Dont use a passkey, and click next A. Do one of the following:
If your computers Bluetooth LED is on (blue), proceed to step B. If your computers Bluetooth LED is off, please follow your computers user manual to enable the Bluetooth radio. D. Press the Bluetooth button on your mouse for 2 seconds, and the Blue LED on the mouse should start blinking. Proceed to check the My device is set up and ready to be found, click next. G. In the last page, click Finish, and your computer now is connected with your mouse. Please repeat the process if you failed to set up the mouse. Bluetooth Getting to Know Your Mouse (Part 4) Troubleshooting Your Mouse (Part 5) Verify the contents of your package. Mouse AA Batteries (2) Setup CD-ROM Connection Issues?
A Verify that the batteries are new and properly inserted and that the mouse is turned on
(from step 2) B If you still experience connection issues, restart your computer. D E F If you run the Microsoft Vista OS on your system, go to step F. If you run the Microsoft XP OS on your system, verify that your Bluetooth software is installed properly on your notebook computer and ensure that you started Bluetooth by right-clicking in the taskbar. In the Windows taskbar at the bottom of the screen, right-click , click the Options menu, and then do the following to review your Bluetooth software version:
If the About menu command appears, click it to display Bluetooth stack for Windows by Toshiba. If the Advanced Configuration menu command appears, click it to display Widcomm Bluetooth Software. Do one of the following:
If you have Toshiba Bluetooth Software for Dell on your notebook computer, refer to page 1. If you have Widcomm Bluetooth Software for Dell on your notebook computer, refer to page 2. If you have Microsoft Vista OS on your notebook computer, refer to page 3. Blue (flashing)Bluetooth discovery indicator appears after you press the Bluetooth button on the bottom of the mouse and indicates the devices readiness to be found by the notebook PC. Blue (solid)Connection established indicator appears when the receiver finds your mouse, and then turns off after several seconds. C If you still experience connection issues, do one of the following:
If your computers Bluetooth LED is on (blue), proceed to step D. If your computers Bluetooth LED is off, please follow your computers user manual to enable the Bluetooth radio. G Complete steps 1 to 3 in Setting Up Your Dell BT Travel Mouse to set up your mouse again. 1 2 3 C M Y CM MY CY CMY K Right Left Forward Back Scroll (with left/right tilt) Amber (flashing)Low battery indicator appears when you need to replace batteries. Adjusting Your Mouse Movement Speed (Part 6) To customize mouse settings, in the Windows taskbar at the bottom of the screen, click , and then click Device Setting. Check the Windows taskbar at the bottom of the screen, and confirm if Dell SetPoint Software is properly installed. If the icon is in the taskbar, adjust the mouse movement speed in Dell SetPoint Software
(Recommended) by following steps below, A. In the Windows taskbar at the bottom of the screen, double-click on the B. Click on the "My Mouse" tab in SetPoint, and select "Dell BT Travel Mouse" from the pull-down menu C. Click on the to the Mouse Movement page D. Hold the left-click on the "Pointer Speed" bar, and move it to the right will increase the pointer speed E. Hold the left-click on the "Pointer Speed" bar, and move it to the left will decrease the pointer speed If the icon is not in the taskbar, please install the software first from your SetUp CD-ROM
(Recommended); or, adjust the mouse movement speed in Microsoft Vista OS by following steps below, A. In the Windows taskbar at the bottom of the screen, click on the "Start" and then click on the
"Control Panel"
B. Under "Control Panel", click on "Hardware and Sound", and then click on "Mouse" to the "Mouse Properties" Page C. Click on the "Pointer Options" tab to the mouse movement page D. Hold the left-click on the "Pointer Speed" bar, and move it to the right will increase the pointer speed E. Hold the left-click on the "Pointer Speed" bar, and move it to the left will decrease the pointer speed Waste Electrical and Electronic Equipment (WEEE) Directive In the European Union, this label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. For information on how to recycle this product responsibly in your country, please visit: www.euro.dell.com/recycling. ______________________ Information in this document is subject to change without notice. 2007 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used inthisdocument to refer to either the entities claiming the marks andnames or their products. Dell Inc. disclaims any proprietary interest intrademarks and trade names other than its own. w w w . d e l l . c o m | s u p p o r t . d e l l . c o m Printed in China Impreso en China Imprim en Chine Impresso na China