DynaProx EMV Contactless/NFC Card Reader Installation and Operation Manual October 2021 Document Number:
D998200490-10 REGISTERED TO ISO 9001:2015 MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com Copyright 2006 - 2021 MagTek, Inc. Printed in the United States of America INFORMATION IN THIS PUBLICATION IS SUBJECT TO CHANGE WITHOUT NOTICE AND MAY CONTAIN TECHNICAL INACCURACIES OR GRAPHICAL DISCREPANCIES. CHANGES OR IMPROVEMENTS MADE TO THIS PRODUCT WILL BE UPDATED IN THE NEXT PUBLICATION RELEASE. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MAGTEK, INC. SOME FEATURES AND FUNCTIONS MAY BE DOCUMENTED, BUT NOT AVAILABLE WITH THE CURRENT RELEASE OF THE PRODUCT. PLEASE CONTACT YOUR MAGTEK REPRESENTATIVE FOR QUESTIONS ABOUT SPECIFIC FEATURES AND FUNCTIONS AND WHEN THEY ARE SCHEDULED TO BECOME AVAILABLE. MagTek, MagnePrint, and MagneSafe are registered trademarks of MagTek, Inc. Magensa is a trademark of MagTek, Inc. AAMVA is a trademark of AAMVA. American Express and EXPRESSPAY FROM AMERICAN EXPRESS are registered trademarks of American Express Marketing & Development Corp. D-PAYMENT APPLICATION SPECIFICATION is a registered trademark to Discover Financial Services CORPORATION MasterCard is a registered trademark and PayPass and Tap & Go are trademarks of MasterCard International Incorporated. Visa and Visa payWave are registered trademarks of Visa International Service Association. ANSI, the ANSI logo, and numerous other identifiers containing "ANSI" are registered trademarks, service marks, and accreditation marks of the American National Standards Institute (ANSI). ISO is a registered trademark of the International Organization for Standardization. UL and the UL logo are trademarks of UL LLC. PCI Security Standards Council is a registered trademark of the PCI Security Standards Council, LLC. EMV is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four graduating arcs, is a trademark owned by and used with permission of EMVCo, LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MagTek is under license. Google Play store, Google Wallet payment service, and Android platform are trademarks of Google Inc. Apple Pay, iPhone, iPod, Mac, and OS X are registered trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple. Inc. App StoreSM is a service mark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used by Apple Inc. under license. Microsoft, Windows, and .NET are registered trademarks of Microsoft Corporation. All other system names and product names are the property of their respective owners. DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 2 of 55 (D998200490-10) Table 1-1 - Revisions Rev Number Date Introductory Oct 28, 2021 Initial release Notes DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 3 of 55 (D998200490-10) LIMITED WARRANTY MagTek warrants that the products sold pursuant to this Agreement will perform in accordance with MagTeks published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from MagTek (the Warranty Period). This warranty shall apply only to the Buyer (the original purchaser, unless that entity resells the product as authorized by MagTek, in which event this warranty shall apply only to the first repurchaser). During the Warranty Period, should this product fail to conform to MagTeks specifications, MagTek will, at its option, repair or replace this product at no additional charge except as set forth below. Repair parts and replacement products will be furnished on an exchange basis and will be either reconditioned or new. All replaced parts and products become the property of MagTek. This limited warranty does not include service to repair damage to the product resulting from accident, disaster, unreasonable use, misuse, abuse, negligence, or modification of the product not authorized by MagTek. MagTek reserves the right to examine the alleged defective goods to determine whether the warranty is applicable. Without limiting the generality of the foregoing, MagTek specifically disclaims any liability or warranty for goods resold in other than MagTeks original packages, and for goods modified, altered, or treated without authorization by MagTek. Service may be obtained by delivering the product during the warranty period to MagTek (1710 Apollo Court, Seal Beach, CA 90740). If this product is delivered by mail or by an equivalent shipping carrier, the customer agrees to insure the product or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location, and to use the original shipping container or equivalent. MagTek will return the product, prepaid, via a three (3) day shipping service. A Return Material Authorization (RMA) number must accompany all returns. Buyers may obtain an RMA number by contacting MagTek Support Services at (888) 624-8350. EACH BUYER UNDERSTANDS THAT THIS MAGTEK PRODUCT IS OFFERED AS-IS. MAGTEK MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAGTEK DISCLAIMS ANY WARRANTY OF ANY OTHER KIND, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF THIS PRODUCT DOES NOT CONFORM TO MAGTEKS SPECIFICATIONS, THE SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. MAGTEKS LIABILITY, IF ANY, SHALL IN NO EVENT EXCEED THE TOTAL AMOUNT PAID TO MAGTEK UNDER THIS AGREEMENT. IN NO EVENT WILL MAGTEK BE LIABLE TO THE BUYER FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF, OR INABILITY TO USE, SUCH PRODUCT, EVEN IF MAGTEK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 4 of 55 (D998200490-10) LIMITATION ON LIABILITY EXCEPT AS PROVIDED IN THE SECTIONS RELATING TO MAGTEKS LIMITED WARRANTY, MAGTEKS LIABILITY UNDER THIS AGREEMENT IS LIMITED TO THE CONTRACT PRICE OF THIS PRODUCT. MAGTEK MAKES NO OTHER WARRANTIES WITH RESPECT TO THE PRODUCT, EXPRESSED OR IMPLIED, EXCEPT AS MAY BE STATED IN THIS AGREEMENT, AND MAGTEK DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MAGTEK SHALL NOT BE LIABLE FOR CONTINGENT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES TO PERSONS OR PROPERTY. MAGTEK FURTHER LIMITS ITS LIABILITY OF ANY KIND WITH RESPECT TO THE PRODUCT, INCLUDING NEGLIGENCE ON ITS PART, TO THE CONTRACT PRICE FOR THE GOODS. MAGTEKS SOLE LIABILITY AND BUYERS EXCLUSIVE REMEDIES ARE STATED IN THIS SECTION AND IN THE SECTION RELATING TO MAGTEKS LIMITED WARRANTY. DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 5 of 55 (D998200490-10) FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by MagTek could void the users authority to operate this equipment. CANADIAN DECLARATION OF CONFORMITY This digital apparatus does not exceed the Class B limits for radio noise from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe B prescrites dans le Rglement sur le brouillage radiolectrique dict par le ministre des Communications du Canada. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conform la norme NMB-003 du Canada. INNOVATION, SCIENCE AND ECONOMIC DEVELOPEMENT CANADA (ISED) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) L'appareil ne doit pas produire de brouillage, et (2) L'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Testing for compliance with CE requirements was performed by an independent laboratory. The unit under test was found compliant with standards established for Class B devices. CE STANDARDS DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 6 of 55 (D998200490-10) EU STATEMENT Hereby, MagTek Inc. declares that the radio equipment types Wideband Transmission System (802.11 wireless and Bluetooth Low Energy), and Non-Specific Short Range Device (contactless) are in compliance with Directive 2014/53/EU. The full text of the EU declarations of conformity is available at the following internet addresses:
<Reserved> For DynaProx with no barcode reader, USB connection
<Reserved> for DynaProx with barcode reader, USB connection UKCA STANDARDS Testing for compliance with UKCA requirements was performed by an independent laboratory. The unit under test was found compliant with standards established for Class B devices. UKCA STATEMENT Hereby, MagTek Inc. declares that the radio equipment types Wideband Transmission System (802.11 wireless and Bluetooth Low Energy), and Non-Specific Short Range Device (contactless) are in compliance with Radio Equipment Regulations 2017. The full text of the UKCA declarations of conformity is available at the following internet addresses:
<Reserved> For DynaProx with no barcode reader, USB connection
<Reserved> for DynaProx with barcode reader, USB connection AUSTRALIA / NEW ZEALAND STATEMENT Testing for compliance with AS/NZS standards was performed by a registered and accredited laboratory. The unit under test was found compliant with standards established under AS/NZS CISPR 32 (2013), AS/NZS 4268 Table 1, Row 59 DTS 2400-2483MHz SRD (802.11), and AS/NZS 4268 (2017) Table 1, Row 43 13.553-13.567MHz (contactless reader). This product is recognized per UL 60950-1, 2nd Edition, 2011-12-19 (Information Technology Equipment - Safety - Part 1: General Requirements), CSA C22.2 No. 60950-1-07, 2nd Edition, 2011-12 (Information Technology Equipment - Safety - Part 1: General Requirements). UL/CSA ROHS STATEMENT When ordered as RoHS compliant, this product meets the Electrical and Electronic Equipment (EEE) Reduction of Hazardous Substances (RoHS) European Directive 2002/95/EC. The marking is clearly recognizable, either as written words like Pb-free, lead-free, or as another clear symbol (
). PCI STATEMENT PCI Security Standards Council, LLC (PCI SSC) has approved this PTS POI device (SCR class) to be compliant with the PCI PTS POI Security Requirements v5.1. When granted, PCI SSC approval is provided by PCI SSC to ensure certain security and operational characteristics important to the achievement of PCI SSCs goals, but PCI SSC approval does not under any circumstances include any endorsement or warranty regarding the functionality, quality or performance of any particular product or service. PCI SSC does not warrant any products or services provided by third parties. PCI SSC approval does not under any circumstances include or imply any product warranties from PCI SSC, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by PCI SSC. All rights and remedies regarding products and services which have received PCI SSC approval shall be provided by the party providing such products or services, and not by PCI SSC. DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 7 of 55 (D998200490-10) 1 - Introduction Introduction 1 DynaProx and DynaProx BCR are ready to launch your payment environment to the next level. All DynaProx products offer an integrated secure card reader authenticator (SCRA) contactless EMV chip cards and NFC enabled mobile wallets including Samsung Pay, Google Pay, and Apple Pay. DynaProx BCR models offer a scan engine for 1D and 2D barcodes. DynaProx products deliver smart solutions for companies that need the most flexibility in the smallest form factor at a great price. DynaProx product features include:
Multiple Payment Methods. Secure card reader authenticator for:
o EMV contactless cards o NFC capable devices Security o MagneSafe Security Architecture o Triple DEA encryption/DUKPT key management o AES 128 encryption/DUKPT key management o MagnePrint card authentication o Device/host authentication o PCI-Secure Reading and Exchange of Data (SRED) o Suitable for PCI-P2PE Solutions DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 8 of 55 (D998200490-10) 1 - Introduction Table 1-1 - Available Models and Options Part No. Description Display Connection(s) TBD TBD DYNAPROX DYNAPROX, BCR None None USB-C, RS-232 USB-C, RS-232 All models are black by default and have countertop, handheld, and custom mounting options. Table 1-2 - DynaProx Accessories Part #
Description Accessory Notes CABLE, USB A - C, 6FT, DYNAPROX Included with DynaProx products CABLE, USB C - C, 6FT, DYNAPROX Optional, specify in order CHARGING CRADLE, DYNAPROX Optional, specify in order CLEANING CARD, DOUBLE SIDED Optional, specify in order FOOT, BACK, MICROSUCTION, DYNAPROX Optional, specify 2 ea. in order for complete replacement 1000005405 FOOT, FRONT, MICROSUCTION, DYNAPROX Optional, specify in order TBD TBD TBD TBD TBD DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 9 of 55 (D998200490-10) 1 - Introduction 1.1 Stable and Secure Performance DynaProx reading locations are visible to the cardholder on the face of the device. 1.2 Compatible with Multiple Operating Systems DynaProx products are very flexible. They work with a large number of host platforms, including Android and Windows. DynaProx products use a USB connection, or RS-232 for custom applications. 1.3 The Power of Flexibility DynaProx products are countertop, mounted, or handheld / mobile devices. They can be used for traditional brick-and-mortar points of sale, mounted to a touchscreen, or brought to the table. Custom colors and silkscreened logos are available with a minimum order size. 1.4 MagneSafe Security Architecture DynaProx products adhere to MagTeks MagneSafe Security Architecture, which is based on dynamic encryption, authentication, and tokenization, and protects cardholder data from the moment of swipe, dip, or tap. They read cards, wearables, and mobile wallets. They are also PCI-SRED compliant, making them perfect for P2PE solutions. 1.5 Magensa Services Couple DynaProx products with Magensa Services to make your certification cycle easier and remove unencrypted data from your environment. A service representative will work with you to determine if Magensa Decrypt, Magensa Decrypt and Forward, or the Magensa Payment Protection Gateway is best for you. As always, MagTeks developer tools including our royalty free software developer kits (SDKs) with API libraries are readily available 365/24/7 on our web site. For faster development, you can use our MagneFlex browser and middleware; your code can be written once and deployed on multiple operating systems. The data is unpacked, parsed, and sent to its destination faster and easier. DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 10 of 55 (D998200490-10) 1 - Introduction 1.6 About DynaProx Components Figure 1-1 shows the major components of DynaProx with barcode reader. Figure 1-1 - DynaProx with Barcode Reader Major Components DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 11 of 55 (D998200490-10) 1 - Introduction 1.7 About Terminology In this document, DynaProx products are referred to as the device. They are designed to be connected to a host, which is a piece of general-purpose electronic equipment which can send commands and data to, and receive data from, the device. Host types include PC and Mac computers/laptops, tablets, and smartphones. Generally, the host must have software installed that communicates with the device and is capable of processing transactions. During a transaction, the host and its software interact with the operator, such as a customer service representative, while the device interacts with the cardholder (even if the cardholder is using a virtual representation of the card account, such as a smartphone). DynaProx| EMV Contactless/NFC Card Reader | Installation and Operation Manual Page 12 of 55 (D998200490-10)