FCC ID: 2AH9Q-MXHP002A xTool Smart Control Transceiver

xTool _V._D.._

*mm

*mm gg CMYK Smart Control User Manual Statement Safety rst (important) List of items Specications Meet your smart control Preparations Use the device Error code description How to charge the smart control?

Declaration of conformity After-sales services 01 01 02 02 03 04 10 11 12 13 13 Statement Thank you for choosing xTool products!

If you use the product for the rst time, read carefully all the accompanying materials of the product to improve your experience with it. If you do not use the product according to the instructions and requirements of the Manual, or mis-operate the product due to misunderstanding, etc., the Company shall bear no responsibility for any loss resulting therefrom. The Company has collated the content of the Manual rigorously and carefully, but errors or omissions may remain. The Company is committed to continuously improving product functions and service quality, and therefore reserves the right to change any product or software described in the Manual and the content of the Manual at any time. The Manual is intended to help you use the product properly and does not include any description of hardware and software conguration. For product conguration, refer to the related contract (if any) and packing list, or consult your distributor. Images in the Manual are for reference only and the actual product may vary. Protected by copyright laws and regulations, the Manual shall not be reproduced or transcribed in any way, or be transmitted on any wired or wireless network in any manner, or be translated into any language, or be modied in any way, such as content, image, or layout modication, without the prior written authorization of the Company. The Company is committed to continuously improving the product and related materials. The product and the Manual are subject to change, and updates can be found at xtool.com. Safety rst (important) Read and get familiar with all safety precautions and measures before using this product. Strictly follow all safety precautions. Ensure that this product is properly assembled and is working properly. Follow the operating principles:

List of items Smart control Transceiver USB cable User manual Specications xTool Smart Control Transceiver Size 117.2 mm x 91.4 mm x 35.1 mm Temperature setting range 100 ~ 205 212 ~ 400 Check the product for damage every time before you use it. Do not operate it in any way when any damage or defect is found. Time setting range 0s ~ 600s Ensure that the workspace is clean and at. Do not leave the product unattended during operation. Pay attention to whether it is working properly. The machine works properly at the temperature of 10 to 35 and can be stored at the temperature of 10 to 45. Do not operate it at a temperature lower than 0. 01 Model Input MXH-P002a-001 5V 100mA Maximum RF transmit power 2.4G(2420-2470MHz)< 20 dBm FCC ID IC 2AH9Q-MXHP002A 22796-MXHP002A 02 Meet your smart control Screen Preparations Connect to a power supply Level switch button Start button Temperature unit switch Temperature setting knob Time setting knob USB port (Type-C) Power switch Battery level Level Smart Press Auto Module connection icon Smart Control pairing icon Unit of temperature Temperature Time Unit of time 03 04 Working state indicator Pairing button Pair with the Smart Control Blinking blue Hold down for 3s Toggle the switch to ON Insert the transceiver Hold down for 3s 05 Blinking Stopping blinking, pairing succeeded 06 Smart Control settings 1. Switch between preset levels 2. Dene a level yourself Press to switch the level between A, B, C, and D Level Temperature Time A B C D 07 140 285 160 320 195 385 205 400 30s 30s 50s 60s Press Select a level Turn the knobs to adjust the temperature and time Hold down 3s to save your setting as the level 08 3. Set the time and temperature directly Turn the knobs to adjust the temperature and time Use the device The usage of the smart control may vary according to heat pressing devices. Visit support.xtool.com or scan the following QR code to nd details about how to use xTool devices with the smart control. Press the level switch button at level D to exit the level mode, and then set the time and temperature. 09 10 Error code description How to charge the Smart Control?

Error code Description Error code Description Exceptions occur on the temperature sensor on the heating plate. The temperature sensor is damaged. The heating plate cannot be heated. The temperature of the heating plate does not go as expected. The temperature of the heating plate does not go as expected. Exceptions occur on the temperature sensor on the circuit board. The radiating ns are overheated. Exceptions occur when the heating plate is heated. Exceptions occur when the heating plate is heated. Exceptions occur when the heating plate is heated. Exceptions occur on the wireless chip. If you see any error code displayed on the screen, contact xTool team for help. 11 12 Declaration of conformity EN Hereby, Makeblock Co., Ltd., declares that this product is in compliance IT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

la Makeblock Co., Ltd., con la presente dichiara che questo prodotto

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause FCC statement with the essential requirements and other relevant provisions of Directive conforme ai requisiti essenziali ed alle altre disposizioni pertinenti alla undesired operation. RED 2014/53/EU and the RoHS directive 2011/65/EU. direttiva RED 2014/53/UE e della direttiva RoHS 2011/65/UE. DE Hiermit erklrt Makeblock Co., Ltd., dass dieses Produkt die grundlegen-

ES Makeblock Co. Ltd. declara por la presente que este producto cumple los den Anforderungen und anderen relevanten Vorschriften der Richtlinie requisitos esenciales y otras disposiciones pertinentes de la directiva RED RED 2014/53/EU und der RoHS-Richtlinie 2011/65/EU einhlt. 2014/53/UE y la directiva RoHS 2011/65/UE. PT Pelo presente, a Makeblock Co., Ltd., declara que este produto est em con FR Makeblock Co., Ltd. dclare par la prsente que ce produit est conforme ormidade com os requisitos essenciais e outras disposies relevantes da aux principales exigences et autres dispositions pertinentes de la directive Diretiva RED 2014/53/UE e da Diretiva RoHS 2011/65/UE. Directive RED 2014/53/UE et de la directive RoHS 2011/65/UE. After-sales services For technical support, contact us at support@xtool.com. For more information about after-sales services, visit support.xtool.com. 13 Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC radiation exposure statement(For Smart Control Transceiver) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. RF warning statement:(For Smart Control) The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

- English: "

This device complies with Industry Canada licence-exempt RSS standard(

s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device."

- French:"

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

Label FCC ID: 2AH9Q-MXHP002A IC: 22796-MXHP002A Location The product is too small to place complete label information, so the label is placed in the user manual and package.

- Makeblock Co., Ltd. -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 8/18/2023 Makeblock Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:

[2AH9Q-MXHP002A]):

Name and company of U.S. agent: XTL US INC. Physical U.S. address of agent: 16035 ARROWHWY. IRWNDALE Calfornia, 91706, US FRN of U.S. agent: 0033617879 Email address of U.S. agent:John.liu @makeblock.com XTL US INC. acknowledges their obligation to accept service of process on behalf of Makeblock Co., Ltd.. Makeblock Co., Ltd. with the FRN [0025548553]accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name]Wei Wang

[Title]Manager 4 0 V

[Company] Makeblock Co., Ltd.

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Name of U.S. agent] John Liu

[Title of U.S. agent]Manager

[Company of U.S. agent] XTL US INC. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Makeblock Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/23/23 To whom it may concern:

We, [Makeblock Co., Ltd.], hereby certify that the equipment for which authorization is sought (FCC ID:

[2AH9Q-MXHP002A]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, 2 0 V

, U

) i i

d n a Signature

[Larry Feng]

[Quality Manager]

[Makeblock Co., Ltd.]

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6 The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.