FCC ID: U73-21079837 tDynamo GEN II

tDynamo Gen Model: 21079837 Manual December 2019 Version 001 Content 1 Installation Guide .............................2 2 Operation Guide ..................................3-8 3 Transactions Guide .9 1 1. Installation Guide 1.1 tDynamo Gen has two parts. 1.2 tDynamo Gen can be used alone, also can be used on the support . 2 2 Operation Guide There are three kinds of usage 2.1.1 First, press the button after using Bluetooth link equipment. 2.1.2 Second, on the card reader Connect the USB type - C interface, the other end is inserted into the host with USB interface, and then turn on power supply. 3 2.1.3 Third, put the reader into the base, with the base USB inserted into the host. Turn on power supply. 4 2.2 To use a MSR card Swipe card, make sure the MSR is on the bottom side, press the card to the bottom of the slot and swipe. 5 2.3 To use an IC card Make sure the IC contacts are on the top side. Insert the card to the end of the slot. 6 2.4 To use a NFC card Place the card near the NFC symbol on the case. 7 8 3 Transactions Guide Refer to the guide of the software. FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The distance between user and device should be no less than 20cm. 9 This product can be used across EU member states. We declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. RF Specification Bluetooth Operation Frequency:

Maximum Power(V4.0):

24022480MHz 5.34 dBm NFC Operation Frequency:

Maximum Power:

13.56MHz 38.80 dBuA/m@3m Manufacturer: Magtek Incorporated Address of Manufacturer: 1710 Apollo Court, Seal Beach, California 90740, United States The operating temperature of the device between 0C to 40C. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

U73-21079837 U73-21079837 U73-21079837 MAGTEK Magtek Incorporated 1710 Apollo Court, Seal Beach, California 90740, United States Importer:XXXXXXX Importer Add:XXXXXXX THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,14 including interference that may cause undesired operation. 21079837 FCC ID: U73-21079837 Rated 5V 1A S/N : xxxxxxx 2019-12-10 US Patent No. 7,673,799 and others

Magtek Incorporated Agent Authorization Company: Magtek Incorporated Address: 1710 Apollo Court, seal beach, California 90740, United States Product Name: tDynamo GEN II Model Number(s): 21079837 Product Description: tDynamo GEN II We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2021-02-26 Name:

Hamid Manesh Title:

Manager Company: Magtek Incorporated

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Date: 2021-02-26 Subject; Request for Long Term Confidentiality FCC ID: U73-21079837 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature:

Name: Hamid Manesh Title: Manager Company: Magtek Incorporated